Activity
From 09/09/2010 to 10/08/2010
10/08/2010
- 01:49 pm Revision c448e855: spice: tls support
- Add options to the -spice command line switch to setup tls.
- 01:49 pm Revision 84a23f25: spice: add misc config options
- This patch adds a few more options to tweak spice server behavior.
The documentation update chunk has the details ;) - 01:49 pm Revision 333b0eeb: spice: add config options for the listening address
- Make listening address configurable. Also add options to
force using IPv4 or IPv6. - 01:49 pm Revision 17b6dea0: spice: add config options for channel security.
- This allows to enforce tls or plaintext usage for certain spice
channels.
[ v2: code style fixup ] - 01:49 pm Revision 9f04e09e: spice: make compression configurable.
- This patch adds options to the -spice command line switch to
configure image compression.
[ v2: speling fix in the d...
10/07/2010
- 10:20 pm Revision 3e18c6bf: cris: Consider the TLB valid bit on writes to the TLB
- When updating the guest TLB we only need to flush previous
mappings from the entry written if the entry was valid.
A... - 01:19 pm Revision e0c472d8: virtio: invoke set_status callback on reset
- As status is set to 0 on reset, invoke the relevant callback. This makes
for a cleaner code in devices as they don't ... - 01:19 pm Revision c8852121: vhost: error code
- fix up errors returned to include errno, not just -1
Signed-off-by: Michael S. Tsirkin <mst@redhat.com> - 01:19 pm Revision 54dd9321: virtio: change set guest notifier to per-device
- When using irqfd with vhost-net to inject interrupts,
a single evenfd might inject multiple interrupts.
Implementing ... - 01:19 pm Revision afbaa7b4: virtio-net: unify vhost-net start/stop
- Move all of vhost-net start/stop logic to a single routine,
and call it from everywhere.
Additionally, start/stop vh... - 01:19 pm Revision 010ec629: eepro100: Add support for multiple individual addresses (multiple IA)
- I reviewed the latest sources of Linux, FreeBSD and NetBSD.
They all reset the multiple IA bit (multi_ia in BSD) to z...
10/06/2010
- 07:24 pm Revision a083a89d: net: delay freeing peer host device
- With -netdev, virtio devices present offload
features to guest, depending on the backend used.
Thus, removing host ne...
10/05/2010
- 10:14 pm Revision 4447d609: Merge remote branch 'spice/submit.6' into staging
- Conflicts:
configure
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> - 09:54 pm Revision 48f57044: Merge remote branch 'qmp/for-anthony' into staging
- 09:53 pm Revision e0c8a796: linux-user: Fix typo m86k -> m68k
- Replace m86k_sim_stat by m68k_sim_stat.
Cc: Riku Voipio <riku.voipio@iki.fi>
Signed-off-by: Stefan Weil <weil@mail.b... - 09:53 pm Revision b0cd712c: Fix spelling in comments
- multifuction -> multifunction
successfull -> successful.
Signed-off-by: Stefan Weil <weil@mail.berlios.de> - 09:53 pm Revision f66724c9: Add new user mode option -ignore-environment
- An empty environment is sometimes useful in user mode.
The new option provides it for linux-user and bsd-user
(darwin... - 09:53 pm Revision dda5336e: docs: Improve documentation
- Fix some inconsistencies (tabs and punctuation)
and try to improve grammar and spelling.
Cc: Juan Quintela <quintela... - 07:38 pm Revision 999fa40e: ppc: Minor 40x MMU fixes
- * Fix swapped reading of tlblo/hi.
* Fix tlb exec permissions
Signed-off-by: John Clark <clarkjc@runbox.com>
Signed-...
10/03/2010
- 09:43 am Revision 358664cc: console: Avoid dereferencing NULL active_console
- The console_select() function does not check that active_console is
non-NULL before dereferencing it. When invoked w... - 09:41 am Revision 7fd3f494: exec: Fix compilation error for debug code
- is_softmmu was removed with commit
d4c430a80f000d722bb70287af4d4c184a8d7006,
so remove it now from debug code, too.
... - 09:41 am Revision b832134d: rc4030: Fix compilation error in debug code
- min was unknown here, so avoid it.
