root / hw / pflash_cfi02.c @ 0d09e41a
History | View | Annotate | Download (23.9 kB)
| 1 |
/*
|
|---|---|
| 2 |
* CFI parallel flash with AMD command set emulation
|
| 3 |
*
|
| 4 |
* Copyright (c) 2005 Jocelyn Mayer
|
| 5 |
*
|
| 6 |
* This library is free software; you can redistribute it and/or
|
| 7 |
* modify it under the terms of the GNU Lesser General Public
|
| 8 |
* License as published by the Free Software Foundation; either
|
| 9 |
* version 2 of the License, or (at your option) any later version.
|
| 10 |
*
|
| 11 |
* This library is distributed in the hope that it will be useful,
|
| 12 |
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
| 13 |
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
| 14 |
* Lesser General Public License for more details.
|
| 15 |
*
|
| 16 |
* You should have received a copy of the GNU Lesser General Public
|
| 17 |
* License along with this library; if not, see <http://www.gnu.org/licenses/>.
|
| 18 |
*/
|
| 19 |
|
| 20 |
/*
|
| 21 |
* For now, this code can emulate flashes of 1, 2 or 4 bytes width.
|
| 22 |
* Supported commands/modes are:
|
| 23 |
* - flash read
|
| 24 |
* - flash write
|
| 25 |
* - flash ID read
|
| 26 |
* - sector erase
|
| 27 |
* - chip erase
|
| 28 |
* - unlock bypass command
|
| 29 |
* - CFI queries
|
| 30 |
*
|
| 31 |
* It does not support flash interleaving.
|
| 32 |
* It does not implement boot blocs with reduced size
|
| 33 |
* It does not implement software data protection as found in many real chips
|
| 34 |
* It does not implement erase suspend/resume commands
|
| 35 |
* It does not implement multiple sectors erase
|
| 36 |
*/
|
| 37 |
|
| 38 |
#include "hw/hw.h" |
| 39 |
#include "hw/block/flash.h" |
| 40 |
#include "qemu/timer.h" |
| 41 |
#include "block/block.h" |
| 42 |
#include "exec/address-spaces.h" |
| 43 |
#include "qemu/host-utils.h" |
| 44 |
#include "hw/sysbus.h" |
| 45 |
|
| 46 |
//#define PFLASH_DEBUG
|
| 47 |
#ifdef PFLASH_DEBUG
|
| 48 |
#define DPRINTF(fmt, ...) \
|
| 49 |
do { \
|
| 50 |
fprintf(stderr "PFLASH: " fmt , ## __VA_ARGS__); \ |
| 51 |
} while (0) |
| 52 |
#else
|
| 53 |
#define DPRINTF(fmt, ...) do { } while (0) |
| 54 |
#endif
|
| 55 |
|
| 56 |
#define PFLASH_LAZY_ROMD_THRESHOLD 42 |
| 57 |
|
| 58 |
struct pflash_t {
|
| 59 |
SysBusDevice busdev; |
| 60 |
BlockDriverState *bs; |
| 61 |
uint32_t sector_len; |
| 62 |
uint32_t nb_blocs; |
| 63 |
uint32_t chip_len; |
| 64 |
uint8_t mappings; |
| 65 |
uint8_t width; |
| 66 |
uint8_t be; |
| 67 |
int wcycle; /* if 0, the flash is read normally */ |
| 68 |
int bypass;
|
| 69 |
int ro;
|
| 70 |
uint8_t cmd; |
| 71 |
uint8_t status; |
| 72 |
/* FIXME: implement array device properties */
|
| 73 |
uint16_t ident0; |
| 74 |
uint16_t ident1; |
| 75 |
uint16_t ident2; |
| 76 |
uint16_t ident3; |
| 77 |
uint16_t unlock_addr0; |
| 78 |
uint16_t unlock_addr1; |
| 79 |
uint8_t cfi_len; |
| 80 |
uint8_t cfi_table[0x52];
|
| 81 |
QEMUTimer *timer; |
| 82 |
/* The device replicates the flash memory across its memory space. Emulate
|
| 83 |
* that by having a container (.mem) filled with an array of aliases
|
| 84 |
* (.mem_mappings) pointing to the flash memory (.orig_mem).
|
| 85 |
*/
|
| 86 |
MemoryRegion mem; |
| 87 |
MemoryRegion *mem_mappings; /* array; one per mapping */
|
| 88 |
MemoryRegion orig_mem; |
| 89 |
int rom_mode;
|
| 90 |
int read_counter; /* used for lazy switch-back to rom mode */ |
| 91 |
char *name;
|
| 92 |
void *storage;
|
| 93 |
}; |
| 94 |
|
| 95 |
/*
|
| 96 |
* Set up replicated mappings of the same region.
