root / hw / pflash_cfi01.c @ 99a0949b
History | View | Annotate | Download (17.5 kB)
| 1 |
/*
|
|---|---|
| 2 |
* CFI parallel flash with Intel command set emulation
|
| 3 |
*
|
| 4 |
* Copyright (c) 2006 Thorsten Zitterell
|
| 5 |
* Copyright (c) 2005 Jocelyn Mayer
|
| 6 |
*
|
| 7 |
* This library is free software; you can redistribute it and/or
|
| 8 |
* modify it under the terms of the GNU Lesser General Public
|
| 9 |
* License as published by the Free Software Foundation; either
|
| 10 |
* version 2 of the License, or (at your option) any later version.
|
| 11 |
*
|
| 12 |
* This library is distributed in the hope that it will be useful,
|
| 13 |
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
| 14 |
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
| 15 |
* Lesser General Public License for more details.
|
| 16 |
*
|
| 17 |
* You should have received a copy of the GNU Lesser General Public
|
| 18 |
* License along with this library; if not, see <http://www.gnu.org/licenses/>.
|
| 19 |
*/
|
| 20 |
|
| 21 |
/*
|
| 22 |
* For now, this code can emulate flashes of 1, 2 or 4 bytes width.
|
| 23 |
* Supported commands/modes are:
|
| 24 |
* - flash read
|
| 25 |
* - flash write
|
| 26 |
* - flash ID read
|
| 27 |
* - sector erase
|
| 28 |
* - CFI queries
|
| 29 |
*
|
| 30 |
* It does not support timings
|
| 31 |
* It does not support flash interleaving
|
| 32 |
* It does not implement software data protection as found in many real chips
|
| 33 |
* It does not implement erase suspend/resume commands
|
| 34 |
* It does not implement multiple sectors erase
|
| 35 |
*
|
| 36 |
* It does not implement much more ...
|
| 37 |
*/
|
| 38 |
|
| 39 |
#include "hw.h" |
| 40 |
#include "flash.h" |
| 41 |
#include "block.h" |
| 42 |
#include "qemu-timer.h" |
| 43 |
|
| 44 |
#define PFLASH_BUG(fmt, ...) \
|
| 45 |
do { \
|
| 46 |
printf("PFLASH: Possible BUG - " fmt, ## __VA_ARGS__); \ |
| 47 |
exit(1); \
|
| 48 |
} while(0) |
| 49 |
|
| 50 |
/* #define PFLASH_DEBUG */
|
| 51 |
#ifdef PFLASH_DEBUG
|
| 52 |
#define DPRINTF(fmt, ...) \
|
| 53 |
do { \
|
| 54 |
printf("PFLASH: " fmt , ## __VA_ARGS__); \ |
| 55 |
} while (0) |
| 56 |
#else
|
| 57 |
#define DPRINTF(fmt, ...) do { } while (0) |
| 58 |
#endif
|
| 59 |
|
| 60 |
struct pflash {
|
| 61 |
BlockDriverState *bs; |
| 62 |
a_target_phys_addr base; |
| 63 |
a_target_phys_addr sector_len; |
| 64 |
a_target_phys_addr total_len; |
| 65 |
int width;
|
| 66 |
int wcycle; /* if 0, the flash is read normally */ |
| 67 |
int bypass;
|
| 68 |
int ro;
|
| 69 |