Cc: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Stefan Weil <weil@mail.berli... - 09:40 am Revision a4a77677: mipsnet: Fix compiler warning in debug code
- size_t needs a different format specifier, so fix this.
Cc: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Stefan ... - 09:40 am Revision d523d5d6: block/vvfat: Fix compiler warning in debug code
- Fix this compiler warning:
./block/vvfat.c:2285: error: comparison of unsigned expression >= 0 is always true
Cc: Bl... - 09:39 am Revision c9ba47dc: virtio-9p: Use GCC_FMT_ATTR and fix a format warning
- With the new gcc format warnings, gcc detected this:
/qemu/hw/virtio-9p.c:1040: error: format ‘%u’ expects type ‘uns... - 09:37 am Revision 6ea421fe: blockdev: Use GCC_FMT_ATTR (format checking)
- Additional changes:
* Removed 'extern' from drive_add (avoids too long line).
* Removed 'extern' from other function... - 09:34 am Revision 8b7968f7: Use GCC_FMT_ATTR (format checking)
- Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com> - 09:34 am Revision e5924d89: Replace most gcc format attributes by macro GCC_FMT_ATTR (format checking)
- Since version 4.4.x, gcc supports additional format attributes.
__attribute__ ((format (gnu_printf, 1, 2)))
shoul... - 09:31 am Revision 4a2b39d3: slirp: Silence warning on Haiku
- Haiku has O_BINARY in fcntl.h.
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
Cc: Jan Kiszka <jan.kiszka@web... - 09:31 am Revision 3ee66dfa: tap: Add stub for Haiku
- Adapted from AIX code.
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
Signed-off-by: Blue Swirl <blauwirbel@... - 09:31 am Revision 5dc2eec9: nbd: Haiku has _IO() in its BSD compatibility layer
- Signed-off-by: Andreas Färber <andreas.faerber@web.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com> - 09:31 am Revision aff447c9: Haiku doesn't have libm
- Math functions are integrated into Haiku's libroot.
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
Signed-of... - 09:31 am Revision bd00d539: configure: Don't rely on special pthreads library
- Haiku has pthreads integrated into its libroot.so library. No linker arguments
are needed for it, so don't fail if -l... - 09:31 am Revision 179cf400: configure: Add basic support for Haiku
- For compatibility with BeOS, Haiku's error codes are negative whereas recent
POSIX versions require them to be positi...
10/02/2010
- 05:28 pm Revision a82cdd58: trace: avoid unnecessary recompilation if nothing changed
- Add logic to detect changes in generated files. If the old
and new files are identical, don't touch the generated fil... - 05:28 pm Revision 904fe1fb: Makefile: fix config-devices.mak generation
- The logic of detecting changes in default-configs/*.mak is
flawed as can be demonstrated by 'touch default-configs/*.... - 05:27 pm Revision 3f7132d1: sysbus: fix address truncation
- Fix address truncation in sysbus by using a wider type.
Reported-by: Artyom Tarasenko <atar4qemu@googlemail.com>
Tes... - 02:12 pm Revision e6aa0f11: target-microblaze: Use %td for ptrdiff_t arguments in debug message
- According to ISO/IEC 9899:1999 7.19.6.1,
the correct length modifier for ptrdiff_t is 't', not 'z'.
Cc: Blue Swirl <... - 02:12 pm Revision 211ecdc0: target-cris: Use %td for ptrdiff_t arguments in debug message
- According to ISO/IEC 9899:1999 7.19.6.1,
the correct length modifier for ptrdiff_t is 't', not 'z'.
Cc: Blue Swirl <... - 02:04 pm Revision 3b2e3dc9: virtex: Add braces
- Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
10/01/2010
- 04:20 pm Revision 4903de0c: Monitor: Rename monitor_handler_is_async()
- Let's follow the convention introduced by the previous commit and
call it handler_is_async().
Signed-off-by: Luiz Ca... - 04:20 pm Revision de79ba6f: Monitor: Directly call QObject handlers
- This avoids handle_user_command() calling monitor_call_handler(),
which is currently shared with QMP.
Signed-off-by:... - 04:20 pm Revision fc29df75: QMP: Introduce qmp_call_cmd()
- Calls a QObject handler and emits the QMP response, also drops
monitor_call_handler() which is now unused.