|
| 97 |
*/
|
| 98 |
static void pflash_setup_mappings(pflash_t *pfl) |
| 99 |
{
|
| 100 |
unsigned i;
|
| 101 |
hwaddr size = memory_region_size(&pfl->orig_mem); |
| 102 |
|
| 103 |
memory_region_init(&pfl->mem, "pflash", pfl->mappings * size);
|
| 104 |
pfl->mem_mappings = g_new(MemoryRegion, pfl->mappings); |
| 105 |
for (i = 0; i < pfl->mappings; ++i) { |
| 106 |
memory_region_init_alias(&pfl->mem_mappings[i], "pflash-alias",
|
| 107 |
&pfl->orig_mem, 0, size);
|
| 108 |
memory_region_add_subregion(&pfl->mem, i * size, &pfl->mem_mappings[i]); |
| 109 |
} |
| 110 |
} |
| 111 |
|
| 112 |
static void pflash_register_memory(pflash_t *pfl, int rom_mode) |
| 113 |
{
|
| 114 |
memory_region_rom_device_set_readable(&pfl->orig_mem, rom_mode); |
| 115 |
pfl->rom_mode = rom_mode; |
| 116 |
} |
| 117 |
|
| 118 |
static void pflash_timer (void *opaque) |
| 119 |
{
|
| 120 |
pflash_t *pfl = opaque; |
| 121 |
|
| 122 |
DPRINTF("%s: command %02x done\n", __func__, pfl->cmd);
|
| 123 |
/* Reset flash */
|
| 124 |
pfl->status ^= 0x80;
|
| 125 |
if (pfl->bypass) {
|
| 126 |
pfl->wcycle = 2;
|
| 127 |
} else {
|
| 128 |
pflash_register_memory(pfl, 1);
|
| 129 |
pfl->wcycle = 0;
|
| 130 |
} |
| 131 |
pfl->cmd = 0;
|
| 132 |
} |
| 133 |
|
| 134 |
static uint32_t pflash_read (pflash_t *pfl, hwaddr offset,
|
| 135 |
int width, int be) |
| 136 |
{
|
| 137 |
hwaddr boff; |
| 138 |
uint32_t ret; |
| 139 |
uint8_t *p; |
| 140 |
|
| 141 |
DPRINTF("%s: offset " TARGET_FMT_plx "\n", __func__, offset); |
| 142 |
ret = -1;
|
| 143 |
/* Lazy reset to ROMD mode after a certain amount of read accesses */
|
| 144 |
if (!pfl->rom_mode && pfl->wcycle == 0 && |
| 145 |
++pfl->read_counter > PFLASH_LAZY_ROMD_THRESHOLD) {
|
| 146 |
pflash_register_memory(pfl, 1);
|
| 147 |
} |
| 148 |
offset &= pfl->chip_len - 1;
|
| 149 |
boff = offset & 0xFF;
|
| 150 |
if (pfl->width == 2) |
| 151 |
boff = boff >> 1;
|
| 152 |
else if (pfl->width == 4) |
| 153 |
boff = boff >> 2;
|
| 154 |
switch (pfl->cmd) {
|
| 155 |
default:
|
| 156 |
/* This should never happen : reset state & treat it as a read*/
|
| 157 |
DPRINTF("%s: unknown command state: %x\n", __func__, pfl->cmd);
|
| 158 |
pfl->wcycle = 0;
|
| 159 |
pfl->cmd = 0;
|
| 160 |
/* fall through to the read code */
|
| 161 |
case 0x80: |
| 162 |
/* We accept reads during second unlock sequence... */
|
| 163 |
case 0x00: |
| 164 |
flash_read:
|
| 165 |
/* Flash area read */
|
| 166 |
p = pfl->storage; |
| 167 |
switch (width) {
|
| 168 |
case 1: |
| 169 |
ret = p[offset]; |
| 170 |
// DPRINTF("%s: data offset %08x %02x\n", __func__, offset, ret);
|
| 171 |
break;
|
| 172 |
case 2: |
| 173 |
if (be) {
|
| 174 |
ret = p[offset] << 8;
|
| 175 |
ret |= p[offset + 1];
|
| 176 |
} else {
|
| 177 |
ret = p[offset]; |
| 178 |
ret |= p[offset + 1] << 8; |
| 179 |
} |
| 180 |
// DPRINTF("%s: data offset %08x %04x\n", __func__, offset, ret);
|
| 181 |
break;
|
| 182 |
case 4: |
| 183 |
if (be) {
|
| 184 |
ret = p[offset] << 24;
|
| 185 |
ret |= p[offset + 1] << 16; |
| 186 |
ret |= p[offset + 2] << 8; |
| 187 |
ret |= p[offset + 3];
|
| 188 |
} else {
|
| 189 |
ret = p[offset]; |
| 190 |
ret |= p[offset + 1] << 8; |
| 191 |
ret |= p[offset + 2] << 16; |
| 192 |
ret |= p[offset + 3] << 24; |
| 193 |
} |
| 194 |
// DPRINTF("%s: data offset %08x %08x\n", __func__, offset, ret);
