Statistics
| Branch: | Revision:

root / hw / Makefile.objs @ a8aec295

History | View | Annotate | Download (1.2 kB)

# Date Author Comment
e9cd423f 04/19/2013 05:18 pm Paolo Bonzini

virtio: simplify Makefile conditionals

Signed-off-by: Paolo Bonzini <>

bdee56f5 04/15/2013 07:19 pm Paolo Bonzini

tpm: reorganize headers and split hardware part

The TPM subsystem does not have a full front-end/back-end separation.
The sole available backend, tpm_passthrough, depends on the data
structures of the sole available frontend, tpm_tis.

However, we can at least try to split the user interface (tpm.c) from the...

c0907c9e 04/08/2013 07:13 pm Paolo Bonzini

hw: move PCI bridges to hw/pci-* or hw/ARCH

Signed-off-by: Paolo Bonzini <>

ba25df88 04/08/2013 07:13 pm Paolo Bonzini

hw: move VFIO and ivshmem to hw/misc/

Signed-off-by: Paolo Bonzini <>

fc97bb5b 04/08/2013 07:13 pm Paolo Bonzini

hw: move display devices to hw/display/, configure via default-configs/

Signed-off-by: Paolo Bonzini <>

49ab747f 04/08/2013 07:13 pm Paolo Bonzini

hw: move target-independent files to subdirectories

This patch tackles all files that are compiled once, moving
them to subdirectories of hw/.

Signed-off-by: Paolo Bonzini <>

6e790746 04/08/2013 07:13 pm Paolo Bonzini

hw: move virtio devices to hw/ subdirectories

Signed-off-by: Paolo Bonzini <>

1fd6bb44 04/08/2013 07:13 pm Paolo Bonzini

hw: make subdirectories for devices

Prepare the new directory structure.

Signed-off-by: Paolo Bonzini <>

e263cd49 03/25/2013 12:13 pm Dmitry Fleytman

Packet abstraction for VMWARE network devices

Signed-off-by: Dmitry Fleytman <>
Signed-off-by: Yan Vugenfirer <>
Signed-off-by: Stefan Hajnoczi <>

786fd2b0 03/25/2013 12:13 pm Dmitry Fleytman

VMXNET3 device implementation

Signed-off-by: Dmitry Fleytman <>
Signed-off-by: Yan Vugenfirer <>
Signed-off-by: Stefan Hajnoczi <>

06a1cea5 03/15/2013 06:41 pm Peter Crosthwaite

pl330: Initial version

Device model for Primecell PL330 DMA controller.

Signed-off-by: Peter Crosthwaite <>
Signed-off-by: Kirill Batuzov <>
Tested-by: Igor Mitsyanko <>
Reviewed-by: Igor Mitsyanko <>...

53018216 03/01/2013 04:01 pm Paolo Bonzini

hw: move boards and other isolated files to hw/ARCH

Signed-off-by: Paolo Bonzini <>

1559e0d4 03/01/2013 02:57 pm Paolo Bonzini

hw: move device-hotplug.o to toplevel, compile it once

The situation with device-hotplug.c is similar to qdev-monitor.c.
Add a stub for pci_drive_hot_add, so that it can be compiled once,
and move it out of hw/.

Signed-off-by: Paolo Bonzini <>

b4a42f81 03/01/2013 02:54 pm Paolo Bonzini

hw: move qdev-monitor.o to toplevel directory

qdev-monitor.c is the only "core qdev" file that is not used in
user-mode emulation, and it does not define anything that is used
by hardware models. Remove it from the hw/ directory and
remove hw/qdev-monitor.h from hw/qdev.h too; this requires...

fd7f0d66 03/01/2013 02:53 pm Paolo Bonzini

hw: move fifo.[ch] to libqemuutil

fifo.c is generic code that can be easily unit tested. So it
belongs in libqemuutil.

Signed-off-by: Paolo Bonzini <>

159b6e9f 03/01/2013 02:18 pm Paolo Bonzini

hw: move char backends to backends/

Braille and msmouse support is in hw/, but it is not hardware.
Move it to the backends/ directory.

Signed-off-by: Paolo Bonzini <>

d7dfca08 02/28/2013 08:23 pm Igor Mitsyanko

hw/sdhci: introduce standard SD host controller

Device model for standard SD Host Controller Interface (SDHCI) compliant with
version 2.00 of SD association specification.

Signed-off-by: Peter Crosthwaite <>
Signed-off-by: Igor Mitsyanko <>...