Signed-of... - 04:20 pm Revision a18b2ce2: QMP/README: Update QMP homepage address
- Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
- 04:20 pm Revision acd0a093: Monitor: Rename the qemu-monitor.hx file
- Let's be consistent and call it hmp-commands.hx, so that we have
qmp-commands.hx for QMP and hmp-commands.hx for HMP.... - 04:20 pm Revision 1dcbd6f6: Monitor: Drop QMP bits from do_info()
- As of last commit, QMP doesn't use do_info() anymore. Simplify it.
Signed-off-by: Luiz Capitulino <lcapitulino@redha... - 04:20 pm Revision 0fb88582: QMP: handle_qmp_command(): Move 'cmd' sanity check
- Next commit will change how query commands are handled in a
way that the 'cmd' sanity check is also going to be neede... - 04:20 pm Revision 0e19a627: Monitor: Drop monitor_cmd_user_only()
- This function was only needed when QMP and HMP were sharing dispatch
tables, this is no longer true so just drop it.
... - 04:20 pm Revision 3e12a751: QMP: Introduce query commands dispatch table
- The new table is a copy of HMP's table, containing only QObject
handlers.
In the near future HMP will be making QMP ... - 04:20 pm Revision d4551293: Monitor: Drop is_async_return()
- If I understood it correcty, the is_async_return() logic was only
used to prevent QMP from issuing duplicated success... - 04:20 pm Revision 1162daa6: Monitor: Convert do_info() back to HMP
- This is a HMP specific handler, it makes no sense to have it
under QMP.
Signed-off-by: Luiz Capitulino <lcapitulino@... - 04:20 pm Revision 9e80721e: Monitor: Rename monitor_handler_ported()
- That name makes no sense anymore, as dispatch tables have been split,
a better name is handler_is_qobject(), which re... - 04:20 pm Revision 30f5041e: Monitor: Drop QMP info from the qemu-monitor.hx file
- QMP has its own dispatch table and documentation file
(qmp-commands.hx), we can now drop the following QMP specific i... - 04:20 pm Revision 2e061a7c: QMP: Simplify do_info_commands()
- We now iterate over QMP's dispatch tables, no need to check for
QMP-only handlers anymore.
Signed-off-by: Luiz Capit... - 04:20 pm Revision f36b4afb: QMP: Introduce command dispatch table
- Also update QMP functions to use it. The table is generated
from the qmp-commands.hx file.
From now on, QMP and HMP ... - 04:20 pm Revision 030db6e8: QMP: Don't use do_info()
- Since its inception, QMP has been using HMP's do_info() function
to run query commands.
This was a bad choice, as it... - 04:20 pm Revision bead3ce1: QMP: Introduce qmp_find_cmd()
- Next commit needs this new function: it will introduce the
the QMP's command dispatch table and qmp_find_cmd() will b... - 04:20 pm Revision 07b0403d: disable guest-provided stats on "info balloon" command
- The addition of memory stats reporting to the virtio balloon causes
the 'info balloon' command to become asynchronous... - 04:20 pm Revision d1249eaa: QMP: Small cleanup in handle_qmp_command()
- QMP has its own dispatch tables, we can now drop the following
checks:
o 'info' command: this command doesn't ex... - 04:20 pm Revision 945c5ac8: Monitor: Introduce search_dispatch_table()
- It's a generic version of monitor_find_command() which searches
the dispatch table passed as an argument.
Future com... - 04:20 pm Revision 82a56f0d: Monitor: Introduce the qmp-commands.hx file
- This file contains a copy of the following information from the
qemu-monitor.hx file:
o QObject handlers entries... - 04:12 pm Revision 212b6008: Add support for JSON pretty printing
- The monitor does not pretty-print JSON output, so that everything
will be on a single line reply. When JSON docs get ... - 04:12 pm Revision 39eaab9a: Add option to turn on JSON pretty printing in monitor
- Expaned '-mon' arg to allow a 'pretty=on' flag. This makes the
monitor pretty print its replies to easy human debuggi...
09/30/2010
- 07:53 pm Revision 2c50e26e: powerpc: Add a virtex5 ml507 refdesign board
- Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de> - 07:53 pm Revision 95070372: powerpc: Add a ppc-440x5 Xilinx model
- Add a powerpc 440x5 with the model ID on the Xilinx virtex5.