|
| 195 |
break;
|
| 196 |
} |
| 197 |
break;
|
| 198 |
case 0x90: |
| 199 |
/* flash ID read */
|
| 200 |
switch (boff) {
|
| 201 |
case 0x00: |
| 202 |
case 0x01: |
| 203 |
ret = boff & 0x01 ? pfl->ident1 : pfl->ident0;
|
| 204 |
break;
|
| 205 |
case 0x02: |
| 206 |
ret = 0x00; /* Pretend all sectors are unprotected */ |
| 207 |
break;
|
| 208 |
case 0x0E: |
| 209 |
case 0x0F: |
| 210 |
ret = boff & 0x01 ? pfl->ident3 : pfl->ident2;
|
| 211 |
if (ret == (uint8_t)-1) { |
| 212 |
goto flash_read;
|
| 213 |
} |
| 214 |
break;
|
| 215 |
default:
|
| 216 |
goto flash_read;
|
| 217 |
} |
| 218 |
DPRINTF("%s: ID " TARGET_FMT_plx " %x\n", __func__, boff, ret); |
| 219 |
break;
|
| 220 |
case 0xA0: |
| 221 |
case 0x10: |
| 222 |
case 0x30: |
| 223 |
/* Status register read */
|
| 224 |
ret = pfl->status; |
| 225 |
DPRINTF("%s: status %x\n", __func__, ret);
|
| 226 |
/* Toggle bit 6 */
|
| 227 |
pfl->status ^= 0x40;
|
| 228 |
break;
|
| 229 |
case 0x98: |
| 230 |
/* CFI query mode */
|
| 231 |
if (boff > pfl->cfi_len)
|
| 232 |
ret = 0;
|
| 233 |
else
|
| 234 |
ret = pfl->cfi_table[boff]; |
| 235 |
break;
|
| 236 |
} |
| 237 |
|
| 238 |
return ret;
|
| 239 |
} |
| 240 |
|
| 241 |
/* update flash content on disk */
|
| 242 |
static void pflash_update(pflash_t *pfl, int offset, |
| 243 |
int size)
|
| 244 |
{
|
| 245 |
int offset_end;
|
| 246 |
if (pfl->bs) {
|
| 247 |
offset_end = offset + size; |
| 248 |
/* round to sectors */
|
| 249 |
offset = offset >> 9;
|
| 250 |
offset_end = (offset_end + 511) >> 9; |
| 251 |
bdrv_write(pfl->bs, offset, pfl->storage + (offset << 9),
|
| 252 |
offset_end - offset); |
| 253 |
} |
| 254 |
} |
| 255 |
|
| 256 |
static void pflash_write (pflash_t *pfl, hwaddr offset, |
| 257 |
uint32_t value, int width, int be) |
| 258 |
{
|
| 259 |
hwaddr boff; |
| 260 |
uint8_t *p; |
| 261 |
uint8_t cmd; |
| 262 |
|
| 263 |
cmd = value; |
| 264 |
if (pfl->cmd != 0xA0 && cmd == 0xF0) { |
| 265 |
#if 0
|
| 266 |
DPRINTF("%s: flash reset asked (%02x %02x)\n",
|
| 267 |
__func__, pfl->cmd, cmd);
|
| 268 |
#endif
|
| 269 |
goto reset_flash;
|
| 270 |
} |
| 271 |
DPRINTF("%s: offset " TARGET_FMT_plx " %08x %d %d\n", __func__, |
| 272 |
offset, value, width, pfl->wcycle); |
| 273 |
offset &= pfl->chip_len - 1;
|
| 274 |
|
| 275 |
DPRINTF("%s: offset " TARGET_FMT_plx " %08x %d\n", __func__, |
| 276 |
offset, value, width); |
| 277 |
boff = offset & (pfl->sector_len - 1);
|
| 278 |
if (pfl->width == 2) |
| 279 |
boff = boff >> 1;
|
| 280 |
else if (pfl->width == 4) |
| 281 |
boff = boff >> 2;
|
| 282 |
switch (pfl->wcycle) {
|
| 283 |
case 0: |
| 284 |
/* Set the device in I/O access mode if required */
|
| 285 |
if (pfl->rom_mode)
|
| 286 |
pflash_register_memory(pfl, 0);
|
| 287 |
pfl->read_counter = 0;
|
| 288 |
/* We're in read mode */
|
| 289 |
check_unlock0:
|
| 290 |
if (boff == 0x55 && cmd == 0x98) { |
| 291 |
enter_CFI_mode:
|
| 292 |
/* Enter CFI query mode */
|
| 293 |
pfl->wcycle = 7;
|
| 294 |
pfl->cmd = 0x98;
|
| 295 |
return;
|
| 296 |
} |
| 297 |
if (boff != pfl->unlock_addr0 || cmd != 0xAA) { |
| 298 |
DPRINTF("%s: unlock0 failed " TARGET_FMT_plx " %02x %04x\n", |
| 299 |
__func__, boff, cmd, pfl->unlock_addr0); |
| 300 |
goto reset_flash;
|
| 301 |
} |
| 302 |
DPRINTF("%s: unlock sequence started\n", __func__);
|
| 303 |
break;
|
| 304 |
case 1: |
