Archipelago » qemu

/*

 * QEMU PC System Emulator

 * 

 * Copyright (c) 2003-2004 Fabrice Bellard

 * 

 * Permission is hereby granted, free of charge, to any person obtaining a copy

 * of this software and associated documentation files (the "Software"), to deal

 * in the Software without restriction, including without limitation the rights

 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell

 * copies of the Software, and to permit persons to whom the Software is

 * furnished to do so, subject to the following conditions:

 *

 * The above copyright notice and this permission notice shall be included in

 * all copies or substantial portions of the Software.

 *

 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR

 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,

 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL

 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER

 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,

 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN

 * THE SOFTWARE.

 */

#include <stdlib.h>

#include <stdio.h>

#include <stdarg.h>

#include <string.h>

#include <getopt.h>

#include <inttypes.h>

#include <unistd.h>

#include <sys/mman.h>

#include <fcntl.h>

#include <signal.h>

#include <time.h>

#include <sys/time.h>

#include <malloc.h>

#include <termios.h>

#include <sys/poll.h>

#include <errno.h>

#include <sys/wait.h>

#include <netinet/in.h>

#include "cpu.h"

#include "vl.h"

#define BIOS_FILENAME "bios.bin"

#define VGABIOS_FILENAME "vgabios.bin"

#define LINUX_BOOT_FILENAME "linux_boot.bin"

#define KERNEL_LOAD_ADDR     0x00100000

#define INITRD_LOAD_ADDR     0x00400000

#define KERNEL_PARAMS_ADDR   0x00090000

#define KERNEL_CMDLINE_ADDR  0x00099000

int speaker_data_on;

int dummy_refresh_clock;

static void ioport80_write(CPUState *env, uint32_t addr, uint32_t data)

{

}

#define REG_EQUIPMENT_BYTE          0x14

static void cmos_init(int ram_size, int boot_device)

{

    RTCState *s = &rtc_state;

    int val;

    /* various important CMOS locations needed by PC/Bochs bios */

    s->cmos_data[REG_EQUIPMENT_BYTE] = 0x02; /* FPU is there */

    s->cmos_data[REG_EQUIPMENT_BYTE] |= 0x04; /* PS/2 mouse installed */

    /* memory size */

    val = (ram_size / 1024) - 1024;

    if (val > 65535)

        val = 65535;

    s->cmos_data[0x17] = val;

    s->cmos_data[0x18] = val >> 8;

    s->cmos_data[0x30] = val;

    s->cmos_data[0x31] = val >> 8;

    val = (ram_size / 65536) - ((16 * 1024 * 1024) / 65536);

    if (val > 65535)

        val = 65535;

    s->cmos_data[0x34] = val;

    s->cmos_data[0x35] = val >> 8;

    switch(boot_device) {

    case 'a':

    case 'b':

        s->cmos_data[0x3d] = 0x01; /* floppy boot */

        break;

    default:

    case 'c':

        s->cmos_data[0x3d] = 0x02; /* hard drive boot */

        break;

    case 'd':

        s->cmos_data[0x3d] = 0x03; /* CD-ROM boot */

        break;

    }

}

void cmos_register_fd (uint8_t fd0, uint8_t fd1)

{

    RTCState *s = &rtc_state;

    int nb = 0;

    s->cmos_data[0x10] = 0;

    switch (fd0) {

    case 0:

        /* 1.44 Mb 3"5 drive */

        s->cmos_data[0x10] |= 0x40;

        break;

    case 1:

        /* 2.88 Mb 3"5 drive */

        s->cmos_data[0x10] |= 0x60;

        break;

    case 2:

        /* 1.2 Mb 5"5 drive */

        s->cmos_data[0x10] |= 0x20;

        break;

    }

    switch (fd1) {

    case 0:

        /* 1.44 Mb 3"5 drive */

        s->cmos_data[0x10] |= 0x04;

        break;

    case 1:

        /* 2.88 Mb 3"5 drive */

        s->cmos_data[0x10] |= 0x06;

        break;

    case 2:

        /* 1.2 Mb 5"5 drive */

        s->cmos_data[0x10] |= 0x02;

        break;

