Archipelago » qemu

/*

 * QEMU Sparc SLAVIO interrupt controller emulation

 *

 * Copyright (c) 2003-2005 Fabrice Bellard

 *

 * Permission is hereby granted, free of charge, to any person obtaining a copy

 * of this software and associated documentation files (the "Software"), to deal

 * in the Software without restriction, including without limitation the rights

 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell

 * copies of the Software, and to permit persons to whom the Software is

 * furnished to do so, subject to the following conditions:

 *

 * The above copyright notice and this permission notice shall be included in

 * all copies or substantial portions of the Software.

 *

 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR

 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,

 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL

 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER

 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,

 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN

 * THE SOFTWARE.

 */

#include "sun4m.h"

#include "monitor.h"

#include "sysbus.h"

//#define DEBUG_IRQ_COUNT

//#define DEBUG_IRQ

#ifdef DEBUG_IRQ

#define DPRINTF(fmt, ...)                                       \

    do { printf("IRQ: " fmt , ## __VA_ARGS__); } while (0)

#else

#define DPRINTF(fmt, ...)

#endif

/*

 * Registers of interrupt controller in sun4m.

 *

 * This is the interrupt controller part of chip STP2001 (Slave I/O), also

 * produced as NCR89C105. See

 * http://www.ibiblio.org/pub/historic-linux/early-ports/Sparc/NCR/NCR89C105.txt

 *

 * There is a system master controller and one for each cpu.

 *

 */

#define MAX_CPUS 16

#define MAX_PILS 16

struct SLAVIO_INTCTLState;

typedef struct SLAVIO_CPUINTCTLState {

    uint32_t intreg_pending;

    struct SLAVIO_INTCTLState *master;

    uint32_t cpu;

} SLAVIO_CPUINTCTLState;

typedef struct SLAVIO_INTCTLState {

    SysBusDevice busdev;

    uint32_t intregm_pending;

    uint32_t intregm_disabled;

    uint32_t target_cpu;

#ifdef DEBUG_IRQ_COUNT

    uint64_t irq_count[32];

#endif

    qemu_irq cpu_irqs[MAX_CPUS][MAX_PILS];

    const uint32_t *intbit_to_level;

    uint32_t cputimer_lbit, cputimer_mbit;

    uint32_t cputimer_bit;

    uint32_t pil_out[MAX_CPUS];

    SLAVIO_CPUINTCTLState slaves[MAX_CPUS];

} SLAVIO_INTCTLState;

#define INTCTL_MAXADDR 0xf

#define INTCTL_SIZE (INTCTL_MAXADDR + 1)

#define INTCTLM_SIZE 0x14

#define MASTER_IRQ_MASK ~0x0fa2007f

#define MASTER_DISABLE 0x80000000

#define CPU_SOFTIRQ_MASK 0xfffe0000

#define CPU_IRQ_INT15_IN 0x0004000

#define CPU_IRQ_INT15_MASK 0x80000000

static void slavio_check_interrupts(SLAVIO_INTCTLState *s, int set_irqs);

// per-cpu interrupt controller

static uint32_t slavio_intctl_mem_readl(void *opaque, target_phys_addr_t addr)

{

    SLAVIO_CPUINTCTLState *s = opaque;

    uint32_t saddr, ret;

    saddr = addr >> 2;

    switch (saddr) {

    case 0:

        ret = s->intreg_pending;

        break;

    default:

        ret = 0;

        break;

    }

    DPRINTF("read cpu %d reg 0x" TARGET_FMT_plx " = %x\n", s->cpu, addr, ret);

    return ret;

}

static void slavio_intctl_mem_writel(void *opaque, target_phys_addr_t addr,

                                     uint32_t val)

{

    SLAVIO_CPUINTCTLState *s = opaque;

    uint32_t saddr;

    saddr = addr >> 2;

    DPRINTF("write cpu %d reg 0x" TARGET_FMT_plx " = %x\n", s->cpu, addr, val);

    switch (saddr) {

    case 1: // clear pending softints

        if (val & CPU_IRQ_INT15_IN)

            val |= CPU_IRQ_INT15_MASK;

        val &= CPU_SOFTIRQ_MASK;

        s->intreg_pending &= ~val;

        slavio_check_interrupts(s->master, 1);

        DPRINTF("Cleared cpu %d irq mask %x, curmask %x\n", s->cpu, val,

                s->intreg_pending);

        break;

    case 2: // set softint

        val &= CPU_SOFTIRQ_MASK;

        s->intreg_pending |= val;

        slavio_check_interrupts(s->master, 1);

        DPRINTF("Set cpu %d irq mask %x, curmask %x\n", s->cpu, val,

                s->intreg_pending);

        break;

    default:

        break;

    }

}

static CPUReadMemoryFunc *slavio_intctl_mem_read[3] = {

    NULL,

    NULL,

    slavio_intctl_mem_readl,

};

static CPUWriteMemoryFunc *slavio_intctl_mem_write[3] = {

    NULL,

    NULL,

    slavio_intctl_mem_writel,

};

