Synnefo » snf-ganeti

Ganeti remote API

=================

Documents Ganeti version |version|

.. contents::

Introduction

------------

Ganeti supports a remote API for enable external tools to easily

retrieve information about a cluster's state. The remote API daemon,

*ganeti-rapi*, is automatically started on the master node. By default

it runs on TCP port 5080, but this can be changed either in

``.../constants.py`` or via the command line parameter *-p*. SSL mode,

which is used by default, can also be disabled by passing command line

parameters.

Users and passwords

-------------------

``ganeti-rapi`` reads users and passwords from a file (usually

``/var/lib/ganeti/rapi/users``) on startup. Changes to the file will be

read automatically.

Each line consists of two or three fields separated by whitespace. The

first two fields are for username and password. The third field is

optional and can be used to specify per-user options. Currently,

``write`` is the only option supported and enables the user to execute

operations modifying the cluster. Lines starting with the hash sign

(``#``) are treated as comments.

Passwords can either be written in clear text or as a hash. Clear text

passwords may not start with an opening brace (``{``) or they must be

prefixed with ``{cleartext}``. To use the hashed form, get the MD5 hash

of the string ``$username:Ganeti Remote API:$password`` (e.g. ``echo -n

'jack:Ganeti Remote API:abc123' | openssl md5``) [#pwhash]_ and prefix

it with ``{ha1}``. Using the scheme prefix for all passwords is

recommended. Scheme prefixes are not case sensitive.

Example::

  # Give Jack and Fred read-only access

  jack abc123

  fred {cleartext}foo555

  # Give write access to an imaginary instance creation script

  autocreator xyz789 write

  # Hashed password for Jessica

  jessica {HA1}7046452df2cbb530877058712cf17bd4 write

.. [#pwhash] Using the MD5 hash of username, realm and password is

   described in :rfc:`2617` ("HTTP Authentication"), sections 3.2.2.2

   and 3.3. The reason for using it over another algorithm is forward

   compatibility. If ``ganeti-rapi`` were to implement HTTP Digest

   authentication in the future, the same hash could be used.

   In the current version ``ganeti-rapi``'s realm, ``Ganeti Remote

   API``, can only be changed by modifying the source code.

Protocol

--------

The protocol used is JSON_ over HTTP designed after the REST_ principle.

HTTP Basic authentication as per :rfc:`2617` is supported.

.. _JSON: http://www.json.org/

.. _REST: http://en.wikipedia.org/wiki/Representational_State_Transfer

HTTP requests with a body (e.g. ``PUT`` or ``POST``) require the request

header ``Content-type`` be set to ``application/json`` (see :rfc:`2616`

(HTTP/1.1), section 7.2.1).

A note on JSON as used by RAPI

++++++++++++++++++++++++++++++

JSON_ as used by Ganeti RAPI does not conform to the specification in

:rfc:`4627`. Section 2 defines a JSON text to be either an object

(``{"key": "value", …}``) or an array (``[1, 2, 3, …]``). In violation

of this RAPI uses plain strings (``"master-candidate"``, ``"1234"``) for

some requests or responses. Changing this now would likely break

existing clients and cause a lot of trouble.

.. highlight:: ruby

Unlike Python's `JSON encoder and decoder

<http://docs.python.org/library/json.html>`_, other programming

languages or libraries may only provide a strict implementation, not

allowing plain values. For those, responses can usually be wrapped in an

array whose first element is then used, e.g. the response ``"1234"``

becomes ``["1234"]``. This works equally well for more complex values.

Example in Ruby::

  require "json"

  # Insert code to get response here

  response = "\"1234\""

  decoded = JSON.parse("[#{response}]").first

Short of modifying the encoder to allow encoding to a less strict

format, requests will have to be formatted by hand. Newer RAPI requests

already use a dictionary as their input data and shouldn't cause any

problems.

PUT or POST?

------------

According to :rfc:`2616` the main difference between PUT and POST is

that POST can create new resources but PUT can only create the resource

the URI was pointing to on the PUT request.

Unfortunately, due to historic reasons, the Ganeti RAPI library is not

consistent with this usage, so just use the methods as documented below

for each resource.

For more details have a look in the source code at

``lib/rapi/rlib2.py``.

Generic parameter types

-----------------------

A few generic refered parameter types and the values they allow.

``bool``

++++++++

A boolean option will accept ``1`` or ``0`` as numbers but not

i.e. ``True`` or ``False``.

Generic parameters

------------------

A few parameter mean the same thing across all resources which implement

it.