Connect the 440x5 to the 40x interrupt logic.
Signed-of...
09/29/2010
- 07:15 pm Revision 5251d6ad: tap: Remove double include of util.h
- If neither of __FreeBSD__, __FreeBSD_kernel__ and __DragonFly__ is defined,
util.h is included from tap-bsd.c.
Don't ... - 07:24 am Revision fd5723b3: pulse-audio: fix bug on updating rpos
- Fix a rpos coordination bug between qpa_run_out() and qpa_thread_out(),
which shows up as playback noises.
qpa_run_...
09/28/2010
- 07:56 am Revision 575c153f: audio: Fix memory size for resampling buffer in DAC case
- Signed-off-by: malc <av1474@comtv.ru>
09/26/2010
- 07:07 pm Revision 9fe6de94: mingw: add version information to the executables
- Add QEMU version information to the executables, based on earlier
work by C. W. Betts and Robert Riebisch.
Signed-of... - 09:57 am Revision 0ba8681e: Avoid exit in trap as it breaks with some shells
- Don't call exit in the trap handler as it causes the return code to be
zero with some buggy shells (dash and pdksh at...
09/25/2010
- 02:26 pm Revision e78815a5: Introduce qemu_madvise()
- vl.c has a Sun-specific hack to supply a prototype for madvise(),
but the call site has apparently moved to arch_init...
09/24/2010
- 11:01 pm Revision d63cb48d: powerpc: Make the decr interrupt type overridable
- Make it possible for boards to override the kind of interrupt
to be signaled when the decr timer hits. The 405's sign... - 11:01 pm Revision a586e548: powerpc: Improve emulation of the BookE MMU
- Improve the emulation of the BookE MMU to be able to boot linux
on virtex5 boards.
Signed-off-by: Edgar E. Iglesias ... - 03:09 am Revision c973a36d: fmopl: workaround for -Wempty-body
- Signed-off-by: malc <av1474@comtv.ru>
09/22/2010
- 11:15 pm Revision 9c9e7d51: Move macros GCC_ATTR and GCC_FMT_ATTR to common header file
- By moving the definition of GCC_ATTR and GCC_FMT_ATTR
from audio_int.h to qemu-common.h these macros are
now generall... - 11:05 pm Revision 80bb8cba: Fix OpenBSD build
- Add #include <sys/types.h>, needed by #include <sys/socket.h>.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com> - 10:46 pm Revision 687db4ed: block-verify: fix 32-bit build
- Reported-by: Peter Lemenkov <lemenkov@gmail.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> - 10:02 pm Revision 879f0655: Fix compilation error (missing include statement)
- ./hw/sd.c: In function ‘sd_init’:
./hw/sd.c:443: error: implicit declaration of function ‘qemu_blockalign’
./hw/sd.c:... - 01:50 am Revision e1bb0a1a: Merge remote branch 'kwolf/for-anthony' into staging
09/21/2010
- 09:55 pm Revision f36d53ef: mips_malta: Fix format strings
- Fix two compiler warnings (when format attribute is applied).
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Blue Swi... - 09:55 pm Revision 1ed1139d: mips_fulong2e: Fix format strings
- Fix two compiler warnings (when format attribute is applied)
and one error (missing %) in format strings.
Cc: Aureli... - 09:54 pm Revision 91f16900: trace: Fix user emulator dependency on trace objects
- On a clean build, after generating trace.h, make would recurse into *-*-user
without a clue how to build ../trace.o (... - 07:36 pm Revision 869564a9: spice: add tablet support
- Add support for the spice tablet interface. The tablet interface will
be registered (and then used by the spice clie... - 07:36 pm Revision a3e22260: spice: simple display
- With that patch applied you'll actually see the guests screen in the
spice client. This does *not* bring qxl and ful... - 07:36 pm Revision 78dd9ac1: spice: add mouse
- Open mouse channel. Now you can move the guests mouse pointer.
No tablet / absolute positioning (yet) though. - 07:36 pm Revision 29b0040b: spice: core bits
- Add -spice command line switch. Has support setting passwd and port for
now. With this patch applied the spice clie... - 07:36 pm Revision 864401c2: spice: add keyboard
- Open keyboard channel. Now you can type into the spice client and the
keyboard events are sent to your guest. You'l... - 07:36 pm Revision cd4ec0b4: add spice into the configure file
- 07:35 pm Revision 6b62dc2d: Use display types for local display only.
