Activity
From 12/16/2013 to 01/14/2014
01/13/2014
- 03:39 pm Revision 47387ccb: Break line longer than 80 chars in configure.ac
- Signed-off-by: Klaus Aehlig <aehlig@google.com>
Reviewed-by: Jose Lopes <jabolopes@google.com> - 02:41 pm Revision 11a0e343: Technical writing: improve documentation and glossary
- Improve structure and content on the main documentation page of Ganeti
and the glossary.
Signed-off-by: Betsy Beyer ... - 02:16 pm Revision a347cdc6: configure: allow detection of Sphinx 1.2+
- The regular expression used for parsing the Sphinx version does not work
with Sphinx versions after 1.1, as reported ... - 12:10 pm Revision 02d17fe3: Remove deprecated _ERROR_DATA_KEY in QMP
- Commit de253f14 of QEMU repo "BREAKS QMP's compatibility for
the error response" as it removes "data" key from qmp er...
01/10/2014
- 02:19 pm Revision 4a67e386: Run postupgrade hook after upgrade
- To allow for necessary last-moment adaptions, of the new cluster,
we run the post-upgrade hook of the target version,... - 02:19 pm Revision 1ef0324f: Provide path to post-upgrade
- Signed-off-by: Klaus Aehlig <aehlig@google.com>
Reviewed-by: Petr Pudlak <pudlak@google.com> - 02:19 pm Revision fba59beb: Add an empty post-upgrade hook
- As 2.10 is the first version from which you can do automatic upgrades,
there is nothing to do when going to any other... - 02:19 pm Revision 4d765a17: design: support post-upgrade hooks
- While the general policy for Ganeti is to just accept the situation
it finds after being upgraded from an older versi... - 02:19 pm Revision 3cac836b: Also add the current version to the intent-to-upgrade file
- Our design states, that the intent-to-upgrade file contains "the current
version of ganeti, the version to change to,...
01/09/2014
- 06:17 pm Revision 310c246f: Technical writing: improve main documentation page
- Improve structure and content on the main documentation page of
Ganeti.
Signed-off-by: Betsy Beyer <bbeyer@google.co... - 01:22 pm Revision 02a6b50a: Improve backwards compatibility of Issue 649 fix
- Commit e6e4ff4cf8d0100f331f94f7a27aa1e03a5d0e7d fixed Issue 649 by switching the
separator for usb_devices from comma...
01/07/2014
- 06:09 pm Revision d7f27a3e: Add missing NEWS entries from stable-2.8
- Some fixes where pushed to the stable-2.8 branch without a corresponding NEWS
entry. This patch adds them.
Signed-of... - 05:52 pm Revision e6e4ff4c: Change usb_devices separator to whitespace
- The usb_devices parameter was using comma as a list separator, but this cannot
work because comma is already used as ...
12/20/2013
- 11:34 am Revision 4fdfdb26: Update the NEWS file with the Issue 640 fix
- Add an entry in the NEWS file describing the fix of Issue 640.
Signed-off-by: Michele Tartara <mtartara@google.com>
... - 11:34 am Revision 6ee8fdd3: Ensure that all the hypervisors exist in the config file
- All the hypervisors are supposed to exist in the config file, but it might not
be so after upgrades from old versions... - 11:34 am Revision 52a988f2: Fix testEncodeInstance test input
- The input of the testEncodeInstance test was not adherent to the actual format
of the Ganeti configuration file: kvm ...
12/17/2013
- 01:11 pm Revision 74d2fa21: Bump new upstream version
- Signed-off-by: Dimitris Aragiorgis <dimara@grnet.gr>
- 01:01 pm Revision b60e353a: Merge branch 'stable-2.8.4-grnet' into debian-2.8.4-grnet
- 01:00 pm Revision cc1d9016: (packaging) Add vcs-version file
- Signed-off-by: Dimitris Aragiorgis <dimara@grnet.gr>
- 12:56 pm Revision d396d21e: Change source package to snf-ganeti
- ..and make ganeti2 dummy package depend on snf-ganeti.
Signed-off-by: Dimitris Aragiorgis <dimara@grnet.gr> - 12:56 pm Revision 27e874da: Add new debian/changelog section
- Signed-off-by: Dimitris Aragiorgis <dimara@grnet.gr>
- 12:56 pm Revision cb49d1f5: Run ./autogen.sh before configure
- This is needed so that packaging can be done by using official
src tree found on git repo.
Official debian packages ... - 12:56 pm Revision 4f64f422: Remove debian patch that cannot apply
- Since we run autogen.sh inside debian rules Makefile.in is not
included in original source tree and thus a debian pat... - 12:56 pm Revision b6772b46: Rename ganeti.* debian files to snf-ganeti.*
- Change genscript.py to search for those files
Signed-off-by: Dimitris Aragiorgis <dimara@grnet.gr> - 12:56 pm Revision c55058f4: ganeti -> snf-ganeti in debian/rules
- override dh_install init, cron, logrotate with --name option.