| 305 |
/* We started an unlock sequence */
|
| 306 |
check_unlock1:
|
| 307 |
if (boff != pfl->unlock_addr1 || cmd != 0x55) { |
| 308 |
DPRINTF("%s: unlock1 failed " TARGET_FMT_plx " %02x\n", __func__, |
| 309 |
boff, cmd); |
| 310 |
goto reset_flash;
|
| 311 |
} |
| 312 |
DPRINTF("%s: unlock sequence done\n", __func__);
|
| 313 |
break;
|
| 314 |
case 2: |
| 315 |
/* We finished an unlock sequence */
|
| 316 |
if (!pfl->bypass && boff != pfl->unlock_addr0) {
|
| 317 |
DPRINTF("%s: command failed " TARGET_FMT_plx " %02x\n", __func__, |
| 318 |
boff, cmd); |
| 319 |
goto reset_flash;
|
| 320 |
} |
| 321 |
switch (cmd) {
|
| 322 |
case 0x20: |
| 323 |
pfl->bypass = 1;
|
| 324 |
goto do_bypass;
|
| 325 |
case 0x80: |
| 326 |
case 0x90: |
| 327 |
case 0xA0: |
| 328 |
pfl->cmd = cmd; |
| 329 |
DPRINTF("%s: starting command %02x\n", __func__, cmd);
|
| 330 |
break;
|
| 331 |
default:
|
| 332 |
DPRINTF("%s: unknown command %02x\n", __func__, cmd);
|
| 333 |
goto reset_flash;
|
| 334 |
} |
| 335 |
break;
|
| 336 |
case 3: |
| 337 |
switch (pfl->cmd) {
|
| 338 |
case 0x80: |
| 339 |
/* We need another unlock sequence */
|
| 340 |
goto check_unlock0;
|
| 341 |
case 0xA0: |
| 342 |
DPRINTF("%s: write data offset " TARGET_FMT_plx " %08x %d\n", |
| 343 |
__func__, offset, value, width); |
| 344 |
p = pfl->storage; |
| 345 |
if (!pfl->ro) {
|
| 346 |
switch (width) {
|
| 347 |
case 1: |
| 348 |
p[offset] &= value; |
| 349 |
pflash_update(pfl, offset, 1);
|
| 350 |
break;
|
| 351 |
case 2: |
| 352 |
if (be) {
|
| 353 |
p[offset] &= value >> 8;
|
| 354 |
p[offset + 1] &= value;
|
| 355 |
} else {
|
| 356 |
p[offset] &= value; |
| 357 |
p[offset + 1] &= value >> 8; |
| 358 |
} |
| 359 |
pflash_update(pfl, offset, 2);
|
| 360 |
break;
|
| 361 |
case 4: |
| 362 |
if (be) {
|
| 363 |
p[offset] &= value >> 24;
|
| 364 |
p[offset + 1] &= value >> 16; |
| 365 |
p[offset + 2] &= value >> 8; |
| 366 |
p[offset + 3] &= value;
|
| 367 |
} else {
|
| 368 |
p[offset] &= value; |
| 369 |
p[offset + 1] &= value >> 8; |
| 370 |
p[offset + 2] &= value >> 16; |
| 371 |
p[offset + 3] &= value >> 24; |
| 372 |
} |
| 373 |
pflash_update(pfl, offset, 4);
|
| 374 |
break;
|
| 375 |
} |
| 376 |
} |
| 377 |
pfl->status = 0x00 | ~(value & 0x80); |
| 378 |
/* Let's pretend write is immediate */
|
| 379 |
if (pfl->bypass)
|
| 380 |
goto do_bypass;
|
| 381 |
goto reset_flash;
|
| 382 |
case 0x90: |
| 383 |
if (pfl->bypass && cmd == 0x00) { |
| 384 |
/* Unlock bypass reset */
|
| 385 |
goto reset_flash;
|
| 386 |
} |
| 387 |
/* We can enter CFI query mode from autoselect mode */
|
| 388 |
if (boff == 0x55 && cmd == 0x98) |
| 389 |
goto enter_CFI_mode;
|
| 390 |
/* No break here */
|
| 391 |
default:
|
| 392 |
DPRINTF("%s: invalid write for command %02x\n",
|
| 393 |
__func__, pfl->cmd); |
| 394 |
goto reset_flash;
|
| 395 |
} |
| 396 |
case 4: |
| 397 |
switch (pfl->cmd) {
|
| 398 |
case 0xA0: |
| 399 |
/* Ignore writes while flash data write is occurring */
|
| 400 |
/* As we suppose write is immediate, this should never happen */
|
| 401 |
return;
|
| 402 |
case 0x80: |
| 403 |
goto check_unlock1;
|
| 404 |
default:
|
| 405 |
/* Should never happen */
|
| 406 |
DPRINTF("%s: invalid command state %02x (wc 4)\n",
|
| 407 |
__func__, pfl->cmd); |
| 408 |
goto reset_flash;
|
| 409 |
} |
| 410 |
break;
|
| 411 |