``bulk``

++++++++

Bulk-mode means that for the resources which usually return just a list

of child resources (e.g. ``/2/instances`` which returns just instance

names), the output will instead contain detailed data for all these

subresources. This is more efficient than query-ing the sub-resources

themselves.

``dry-run``

+++++++++++

The boolean *dry-run* argument, if provided and set, signals to Ganeti

that the job should not be executed, only the pre-execution checks will

be done.

This is useful in trying to determine (without guarantees though, as in

the meantime the cluster state could have changed) if the operation is

likely to succeed or at least start executing.

``force``

+++++++++++

Force operation to continue even if it will cause the cluster to become

inconsistent (e.g. because there are not enough master candidates).

Parameter details

-----------------

Some parameters are not straight forward, so we describe them in details

here.

.. _rapi-ipolicy:

``ipolicy``

+++++++++++

The instance policy specification is a dict with the following fields:

.. pyassert::

  constants.IPOLICY_ALL_KEYS == set([constants.ISPECS_MIN,

                                     constants.ISPECS_MAX,

                                     constants.ISPECS_STD,

                                     constants.IPOLICY_DTS,

                                     constants.IPOLICY_VCPU_RATIO,

                                     constants.IPOLICY_SPINDLE_RATIO])

.. pyassert::

  (set(constants.ISPECS_PARAMETER_TYPES.keys()) ==

   set([constants.ISPEC_MEM_SIZE,

        constants.ISPEC_DISK_SIZE,

        constants.ISPEC_DISK_COUNT,

        constants.ISPEC_CPU_COUNT,

        constants.ISPEC_NIC_COUNT,

        constants.ISPEC_SPINDLE_USE]))

.. |ispec-min| replace:: :pyeval:`constants.ISPECS_MIN`

.. |ispec-max| replace:: :pyeval:`constants.ISPECS_MAX`

.. |ispec-std| replace:: :pyeval:`constants.ISPECS_STD`

|ispec-min|, |ispec-max|, |ispec-std|

  A sub- `dict` with the following fields, which sets the limit and standard

  values of the instances:

  :pyeval:`constants.ISPEC_MEM_SIZE`

    The size in MiB of the memory used

  :pyeval:`constants.ISPEC_DISK_SIZE`

    The size in MiB of the disk used

  :pyeval:`constants.ISPEC_DISK_COUNT`

    The numbers of disks used

  :pyeval:`constants.ISPEC_CPU_COUNT`

    The numbers of cpus used

  :pyeval:`constants.ISPEC_NIC_COUNT`

    The numbers of nics used

  :pyeval:`constants.ISPEC_SPINDLE_USE`

    The numbers of virtual disk spindles used by this instance. They are

    not real in the sense of actual HDD spindles, but useful for

    accounting the spindle usage on the residing node

:pyeval:`constants.IPOLICY_DTS`

  A `list` of disk templates allowed for instances using this policy

:pyeval:`constants.IPOLICY_VCPU_RATIO`

  Maximum ratio of virtual to physical CPUs (`float`)

:pyeval:`constants.IPOLICY_SPINDLE_RATIO`

  Maximum ratio of instances to their node's ``spindle_count`` (`float`)

Usage examples

--------------

You can access the API using your favorite programming language as long

as it supports network connections.

Ganeti RAPI client

++++++++++++++++++

Ganeti includes a standalone RAPI client, ``lib/rapi/client.py``.

Shell

+++++

.. highlight:: sh

Using wget::

   wget -q -O - https://CLUSTERNAME:5080/2/info

or curl::

  curl https://CLUSTERNAME:5080/2/info

Python

++++++

.. highlight:: python

::

  import urllib2

  f = urllib2.urlopen('https://CLUSTERNAME:5080/2/info')

  print f.read()

JavaScript

++++++++++

.. warning:: While it's possible to use JavaScript, it poses several

   potential problems, including browser blocking request due to

   non-standard ports or different domain names. Fetching the data on

   the webserver is easier.

.. highlight:: javascript

::

  var url = 'https://CLUSTERNAME:5080/2/info';

  var info;

  var xmlreq = new XMLHttpRequest();

  xmlreq.onreadystatechange = function () {

    if (xmlreq.readyState != 4) return;

    if (xmlreq.status == 200) {

      info = eval("(" + xmlreq.responseText + ")");

      alert(info);

    } else {

      alert('Error fetching cluster info');

    }

    xmlreq = null;

  };

  xmlreq.open('GET', url, true);

  xmlreq.send(null);

Resources

---------

.. highlight:: javascript

``/``

+++++

The root resource. Has no function, but for legacy reasons the ``GET``

method is supported.

``/2``

++++++

Has no function, but for legacy reasons the ``GET`` method is supported.