Additional changes:
- Let ganeti run as root
- Do no... - 12:56 pm Revision 42591fbb: Remove debian patch that does not apply on 2.8
- Signed-off-by: Dimitris Aragiorgis <dimara@grnet.gr>
- 12:56 pm Revision ed88923f: ganeti -> snf-ganeti in debian/control
- snf-ganeti Provides, Replaces, Conflicts ganeti
ganeti-haskell replaces snf-ganeti
- /usr/share/man/man8/ganeti-conf... - 12:56 pm Revision 45b6a5b4: Import debian files from wheezy-backports
- Signed-off-by: Dimitris Aragiorgis <dimara@grnet.gr>
- 12:46 pm Revision 2e1b72ee: (ipfix) Allow NICs with mode=routed and ip=none
- This allows us to define an IPv6 only network (currently with a
dummy IPv4 network) with connectivity mode 'routed' a... - 12:46 pm Revision a82a94e1: (ext) Do not remove disks if --keep-disks and DT_EXT
- Signed-off-by: Dimitris Aragiorgis <dimara@grnet.gr>
- 12:46 pm Revision f14863bc: (kvm) Add migration capabilities if supported
- This just adds two monitor commands before migration
in order to optimize performance. If the migrate_set_capability
... - 12:46 pm Revision 9209d947: (ext) Pass disk geometry in kvm command
- Currently we allow this feature only for ext templates that
allow arbitrary params per disk. If both 'heads' and 'sec... - 12:46 pm Revision 566853c4: (ext) Override disk_cache hvp with disk param in ext
- This is a hack that brings disk_cache hypervisor param
at disk level. This is supported only for disks of ext
templat... - 12:46 pm Revision 50fc5dfc: (ext) Export logical_id info to hooks env
- DISK_ID as the second part of logical_id
Signed-off-by: Dimitris Aragiorgis <dimara@grnet.gr> - 12:46 pm Revision 11e90588: (b64) Use base64 encoding in networks' bitarrays
- This is needed for GRNET'S production environment.
Signed-off-by: Dimitris Aragiorgis <dimara@grnet.gr> - 12:46 pm Revision 06c2fb4a: (snap) Snapshot support for ExtStorage
- Extend existing RPC params with the snapshot name and
add allow snapshot not only for LVM but also for EXT.
Signed-o... - 12:46 pm Revision f44c88c7: (grnet) Enable -device option for old disks upon migration
- Change _GenerateDeviceKVMId() to take device index as an
extra argument. In case device has uuid and pci info
we retu... - 12:46 pm Revision d0ccd946: (grnet) Remove deprecated idx slot from NIC/Disk objects
- This code will run when reading old kvm runtime files created
by hot-plugging related code back in Ganeti 2.6.2
Sign... - 12:46 pm Revision 150e31ec: (grnet) Move disk options before nic ones in kvm command
- Older versions of Ganeti did ensure that during startup
disk devices will be inserted before nic devices in PCI
confi... - 12:46 pm Revision e2800fca: (2.10) Introduce _UpgradeSerializedRuntime() method
- This method is invoked during _AnalizeSerializedRuntime() and is
meant to modify runtime files in the way cfgupgrade ... - 12:46 pm Revision 0500f6fd: (grnet) Hotplug: cfgupgrade for deprecated fields
- Add cfgupgrade so that we remove any deprecated fields hotplug
implementation used in the past.
Signed-off-by: Dimit... - 12:46 pm Revision 6ba0093c: (2.10) Export NIC's UUID and name to network scripts
- In case of kvm None values are not allowed in env dict
so we have to add name only if not None.
In case of Xen since... - 12:46 pm Revision 7d4ae909: (2.10) Export tags via GetTags() to network scripts
- Use GetTags() instance method in order to export instance tags
to NIC configuration scripts and files of kvm and xen ... - 12:46 pm Revision 45ba54c4: (2.10) Use HooksDict() to export network options in Xen
- Remove duplicate code that exports network options to environment
variables.
Signed-off-by: Dimitris Aragiorgis <dim... - 12:46 pm Revision 569f47dd: (2.10) Fix net-common script in case of routed mode
- setup_route should run in case or routed mode and not
openvswitch.
Signed-off-by: Dimitris Aragiorgis <dimara@grnet.... - 12:46 pm Revision 22001b78: (2.10) RAPI: Make use of request_body in Reboot/Remove
- Until now, the shutdown_timeout parameter could only be passed to
ShutdownInstance() inside kwargs, causing it to be ... - 12:46 pm Revision e7a77eb8: (2.10) Introduce --hotplug-if-possible option
- This will be useful for an external entity using RAPI that
wants to modify devices of instances.
