Synnefo » snf-ganeti » ganeti-local

	doc/design-daemons.rst \

==========================

Ganeti daemons refactoring

==========================

.. contents:: :depth: 2

This is a design document detailing the plan for refactoring the internal

structure of Ganeti, and particularly the set of daemons it is divided into.

Current state and shortcomings

==============================

Ganeti is comprised of a growing number of daemons, each dealing with part of

the tasks the cluster has to face, and communicating with the other daemons

using a variety of protocols.

Specifically, as of Ganeti 2.8, the situation is as follows:

``Master daemon (MasterD)``

  It is responsible for managing the entire cluster, and it's written in Python.

  It is executed on a single node (the master node). It receives the commands

  given by the cluster administrator (through the remote API daemon or the

  command line tools) over the LUXI protocol.  The master daemon is responsible

  for creating and managing the jobs that will execute such commands, and for

  managing the locks that ensure the cluster will not incur in race conditions.

  Each job is managed by a separate Python thread, that interacts with the node

  daemons via RPC calls.

  The master daemon is also responsible for managing the configuration of the

  cluster, changing it when required by some job. It is also responsible for

  copying the configuration to the other master candidates after updating it.

``RAPI daemon (RapiD)``

  It is written in Python and runs on the master node only. It waits for

  requests issued remotely through the remote API protocol. Then, it forwards

  them, using the LUXI protocol, to the master daemon (if they are commands) or

  to the query daemon if they are queries about the configuration (including

  live status) of the cluster.

``Node daemon (NodeD)``

  It is written in Python. It runs on all the nodes. It is responsible for

  receiving the master requests over RPC and execute them, using the appropriate

  backend (hypervisors, DRBD, LVM, etc.). It also receives requests over RPC for

  the execution of queries gathering live data on behalf of the query daemon.

``Configuration daemon (ConfD)``

  It is written in Haskell. It runs on all the master candidates. Since the

  configuration is replicated only on the master node, this daemon exists in

  order to provide information about the configuration to nodes needing them.

  The requests are done through ConfD's own protocol, HMAC signed,

  implemented over UDP, and meant to be used by parallely querying all the

  master candidates (or a subset thereof) and getting the most up to date

  answer. This is meant as a way to provide a robust service even in case master

  is temporarily unavailable.

``Query daemon (QueryD)``

  It is written in Haskell. It runs on all the master candidates. It replies

  to Luxi queries about the current status of the system, including live data it

  obtains by querying the node daemons through RPCs.

``Monitoring daemon (MonD)``

  It is written in Haskell. It runs on all nodes, including the ones that are

  not vm-capable. It is meant to provide information on the status of the

  system. Such information is related only to the specific node the daemon is

  running on, and it is provided as JSON encoded data over HTTP, to be easily

  readable by external tools.

  The monitoring daemon communicates with ConfD to get information about the

  configuration of the cluster. The choice of communicating with ConfD instead

  of MasterD allows it to obtain configuration information even when the cluster

  is heavily degraded (e.g.: when master and some, but not all, of the master

  candidates are unreachable).

The current structure of the Ganeti daemons is inefficient because there are

many different protocols involved, and each daemon needs to be able to use

multiple ones, and has to deal with doing different things, thus making

sometimes unclear which daemon is responsible for performing a specific task.

Also, with the current configuration, jobs are managed by the master daemon

using python threads. This makes terminating a job after it has started a

difficult operation, and it is the main reason why this is not possible yet.

The master daemon currently has too many different tasks, that could be handled

better if split among different daemons.

Proposed changes

================

In order to improve on the current situation, a new daemon subdivision is

proposed, and presented hereafter.