uint8_t cmd; |
| 70 |
uint8_t status; |
| 71 |
uint16_t ident[4];
|
| 72 |
uint8_t cfi_len; |
| 73 |
uint8_t cfi_table[0x52];
|
| 74 |
a_target_phys_addr counter; |
| 75 |
QEMUTimer *timer; |
| 76 |
a_ram_addr off; |
| 77 |
int fl_mem;
|
| 78 |
void *storage;
|
| 79 |
}; |
| 80 |
|
| 81 |
static void pflash_timer (void *opaque) |
| 82 |
{
|
| 83 |
a_pflash *pfl = opaque; |
| 84 |
|
| 85 |
DPRINTF("%s: command %02x done\n", __func__, pfl->cmd);
|
| 86 |
/* Reset flash */
|
| 87 |
pfl->status ^= 0x80;
|
| 88 |
if (pfl->bypass) {
|
| 89 |
pfl->wcycle = 2;
|
| 90 |
} else {
|
| 91 |
cpu_register_physical_memory(pfl->base, pfl->total_len, |
| 92 |
pfl->off | IO_MEM_ROMD | pfl->fl_mem); |
| 93 |
pfl->wcycle = 0;
|
| 94 |
} |
| 95 |
pfl->cmd = 0;
|
| 96 |
} |
| 97 |
|
| 98 |
static uint32_t pflash_read (a_pflash *pfl, a_target_phys_addr offset,
|
| 99 |
int width)
|
| 100 |
{
|
| 101 |
a_target_phys_addr boff; |
| 102 |
uint32_t ret; |
| 103 |
uint8_t *p; |
| 104 |
|
| 105 |
ret = -1;
|
| 106 |
boff = offset & 0xFF; /* why this here ?? */ |
| 107 |
|
| 108 |
if (pfl->width == 2) |
| 109 |
boff = boff >> 1;
|
| 110 |
else if (pfl->width == 4) |
| 111 |
boff = boff >> 2;
|
| 112 |
|
| 113 |
#if 0
|
| 114 |
DPRINTF("%s: reading offset " TARGET_FMT_plx " under cmd %02x width %d\n",
|
| 115 |
__func__, offset, pfl->cmd, width);
|
| 116 |
#endif
|
| 117 |
switch (pfl->cmd) {
|
| 118 |
case 0x00: |
| 119 |
/* Flash area read */
|
| 120 |
p = pfl->storage; |
| 121 |
switch (width) {
|
| 122 |
case 1: |
| 123 |
ret = p[offset]; |
| 124 |
DPRINTF("%s: data offset " TARGET_FMT_plx " %02x\n", |
| 125 |
__func__, offset, ret); |
| 126 |
break;
|
| 127 |
case 2: |
| 128 |
#if defined(TARGET_WORDS_BIGENDIAN)
|
| 129 |
ret = p[offset] << 8;
|
| 130 |
ret |= p[offset + 1];
|
| 131 |
#else
|
| 132 |
ret = p[offset]; |
| 133 |
ret |= p[offset + 1] << 8; |
| 134 |
#endif
|
| 135 |
DPRINTF("%s: data offset " TARGET_FMT_plx " %04x\n", |
| 136 |
__func__, offset, ret); |
| 137 |
break;
|
| 138 |
case 4: |
| 139 |
#if defined(TARGET_WORDS_BIGENDIAN)
|
| 140 |
ret = p[offset] << 24;
|
| 141 |
ret |= p[offset + 1] << 16; |
| 142 |
ret |= p[offset + 2] << 8; |
| 143 |
ret |= p[offset + 3];
|
| 144 |
#else
|
| 145 |
ret = p[offset]; |
| 146 |
ret |= p[offset + 1] << 8; |
| 147 |
ret |= p[offset + 1] << 8; |
| 148 |
ret |= p[offset + 2] << 16; |
| 149 |
ret |= p[offset + 3] << 24; |
| 150 |
#endif
|
| 151 |
DPRINTF("%s: data offset " TARGET_FMT_plx " %08x\n", |
| 152 |
__func__, offset, ret); |
| 153 |
break;
|
| 154 |
default:
|
| 155 |
