Archipelago » qemu

/*

 * QEMU PPC CHRP/PMAC hardware System Emulator

 * 

 * Copyright (c) 2004 Fabrice Bellard

 * 

 * Permission is hereby granted, free of charge, to any person obtaining a copy

 * of this software and associated documentation files (the "Software"), to deal

 * in the Software without restriction, including without limitation the rights

 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell

 * copies of the Software, and to permit persons to whom the Software is

 * furnished to do so, subject to the following conditions:

 *

 * The above copyright notice and this permission notice shall be included in

 * all copies or substantial portions of the Software.

 *

 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR

 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,

 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL

 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER

 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,

 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN

 * THE SOFTWARE.

 */

#include "vl.h"

#define BIOS_FILENAME "ppc_rom.bin"

#define VGABIOS_FILENAME "video.x"

#define NVRAM_SIZE        0x2000

#define KERNEL_LOAD_ADDR 0x01000000

#define INITRD_LOAD_ADDR 0x01800000

/* MacIO devices (mapped inside the MacIO address space): CUDA, DBDMA,

   NVRAM */

static int dbdma_mem_index;

static int cuda_mem_index;

static int ide0_mem_index = -1;

static int ide1_mem_index = -1;

static int openpic_mem_index = -1;

static int heathrow_pic_mem_index = -1;

static int macio_nvram_mem_index = -1;

/* DBDMA: currently no op - should suffice right now */

static void dbdma_writeb (void *opaque, target_phys_addr_t addr, uint32_t value)

{

    printf("%s: 0x%08x <= 0x%08x\n", __func__, addr, value);

}

static void dbdma_writew (void *opaque, target_phys_addr_t addr, uint32_t value)

{

}

static void dbdma_writel (void *opaque, target_phys_addr_t addr, uint32_t value)

{

}

static uint32_t dbdma_readb (void *opaque, target_phys_addr_t addr)

{

    printf("%s: 0x%08x => 0x00000000\n", __func__, addr);

    return 0;

}

static uint32_t dbdma_readw (void *opaque, target_phys_addr_t addr)

{

    return 0;

}

static uint32_t dbdma_readl (void *opaque, target_phys_addr_t addr)

{

    return 0;

}

static CPUWriteMemoryFunc *dbdma_write[] = {

    &dbdma_writeb,

    &dbdma_writew,

    &dbdma_writel,

};

static CPUReadMemoryFunc *dbdma_read[] = {

    &dbdma_readb,

    &dbdma_readw,

    &dbdma_readl,

};

/* macio style NVRAM device */

typedef struct MacIONVRAMState {

    uint8_t data[0x2000];

} MacIONVRAMState;

static void macio_nvram_writeb (void *opaque, target_phys_addr_t addr, uint32_t value)

{

    MacIONVRAMState *s = opaque;

    addr = (addr >> 4) & 0x1fff;

    s->data[addr] = value;

    //    printf("macio_nvram_writeb %04x = %02x\n", addr, value);

}

static uint32_t macio_nvram_readb (void *opaque, target_phys_addr_t addr)

{

    MacIONVRAMState *s = opaque;

    uint32_t value;

    addr = (addr >> 4) & 0x1fff;

    value = s->data[addr];

    //    printf("macio_nvram_readb %04x = %02x\n", addr, value);

    return value;

}

static CPUWriteMemoryFunc *macio_nvram_write[] = {

    &macio_nvram_writeb,

    &macio_nvram_writeb,

    &macio_nvram_writeb,

};

static CPUReadMemoryFunc *macio_nvram_read[] = {

    &macio_nvram_readb,

    &macio_nvram_readb,

    &macio_nvram_readb,

};

static MacIONVRAMState *macio_nvram_init(void)

{

    MacIONVRAMState *s;

    s = qemu_mallocz(sizeof(MacIONVRAMState));

    if (!s)

        return NULL;

    macio_nvram_mem_index = cpu_register_io_memory(0, macio_nvram_read, 

                                                   macio_nvram_write, s);

    return s;

}

static void macio_map(PCIDevice *pci_dev, int region_num, 

                      uint32_t addr, uint32_t size, int type)

