Archipelago » qemu

/*

 * PalmOne's (TM) PDAs.

 *

 * Copyright (C) 2006-2007 Andrzej Zaborowski  <balrog@zabor.org>

 *

 * This program is free software; you can redistribute it and/or

 * modify it under the terms of the GNU General Public License as

 * published by the Free Software Foundation; either version 2 of

 * the License, or (at your option) any later version.

 *

 * This program is distributed in the hope that it will be useful,

 * but WITHOUT ANY WARRANTY; without even the implied warranty of

 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

 * GNU General Public License for more details.

 *

 * You should have received a copy of the GNU General Public License

 * along with this program; if not, write to the Free Software

 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,

 * MA 02111-1307 USA

 */

#include "vl.h"

static uint32_t static_readb(void *opaque, target_phys_addr_t offset)

{

    uint32_t *val = (uint32_t *) opaque;

    return *val >> ((offset & 3) << 3);

}

static uint32_t static_readh(void *opaque, target_phys_addr_t offset) {

    uint32_t *val = (uint32_t *) opaque;

    return *val >> ((offset & 1) << 3);

}

static uint32_t static_readw(void *opaque, target_phys_addr_t offset) {

    uint32_t *val = (uint32_t *) opaque;

    return *val >> ((offset & 0) << 3);

}

static void static_write(void *opaque, target_phys_addr_t offset,

                uint32_t value) {

#ifdef SPY

    printf("%s: value %08lx written at " PA_FMT "\n",

                    __FUNCTION__, value, offset);

#endif

}

static CPUReadMemoryFunc *static_readfn[] = {

    static_readb,

    static_readh,

    static_readw,

};

static CPUWriteMemoryFunc *static_writefn[] = {

    static_write,

    static_write,

    static_write,

};

/* Palm Tunsgten|E support */

/* Shared GPIOs */

#define PALMTE_USBDETECT_GPIO        0

#define PALMTE_USB_OR_DC_GPIO        1

#define PALMTE_TSC_GPIO                4

#define PALMTE_PINTDAV_GPIO        6

#define PALMTE_MMC_WP_GPIO        8

#define PALMTE_MMC_POWER_GPIO        9

#define PALMTE_HDQ_GPIO                11

#define PALMTE_HEADPHONES_GPIO        14

#define PALMTE_SPEAKER_GPIO        15

/* MPU private GPIOs */

#define PALMTE_DC_GPIO                2

#define PALMTE_MMC_SWITCH_GPIO        4

#define PALMTE_MMC1_GPIO        6

#define PALMTE_MMC2_GPIO        7

#define PALMTE_MMC3_GPIO        11

static void palmte_microwire_setup(struct omap_mpu_state_s *cpu)

{

}

static struct {

    int row;

    int column;

} palmte_keymap[0x80] = {

    [0 ... 0x7f] = { -1, -1 },

    [0x3b] = { 0, 0 },        /* F1        -> Calendar */

    [0x3c] = { 1, 0 },        /* F2        -> Contacts */

    [0x3d] = { 2, 0 },        /* F3        -> Tasks List */

    [0x3e] = { 3, 0 },        /* F4        -> Note Pad */

    [0x01] = { 4, 0 },        /* Esc        -> Power */

    [0x4b] = { 0, 1 },        /*            Left */

    [0x50] = { 1, 1 },        /*            Down */

    [0x48] = { 2, 1 },        /*           Up */

    [0x4d] = { 3, 1 },        /*           Right */

    [0x4c] = { 4, 1 },        /*            Centre */

    [0x39] = { 4, 1 },        /* Spc        -> Centre */

};

static void palmte_button_event(void *opaque, int keycode)

{

    struct omap_mpu_state_s *cpu = (struct omap_mpu_state_s *) opaque;

    if (palmte_keymap[keycode & 0x7f].row != -1)

        omap_mpuio_key(cpu->mpuio,

                        palmte_keymap[keycode & 0x7f].row,

                        palmte_keymap[keycode & 0x7f].column,

                        !(keycode & 0x80));