- This patch drops DT_VNC. The display types are only used to select
select the local display (i.e. curses, sdl, coca,... - 07:35 pm Revision da1d85e3: configure: add logging
- Write compile commands and messages to config.log.
Useful for debugging configure. - 07:35 pm Revision 526c5237: Use machine_init() to register virtfs config options.
- 07:35 pm Revision d6d94fc3: add pflib: PixelFormat conversion library.
- 06:00 pm Revision d9d33417: blkverify: Add block driver for verifying I/O
- The blkverify block driver makes investigating image format data
corruption much easier. A raw image initialized wit... - 04:39 pm Revision 6f5f060b: qcow2: Avoid bounce buffers for AIO write requests
- qcow2 used to use bounce buffers for any AIO requests. This does not only imply
unnecessary copying, but also unbound... - 04:39 pm Revision f8b6d672: scsi-generic: add missing reset handler
- Ensure that pending requests of a SCSI generic device are purged on
system reset. This also avoids calling a NULL fun... - 04:39 pm Revision a5e3d9ef: scsi_bus: fix length and xfer_mode for RESERVE and RELEASE commands
- For the RESERVE and RELEASE commands the length must be zero
and xfer_mode must be SCSI_XFER_NONE.
Signed-off-by: Be... - 04:39 pm Revision 1b2adf28: ide: propagate the required alignment
- IDE is a bit ugly in this respect. For one it doesn't really keep track
of a sector size - most of the protocol is i... - 04:39 pm Revision 1c4c2814: qcow2: Move sync out of update_refcount
- Note that the flush is omitted intentionally in qcow2_free_clusters. If
anything, we can leak clusters here if we los... - 04:39 pm Revision ac48e389: vvfat: Fix segfault on write to read-only disk
- vvfat tries to set the readonly flag in its open function, but nowadays
this is overwritted with the readonly=... com... - 04:39 pm Revision 29216ed1: qcow2: Move sync out of qcow2_alloc_clusters
- Signed-off-by: Kevin Wolf <kwolf@redhat.com>
- 04:39 pm Revision a655211a: vvfat: Use cache=unsafe
- The qcow file used for write support in vvfat is a temporary file,
so we can use cache=unsafe there. Without this, wr... - 04:39 pm Revision 9217e26f: vvfat: Fix double free for opening the image rw
- Allocation and deallocation of bs->opaque is not in the control of a
block driver. Therefore it should not set bs->op... - 04:39 pm Revision 73fdb1e1: scsi-disk: propagate the required alignment
- Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com> - 04:39 pm Revision 581b9e29: raw-posix: handle > 512 byte alignment correctly
- Replace the hardcoded handling of 512 byte alignment with bs->buffer_alignment
to handle larger sector size devices c... - 04:39 pm Revision 5fe16888: Improve qemu-nbd performance by 4400 %
- This patch allows to reduce the boot time from an NBD server from 225 seconds to
5 seconds (time between the "boot cd... - 04:39 pm Revision bd28f835: qcow2: Avoid bounce buffers for AIO read requests
- qcow2 used to use bounce buffers for any AIO requests. This does not only imply
unnecessary copying, but also unbound... - 04:39 pm Revision 316a7af3: virtio-blk: propagate the required alignment
- Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com> - 04:39 pm Revision c01828fb: qcow2: Move sync out of write_refcount_block_entries
- Signed-off-by: Kevin Wolf <kwolf@redhat.com>
- 04:39 pm Revision b8a83a4f: cutils: qemu_iovec_copy and qemu_iovec_memset
- This adds two functions that work on QEMUIOVectors and will be used by the next
qcow2 patches.
Signed-off-by: Kevin ... - 04:39 pm Revision 9f8e668e: qcow2: Get rid of additional sync on COW
- We always have a sync for the refcount update when a new cluster is
allocated. If we move this past the COW, we can s... - 04:39 pm Revision 72aef731: use qemu_blockalign consistently
- Use qemu_blockalign for all allocations in the block layer. This allows
increasing the required alignment, which is ... - 04:39 pm Revision c2e2872b: nbd: correctly manage default port
- block/nbd.c: use default port number when none is specified
qemu-nbd.c: use IANA-assigned port number: 10809
Signed...