case 5: |
| 412 |
switch (cmd) {
|
| 413 |
case 0x10: |
| 414 |
if (boff != pfl->unlock_addr0) {
|
| 415 |
DPRINTF("%s: chip erase: invalid address " TARGET_FMT_plx "\n", |
| 416 |
__func__, offset); |
| 417 |
goto reset_flash;
|
| 418 |
} |
| 419 |
/* Chip erase */
|
| 420 |
DPRINTF("%s: start chip erase\n", __func__);
|
| 421 |
if (!pfl->ro) {
|
| 422 |
memset(pfl->storage, 0xFF, pfl->chip_len);
|
| 423 |
pflash_update(pfl, 0, pfl->chip_len);
|
| 424 |
} |
| 425 |
pfl->status = 0x00;
|
| 426 |
/* Let's wait 5 seconds before chip erase is done */
|
| 427 |
qemu_mod_timer(pfl->timer, |
| 428 |
qemu_get_clock_ns(vm_clock) + (get_ticks_per_sec() * 5));
|
| 429 |
break;
|
| 430 |
case 0x30: |
| 431 |
/* Sector erase */
|
| 432 |
p = pfl->storage; |
| 433 |
offset &= ~(pfl->sector_len - 1);
|
| 434 |
DPRINTF("%s: start sector erase at " TARGET_FMT_plx "\n", __func__, |
| 435 |
offset); |
| 436 |
if (!pfl->ro) {
|
| 437 |
memset(p + offset, 0xFF, pfl->sector_len);
|
| 438 |
pflash_update(pfl, offset, pfl->sector_len); |
| 439 |
} |
| 440 |
pfl->status = 0x00;
|
| 441 |
/* Let's wait 1/2 second before sector erase is done */
|
| 442 |
qemu_mod_timer(pfl->timer, |
| 443 |
qemu_get_clock_ns(vm_clock) + (get_ticks_per_sec() / 2));
|
| 444 |
break;
|
| 445 |
default:
|
| 446 |
DPRINTF("%s: invalid command %02x (wc 5)\n", __func__, cmd);
|
| 447 |
goto reset_flash;
|
| 448 |
} |
| 449 |
pfl->cmd = cmd; |
| 450 |
break;
|
| 451 |
case 6: |
| 452 |
switch (pfl->cmd) {
|
| 453 |
case 0x10: |
| 454 |
/* Ignore writes during chip erase */
|
| 455 |
return;
|
| 456 |
case 0x30: |
| 457 |
/* Ignore writes during sector erase */
|
| 458 |
return;
|
| 459 |
default:
|
| 460 |
/* Should never happen */
|
| 461 |
DPRINTF("%s: invalid command state %02x (wc 6)\n",
|
| 462 |
__func__, pfl->cmd); |
| 463 |
goto reset_flash;
|
| 464 |
} |
| 465 |
break;
|
| 466 |
case 7: /* Special value for CFI queries */ |
| 467 |
DPRINTF("%s: invalid write in CFI query mode\n", __func__);
|
| 468 |
goto reset_flash;
|
| 469 |
default:
|
| 470 |
/* Should never happen */
|
| 471 |
DPRINTF("%s: invalid write state (wc 7)\n", __func__);
|
| 472 |
goto reset_flash;
|
| 473 |
} |
| 474 |
pfl->wcycle++; |
| 475 |
|
| 476 |
return;
|
| 477 |
|
| 478 |
/* Reset flash */
|
| 479 |
reset_flash:
|
| 480 |
pfl->bypass = 0;
|
| 481 |
pfl->wcycle = 0;
|
| 482 |
pfl->cmd = 0;
|
| 483 |
return;
|
| 484 |
|
| 485 |
do_bypass:
|
| 486 |
pfl->wcycle = 2;
|
| 487 |
pfl->cmd = 0;
|
| 488 |
} |
| 489 |
|
| 490 |
|
| 491 |
static uint32_t pflash_readb_be(void *opaque, hwaddr addr) |
| 492 |
{
|
| 493 |
return pflash_read(opaque, addr, 1, 1); |
| 494 |
} |
| 495 |
|
| 496 |
static uint32_t pflash_readb_le(void *opaque, hwaddr addr) |
| 497 |
{
|
| 498 |
return pflash_read(opaque, addr, 1, 0); |
| 499 |
} |
| 500 |
|
| 501 |
static uint32_t pflash_readw_be(void *opaque, hwaddr addr) |
| 502 |
{
|
| 503 |
pflash_t *pfl = opaque; |
| 504 |
|
| 505 |
return pflash_read(pfl, addr, 2, 1); |
| 506 |
} |
| 507 |
|
| 508 |
static uint32_t pflash_readw_le(void *opaque, hwaddr addr) |
| 509 |
{
|
| 510 |
pflash_t *pfl = opaque; |
| 511 |
|
| 512 |
return pflash_read(pfl, addr, 2, 0); |
| 513 |
} |
| 514 |
|
| 515 |
static uint32_t pflash_readl_be(void *opaque, hwaddr addr) |
| 516 |
{
|
| 517 |
pflash_t *pfl = opaque; |
| 518 |
|
| 519 |