{

    if (heathrow_pic_mem_index >= 0) {

        cpu_register_physical_memory(addr + 0x00000, 0x1000, 

                                     heathrow_pic_mem_index);

    }

    cpu_register_physical_memory(addr + 0x08000, 0x1000, dbdma_mem_index);

    cpu_register_physical_memory(addr + 0x16000, 0x2000, cuda_mem_index);

    if (ide0_mem_index >= 0)

        cpu_register_physical_memory(addr + 0x1f000, 0x1000, ide0_mem_index);

    if (ide1_mem_index >= 0)

        cpu_register_physical_memory(addr + 0x20000, 0x1000, ide1_mem_index);

    if (openpic_mem_index >= 0) {

        cpu_register_physical_memory(addr + 0x40000, 0x40000, 

                                     openpic_mem_index);

    }

    if (macio_nvram_mem_index >= 0)

        cpu_register_physical_memory(addr + 0x60000, 0x20000, macio_nvram_mem_index);

}

static void macio_init(PCIBus *bus, int device_id)

{

    PCIDevice *d;

    d = pci_register_device(bus, "macio", sizeof(PCIDevice),

                            -1, NULL, NULL);

    /* Note: this code is strongly inspirated from the corresponding code

       in PearPC */

    d->config[0x00] = 0x6b; // vendor_id

    d->config[0x01] = 0x10;

    d->config[0x02] = device_id;

    d->config[0x03] = device_id >> 8;

    d->config[0x0a] = 0x00; // class_sub = pci2pci

    d->config[0x0b] = 0xff; // class_base = bridge

    d->config[0x0e] = 0x00; // header_type

    d->config[0x3d] = 0x01; // interrupt on pin 1

    dbdma_mem_index = cpu_register_io_memory(0, dbdma_read, dbdma_write, NULL);

    pci_register_io_region(d, 0, 0x80000, 

                           PCI_ADDRESS_SPACE_MEM, macio_map);

}

/* UniN device */

static void unin_writel (void *opaque, target_phys_addr_t addr, uint32_t value)

{

}

static uint32_t unin_readl (void *opaque, target_phys_addr_t addr)

{

    return 0;

}

static CPUWriteMemoryFunc *unin_write[] = {

    &unin_writel,

    &unin_writel,

    &unin_writel,

};

static CPUReadMemoryFunc *unin_read[] = {

    &unin_readl,

    &unin_readl,

    &unin_readl,

};

/* temporary frame buffer OSI calls for the video.x driver. The right

   solution is to modify the driver to use VGA PCI I/Os */

static int vga_osi_call(CPUState *env)

{

    static int vga_vbl_enabled;

    int linesize;

    //    printf("osi_call R5=%d\n", env->gpr[5]);

    /* same handler as PearPC, coming from the original MOL video

       driver. */

    switch(env->gpr[5]) {

    case 4:

        break;

    case 28: /* set_vmode */

        if (env->gpr[6] != 1 || env->gpr[7] != 0)

            env->gpr[3] = 1;

        else

            env->gpr[3] = 0;

        break;

    case 29: /* get_vmode_info */

        if (env->gpr[6] != 0) {

            if (env->gpr[6] != 1 || env->gpr[7] != 0) {

                env->gpr[3] = 1;

                break;

            }

        }

        env->gpr[3] = 0; 

        env->gpr[4] = (1 << 16) | 1; /* num_vmodes, cur_vmode */

        env->gpr[5] = (1 << 16) | 0; /* num_depths, cur_depth_mode */

        env->gpr[6] = (graphic_width << 16) | graphic_height; /* w, h */

        env->gpr[7] = 85 << 16; /* refresh rate */

        env->gpr[8] = (graphic_depth + 7) & ~7; /* depth (round to byte) */

        linesize = ((graphic_depth + 7) >> 3) * graphic_width;

        linesize = (linesize + 3) & ~3;

        env->gpr[9] = (linesize << 16) | 0; /* row_bytes, offset */

        break;

    case 31: /* set_video power */

        env->gpr[3] = 0;

        break;

