Synnefo » snf-ganeti

News

====

Version 2.5.0 beta1

-------------------

*(unreleased)*

- The default of the ``/2/instances/[instance_name]/rename`` RAPI

  resource's ``ip_check`` parameter changed from ``True`` to ``False``

  to match the underlying LUXI interface

- The ``/2/nodes/[node_name]/evacuate`` RAPI resource was changed to use

  body parameters, see :doc:`RAPI documentation <rapi>`. The server does

  not maintain backwards-compatibility as the underlying operation

  changed in an incompatible way. The RAPI client can talk to old

  servers, but it needs to be told so as the return value changed.

- When creating file-based instances via RAPI, the ``file_driver``

  parameter no longer defaults to ``loop`` and must be specified

- The deprecated "bridge" nic parameter is no longer supported. Use

  "link" instead.

- Support for the undocumented and deprecated RAPI instance creation

  request format version 0 has been dropped. Use version 1, supported

  since Ganeti 2.1.3 and :doc:`documented <rapi>`, instead.

- Pyparsing 1.4.6 or above is required, see :doc:`installation

  documentation <install>`

- The "cluster-verify" hooks are now executed per group by the

  OP_CLUSTER_VERIFY_GROUP opcode. This maintains the same behavior if

  you just run "gnt-cluster verify", which generates one op per group.

Version 2.4.3

-------------

*(unreleased)*

- Added a new parameter to instance stop/start called ``--no-remember``

  that will make the state change to not be remembered

Version 2.4.2

-------------

*(Released Thu, 12 May 2011)*

Many bug-fixes and a few new small features:

- Fixed a bug related to log opening failures

- Fixed a bug in instance listing with orphan instances

- Fixed a bug which prevented resetting the cluster-level node parameter

  ``oob_program`` to the default

- Many fixes related to the ``cluster-merge`` tool

- Fixed a race condition in the lock monitor, which caused failures

  during (at least) creation of many instances in parallel

- Improved output for gnt-job info

- Removed the quiet flag on some ssh calls which prevented debugging

  failures

- Improved the N+1 failure messages in cluster verify by actually

  showing the memory values (needed and available)

- Increased lock attempt timeouts so that when executing long operations

  (e.g. DRBD replace-disks) other jobs do not enter 'blocking acquire'

  too early and thus prevent the use of the 'fair' mechanism

- Changed instance query data (``gnt-instance info``) to not acquire

  locks unless needed, thus allowing its use on locked instance if only

  static information is asked for

- Improved behaviour with filesystems that do not support rename on an

  opened file

- Fixed the behaviour of ``prealloc_wipe_disks`` cluster parameter which

  kept locks on all nodes during the wipe, which is unneeded

- Fixed ``gnt-watcher`` handling of errors during hooks execution

- Fixed bug in ``prealloc_wipe_disks`` with small disk sizes (less than

  10GiB) which caused the wipe to fail right at the end in some cases

- Fixed master IP activation when doing master failover with no-voting

- Fixed bug in ``gnt-node add --readd`` which allowed the re-adding of

  the master node itself

- Fixed potential data-loss in under disk full conditions, where Ganeti

  wouldn't check correctly the return code and would consider

  partially-written files 'correct'

- Fixed bug related to multiple VGs and DRBD disk replacing

- Added new disk parameter ``metavg`` that allows placement of the meta

  device for DRBD in a different volume group

- Fixed error handling in the node daemon when the system libc doesn't

  have major number 6 (i.e. if ``libc.so.6`` is not the actual libc)

- Fixed lock release during replace-disks, which kept cluster-wide locks

  when doing disk replaces with an iallocator script

- Added check for missing bridges in cluster verify

- Handle EPIPE errors while writing to the terminal better, so that

  piping the output to e.g. ``less`` doesn't cause a backtrace

- Fixed rare case where a ^C during Luxi calls could have been

  interpreted as server errors, instead of simply terminating

- Fixed a race condition in LUGroupAssignNodes (``gnt-group

  assign-nodes``)

- Added a few more parameters to the KVM hypervisor, allowing a second

  CDROM, custom disk type for CDROMs and a floppy image

- Removed redundant message in instance rename when the name is given

  already as a FQDN

- Added option to ``gnt-instance recreate-disks`` to allow creating the

  disks on new nodes, allowing recreation when the original instance

  nodes are completely gone

- Added option when converting disk templates to DRBD to skip waiting

  for the resync, in order to make the instance available sooner

- Added two new variables to the OS scripts environment (containing the

  instance's nodes)

- Made the root_path and optional parameter for the xen-pvm hypervisor,

  to allow use of ``pvgrub`` as bootloader

- Changed the instance memory modifications to only check out-of-memory

  conditions on memory increases, and turned the secondary node warnings

  into errors (they can still be overridden via ``--force``)

- Fixed the handling of a corner case when the Python installation gets

  corrupted (e.g. a bad disk) while ganeti-noded is running and we try

  to execute a command that doesn't exist

- Fixed a bug in ``gnt-instance move`` (LUInstanceMove) when the primary

  node of the instance returned failures during instance shutdown; this

  adds the option ``--ignore-consistency`` to gnt-instance move

And as usual, various improvements to the error messages, documentation

and man pages.

Version 2.4.1

-------------

*(Released Wed, 09 Mar 2011)*

Emergency bug-fix release. ``tools/cfgupgrade`` was broken and overwrote

the RAPI users file if run twice (even with ``-dry-run``).

The release fixes that bug (nothing else changed).

Version 2.4.0

-------------

*(Released Mon, 07 Mar 2011)*

Final 2.4.0 release. Just a few small fixes:

- Fixed RAPI node evacuate

- Fixed the kvm-ifup script

- Fixed internal error handling for special job cases

- Updated man page to specify the escaping feature for options

Version 2.4.0 rc3

-----------------

*(Released Mon, 28 Feb 2011)*

A critical fix for the ``prealloc_wipe_disks`` feature: it is possible

that this feature wiped the disks of the wrong instance, leading to loss

of data.

Other changes:

- Fixed title of query field containing instance name

- Expanded the glossary in the documentation

- Fixed one unittest (internal issue)

Version 2.4.0 rc2

-----------------

*(Released Mon, 21 Feb 2011)*

A number of bug fixes plus just a couple functionality changes.