DPRINTF("BUG in %s\n", __func__);
|
| 156 |
} |
| 157 |
|
| 158 |
break;
|
| 159 |
case 0x20: /* Block erase */ |
| 160 |
case 0x50: /* Clear status register */ |
| 161 |
case 0x60: /* Block /un)lock */ |
| 162 |
case 0x70: /* Status Register */ |
| 163 |
case 0xe8: /* Write block */ |
| 164 |
/* Status register read */
|
| 165 |
ret = pfl->status; |
| 166 |
DPRINTF("%s: status %x\n", __func__, ret);
|
| 167 |
break;
|
| 168 |
case 0x98: /* Query mode */ |
| 169 |
if (boff > pfl->cfi_len)
|
| 170 |
ret = 0;
|
| 171 |
else
|
| 172 |
ret = pfl->cfi_table[boff]; |
| 173 |
break;
|
| 174 |
default:
|
| 175 |
/* This should never happen : reset state & treat it as a read */
|
| 176 |
DPRINTF("%s: unknown command state: %x\n", __func__, pfl->cmd);
|
| 177 |
pfl->wcycle = 0;
|
| 178 |
pfl->cmd = 0;
|
| 179 |
} |
| 180 |
return ret;
|
| 181 |
} |
| 182 |
|
| 183 |
/* update flash content on disk */
|
| 184 |
static void pflash_update(a_pflash *pfl, int offset, |
| 185 |
int size)
|
| 186 |
{
|
| 187 |
int offset_end;
|
| 188 |
if (pfl->bs) {
|
| 189 |
offset_end = offset + size; |
| 190 |
/* round to sectors */
|
| 191 |
offset = offset >> 9;
|
| 192 |
offset_end = (offset_end + 511) >> 9; |
| 193 |
bdrv_write(pfl->bs, offset, pfl->storage + (offset << 9),
|
| 194 |
offset_end - offset); |
| 195 |
} |
| 196 |
} |
| 197 |
|
| 198 |
static inline void pflash_data_write(a_pflash *pfl, a_target_phys_addr offset, |
| 199 |
uint32_t value, int width)
|
| 200 |
{
|
| 201 |
uint8_t *p = pfl->storage; |
| 202 |
|
| 203 |
DPRINTF("%s: block write offset " TARGET_FMT_plx
|
| 204 |
" value %x counter " TARGET_FMT_plx "\n", |
| 205 |
__func__, offset, value, pfl->counter); |
| 206 |
switch (width) {
|
| 207 |
case 1: |
| 208 |
p[offset] = value; |
| 209 |
pflash_update(pfl, offset, 1);
|
| 210 |
break;
|
| 211 |
case 2: |
| 212 |
#if defined(TARGET_WORDS_BIGENDIAN)
|
| 213 |
p[offset] = value >> 8;
|
| 214 |
p[offset + 1] = value;
|
| 215 |
#else
|
| 216 |
p[offset] = value; |
| 217 |
p[offset + 1] = value >> 8; |
| 218 |
#endif
|
| 219 |
pflash_update(pfl, offset, 2);
|
| 220 |
break;
|
| 221 |
case 4: |
| 222 |
#if defined(TARGET_WORDS_BIGENDIAN)
|
| 223 |
p[offset] = value >> 24;
|
| 224 |
p[offset + 1] = value >> 16; |
| 225 |
p[offset + 2] = value >> 8; |
| 226 |
p[offset + 3] = value;
|
| 227 |
#else
|
| 228 |
p[offset] = value; |
| 229 |
p[offset + 1] = value >> 8; |
| 230 |
p[offset + 2] = value >> 16; |
| 231 |
p[offset + 3] = value >> 24; |
| 232 |
#endif
|
| 233 |
pflash_update(pfl, offset, 4);
|
| 234 |
break;
|