.. digraph:: "new-daemons-structure"

  {rank=same; RConfD LuxiD;}

  {rank=same; Jobs rconfigdata;}

  node [shape=box]

  RapiD [label="RapiD [M]"]

  LuxiD [label="LuxiD [M]"]

  WConfD [label="WConfD [M]"]

  Jobs [label="Jobs [M]"]

  RConfD [label="RConfD [MC]"]

  MonD [label="MonD [All]"]

  NodeD [label="NodeD [All]"]

  Clients [label="gnt-*\nclients [M]"]

  p1 [shape=none, label=""]

  p2 [shape=none, label=""]

  p3 [shape=none, label=""]

  p4 [shape=none, label=""]

  configdata [shape=none, label="config.data"]

  rconfigdata [shape=none, label="config.data\n[MC copy]"]

  locksdata [shape=none, label="locks.data"]

  RapiD -> LuxiD [label="LUXI"]

  LuxiD -> WConfD [label="WConfD\nproto"]

  LuxiD -> Jobs [label="fork/exec"]

  Jobs -> WConfD [label="WConfD\nproto"]

  Jobs -> NodeD [label="RPC"]

  LuxiD -> NodeD [label="RPC"]

  rconfigdata -> RConfD

  configdata -> rconfigdata [label="sync via\nNodeD RPC"]

  WConfD -> NodeD [label="RPC"]

  WConfD -> configdata

  WConfD -> locksdata

  MonD -> RConfD [label="RConfD\nproto"]

  Clients -> LuxiD [label="LUXI"]

  p1 -> MonD [label="MonD proto"]

  p2 -> RapiD [label="RAPI"]

  p3 -> RConfD [label="RConfD\nproto"]

  p4 -> Clients [label="CLI"]

``LUXI daemon (LuxiD)``

  It will be written in Haskell. It will run on the master node and it will be

  the only LUXI server, replying to all the LUXI queries. These includes both

  the queries about the live configuration of the cluster, previously served by

  QueryD, and the commands actually changing the status of the cluster by

  submitting jobs. Therefore, this daemon will also be the one responsible with

  managing the job queue. When a job needs to be executed, the LuxiD will spawn

  a separate process tasked with the execution of that specific job, thus making

  it easier to terminate the job itself, if needeed.  When a job requires locks,

  LuxiD will request them from WConfD.

  In order to keep availability of the cluster in case of failure of the master

  node, LuxiD will replicate the job queue to the other master candidates, by

  RPCs to the NodeD running there (the choice of RPCs for this task might be

  reviewed at a second time, after implementing this design).

``Configuration management daemon (WConfD)``

  It will run on the master node and it will be responsible for the management

  of the authoritative copy of the cluster configuration (that is, it will be

  the daemon actually modifying the ``config.data`` file). All the requests of

  configuration changes will have to pass through this daemon, and will be

  performed using a LUXI-like protocol ("WConfD proto" in the graph. The exact

  protocol will be defined in the separate design document that will detail the

  WConfD separation).  Having a single point of configuration management will

  also allow Ganeti to get rid of possible race conditions due to concurrent

  modifications of the configuration.  When the configuration is updated, it

  will have to push the received changes to the other master candidates, via

  RPCs, so that RConfD daemons and (in case of a failure on the master node)

  the WConfD daemon on the new master can access an up-to-date version of it

  (the choice of RPCs for this task might be reviewed at a second time). This

  daemon will also be the one responsible for managing the locks, granting them

  to the jobs requesting them, and taking care of freeing them up if the jobs

  holding them crash or are terminated before releasing them.  In order to do

  this, each job, after being spawned by LuxiD, will open a local unix socket

  that will be used to communicate with it, and will be destroyed when the job

  terminates.  LuxiD will be able to check, after a timeout, whether the job is

  still running by connecting here, and to ask WConfD to forcefully remove the

  locks if the socket is closed.

  Also, WConfD should hold a serialized list of the locks and their owners in a

  file (``locks.data``), so that it can keep track of their status in case it

  crashes and needs to be restarted (by asking LuxiD which of them are still

  running).

  Interaction with this daemon will be performed using Unix sockets.

``Configuration query daemon (RConfD)``

  It is written in Haskell, and it corresponds to the old ConfD. It will run on

  all the master candidates and it will serve information about the the static

  configuration of the cluster (the one contained in ``config.data``). The

  provided information will be highly available (as in: a response will be

  available as long as a stable-enough connection between the client and at

  least one working master candidate is available) and its freshness will be

  best effort (the most recent reply from any of the master candidates will be

  returned, but it might still be older than the one available through WConfD).