On the user-visible side, the ``gnt-* list`` command output has changed

with respect to "special" field states. The current rc1 style of display

can be re-enabled by passing a new ``--verbose`` (``-v``) flag, but in

the default output mode special fields states are displayed as follows:

- Offline resource: ``*``

- Unavailable/not applicable: ``-``

- Data missing (RPC failure): ``?``

- Unknown field: ``??``

Another user-visible change is the addition of ``--force-join`` to

``gnt-node add``.

As for bug fixes:

- ``tools/cluster-merge`` has seen many fixes and is now enabled again

- Fixed regression in RAPI/instance reinstall where all parameters were

  required (instead of optional)

- Fixed ``gnt-cluster repair-disk-sizes``, was broken since Ganeti 2.2

- Fixed iallocator usage (offline nodes were not considered offline)

- Fixed ``gnt-node list`` with respect to non-vm_capable nodes

- Fixed hypervisor and OS parameter validation with respect to

  non-vm_capable nodes

- Fixed ``gnt-cluster verify`` with respect to offline nodes (mostly

  cosmetic)

- Fixed ``tools/listrunner`` with respect to agent-based usage

Version 2.4.0 rc1

-----------------

*(Released Fri,  4 Feb 2011)*

Many changes and fixes since the beta1 release. While there were some

internal changes, the code has been mostly stabilised for the RC

release.

Note: the dumb allocator was removed in this release, as it was not kept

up-to-date with the IAllocator protocol changes. It is recommended to

use the ``hail`` command from the ganeti-htools package.

Note: the 2.4 and up versions of Ganeti are not compatible with the

0.2.x branch of ganeti-htools. You need to upgrade to

ganeti-htools-0.3.0 (or later).

Regressions fixed from 2.3

~~~~~~~~~~~~~~~~~~~~~~~~~~

- Fixed the ``gnt-cluster verify-disks`` command

- Made ``gnt-cluster verify-disks`` work in parallel (as opposed to

  serially on nodes)

- Fixed disk adoption breakage

- Fixed wrong headers in instance listing for field aliases

Other bugs fixed

~~~~~~~~~~~~~~~~

- Fixed corner case in KVM handling of NICs

- Fixed many cases of wrong handling of non-vm_capable nodes

- Fixed a bug where a missing instance symlink was not possible to

  recreate with any ``gnt-*`` command (now ``gnt-instance

  activate-disks`` does it)

- Fixed the volume group name as reported by ``gnt-cluster

  verify-disks``

- Increased timeouts for the import-export code, hopefully leading to

  fewer aborts due network or instance timeouts

- Fixed bug in ``gnt-node list-storage``

- Fixed bug where not all daemons were started on cluster

  initialisation, but only at the first watcher run

- Fixed many bugs in the OOB implementation

- Fixed watcher behaviour in presence of instances with offline

  secondaries

- Fixed instance list output for instances running on the wrong node

- a few fixes to the cluster-merge tool, but it still cannot merge

  multi-node groups (currently it is not recommended to use this tool)

Improvements

~~~~~~~~~~~~

- Improved network configuration for the KVM hypervisor

- Added e1000 as a supported NIC for Xen-HVM

- Improved the lvmstrap tool to also be able to use partitions, as

  opposed to full disks

- Improved speed of disk wiping (the cluster parameter

  ``prealloc_wipe_disks``, so that it has a low impact on the total time

  of instance creations

- Added documentation for the OS parameters

- Changed ``gnt-instance deactivate-disks`` so that it can work if the

  hypervisor is not responding

- Added display of blacklisted and hidden OS information in

  ``gnt-cluster info``

- Extended ``gnt-cluster verify`` to also validate hypervisor, backend,

  NIC and node parameters, which might create problems with currently

  invalid (but undetected) configuration files, but prevents validation

  failures when unrelated parameters are modified

- Changed cluster initialisation to wait for the master daemon to become

  available

- Expanded the RAPI interface:

  - Added config redistribution resource

  - Added activation/deactivation of instance disks

  - Added export of console information

- Implemented log file reopening on SIGHUP, which allows using

  logrotate(8) for the Ganeti log files

- Added a basic OOB helper script as an example

Version 2.4.0 beta1

-------------------

*(Released Fri, 14 Jan 2011)*

User-visible

~~~~~~~~~~~~

- Fixed timezone issues when formatting timestamps

- Added support for node groups, available via ``gnt-group`` and other

  commands

- Added out-of-band framework and management, see :doc:`design

  document <design-oob>`

- Removed support for roman numbers from ``gnt-node list`` and

  ``gnt-instance list``.

- Allowed modification of master network interface via ``gnt-cluster

  modify --master-netdev``

- Accept offline secondaries while shutting down instance disks

- Added ``blockdev_prefix`` parameter to Xen PVM and HVM hypervisors

- Added support for multiple LVM volume groups

- Avoid sorting nodes for ``gnt-node list`` if specific nodes are

  requested

- Added commands to list available fields:

  - ``gnt-node list-fields``

  - ``gnt-group list-fields``

  - ``gnt-instance list-fields``

- Updated documentation and man pages

Integration

~~~~~~~~~~~

- Moved ``rapi_users`` file into separate directory, now named

  ``.../ganeti/rapi/users``, ``cfgupgrade`` moves the file and creates a

  symlink

- Added new tool for running commands on many machines,

  ``tools/ganeti-listrunner``

- Implemented more verbose result in ``OpInstanceConsole`` opcode, also

  improving the ``gnt-instance console`` output

- Allowed customisation of disk index separator at ``configure`` time

- Export node group allocation policy to :doc:`iallocator <iallocator>`

- Added support for non-partitioned md disks in ``lvmstrap``

- Added script to gracefully power off KVM instances

- Split ``utils`` module into smaller parts

- Changed query operations to return more detailed information, e.g.

  whether an information is unavailable due to an offline node. To use

  this new functionality, the LUXI call ``Query`` must be used. Field

  information is now stored by the master daemon and can be retrieved

  using ``QueryFields``. Instances, nodes and groups can also be queried

  using the new opcodes ``OpQuery`` and ``OpQueryFields`` (not yet

  exposed via RAPI). The following commands make use of this

  infrastructure change:

  - ``gnt-group list``

  - ``gnt-group list-fields``

  - ``gnt-node list``

  - ``gnt-node list-fields``

  - ``gnt-instance list``

  - ``gnt-instance list-fields``

  - ``gnt-debug locks``

Remote API

