History | View | Annotate | Download (9 kB)
sh_pci: qdev conversion
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
target-sh4: fix reset on r2d
Add endianness as io mem parameter
As stated before, devices can be little, big or native endian. Thetarget endianness is not of their concern, so we need to push thingsdown a level.
This patch adds a parameter to cpu_register_io_memory that allows adevice to choose its endianness. For now, all devices simply choose...
Rearrange block headers
Changing block.h or blockdev.h resulted in recompiling most objects.
Move DriveInfo typedef and BlockInterfaceType enum definitionsto qemu-common.h and rearrange blockdev.h use to decrease churn.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
qemu_ram_alloc: Add DeviceState and name parameters
These will be used to generate unique id strings for ramblocks. The namefield is required, the device pointer is optional as most callers don'thave a device. When there's no device or the device isn't a child of...
r2d: fix pflash mapping
sh4: remove dead assignments, spotted by clang analyzer
Value stored is never read.
r2d: always enable IDE and flash
IDE and flash are part of the R2D board, and can't be removed. Emulatethem even if there is no hard-drive plugged to the IDE or if the flashcontent is empty.
hw/r2d: add initrd support
hw/r2d: add flash memory
hw/r2d: add a USB keyboard
The R2D board does not have a PS/2 port, and only support a keyboard onthe USB bus.
SH4/R2D: fix poweroff
The write the the PA_POWOFF register is currently ignored. Fix that bycalling qemu_system_shutdown_request() when a poweroff is requested.
pci: pci.h cleanup: move out stuff not in pci.c
pci.h declares some functions which aren'tdefined in pci.h. Clean up moving thingsto appropriate headers, and update all users.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
rom loader: fix sparc -kernel boot.
Changes:(1) register pstrcpy_targphys() in rom list, it is used for kernelcommand lines by a number of architectures.(2) add rom_ptr() function to get a pointer for applying changesto loaded images. Needed for example to tell the linux kernel...
Fix pci_add nic not to exit on bad model
Monitor command "pci_add ADDR nic model=MODEL" uses pci_nic_init() tocreate the NIC. When MODEL is unknown or "?", this prints to stderrand terminates the program.
Change pci_nic_init() not to treat "?" specially, and to return NULL...
Revert "Get rid of _t suffix"
In the very least, a change like this requires discussion on the list.
The naming convention is goofy and it causes a massive merge problem. Somethinglike this must be presented on the list first so people can provide input...
Get rid of _t suffix
Some not so obvious bits, slirp and Xen were left alone for the timebeing.
Signed-off-by: malc <av1474@comtv.ru>
Compile loader only once
Callers must pass ELF machine, byte swapping and symbol LSB clearinginformation to ELF loader. A.out loader needs page size information, passthat too as a parameter.
Extract prototypes to a separate file. Move loader.[ch] and elf_ops.h under hw....
ide: pass down DriveInfo instead of BlockDriverState
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
We want the argument pass to set_irq to be opaque
piix_pci want to pass more things that the pic
Signed-off-by: Juan Quintela <quintela@redhat.com>Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
ide: split away ide-mmio.c
create ide-mmio.c and place mmio support there.only build ide-mmio support for platforms using it.
Make CPURead/WriteFunc structure 'const'
kill drives_table
First step cleaning up the drives handling. This one does nothing butremoving drives_table[], still it became seriously big.
drive_get_index() is gone and is replaced by drives_get() which handsout DriveInfo pointers instead of a table index. This needs adaption in...
Support addr=... in option argument of -net nic
Make net_client_init() accept addr=, put the value into structNICinfo. Use it in pci_nic_init(), and remove arguments bus anddevfn.
Don't support addr= in third argument of monitor command pci_add,because that clashes with its first argument. Admittedly unelegant....
Remove io_index argument from cpu_register_io_memory()
The parameter is always zero except when registering the three internalio regions (ROM, unassigned, notdirty). Remove the parameter to reducethe API's power, thus facilitating future change.
Signed-off-by: Avi Kivity <avi@redhat.com>...
Convert machine registration to use module init functions
This cleans up quite a lot of #ifdefs, extern variables, and other ugliness.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Remove vga_ram_size
The vga_ram_size argument to machine init functions always has the samevalue, and is ignored by many machines (including SPARC32 which has anobsolete ifdef for VGA_RAM_SIZE).
Remove it and push VGA_RAM_SIZE into vga_int.h.
Signed-off-by: Paul Brook <paul@codesourcery.com>
Adds SM501 usb host emulation feature.It makes usb keyboard available for sh4/r2d system emulation.
The changes for "hw/usb-ohci.c" are as follows. - 'localmem_base' is introduced as OHCIState struct member. SM501 has a local memory, and it is used to pass and receive data with...
Remove redundant ram_require machine properly.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7090 c046a42c-6fe2-441c-8c8c-71466251a162
More phys_ram_base removal.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7060 c046a42c-6fe2-441c-8c8c-71466251a162
target-sh4: r2d --append option support
Remove qemu_ram_alloc(SDRAM_BASE) and related changes.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6919 c046a42c-6fe2-441c-8c8c-71466251a162
Add linux kernel command line ("--append" option) support.Fix kernel loading address to appropriate position when --append used.Using --kernel but --append case is left untouched for backward compatibility.
