Synnefo » snf-ganeti

=============================

Ganeti shared storage support

=============================

This document describes the changes in Ganeti 2.3+ compared to Ganeti

2.3 storage model. It also documents the ExtStorage Interface.

.. contents:: :depth: 4

.. highlight:: shell-example

Objective

=========

The aim is to introduce support for externally mirrored, shared storage.

This includes two distinct disk templates:

- A shared filesystem containing instance disks as regular files

  typically residing on a networked or cluster filesystem (e.g. NFS,

  AFS, Ceph, OCFS2, etc.).

- Instance images being shared block devices, typically LUNs residing on

  a SAN appliance.

Background

==========

DRBD is currently the only shared storage backend supported by Ganeti.

DRBD offers the advantages of high availability while running on

commodity hardware at the cost of high network I/O for block-level

synchronization between hosts. DRBD's master-slave model has greatly

influenced Ganeti's design, primarily by introducing the concept of

primary and secondary nodes and thus defining an instance's “mobility

domain”.

Although DRBD has many advantages, many sites choose to use networked

storage appliances for Virtual Machine hosting, such as SAN and/or NAS,

which provide shared storage without the administrative overhead of DRBD

nor the limitation of a 1:1 master-slave setup. Furthermore, new

distributed filesystems such as Ceph are becoming viable alternatives to

expensive storage appliances. Support for both modes of operation, i.e.

shared block storage and shared file storage backend would make Ganeti a

robust choice for high-availability virtualization clusters.

Throughout this document, the term “externally mirrored storage” will

refer to both modes of shared storage, suggesting that Ganeti does not

need to take care about the mirroring process from one host to another.

Use cases

=========

We consider the following use cases:

- A virtualization cluster with FibreChannel shared storage, mapping at

  least one LUN per instance, accessible by the whole cluster.

- A virtualization cluster with instance images stored as files on an

  NFS server.

- A virtualization cluster storing instance images on a Ceph volume.

Design Overview

===============

The design addresses the following procedures:

- Refactoring of all code referring to constants.DTS_NET_MIRROR.

- Obsolescence of the primary-secondary concept for externally mirrored

  storage.

- Introduction of a shared file storage disk template for use with networked

  filesystems.

- Introduction of a shared block device disk template with device

  adoption.

- Introduction of the External Storage Interface.

Additionally, mid- to long-term goals include:

- Support for external “storage pools”.

Refactoring of all code referring to constants.DTS_NET_MIRROR

=============================================================

Currently, all storage-related decision-making depends on a number of

frozensets in lib/constants.py, typically constants.DTS_NET_MIRROR.

However, constants.DTS_NET_MIRROR is used to signify two different

attributes:

- A storage device that is shared

- A storage device whose mirroring is supervised by Ganeti

We propose the introduction of two new frozensets to ease

decision-making:

- constants.DTS_EXT_MIRROR, holding externally mirrored disk templates

- constants.DTS_MIRRORED, being a union of constants.DTS_EXT_MIRROR and

  DTS_NET_MIRROR.

Additionally, DTS_NET_MIRROR will be renamed to DTS_INT_MIRROR to reflect

the status of the storage as internally mirrored by Ganeti.

Thus, checks could be grouped into the following categories:

- Mobility checks, like whether an instance failover or migration is

  possible should check against constants.DTS_MIRRORED

- Syncing actions should be performed only for templates in

  constants.DTS_NET_MIRROR

Obsolescence of the primary-secondary node model

================================================

The primary-secondary node concept has primarily evolved through the use

of DRBD. In a globally shared storage framework without need for

external sync (e.g. SAN, NAS, etc.), such a notion does not apply for the

following reasons:

1. Access to the storage does not necessarily imply different roles for

   the nodes (e.g. primary vs secondary).

2. The same storage is available to potentially more than 2 nodes. Thus,

   an instance backed by a SAN LUN for example may actually migrate to

   any of the other nodes and not just a pre-designated failover node.

The proposed solution is using the iallocator framework for run-time

decision making during migration and failover, for nodes with disk

templates in constants.DTS_EXT_MIRROR. Modifications to gnt-instance and

gnt-node will be required to accept target node and/or iallocator

specification for these operations. Modifications of the iallocator

protocol will be required to address at least the following needs:

- Allocation tools must be able to distinguish between internal and

  external storage

- Migration/failover decisions must take into account shared storage

  availability

Introduction of a shared file disk template

===========================================

Basic shared file storage support can be implemented by creating a new

disk template based on the existing FileStorage class, with only minor

modifications in lib/bdev.py. The shared file disk template relies on a

shared filesystem (e.g. NFS, AFS, Ceph, OCFS2 over SAN or DRBD) being

mounted on all nodes under the same path, where instance images will be

saved.

A new cluster initialization option is added to specify the mountpoint

of the shared filesystem.

The remainder of this document deals with shared block storage.

Introduction of a shared block device template

==============================================

Basic shared block device support will be implemented with an additional

disk template. This disk template will not feature any kind of storage

control (provisioning, removal, resizing, etc.), but will instead rely

on the adoption of already-existing block devices (e.g. SAN LUNs, NBD

devices, remote iSCSI targets, etc.).

The shared block device template will make the following assumptions:

- The adopted block device has a consistent name across all nodes,

  enforced e.g. via udev rules.