| 235 |
} |
| 236 |
|
| 237 |
} |
| 238 |
|
| 239 |
static void pflash_write(a_pflash *pfl, a_target_phys_addr offset, |
| 240 |
uint32_t value, int width)
|
| 241 |
{
|
| 242 |
a_target_phys_addr boff; |
| 243 |
uint8_t *p; |
| 244 |
uint8_t cmd; |
| 245 |
|
| 246 |
cmd = value; |
| 247 |
|
| 248 |
DPRINTF("%s: writing offset " TARGET_FMT_plx " value %08x width %d wcycle 0x%x\n", |
| 249 |
__func__, offset, value, width, pfl->wcycle); |
| 250 |
|
| 251 |
/* Set the device in I/O access mode */
|
| 252 |
cpu_register_physical_memory(pfl->base, pfl->total_len, pfl->fl_mem); |
| 253 |
boff = offset & (pfl->sector_len - 1);
|
| 254 |
|
| 255 |
if (pfl->width == 2) |
| 256 |
boff = boff >> 1;
|
| 257 |
else if (pfl->width == 4) |
| 258 |
boff = boff >> 2;
|
| 259 |
|
| 260 |
switch (pfl->wcycle) {
|
| 261 |
case 0: |
| 262 |
/* read mode */
|
| 263 |
switch (cmd) {
|
| 264 |
case 0x00: /* ??? */ |
| 265 |
goto reset_flash;
|
| 266 |
case 0x10: /* Single Byte Program */ |
| 267 |
case 0x40: /* Single Byte Program */ |
| 268 |
DPRINTF("%s: Single Byte Program\n", __func__);
|
| 269 |
break;
|
| 270 |
case 0x20: /* Block erase */ |
| 271 |
p = pfl->storage; |
| 272 |
offset &= ~(pfl->sector_len - 1);
|
| 273 |
|
| 274 |
DPRINTF("%s: block erase at " TARGET_FMT_plx " bytes " |
| 275 |
TARGET_FMT_plx "\n",
|
| 276 |
__func__, offset, pfl->sector_len); |
| 277 |
|
| 278 |
memset(p + offset, 0xff, pfl->sector_len);
|
| 279 |
pflash_update(pfl, offset, pfl->sector_len); |
| 280 |
pfl->status |= 0x80; /* Ready! */ |
| 281 |
break;
|
| 282 |
case 0x50: /* Clear status bits */ |
| 283 |
DPRINTF("%s: Clear status bits\n", __func__);
|
| 284 |
pfl->status = 0x0;
|
| 285 |
goto reset_flash;
|
| 286 |
case 0x60: /* Block (un)lock */ |
| 287 |
DPRINTF("%s: Block unlock\n", __func__);
|
| 288 |
break;
|
| 289 |
case 0x70: /* Status Register */ |
| 290 |
DPRINTF("%s: Read status register\n", __func__);
|
| 291 |
pfl->cmd = cmd; |
| 292 |
return;
|
| 293 |
case 0x98: /* CFI query */ |
| 294 |
DPRINTF("%s: CFI query\n", __func__);
|
| 295 |
break;
|
| 296 |
case 0xe8: /* Write to buffer */ |
| 297 |
DPRINTF("%s: Write to buffer\n", __func__);
|
| 298 |
pfl->status |= 0x80; /* Ready! */ |
| 299 |
break;
|
| 300 |
case 0xff: /* Read array mode */ |
| 301 |
DPRINTF("%s: Read array mode\n", __func__);
|
| 302 |
goto reset_flash;
|
| 303 |
default:
|
| 304 |
goto error_flash;
|
| 305 |
} |
| 306 |
pfl->wcycle++; |
| 307 |
pfl->cmd = cmd; |
| 308 |
return;
|
| 309 |
case 1: |
| 310 |
switch (pfl->cmd) {
|
| 311 |
case 0x10: /* Single Byte Program */ |