// master system interrupt controller

static uint32_t slavio_intctlm_mem_readl(void *opaque, target_phys_addr_t addr)

{

    SLAVIO_INTCTLState *s = opaque;

    uint32_t saddr, ret;

    saddr = addr >> 2;

    switch (saddr) {

    case 0:

        ret = s->intregm_pending & ~MASTER_DISABLE;

        break;

    case 1:

        ret = s->intregm_disabled & MASTER_IRQ_MASK;

        break;

    case 4:

        ret = s->target_cpu;

        break;

    default:

        ret = 0;

        break;

    }

    DPRINTF("read system reg 0x" TARGET_FMT_plx " = %x\n", addr, ret);

    return ret;

}

static void slavio_intctlm_mem_writel(void *opaque, target_phys_addr_t addr,

                                      uint32_t val)

{

    SLAVIO_INTCTLState *s = opaque;

    uint32_t saddr;

    saddr = addr >> 2;

    DPRINTF("write system reg 0x" TARGET_FMT_plx " = %x\n", addr, val);

    switch (saddr) {

    case 2: // clear (enable)

        // Force clear unused bits

        val &= MASTER_IRQ_MASK;

        s->intregm_disabled &= ~val;

        DPRINTF("Enabled master irq mask %x, curmask %x\n", val,

                s->intregm_disabled);

        slavio_check_interrupts(s, 1);

        break;

    case 3: // set (disable, clear pending)

        // Force clear unused bits

        val &= MASTER_IRQ_MASK;

        s->intregm_disabled |= val;

        s->intregm_pending &= ~val;

        slavio_check_interrupts(s, 1);

        DPRINTF("Disabled master irq mask %x, curmask %x\n", val,

                s->intregm_disabled);

        break;

    case 4:

        s->target_cpu = val & (MAX_CPUS - 1);

        slavio_check_interrupts(s, 1);

        DPRINTF("Set master irq cpu %d\n", s->target_cpu);

        break;

    default:

        break;

    }

}

static CPUReadMemoryFunc *slavio_intctlm_mem_read[3] = {

    NULL,

    NULL,

    slavio_intctlm_mem_readl,

};

static CPUWriteMemoryFunc *slavio_intctlm_mem_write[3] = {

    NULL,

    NULL,

    slavio_intctlm_mem_writel,

};

void slavio_pic_info(Monitor *mon, void *opaque)

{

    SLAVIO_INTCTLState *s = opaque;

    int i;

    for (i = 0; i < MAX_CPUS; i++) {

        monitor_printf(mon, "per-cpu %d: pending 0x%08x\n", i,

                       s->slaves[i].intreg_pending);

    }

    monitor_printf(mon, "master: pending 0x%08x, disabled 0x%08x\n",

                   s->intregm_pending, s->intregm_disabled);

}

void slavio_irq_info(Monitor *mon, void *opaque)

{

#ifndef DEBUG_IRQ_COUNT

    monitor_printf(mon, "irq statistic code not compiled.\n");

#else

    SLAVIO_INTCTLState *s = opaque;

    int i;

    int64_t count;

    monitor_printf(mon, "IRQ statistics:\n");

    for (i = 0; i < 32; i++) {

        count = s->irq_count[i];

        if (count > 0)

            monitor_printf(mon, "%2d: %" PRId64 "\n", i, count);

    }

#endif

}

static void slavio_check_interrupts(SLAVIO_INTCTLState *s, int set_irqs)

{

    uint32_t pending = s->intregm_pending, pil_pending;

    unsigned int i, j;

    pending &= ~s->intregm_disabled;

    DPRINTF("pending %x disabled %x\n", pending, s->intregm_disabled);

    for (i = 0; i < MAX_CPUS; i++) {

        pil_pending = 0;

        if (pending && !(s->intregm_disabled & MASTER_DISABLE) &&

            (i == s->target_cpu)) {

            for (j = 0; j < 32; j++) {

                if (pending & (1 << j))

                    pil_pending |= 1 << s->intbit_to_level[j];

            }

        }

        pil_pending |= (s->slaves[i].intreg_pending & CPU_SOFTIRQ_MASK) >> 16;

        if (set_irqs) {

            for (j = 0; j < MAX_PILS; j++) {

                if (pil_pending & (1 << j)) {

                    if (!(s->pil_out[i] & (1 << j))) {

                        qemu_irq_raise(s->cpu_irqs[i][j]);

                    }

                } else {

                    if (s->pil_out[i] & (1 << j)) {

                        qemu_irq_lower(s->cpu_irqs[i][j]);

                    }

                }

            }

        }

        s->pil_out[i] = pil_pending;

    }

}

/*

 * "irq" here is the bit number in the system interrupt register to

 * separate serial and keyboard interrupts sharing a level.

