Archipelago » qemu

/*

 * Virtio Support

 *

 * Copyright IBM, Corp. 2007

 *

 * Authors:

 *  Anthony Liguori   <aliguori@us.ibm.com>

 *

 * This work is licensed under the terms of the GNU GPL, version 2.  See

 * the COPYING file in the top-level directory.

 *

 */

#include <inttypes.h>

#include "virtio.h"

#include "sysemu.h"

/* from Linux's linux/virtio_pci.h */

/* A 32-bit r/o bitmask of the features supported by the host */

#define VIRTIO_PCI_HOST_FEATURES        0

/* A 32-bit r/w bitmask of features activated by the guest */

#define VIRTIO_PCI_GUEST_FEATURES       4

/* A 32-bit r/w PFN for the currently selected queue */

#define VIRTIO_PCI_QUEUE_PFN            8

/* A 16-bit r/o queue size for the currently selected queue */

#define VIRTIO_PCI_QUEUE_NUM            12

/* A 16-bit r/w queue selector */

#define VIRTIO_PCI_QUEUE_SEL            14

/* A 16-bit r/w queue notifier */

#define VIRTIO_PCI_QUEUE_NOTIFY         16

/* An 8-bit device status register.  */

#define VIRTIO_PCI_STATUS               18

/* An 8-bit r/o interrupt status register.  Reading the value will return the

 * current contents of the ISR and will also clear it.  This is effectively

 * a read-and-acknowledge. */

#define VIRTIO_PCI_ISR                  19

#define VIRTIO_PCI_CONFIG               20

/* Virtio ABI version, if we increment this, we break the guest driver. */

#define VIRTIO_PCI_ABI_VERSION          0

/* How many bits to shift physical queue address written to QUEUE_PFN.

 * 12 is historical, and due to x86 page size. */

#define VIRTIO_PCI_QUEUE_ADDR_SHIFT    12

/* The alignment to use between consumer and producer parts of vring.

 * x86 pagesize again. */

#define VIRTIO_PCI_VRING_ALIGN         4096

/* QEMU doesn't strictly need write barriers since everything runs in

 * lock-step.  We'll leave the calls to wmb() in though to make it obvious for

 * KVM or if kqemu gets SMP support.

 */

#define wmb() do { } while (0)

typedef struct VRingDesc

{

    uint64_t addr;

    uint32_t len;

    uint16_t flags;

    uint16_t next;

} VRingDesc;

typedef struct VRingAvail

{

    uint16_t flags;

    uint16_t idx;

    uint16_t ring[0];

} VRingAvail;

typedef struct VRingUsedElem

{

    uint32_t id;

    uint32_t len;

} VRingUsedElem;

typedef struct VRingUsed

{

    uint16_t flags;

    uint16_t idx;

    VRingUsedElem ring[0];

} VRingUsed;

typedef struct VRing

{

    unsigned int num;

    target_phys_addr_t desc;

    target_phys_addr_t avail;

    target_phys_addr_t used;

} VRing;

struct VirtQueue

{

    VRing vring;

    uint32_t pfn;

    uint16_t last_avail_idx;

    int inuse;

    void (*handle_output)(VirtIODevice *vdev, VirtQueue *vq);

};

#define VIRTIO_PCI_QUEUE_MAX        16

/* virt queue functions */

static void virtqueue_init(VirtQueue *vq, target_phys_addr_t pa)

{

    vq->vring.desc = pa;

    vq->vring.avail = pa + vq->vring.num * sizeof(VRingDesc);

    vq->vring.used = vring_align(vq->vring.avail +

                                 offsetof(VRingAvail, ring[vq->vring.num]),

                                 VIRTIO_PCI_VRING_ALIGN);

}

static inline uint64_t vring_desc_addr(VirtQueue *vq, int i)

{

    target_phys_addr_t pa;

    pa = vq->vring.desc + sizeof(VRingDesc) * i + offsetof(VRingDesc, addr);

    return ldq_phys(pa);

}

static inline uint32_t vring_desc_len(VirtQueue *vq, int i)

{

    target_phys_addr_t pa;

    pa = vq->vring.desc + sizeof(VRingDesc) * i + offsetof(VRingDesc, len);

    return ldl_phys(pa);

}

static inline uint16_t vring_desc_flags(VirtQueue *vq, int i)

{

    target_phys_addr_t pa;

    pa = vq->vring.desc + sizeof(VRingDesc) * i + offsetof(VRingDesc, flags);

    return lduw_phys(pa);