``/2/info``

+++++++++++

Cluster information resource.

It supports the following commands: ``GET``.

``GET``

~~~~~~~

Returns cluster information.

Example::

  {

    "config_version": 2000000,

    "name": "cluster",

    "software_version": "2.0.0~beta2",

    "os_api_version": 10,

    "export_version": 0,

    "candidate_pool_size": 10,

    "enabled_hypervisors": [

      "fake"

    ],

    "hvparams": {

      "fake": {}

     },

    "default_hypervisor": "fake",

    "master": "node1.example.com",

    "architecture": [

      "64bit",

      "x86_64"

    ],

    "protocol_version": 20,

    "beparams": {

      "default": {

        "auto_balance": true,

        "vcpus": 1,

        "memory": 128

       }

      }

    }

``/2/redistribute-config``

++++++++++++++++++++++++++

Redistribute configuration to all nodes.

It supports the following commands: ``PUT``.

``PUT``

~~~~~~~

Redistribute configuration to all nodes. The result will be a job id.

Job result:

.. opcode_result:: OP_CLUSTER_REDIST_CONF

``/2/features``

+++++++++++++++

``GET``

~~~~~~~

Returns a list of features supported by the RAPI server. Available

features:

.. pyassert::

  rlib2.ALL_FEATURES == set([rlib2._INST_CREATE_REQV1,

                             rlib2._INST_REINSTALL_REQV1,

                             rlib2._NODE_MIGRATE_REQV1,

                             rlib2._NODE_EVAC_RES1])

:pyeval:`rlib2._INST_CREATE_REQV1`

  Instance creation request data version 1 supported

:pyeval:`rlib2._INST_REINSTALL_REQV1`

  Instance reinstall supports body parameters

:pyeval:`rlib2._NODE_MIGRATE_REQV1`

  Whether migrating a node (``/2/nodes/[node_name]/migrate``) supports

  request body parameters

:pyeval:`rlib2._NODE_EVAC_RES1`

  Whether evacuating a node (``/2/nodes/[node_name]/evacuate``) returns

  a new-style result (see resource description)

``/2/modify``

++++++++++++++++++++++++++++++++++++++++

Modifies cluster parameters.

Supports the following commands: ``PUT``.

``PUT``

~~~~~~~

Returns a job ID.

Body parameters:

.. opcode_params:: OP_CLUSTER_SET_PARAMS

Job result:

.. opcode_result:: OP_CLUSTER_SET_PARAMS

``/2/groups``

+++++++++++++

The groups resource.

It supports the following commands: ``GET``, ``POST``.

``GET``

~~~~~~~

Returns a list of all existing node groups.

Example::

    [

      {

        "name": "group1",

        "uri": "\/2\/groups\/group1"

      },

      {

        "name": "group2",

        "uri": "\/2\/groups\/group2"

      }

    ]

If the optional bool *bulk* argument is provided and set to a true value

(i.e ``?bulk=1``), the output contains detailed information about node

groups as a list.

Returned fields: :pyeval:`utils.CommaJoin(sorted(rlib2.G_FIELDS))`.

Example::

    [

      {

        "name": "group1",

        "node_cnt": 2,

        "node_list": [

          "node1.example.com",

          "node2.example.com"

        ],

        "uuid": "0d7d407c-262e-49af-881a-6a430034bf43"

      },

      {

        "name": "group2",

        "node_cnt": 1,

        "node_list": [

          "node3.example.com"

        ],

        "uuid": "f5a277e7-68f9-44d3-a378-4b25ecb5df5c"

      }

    ]

``POST``

~~~~~~~~

Creates a node group.

If the optional bool *dry-run* argument is provided, the job will not be

actually executed, only the pre-execution checks will be done.

Returns: a job ID that can be used later for polling.

Body parameters:

.. opcode_params:: OP_GROUP_ADD

Earlier versions used a parameter named ``name`` which, while still

supported, has been renamed to ``group_name``.

Job result:

.. opcode_result:: OP_GROUP_ADD

``/2/groups/[group_name]``

++++++++++++++++++++++++++

Returns information about a node group.

It supports the following commands: ``GET``, ``DELETE``.

``GET``

~~~~~~~

Returns information about a node group, similar to the bulk output from

the node group list.

Returned fields: :pyeval:`utils.CommaJoin(sorted(rlib2.G_FIELDS))`.

``DELETE``

~~~~~~~~~~

Deletes a node group.

It supports the ``dry-run`` argument.

Job result:

.. opcode_result:: OP_GROUP_REMOVE

``/2/groups/[group_name]/modify``

+++++++++++++++++++++++++++++++++

Modifies the parameters of a node group.