~~~~~~~~~~

- New RAPI resources (see :doc:`rapi`):

  - ``/2/modify``

  - ``/2/groups``

  - ``/2/groups/[group_name]``

  - ``/2/groups/[group_name]/assign-nodes``

  - ``/2/groups/[group_name]/modify``

  - ``/2/groups/[group_name]/rename``

  - ``/2/instances/[instance_name]/disk/[disk_index]/grow``

- RAPI changes:

  - Implemented ``no_install`` for instance creation

  - Implemented OS parameters for instance reinstallation, allowing

    use of special settings on reinstallation (e.g. for preserving data)

Misc

~~~~

- Added IPv6 support in import/export

- Pause DRBD synchronization while wiping disks on instance creation

- Updated unittests and QA scripts

- Improved network parameters passed to KVM

- Converted man pages from docbook to reStructuredText

Version 2.3.1

-------------

*(Released Mon, 20 Dec 2010)*

Released version 2.3.1~rc1 without any changes.

Version 2.3.1 rc1

-----------------

*(Released Wed, 1 Dec 2010)*

- impexpd: Disable OpenSSL compression in socat if possible (backport

  from master, commit e90739d625b, see :doc:`installation guide

  <install-quick>` for details)

- Changed unittest coverage report to exclude test scripts

- Added script to check version format

Version 2.3.0

-------------

*(Released Wed, 1 Dec 2010)*

Released version 2.3.0~rc1 without any changes.

Version 2.3.0 rc1

-----------------

*(Released Fri, 19 Nov 2010)*

A number of bugfixes and documentation updates:

- Update ganeti-os-interface documentation

- Fixed a bug related to duplicate MACs or similar items which should be

  unique

- Fix breakage in OS state modify

- Reinstall instance: disallow offline secondaries (fixes bug related to

  OS changing but reinstall failing)

- plus all the other fixes between 2.2.1 and 2.2.2

Version 2.3.0 rc0

-----------------

*(Released Tue, 2 Nov 2010)*

- Fixed clearing of the default iallocator using ``gnt-cluster modify``

- Fixed master failover race with watcher

- Fixed a bug in ``gnt-node modify`` which could lead to an inconsistent

  configuration

- Accept previously stopped instance for export with instance removal

- Simplify and extend the environment variables for instance OS scripts

- Added new node flags, ``master_capable`` and ``vm_capable``

- Added optional instance disk wiping prior during allocation. This is a

  cluster-wide option and can be set/modified using

  ``gnt-cluster {init,modify} --prealloc-wipe-disks``.

- Added IPv6 support, see :doc:`design document <design-2.3>` and

  :doc:`install-quick`

- Added a new watcher option (``--ignore-pause``)

- Added option to ignore offline node on instance start/stop

  (``--ignore-offline``)

- Allow overriding OS parameters with ``gnt-instance reinstall``

- Added ability to change node's secondary IP address using ``gnt-node

  modify``

- Implemented privilege separation for all daemons except

  ``ganeti-noded``, see ``configure`` options

- Complain if an instance's disk is marked faulty in ``gnt-cluster

  verify``

- Implemented job priorities (see ``ganeti(7)`` manpage)

- Ignore failures while shutting down instances during failover from

  offline node

- Exit daemon's bootstrap process only once daemon is ready

- Export more information via ``LUInstanceQuery``/remote API

- Improved documentation, QA and unittests

- RAPI daemon now watches ``rapi_users`` all the time and doesn't need a

  restart if the file was created or changed

- Added LUXI protocol version sent with each request and response,

  allowing detection of server/client mismatches

- Moved the Python scripts among gnt-* and ganeti-* into modules

- Moved all code related to setting up SSH to an external script,

  ``setup-ssh``

- Infrastructure changes for node group support in future versions

Version 2.2.2

-------------

*(Released Fri, 19 Nov 2010)*

A few small bugs fixed, and some improvements to the build system:

- Fix documentation regarding conversion to drbd

- Fix validation of parameters in cluster modify (``gnt-cluster modify

  -B``)

- Fix error handling in node modify with multiple changes

- Allow remote imports without checked names

Version 2.2.1

-------------

*(Released Tue, 19 Oct 2010)*

- Disable SSL session ID cache in RPC client

Version 2.2.1 rc1

-----------------

*(Released Thu, 14 Oct 2010)*

- Fix interaction between Curl/GnuTLS and the Python's HTTP server

  (thanks Apollon Oikonomopoulos!), finally allowing the use of Curl

  with GnuTLS

- Fix problems with interaction between Curl and Python's HTTP server,

  resulting in increased speed in many RPC calls

- Improve our release script to prevent breakage with older aclocal and

  Python 2.6

Version 2.2.1 rc0

-----------------

*(Released Thu, 7 Oct 2010)*

- Fixed issue 125, replace hardcoded "xenvg" in ``gnt-cluster`` with

  value retrieved from master

- Added support for blacklisted or hidden OS definitions

- Added simple lock monitor (accessible via (``gnt-debug locks``)

- Added support for -mem-path in KVM hypervisor abstraction layer

- Allow overriding instance parameters in tool for inter-cluster

  instance moves (``tools/move-instance``)

- Improved opcode summaries (e.g. in ``gnt-job list``)

- Improve consistency of OS listing by sorting it

- Documentation updates

Version 2.2.0.1

---------------

*(Released Fri, 8 Oct 2010)*

- Rebuild with a newer autotools version, to fix python 2.6 compatibility

Version 2.2.0

-------------

*(Released Mon, 4 Oct 2010)*

- Fixed regression in ``gnt-instance rename``

Version 2.2.0 rc2

-----------------

*(Released Wed, 22 Sep 2010)*

- Fixed OS_VARIANT variable for OS scripts

- Fixed cluster tag operations via RAPI

- Made ``setup-ssh`` exit with non-zero code if an error occurred

- Disabled RAPI CA checks in watcher

Version 2.2.0 rc1

-----------------

*(Released Mon, 23 Aug 2010)*

- Support DRBD versions of the format "a.b.c.d"

- Updated manpages

- Re-introduce support for usage from multiple threads in RAPI client

- Instance renames and modify via RAPI

- Work around race condition between processing and archival in job

  queue

- Mark opcodes following failed one as failed, too

- Job field ``lock_status`` was removed due to difficulties making it

  work with the changed job queue in Ganeti 2.2; a better way to monitor

  locks is expected for a later 2.2.x release

- Fixed dry-run behaviour with many commands

- Support ``ssh-agent`` again when adding nodes

- Many additional bugfixes

Version 2.2.0 rc0

-----------------

*(Released Fri, 30 Jul 2010)*

Important change: the internal RPC mechanism between Ganeti nodes has

changed from using a home-grown http library (based on the Python base

libraries) to use the PycURL library. This requires that PycURL is

installed on nodes. Please note that on Debian/Ubuntu, PycURL is linked

against GnuTLS by default. cURL's support for GnuTLS had known issues

before cURL 7.21.0 and we recommend using the latest cURL release or

linking against OpenSSL. Most other distributions already link PycURL

and cURL against OpenSSL. The command::

  python -c 'import pycurl; print pycurl.version'

can be used to determine the libraries PycURL and cURL are linked

against.

Other significant changes:

- Rewrote much of the internals of the job queue, in order to achieve

  better parallelism; this decouples job query operations from the job