}

static inline uint16_t vring_desc_next(VirtQueue *vq, int i)

{

    target_phys_addr_t pa;

    pa = vq->vring.desc + sizeof(VRingDesc) * i + offsetof(VRingDesc, next);

    return lduw_phys(pa);

}

static inline uint16_t vring_avail_flags(VirtQueue *vq)

{

    target_phys_addr_t pa;

    pa = vq->vring.avail + offsetof(VRingAvail, flags);

    return lduw_phys(pa);

}

static inline uint16_t vring_avail_idx(VirtQueue *vq)

{

    target_phys_addr_t pa;

    pa = vq->vring.avail + offsetof(VRingAvail, idx);

    return lduw_phys(pa);

}

static inline uint16_t vring_avail_ring(VirtQueue *vq, int i)

{

    target_phys_addr_t pa;

    pa = vq->vring.avail + offsetof(VRingAvail, ring[i]);

    return lduw_phys(pa);

}

static inline void vring_used_ring_id(VirtQueue *vq, int i, uint32_t val)

{

    target_phys_addr_t pa;

    pa = vq->vring.used + offsetof(VRingUsed, ring[i].id);

    stl_phys(pa, val);

}

static inline void vring_used_ring_len(VirtQueue *vq, int i, uint32_t val)

{

    target_phys_addr_t pa;

    pa = vq->vring.used + offsetof(VRingUsed, ring[i].len);

    stl_phys(pa, val);

}

static uint16_t vring_used_idx(VirtQueue *vq)

{

    target_phys_addr_t pa;

    pa = vq->vring.used + offsetof(VRingUsed, idx);

    return lduw_phys(pa);

}

static inline void vring_used_idx_increment(VirtQueue *vq, uint16_t val)

{

    target_phys_addr_t pa;

    pa = vq->vring.used + offsetof(VRingUsed, idx);

    stw_phys(pa, vring_used_idx(vq) + val);

}

static inline void vring_used_flags_set_bit(VirtQueue *vq, int mask)

{

    target_phys_addr_t pa;

    pa = vq->vring.used + offsetof(VRingUsed, flags);

    stw_phys(pa, lduw_phys(pa) | mask);

}

static inline void vring_used_flags_unset_bit(VirtQueue *vq, int mask)

{

    target_phys_addr_t pa;

    pa = vq->vring.used + offsetof(VRingUsed, flags);

    stw_phys(pa, lduw_phys(pa) & ~mask);

}

void virtio_queue_set_notification(VirtQueue *vq, int enable)

{

    if (enable)

        vring_used_flags_unset_bit(vq, VRING_USED_F_NO_NOTIFY);

    else

        vring_used_flags_set_bit(vq, VRING_USED_F_NO_NOTIFY);

}

int virtio_queue_ready(VirtQueue *vq)

{

    return vq->vring.avail != 0;

}

int virtio_queue_empty(VirtQueue *vq)

{

    return vring_avail_idx(vq) == vq->last_avail_idx;

}

void virtqueue_fill(VirtQueue *vq, const VirtQueueElement *elem,

                    unsigned int len, unsigned int idx)

{

    unsigned int offset;

    int i;

    offset = 0;

    for (i = 0; i < elem->in_num; i++) {

        size_t size = MIN(len - offset, elem->in_sg[i].iov_len);

        cpu_physical_memory_unmap(elem->in_sg[i].iov_base,

                                  elem->in_sg[i].iov_len,

                                  1, size);

        offset += elem->in_sg[i].iov_len;

    }

    for (i = 0; i < elem->out_num; i++)

        cpu_physical_memory_unmap(elem->out_sg[i].iov_base,

                                  elem->out_sg[i].iov_len,

                                  0, elem->out_sg[i].iov_len);

    idx = (idx + vring_used_idx(vq)) % vq->vring.num;

    /* Get a pointer to the next entry in the used ring. */

    vring_used_ring_id(vq, idx, elem->index);

    vring_used_ring_len(vq, idx, len);

}

void virtqueue_flush(VirtQueue *vq, unsigned int count)

{

    /* Make sure buffer is written before we update index. */

    wmb();

    vring_used_idx_increment(vq, count);

    vq->inuse -= count;

}

void virtqueue_push(VirtQueue *vq, const VirtQueueElement *elem,

                    unsigned int len)

{

    virtqueue_fill(vq, elem, len, 0);

    virtqueue_flush(vq, 1);