}

static void palmte_mmc_cover(void *opaque, int line, int level)

{

    struct omap_mpu_state_s *cpu = (struct omap_mpu_state_s *) opaque;

    qemu_set_irq(omap_mpuio_in_get(cpu->mpuio)[PALMTE_MMC_SWITCH_GPIO],

                    !level);

}

static void palmte_init(int ram_size, int vga_ram_size, int boot_device,

                DisplayState *ds, const char **fd_filename, int snapshot,

                const char *kernel_filename, const char *kernel_cmdline,

                const char *initrd_filename, const char *cpu_model)

{

    struct omap_mpu_state_s *cpu;

    int flash_size = 0x00800000;

    int sdram_size = 0x02000000;

    int io;

    static uint32_t cs0val = 0xffffffff;

    static uint32_t cs1val = 0x0000e1a0;

    static uint32_t cs2val = 0x0000e1a0;

    static uint32_t cs3val = 0xe1a0e1a0;

    ram_addr_t phys_flash;

    int rom_size, rom_loaded = 0;

    if (ram_size < flash_size + sdram_size + OMAP15XX_SRAM_SIZE) {

        fprintf(stderr, "This architecture uses %i bytes of memory\n",

                        flash_size + sdram_size + OMAP15XX_SRAM_SIZE);

        exit(1);

    }

    cpu = omap310_mpu_init(sdram_size, ds, cpu_model);

    /* External Flash (EMIFS) */

    cpu_register_physical_memory(OMAP_CS0_BASE, flash_size,

                    (phys_flash = qemu_ram_alloc(flash_size)) | IO_MEM_ROM);

    io = cpu_register_io_memory(0, static_readfn, static_writefn, &cs0val);

    cpu_register_physical_memory(OMAP_CS0_BASE + flash_size,

                    OMAP_CS0_SIZE - flash_size, io);

    io = cpu_register_io_memory(0, static_readfn, static_writefn, &cs1val);

    cpu_register_physical_memory(OMAP_CS1_BASE, OMAP_CS1_SIZE, io);

    io = cpu_register_io_memory(0, static_readfn, static_writefn, &cs2val);

    cpu_register_physical_memory(OMAP_CS2_BASE, OMAP_CS2_SIZE, io);

    io = cpu_register_io_memory(0, static_readfn, static_writefn, &cs3val);

    cpu_register_physical_memory(OMAP_CS3_BASE, OMAP_CS3_SIZE, io);

    palmte_microwire_setup(cpu);

    qemu_add_kbd_event_handler(palmte_button_event, cpu);

    omap_mmc_handlers(cpu->mmc, 0,

                    qemu_allocate_irqs(palmte_mmc_cover, cpu, 1)[0]);

    /* Setup initial (reset) machine state */

    if (nb_option_roms) {

        rom_size = get_image_size(option_rom[0]);

        if (rom_size > flash_size)

            fprintf(stderr, "%s: ROM image too big (%x > %x)\n",

                            __FUNCTION__, rom_size, flash_size);

        else if (rom_size > 0 && load_image(option_rom[0],

                                phys_ram_base + phys_flash) > 0) {

            rom_loaded = 1;

            cpu->env->regs[15] = 0x00000000;

        } else

            fprintf(stderr, "%s: error loading '%s'\n",

                            __FUNCTION__, option_rom[0]);

    }

    if (!rom_loaded && !kernel_filename) {

        fprintf(stderr, "Kernel or ROM image must be specified\n");

        exit(1);

    }

    /* Load the kernel.  */

    if (kernel_filename) {

        /* Start at bootloader.  */

        cpu->env->regs[15] = OMAP_EMIFF_BASE;

        arm_load_kernel(cpu->env, sdram_size, kernel_filename, kernel_cmdline,

                        initrd_filename, 0x331, OMAP_EMIFF_BASE);

    }

    dpy_resize(ds, 320, 320);

}

QEMUMachine palmte_machine = {

    "cheetah",

    "Palm Tungsten|E aka. Cheetah PDA (OMAP310)",

    palmte_init,

};