  processing, and it should allow much nicer behaviour of the master

  daemon under load, and it also has uncovered some long-standing bugs

  related to the job serialisation (now fixed)

- Added a default iallocator setting to the cluster parameters,

  eliminating the need to always pass nodes or an iallocator for

  operations that require selection of new node(s)

- Added experimental support for the LXC virtualization method

- Added support for OS parameters, which allows the installation of

  instances to pass parameter to OS scripts in order to customise the

  instance

- Added a hypervisor parameter controlling the migration type (live or

  non-live), since hypervisors have various levels of reliability; this

  has renamed the 'live' parameter to 'mode'

- Added a cluster parameter ``reserved_lvs`` that denotes reserved

  logical volumes, meaning that cluster verify will ignore them and not

  flag their presence as errors

- The watcher will now reset the error count for failed instances after

  8 hours, thus allowing self-healing if the problem that caused the

  instances to be down/fail to start has cleared in the meantime

- Added a cluster parameter ``drbd_usermode_helper`` that makes Ganeti

  check for, and warn, if the drbd module parameter ``usermode_helper``

  is not consistent with the cluster-wide setting; this is needed to

  make diagnose easier of failed drbd creations

- Started adding base IPv6 support, but this is not yet

  enabled/available for use

- Rename operations (cluster, instance) will now return the new name,

  which is especially useful if a short name was passed in

- Added support for instance migration in RAPI

- Added a tool to pre-configure nodes for the SSH setup, before joining

  them to the cluster; this will allow in the future a simplified model

  for node joining (but not yet fully enabled in 2.2); this needs the

  paramiko python library

- Fixed handling of name-resolving errors

- Fixed consistency of job results on the error path

- Fixed master-failover race condition when executed multiple times in

  sequence

- Fixed many bugs related to the job queue (mostly introduced during the

  2.2 development cycle, so not all are impacting 2.1)

- Fixed instance migration with missing disk symlinks

- Fixed handling of unknown jobs in ``gnt-job archive``

- And many other small fixes/improvements

Internal changes:

- Enhanced both the unittest and the QA coverage

- Switched the opcode validation to a generic model, and extended the

  validation to all opcode parameters

- Changed more parts of the code that write shell scripts to use the

  same class for this

- Switched the master daemon to use the asyncore library for the Luxi

  server endpoint

Version 2.2.0 beta 0

--------------------

*(Released Thu, 17 Jun 2010)*

- Added tool (``move-instance``) and infrastructure to move instances

  between separate clusters (see :doc:`separate documentation

  <move-instance>` and :doc:`design document <design-2.2>`)

- Added per-request RPC timeout

- RAPI now requires a Content-Type header for requests with a body (e.g.

  ``PUT`` or ``POST``) which must be set to ``application/json`` (see

  :rfc:`2616` (HTTP/1.1), section 7.2.1)

- ``ganeti-watcher`` attempts to restart ``ganeti-rapi`` if RAPI is not

  reachable

- Implemented initial support for running Ganeti daemons as separate

  users, see configure-time flags ``--with-user-prefix`` and

  ``--with-group-prefix`` (only ``ganeti-rapi`` is supported at this

  time)

- Instances can be removed after export (``gnt-backup export

  --remove-instance``)

- Self-signed certificates generated by Ganeti now use a 2048 bit RSA

  key (instead of 1024 bit)

- Added new cluster configuration file for cluster domain secret

- Import/export now use SSL instead of SSH

- Added support for showing estimated time when exporting an instance,

  see the ``ganeti-os-interface(7)`` manpage and look for

  ``EXP_SIZE_FD``

Version 2.1.8

-------------

*(Released Tue, 16 Nov 2010)*

Some more bugfixes. Unless critical bugs occur, this will be the last

2.1 release:

- Fix case of MAC special-values

- Fix mac checker regex

- backend: Fix typo causing "out of range" error

- Add missing --units in gnt-instance list man page

Version 2.1.7

-------------

*(Released Tue, 24 Aug 2010)*

Bugfixes only:

  - Don't ignore secondary node silently on non-mirrored disk templates

    (issue 113)

  - Fix --master-netdev arg name in gnt-cluster(8) (issue 114)

  - Fix usb_mouse parameter breaking with vnc_console (issue 109)

  - Properly document the usb_mouse parameter

  - Fix path in ganeti-rapi(8) (issue 116)

  - Adjust error message when the ganeti user's .ssh directory is

    missing

  - Add same-node-check when changing the disk template to drbd

Version 2.1.6

-------------

*(Released Fri, 16 Jul 2010)*

Bugfixes only:

  - Add an option to only select some reboot types during qa/burnin.

    (on some hypervisors consequent reboots are not supported)

  - Fix infrequent race condition in master failover. Sometimes the old

    master ip address would be still detected as up for a short time

    after it was removed, causing failover to fail.

  - Decrease mlockall warnings when the ctypes module is missing. On

    Python 2.4 we support running even if no ctypes module is installed,

    but we were too verbose about this issue.

  - Fix building on old distributions, on which man doesn't have a

    --warnings option.

  - Fix RAPI not to ignore the MAC address on instance creation

  - Implement the old instance creation format in the RAPI client.

Version 2.1.5

-------------

*(Released Thu, 01 Jul 2010)*

A small bugfix release:

  - Fix disk adoption: broken by strict --disk option checking in 2.1.4

  - Fix batch-create: broken in the whole 2.1 series due to a lookup on

    a non-existing option

  - Fix instance create: the --force-variant option was ignored

  - Improve pylint 0.21 compatibility and warnings with Python 2.6

  - Fix modify node storage with non-FQDN arguments

  - Fix RAPI client to authenticate under Python 2.6 when used

    for more than 5 requests needing authentication

  - Fix gnt-instance modify -t (storage) giving a wrong error message

    when converting a non-shutdown drbd instance to plain

Version 2.1.4

-------------

*(Released Fri, 18 Jun 2010)*

A small bugfix release:

  - Fix live migration of KVM instances started with older Ganeti

    versions which had fewer hypervisor parameters

  - Fix gnt-instance grow-disk on down instances

  - Fix an error-reporting bug during instance migration

  - Better checking of the ``--net`` and ``--disk`` values, to avoid

    silently ignoring broken ones

  - Fix an RPC error reporting bug affecting, for example, RAPI client

    users

  - Fix bug triggered by different API version os-es on different nodes

  - Fix a bug in instance startup with custom hvparams: OS level

    parameters would fail to be applied.

  - Fix the RAPI client under Python 2.6 (but more work is needed to

    make it work completely well with OpenSSL)

  - Fix handling of errors when resolving names from DNS

Version 2.1.3

-------------

*(Released Thu, 3 Jun 2010)*

A medium sized development cycle. Some new features, and some

fixes/small improvements/cleanups.

Significant features