The common use case... - 12:46 pm Revision bdf3ba80: (2.10) Mark cluster's IPs as externally reserved
- Currently, upon network creation, nodes' and master's IPs
are reserved in the pool.
This leads to pool reservations ... - 12:46 pm Revision e5370111: (2.10) Allow instances to obtain externally reserved IPs
- The administrator should be able to assign an externally reserved IP
to a Ganeti instance manually, if desired. Curre... - 12:46 pm Revision 52fc37bd: (2.10) RAPI: Pass depends body arg (if any) to opcode
- Most rlib2 classes override the default _GetDefaultData() method with
custom methods that parse a request's body and ... - 12:46 pm Revision 9de92521: (2.10) SimpleRetry on BlockDev.Remove()
- Sometimes, upon disk removal, corresponding file descriptors
are kept briefly open by various processes (hypervisor, ... - 12:46 pm Revision caf74756: (2.10) Check if hotplug is supported in CheckPrereq
- Introduce new RPC hotplug_supported that invokes the corresponding
hypervisor's method which checks if hotplug is gen... - 12:46 pm Revision 4c6e8e1a: (2.10) Minor changes regarding hotplug support
- * Mention restrictions in NEWS
- RBD userspace access mode
- In case of a downgrade instances should suffer a reb... - 12:46 pm Revision 1c6c4d6d: (2.10) drive_del after device_del in disk hot-remove
- This is needed so that qemu process really releases the
corresponding file descriptor and thus we can dmsetup/lvremov... - 12:46 pm Revision d05afa85: (2.10) Fix in RPC
- Use _SingleDiskDictDP() instead of _ObjectDict() for serializing
a disk.
Signed-off-by: Dimitris Aragiorgis <dimara@... - 12:46 pm Revision 9f395c32: (2.10) Make hotplug related method raise HotplugError
- Hotplug is not supported by default and thus we raise
HotplugError() for hotplug related methods.
If a hypervisor wan... - 12:46 pm Revision 4a44d8aa: (2.10) block_devices -> kvm_disks renaming
- and a couple more styple fixes.
block_devices are misleading so rename them to kvm_disk (just like kvm_nics)
Signed-... - 12:46 pm Revision e419e42f: (2.10) Some fixes in _GenerateKVMBlockDevicesOptions()
- * Add docstring.
* fix missed usecase of boot_disk=False if kernel_path is given.
* Use devlist arg in GenerateKVMBlo... - 12:46 pm Revision dcedd81a: (2.10) Add unittests for Hotplug support
- Try base InstanceSetParams tests that modify instance's
devices with hotplug=True.
Add some unittests for kvm hyperv... - 12:46 pm Revision 67c450d1: (2.10) Hotplug: Update manpages and NEWS
- Add --hotplug entry in gnt-instance manpage.
Add NEWS entry for hotplug support.
In both cases mention that hotplug i... - 12:46 pm Revision d7185512: (2.10) Extend qa to test hotplug support
- Only if default hypervisor is KVM try all hotplug related actions.
Signed-off-by: Dimitris Aragiorgis <dimara@grnet.... - 12:46 pm Revision 97cf0763: (fix) SetDiskID() before blockdev_assemble()
- Before blockdev_assemble we call SetDiskID() in order to fill up
physical_id of disk needed by bdev.Assemble and even... - 12:46 pm Revision 82b948e4: (2.10) Hotplug: client support
- Add --hotplug option. Only used in OpInstanceSetParams.
If this is omitted, modifications become effective after rebo... - 12:46 pm Revision 9b28d122: (2.10) Return link_name in blockdev_assemble rpc
- Until now this RPC returned only dev_path. Since we use it in
hotplug we have to know the simlink of the device so th... - 12:46 pm Revision e8e50805: (2.10) Hotplug: cmdlib support
- Hotplugging is done by functions invoked by ApplyContainerMods(). In
order hotplugging to take place the --hotplug op... - 12:46 pm Revision 860bf930: (2.10) Hotplug: rpc support
- Introduce new RPC that eventually invoke hypervisor specific
hotplug functions. In order to be generic it has the fol... - 12:46 pm Revision 172a75dc: (2.10) Extract socket related code from QmpMonitor class
- Separate unix socket related code from QmpMonitor class and
make the latter extend the newly introduced one: MonitorS... - 12:46 pm Revision af2f716d: (2.10) Introduce hotplug methods (hypervisor inteface)
- 4 new methods: HotAddDevice, HotDelDevice, HotModDevice, HotplugSupported
All these are the hypervisor interface with... - 12:46 pm Revision 0288e7bf: (2.10) Use -device with pci info if possible
- Extend kvm_cmd with -device option for the case of paravirual
Disks and NICs.