This also change the host<->SH address mapping for r2d to...
sh4: r2d fix no ide/net case
Fix invalid access/crash when there is no IDE device or NET device.
Signed-off-by: Takashi YOSHII <takasi-y@ops.dti.ne.jp>Tested-by: Shin-ichiro KAWASAKI <kawasaki@juno.dti.ne.jp>Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>...
hw: remove error handling from qemu_malloc() callers (Avi Kivity)
Signed-off-by: Avi Kivity <avi@redhat.com>Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6529 c046a42c-6fe2-441c-8c8c-71466251a162
sh4: r2d. Endian conversion for peripheral register initialization.
Add endian conversion to hw/r2d.c which lacks consideration of endian onsetting BSC registers.
Signed-off-by: Takashi YOSHII <takasi-y@ops.dti.ne.jp>Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>...
graphical_console_init change (Stefano Stabellini)
Patch 5/7
This patch changes the graphical_console_init function to return anallocated DisplayState instead of a QEMUConsole.
This patch contains just the graphical_console_init change and few othermodifications mainly in console.c and vl.c....
Make pci_nic_init() use qemu_setup_nic_model() (Mark McLoughlin)
Add a table of PCI NIC models to pass to qemu_setup_nic_model().
While we're at it, also add a corresponding table of NIC initfunctions.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>...
SH4: kill a few warnings
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5938 c046a42c-6fe2-441c-8c8c-71466251a162
SH: r2d pci support (Takashi YOSHII).
This patch adds pci support to sh/r2d board.This is the first user of PCIC support I formerly sent.
PCIC actually is inside of chip with CPU core on SH7751.But, this code is written as if SH7750 and PCIC are on board....
sh4: Add r2d onboard FPGA IRQ controller (Takashi YOSHII).
This adds IRQ controller in FPGA on r2d, and use it for CF.
Signed-off-by: Takashi YOSHII <takasi-y@ops.dti.ne.jp>Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5926 c046a42c-6fe2-441c-8c8c-71466251a162
sh4: mmio based CF support on r2d board (Takashi YOSHII).
This patch adds emulation for a CompactFlash on sh4/r2d board. The device is CF, but wired to be worked as True-IDE mode, and connected directly to SH bus. So, this code is to support generally mmio based...
Change MMIO callbacks to use offsets, not absolute addresses.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5849 c046a42c-6fe2-441c-8c8c-71466251a162
SM501 emulation for R2D-SH4
This patch adds minimum emulation of SM501 multifunction device,whose main feature is 2D graphics. It is one of the peripheralof R2D, the SH4 evaluation board. We can see TUX printed on theQEMU console.
Signed-off-by: Shin-ichiro KAWASAKI <kawasaki@juno.dti.ne.jp>...
Set default max_cpus to one.
Clean-up machine definitions.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5566 c046a42c-6fe2-441c-8c8c-71466251a162
machine struct - specify max_cpus at the per machine level (Jes Sorensen)
Introduce a max_cpus per-machine variable, allowing individual boardsto limit it's number of CPUs. Check requested number of CPUs in setupcode and exit if it exceeds the supported number for the machine....
machine struct - use C99 initializers (Jes Sorensen)
Modify all the machine struct declarations to use C99 initializers.This patch has no functional changes.
Signed-off-by: Jes Sorensen <jes@sgi.com>Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>...
SH4: R2D-PLUS FPGA: simply unassigned memory triggering
Use NULL to trigger unassigned memory error on 32-bit accesses insteadof assert(0) as suggested by Blue Swirl.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5141 c046a42c-6fe2-441c-8c8c-71466251a162
sh4: Add R2D-PLUS FPGA support.
This adds trivial support for the R2D-PLUS FPGA, mostly just for theversioning information that the kernel uses for IRL mappings, in additionto handling the heartbeat and poweroff writes.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>...
sh4: CPU versioning.
Trivial patch adding CPU listing and the ability to do per-subtypeCVR/PVR/PRR values. Presently SH7750R and SH7751R definitions areprovided, as these are the ones in present use in-tree.
The CVR value for SH7751R is intentionally restricted so the kernel...
Use correct types to enable > 2G support, based on a patch fromAnthony Liguori.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4265 c046a42c-6fe2-441c-8c8c-71466251a162
RAM usage information in machine definition.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4246 c046a42c-6fe2-441c-8c8c-71466251a162
Revert "Use correct types to enable > 2G support" (r4238), it isnot yet ready.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4240 c046a42c-6fe2-441c-8c8c-71466251a162
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4238 c046a42c-6fe2-441c-8c8c-71466251a162
Remove unused parameters from QEMUMachineInitFunc (Laurent Vivier)
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3687 c046a42c-6fe2-441c-8c8c-71466251a162
Break up vl.h.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3674 c046a42c-6fe2-441c-8c8c-71466251a162
added cpu_model parameter to cpu_init()
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3562 c046a42c-6fe2-441c-8c8c-71466251a162
Set boot sequence from command line (Dan Kenigsberg).
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3497 c046a42c-6fe2-441c-8c8c-71466251a162
Remove unused variable.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3285 c046a42c-6fe2-441c-8c8c-71466251a162
Add R2D-PLUS support, by Magnus Damm.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3268 c046a42c-6fe2-441c-8c8c-71466251a162