 */

static void slavio_set_irq(void *opaque, int irq, int level)

{

    SLAVIO_INTCTLState *s = opaque;

    uint32_t mask = 1 << irq;

    uint32_t pil = s->intbit_to_level[irq];

    DPRINTF("Set cpu %d irq %d -> pil %d level %d\n", s->target_cpu, irq, pil,

            level);

    if (pil > 0) {

        if (level) {

#ifdef DEBUG_IRQ_COUNT

            s->irq_count[pil]++;

#endif

            s->intregm_pending |= mask;

            s->slaves[s->target_cpu].intreg_pending |= 1 << pil;

        } else {

            s->intregm_pending &= ~mask;

            s->slaves[s->target_cpu].intreg_pending &= ~(1 << pil);

        }

        slavio_check_interrupts(s, 1);

    }

}

static void slavio_set_timer_irq_cpu(void *opaque, int cpu, int level)

{

    SLAVIO_INTCTLState *s = opaque;

    DPRINTF("Set cpu %d local timer level %d\n", cpu, level);

    if (level) {

        s->intregm_pending |= s->cputimer_mbit;

        s->slaves[cpu].intreg_pending |= s->cputimer_lbit;

    } else {

        s->intregm_pending &= ~s->cputimer_mbit;

        s->slaves[cpu].intreg_pending &= ~s->cputimer_lbit;

    }

    slavio_check_interrupts(s, 1);

}

static void slavio_set_irq_all(void *opaque, int irq, int level)

{

    if (irq < 32) {

        slavio_set_irq(opaque, irq, level);

    } else {

        slavio_set_timer_irq_cpu(opaque, irq - 32, level);

    }

}

static void slavio_intctl_save(QEMUFile *f, void *opaque)

{

    SLAVIO_INTCTLState *s = opaque;

    int i;

    for (i = 0; i < MAX_CPUS; i++) {

        qemu_put_be32s(f, &s->slaves[i].intreg_pending);

    }

    qemu_put_be32s(f, &s->intregm_pending);

    qemu_put_be32s(f, &s->intregm_disabled);

    qemu_put_be32s(f, &s->target_cpu);

}

static int slavio_intctl_load(QEMUFile *f, void *opaque, int version_id)

{

    SLAVIO_INTCTLState *s = opaque;

    int i;

    if (version_id != 1)

        return -EINVAL;

    for (i = 0; i < MAX_CPUS; i++) {

        qemu_get_be32s(f, &s->slaves[i].intreg_pending);

    }

    qemu_get_be32s(f, &s->intregm_pending);

    qemu_get_be32s(f, &s->intregm_disabled);

    qemu_get_be32s(f, &s->target_cpu);

    slavio_check_interrupts(s, 0);

    return 0;

}

static void slavio_intctl_reset(void *opaque)

{

    SLAVIO_INTCTLState *s = opaque;

    int i;

    for (i = 0; i < MAX_CPUS; i++) {

        s->slaves[i].intreg_pending = 0;

    }

    s->intregm_disabled = ~MASTER_IRQ_MASK;

    s->intregm_pending = 0;

    s->target_cpu = 0;

    slavio_check_interrupts(s, 0);

}

static void slavio_intctl_init1(SysBusDevice *dev)

{

    SLAVIO_INTCTLState *s = FROM_SYSBUS(SLAVIO_INTCTLState, dev);

    int io_memory;

    unsigned int i, j;

    qdev_init_gpio_in(&dev->qdev, slavio_set_irq_all, 32 + MAX_CPUS);

    io_memory = cpu_register_io_memory(slavio_intctlm_mem_read,

                                       slavio_intctlm_mem_write, s);

    sysbus_init_mmio(dev, INTCTLM_SIZE, io_memory);

    s->cputimer_mbit = 1 << s->cputimer_bit;

    s->cputimer_lbit = 1 << s->intbit_to_level[s->cputimer_bit];

    for (i = 0; i < MAX_CPUS; i++) {

        for (j = 0; j < MAX_PILS; j++) {

            sysbus_init_irq(dev, &s->cpu_irqs[i][j]);

        }

        io_memory = cpu_register_io_memory(slavio_intctl_mem_read,

                                           slavio_intctl_mem_write,

                                           &s->slaves[i]);

        sysbus_init_mmio(dev, INTCTL_SIZE, io_memory);

        s->slaves[i].cpu = i;

        s->slaves[i].master = s;

    }

    register_savevm("slavio_intctl", -1, 1, slavio_intctl_save,

                    slavio_intctl_load, s);

    qemu_register_reset(slavio_intctl_reset, s);

    slavio_intctl_reset(s);

}

static SysBusDeviceInfo slavio_intctl_info = {

    .init = slavio_intctl_init1,

    .qdev.name  = "slavio_intctl",

    .qdev.size  = sizeof(SLAVIO_INTCTLState),

    .qdev.props = (Property[]) {

        {

            .name = "intbit_to_level",

            .info = &qdev_prop_ptr,

            .offset = offsetof(SLAVIO_INTCTLState, intbit_to_level),

        },

        {

            .name = "cputimer_bit",

            .info = &qdev_prop_uint32,

            .offset = offsetof(SLAVIO_INTCTLState, cputimer_bit),

        },

        {/* end of property list */}

    }

};

static void slavio_intctl_register_devices(void)

{

    sysbus_register_withprop(&slavio_intctl_info);

}

device_init(slavio_intctl_register_devices)