09/20/2010
- 09:22 pm Revision a287916c: Merge remote branch 'mst/for_anthony' into staging
- 09:15 pm Revision 57c6db2e: msix: clear not only INTA, but all INTx when MSI-X is enabled.
- clear not only INTA, but all INTx when MSI-X is enabled.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Sign... - 09:10 pm Revision 92ba5f51: pci: implement RW1C register framework.
- Implement RW1C register framework.
With this patch, it would be easy to implement
W1C(Write 1 to Clear) register by j... - 09:03 pm Revision 78aeb23e: e1000: Pad short frames to minimum size (60 bytes)
- The OpenIndiana (Solaris) e1000g driver drops frames that are too long
or too short. It expects to receive frames of...
09/19/2010
- 11:36 am Revision 952afb71: mingw: use ASLR, no-SEH and DEP if available
- If the linker supports the flags --dynamicbase, --no-seh,
or --nxcompat, use them.
Tested on Windows Vista: Process ... - 01:30 am Revision ebab1720: cris: Fix watchdog resets
- Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
09/18/2010
- 01:34 pm Revision 58aebb94: cris: Fix TLB exec bit protection
- Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
- 10:02 am Revision 0b65b9e1: Use gcc warning flag -Wnested-externs
- If the compiler supports the warning flag -Wnested-externs, use it.
Avoid the only warning by moving the declaration... - 10:01 am Revision 3ffd710e: Use gcc warning flag -Wempty-body
- If the compiler supports the warning flag -Wempty-body, use it.
Adjust the code to avoid the warnings.
Signed-off-b... - 10:01 am Revision a21493e0: Use a few more gcc warning flags
- If the compiler supports the following warning flags, use them:
-Wformat-security -Wformat-y2k -Winit-self -Wignored... - 08:53 am Revision 6e15cb5f: Use gcc warning flag -Wtype-limits
- If the compiler supports the warning flag -Wtype-limits, use it.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com> - 08:53 am Revision 1c7242da: MIPS: fix yield handling
- The parameter for yield should be handled as a signed integer
for the comparisons to have any effect.
This also avoi... - 08:53 am Revision 603ff776: pxa2xx: remove useless checks
- Remove checks which were made useless by r5849,
8da3ff180974732fc4272cb4433fef85c1822961.
This also avoids a warning... - 08:53 am Revision 7d147689: pxa2xx: fix SSSR TFN logic
- Fix SSSR TFN logic: TX FIFO is never filled, so it is always in
underrun condition if SSP is enabled.
This also avoi... - 08:53 am Revision d62d2863: PPC: Suppress gcc warnings with -Wtype-limits
- The hack added by c5b76b381081680633e2e0a91216507430409fb2 was not
enough to avoid warnings with gcc flag -Wtype-limi... - 08:53 am Revision 95ee3914: blkdebug: fix enum comparison
- The signedness of enum types depend on the compiler implementation.
Therefore the check for negative values may or ma... - 08:53 am Revision d0b3e4f5: linux-user: fix types in a comparison
- -1ul is unsigned long, which does not necessarily match abi_ulong
type.
Fix by using abi_long instead.
This also av... - 08:53 am Revision 093209cd: Check for errors during BIOS or kernel load
- Because of the use of unsigned types, possible errors during
BIOS or kernel load were ignored.
Fix by using a signed... - 08:53 am Revision bf1b0071: Introduce range.h
- Extract range functions from pci.h. These will be used by later patches
by non-PCI devices. Adjust current users.
Si... - 08:53 am Revision f562e716: linux-user: improve flatload error checking
- Because of the use of unsigned type, possible errors during
load were ignored.
Fix by using a signed type.
This als... - 08:53 am Revision 45416789: Use range_covers_byte
- Use range_covers_byte() instead of comparisons.
This avoids some warnings with GCC flag -Wtype-limits.
Signed-off-b... - 08:53 am Revision 38724253: linux-user: fix socklen_t comparisons
- On many systems, socklen_t is defined as unsigned. This means that
checks for negative values are not meaningful.
Fi...
09/17/2010
- 01:46 pm Revision dbf3c4b4: Make ARP replies at least 64 bytes long
- IEEE 802.3 standard requires Ethernet frames to be at least 64 bytes long.