}

static int virtqueue_num_heads(VirtQueue *vq, unsigned int idx)

{

    uint16_t num_heads = vring_avail_idx(vq) - idx;

    /* Check it isn't doing very strange things with descriptor numbers. */

    if (num_heads > vq->vring.num) {

        fprintf(stderr, "Guest moved used index from %u to %u",

                idx, vring_avail_idx(vq));

        exit(1);

    }

    return num_heads;

}

static unsigned int virtqueue_get_head(VirtQueue *vq, unsigned int idx)

{

    unsigned int head;

    /* Grab the next descriptor number they're advertising, and increment

     * the index we've seen. */

    head = vring_avail_ring(vq, idx % vq->vring.num);

    /* If their number is silly, that's a fatal mistake. */

    if (head >= vq->vring.num) {

        fprintf(stderr, "Guest says index %u is available", head);

        exit(1);

    }

    return head;

}

static unsigned virtqueue_next_desc(VirtQueue *vq, unsigned int i)

{

    unsigned int next;

    /* If this descriptor says it doesn't chain, we're done. */

    if (!(vring_desc_flags(vq, i) & VRING_DESC_F_NEXT))

        return vq->vring.num;

    /* Check they're not leading us off end of descriptors. */

    next = vring_desc_next(vq, i);

    /* Make sure compiler knows to grab that: we don't want it changing! */

    wmb();

    if (next >= vq->vring.num) {

        fprintf(stderr, "Desc next is %u", next);

        exit(1);

    }

    return next;

}

int virtqueue_avail_bytes(VirtQueue *vq, int in_bytes, int out_bytes)

{

    unsigned int idx;

    int num_bufs, in_total, out_total;

    idx = vq->last_avail_idx;

    num_bufs = in_total = out_total = 0;

    while (virtqueue_num_heads(vq, idx)) {

        int i;

        i = virtqueue_get_head(vq, idx++);

        do {

            /* If we've got too many, that implies a descriptor loop. */

            if (++num_bufs > vq->vring.num) {

                fprintf(stderr, "Looped descriptor");

                exit(1);

            }

            if (vring_desc_flags(vq, i) & VRING_DESC_F_WRITE) {

                if (in_bytes > 0 &&

                    (in_total += vring_desc_len(vq, i)) >= in_bytes)

                    return 1;

            } else {

                if (out_bytes > 0 &&

                    (out_total += vring_desc_len(vq, i)) >= out_bytes)

                    return 1;

            }

        } while ((i = virtqueue_next_desc(vq, i)) != vq->vring.num);

    }

    return 0;

}

int virtqueue_pop(VirtQueue *vq, VirtQueueElement *elem)

{

    unsigned int i, head;

    target_phys_addr_t len;

    if (!virtqueue_num_heads(vq, vq->last_avail_idx))

        return 0;

    /* When we start there are none of either input nor output. */

    elem->out_num = elem->in_num = 0;

    i = head = virtqueue_get_head(vq, vq->last_avail_idx++);

    do {

        struct iovec *sg;

        int is_write = 0;

        if (vring_desc_flags(vq, i) & VRING_DESC_F_WRITE) {

            elem->in_addr[elem->in_num] = vring_desc_addr(vq, i);

            sg = &elem->in_sg[elem->in_num++];

            is_write = 1;

        } else

            sg = &elem->out_sg[elem->out_num++];

        /* Grab the first descriptor, and check it's OK. */

        sg->iov_len = vring_desc_len(vq, i);

        len = sg->iov_len;

        sg->iov_base = cpu_physical_memory_map(vring_desc_addr(vq, i), &len, is_write);

        if (sg->iov_base == NULL || len != sg->iov_len) {

            fprintf(stderr, "virtio: trying to map MMIO memory\n");

            exit(1);

        }

        /* If we've got too many, that implies a descriptor loop. */

        if ((elem->in_num + elem->out_num) > vq->vring.num) {

            fprintf(stderr, "Looped descriptor");

            exit(1);

        }

    } while ((i = virtqueue_next_desc(vq, i)) != vq->vring.num);

    elem->index = head;

    vq->inuse++;

    return elem->in_num + elem->out_num;

}

/* virtio device */

static VirtIODevice *to_virtio_device(PCIDevice *pci_dev)

{

    return (VirtIODevice *)pci_dev;

}

static void virtio_update_irq(VirtIODevice *vdev)

{

    qemu_set_irq(vdev->pci_dev.irq[0], vdev->isr & 1);

}

static void virtio_reset(void *opaque)