| 312 |
case 0x40: /* Single Byte Program */ |
| 313 |
DPRINTF("%s: Single Byte Program\n", __func__);
|
| 314 |
pflash_data_write(pfl, offset, value, width); |
| 315 |
pfl->status |= 0x80; /* Ready! */ |
| 316 |
pfl->wcycle = 0;
|
| 317 |
break;
|
| 318 |
case 0x20: /* Block erase */ |
| 319 |
case 0x28: |
| 320 |
if (cmd == 0xd0) { /* confirm */ |
| 321 |
pfl->wcycle = 0;
|
| 322 |
pfl->status |= 0x80;
|
| 323 |
} else if (cmd == 0xff) { /* read array mode */ |
| 324 |
goto reset_flash;
|
| 325 |
} else
|
| 326 |
goto error_flash;
|
| 327 |
|
| 328 |
break;
|
| 329 |
case 0xe8: |
| 330 |
DPRINTF("%s: block write of %x bytes\n", __func__, value);
|
| 331 |
pfl->counter = value; |
| 332 |
pfl->wcycle++; |
| 333 |
break;
|
| 334 |
case 0x60: |
| 335 |
if (cmd == 0xd0) { |
| 336 |
pfl->wcycle = 0;
|
| 337 |
pfl->status |= 0x80;
|
| 338 |
} else if (cmd == 0x01) { |
| 339 |
pfl->wcycle = 0;
|
| 340 |
pfl->status |= 0x80;
|
| 341 |
} else if (cmd == 0xff) { |
| 342 |
goto reset_flash;
|
| 343 |
} else {
|
| 344 |
DPRINTF("%s: Unknown (un)locking command\n", __func__);
|
| 345 |
goto reset_flash;
|
| 346 |
} |
| 347 |
break;
|
| 348 |
case 0x98: |
| 349 |
if (cmd == 0xff) { |
| 350 |
goto reset_flash;
|
| 351 |
} else {
|
| 352 |
DPRINTF("%s: leaving query mode\n", __func__);
|
| 353 |
} |
| 354 |
break;
|
| 355 |
default:
|
| 356 |
goto error_flash;
|
| 357 |
} |
| 358 |
return;
|
| 359 |
case 2: |
| 360 |
switch (pfl->cmd) {
|
| 361 |
case 0xe8: /* Block write */ |
| 362 |
pflash_data_write(pfl, offset, value, width); |
| 363 |
|
| 364 |
pfl->status |= 0x80;
|
| 365 |
|
| 366 |
if (!pfl->counter) {
|
| 367 |
DPRINTF("%s: block write finished\n", __func__);
|
| 368 |
pfl->wcycle++; |
| 369 |
} |
| 370 |
|
| 371 |
pfl->counter--; |
| 372 |
break;
|
| 373 |
default:
|
| 374 |
goto error_flash;
|
| 375 |
} |
| 376 |
return;
|
| 377 |
case 3: /* Confirm mode */ |
| 378 |
switch (pfl->cmd) {
|
| 379 |
case 0xe8: /* Block write */ |
| 380 |
if (cmd == 0xd0) { |
| 381 |
pfl->wcycle = 0;
|
| 382 |
pfl->status |= 0x80;
|
| 383 |
} else {
|
| 384 |
DPRINTF("%s: unknown command for \"write block\"\n", __func__);
|
| 385 |
PFLASH_BUG("Write block confirm");
|
| 386 |
goto reset_flash;
|
| 387 |
} |
| 388 |
break;
|
| 389 |
default:
|
| 390 |
goto error_flash;
|
| 391 |
} |
| 392 |
return;
|
| 393 |
default:
|
| 394 |
/* Should never happen */
|
| 395 |
DPRINTF("%s: invalid write state\n", __func__);
|
| 396 |
goto reset_flash;
|
| 397 |
} |
| 398 |
return;
|
| 399 |
|
| 400 |
error_flash:
|
| 401 |