~~~~~~~~~~~~~~~~~~~~

The node deamon now tries to mlock itself into memory, unless the

``--no-mlock`` flag is passed. It also doesn't fail if it can't write

its logs, and falls back to console logging. This allows emergency

features such as ``gnt-node powercycle`` to work even in the event of a

broken node disk (tested offlining the disk hosting the node's

filesystem and dropping its memory caches; don't try this at home)

KVM: add vhost-net acceleration support. It can be tested with a new

enough version of the kernel and of qemu-kvm.

KVM: Add instance chrooting feature. If you use privilege dropping for

your VMs you can also now force them to chroot to an empty directory,

before starting the emulated guest.

KVM: Add maximum migration bandwith and maximum downtime tweaking

support (requires a new-enough version of qemu-kvm).

Cluster verify will now warn if the master node doesn't have the master

ip configured on it.

Add a new (incompatible) instance creation request format to RAPI which

supports all parameters (previously only a subset was supported, and it

wasn't possible to extend the old format to accomodate all the new

features. The old format is still supported, and a client can check for

this feature, before using it, by checking for its presence in the

``features`` RAPI resource.

Now with ancient latin support. Try it passing the ``--roman`` option to

``gnt-instance info``, ``gnt-cluster info`` or ``gnt-node list``

(requires the python-roman module to be installed, in order to work).

Other changes

~~~~~~~~~~~~~

As usual many internal code refactorings, documentation updates, and

such. Among others:

  - Lots of improvements and cleanups to the experimental Remote API

    (RAPI) client library.

  - A new unit test suite for the core daemon libraries.

  - A fix to creating missing directories makes sure the umask is not

    applied anymore. This enforces the same directory permissions

    everywhere.

  - Better handling terminating daemons with ctrl+c (used when running

    them in debugging mode).

  - Fix a race condition in live migrating a KVM instance, when stat()

    on the old proc status file returned EINVAL, which is an unexpected

    value.

  - Fixed manpage checking with newer man and utf-8 charachters. But now

    you need the en_US.UTF-8 locale enabled to build Ganeti from git.

Version 2.1.2.1

---------------

*(Released Fri, 7 May 2010)*

Fix a bug which prevented untagged KVM instances from starting.

Version 2.1.2

-------------

*(Released Fri, 7 May 2010)*

Another release with a long development cycle, during which many

different features were added.

Significant features

~~~~~~~~~~~~~~~~~~~~

The KVM hypervisor now can run the individual instances as non-root, to

reduce the impact of a VM being hijacked due to bugs in the

hypervisor. It is possible to run all instances as a single (non-root)

user, to manually specify a user for each instance, or to dynamically

allocate a user out of a cluster-wide pool to each instance, with the

guarantee that no two instances will run under the same user ID on any

given node.

An experimental RAPI client library, that can be used standalone

(without the other Ganeti libraries), is provided in the source tree as

``lib/rapi/client.py``. Note this client might change its interface in

the future, as we iterate on its capabilities.

A new command, ``gnt-cluster renew-crypto`` has been added to easily

replace the cluster's certificates and crypto keys. This might help in

case they have been compromised, or have simply expired.

A new disk option for instance creation has been added that allows one

to "adopt" currently existing logical volumes, with data

preservation. This should allow easier migration to Ganeti from

unmanaged (or managed via other software) instances.

Another disk improvement is the possibility to convert between redundant

(DRBD) and plain (LVM) disk configuration for an instance. This should

allow better scalability (starting with one node and growing the

cluster, or shrinking a two-node cluster to one node).

A new feature that could help with automated node failovers has been

implemented: if a node sees itself as offline (by querying the master

candidates), it will try to shutdown (hard) all instances and any active

DRBD devices. This reduces the risk of duplicate instances if an

external script automatically failovers the instances on such nodes. To

enable this, the cluster parameter ``maintain_node_health`` should be

enabled; in the future this option (per the name) will enable other

automatic maintenance features.

Instance export/import now will reuse the original instance

specifications for all parameters; that means exporting an instance,

deleting it and the importing it back should give an almost identical

instance. Note that the default import behaviour has changed from

before, where it created only one NIC; now it recreates the original

number of NICs.

Cluster verify has added a few new checks: SSL certificates validity,

/etc/hosts consistency across the cluster, etc.