{

    VirtIODevice *vdev = opaque;

    int i;

    if (vdev->reset)

        vdev->reset(vdev);

    vdev->features = 0;

    vdev->queue_sel = 0;

    vdev->status = 0;

    vdev->isr = 0;

    virtio_update_irq(vdev);

    for(i = 0; i < VIRTIO_PCI_QUEUE_MAX; i++) {

        vdev->vq[i].vring.desc = 0;

        vdev->vq[i].vring.avail = 0;

        vdev->vq[i].vring.used = 0;

        vdev->vq[i].last_avail_idx = 0;

        vdev->vq[i].pfn = 0;

    }

}

static void virtio_ioport_write(void *opaque, uint32_t addr, uint32_t val)

{

    VirtIODevice *vdev = to_virtio_device(opaque);

    ram_addr_t pa;

    addr -= vdev->addr;

    switch (addr) {

    case VIRTIO_PCI_GUEST_FEATURES:

        /* Guest does not negotiate properly?  We have to assume nothing. */

        if (val & (1 << VIRTIO_F_BAD_FEATURE)) {

            if (vdev->bad_features)

                val = vdev->bad_features(vdev);

            else

                val = 0;

        }

        if (vdev->set_features)

            vdev->set_features(vdev, val);

        vdev->features = val;

        break;

    case VIRTIO_PCI_QUEUE_PFN:

        pa = (ram_addr_t)val << VIRTIO_PCI_QUEUE_ADDR_SHIFT;

        vdev->vq[vdev->queue_sel].pfn = val;

        if (pa == 0) {

            virtio_reset(vdev);

        } else {

            virtqueue_init(&vdev->vq[vdev->queue_sel], pa);

        }

        break;

    case VIRTIO_PCI_QUEUE_SEL:

        if (val < VIRTIO_PCI_QUEUE_MAX)

            vdev->queue_sel = val;

        break;

    case VIRTIO_PCI_QUEUE_NOTIFY:

        if (val < VIRTIO_PCI_QUEUE_MAX && vdev->vq[val].vring.desc)

            vdev->vq[val].handle_output(vdev, &vdev->vq[val]);

        break;

    case VIRTIO_PCI_STATUS:

        vdev->status = val & 0xFF;

        if (vdev->status == 0)

            virtio_reset(vdev);

        break;

    }

}

static uint32_t virtio_ioport_read(void *opaque, uint32_t addr)

{

    VirtIODevice *vdev = to_virtio_device(opaque);

    uint32_t ret = 0xFFFFFFFF;

    addr -= vdev->addr;

    switch (addr) {

    case VIRTIO_PCI_HOST_FEATURES:

        ret = vdev->get_features(vdev);

        ret |= (1 << VIRTIO_F_NOTIFY_ON_EMPTY) | (1 << VIRTIO_F_BAD_FEATURE);

        break;

    case VIRTIO_PCI_GUEST_FEATURES:

        ret = vdev->features;

        break;

    case VIRTIO_PCI_QUEUE_PFN:

        ret = vdev->vq[vdev->queue_sel].pfn;

        break;

    case VIRTIO_PCI_QUEUE_NUM:

        ret = vdev->vq[vdev->queue_sel].vring.num;

        break;

    case VIRTIO_PCI_QUEUE_SEL:

        ret = vdev->queue_sel;

        break;

    case VIRTIO_PCI_STATUS:

        ret = vdev->status;

        break;

    case VIRTIO_PCI_ISR:

        /* reading from the ISR also clears it. */

        ret = vdev->isr;

        vdev->isr = 0;

        virtio_update_irq(vdev);

        break;

    default:

        break;

    }

    return ret;

}

static uint32_t virtio_config_readb(void *opaque, uint32_t addr)

{

    VirtIODevice *vdev = opaque;

    uint8_t val;

    vdev->get_config(vdev, vdev->config);

    addr -= vdev->addr + VIRTIO_PCI_CONFIG;

    if (addr > (vdev->config_len - sizeof(val)))

        return (uint32_t)-1;

    memcpy(&val, vdev->config + addr, sizeof(val));

    return val;

}

static uint32_t virtio_config_readw(void *opaque, uint32_t addr)

{

    VirtIODevice *vdev = opaque;

    uint16_t val;

    vdev->get_config(vdev, vdev->config);

    addr -= vdev->addr + VIRTIO_PCI_CONFIG;

    if (addr > (vdev->config_len - sizeof(val)))

        return (uint32_t)-1;

    memcpy(&val, vdev->config + addr, sizeof(val));

    return val;

