Split out common pcnet code
The core pcnet emulation code is used by both the PCI "pcnet" deviceand the SPARC "lance" device. Split the common code frm the PCI code sothat that can be configures independantly.
Signed-off-by: Paul Brook <paul@codesourcery.com>
Remove PCI from sparc32 target
None of the (current) sparc32 machines have a PCI bus, so remove the PCIcode from these configs.
Fix previous commit
Fix breakage from previous commit (missing pci.mak, and incorrectinclude in default-configs/s390x-softmmu.mak).
PCI config include
Split PCI config options into a separate file
VirtIO config option
Make virtio devices optional. Selecting individual devices is not usefulas the host bindings are all in one file.
powerpc: Add a virtex5 ml507 refdesign board
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>Signed-off-by: Alexander Graf <agraf@suse.de>
piix4: compile only once
Compile piix4 in hwlib. Two compilations less for the full build.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
MIPS: Initial support of VIA IDE controller used by fulong mini pc
Signed-off-by: Huacai Chen <zltjiangshi@gmail.com>Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
MIPS: Initial support of bonito north bridge used by fulong mini pc
Compile dma only once
Use a qemu_irq to request CPU exit.
7 compilations less for the full build.
Compile pckbd only once
Use a qemu_irq to indicate A20 line changes. Move I/O port 92to pckbd.c.
Compile acpi_piix4, apm and pm_smbus only once
12 compilations less for the full build.
sparc32 use empty_slot for missing RAM v1
use empty_slot device for the RAM which is not installed
Models without ECC don't trap when missing ram is accessed.
v0->v1 compile only once and fix indentation
Signed-off-by: Artyom Tarasenko <atar4qemu@gmail.com>...
sh_pci: fix memory and I/O access
Since commit 8da3ff180974732fc4272cb4433fef85c1822961 ("MMIO callbackinterface changes"), the addresses passed to the I/O functions are anoffset to the start of the area. As a consequence, there is no need tocorrect the address using the value of IOBR. This make possible the use...
hw/r2d: add flash memory
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
OHCI qdev conversion
Convert remaining OHCI devices to QDEV interface.
Compile most PPC devices only once
Make byte swapping unconditional since PPC is big endian.
Compile prep_pci only once
Compile openpic only once
Replace TARGET_PAGE_SIZE with 4096. Make byte swapping unconditionalsince PPC is big endian.
Compile ide/macio only once
Compile pflash_cfi01 only once
Push TARGET_WORDS_BIGENDIAN dependency to board level.
Compile pflash_cfi02 only once
Compile acpi only once
Use qemu_irqs to trigger CMOS S3 and SMI events.
Avoid using kvm.h, which uses CPUState.
Compile vmware_vga only once
Compile some MIPS devices only once
Move CPU specific declarations to a separate file.
Compile ide/core only once
Make win2k install hack unconditional as it is still restricted tox86 only in vl.c.
Replace TARGET_PAGE_SIZE and 4096 with PAGE_SIZE.
target-s390: Don't compile in virtio-pci
As soon as virtio-pci.c gets compiled and used on S390 the internal qdev magicgets confused and tries to give us PCI devices instead of S390 virtio devices.
Since we don't have PCI on S390, we can safely not compile virtio-pci at all....
Compile sound devices only once
Compile serial only once
Compile ne2000_isa only once
Compile fdc only once
Compile most IDE devices only once
Compile usb-uhci only once
Compile vga-isa only once
Compile i8254 only once
Compile pcspk only once
Compile parallel only once
Compile vga-pci only once
Build usb-ohci for PCs
The OHCI emulation isn't obviously broken and there are people who want to useit. Let's build it by default so that it can be enabled via -device.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
ARM defconfig fix
Tix typo in default-configs/arm-softmmu.mak
Add support for S390x system emulation
Let's enable the basics for system emulation so we can run virtual machineswith KVM!
Signed-off-by: Alexander Graf <agraf@suse.de>Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
DS1338 RTC
Implement MAXIM SD1338 RTC+NVRAM.
Built network devices once
Move some generic NICS into libhw, and build them for ARM targets.
Only compile sd0323 when one target uses it
Patchworks-ID: 35217Signed-off-by: Juan Quintela <quintela@redhat.com>Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Only compile ads7846 when one target uses it
Patchworks-ID: 35218Signed-off-by: Juan Quintela <quintela@redhat.com>Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Only compile max111x when one target uses it
Patchworks-ID: 35219Signed-off-by: Juan Quintela <quintela@redhat.com>Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Only compile ssi-sd when one target uses it
Patchworks-ID: 35220Signed-off-by: Juan Quintela <quintela@redhat.com>Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Only compile ssi when one target uses it
Patchworks-ID: 35221Signed-off-by: Juan Quintela <quintela@redhat.com>Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Only compile tmp105 when one target uses it
Patchworks-ID: 35214Signed-off-by: Juan Quintela <quintela@redhat.com>Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Only compile stellaris_input when one target uses it
Patchworks-ID: 35213Signed-off-by: Juan Quintela <quintela@redhat.com>Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Only compile sd0303 when one target uses it
Patchworks-ID: 35216Signed-off-by: Juan Quintela <quintela@redhat.com>Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Only compile twl92230 when one target uses it
Patchworks-ID: 35212Signed-off-by: Juan Quintela <quintela@redhat.com>Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Only compile tsc2005 when one target uses it
Patchworks-ID: 35215Signed-off-by: Juan Quintela <quintela@redhat.com>Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Only compile lm832x when one target uses it
Patchworks-ID: 35211Signed-off-by: Juan Quintela <quintela@redhat.com>Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Only compile wm8750 when one target uses it
Patchworks-ID: 35209Signed-off-by: Juan Quintela <quintela@redhat.com>Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Only compile ptimer when one target uses it
Patchworks-ID: 35207Signed-off-by: Juan Quintela <quintela@redhat.com>Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Only compile sd when one target uses it
Patchworks-ID: 35208Signed-off-by: Juan Quintela <quintela@redhat.com>Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Only compile max7310 when one target uses it
Patchworks-ID: 35210Signed-off-by: Juan Quintela <quintela@redhat.com>Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Only compile ecc when one target uses it
Patchworks-ID: 35203Signed-off-by: Juan Quintela <quintela@redhat.com>Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Only compile esp when one target uses it
Patchworks-ID: 35206Signed-off-by: Juan Quintela <quintela@redhat.com>Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Only compile escc when one target uses it
Patchworks-ID: 35205Signed-off-by: Juan Quintela <quintela@redhat.com>Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Only compile m48t59 when one target uses it
Patchworks-ID: 35204Signed-off-by: Juan Quintela <quintela@redhat.com>Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Generate gdbstub-xml.c only when needed
First user of new config-devices.mak
Patchworks-ID: 35198Signed-off-by: Juan Quintela <quintela@redhat.com>Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Only compile usb_ohci when one target uses it
Patchworks-ID: 35199Signed-off-by: Juan Quintela <quintela@redhat.com>Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Only compile isa_mmio when one target uses it
Patchworks-ID: 35200Signed-off-by: Juan Quintela <quintela@redhat.com>Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Only compile qdev_addr when one target uses it
Patchworks-ID: 35201Signed-off-by: Juan Quintela <quintela@redhat.com>Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Only compile nand when one target uses it
Patchworks-ID: 35202Signed-off-by: Juan Quintela <quintela@redhat.com>Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Add new config-devices.mak for each target
We generate config-devices.h from there automatically.We need to do it in main Makefile, because we are going to need a mainMakefile for them.
Patchworks-ID: 35196Signed-off-by: Juan Quintela <quintela@redhat.com>...