Archipelago » qemu

/*

 * Cortex-A9MPCore internal peripheral emulation.

 *

 * Copyright (c) 2009 CodeSourcery.

 * Copyright (c) 2011 Linaro Limited.

 * Written by Paul Brook, Peter Maydell.

 *

 * This code is licensed under the GPL.

 */

#include "sysbus.h"

/* A9MP private memory region.  */

typedef struct a9mp_priv_state {

    SysBusDevice busdev;

    uint32_t scu_control;

    uint32_t scu_status;

    uint32_t old_timer_status[8];

    uint32_t num_cpu;

    MemoryRegion scu_iomem;

    MemoryRegion ptimer_iomem;

    MemoryRegion container;

    DeviceState *mptimer;

    DeviceState *gic;

    uint32_t num_irq;

} a9mp_priv_state;

static uint64_t a9_scu_read(void *opaque, hwaddr offset,

                            unsigned size)

{

    a9mp_priv_state *s = (a9mp_priv_state *)opaque;

    switch (offset) {

    case 0x00: /* Control */

        return s->scu_control;

    case 0x04: /* Configuration */

        return (((1 << s->num_cpu) - 1) << 4) | (s->num_cpu - 1);

    case 0x08: /* CPU Power Status */

        return s->scu_status;

    case 0x09: /* CPU status.  */

        return s->scu_status >> 8;

    case 0x0a: /* CPU status.  */

        return s->scu_status >> 16;

    case 0x0b: /* CPU status.  */

        return s->scu_status >> 24;

    case 0x0c: /* Invalidate All Registers In Secure State */

        return 0;

    case 0x40: /* Filtering Start Address Register */

    case 0x44: /* Filtering End Address Register */

        /* RAZ/WI, like an implementation with only one AXI master */

        return 0;

    case 0x50: /* SCU Access Control Register */

    case 0x54: /* SCU Non-secure Access Control Register */

        /* unimplemented, fall through */

    default:

        return 0;

    }

}

static void a9_scu_write(void *opaque, hwaddr offset,

                         uint64_t value, unsigned size)

{

    a9mp_priv_state *s = (a9mp_priv_state *)opaque;

    uint32_t mask;

    uint32_t shift;

    switch (size) {

    case 1:

        mask = 0xff;

        break;

    case 2:

        mask = 0xffff;

        break;

    case 4:

        mask = 0xffffffff;

        break;

    default:

        fprintf(stderr, "Invalid size %u in write to a9 scu register %x\n",

                size, (unsigned)offset);

        return;

    }

    switch (offset) {

    case 0x00: /* Control */

        s->scu_control = value & 1;

        break;

    case 0x4: /* Configuration: RO */

        break;

    case 0x08: case 0x09: case 0x0A: case 0x0B: /* Power Control */

        shift = (offset - 0x8) * 8;

        s->scu_status &= ~(mask << shift);

        s->scu_status |= ((value & mask) << shift);

        break;

    case 0x0c: /* Invalidate All Registers In Secure State */

        /* no-op as we do not implement caches */

        break;

    case 0x40: /* Filtering Start Address Register */

    case 0x44: /* Filtering End Address Register */

        /* RAZ/WI, like an implementation with only one AXI master */

        break;

    case 0x50: /* SCU Access Control Register */

    case 0x54: /* SCU Non-secure Access Control Register */

        /* unimplemented, fall through */

    default:

        break;

    }

}

static const MemoryRegionOps a9_scu_ops = {

    .read = a9_scu_read,

    .write = a9_scu_write,

    .endianness = DEVICE_NATIVE_ENDIAN,

};

static void a9mp_priv_reset(DeviceState *dev)

{

    a9mp_priv_state *s = FROM_SYSBUS(a9mp_priv_state, sysbus_from_qdev(dev));

    int i;

    s->scu_control = 0;

    for (i = 0; i < ARRAY_SIZE(s->old_timer_status); i++) {

        s->old_timer_status[i] = 0;

    }

}

static void a9mp_priv_set_irq(void *opaque, int irq, int level)

{

    a9mp_priv_state *s = (a9mp_priv_state *)opaque;

    qemu_set_irq(qdev_get_gpio_in(s->gic, irq), level);

}

static int a9mp_priv_init(SysBusDevice *dev)

{

    a9mp_priv_state *s = FROM_SYSBUS(a9mp_priv_state, dev);

    SysBusDevice *busdev, *gicbusdev;

    int i;

    s->gic = qdev_create(NULL, "arm_gic");

    qdev_prop_set_uint32(s->gic, "num-cpu", s->num_cpu);

    qdev_prop_set_uint32(s->gic, "num-irq", s->num_irq);

    qdev_init_nofail(s->gic);

    gicbusdev = sysbus_from_qdev(s->gic);