}

static uint32_t virtio_config_readl(void *opaque, uint32_t addr)

{

    VirtIODevice *vdev = opaque;

    uint32_t val;

    vdev->get_config(vdev, vdev->config);

    addr -= vdev->addr + VIRTIO_PCI_CONFIG;

    if (addr > (vdev->config_len - sizeof(val)))

        return (uint32_t)-1;

    memcpy(&val, vdev->config + addr, sizeof(val));

    return val;

}

static void virtio_config_writeb(void *opaque, uint32_t addr, uint32_t data)

{

    VirtIODevice *vdev = opaque;

    uint8_t val = data;

    addr -= vdev->addr + VIRTIO_PCI_CONFIG;

    if (addr > (vdev->config_len - sizeof(val)))

        return;

    memcpy(vdev->config + addr, &val, sizeof(val));

    if (vdev->set_config)

        vdev->set_config(vdev, vdev->config);

}

static void virtio_config_writew(void *opaque, uint32_t addr, uint32_t data)

{

    VirtIODevice *vdev = opaque;

    uint16_t val = data;

    addr -= vdev->addr + VIRTIO_PCI_CONFIG;

    if (addr > (vdev->config_len - sizeof(val)))

        return;

    memcpy(vdev->config + addr, &val, sizeof(val));

    if (vdev->set_config)

        vdev->set_config(vdev, vdev->config);

}

static void virtio_config_writel(void *opaque, uint32_t addr, uint32_t data)

{

    VirtIODevice *vdev = opaque;

    uint32_t val = data;

    addr -= vdev->addr + VIRTIO_PCI_CONFIG;

    if (addr > (vdev->config_len - sizeof(val)))

        return;

    memcpy(vdev->config + addr, &val, sizeof(val));

    if (vdev->set_config)

        vdev->set_config(vdev, vdev->config);

}

static void virtio_map(PCIDevice *pci_dev, int region_num,

                       uint32_t addr, uint32_t size, int type)

{

    VirtIODevice *vdev = to_virtio_device(pci_dev);

    int i;

    vdev->addr = addr;

    for (i = 0; i < 3; i++) {

        register_ioport_write(addr, 20, 1 << i, virtio_ioport_write, vdev);

        register_ioport_read(addr, 20, 1 << i, virtio_ioport_read, vdev);

    }

    if (vdev->config_len) {

        register_ioport_write(addr + 20, vdev->config_len, 1,

                              virtio_config_writeb, vdev);

        register_ioport_write(addr + 20, vdev->config_len, 2,

                              virtio_config_writew, vdev);

        register_ioport_write(addr + 20, vdev->config_len, 4,

                              virtio_config_writel, vdev);

        register_ioport_read(addr + 20, vdev->config_len, 1,

                             virtio_config_readb, vdev);

        register_ioport_read(addr + 20, vdev->config_len, 2,

                             virtio_config_readw, vdev);

        register_ioport_read(addr + 20, vdev->config_len, 4,

                             virtio_config_readl, vdev);

        vdev->get_config(vdev, vdev->config);

    }

}

VirtQueue *virtio_add_queue(VirtIODevice *vdev, int queue_size,

                            void (*handle_output)(VirtIODevice *, VirtQueue *))

{

    int i;

    for (i = 0; i < VIRTIO_PCI_QUEUE_MAX; i++) {

        if (vdev->vq[i].vring.num == 0)

            break;

    }

    if (i == VIRTIO_PCI_QUEUE_MAX || queue_size > VIRTQUEUE_MAX_SIZE)

        abort();

    vdev->vq[i].vring.num = queue_size;

    vdev->vq[i].handle_output = handle_output;

    return &vdev->vq[i];

}

void virtio_notify(VirtIODevice *vdev, VirtQueue *vq)

{

    /* Always notify when queue is empty (when feature acknowledge) */

    if ((vring_avail_flags(vq) & VRING_AVAIL_F_NO_INTERRUPT) &&

        (!(vdev->features & (1 << VIRTIO_F_NOTIFY_ON_EMPTY)) ||

         (vq->inuse || vring_avail_idx(vq) != vq->last_avail_idx)))

        return;

    vdev->isr |= 0x01;

    virtio_update_irq(vdev);

}

void virtio_notify_config(VirtIODevice *vdev)

{

    if (!(vdev->status & VIRTIO_CONFIG_S_DRIVER_OK))

        return;

    vdev->isr |= 0x03;

    virtio_update_irq(vdev);