If it is not the case, they will be consid... - 01:46 pm Revision 0d491754: Accept packets with TTL=1
- Packets with TTL=1 may be directed to local network (DHCP/DNS servers for example), so don't discard them
This is req...
09/16/2010
- 04:40 pm Revision abdfd950: cris: Avoid spurios hw_abort on recursive bus faults
- Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
09/15/2010
- 05:18 pm Revision 41557447: PPC: Redesign interrupt trigger path
- According to the Book3S spec, the interrupt context starts with an MSR
value that is rather simple. If we leave out t... - 05:18 pm Revision f844c817: PPC: Enable hint bits for lwarx/ldarx
- The lwarx and ldarx instructions have a bit to give some hint to the
CPU which is safe to ignore. We currently refuse... - 04:35 pm Revision 9a7c4878: serial: Update parameters after load
- This is the patch to update serial port parameters after guest is
already loaded.
Signed-off-by: Michal Novotny <min...
09/14/2010
- 05:02 pm Revision 6b37c87c: vhost: fix infinite loop on error path
- file.index is unsigned, hence 'while (--file.index >= 0)'
will loop > forever. Change to while (file.index-- > 0).
R... - 11:58 am Revision 46411f86: Remove wrong semicolon in macro definition
- Macros normally should not end with a semicolon,
otherwise their usage results in two statements
where only one state...
09/13/2010
- 10:03 pm Revision 0bb750ef: pci: improve signature of pci_register_bar().
- Make type uint8_t from int because PCIIORegion::type is uint8_t.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> - 10:03 pm Revision 5a9ff381: pci: sorting out type confusion in pci_register_bar().
- This patch sorts out invalid use of pcibus_t.
In pci_register_bar(), pcibus_t wmask is used. It should,
however, be... - 10:03 pm Revision 2bbb9c2f: pci: don't ignore invalid parameter for pci_register_bar().
- Abort when invalid value for region_num is passed to pci_register_bar.
That is caller's bug. Abort instead of silentl... - 10:03 pm Revision cf4c01fd: pci_ids.h: add vendor id of Texas Intesruments
- add vendor id of Texas Intesruments.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S... - 03:32 pm Revision b6601141: serial: Wrap debug prints around a DPRINTF macro
- Signed-off-by: Michal Novotny <minovotn@redhat.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
09/11/2010
- 07:38 pm Revision 73d74342: ESP: fix ESP DMA access when DMA is not enabled
- Sending ESP a command caused it to trigger DMA immediately
even if DMA was not enabled at the DMA controller.
Add a ... - 03:29 pm Revision 24e0e38b: powerpc: Avoid TLB related log spamming
- Invalid TLB entries are normal and should not spam the log.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com> - 01:43 pm Revision 2184d75b: trace: fix a regex portability problem
- The /bin/sh in Milax has problems with the regex:
Error: invalid trace backend
Please choose a supported trace backen...
09/10/2010
- 11:54 pm Revision dda85211: trace: fix a typo
- There is no qemu_valloc() but qemu_vmalloc().
Signed-off-by: Blue Swirl <blauwirbel@gmail.com> - 09:53 pm Revision 876f256b: HACKING: add rules for printf-like functions
- Add rules for printf-like functions, based on libvirt HACKING.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com> - 09:53 pm Revision d241f143: HACKING: add string management rules
- Add string management rules, somewhat like libvirt HACKING.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com> - 09:52 pm Revision 54b2cc50: HACKING: add memory management rules
- Add memory management rules, somewhat like libvirt HACKING.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com> - 09:47 pm Revision 84174436: HACKING: add C type rules
- Add C type rules, adapted from libvirt HACKING. Also include
a description of special QEMU scalar types.
Move typede... - 09:46 pm Revision 45fad878: HACKING: add preprocessor rules
- Add a new file, HACKING, in order to collect recurring
issues with submitted patches.
Start with preprocessor rules,... - 03:30 am Revision 9f810beb: vmware_vga: Replace the few tab-indents with spaces (clean-up).
- Use 4 spaces instead of 2, too.
- 03:23 am Revision 4dedc07f: vmware_vga: Add checks to deal with non-atomic fifo writes.