Signed-off-by: Dimitris Aragiorgis <di... - 12:46 pm Revision d7583563: (2.10) Helper methods that check for hotplug support
- Hotplug is currently *not* supported for:
- KVM < 1.0
- existing devices in the cluster
- python-fdsend module is... - 12:46 pm Revision 8b7be6f2: (2.10) Helper methods for PCI slots and device ids
- Device naming:
QEMU monitor expects devices to be uniquely named. Device ids derive
from the following function:
kvm_... - 12:46 pm Revision 58502c9e: (2.10) Prepare block_devices runtime entry
- With this patch we add another entry in runtime files along with
kvm_cmd, kvm_nics, and hvparams. block_devices that ... - 12:46 pm Revision 277a9de7: (fix) Remove uri slot from block_devices
- In stable-2.10 we have userspace access mode for rbd. Backend
calculates uri along with link and dev_path. Thus we ha... - 12:46 pm Revision 8e1c6109: (2.10) Hotplug: objects and constants additions
- Add pci slot in NIC/Disk objects. This slot will be used only
by hypervisor code. Currently only KVM will use it and ... - 12:46 pm Revision ece1057c: (2.10) Introduce _GenerateKVMBlockDevicesOptions()
- Simply move logic that generates block device related
options out of _GenerateKVMRuntime().
NOTE: Back-port correspo... - 12:46 pm Revision 994ccaf2: (2.10) Prepare kvm options to support -device for disks
- Newer kvm version support -device driver,... option where available
drivers can be found by running kvm -device ? com... - 12:46 pm Revision 2c04ae0d: (2.9) Refactor NIC configuration scripts
- Add new script vif-ganeti that could be used instead of
default vif-bridge in order NIC customization can be more
fle... - 12:46 pm Revision fa466513: (2.9) Document vif-ganeti usage
- In order to be able to use it as vif-script one has to
create a symbolic link inside /etc/xen/scripts pointing
to /us... - 12:46 pm Revision adea59b3: (2.8r) Workaround for Issue 621
- Upon LUNetworkDisconnect() and LUNetworkConnect() try to acquire
all cluster's instances.
By that _LS_ACQUIRE_ALL ac... - 12:46 pm Revision 865cdc2e: (2.9) Make NIC setup more flexible in case of Xen
- For every NIC write down a file that contains NIC's
info (MAC, mode, link, network details), that can
be sourced by a...
12/16/2013
- 06:55 pm Revision 3eaa6e1d: Merge branch 'stable-2.8' into stable-2.9
- * stable-2.8
Add support for blktap2 file-driver
Update opcodes test to include network tags
Make network tags ... - 05:53 pm Revision a5c50971: Version bump for 2.10.0~rc1
- Signed-off-by: Thomas Thrainer <thomasth@google.com>
Reviewed-by: Michele Tartara <mtartara@google.com> - 05:53 pm Revision 890fdff7: Update NEWS for 2.10.0 rc1 release
- Mention inherited changes as well as the (very few) changes made to
stable-2.10 since beta1.
Signed-off-by: Thomas T... - 05:53 pm Revision 4a65d4fd: Fix pylint 0.26.0/Python 2.7 warning
- pylint 0.26.0 on Python 2.7 generates a warning on the string '\ ',
recommending to use the r prefix. This patch adds... - 05:53 pm Revision bd341bff: Update INSTALL and devnotes for 2.10 release
- The following changes are made:
* Add M4 as required dependency
* Change reference to qemu-img package to qemu-util... - 05:53 pm Revision 7bc2c097: Add support for blktap2 file-driver
- Newer Xen versions use blktap2 instead of blktap. This patch adds support
for it in Ganeti.
Fixes Issue 638.
Signed... - 05:31 pm Revision a4c589d2: Add network tag tests to QA
- The QA did not have a test for network tags until now, and this patch
remedies the situation.
Signed-off-by: Hrvoje ... - 05:31 pm Revision 95e00de7: Update opcodes test to include network tags
- This patch adds the network tags to the list of all other tag types
that can be tried in QuickCheck tests.
Signed-of... - 05:31 pm Revision 36ccc662: Make network tags searchable
- This patch adds the network tags to the tags searched by gnt-cluster
search-tags, and in the process cleans up the co... - 05:31 pm Revision 92ea7d79: Fix RAPI network tag handling
- The network tags were absent from an if check used to actually list
tags. The patch fixes the oversight, and adds a p... - 05:31 pm Revision 9d0b521e: Fix gnt-network list-tags
- Define network tags in haskell part.
This fixes issue 641.
Signed-off-by: Dimitris Aragiorgis <dimara@grnet.gr>
Rev... - 12:37 pm Revision c486fb6c: Merge branch 'stable-2.9' into stable-2.10
- * stable-2.9
Bump revision for 2.9.2
Update NEWS for 2.9.2 release
Pass hvparams to GetInstanceInfo
Adapt par...
Also available in: Atom