Other changes

~~~~~~~~~~~~~

As usual, many internal changes were done, documentation fixes,

etc. Among others:

- Fixed cluster initialization with disabled cluster storage (regression

  introduced in 2.1.1)

- File-based storage supports growing the disks

- Fixed behaviour of node role changes

- Fixed cluster verify for some corner cases, plus a general rewrite of

  cluster verify to allow future extension with more checks

- Fixed log spamming by watcher and node daemon (regression introduced

  in 2.1.1)

- Fixed possible validation issues when changing the list of enabled

  hypervisors

- Fixed cleanup of /etc/hosts during node removal

- Fixed RAPI response for invalid methods

- Fixed bug with hashed passwords in ``ganeti-rapi`` daemon

- Multiple small improvements to the KVM hypervisor (VNC usage, booting

  from ide disks, etc.)

- Allow OS changes without re-installation (to record a changed OS

  outside of Ganeti, or to allow OS renames)

- Allow instance creation without OS installation (useful for example if

  the OS will be installed manually, or restored from a backup not in

  Ganeti format)

- Implemented option to make cluster ``copyfile`` use the replication

  network

- Added list of enabled hypervisors to ssconf (possibly useful for

  external scripts)

- Added a new tool (``tools/cfgupgrade12``) that allows upgrading from

  1.2 clusters

- A partial form of node re-IP is possible via node readd, which now

  allows changed node primary IP

- Command line utilities now show an informational message if the job is

  waiting for a lock

- The logs of the master daemon now show the PID/UID/GID of the

  connected client

Version 2.1.1

-------------

*(Released Fri, 12 Mar 2010)*

During the 2.1.0 long release candidate cycle, a lot of improvements and

changes have accumulated with were released later as 2.1.1.

Major changes

~~~~~~~~~~~~~

The node evacuate command (``gnt-node evacuate``) was significantly

rewritten, and as such the IAllocator protocol was changed - a new

request type has been added. This unfortunate change during a stable

series is designed to improve performance of node evacuations; on

clusters with more than about five nodes and which are well-balanced,

evacuation should proceed in parallel for all instances of the node

being evacuated. As such, any existing IAllocator scripts need to be

updated, otherwise the above command will fail due to the unknown

request. The provided "dumb" allocator has not been updated; but the

ganeti-htools package supports the new protocol since version 0.2.4.

Another important change is increased validation of node and instance

names. This might create problems in special cases, if invalid host

names are being used.

Also, a new layer of hypervisor parameters has been added, that sits at

OS level between the cluster defaults and the instance ones. This allows

customisation of virtualization parameters depending on the installed

OS. For example instances with OS 'X' may have a different KVM kernel

(or any other parameter) than the cluster defaults. This is intended to

help managing a multiple OSes on the same cluster, without manual

modification of each instance's parameters.

A tool for merging clusters, ``cluster-merge``, has been added in the

tools sub-directory.

Bug fixes

~~~~~~~~~

- Improved the int/float conversions that should make the code more

  robust in face of errors from the node daemons

- Fixed the remove node code in case of internal configuration errors

- Fixed the node daemon behaviour in face of inconsistent queue

  directory (e.g. read-only file-system where we can't open the files

  read-write, etc.)

- Fixed the behaviour of gnt-node modify for master candidate demotion;

  now it either aborts cleanly or, if given the new "auto_promote"

  parameter, will automatically promote other nodes as needed

- Fixed compatibility with (unreleased yet) Python 2.6.5 that would

  completely prevent Ganeti from working

- Fixed bug for instance export when not all disks were successfully

  exported

- Fixed behaviour of node add when the new node is slow in starting up

  the node daemon

- Fixed handling of signals in the LUXI client, which should improve

  behaviour of command-line scripts

- Added checks for invalid node/instance names in the configuration (now

  flagged during cluster verify)

- Fixed watcher behaviour for disk activation errors

- Fixed two potentially endless loops in http library, which led to the

  RAPI daemon hanging and consuming 100% CPU in some cases

- Fixed bug in RAPI daemon related to hashed passwords

- Fixed bug for unintended qemu-level bridging of multi-NIC KVM

  instances

- Enhanced compatibility with non-Debian OSes, but not using absolute

  path in some commands and allowing customisation of the ssh

  configuration directory

- Fixed possible future issue with new Python versions by abiding to the

  proper use of ``__slots__`` attribute on classes

- Added checks that should prevent directory traversal attacks

- Many documentation fixes based on feedback from users

New features

~~~~~~~~~~~~

- Added an "early_release" more for instance replace disks and node

  evacuate, where we release locks earlier and thus allow higher

  parallelism within the cluster

- Added watcher hooks, intended to allow the watcher to restart other

  daemons (e.g. from the ganeti-nbma project), but they can be used of

  course for any other purpose

- Added a compile-time disable for DRBD barriers, to increase

  performance if the administrator trusts the power supply or the

  storage system to not lose writes

- Added the option of using syslog for logging instead of, or in

  addition to, Ganeti's own log files

- Removed boot restriction for paravirtual NICs for KVM, recent versions

  can indeed boot from a paravirtual NIC

- Added a generic debug level for many operations; while this is not

  used widely yet, it allows one to pass the debug value all the way to

  the OS scripts

- Enhanced the hooks environment for instance moves (failovers,

  migrations) where the primary/secondary nodes changed during the

  operation, by adding {NEW,OLD}_{PRIMARY,SECONDARY} vars

- Enhanced data validations for many user-supplied values; one important

  item is the restrictions imposed on instance and node names, which

  might reject some (invalid) host names

- Add a configure-time option to disable file-based storage, if it's not

  needed; this allows greater security separation between the master

  node and the other nodes from the point of view of the inter-node RPC

  protocol

- Added user notification in interactive tools if job is waiting in the

  job queue or trying to acquire locks

- Added log messages when a job is waiting for locks

- Added filtering by node tags in instance operations which admit

  multiple instances (start, stop, reboot, reinstall)

- Added a new tool for cluster mergers, ``cluster-merge``

- Parameters from command line which are of the form ``a=b,c=d`` can now

  use backslash escapes to pass in values which contain commas,

  e.g. ``a=b\\c,d=e`` where the 'a' parameter would get the value

  ``b,c``

- For KVM, the instance name is the first parameter passed to KVM, so

  that it's more visible in the process list

Version 2.1.0

-------------

*(Released Tue, 2 Mar 2010)*

Ganeti 2.1 brings many improvements with it. Major changes:

- Added infrastructure to ease automated disk repairs

- Added new daemon to export configuration data in a cheaper way than

  using the remote API

- Instance NICs can now be routed instead of being associated with a

  networking bridge

- Improved job locking logic to reduce impact of jobs acquiring multiple

  locks waiting for other long-running jobs

In-depth implementation details can be found in the Ganeti 2.1 design

document.