    }

    if (fd0 < 3)

        nb++;

    if (fd1 < 3)

        nb++;

    switch (nb) {

    case 0:

        break;

    case 1:

        s->cmos_data[REG_EQUIPMENT_BYTE] |= 0x01; /* 1 drive, ready for boot */

        break;

    case 2:

        s->cmos_data[REG_EQUIPMENT_BYTE] |= 0x41; /* 2 drives, ready for boot */

        break;

    }

}

void speaker_ioport_write(CPUState *env, uint32_t addr, uint32_t val)

{

    speaker_data_on = (val >> 1) & 1;

    pit_set_gate(&pit_channels[2], val & 1);

}

uint32_t speaker_ioport_read(CPUState *env, uint32_t addr)

{

    int out;

    out = pit_get_out(&pit_channels[2]);

    dummy_refresh_clock ^= 1;

    return (speaker_data_on << 1) | pit_channels[2].gate | (out << 5) |

      (dummy_refresh_clock << 4);

}

/***********************************************************/

/* PC floppy disk controler emulation glue */

#define PC_FDC_DMA  0x2

#define PC_FDC_IRQ  0x6

#define PC_FDC_BASE 0x3F0

static void fdctrl_register (unsigned char **disknames, int ro,

                             char boot_device)

{

    int i;

    fdctrl_init(PC_FDC_IRQ, PC_FDC_DMA, 0, PC_FDC_BASE, boot_device);

    for (i = 0; i < MAX_FD; i++) {

        if (disknames[i] != NULL)

            fdctrl_disk_change(i, disknames[i], ro);

    }

}

/***********************************************************/

/* Bochs BIOS debug ports */

void bochs_bios_write(CPUX86State *env, uint32_t addr, uint32_t val)

{

    switch(addr) {

        /* Bochs BIOS messages */

    case 0x400:

    case 0x401:

        fprintf(stderr, "BIOS panic at rombios.c, line %d\n", val);

        exit(1);

    case 0x402:

    case 0x403:

#ifdef DEBUG_BIOS

        fprintf(stderr, "%c", val);

#endif

        break;

        /* LGPL'ed VGA BIOS messages */

    case 0x501:

    case 0x502:

        fprintf(stderr, "VGA BIOS panic, line %d\n", val);

        exit(1);

    case 0x500:

    case 0x503:

#ifdef DEBUG_BIOS

        fprintf(stderr, "%c", val);

#endif

        break;

    }

}

void bochs_bios_init(void)

{

    register_ioport_write(0x400, 1, bochs_bios_write, 2);

    register_ioport_write(0x401, 1, bochs_bios_write, 2);

    register_ioport_write(0x402, 1, bochs_bios_write, 1);

    register_ioport_write(0x403, 1, bochs_bios_write, 1);

    register_ioport_write(0x501, 1, bochs_bios_write, 2);

    register_ioport_write(0x502, 1, bochs_bios_write, 2);

    register_ioport_write(0x500, 1, bochs_bios_write, 1);

    register_ioport_write(0x503, 1, bochs_bios_write, 1);

}

int load_kernel(const char *filename, uint8_t *addr, 

                uint8_t *real_addr)

{

    int fd, size;

    int setup_sects;

    fd = open(filename, O_RDONLY);

    if (fd < 0)

        return -1;

    /* load 16 bit code */

    if (read(fd, real_addr, 512) != 512)

        goto fail;

    setup_sects = real_addr[0x1F1];

    if (!setup_sects)

        setup_sects = 4;

    if (read(fd, real_addr + 512, setup_sects * 512) != 

        setup_sects * 512)

        goto fail;

    /* load 32 bit code */

    size = read(fd, addr, 16 * 1024 * 1024);

    if (size < 0)

        goto fail;

    close(fd);

    return size;

 fail:

    close(fd);

    return -1;

}

/* PC hardware initialisation */

void pc_init(int ram_size, int vga_ram_size, int boot_device,

             DisplayState *ds, const char **fd_filename, int snapshot,

             const char *kernel_filename, const char *kernel_cmdline,

             const char *initrd_filename)