  The information will be served through the ConfD protocol.

``Rapi daemon (RapiD)``

  It remains basically unchanged, with the only difference that all of its LUXI

  query are directed towards LuxiD instead of being split between MasterD and

  QueryD.

``Monitoring daemon (MonD)``

  It remains unaffected by the changes in this design document. It will just get

  some of the data it needs from RConfD instead of the old ConfD, but the

  interfaces of the two are identical.

``Node daemon (NodeD)``

  It remains unaffected by the changes proposed in the design document. The only

  difference being that it will receive its RPCs from LuxiD (for job queue

  replication), from WConfD (for configuration replication) and for the

  processes executing single jobs (for all the operations to be performed by

  nodes) instead of receiving them just from MasterD.

This restructuring will allow us to reorganize and improve the codebase,

introducing cleaner interfaces and giving well defined and more restricted tasks

to each daemon.

Furthermore, having more well-defined interfaces will allow us to have easier

upgrade procedures, and to work towards the possibility of upgrading single

components of a cluster one at a time, without the need for immediately

upgrading the entire cluster in a single step.

Implementation

==============

While performing this refactoring, we aim to increase the amount of

Haskell code, thus benefiting from the additional type safety provided by its

wide compile-time checks. In particular, all the job queue management and the

configuration management daemon will be written in Haskell, taking over the role

currently fulfilled by Python code executed as part of MasterD.

The changes describe by this design document are quite extensive, therefore they

will not be implemented all at the same time, but through a sequence of steps,

leaving the codebase in a consistent and usable state.

#. Rename QueryD to LuxiD.

   A part of LuxiD, the one replying to configuration

   queries including live information about the system, already exists in the

   form of QueryD. This is being renamed to LuxiD, and will form the first part

   of the new daemon. NB: this is happening starting from Ganeti 2.8. At the

   beginning, only the already existing queries will be replied to by LuxiD.

   More queries will be implemented in the next versions.

#. Let LuxiD be the interface for the queries and MasterD be their executor.

   Currently, MasterD is the only responsible for receiving and executing LUXI

   queries, and for managing the jobs they create.

   Receiving the queries and managing the job queue will be extracted from

   MasterD into LuxiD.

   Actually executing jobs will still be done by MasterD, that contains all the

   logic for doing that and for properly managing locks and the configuration.

   A separate design document will detail how the system will decide which jobs

   to send over for execution, and how to rate-limit them.

#. Extract WConfD from MasterD.

   The logic for managing the configuration file is factored out to the

   dedicated WConfD daemon. All configuration changes, currently executed

   directly by MasterD, will be changed to be IPC requests sent to the new

   daemon.

#. Extract locking management from MasterD.

   The logic for managing and granting locks is extracted to WConfD as well.

   Locks will not be taken directly anymore, but asked via IPC to WConfD.

   This step can be executed on its own or at the same time as the previous one.

#. Jobs are executed as processes.

   The logic for running jobs is rewritten so that each job can be managed by an

   independent process. LuxiD will spawn a new (Python) process for every single

   job. The RPCs will remain unchanged, and the LU code will stay as is as much

   as possible.

   MasterD will cease to exist as a deamon on its own at this point, but not

   before.

Further considerations

======================

There is a possibility that a job will finish performing its task while LuxiD

and/or WConfD will not be available.

In order to deal with this situation, each job will write the results of its

execution on a file. The name of this file will be known to LuxiD before

starting the job, and will be stored together with the job ID, and the

name of the job-unique socket.

The job, upon ending its execution, will signal LuxiD (through the socket), so

that it can read the result of the execution and release the locks as needed.

In case LuxiD is not available at that time, the job will just terminate without

signalling it, and writing the results on file as usual. When a new LuxiD

becomes available, it will have the most up-to-date list of running jobs

(received via replication from the former LuxiD), and go through it, cleaning up

all the terminated jobs.

.. vim: set textwidth=72 :

.. Local Variables:

.. mode: rst

.. fill-column: 72

.. End:

   design-daemons.rst