Details

~~~~~~~

- Added chroot hypervisor

- Added more options to xen-hvm hypervisor (``kernel_path`` and

  ``device_model``)

- Added more options to xen-pvm hypervisor (``use_bootloader``,

  ``bootloader_path`` and ``bootloader_args``)

- Added the ``use_localtime`` option for the xen-hvm and kvm

  hypervisors, and the default value for this has changed to false (in

  2.0 xen-hvm always enabled it)

- Added luxi call to submit multiple jobs in one go

- Added cluster initialization option to not modify ``/etc/hosts``

  file on nodes

- Added network interface parameters

- Added dry run mode to some LUs

- Added RAPI resources:

  - ``/2/instances/[instance_name]/info``

  - ``/2/instances/[instance_name]/replace-disks``

  - ``/2/nodes/[node_name]/evacuate``

  - ``/2/nodes/[node_name]/migrate``

  - ``/2/nodes/[node_name]/role``

  - ``/2/nodes/[node_name]/storage``

  - ``/2/nodes/[node_name]/storage/modify``

  - ``/2/nodes/[node_name]/storage/repair``

- Added OpCodes to evacuate or migrate all instances on a node

- Added new command to list storage elements on nodes (``gnt-node

  list-storage``) and modify them (``gnt-node modify-storage``)

- Added new ssconf files with master candidate IP address

  (``ssconf_master_candidates_ips``), node primary IP address

  (``ssconf_node_primary_ips``) and node secondary IP address

  (``ssconf_node_secondary_ips``)

- Added ``ganeti-confd`` and a client library to query the Ganeti

  configuration via UDP

- Added ability to run hooks after cluster initialization and before

  cluster destruction

- Added automatic mode for disk replace (``gnt-instance replace-disks

  --auto``)

- Added ``gnt-instance recreate-disks`` to re-create (empty) disks

  after catastrophic data-loss

- Added ``gnt-node repair-storage`` command to repair damaged LVM volume

  groups

- Added ``gnt-instance move`` command to move instances

- Added ``gnt-cluster watcher`` command to control watcher

- Added ``gnt-node powercycle`` command to powercycle nodes

- Added new job status field ``lock_status``

- Added parseable error codes to cluster verification (``gnt-cluster

  verify --error-codes``) and made output less verbose (use

  ``--verbose`` to restore previous behaviour)

- Added UUIDs to the main config entities (cluster, nodes, instances)

- Added support for OS variants

- Added support for hashed passwords in the Ganeti remote API users file

  (``rapi_users``)

- Added option to specify maximum timeout on instance shutdown

- Added ``--no-ssh-init`` option to ``gnt-cluster init``

- Added new helper script to start and stop Ganeti daemons

  (``daemon-util``), with the intent to reduce the work necessary to

  adjust Ganeti for non-Debian distributions and to start/stop daemons

  from one place

- Added more unittests

- Fixed critical bug in ganeti-masterd startup

- Removed the configure-time ``kvm-migration-port`` parameter, this is

  now customisable at the cluster level for both the KVM and Xen

  hypervisors using the new ``migration_port`` parameter

- Pass ``INSTANCE_REINSTALL`` variable to OS installation script when

  reinstalling an instance

- Allowed ``@`` in tag names

- Migrated to Sphinx (http://sphinx.pocoo.org/) for documentation

- Many documentation updates

- Distribute hypervisor files on ``gnt-cluster redist-conf``

- ``gnt-instance reinstall`` can now reinstall multiple instances

- Updated many command line parameters

- Introduced new OS API version 15

- No longer support a default hypervisor

- Treat virtual LVs as inexistent

- Improved job locking logic to reduce lock contention

- Match instance and node names case insensitively

- Reimplemented bash completion script to be more complete

- Improved burnin

Version 2.0.6

-------------

*(Released Thu, 4 Feb 2010)*

- Fix cleaner behaviour on nodes not in a cluster (Debian bug 568105)

- Fix a string formatting bug

- Improve safety of the code in some error paths

- Improve data validation in the master of values returned from nodes

Version 2.0.5

-------------

*(Released Thu, 17 Dec 2009)*

- Fix security issue due to missing validation of iallocator names; this

  allows local and remote execution of arbitrary executables

- Fix failure of gnt-node list during instance removal

- Ship the RAPI documentation in the archive

Version 2.0.4

-------------

*(Released Wed, 30 Sep 2009)*

- Fixed many wrong messages

- Fixed a few bugs related to the locking library

- Fixed MAC checking at instance creation time

- Fixed a DRBD parsing bug related to gaps in /proc/drbd

- Fixed a few issues related to signal handling in both daemons and

  scripts

- Fixed the example startup script provided

- Fixed insserv dependencies in the example startup script (patch from

  Debian)

- Fixed handling of drained nodes in the iallocator framework

- Fixed handling of KERNEL_PATH parameter for xen-hvm (Debian bug

  #528618)

- Fixed error related to invalid job IDs in job polling

- Fixed job/opcode persistence on unclean master shutdown

- Fixed handling of partial job processing after unclean master

  shutdown

- Fixed error reporting from LUs, previously all errors were converted

  into execution errors

- Fixed error reporting from burnin

- Decreased significantly the memory usage of the job queue

- Optimised slightly multi-job submission

- Optimised slightly opcode loading

- Backported the multi-job submit framework from the development

  branch; multi-instance start and stop should be faster

- Added script to clean archived jobs after 21 days; this will reduce

  the size of the queue directory

- Added some extra checks in disk size tracking

- Added an example ethers hook script

- Added a cluster parameter that prevents Ganeti from modifying of

  /etc/hosts

- Added more node information to RAPI responses

- Added a ``gnt-job watch`` command that allows following the ouput of a

  job

- Added a bind-address option to ganeti-rapi

- Added more checks to the configuration verify

- Enhanced the burnin script such that some operations can be retried

  automatically

- Converted instance reinstall to multi-instance model

Version 2.0.3

-------------

*(Released Fri, 7 Aug 2009)*

- Added ``--ignore-size`` to the ``gnt-instance activate-disks`` command

  to allow using the pre-2.0.2 behaviour in activation, if any existing

  instances have mismatched disk sizes in the configuration

- Added ``gnt-cluster repair-disk-sizes`` command to check and update

  any configuration mismatches for disk sizes

- Added ``gnt-master cluste-failover --no-voting`` to allow master

  failover to work on two-node clusters

- Fixed the ``--net`` option of ``gnt-backup import``, which was