{

    char buf[1024];

    int ret, linux_boot, initrd_size;

    linux_boot = (kernel_filename != NULL);

    /* allocate RAM */

    cpu_register_physical_memory(0, ram_size, 0);

    /* BIOS load */

    snprintf(buf, sizeof(buf), "%s/%s", bios_dir, BIOS_FILENAME);

    ret = load_image(buf, phys_ram_base + 0x000f0000);

    if (ret != 0x10000) {

        fprintf(stderr, "qemu: could not load PC bios '%s'\n", buf);

        exit(1);

    }

    /* VGA BIOS load */

    snprintf(buf, sizeof(buf), "%s/%s", bios_dir, VGABIOS_FILENAME);

    ret = load_image(buf, phys_ram_base + 0x000c0000);

    /* setup basic memory access */

    cpu_register_physical_memory(0xc0000, 0x10000, 0xc0000 | IO_MEM_ROM);

    cpu_register_physical_memory(0xf0000, 0x10000, 0xf0000 | IO_MEM_ROM);

    bochs_bios_init();

    if (linux_boot) {

        uint8_t bootsect[512];

        if (bs_table[0] == NULL) {

            fprintf(stderr, "A disk image must be given for 'hda' when booting a Linux kernel\n");

            exit(1);

        }

        snprintf(buf, sizeof(buf), "%s/%s", bios_dir, LINUX_BOOT_FILENAME);

        ret = load_image(buf, bootsect);

        if (ret != sizeof(bootsect)) {

            fprintf(stderr, "qemu: could not load linux boot sector '%s'\n",

                    buf);

            exit(1);

        }

        bdrv_set_boot_sector(bs_table[0], bootsect, sizeof(bootsect));

        /* now we can load the kernel */

        ret = load_kernel(kernel_filename, 

                          phys_ram_base + KERNEL_LOAD_ADDR,

                          phys_ram_base + KERNEL_PARAMS_ADDR);

        if (ret < 0) {

            fprintf(stderr, "qemu: could not load kernel '%s'\n", 

                    kernel_filename);

            exit(1);

        }

        /* load initrd */

        initrd_size = 0;

        if (initrd_filename) {

            initrd_size = load_image(initrd_filename, phys_ram_base + INITRD_LOAD_ADDR);

            if (initrd_size < 0) {

                fprintf(stderr, "qemu: could not load initial ram disk '%s'\n", 

                        initrd_filename);

                exit(1);

            }

        }

        if (initrd_size > 0) {

            stl_raw(phys_ram_base + KERNEL_PARAMS_ADDR + 0x218, INITRD_LOAD_ADDR);

            stl_raw(phys_ram_base + KERNEL_PARAMS_ADDR + 0x21c, initrd_size);

        }

        pstrcpy(phys_ram_base + KERNEL_CMDLINE_ADDR, 4096,

                kernel_cmdline);

        stw_raw(phys_ram_base + KERNEL_PARAMS_ADDR + 0x20, 0xA33F);

        stw_raw(phys_ram_base + KERNEL_PARAMS_ADDR + 0x22,

                KERNEL_CMDLINE_ADDR - KERNEL_PARAMS_ADDR);

        /* loader type */

        stw_raw(phys_ram_base + KERNEL_PARAMS_ADDR + 0x210, 0x01);

    }

    /* init basic PC hardware */

    register_ioport_write(0x80, 1, ioport80_write, 1);

    vga_initialize(ds, phys_ram_base + ram_size, ram_size, 

                   vga_ram_size);

    rtc_init(0x70, 8);

    cmos_init(ram_size, boot_device);

    register_ioport_read(0x61, 1, speaker_ioport_read, 1);

    register_ioport_write(0x61, 1, speaker_ioport_write, 1);

    pic_init();

    pit_init();

    serial_init(0x3f8, 4);

    ne2000_init(0x300, 9);

    ide_init();

    kbd_init();

    AUD_init();

    DMA_init();

    SB16_init();

    fdctrl_register((unsigned char **)fd_filename, snapshot, boot_device);

}