Supports the following commands: ``PUT``.

``PUT``

~~~~~~~

Returns a job ID.

Body parameters:

.. opcode_params:: OP_GROUP_SET_PARAMS

   :exclude: group_name

Job result:

.. opcode_result:: OP_GROUP_SET_PARAMS

``/2/groups/[group_name]/rename``

+++++++++++++++++++++++++++++++++

Renames a node group.

Supports the following commands: ``PUT``.

``PUT``

~~~~~~~

Returns a job ID.

Body parameters:

.. opcode_params:: OP_GROUP_RENAME

   :exclude: group_name

Job result:

.. opcode_result:: OP_GROUP_RENAME

``/2/groups/[group_name]/assign-nodes``

+++++++++++++++++++++++++++++++++++++++

Assigns nodes to a group.

Supports the following commands: ``PUT``.

``PUT``

~~~~~~~

Returns a job ID. It supports the ``dry-run`` and ``force`` arguments.

Body parameters:

.. opcode_params:: OP_GROUP_ASSIGN_NODES

   :exclude: group_name, force, dry_run

Job result:

.. opcode_result:: OP_GROUP_ASSIGN_NODES

``/2/groups/[group_name]/tags``

+++++++++++++++++++++++++++++++

Manages per-nodegroup tags.

Supports the following commands: ``GET``, ``PUT``, ``DELETE``.

``GET``

~~~~~~~

Returns a list of tags.

Example::

    ["tag1", "tag2", "tag3"]

``PUT``

~~~~~~~

Add a set of tags.

The request as a list of strings should be ``PUT`` to this URI. The

result will be a job id.

It supports the ``dry-run`` argument.

``DELETE``

~~~~~~~~~~

Delete a tag.

In order to delete a set of tags, the DELETE request should be addressed

to URI like::

    /tags?tag=[tag]&tag=[tag]

It supports the ``dry-run`` argument.

``/2/instances``

++++++++++++++++

The instances resource.

It supports the following commands: ``GET``, ``POST``.

``GET``

~~~~~~~

Returns a list of all available instances.

Example::

    [

      {

        "name": "web.example.com",

        "uri": "\/instances\/web.example.com"

      },

      {

        "name": "mail.example.com",

        "uri": "\/instances\/mail.example.com"

      }

    ]

If the optional bool *bulk* argument is provided and set to a true value

(i.e ``?bulk=1``), the output contains detailed information about

instances as a list.

Returned fields: :pyeval:`utils.CommaJoin(sorted(rlib2.I_FIELDS))`.

Example::

    [

      {

         "status": "running",

         "disk_usage": 20480,

         "nic.bridges": [

           "xen-br0"

          ],

         "name": "web.example.com",

         "tags": ["tag1", "tag2"],

         "beparams": {

           "vcpus": 2,

           "memory": 512

         },

         "disk.sizes": [

             20480

         ],

         "pnode": "node1.example.com",

         "nic.macs": ["01:23:45:67:89:01"],

         "snodes": ["node2.example.com"],

         "disk_template": "drbd",

         "admin_state": true,

         "os": "debian-etch",

         "oper_state": true

      },

      ...

    ]

``POST``

~~~~~~~~

Creates an instance.

If the optional bool *dry-run* argument is provided, the job will not be

actually executed, only the pre-execution checks will be done. Query-ing

the job result will return, in both dry-run and normal case, the list of

nodes selected for the instance.

Returns: a job ID that can be used later for polling.

Body parameters:

``__version__`` (int, required)

  Must be ``1`` (older Ganeti versions used a different format for

  instance creation requests, version ``0``, but that format is no

  longer supported)

.. opcode_params:: OP_INSTANCE_CREATE

Earlier versions used parameters named ``name`` and ``os``. These have

been replaced by ``instance_name`` and ``os_type`` to match the

underlying opcode. The old names can still be used.

Job result:

.. opcode_result:: OP_INSTANCE_CREATE

``/2/instances/[instance_name]``

++++++++++++++++++++++++++++++++

Instance-specific resource.

It supports the following commands: ``GET``, ``DELETE``.

``GET``

~~~~~~~

Returns information about an instance, similar to the bulk output from

the instance list.

Returned fields: :pyeval:`utils.CommaJoin(sorted(rlib2.I_FIELDS))`.

``DELETE``

~~~~~~~~~~

Deletes an instance.

It supports the ``dry-run`` argument.

Job result:

.. opcode_result:: OP_INSTANCE_REMOVE

``/2/instances/[instance_name]/info``

+++++++++++++++++++++++++++++++++++++++

It supports the following commands: ``GET``.