07d17e77 02/19/2013 01:30 pm Gerd Hoffmann

allow disabling usb smartcard support

Signed-off-by: Gerd Hoffmann <>

82cb6b04 01/26/2013 03:15 pm Paolo Bonzini

build: remove extra-obj-y

extra-obj-y is somewhat complicated to understand. Replace it with a
special CONFIG_ALL symbol that is defined only at toplevel.
This limits the case of directories defining more than one
*-obj-y target.

Signed-off-by: Paolo Bonzini <>...

00082344 01/26/2013 03:15 pm Paolo Bonzini

build: remove universal-obj-y

All of universal-obj-y, user-obj-y (right now unused) and common-obj-y can
be unified into common-obj-y if we take care of defining CONFIG_SOFTMMU
and CONFIG_USER_ONLY in the toplevel makefile. This is similar to how
we define symbols for hardware components....

ff8eca55 01/21/2013 09:23 pm KONRAD Frederic

virtio-bus: introduce virtio-bus

Introduce virtio-bus. Refactored transport device will create a bus which
extends virtio-bus.

Signed-off-by: KONRAD Frederic <>

Reviewed-by: Peter Maydell <>
Signed-off-by: Anthony Liguori <>

9c16fa79 01/14/2013 09:26 pm Alberto Garcia

Add TEWS TPCI200 IndustryPack emulation

The TPCI200 is a PCI board that supports up to 4 IndustryPack modules.

A new bus type called 'IndustryPack' has been created so any
compatible module can be attached to this board.

Reviewed-by: Andreas Färber <>...

be657dea 01/14/2013 09:26 pm Alberto Garcia

Add GE IP-Octal 232 IndustryPack emulation

The GE IP-Octal 232 is an IndustryPack module that implements eight
RS-232 serial ports, each one of which can be redirected to a
character device in the host.

Signed-off-by: Alberto Garcia <>...

9444e9e6 01/12/2013 07:42 pm Paolo Bonzini

build: consolidate multiple variables into universal-obj-y

The directory descent mechanism, and a less-flat tree both helped
in making some *-obj-y definitions very short. Many of these
often end up in universal-obj-y, and used to be separate only
because of libuser (which is now part of history...)....

afd347ab 01/12/2013 06:19 pm Paolo Bonzini

build: remove CONFIG_SMARTCARD

The passthru smartcard does not have the shared library dependency, build
it unconditionally.

Signed-off-by: Paolo Bonzini <>

63e3555e 01/10/2013 10:52 pm Andreas Färber

Merge branch 'master' of git://git.qemu.org/qemu into prep-up

Conflicts:
hw/Makefile.objs
hw/ppc_prep.c

Signed-off-by: Andreas Färber <>

507066f8 01/08/2013 10:03 pm Eduardo Habkost

qdev: Include qdev code into *-user, too

The code depends on some functions from qemu-option.o, so add
qemu-option.o to universal-obj-y to make sure it's included.

Signed-off-by: Eduardo Habkost <>
Signed-off-by: Andreas Färber <>

ef4929fb 01/03/2013 03:13 pm Stefan Hajnoczi

dataplane: use linux-headers/ for virtio includes

The hw/dataplane/vring.c code includes linux/virtio_ring.h. Ensure that
we use linux-headers/ instead of the system-wide headers, which may be
out-of-date on older distros.

This resolves the following build error on Debian 6:...

185ecf40 01/02/2013 04:50 pm Stefan Hajnoczi

dataplane: add host memory mapping code

The data plane thread needs to map guest physical addresses to host
pointers. Normally this is done with cpu_physical_memory_map() but the
function assumes the global mutex is held. The data plane thread does
not touch the global mutex and therefore needs a thread-safe memory...

501a7ce7 12/23/2012 01:40 am Andreas Färber

Merge branch 'master' of git://git.qemu.org/qemu into qom-cpu

Adapt header include paths.

Signed-off-by: Andreas Färber <>

a404b612 12/19/2012 03:09 pm Eduardo Habkost

qdev-properties.c: Separate core from the code used only by qemu-system-*

This separates the qdev properties code in two parts:
- qdev-properties.c, that contains most of the qdev properties code;
- qdev-properties-system.c for code specific for qemu-system-*,...

525877c9 12/19/2012 09:29 am Paolo Bonzini

build: move rules from Makefile to */Makefile.objs

Signed-off-by: Paolo Bonzini <>

6f991980 12/17/2012 07:56 pm Paolo Bonzini

Merge commit '1dd3a74d2ee2d873cde0b390b536e45420b3fe05' into HEAD

Signed-off-by: Paolo Bonzini <>

315a1350 12/17/2012 01:02 pm Michael S. Tsirkin

pci: move pci core code to hw/pci

Move files and modify makefiles to pick them at the
new location.