}

void virtio_save(VirtIODevice *vdev, QEMUFile *f)

{

    int i;

    pci_device_save(&vdev->pci_dev, f);

    qemu_put_be32s(f, &vdev->addr);

    qemu_put_8s(f, &vdev->status);

    qemu_put_8s(f, &vdev->isr);

    qemu_put_be16s(f, &vdev->queue_sel);

    qemu_put_be32s(f, &vdev->features);

    qemu_put_be32(f, vdev->config_len);

    qemu_put_buffer(f, vdev->config, vdev->config_len);

    for (i = 0; i < VIRTIO_PCI_QUEUE_MAX; i++) {

        if (vdev->vq[i].vring.num == 0)

            break;

    }

    qemu_put_be32(f, i);

    for (i = 0; i < VIRTIO_PCI_QUEUE_MAX; i++) {

        if (vdev->vq[i].vring.num == 0)

            break;

        qemu_put_be32(f, vdev->vq[i].vring.num);

        qemu_put_be32s(f, &vdev->vq[i].pfn);

        qemu_put_be16s(f, &vdev->vq[i].last_avail_idx);

    }

}

void virtio_load(VirtIODevice *vdev, QEMUFile *f)

{

    int num, i;

    pci_device_load(&vdev->pci_dev, f);

    qemu_get_be32s(f, &vdev->addr);

    qemu_get_8s(f, &vdev->status);

    qemu_get_8s(f, &vdev->isr);

    qemu_get_be16s(f, &vdev->queue_sel);

    qemu_get_be32s(f, &vdev->features);

    vdev->config_len = qemu_get_be32(f);

    qemu_get_buffer(f, vdev->config, vdev->config_len);

    num = qemu_get_be32(f);

    for (i = 0; i < num; i++) {

        vdev->vq[i].vring.num = qemu_get_be32(f);

        qemu_get_be32s(f, &vdev->vq[i].pfn);

        qemu_get_be16s(f, &vdev->vq[i].last_avail_idx);

        if (vdev->vq[i].pfn) {

            target_phys_addr_t pa;

            pa = (ram_addr_t)vdev->vq[i].pfn << VIRTIO_PCI_QUEUE_ADDR_SHIFT;

            virtqueue_init(&vdev->vq[i], pa);

        }

    }

    virtio_update_irq(vdev);

}

void virtio_cleanup(VirtIODevice *vdev)

{

    if (vdev->config)

        qemu_free(vdev->config);

    qemu_free(vdev->vq);

}

VirtIODevice *virtio_init_pci(PCIBus *bus, const char *name,

                              uint16_t vendor, uint16_t device,

                              uint16_t subvendor, uint16_t subdevice,

                              uint16_t class_code, uint8_t pif,

                              size_t config_size, size_t struct_size)

{

    VirtIODevice *vdev;

    PCIDevice *pci_dev;

    uint8_t *config;

    uint32_t size;

    pci_dev = pci_register_device(bus, name, struct_size,

                                  -1, NULL, NULL);

    if (!pci_dev)

        return NULL;

    vdev = to_virtio_device(pci_dev);

    vdev->status = 0;

    vdev->isr = 0;

    vdev->queue_sel = 0;

    vdev->vq = qemu_mallocz(sizeof(VirtQueue) * VIRTIO_PCI_QUEUE_MAX);

    config = pci_dev->config;

    pci_config_set_vendor_id(config, vendor);

    pci_config_set_device_id(config, device);

    config[0x08] = VIRTIO_PCI_ABI_VERSION;

    config[0x09] = pif;

    pci_config_set_class(config, class_code);

    config[0x0e] = 0x00;

    config[0x2c] = subvendor & 0xFF;

    config[0x2d] = (subvendor >> 8) & 0xFF;

    config[0x2e] = subdevice & 0xFF;

    config[0x2f] = (subdevice >> 8) & 0xFF;

    config[0x3d] = 1;

    vdev->name = name;

    vdev->config_len = config_size;

    if (vdev->config_len)

        vdev->config = qemu_mallocz(config_size);

    else

        vdev->config = NULL;

    size = 20 + config_size;

    if (size & (size-1))

        size = 1 << qemu_fls(size);

    pci_register_io_region(pci_dev, 0, size, PCI_ADDRESS_SPACE_IO,

                           virtio_map);

    qemu_register_reset(virtio_reset, vdev);

    return vdev;

}