``GET``

~~~~~~~

Requests detailed information about the instance. An optional parameter,

``static`` (bool), can be set to return only static information from the

configuration without querying the instance's nodes. The result will be

a job id.

Job result:

.. opcode_result:: OP_INSTANCE_QUERY_DATA

``/2/instances/[instance_name]/reboot``

+++++++++++++++++++++++++++++++++++++++

Reboots URI for an instance.

It supports the following commands: ``POST``.

``POST``

~~~~~~~~

Reboots the instance.

The URI takes optional ``type=soft|hard|full`` and

``ignore_secondaries=0|1`` parameters.

``type`` defines the reboot type. ``soft`` is just a normal reboot,

without terminating the hypervisor. ``hard`` means full shutdown

(including terminating the hypervisor process) and startup again.

``full`` is like ``hard`` but also recreates the configuration from

ground up as if you would have done a ``gnt-instance shutdown`` and

``gnt-instance start`` on it.

``ignore_secondaries`` is a bool argument indicating if we start the

instance even if secondary disks are failing.

It supports the ``dry-run`` argument.

Job result:

.. opcode_result:: OP_INSTANCE_REBOOT

``/2/instances/[instance_name]/shutdown``

+++++++++++++++++++++++++++++++++++++++++

Instance shutdown URI.

It supports the following commands: ``PUT``.

``PUT``

~~~~~~~

Shutdowns an instance.

It supports the ``dry-run`` argument.

.. opcode_params:: OP_INSTANCE_SHUTDOWN

   :exclude: instance_name, dry_run

Job result:

.. opcode_result:: OP_INSTANCE_SHUTDOWN

``/2/instances/[instance_name]/startup``

++++++++++++++++++++++++++++++++++++++++

Instance startup URI.

It supports the following commands: ``PUT``.

``PUT``

~~~~~~~

Startup an instance.

The URI takes an optional ``force=1|0`` parameter to start the

instance even if secondary disks are failing.

It supports the ``dry-run`` argument.

Job result:

.. opcode_result:: OP_INSTANCE_STARTUP

``/2/instances/[instance_name]/reinstall``

++++++++++++++++++++++++++++++++++++++++++++++

Installs the operating system again.

It supports the following commands: ``POST``.

``POST``

~~~~~~~~

Returns a job ID.

Body parameters:

``os`` (string, required)

  Instance operating system.

``start`` (bool, defaults to true)

  Whether to start instance after reinstallation.

``osparams`` (dict)

  Dictionary with (temporary) OS parameters.

For backwards compatbility, this resource also takes the query

parameters ``os`` (OS template name) and ``nostartup`` (bool). New

clients should use the body parameters.

``/2/instances/[instance_name]/replace-disks``

++++++++++++++++++++++++++++++++++++++++++++++

Replaces disks on an instance.

It supports the following commands: ``POST``.

``POST``

~~~~~~~~

Returns a job ID.

Body parameters:

.. opcode_params:: OP_INSTANCE_REPLACE_DISKS

   :exclude: instance_name

Ganeti 2.4 and below used query parameters. Those are deprecated and

should no longer be used.

Job result:

.. opcode_result:: OP_INSTANCE_REPLACE_DISKS

``/2/instances/[instance_name]/activate-disks``

+++++++++++++++++++++++++++++++++++++++++++++++

Activate disks on an instance.

It supports the following commands: ``PUT``.

``PUT``

~~~~~~~

Takes the bool parameter ``ignore_size``. When set ignore the recorded

size (useful for forcing activation when recorded size is wrong).

Job result:

.. opcode_result:: OP_INSTANCE_ACTIVATE_DISKS

``/2/instances/[instance_name]/deactivate-disks``

+++++++++++++++++++++++++++++++++++++++++++++++++

Deactivate disks on an instance.

It supports the following commands: ``PUT``.

``PUT``

~~~~~~~

Takes no parameters.

Job result:

.. opcode_result:: OP_INSTANCE_DEACTIVATE_DISKS

``/2/instances/[instance_name]/recreate-disks``

+++++++++++++++++++++++++++++++++++++++++++++++++

Recreate disks of an instance. Supports the following commands:

``POST``.

``POST``

~~~~~~~~

Returns a job ID.

Body parameters:

.. opcode_params:: OP_INSTANCE_RECREATE_DISKS

   :exclude: instance_name

Job result:

.. opcode_result:: OP_INSTANCE_RECREATE_DISKS

``/2/instances/[instance_name]/disk/[disk_index]/grow``

+++++++++++++++++++++++++++++++++++++++++++++++++++++++

Grows one disk of an instance.

Supports the following commands: ``POST``.

``POST``

~~~~~~~~

Returns a job ID.