return pflash_read(pfl, addr, 4, 1); |
| 520 |
} |
| 521 |
|
| 522 |
static uint32_t pflash_readl_le(void *opaque, hwaddr addr) |
| 523 |
{
|
| 524 |
pflash_t *pfl = opaque; |
| 525 |
|
| 526 |
return pflash_read(pfl, addr, 4, 0); |
| 527 |
} |
| 528 |
|
| 529 |
static void pflash_writeb_be(void *opaque, hwaddr addr, |
| 530 |
uint32_t value) |
| 531 |
{
|
| 532 |
pflash_write(opaque, addr, value, 1, 1); |
| 533 |
} |
| 534 |
|
| 535 |
static void pflash_writeb_le(void *opaque, hwaddr addr, |
| 536 |
uint32_t value) |
| 537 |
{
|
| 538 |
pflash_write(opaque, addr, value, 1, 0); |
| 539 |
} |
| 540 |
|
| 541 |
static void pflash_writew_be(void *opaque, hwaddr addr, |
| 542 |
uint32_t value) |
| 543 |
{
|
| 544 |
pflash_t *pfl = opaque; |
| 545 |
|
| 546 |
pflash_write(pfl, addr, value, 2, 1); |
| 547 |
} |
| 548 |
|
| 549 |
static void pflash_writew_le(void *opaque, hwaddr addr, |
| 550 |
uint32_t value) |
| 551 |
{
|
| 552 |
pflash_t *pfl = opaque; |
| 553 |
|
| 554 |
pflash_write(pfl, addr, value, 2, 0); |
| 555 |
} |
| 556 |
|
| 557 |
static void pflash_writel_be(void *opaque, hwaddr addr, |
| 558 |
uint32_t value) |
| 559 |
{
|
| 560 |
pflash_t *pfl = opaque; |
| 561 |
|
| 562 |
pflash_write(pfl, addr, value, 4, 1); |
| 563 |
} |
| 564 |
|
| 565 |
static void pflash_writel_le(void *opaque, hwaddr addr, |
| 566 |
uint32_t value) |
| 567 |
{
|
| 568 |
pflash_t *pfl = opaque; |
| 569 |
|
| 570 |
pflash_write(pfl, addr, value, 4, 0); |
| 571 |
} |
| 572 |
|
| 573 |
static const MemoryRegionOps pflash_cfi02_ops_be = { |
| 574 |
.old_mmio = {
|
| 575 |
.read = { pflash_readb_be, pflash_readw_be, pflash_readl_be, },
|
| 576 |
.write = { pflash_writeb_be, pflash_writew_be, pflash_writel_be, },
|
| 577 |
}, |
| 578 |
.endianness = DEVICE_NATIVE_ENDIAN, |
| 579 |
}; |
| 580 |
|
| 581 |
static const MemoryRegionOps pflash_cfi02_ops_le = { |
| 582 |
.old_mmio = {
|
| 583 |
.read = { pflash_readb_le, pflash_readw_le, pflash_readl_le, },
|
| 584 |
.write = { pflash_writeb_le, pflash_writew_le, pflash_writel_le, },
|
| 585 |
}, |
| 586 |
.endianness = DEVICE_NATIVE_ENDIAN, |
| 587 |
}; |
| 588 |
|
| 589 |
static int pflash_cfi02_init(SysBusDevice *dev) |
| 590 |
{
|
| 591 |
pflash_t *pfl = FROM_SYSBUS(typeof(*pfl), dev); |
| 592 |
uint32_t chip_len; |
| 593 |
int ret;
|
| 594 |
|
| 595 |
chip_len = pfl->sector_len * pfl->nb_blocs; |
| 596 |
/* XXX: to be fixed */
|
| 597 |
#if 0
|
| 598 |
if (total_len != (8 * 1024 * 1024) && total_len != (16 * 1024 * 1024) &&
|
| 599 |
total_len != (32 * 1024 * 1024) && total_len != (64 * 1024 * 1024))
|
| 600 |
return NULL;
|
| 601 |
#endif
|
| 602 |
|
| 603 |
memory_region_init_rom_device(&pfl->orig_mem, pfl->be ? |
| 604 |
&pflash_cfi02_ops_be : &pflash_cfi02_ops_le, |
| 605 |
pfl, pfl->name, chip_len); |
| 606 |
vmstate_register_ram(&pfl->orig_mem, DEVICE(pfl)); |
| 607 |
pfl->storage = memory_region_get_ram_ptr(&pfl->orig_mem); |
| 608 |
pfl->chip_len = chip_len; |
| 609 |
if (pfl->bs) {
|
| 610 |
/* read the initial flash content */
|
| 611 |
ret = bdrv_read(pfl->bs, 0, pfl->storage, chip_len >> 9); |
| 612 |
if (ret < 0) { |
| 613 |
g_free(pfl); |
| 614 |
return 1; |
| 615 |
} |
| 616 |
} |
| 617 |
|
| 618 |
pflash_setup_mappings(pfl); |
| 619 |
pfl->rom_mode = 1;
|
| 620 |
sysbus_init_mmio(dev, &pfl->mem); |
| 621 |
|
| 622 |
if (pfl->bs) {