- Janne Huttunen noticed that the FIFO end pointer is updated by the
guest after writing each word to the FIFO, at leas... - 02:55 am Revision 6a8aabd3: hw/omap: Fix default setup for OMAP UART devices
- Character devices created by qemu_chr_open don't
allow duplicate device names, so naming all
UART devices "null" no l... - 12:22 am Revision bd3c9aa5: trace: Trace port IO
- Signed-off-by: Prerna Saxena <prerna@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> - 12:22 am Revision 6d519a5f: trace: Trace virtio-blk, multiwrite, and paio_submit
- This patch adds trace events that make it possible to observe
virtio-blk.
Signed-off-by: Stefan Hajnoczi <stefanha@l... - 12:22 am Revision 64979a4d: trace: Trace virtqueue operations
- This patch adds trace events for virtqueue operations including
adding/removing buffers, notifying the guest, and rec... - 12:22 am Revision cd245a19: trace: Trace qemu_malloc() and qemu_vmalloc()
- It is often useful to instrument memory management functions in order to
find leaks or performance problems. This pa... - 12:22 am Revision 62dd89de: trace: Trace entry point of balloon request handler
- Signed-off-by: Prerna Saxena <prerna@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> - 12:22 am Revision 9410b56c: trace: Specify trace file name
- Allow users to specify a file for trace-outputs at configuration.
Also, allow trace files to be annotated by <pid> so... - 12:22 am Revision 94a420b1: trace: Add trace-events file for declaring trace events
- This patch introduces the trace-events file where trace events can be
declared like so:
qemu_malloc(size_t size) "si... - 12:22 am Revision 7e24e92a: trace: Add LTTng Userspace Tracer backend
- This patch adds LTTng Userspace Tracer (UST) backend support. The UST
system requires no kernel support but libust a... - 12:22 am Revision 81a97d9d: trace: Add user documentation
- Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
- 12:22 am Revision ab6540d5: trace: Add trace file name command-line option
- This patch adds an optional command line switch '-trace' to specify the
filename to write traces to, when qemu starts... - 12:22 am Revision 22890ab5: trace: Support for dynamically enabling/disabling trace events
- This patch adds support for dynamically enabling/disabling of trace events.
This is done by internally maintaining ea... - 12:22 am Revision 26f7227b: trace: Add simple built-in tracing backend
- This patch adds a simple tracer which produces binary trace files. To
try out the simple backend:
$ ./configure --t... - 12:22 am Revision c5ceb523: trace: Add trace-file command to open/close/flush trace file
- This patch adds the trace-file command:
trace-file [on|off|flush]
Open, close, or flush the trace file. If no ... - 12:22 am Revision 1e2cf2bc: trace: Support disabled events in trace-events
- Sometimes it is useful to disable a trace event. Removing the event
from trace-events is not enough since source cod...
09/09/2010
- 11:05 pm Revision ef9d48da: microblaze: Add support for fcmp.un
- Signed-off-by: Edgar E. Iglesias <edgar.iglesias@petalogix.com>
- 10:37 pm Revision e403e433: elf: Calculate symbol size if needed
- Symbols with a size of 0 are unusable for the disassembler.
Example:
While running an arm linux kernel, no symbolic... - 10:13 pm Revision d7d9b528: Fix OpenBSD build warning
- Fix this warning:
CC savevm.o
/src/qemu/savevm.c: In function `do_savevm':
/src/qemu/savevm.c:1900: warning: pas... - 11:24 am Revision b76da7e3: microblaze: User-mode emulation of hw-excp signals
- Signed-off-by: Edgar E. Iglesias <edgar.iglesias@petalogix.com>
- 11:20 am Revision 97694c57: microblaze: Add basic FPU emulation
- Missing:
* fcmp.un insn
* Denormalized exceptions
* Exception model is not accurate
Signed-off-by: Edgar E. Iglesias... - 10:58 am Revision bdc0bf29: microblaze: Add definitions for FSR reg fields
- Signed-off-by: Edgar E. Iglesias <edgar.iglesias@petalogix.com>
- 01:09 am Revision 8b33d9ee: Revert "Make default invocation of block drivers safer (v3)"
- This reverts commit 79368c81bf8cf93864d7afc88b81b05d8f0a2c90.
Conflicts:
block.c
I haven't been able to come up w...
Also available in: Atom