Body parameters:

.. opcode_params:: OP_INSTANCE_GROW_DISK

   :exclude: instance_name, disk

Job result:

.. opcode_result:: OP_INSTANCE_GROW_DISK

``/2/instances/[instance_name]/prepare-export``

+++++++++++++++++++++++++++++++++++++++++++++++++

Prepares an export of an instance.

It supports the following commands: ``PUT``.

``PUT``

~~~~~~~

Takes one parameter, ``mode``, for the export mode. Returns a job ID.

Job result:

.. opcode_result:: OP_BACKUP_PREPARE

``/2/instances/[instance_name]/export``

+++++++++++++++++++++++++++++++++++++++++++++++++

Exports an instance.

It supports the following commands: ``PUT``.

``PUT``

~~~~~~~

Returns a job ID.

Body parameters:

.. opcode_params:: OP_BACKUP_EXPORT

   :exclude: instance_name

   :alias: target_node=destination

Job result:

.. opcode_result:: OP_BACKUP_EXPORT

``/2/instances/[instance_name]/migrate``

++++++++++++++++++++++++++++++++++++++++

Migrates an instance.

Supports the following commands: ``PUT``.

``PUT``

~~~~~~~

Returns a job ID.

Body parameters:

.. opcode_params:: OP_INSTANCE_MIGRATE

   :exclude: instance_name, live

Job result:

.. opcode_result:: OP_INSTANCE_MIGRATE

``/2/instances/[instance_name]/failover``

+++++++++++++++++++++++++++++++++++++++++

Does a failover of an instance.

Supports the following commands: ``PUT``.

``PUT``

~~~~~~~

Returns a job ID.

Body parameters:

.. opcode_params:: OP_INSTANCE_FAILOVER

   :exclude: instance_name

Job result:

.. opcode_result:: OP_INSTANCE_FAILOVER

``/2/instances/[instance_name]/rename``

++++++++++++++++++++++++++++++++++++++++

Renames an instance.

Supports the following commands: ``PUT``.

``PUT``

~~~~~~~

Returns a job ID.

Body parameters:

.. opcode_params:: OP_INSTANCE_RENAME

   :exclude: instance_name

Job result:

.. opcode_result:: OP_INSTANCE_RENAME

``/2/instances/[instance_name]/modify``

++++++++++++++++++++++++++++++++++++++++

Modifies an instance.

Supports the following commands: ``PUT``.

``PUT``

~~~~~~~

Returns a job ID.

Body parameters:

.. opcode_params:: OP_INSTANCE_SET_PARAMS

   :exclude: instance_name

Job result:

.. opcode_result:: OP_INSTANCE_SET_PARAMS

``/2/instances/[instance_name]/console``

++++++++++++++++++++++++++++++++++++++++

Request information for connecting to instance's console.

Supports the following commands: ``GET``.

``GET``

~~~~~~~

Returns a dictionary containing information about the instance's

console. Contained keys:

.. pyassert::

   constants.CONS_ALL == frozenset([

     constants.CONS_MESSAGE,

     constants.CONS_SSH,

     constants.CONS_VNC,

     constants.CONS_SPICE,

     ])

``instance``

  Instance name

``kind``

  Console type, one of :pyeval:`constants.CONS_SSH`,

  :pyeval:`constants.CONS_VNC`, :pyeval:`constants.CONS_SPICE`

  or :pyeval:`constants.CONS_MESSAGE`

``message``

  Message to display (:pyeval:`constants.CONS_MESSAGE` type only)

``host``

  Host to connect to (:pyeval:`constants.CONS_SSH`,

  :pyeval:`constants.CONS_VNC` or :pyeval:`constants.CONS_SPICE` only)

``port``

  TCP port to connect to (:pyeval:`constants.CONS_VNC` or

  :pyeval:`constants.CONS_SPICE` only)

``user``

  Username to use (:pyeval:`constants.CONS_SSH` only)

``command``

  Command to execute on machine (:pyeval:`constants.CONS_SSH` only)

``display``

  VNC display number (:pyeval:`constants.CONS_VNC` only)

``/2/instances/[instance_name]/tags``

+++++++++++++++++++++++++++++++++++++

Manages per-instance tags.

It supports the following commands: ``GET``, ``PUT``, ``DELETE``.

``GET``

~~~~~~~

Returns a list of tags.

Example::

    ["tag1", "tag2", "tag3"]

``PUT``

~~~~~~~

Add a set of tags.

The request as a list of strings should be ``PUT`` to this URI. The

result will be a job id.

It supports the ``dry-run`` argument.

``DELETE``

~~~~~~~~~~

Delete a tag.