Signed-off-by: Michael S. Tsirkin <>

a1c93046 11/26/2012 05:35 pm Jason Baron

ich9: Add i82801b11 dmi-to-pci bridge

Add the dmi-to-pci i82801b11 bridge chip. This is the pci bridge chip
that q35 uses on its host bus for PCI bus arbitration.

Signed-off-by: Isaku Yamahata <>
Signed-off-by: Jason Baron <>...

678e7b94 11/26/2012 05:35 pm Jason Baron

ich9: Add smbus

Add support for the ich9 smbus chip.

Signed-off-by: Isaku Yamahata <>
Signed-off-by: Jason Baron <>
Signed-off-by: Anthony Liguori <>

410edd92 11/26/2012 05:35 pm Isaku Yamahata

pc/piix_pci: factor out smram/pam logic

Factor out smram/pam logic for use by other chipsets, namely q35
at this point.

Note: Should be factored out into a generic North Bridge Class.

[: changes for updated memory API]
Signed-off-by: Isaku Yamahata <>...

e516572f 11/26/2012 05:35 pm Jason Baron

ich9: Add acpi support and definitions

Lay the groundwork for subsequent ich9 support.

Signed-off-by: Isaku Yamahata <>
Signed-off-by: Jason Baron <>
Signed-off-by: Anthony Liguori <>

16c915ba 11/16/2012 04:36 pm Amit Shah

virtio-rng: hardware random number generator device

The Linux kernel already has a virtio-rng driver, this is the device
implementation.

When the guest asks for entropy from the virtio hwrng, it puts a buffer
in the vq. We then put entropy into that buffer, and push it back to...

488cb996 10/22/2012 09:26 pm Gerd Hoffmann

serial: split serial.c

Split serial.c into serial.c, serial.h and serial-isa.c. While being at
creating a serial.h header file move the serial prototypes from pc.h to
the new serial.h. The latter leads to s/pc.h/serial.h/ in tons of
boards which just want the serial bits from pc.h...

419ad672 10/22/2012 09:26 pm Gerd Hoffmann

serial: add pci variant

So we get a hot-pluggable 16550 uart.

Signed-off-by: Gerd Hoffmann <>
Signed-off-by: Anthony Liguori <>

a3578d4a 10/10/2012 04:13 am Peter A. G. Crosthwaite

hw: Added generic FIFO API.

Added a FIFO API that can be used to create and operate byte FIFOs.

Signed-off-by: Peter A. G. Crosthwaite <>

82a24990 10/10/2012 04:13 am Peter A. G. Crosthwaite

m25p80: Initial implementation of SPI flash device

Added device model for m25p80 style SPI flash family.

Signed-off-by: Peter A. G. Crosthwaite <>

c9159fe9 10/06/2012 12:07 am Stefan Weil

Remove libhw

The entries for libhw* are no longer needed in .gitignore.

There is also no longer a difference between common-obj-y and
hw-obj-y, so one of those two macros is sufficient.

Signed-off-by: Stefan Weil <>
Signed-off-by: Anthony Liguori <>

92e1fb5e 10/01/2012 04:04 pm Alex Williamson

vfio: Enable vfio-pci and mark supported

Enabled for all softmmu guests supporting PCI on Linux hosts. Note
that currently only x86 hosts have the kernel side VFIO IOMMU support
for this. PPC (g3beige) is the only non-x86 guest known to work.
ARM (veratile) hangs in firmware, others untested....

b4a738bf 08/23/2012 12:29 am Anthony Liguori

boards: add a 'none' machine type to all platforms

This allows any QEMU binary to be executed with:

$QEMU_BINARY -M none -qmp stdio

Without errors from missing options that are required by various boards. This
also provides a mode that we can use in the future to construct machines...

1ae41f44 08/15/2012 11:10 pm Hervé Poussineau

prep: Add pc87312 Super I/O emulation

This provides floppy and IDE controllers as well as serial and parallel
ports. However, dynamic configuration of devices is not yet supported.

Signed-off-by: Hervé Poussineau <>
[AF: QOM'ify, split out header, create CharDriverState if absent]...

58f9b98f 08/13/2012 06:13 pm Andreas Färber

arm: Move some ARM devices into libhw

Avoids some unnecessary dependencies on cpu.h and prepares for
a future armeb-softmmu where most machines would not be built.

Defer touching the SoC devices since most have implicit or explicit
dependencies on the CPU....

669b4983 08/13/2012 12:20 pm Peter A. G. Crosthwaite

xilinx_axi*: Re-implemented interconnect

Re-implemented the interconnect between the Xilinx AXI ethernet and DMA
controllers. A QOM interface "stream" is created, for the two stream interfaces.