- The device will be available with the same path under all nodes in the

  node group.

Introduction of the External Storage Interface

==============================================

Overview

--------

To extend the shared block storage template and give Ganeti the ability

to control and manipulate external storage (provisioning, removal,

growing, etc.) we need a more generic approach. The generic method for

supporting external shared storage in Ganeti will be to have an

ExtStorage provider for each external shared storage hardware type. The

ExtStorage provider will be a set of files (executable scripts and text

files), contained inside a directory which will be named after the

provider. This directory must be present across all nodes of a nodegroup

(Ganeti doesn't replicate it), in order for the provider to be usable by

Ganeti for this nodegroup (valid). The external shared storage hardware

should also be accessible by all nodes of this nodegroup too.

An “ExtStorage provider” will have to provide the following methods:

- Create a disk

- Remove a disk

- Grow a disk

- Attach a disk to a given node

- Detach a disk from a given node

- SetInfo to a disk (add metadata)

- Verify its supported parameters

The proposed ExtStorage interface borrows heavily from the OS

interface and follows a one-script-per-function approach. An ExtStorage

provider is expected to provide the following scripts:

- ``create``

- ``remove``

- ``grow``

- ``attach``

- ``detach``

- ``setinfo``

- ``verify``

All scripts will be called with no arguments and get their input via

environment variables. A common set of variables will be exported for

all commands, and some of them might have extra ones.

``VOL_NAME``

  The name of the volume. This is unique for Ganeti and it

  uses it to refer to a specific volume inside the external storage.

``VOL_SIZE``

  The volume's size in mebibytes.

``VOL_NEW_SIZE``

  Available only to the `grow` script. It declares the

  new size of the volume after grow (in mebibytes).

``EXTP_name``

  ExtStorage parameter, where `name` is the parameter in

  upper-case (same as OS interface's ``OSP_*`` parameters).

``VOL_METADATA``

  A string containing metadata to be set for the volume.

  This is exported only to the ``setinfo`` script.

All scripts except `attach` should return 0 on success and non-zero on

error, accompanied by an appropriate error message on stderr. The

`attach` script should return a string on stdout on success, which is

the block device's full path, after it has been successfully attached to

the host node. On error it should return non-zero.

Implementation

--------------

To support the ExtStorage interface, we will introduce a new disk

template called `ext`. This template will implement the existing Ganeti

disk interface in `lib/bdev.py` (create, remove, attach, assemble,

shutdown, grow, setinfo), and will simultaneously pass control to the

external scripts to actually handle the above actions. The `ext` disk

template will act as a translation layer between the current Ganeti disk

interface and the ExtStorage providers.

We will also introduce a new IDISK_PARAM called `IDISK_PROVIDER =

provider`, which will be used at the command line to select the desired

ExtStorage provider. This parameter will be valid only for template

`ext` e.g.::

  $ gnt-instance add -t ext --disk=0:size=2G,provider=sample_provider1

The Extstorage interface will support different disks to be created by

different providers. e.g.::

  $ gnt-instance add -t ext --disk=0:size=2G,provider=sample_provider1 \

                            --disk=1:size=1G,provider=sample_provider2 \

                            --disk=2:size=3G,provider=sample_provider1

Finally, the ExtStorage interface will support passing of parameters to

the ExtStorage provider. This will also be done per disk, from the

command line::

 $ gnt-instance add -t ext --disk=0:size=1G,provider=sample_provider1,\

                                            param1=value1,param2=value2

The above parameters will be exported to the ExtStorage provider's

scripts as the enviromental variables:

- `EXTP_PARAM1 = str(value1)`

- `EXTP_PARAM2 = str(value2)`

We will also introduce a new Ganeti client called `gnt-storage` which

will be used to diagnose ExtStorage providers and show information about

them, similarly to the way  `gnt-os diagose` and `gnt-os info` handle OS

definitions.

Long-term shared storage goals

==============================

Storage pool handling

---------------------

A new cluster configuration attribute will be introduced, named

“storage_pools”, modeled as a dictionary mapping storage pools to

external storage providers (see below), e.g.::

 {

  "nas1": "foostore",

  "nas2": "foostore",

  "cloud1": "barcloud",

 }

Ganeti will not interpret the contents of this dictionary, although it

will provide methods for manipulating them under some basic constraints

(pool identifier uniqueness, driver existence). The manipulation of

storage pools will be performed by implementing new options to the

`gnt-cluster` command::

 $ gnt-cluster modify --add-pool nas1 foostore

 $ gnt-cluster modify --remove-pool nas1 # There must be no instances using

                                         # the pool to remove it

Furthermore, the storage pools will be used to indicate the availability

of storage pools to different node groups, thus specifying the

instances' “mobility domain”.

The pool, in which to put the new instance's disk, will be defined at

the command line during `instance add`. This will become possible by

replacing the IDISK_PROVIDER parameter with a new one, called `IDISK_POOL

= pool`. The cmdlib logic will then look at the cluster-level mapping

dictionary to determine the ExtStorage provider for the given pool.

gnt-storage

-----------

The ``gnt-storage`` client can be extended to support pool management

(creation/modification/deletion of pools, connection/disconnection of

pools to nodegroups, etc.). It can also be extended to diagnose and

provide information for internal disk templates too, such as lvm and

drbd.

.. vim: set textwidth=72 :