Archipelago » qemu

kvm: switch kvm slots to use host virtual address instead of ram_addr_t

This simplifies a later switch to the memory API in slot management.

Signed-off-by: Avi Kivity <avi@redhat.com>

kvm: x86: Push kvm_arch_debug to kvm_arch_handle_exit

There are no generic bits remaining in the handling of KVM_EXIT_DEBUG.
So push its logic completely into arch hands, i.e. only x86 so far.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>

Introduce log_start/log_stop in CPUPhysMemoryClient

In order to use log_start/log_stop with Xen as well in the vga code,
this two operations have been put in CPUPhysMemoryClient.

The two new functions cpu_physical_log_start,cpu_physical_log_stop are
used in hw/vga.c and replace the kvm_log_start/stop. With this, vga does...

kvm: Drop return values from kvm_arch_pre/post_run

We do not check them, and the only arch with non-empty implementations
always returns 0 (this is also true for qemu-kvm).

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
CC: Alexander Graf <agraf@suse.de>...

kvm: Consolidate must-have capability checks

Instead of splattering the code with #ifdefs and runtime checks for
capabilities we cannot work without anyway, provide central test
infrastructure for verifying their availability both at build and
runtime.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>...

kvm: test for ioeventfd support on old kernels

There used to be a limit of 6 KVM io bus devices in the kernel.
On such a kernel, we can't use many ioeventfds for host notification
since the limit is reached too easily.

Add an API to test for this condition....

MCE: Relay UCR MCE to guest

Port qemu-kvm's

commit 4b62fff1101a7ad77553147717a8bd3bf79df7ef
Author: Huang Ying <ying.huang@intel.com>
Date: Mon Sep 21 10:43:25 2009 +0800

MCE: Relay UCR MCE to guest

UCR (uncorrected recovery) MCE is supported in recent Intel CPUs,...

kvm: Extend kvm_arch_get_supported_cpuid() to support index

Would use it later for XSAVE related CPUID.

Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>

Move stdbool.h

Move inclusion of stdbool.h to common header files, instead of including
in an ad-hoc manner.

Signed-off-by: Paul Brook <paul@codesourcery.com>

kvm: enable smp > 1

Process INIT/SIPI requests and enable -smp > 1.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>

provide a stub version of kvm-all.c if !CONFIG_KVM

This allows limited use of kvm functions (which will return ENOSYS)
even in once-compiled modules. The patch also improves a bit the error
messages for KVM initialization.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>...

kvm: add API to set ioeventfd

Comment on kvm usage: rather than require users to do if (kvm_enabled())
and/or ifdefs, this patch adds an API that, internally, is defined to
stub function on non-kvm build, and checks kvm_enabled for non-kvm
run.

While rest of qemu code still uses if (kvm_enabled()), I think this...

Disable phsyical memory handling in userspace emulation.

Code to handle physical memory access is not meaningful in usrmode emulation,
so disable it.

Signed-off-by: Paul Brook <paul@codesourcery.com>

KVM: Rework of guest debug state writing

So far we synchronized any dirty VCPU state back into the kernel before
updating the guest debug state. This was a tribute to a deficite in x86
kernels before 2.6.33. But as this is an arch-dependent issue, it is
better handle in the x86 part of KVM and remove the writeback point for...

kvm: consume internal signal with sigtimedwait

Change the way the internal qemu signal, used for communication between
iothread and vcpus, is handled.

Block and consume it with sigtimedwait on the outer vcpu loop, which
allows more precise timing control....

kvm: Flush coalesced MMIO buffer periodly

The default action of coalesced MMIO is, cache the writing in buffer, until:
1. The buffer is full.
2. Or the exit to QEmu due to other reasons.

But this would result in a very late writing in some condition.
1. The each time write to MMIO content is small....

kvm: Add arch reset handler

Will be required by succeeding changes.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

Revert "Get rid of _t suffix"

In the very least, a change like this requires discussion on the list.

The naming convention is goofy and it causes a massive merge problem. Something
like this must be presented on the list first so people can provide input...

Fix sys-queue.h conflict for good

Problem: Our file sys-queue.h is a copy of the BSD file, but there are
some additions and it's not entirely compatible. Because of that, there have
been conflicts with system headers on BSD systems. Some hacks have been
introduced in the commits 15cc9235840a22c289edbe064a9b3c19c5f49896,...

provide tests for pit in kernel and irqchip in kernel

KVM can have an in-kernel pit or irqchip. While we don't implement it
yet, having a way for test for it (that always returns zero) will allow us
to reuse code in qemu-kvm that tests for it.

Signed-off-by: Glauber Costa <glommer@redhat.com>...

kvm: x86: Save/restore KVM-specific CPU states

Save and restore all so far neglected KVM-specific CPU states. Handling
the TSC stabilizes migration in KVM mode. The interrupt_bitmap and
mp_state are currently unused, but will become relevant for in-kernel...

kvm: Rework dirty bitmap synchronization

Extend kvm_physical_sync_dirty_bitmap() so that is can sync across
multiple slots. Useful for updating the whole dirty log during
migration. Moreover, properly pass down errors the whole call chain.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>...

Introduce kvm_check_extension to check if KVM extensions are supported

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

kvm: Add sanity checks to slot management (Jan Kiszka)

Fail loudly if we run out of memory slot.

Make sure that dirty log start/stop works with consistent memory regions
by reporting invalid parameters. This reveals several inconsistencies in
the vga code, patch to fix them follows later in this series....

kvm: sync vcpu state during initialization (Hollis Blanchard)

Currently on x86, qemu initializes CPUState but KVM ignores it and does its
own vcpu initialization. However, PowerPC KVM needs to be able to set the
initial register state to support the -kernel and -append options....

Add virtio-balloon support

This adds a VirtIO based balloon driver. It uses madvise() to actually balloon
the memory when possible.

Until 2.6.27, KVM forced memory pinning so we must disable ballooning unless the
kernel actually supports it when using KVM. It's always safe when using TCG....

Define kvm_ioctl in the same way as ioctl

The third argument to ioctl is a ... which allows any value to be passed. In
practice, glibc always treats the argument as a void *.

Do the same thing for the kvm ioctls to keep things consistent with a
traditional ioctl....