    case 39: /* video_ctrl */

        if (env->gpr[6] == 0 || env->gpr[6] == 1)

            vga_vbl_enabled = env->gpr[6];

        env->gpr[3] = 0;

        break;

    case 47:

        break;

    case 59: /* set_color */

        /* R6 = index, R7 = RGB */

        env->gpr[3] = 0;

        break;

    case 64: /* get color */

        /* R6 = index */

        env->gpr[3] = 0; 

        break;

    case 116: /* set hwcursor */

        /* R6 = x, R7 = y, R8 = visible, R9 = data */

        break;

    default:

        fprintf(stderr, "unsupported OSI call R5=%08x\n", env->gpr[5]);

        break;

    }

    return 1; /* osi_call handled */

}

/* XXX: suppress that */

static void pic_irq_request(void *opaque, int level)

{

}

static uint8_t nvram_chksum(const uint8_t *buf, int n)

{

    int sum, i;

    sum = 0;

    for(i = 0; i < n; i++)

        sum += buf[i];

    return (sum & 0xff) + (sum >> 8);

}

/* set a free Mac OS NVRAM partition */

void pmac_format_nvram_partition(uint8_t *buf, int len)

{

    char partition_name[12] = "wwwwwwwwwwww";

    buf[0] = 0x7f; /* free partition magic */

    buf[1] = 0; /* checksum */

    buf[2] = len >> 8;

    buf[3] = len;

    memcpy(buf + 4, partition_name, 12);

    buf[1] = nvram_chksum(buf, 16);

}    

/* PowerPC CHRP hardware initialisation */

static void ppc_chrp_init(int ram_size, int vga_ram_size, int boot_device,

                          DisplayState *ds, const char **fd_filename, 

                          int snapshot,

                          const char *kernel_filename, 

                          const char *kernel_cmdline,

                          const char *initrd_filename,

                          int is_heathrow)

{

    CPUState *env;

    char buf[1024];

    SetIRQFunc *set_irq;

    void *pic;

    m48t59_t *nvram;

    int PPC_io_memory, unin_memory;

    int linux_boot, i;

    unsigned long bios_offset, vga_bios_offset;

    uint32_t kernel_base, kernel_size, initrd_base, initrd_size;

    ppc_def_t *def;

    PCIBus *pci_bus;

    const char *arch_name;

    int vga_bios_size, bios_size;

    linux_boot = (kernel_filename != NULL);

    /* init CPUs */

    env = cpu_init();

    register_savevm("cpu", 0, 3, cpu_save, cpu_load, env);

    /* Register CPU as a 74x/75x */

    /* XXX: CPU model (or PVR) should be provided on command line */

    //    ppc_find_by_name("750gx", &def); // Linux boot OK

    //    ppc_find_by_name("750fx", &def); // Linux boot OK

    /* Linux does not boot on 750cxe (and probably other 750cx based)

     * because it assumes it has 8 IBAT & DBAT pairs as it only have 4.

     */

    //    ppc_find_by_name("750cxe", &def);

    //    ppc_find_by_name("750p", &def);

    //    ppc_find_by_name("740p", &def);

    ppc_find_by_name("750", &def);

    //    ppc_find_by_name("740", &def);

    //    ppc_find_by_name("G3", &def);

    //    ppc_find_by_name("604r", &def);

    //    ppc_find_by_name("604e", &def);

    //    ppc_find_by_name("604", &def);

    if (def == NULL) {

        cpu_abort(env, "Unable to find PowerPC CPU definition\n");

    }

    cpu_ppc_register(env, def);

    /* Set time-base frequency to 100 Mhz */

    cpu_ppc_tb_init(env, 100UL * 1000UL * 1000UL);

    env->osi_call = vga_osi_call;

    /* allocate RAM */

    cpu_register_physical_memory(0, ram_size, IO_MEM_RAM);

    /* allocate and load BIOS */

    bios_offset = ram_size + vga_ram_size;

    snprintf(buf, sizeof(buf), "%s/%s", bios_dir, BIOS_FILENAME);

    bios_size = load_image(buf, phys_ram_base + bios_offset);

    if (bios_size < 0 || bios_size > BIOS_SIZE) {

        fprintf(stderr, "qemu: could not load PowerPC bios '%s'\n", buf);

        exit(1);