printf("%s: Unimplemented flash cmd sequence "
|
| 402 |
"(offset " TARGET_FMT_plx ", wcycle 0x%x cmd 0x%x value 0x%x)\n", |
| 403 |
__func__, offset, pfl->wcycle, pfl->cmd, value); |
| 404 |
|
| 405 |
reset_flash:
|
| 406 |
cpu_register_physical_memory(pfl->base, pfl->total_len, |
| 407 |
pfl->off | IO_MEM_ROMD | pfl->fl_mem); |
| 408 |
|
| 409 |
pfl->bypass = 0;
|
| 410 |
pfl->wcycle = 0;
|
| 411 |
pfl->cmd = 0;
|
| 412 |
return;
|
| 413 |
} |
| 414 |
|
| 415 |
|
| 416 |
static uint32_t pflash_readb (void *opaque, a_target_phys_addr addr) |
| 417 |
{
|
| 418 |
return pflash_read(opaque, addr, 1); |
| 419 |
} |
| 420 |
|
| 421 |
static uint32_t pflash_readw (void *opaque, a_target_phys_addr addr) |
| 422 |
{
|
| 423 |
a_pflash *pfl = opaque; |
| 424 |
|
| 425 |
return pflash_read(pfl, addr, 2); |
| 426 |
} |
| 427 |
|
| 428 |
static uint32_t pflash_readl (void *opaque, a_target_phys_addr addr) |
| 429 |
{
|
| 430 |
a_pflash *pfl = opaque; |
| 431 |
|
| 432 |
return pflash_read(pfl, addr, 4); |
| 433 |
} |
| 434 |
|
| 435 |
static void pflash_writeb (void *opaque, a_target_phys_addr addr, |
| 436 |
uint32_t value) |
| 437 |
{
|
| 438 |
pflash_write(opaque, addr, value, 1);
|
| 439 |
} |
| 440 |
|
| 441 |
static void pflash_writew (void *opaque, a_target_phys_addr addr, |
| 442 |
uint32_t value) |
| 443 |
{
|
| 444 |
a_pflash *pfl = opaque; |
| 445 |
|
| 446 |
pflash_write(pfl, addr, value, 2);
|
| 447 |
} |
| 448 |
|
| 449 |
static void pflash_writel (void *opaque, a_target_phys_addr addr, |
| 450 |
uint32_t value) |
| 451 |
{
|
| 452 |
a_pflash *pfl = opaque; |
| 453 |
|
| 454 |
pflash_write(pfl, addr, value, 4);
|
| 455 |
} |
| 456 |
|
| 457 |
static CPUWriteMemoryFunc * const pflash_write_ops[] = { |
| 458 |
&pflash_writeb, |
| 459 |
&pflash_writew, |
| 460 |
&pflash_writel, |
| 461 |
}; |
| 462 |
|
| 463 |
static CPUReadMemoryFunc * const pflash_read_ops[] = { |
| 464 |
&pflash_readb, |
| 465 |
&pflash_readw, |
| 466 |
&pflash_readl, |
| 467 |
}; |
| 468 |
|
| 469 |
/* Count trailing zeroes of a 32 bits quantity */
|
| 470 |
static int ctz32 (uint32_t n) |
| 471 |
{
|
| 472 |
int ret;
|
| 473 |
|
| 474 |
ret = 0;
|
| 475 |
if (!(n & 0xFFFF)) { |
| 476 |
ret += 16;
|
| 477 |
n = n >> 16;
|
| 478 |
} |
| 479 |
if (!(n & 0xFF)) { |
| 480 |
ret += 8;
|
| 481 |
n = n >> 8;
|
| 482 |
} |
| 483 |
if (!(n & 0xF)) { |
| 484 |
ret += 4;
|
| 485 |
n = n >> 4;
|
| 486 |
} |
| 487 |
if (!(n & 0x3)) { |
| 488 |
ret += 2;
|
| 489 |
n = n >> 2;
|
| 490 |
} |
| 491 |
if (!(n & 0x1)) { |
| 492 |
ret++; |
| 493 |