In order to delete a set of tags, the DELETE request should be addressed

to URI like::

    /tags?tag=[tag]&tag=[tag]

It supports the ``dry-run`` argument.

``/2/jobs``

+++++++++++

The ``/2/jobs`` resource.

It supports the following commands: ``GET``.

``GET``

~~~~~~~

Returns a dictionary of jobs.

Returns: a dictionary with jobs id and uri.

If the optional bool *bulk* argument is provided and set to a true value

(i.e. ``?bulk=1``), the output contains detailed information about jobs

as a list.

Returned fields for bulk requests (unlike other bulk requests, these

fields are not the same as for per-job requests):

:pyeval:`utils.CommaJoin(sorted(rlib2.J_FIELDS_BULK))`.

``/2/jobs/[job_id]``

++++++++++++++++++++

Individual job URI.

It supports the following commands: ``GET``, ``DELETE``.

``GET``

~~~~~~~

Returns a dictionary with job parameters, containing the fields

:pyeval:`utils.CommaJoin(sorted(rlib2.J_FIELDS))`.

The result includes:

- id: job ID as a number

- status: current job status as a string

- ops: involved OpCodes as a list of dictionaries for each opcodes in

  the job

- opstatus: OpCodes status as a list

- opresult: OpCodes results as a list

For a successful opcode, the ``opresult`` field corresponding to it will

contain the raw result from its :term:`LogicalUnit`. In case an opcode

has failed, its element in the opresult list will be a list of two

elements:

- first element the error type (the Ganeti internal error name)

- second element a list of either one or two elements:

  - the first element is the textual error description

  - the second element, if any, will hold an error classification

The error classification is most useful for the ``OpPrereqError``

error type - these errors happen before the OpCode has started

executing, so it's possible to retry the OpCode without side

effects. But whether it make sense to retry depends on the error

classification:

.. pyassert::

   errors.ECODE_ALL == set([errors.ECODE_RESOLVER, errors.ECODE_NORES,

     errors.ECODE_INVAL, errors.ECODE_STATE, errors.ECODE_NOENT,

     errors.ECODE_EXISTS, errors.ECODE_NOTUNIQUE, errors.ECODE_FAULT,

     errors.ECODE_ENVIRON])

:pyeval:`errors.ECODE_RESOLVER`

  Resolver errors. This usually means that a name doesn't exist in DNS,

  so if it's a case of slow DNS propagation the operation can be retried

  later.

:pyeval:`errors.ECODE_NORES`

  Not enough resources (iallocator failure, disk space, memory,

  etc.). If the resources on the cluster increase, the operation might

  succeed.

:pyeval:`errors.ECODE_INVAL`

  Wrong arguments (at syntax level). The operation will not ever be

  accepted unless the arguments change.

:pyeval:`errors.ECODE_STATE`

  Wrong entity state. For example, live migration has been requested for

  a down instance, or instance creation on an offline node. The

  operation can be retried once the resource has changed state.

:pyeval:`errors.ECODE_NOENT`

  Entity not found. For example, information has been requested for an

  unknown instance.

:pyeval:`errors.ECODE_EXISTS`

  Entity already exists. For example, instance creation has been

  requested for an already-existing instance.

:pyeval:`errors.ECODE_NOTUNIQUE`

  Resource not unique (e.g. MAC or IP duplication).

:pyeval:`errors.ECODE_FAULT`

  Internal cluster error. For example, a node is unreachable but not set

  offline, or the ganeti node daemons are not working, etc. A

  ``gnt-cluster verify`` should be run.

:pyeval:`errors.ECODE_ENVIRON`

  Environment error (e.g. node disk error). A ``gnt-cluster verify``

  should be run.

Note that in the above list, by entity we refer to a node or instance,

while by a resource we refer to an instance's disk, or NIC, etc.

``DELETE``

~~~~~~~~~~

Cancel a not-yet-started job.

``/2/jobs/[job_id]/wait``

+++++++++++++++++++++++++

``GET``

~~~~~~~

Waits for changes on a job. Takes the following body parameters in a

dict:

``fields``

  The job fields on which to watch for changes

``previous_job_info``

  Previously received field values or None if not yet available

``previous_log_serial``

  Highest log serial number received so far or None if not yet

  available

Returns None if no changes have been detected and a dict with two keys,

``job_info`` and ``log_entries`` otherwise.

``/2/nodes``

++++++++++++

Nodes resource.

It supports the following commands: ``GET``.