    }

    bios_size = (bios_size + 0xfff) & ~0xfff;

    cpu_register_physical_memory((uint32_t)(-bios_size), 

                                 bios_size, bios_offset | IO_MEM_ROM);

    /* allocate and load VGA BIOS */

    vga_bios_offset = bios_offset + bios_size;

    snprintf(buf, sizeof(buf), "%s/%s", bios_dir, VGABIOS_FILENAME);

    vga_bios_size = load_image(buf, phys_ram_base + vga_bios_offset + 8);

    if (vga_bios_size < 0) {

        /* if no bios is present, we can still work */

        fprintf(stderr, "qemu: warning: could not load VGA bios '%s'\n", buf);

        vga_bios_size = 0;

    } else {

        /* set a specific header (XXX: find real Apple format for NDRV

           drivers) */

        phys_ram_base[vga_bios_offset] = 'N';

        phys_ram_base[vga_bios_offset + 1] = 'D';

        phys_ram_base[vga_bios_offset + 2] = 'R';

        phys_ram_base[vga_bios_offset + 3] = 'V';

        cpu_to_be32w((uint32_t *)(phys_ram_base + vga_bios_offset + 4), 

                     vga_bios_size);

        vga_bios_size += 8;

    }

    vga_bios_size = (vga_bios_size + 0xfff) & ~0xfff;

    if (linux_boot) {

        kernel_base = KERNEL_LOAD_ADDR;

        /* now we can load the kernel */

        kernel_size = load_image(kernel_filename, phys_ram_base + kernel_base);

        if (kernel_size < 0) {

            fprintf(stderr, "qemu: could not load kernel '%s'\n", 

                    kernel_filename);

            exit(1);

        }

        /* load initrd */

        if (initrd_filename) {

            initrd_base = INITRD_LOAD_ADDR;

            initrd_size = load_image(initrd_filename,

                                     phys_ram_base + initrd_base);

            if (initrd_size < 0) {

                fprintf(stderr, "qemu: could not load initial ram disk '%s'\n", 

                        initrd_filename);

                exit(1);

            }

        } else {

            initrd_base = 0;

            initrd_size = 0;

        }

        boot_device = 'm';

    } else {

        kernel_base = 0;

        kernel_size = 0;

        initrd_base = 0;

        initrd_size = 0;

    }

    if (is_heathrow) {

        isa_mem_base = 0x80000000;

        pci_bus = pci_grackle_init(0xfec00000);

        /* Register 2 MB of ISA IO space */

        PPC_io_memory = cpu_register_io_memory(0, PPC_io_read, PPC_io_write, NULL);

        cpu_register_physical_memory(0xfe000000, 0x00200000, PPC_io_memory);

        /* init basic PC hardware */

        vga_initialize(pci_bus, ds, phys_ram_base + ram_size, 

                       ram_size, vga_ram_size,

                       vga_bios_offset, vga_bios_size);

        pic = heathrow_pic_init(&heathrow_pic_mem_index);

        set_irq = heathrow_pic_set_irq;

        pci_set_pic(pci_bus, set_irq, pic);

        /* XXX: suppress that */

        isa_pic = pic_init(pic_irq_request, NULL);

        /* XXX: use Mac Serial port */

        serial_init(&pic_set_irq_new, isa_pic, 0x3f8, 4, serial_hds[0]);

        for(i = 0; i < nb_nics; i++) {

            if (!nd_table[i].model)

                nd_table[i].model = "ne2k_pci";

            pci_nic_init(pci_bus, &nd_table[i]);

        }

        pci_cmd646_ide_init(pci_bus, &bs_table[0], 0);

        /* cuda also initialize ADB */

        cuda_mem_index = cuda_init(set_irq, pic, 0x12);

        adb_kbd_init(&adb_bus);

        adb_mouse_init(&adb_bus);

        {

            MacIONVRAMState *nvr;

            nvr = macio_nvram_init();

            pmac_format_nvram_partition(nvr->data, 0x2000);

