| Branch: | Tag: | Revision:

root / lib / hypervisor / @ 637ce7f9

History | View | Annotate | Download (21.3 kB)

# Date Author Comment
637ce7f9 01/27/2009 01:31 pm Guido Trotter

KVM: implement GetShellCommandForConsole

This is a class method, because it calls _InstanceSerial, which is
another class method. The patch changes it to classmethod for all the
hypervisor classes.

Reviewed-by: iustinp

0df4d98a 01/27/2009 01:30 pm Guido Trotter

KVM: classify _Instance{Monitor,Serial,KVMRuntime}

Those methods need nothing from the instantiated class, and just
manipulate strings, and fetch some class global variables, so they can
be classmethods.

Reviewed-by: iustinp

50cb2e2a 01/23/2009 07:02 pm Guido Trotter

Xen and KVM: correct a typo when checking args

A missing 'be' was present in the error string for both xen and kvm,
when the kernel or initrd path was not absolute.

Reviewed-by: imsnah

c087266c 01/21/2009 08:23 pm Guido Trotter

KVM live migration: handle failure

If the KVM live migration ends up in a 'failed' state it has been
aborted at the kvm level, and the machine is still running locally.
We support also the 'cancelled' state even though there should be no way
of reaching it, without manual intervention....

90c024f6 01/21/2009 08:23 pm Guido Trotter

KVM: change a few IOError with EnvironmentError

Reviewed-by: iustinp

30e42c4e 01/21/2009 08:23 pm Guido Trotter

KVM: instance migration

The tcp port used for migrating KVM instances is selectable at
./configure time. We use a single port as nodes are locked anyway during
a migration, so no two migrations can happen at the same time to the
same node.

Reviewed-by: iustinp

1f8b3a27 01/21/2009 08:22 pm Guido Trotter

KVM: add the _InstancePidAlive function

Throughout the kvm code we very often look for the instance pidfile
name, read it, and check if the process is alive. Abstract this into a
private function and use that one instead.

This patch also changes RebootInstance to check whether the instance is...

f02881e0 01/21/2009 08:22 pm Guido Trotter

KVM: fix RebootInstance

RebootInstance was broken, because it just used to call StartInstance
with wrong parameters. With this patch we still stop the instance, but
use the saved kvm runtime to start it again.

Reviewed-by: iustinp

6567aff3 01/21/2009 08:22 pm Guido Trotter

KVM: retry the instance shutdown command

When we ask the instance to shutdown sometimes the command won't work,
especially if the instance isn't fully booted up. We'll wait for a bit,
and give it a few chances before giving up.

Reviewed-by: iustinp

38e250ba 01/21/2009 11:55 am Guido Trotter

KVM: save and remove the KVM runtime

At instance startup time we save the kvm runtime, and at stop time we
delete it. This patch also includes a function to load the kvm runtime,
which is unused yet.

Reviewed-by: iustinp

ee5f20b0 01/21/2009 11:55 am Guido Trotter

KVM: split KVM runtime generation and startup

Before we used to generate the kvm command line and then just run it.
With this patch we split the generation from the time it is run,
allowing us to save it and replay it at reboot.

We must take special care about instance nics:...

a1d79fc6 01/20/2009 08:12 pm Guido Trotter

KVM: add a _CONF_DIR

Currently we keep pid files and control files. In the conf dir we'll
also keep the data to start the instance anew, and the network
interface scripts. These will then be copied to a separate area (since
_CONF_DIR could be mounted 'noexec') and used to start the instance....

c4fbefc8 01/20/2009 08:12 pm Guido Trotter

KVM: Remove sockets after shutdown

Abstract the monitor and serial socket naming in two functions, and
reuse them to cleanup the files after shutdown.

Reviewed-by: iustinp

c4469f75 01/20/2009 08:11 pm Guido Trotter

KVM: fix class docstring

Reviewed-by: iustinp

069cfbf1 01/07/2009 07:01 pm Iustin Pop

Simplify hypervisor block_devices structure

This is a partial forward-port of commit 1136 on the 1.2 branch:

The hypervisor doesn't need to be passed the whole block device
structure, so we'll just give it the block device name on the local
node, and the name as seen by the instance. This will make it easier to...
14aa53cb 12/16/2008 06:24 pm Guido Trotter

KVM: improve socat interface

Call socat with a full path specified at configure time, rather than
just by its name, and check for the binary to exist at hypervisor

Reviewed-by: iustinp

08137f9e 12/14/2008 02:04 pm Iustin Pop

cleanup: kvm code likes to redefine names

Reviewed-by: amishchenko

c41eea6e 12/11/2008 07:13 pm Iustin Pop

Fix epydoc format warnings

This patch should fix all outstanding epydoc parsing errors; as such, we
switch epydoc into verbose mode so that any new errors will be visible.

Reviewed-by: imsnah

8a74a9b9 12/02/2008 12:54 pm Guido Trotter

KVMHypervisor add two missing 'constants.'

Some calls to the HV parameters were missing them.

Reviewed-by: imsnah

47387b1e 12/02/2008 12:54 pm Guido Trotter

KVMHypervisor fix to case misspellings

Reviewed-by: imsnah

6b5605e8 10/14/2008 05:47 pm Iustin Pop

Convert the KVM hypervisor to hvparams

I'm not sure which parameters it should use, I took all I saw in the
code. Update: ultrotter says the list is OK for now.

Reviewed-by: ultrotter

8b3fd458 10/14/2008 02:29 pm Iustin Pop

Change hypervisors to use the beparams

This patch changes the hypervisor functions to use the beparams dict
instead of the instance attributes.

Reviewed-by: ultrotter

d47d3d38 08/13/2008 07:41 pm Guido Trotter

KVM Hypervisor Cleanup

- Remove a few experiemental code lines left as comments
- Rework first disks' boot=on addition, which was calculated twice
- Remove an empty line
- Remove reference to hvm_pae which doesn't apply to kvm

Reviewed-by: imsnah

eb58f9b1 08/13/2008 05:25 pm Guido Trotter

Add KVM hypervisor code contains the code for ganeti to work under kvm.
This patch also modifies to ship that file, and
lib/hypervisor/ to import it, and add kvm to the
hypervisors map.

Reviewed-by: imsnah