``GET``

~~~~~~~

Returns a list of all nodes.

Example::

    [

      {

        "id": "node1.example.com",

        "uri": "\/nodes\/node1.example.com"

      },

      {

        "id": "node2.example.com",

        "uri": "\/nodes\/node2.example.com"

      }

    ]

If the optional bool *bulk* argument is provided and set to a true value

(i.e ``?bulk=1``), the output contains detailed information about nodes

as a list.

Returned fields: :pyeval:`utils.CommaJoin(sorted(rlib2.N_FIELDS))`.

Example::

    [

      {

        "pinst_cnt": 1,

        "mfree": 31280,

        "mtotal": 32763,

        "name": "www.example.com",

        "tags": [],

        "mnode": 512,

        "dtotal": 5246208,

        "sinst_cnt": 2,

        "dfree": 5171712,

        "offline": false

      },

      ...

    ]

``/2/nodes/[node_name]``

+++++++++++++++++++++++++++++++++

Returns information about a node.

It supports the following commands: ``GET``.

Returned fields: :pyeval:`utils.CommaJoin(sorted(rlib2.N_FIELDS))`.

``/2/nodes/[node_name]/powercycle``

+++++++++++++++++++++++++++++++++++

Powercycles a node. Supports the following commands: ``POST``.

``POST``

~~~~~~~~

Returns a job ID.

Job result:

.. opcode_result:: OP_NODE_POWERCYCLE

``/2/nodes/[node_name]/evacuate``

+++++++++++++++++++++++++++++++++

Evacuates instances off a node.

It supports the following commands: ``POST``.

``POST``

~~~~~~~~

Returns a job ID. The result of the job will contain the IDs of the

individual jobs submitted to evacuate the node.

Body parameters:

.. opcode_params:: OP_NODE_EVACUATE

   :exclude: nodes

Up to and including Ganeti 2.4 query arguments were used. Those are no

longer supported. The new request can be detected by the presence of the

:pyeval:`rlib2._NODE_EVAC_RES1` feature string.

Job result:

.. opcode_result:: OP_NODE_EVACUATE

``/2/nodes/[node_name]/migrate``

+++++++++++++++++++++++++++++++++

Migrates all primary instances from a node.

It supports the following commands: ``POST``.

``POST``

~~~~~~~~

If no mode is explicitly specified, each instances' hypervisor default

migration mode will be used. Body parameters:

.. opcode_params:: OP_NODE_MIGRATE

   :exclude: node_name

The query arguments used up to and including Ganeti 2.4 are deprecated

and should no longer be used. The new request format can be detected by

the presence of the :pyeval:`rlib2._NODE_MIGRATE_REQV1` feature string.

Job result:

.. opcode_result:: OP_NODE_MIGRATE

``/2/nodes/[node_name]/role``

+++++++++++++++++++++++++++++

Manages node role.

It supports the following commands: ``GET``, ``PUT``.

The role is always one of the following:

  - drained

  - master-candidate

  - offline

  - regular

Note that the 'master' role is a special, and currently it can't be

modified via RAPI, only via the command line (``gnt-cluster

master-failover``).

``GET``

~~~~~~~

Returns the current node role.

Example::

    "master-candidate"

``PUT``

~~~~~~~

Change the node role.

The request is a string which should be PUT to this URI. The result will

be a job id.

It supports the bool ``force`` argument.

Job result:

.. opcode_result:: OP_NODE_SET_PARAMS

``/2/nodes/[node_name]/modify``

+++++++++++++++++++++++++++++++

Modifies the parameters of a node. Supports the following commands:

``POST``.

``POST``

~~~~~~~~

Returns a job ID.

Body parameters:

.. opcode_params:: OP_NODE_SET_PARAMS

   :exclude: node_name

Job result:

.. opcode_result:: OP_NODE_SET_PARAMS

``/2/nodes/[node_name]/storage``

++++++++++++++++++++++++++++++++

Manages storage units on the node.

``GET``

~~~~~~~

.. pyassert::

   constants.VALID_STORAGE_TYPES == set([constants.ST_FILE,

                                         constants.ST_LVM_PV,

                                         constants.ST_LVM_VG])

Requests a list of storage units on a node. Requires the parameters

``storage_type`` (one of :pyeval:`constants.ST_FILE`,

:pyeval:`constants.ST_LVM_PV` or :pyeval:`constants.ST_LVM_VG`) and

``output_fields``. The result will be a job id, using which the result

can be retrieved.

``/2/nodes/[node_name]/storage/modify``

+++++++++++++++++++++++++++++++++++++++

Modifies storage units on the node.

``PUT``

~~~~~~~

Modifies parameters of storage units on the node. Requires the

parameters ``storage_type`` (one of :pyeval:`constants.ST_FILE`,