        }

        macio_init(pci_bus, 0x0017);

        nvram = m48t59_init(8, 0xFFF04000, 0x0074, NVRAM_SIZE, 59);

        arch_name = "HEATHROW";

    } else {

        isa_mem_base = 0x80000000;

        pci_bus = pci_pmac_init();

        /* Register 8 MB of ISA IO space */

        PPC_io_memory = cpu_register_io_memory(0, PPC_io_read, PPC_io_write, NULL);

        cpu_register_physical_memory(0xF2000000, 0x00800000, PPC_io_memory);

        /* UniN init */

        unin_memory = cpu_register_io_memory(0, unin_read, unin_write, NULL);

        cpu_register_physical_memory(0xf8000000, 0x00001000, unin_memory);

        /* init basic PC hardware */

        vga_initialize(pci_bus, ds, phys_ram_base + ram_size,

                       ram_size, vga_ram_size,

                       vga_bios_offset, vga_bios_size);

        pic = openpic_init(NULL, &openpic_mem_index, 1, &env);

        set_irq = openpic_set_irq;

        pci_set_pic(pci_bus, set_irq, pic);

        /* XXX: suppress that */

        isa_pic = pic_init(pic_irq_request, NULL);

        /* XXX: use Mac Serial port */

        serial_init(&pic_set_irq_new, isa_pic, 0x3f8, 4, serial_hds[0]);

        for(i = 0; i < nb_nics; i++) {

            pci_ne2000_init(pci_bus, &nd_table[i]);

        }

#if 1

        ide0_mem_index = pmac_ide_init(&bs_table[0], set_irq, pic, 0x13);

        ide1_mem_index = pmac_ide_init(&bs_table[2], set_irq, pic, 0x14);

#else

        pci_cmd646_ide_init(pci_bus, &bs_table[0], 0);

#endif

        /* cuda also initialize ADB */

        cuda_mem_index = cuda_init(set_irq, pic, 0x19);

        adb_kbd_init(&adb_bus);

        adb_mouse_init(&adb_bus);

        macio_init(pci_bus, 0x0022);

        nvram = m48t59_init(8, 0xFFF04000, 0x0074, NVRAM_SIZE, 59);

        arch_name = "MAC99";

    }

    if (graphic_depth != 15 && graphic_depth != 32 && graphic_depth != 8)

        graphic_depth = 15;

    PPC_NVRAM_set_params(nvram, NVRAM_SIZE, arch_name, ram_size, boot_device,

                         kernel_base, kernel_size,

                         kernel_cmdline,

                         initrd_base, initrd_size,

                         /* XXX: need an option to load a NVRAM image */

                         0,

                         graphic_width, graphic_height, graphic_depth);

    /* No PCI init: the BIOS will do it */

    /* Special port to get debug messages from Open-Firmware */

    register_ioport_write(0x0F00, 4, 1, &PPC_debug_write, NULL);

}

static void ppc_core99_init(int ram_size, int vga_ram_size, int boot_device,

                            DisplayState *ds, const char **fd_filename, 

                            int snapshot,

                            const char *kernel_filename, 

                            const char *kernel_cmdline,

                            const char *initrd_filename)

{

    ppc_chrp_init(ram_size, vga_ram_size, boot_device,

                  ds, fd_filename, snapshot,

                  kernel_filename, kernel_cmdline,

                  initrd_filename, 0);

}

static void ppc_heathrow_init(int ram_size, int vga_ram_size, int boot_device,

                              DisplayState *ds, const char **fd_filename, 

                              int snapshot,

                              const char *kernel_filename, 

                              const char *kernel_cmdline,

                              const char *initrd_filename)

{

    ppc_chrp_init(ram_size, vga_ram_size, boot_device,

                  ds, fd_filename, snapshot,

                  kernel_filename, kernel_cmdline,

                  initrd_filename, 1);

}

QEMUMachine core99_machine = {

    "mac99",

    "Mac99 based PowerMAC",

    ppc_core99_init,

};

QEMUMachine heathrow_machine = {

    "g3bw",

    "Heathrow based PowerMAC",

    ppc_heathrow_init,

};