As per Edgars request, this is designed to be more generic than AXI-stream,...

f716c197 08/11/2012 12:37 pm Guan Xuetao

unicore32-softmmu: Add puv3 pm support

This patch adds puv3 pm (power management) support,
include pm device simulation for kernel booting.
Thank Blue Swirl for pointing out the missing "break".

v1->v2: Add initialization to ret in puv3_pm_read.

Signed-off-by: Guan Xuetao <>...

1ea34899 08/11/2012 12:37 pm Guan Xuetao

unicore32-softmmu: Add puv3 dma support

This patch adds puv3 dma (Direct Memory Access) support,
include dma device simulation for kernel booting.

v1->v2: Add initialization to ret in puv3_dma_read.

Signed-off-by: Guan Xuetao <>
Signed-off-by: Blue Swirl <>

56d07a90 08/11/2012 12:37 pm Guan Xuetao

unicore32-softmmu: Add puv3 ostimer support

This patch adds puv3 ostimer support, include os timer
device simulation and ptimer support in puv3 machine.

Signed-off-by: Guan Xuetao <>
Signed-off-by: Blue Swirl <>

a89d01c1 08/11/2012 12:37 pm Guan Xuetao

unicore32-softmmu: Add puv3 gpio support

This patch adds puv3 gpio (General Purpose Input/Output) support,
include gpio device simulation and its interrupt support.

v1->v2: Add initialization to ret in puv3_gpio_read.

Signed-off-by: Guan Xuetao <>...

5c8556a6 08/11/2012 12:36 pm Guan Xuetao

unicore32-softmmu: Add puv3 interrupt support

This patch adds puv3 interrupt support, include interrupt controler
device simulation and interrupt handler in puv3 machine.

Signed-off-by: Guan Xuetao <>
Signed-off-by: Blue Swirl <>

aebcf56f 08/09/2012 09:21 pm Hervé Poussineau

esp: move PCI emulation to a new file esp-pci.c

sparc machines loose ability to instanciate PCI ESP SCSI adapter,
which is not a big loose as they don't have PCI bus support.

Signed-off-by: Hervé Poussineau <>
Signed-off-by: Blue Swirl <>

911525db 07/17/2012 05:48 pm Markus Armbruster

hw/block-common: Factor out fall back to legacy -drive serial=...

Signed-off-by: Markus Armbruster <>
Signed-off-by: Kevin Wolf <>

9db1c0f7 07/17/2012 05:48 pm Markus Armbruster

hd-geometry: Move disk geometry guessing back from block.c

Commit f3d54fc4 factored it out of hw/ide.c for reuse. Sensible,
except it was put into block.c. Device-specific functionality should
be kept in device code, not the block layer. Move it to
hw/hd-geometry.c, and make stylistic changes required to keep...

e8f943c3 07/02/2012 12:11 pm Hannes Reinecke

megasas: LSI Megaraid SAS HBA emulation

This patch adds an emulation for the LSI Megaraid SAS 8708EM2 HBA.
I've tested it to work with Linux, Windows Vista, and Windows7.

Signed-off-by: Hannes Reinecke <>
[ Squashed trivial changes from Andreas Faerber, rebased over IOMMU...

07f9fd48 06/15/2012 01:44 pm Andreas Färber

xilinx_axi*: Share devices between microblaze and microblazeel

Speeds up the build.

Signed-off-by: Andreas Färber <>
Signed-off-by: Edgar E. Iglesias <>

9bbfbb61 06/15/2012 01:44 pm Andreas Färber

hw/xilinx_*: Share Xilinx devices between ppc and microblaze

Speeds up the build.

xilinx_ethlite uses tswap32() and is thus target-dependent.

Signed-off-by: Andreas Färber <>
Signed-off-by: Edgar E. Iglesias <>

be1029ec 06/07/2012 10:21 am Paolo Bonzini

build: convert libhw to nested Makefile.objs

After this patch, the libhw* directories will have a hierarchy
that mimics the source tree. This is useful because we do have
a couple of files there that are in the top source directory.

Signed-off-by: Paolo Bonzini <>

c353f261 06/07/2012 10:21 am Paolo Bonzini

build: move per-target hw/ objects to nested Makefile.objs

This completes the move to nested Makefiles for virtio and a few
other files that were not part of obj-TARGET-y, but still were
compiled separately for each target.

Signed-off-by: Paolo Bonzini <>

3d5a3f9a 06/07/2012 10:21 am Paolo Bonzini

build: move target-independent hw/ objects to nested Makefile.objs

This patch starts converting the hw/ directory. Some files in hw/
are compiled once, some twice (32-/64-bit), some once per target.
Each category is moved in a separate patch.

After this patch, the files that are compiled once will show the...