    /* Pass through outbound IRQ lines from the GIC */

    sysbus_pass_irq(dev, gicbusdev);

    /* Pass through inbound GPIO lines to the GIC */

    qdev_init_gpio_in(&s->busdev.qdev, a9mp_priv_set_irq, s->num_irq - 32);

    s->mptimer = qdev_create(NULL, "arm_mptimer");

    qdev_prop_set_uint32(s->mptimer, "num-cpu", s->num_cpu);

    qdev_init_nofail(s->mptimer);

    busdev = sysbus_from_qdev(s->mptimer);

    /* Memory map (addresses are offsets from PERIPHBASE):

     *  0x0000-0x00ff -- Snoop Control Unit

     *  0x0100-0x01ff -- GIC CPU interface

     *  0x0200-0x02ff -- Global Timer

     *  0x0300-0x05ff -- nothing

     *  0x0600-0x06ff -- private timers and watchdogs

     *  0x0700-0x0fff -- nothing

     *  0x1000-0x1fff -- GIC Distributor

     *

     * We should implement the global timer but don't currently do so.

     */

    memory_region_init(&s->container, "a9mp-priv-container", 0x2000);

    memory_region_init_io(&s->scu_iomem, &a9_scu_ops, s, "a9mp-scu", 0x100);

    memory_region_add_subregion(&s->container, 0, &s->scu_iomem);

    /* GIC CPU interface */

    memory_region_add_subregion(&s->container, 0x100,

                                sysbus_mmio_get_region(gicbusdev, 1));

    /* Note that the A9 exposes only the "timer/watchdog for this core"

     * memory region, not the "timer/watchdog for core X" ones 11MPcore has.

     */

    memory_region_add_subregion(&s->container, 0x600,

                                sysbus_mmio_get_region(busdev, 0));

    memory_region_add_subregion(&s->container, 0x620,

                                sysbus_mmio_get_region(busdev, 1));

    memory_region_add_subregion(&s->container, 0x1000,

                                sysbus_mmio_get_region(gicbusdev, 0));

    sysbus_init_mmio(dev, &s->container);

    /* Wire up the interrupt from each watchdog and timer.

     * For each core the timer is PPI 29 and the watchdog PPI 30.

     */

    for (i = 0; i < s->num_cpu; i++) {

        int ppibase = (s->num_irq - 32) + i * 32;

        sysbus_connect_irq(busdev, i * 2,

                           qdev_get_gpio_in(s->gic, ppibase + 29));

        sysbus_connect_irq(busdev, i * 2 + 1,

                           qdev_get_gpio_in(s->gic, ppibase + 30));

    }

    return 0;

}

static const VMStateDescription vmstate_a9mp_priv = {

    .name = "a9mpcore_priv",

    .version_id = 2,

    .minimum_version_id = 1,

    .fields = (VMStateField[]) {

        VMSTATE_UINT32(scu_control, a9mp_priv_state),

        VMSTATE_UINT32_ARRAY(old_timer_status, a9mp_priv_state, 8),

        VMSTATE_UINT32_V(scu_status, a9mp_priv_state, 2),

        VMSTATE_END_OF_LIST()

    }

};

static Property a9mp_priv_properties[] = {

    DEFINE_PROP_UINT32("num-cpu", a9mp_priv_state, num_cpu, 1),

    /* The Cortex-A9MP may have anything from 0 to 224 external interrupt

     * IRQ lines (with another 32 internal). We default to 64+32, which

     * is the number provided by the Cortex-A9MP test chip in the

     * Realview PBX-A9 and Versatile Express A9 development boards.

     * Other boards may differ and should set this property appropriately.

     */

    DEFINE_PROP_UINT32("num-irq", a9mp_priv_state, num_irq, 96),

    DEFINE_PROP_END_OF_LIST(),

};

static void a9mp_priv_class_init(ObjectClass *klass, void *data)

{

    DeviceClass *dc = DEVICE_CLASS(klass);

    SysBusDeviceClass *k = SYS_BUS_DEVICE_CLASS(klass);

    k->init = a9mp_priv_init;

    dc->props = a9mp_priv_properties;

    dc->vmsd = &vmstate_a9mp_priv;

    dc->reset = a9mp_priv_reset;

}

static TypeInfo a9mp_priv_info = {

    .name          = "a9mpcore_priv",

    .parent        = TYPE_SYS_BUS_DEVICE,

    .instance_size = sizeof(a9mp_priv_state),

    .class_init    = a9mp_priv_class_init,

};

static void a9mp_register_types(void)

{

    type_register_static(&a9mp_priv_info);

}

type_init(a9mp_register_types)