n = n >> 1;
|
| 494 |
} |
| 495 |
#if 0 /* This is not necessary as n is never 0 */
|
| 496 |
if (!n)
|
| 497 |
ret++;
|
| 498 |
#endif
|
| 499 |
|
| 500 |
return ret;
|
| 501 |
} |
| 502 |
|
| 503 |
a_pflash *pflash_cfi01_register(a_target_phys_addr base, a_ram_addr off, |
| 504 |
BlockDriverState *bs, uint32_t sector_len, |
| 505 |
int nb_blocs, int width, |
| 506 |
uint16_t id0, uint16_t id1, |
| 507 |
uint16_t id2, uint16_t id3) |
| 508 |
{
|
| 509 |
a_pflash *pfl; |
| 510 |
a_target_phys_addr total_len; |
| 511 |
int ret;
|
| 512 |
|
| 513 |
total_len = sector_len * nb_blocs; |
| 514 |
|
| 515 |
/* XXX: to be fixed */
|
| 516 |
#if 0
|
| 517 |
if (total_len != (8 * 1024 * 1024) && total_len != (16 * 1024 * 1024) &&
|
| 518 |
total_len != (32 * 1024 * 1024) && total_len != (64 * 1024 * 1024))
|
| 519 |
return NULL;
|
| 520 |
#endif
|
| 521 |
|
| 522 |
pfl = qemu_mallocz(sizeof(a_pflash));
|
| 523 |
|
| 524 |
/* FIXME: Allocate ram ourselves. */
|
| 525 |
pfl->storage = qemu_get_ram_ptr(off); |
| 526 |
pfl->fl_mem = cpu_register_io_memory( |
| 527 |
pflash_read_ops, pflash_write_ops, pfl); |
| 528 |
pfl->off = off; |
| 529 |
cpu_register_physical_memory(base, total_len, |
| 530 |
off | pfl->fl_mem | IO_MEM_ROMD); |
| 531 |
|
| 532 |
pfl->bs = bs; |
| 533 |
if (pfl->bs) {
|
| 534 |
/* read the initial flash content */
|
| 535 |
ret = bdrv_read(pfl->bs, 0, pfl->storage, total_len >> 9); |
| 536 |
if (ret < 0) { |
| 537 |
cpu_unregister_io_memory(pfl->fl_mem); |
| 538 |
qemu_free(pfl); |
| 539 |
return NULL; |
| 540 |
} |
| 541 |
} |
| 542 |
#if 0 /* XXX: there should be a bit to set up read-only,
|
| 543 |
* the same way the hardware does (with WP pin).
|
| 544 |
*/
|
| 545 |
pfl->ro = 1;
|
| 546 |
#else
|
| 547 |
pfl->ro = 0;
|
| 548 |
#endif
|
| 549 |
pfl->timer = qemu_new_timer(vm_clock, pflash_timer, pfl); |
| 550 |
pfl->base = base; |
| 551 |
pfl->sector_len = sector_len; |
| 552 |
pfl->total_len = total_len; |
| 553 |
pfl->width = width; |
| 554 |
pfl->wcycle = 0;
|
| 555 |
pfl->cmd = 0;
|
| 556 |
pfl->status = 0;
|
| 557 |
pfl->ident[0] = id0;
|
| 558 |
pfl->ident[1] = id1;
|
| 559 |
pfl->ident[2] = id2;
|
| 560 |
pfl->ident[3] = id3;
|
| 561 |
/* Hardcoded CFI table */
|
| 562 |
pfl->cfi_len = 0x52;
|
| 563 |
/* Standard "QRY" string */
|
| 564 |
pfl->cfi_table[0x10] = 'Q'; |
| 565 |
pfl->cfi_table[0x11] = 'R'; |
| 566 |
pfl->cfi_table[0x12] = 'Y'; |
| 567 |
/* Command set (Intel) */
|
| 568 |
pfl->cfi_table[0x13] = 0x01; |
| 569 |
pfl->cfi_table[0x14] = 0x00; |
| 570 |
/* Primary extended table address (none) */