|
| 623 |
pfl->ro = bdrv_is_read_only(pfl->bs); |
| 624 |
} else {
|
| 625 |
pfl->ro = 0;
|
| 626 |
} |
| 627 |
|
| 628 |
pfl->timer = qemu_new_timer_ns(vm_clock, pflash_timer, pfl); |
| 629 |
pfl->wcycle = 0;
|
| 630 |
pfl->cmd = 0;
|
| 631 |
pfl->status = 0;
|
| 632 |
/* Hardcoded CFI table (mostly from SG29 Spansion flash) */
|
| 633 |
pfl->cfi_len = 0x52;
|
| 634 |
/* Standard "QRY" string */
|
| 635 |
pfl->cfi_table[0x10] = 'Q'; |
| 636 |
pfl->cfi_table[0x11] = 'R'; |
| 637 |
pfl->cfi_table[0x12] = 'Y'; |
| 638 |
/* Command set (AMD/Fujitsu) */
|
| 639 |
pfl->cfi_table[0x13] = 0x02; |
| 640 |
pfl->cfi_table[0x14] = 0x00; |
| 641 |
/* Primary extended table address */
|
| 642 |
pfl->cfi_table[0x15] = 0x31; |
| 643 |
pfl->cfi_table[0x16] = 0x00; |
| 644 |
/* Alternate command set (none) */
|
| 645 |
pfl->cfi_table[0x17] = 0x00; |
| 646 |
pfl->cfi_table[0x18] = 0x00; |
| 647 |
/* Alternate extended table (none) */
|
| 648 |
pfl->cfi_table[0x19] = 0x00; |
| 649 |
pfl->cfi_table[0x1A] = 0x00; |
| 650 |
/* Vcc min */
|
| 651 |
pfl->cfi_table[0x1B] = 0x27; |
| 652 |
/* Vcc max */
|
| 653 |
pfl->cfi_table[0x1C] = 0x36; |
| 654 |
/* Vpp min (no Vpp pin) */
|
| 655 |
pfl->cfi_table[0x1D] = 0x00; |
| 656 |
/* Vpp max (no Vpp pin) */
|
| 657 |
pfl->cfi_table[0x1E] = 0x00; |
| 658 |
/* Reserved */
|
| 659 |
pfl->cfi_table[0x1F] = 0x07; |
| 660 |
/* Timeout for min size buffer write (NA) */
|
| 661 |
pfl->cfi_table[0x20] = 0x00; |
| 662 |
/* Typical timeout for block erase (512 ms) */
|
| 663 |
pfl->cfi_table[0x21] = 0x09; |
| 664 |
/* Typical timeout for full chip erase (4096 ms) */
|
| 665 |
pfl->cfi_table[0x22] = 0x0C; |
| 666 |
/* Reserved */
|
| 667 |
pfl->cfi_table[0x23] = 0x01; |
| 668 |
/* Max timeout for buffer write (NA) */
|
| 669 |
pfl->cfi_table[0x24] = 0x00; |
| 670 |
/* Max timeout for block erase */
|
| 671 |
pfl->cfi_table[0x25] = 0x0A; |
| 672 |
/* Max timeout for chip erase */
|
| 673 |
pfl->cfi_table[0x26] = 0x0D; |
| 674 |
/* Device size */
|
| 675 |
pfl->cfi_table[0x27] = ctz32(chip_len);
|
| 676 |
/* Flash device interface (8 & 16 bits) */
|
| 677 |
pfl->cfi_table[0x28] = 0x02; |
| 678 |
pfl->cfi_table[0x29] = 0x00; |
| 679 |
/* Max number of bytes in multi-bytes write */
|
| 680 |
/* XXX: disable buffered write as it's not supported */
|
| 681 |
// pfl->cfi_table[0x2A] = 0x05;
|
| 682 |
pfl->cfi_table[0x2A] = 0x00; |
| 683 |
pfl->cfi_table[0x2B] = 0x00; |
| 684 |
/* Number of erase block regions (uniform) */
|
| 685 |
pfl->cfi_table[0x2C] = 0x01; |
| 686 |
/* Erase block region 1 */
|
| 687 |
pfl->cfi_table[0x2D] = pfl->nb_blocs - 1; |
| 688 |
pfl->cfi_table[0x2E] = (pfl->nb_blocs - 1) >> 8; |
| 689 |
pfl->cfi_table[0x2F] = pfl->sector_len >> 8; |
| 690 |
pfl->cfi_table[0x30] = pfl->sector_len >> 16; |
| 691 |
|
| 692 |
/* Extended */
|
| 693 |
pfl->cfi_table[0x31] = 'P'; |
| 694 |
pfl->cfi_table[0x32] = 'R'; |
| 695 |
pfl->cfi_table[0x33] = 'I'; |
| 696 |
|
| 697 |
pfl->cfi_table[0x34] = '1'; |
| 698 |
pfl->cfi_table[0x35] = '0'; |
| 699 |
|
| 700 |
pfl->cfi_table[0x36] = 0x00; |
| 701 |
pfl->cfi_table[0x37] = 0x00; |
| 702 |
pfl->cfi_table[0x38] = 0x00; |
| 703 |
pfl->cfi_table[0x39] = 0x00; |
| 704 |
|
| 705 |
pfl->cfi_table[0x3a] = 0x00; |
| 706 |
|
| 707 |
pfl->cfi_table[0x3b] = 0x00; |
| 708 |
pfl->cfi_table[0x3c] = 0x00; |
| 709 |
|
| 710 |