|
| 571 |
pfl->cfi_table[0x15] = 0x31; |
| 572 |
pfl->cfi_table[0x16] = 0x00; |
| 573 |
/* Alternate command set (none) */
|
| 574 |
pfl->cfi_table[0x17] = 0x00; |
| 575 |
pfl->cfi_table[0x18] = 0x00; |
| 576 |
/* Alternate extended table (none) */
|
| 577 |
pfl->cfi_table[0x19] = 0x00; |
| 578 |
pfl->cfi_table[0x1A] = 0x00; |
| 579 |
/* Vcc min */
|
| 580 |
pfl->cfi_table[0x1B] = 0x45; |
| 581 |
/* Vcc max */
|
| 582 |
pfl->cfi_table[0x1C] = 0x55; |
| 583 |
/* Vpp min (no Vpp pin) */
|
| 584 |
pfl->cfi_table[0x1D] = 0x00; |
| 585 |
/* Vpp max (no Vpp pin) */
|
| 586 |
pfl->cfi_table[0x1E] = 0x00; |
| 587 |
/* Reserved */
|
| 588 |
pfl->cfi_table[0x1F] = 0x07; |
| 589 |
/* Timeout for min size buffer write */
|
| 590 |
pfl->cfi_table[0x20] = 0x07; |
| 591 |
/* Typical timeout for block erase */
|
| 592 |
pfl->cfi_table[0x21] = 0x0a; |
| 593 |
/* Typical timeout for full chip erase (4096 ms) */
|
| 594 |
pfl->cfi_table[0x22] = 0x00; |
| 595 |
/* Reserved */
|
| 596 |
pfl->cfi_table[0x23] = 0x04; |
| 597 |
/* Max timeout for buffer write */
|
| 598 |
pfl->cfi_table[0x24] = 0x04; |
| 599 |
/* Max timeout for block erase */
|
| 600 |
pfl->cfi_table[0x25] = 0x04; |
| 601 |
/* Max timeout for chip erase */
|
| 602 |
pfl->cfi_table[0x26] = 0x00; |
| 603 |
/* Device size */
|
| 604 |
pfl->cfi_table[0x27] = ctz32(total_len); // + 1; |
| 605 |
/* Flash device interface (8 & 16 bits) */
|
| 606 |
pfl->cfi_table[0x28] = 0x02; |
| 607 |
pfl->cfi_table[0x29] = 0x00; |
| 608 |
/* Max number of bytes in multi-bytes write */
|
| 609 |
pfl->cfi_table[0x2A] = 0x0B; |
| 610 |
pfl->cfi_table[0x2B] = 0x00; |
| 611 |
/* Number of erase block regions (uniform) */
|
| 612 |
pfl->cfi_table[0x2C] = 0x01; |
| 613 |
/* Erase block region 1 */
|
| 614 |
pfl->cfi_table[0x2D] = nb_blocs - 1; |
| 615 |
pfl->cfi_table[0x2E] = (nb_blocs - 1) >> 8; |
| 616 |
pfl->cfi_table[0x2F] = sector_len >> 8; |
| 617 |
pfl->cfi_table[0x30] = sector_len >> 16; |
| 618 |
|
| 619 |
/* Extended */
|
| 620 |
pfl->cfi_table[0x31] = 'P'; |
| 621 |
pfl->cfi_table[0x32] = 'R'; |
| 622 |
pfl->cfi_table[0x33] = 'I'; |
| 623 |
|
| 624 |
pfl->cfi_table[0x34] = '1'; |
| 625 |
pfl->cfi_table[0x35] = '1'; |
| 626 |
|
| 627 |
pfl->cfi_table[0x36] = 0x00; |
| 628 |
pfl->cfi_table[0x37] = 0x00; |
| 629 |
pfl->cfi_table[0x38] = 0x00; |
| 630 |
pfl->cfi_table[0x39] = 0x00; |
| 631 |
|
| 632 |
pfl->cfi_table[0x3a] = 0x00; |
| 633 |
|
| 634 |
pfl->cfi_table[0x3b] = 0x00; |
| 635 |
pfl->cfi_table[0x3c] = 0x00; |
| 636 |
|
| 637 |
return pfl;
|
| 638 |
} |