return 0; |
| 711 |
} |
| 712 |
|
| 713 |
static Property pflash_cfi02_properties[] = {
|
| 714 |
DEFINE_PROP_DRIVE("drive", struct pflash_t, bs), |
| 715 |
DEFINE_PROP_UINT32("num-blocks", struct pflash_t, nb_blocs, 0), |
| 716 |
DEFINE_PROP_UINT32("sector-length", struct pflash_t, sector_len, 0), |
| 717 |
DEFINE_PROP_UINT8("width", struct pflash_t, width, 0), |
| 718 |
DEFINE_PROP_UINT8("mappings", struct pflash_t, mappings, 0), |
| 719 |
DEFINE_PROP_UINT8("big-endian", struct pflash_t, be, 0), |
| 720 |
DEFINE_PROP_UINT16("id0", struct pflash_t, ident0, 0), |
| 721 |
DEFINE_PROP_UINT16("id1", struct pflash_t, ident1, 0), |
| 722 |
DEFINE_PROP_UINT16("id2", struct pflash_t, ident2, 0), |
| 723 |
DEFINE_PROP_UINT16("id3", struct pflash_t, ident3, 0), |
| 724 |
DEFINE_PROP_UINT16("unlock-addr0", struct pflash_t, unlock_addr0, 0), |
| 725 |
DEFINE_PROP_UINT16("unlock-addr1", struct pflash_t, unlock_addr1, 0), |
| 726 |
DEFINE_PROP_STRING("name", struct pflash_t, name), |
| 727 |
DEFINE_PROP_END_OF_LIST(), |
| 728 |
}; |
| 729 |
|
| 730 |
static void pflash_cfi02_class_init(ObjectClass *klass, void *data) |
| 731 |
{
|
| 732 |
DeviceClass *dc = DEVICE_CLASS(klass); |
| 733 |
SysBusDeviceClass *k = SYS_BUS_DEVICE_CLASS(klass); |
| 734 |
|
| 735 |
k->init = pflash_cfi02_init; |
| 736 |
dc->props = pflash_cfi02_properties; |
| 737 |
} |
| 738 |
|
| 739 |
static const TypeInfo pflash_cfi02_info = { |
| 740 |
.name = "cfi.pflash02",
|
| 741 |
.parent = TYPE_SYS_BUS_DEVICE, |
| 742 |
.instance_size = sizeof(struct pflash_t), |
| 743 |
.class_init = pflash_cfi02_class_init, |
| 744 |
}; |
| 745 |
|
| 746 |
static void pflash_cfi02_register_types(void) |
| 747 |
{
|
| 748 |
type_register_static(&pflash_cfi02_info); |
| 749 |
} |
| 750 |
|
| 751 |
type_init(pflash_cfi02_register_types) |
| 752 |
|
| 753 |
pflash_t *pflash_cfi02_register(hwaddr base, |
| 754 |
DeviceState *qdev, const char *name, |
| 755 |
hwaddr size, |
| 756 |
BlockDriverState *bs, uint32_t sector_len, |
| 757 |
int nb_blocs, int nb_mappings, int width, |
| 758 |
uint16_t id0, uint16_t id1, |
| 759 |
uint16_t id2, uint16_t id3, |
| 760 |
uint16_t unlock_addr0, uint16_t unlock_addr1, |
| 761 |
int be)
|
| 762 |
{
|
| 763 |
DeviceState *dev = qdev_create(NULL, "cfi.pflash02"); |
| 764 |
SysBusDevice *busdev = SYS_BUS_DEVICE(dev); |
| 765 |
pflash_t *pfl = (pflash_t *)object_dynamic_cast(OBJECT(dev), |
| 766 |
"cfi.pflash02");
|
| 767 |
|
| 768 |
if (bs && qdev_prop_set_drive(dev, "drive", bs)) { |
| 769 |
abort(); |
| 770 |
} |
| 771 |
qdev_prop_set_uint32(dev, "num-blocks", nb_blocs);
|
| 772 |
qdev_prop_set_uint32(dev, "sector-length", sector_len);
|
| 773 |
qdev_prop_set_uint8(dev, "width", width);
|
| 774 |
qdev_prop_set_uint8(dev, "mappings", nb_mappings);
|
| 775 |
qdev_prop_set_uint8(dev, "big-endian", !!be);
|
| 776 |
qdev_prop_set_uint16(dev, "id0", id0);
|
| 777 |
qdev_prop_set_uint16(dev, "id1", id1);
|
| 778 |
qdev_prop_set_uint16(dev, "id2", id2);
|
| 779 |
qdev_prop_set_uint16(dev, "id3", id3);
|
| 780 |
qdev_prop_set_uint16(dev, "unlock-addr0", unlock_addr0);
|
| 781 |
qdev_prop_set_uint16(dev, "unlock-addr1", unlock_addr1);
|
| 782 |
qdev_prop_set_string(dev, "name", name);
|
| 783 |
qdev_init_nofail(dev); |
| 784 |
|
| 785 |
sysbus_mmio_map(busdev, 0, base);
|
| 786 |
return pfl;
|
| 787 |
} |