  unusable

- Fixed detection of OS script errors in ``gnt-backup export``

- Fixed exit code of ``gnt-backup export``

Version 2.0.2

-------------

*(Released Fri, 17 Jul 2009)*

- Added experimental support for stripped logical volumes; this should

  enhance performance but comes with a higher complexity in the block

  device handling; stripping is only enabled when passing

  ``--with-lvm-stripecount=N`` to ``configure``, but codepaths are

  affected even in the non-stripped mode

- Improved resiliency against transient failures at the end of DRBD

  resyncs, and in general of DRBD resync checks

- Fixed a couple of issues with exports and snapshot errors

- Fixed a couple of issues in instance listing

- Added display of the disk size in ``gnt-instance info``

- Fixed checking for valid OSes in instance creation

- Fixed handling of the "vcpus" parameter in instance listing and in

  general of invalid parameters

- Fixed http server library, and thus RAPI, to handle invalid

  username/password combinations correctly; this means that now they

  report unauthorized for queries too, not only for modifications,

  allowing earlier detect of configuration problems

- Added a new "role" node list field, equivalent to the master/master

  candidate/drained/offline flags combinations

- Fixed cluster modify and changes of candidate pool size

- Fixed cluster verify error messages for wrong files on regular nodes

- Fixed a couple of issues with node demotion from master candidate role

- Fixed node readd issues

- Added non-interactive mode for ``ganeti-masterd --no-voting`` startup

- Added a new ``--no-voting`` option for masterfailover to fix failover

  on two-nodes clusters when the former master node is unreachable

- Added instance reinstall over RAPI

Version 2.0.1

-------------

*(Released Tue, 16 Jun 2009)*

- added ``-H``/``-B`` startup parameters to ``gnt-instance``, which will

  allow re-adding the start in single-user option (regression from 1.2)

- the watcher writes the instance status to a file, to allow monitoring

  to report the instance status (from the master) based on cached

  results of the watcher's queries; while this can get stale if the

  watcher is being locked due to other work on the cluster, this is

  still an improvement

- the watcher now also restarts the node daemon and the rapi daemon if

  they died

- fixed the watcher to handle full and drained queue cases

- hooks export more instance data in the environment, which helps if

  hook scripts need to take action based on the instance's properties

  (no longer need to query back into ganeti)

- instance failovers when the instance is stopped do not check for free

  RAM, so that failing over a stopped instance is possible in low memory

  situations

- rapi uses queries for tags instead of jobs (for less job traffic), and

  for cluster tags it won't talk to masterd at all but read them from

  ssconf

- a couple of error handling fixes in RAPI

- drbd handling: improved the error handling of inconsistent disks after

  resync to reduce the frequency of "there are some degraded disks for

  this instance" messages

- fixed a bug in live migration when DRBD doesn't want to reconnect (the

  error handling path called a wrong function name)

Version 2.0.0 final

-------------------

*(Released Wed, 27 May 2009)*

- no changes from rc5

Version 2.0 release candidate 5

-------------------------------

*(Released Wed, 20 May 2009)*

- fix a couple of bugs (validation, argument checks)

- fix ``gnt-cluster getmaster`` on non-master nodes (regression)

- some small improvements to RAPI and IAllocator

- make watcher automatically start the master daemon if down

Version 2.0 release candidate 4

-------------------------------

*(Released Mon, 27 Apr 2009)*

- change the OS list to not require locks; this helps with big clusters

- fix ``gnt-cluster verify`` and ``gnt-cluster verify-disks`` when the

  volume group is broken

- ``gnt-instance info``, without any arguments, doesn't run for all

  instances anymore; either pass ``--all`` or pass the desired

  instances; this helps against mistakes on big clusters where listing

  the information for all instances takes a long time

- miscellaneous doc and man pages fixes

Version 2.0 release candidate 3

-------------------------------

*(Released Wed, 8 Apr 2009)*

- Change the internal locking model of some ``gnt-node`` commands, in

  order to reduce contention (and blocking of master daemon) when

  batching many creation/reinstall jobs

- Fixes to Xen soft reboot

- No longer build documentation at build time, instead distribute it in

  the archive, in order to reduce the need for the whole docbook/rst

  toolchains

Version 2.0 release candidate 2

-------------------------------

*(Released Fri, 27 Mar 2009)*

- Now the cfgupgrade scripts works and can upgrade 1.2.7 clusters to 2.0

- Fix watcher startup sequence, improves the behaviour of busy clusters

- Some other fixes in ``gnt-cluster verify``, ``gnt-instance

  replace-disks``, ``gnt-instance add``, ``gnt-cluster queue``, KVM VNC

  bind address and other places

- Some documentation fixes and updates

Version 2.0 release candidate 1

-------------------------------

*(Released Mon, 2 Mar 2009)*

- More documentation updates, now all docs should be more-or-less

  up-to-date

- A couple of small fixes (mixed hypervisor clusters, offline nodes,

  etc.)

- Added a customizable HV_KERNEL_ARGS hypervisor parameter (for Xen PVM

  and KVM)

- Fix an issue related to $libdir/run/ganeti and cluster creation

Version 2.0 beta 2

------------------

*(Released Thu, 19 Feb 2009)*

- Xen PVM and KVM have switched the default value for the instance root

  disk to the first partition on the first drive, instead of the whole

  drive; this means that the OS installation scripts must be changed

  accordingly

- Man pages have been updated

- RAPI has been switched by default to HTTPS, and the exported functions

  should all work correctly

- RAPI v1 has been removed

- Many improvements to the KVM hypervisor

- Block device errors are now better reported

- Many other bugfixes and small improvements

Version 2.0 beta 1

------------------

*(Released Mon, 26 Jan 2009)*

- Version 2 is a general rewrite of the code and therefore the

  differences are too many to list, see the design document for 2.0 in

  the ``doc/`` subdirectory for more details

- In this beta version there is not yet a migration path from 1.2 (there

  will be one in the final 2.0 release)

- A few significant changes are:

  - all commands are executed by a daemon (``ganeti-masterd``) and the

    various ``gnt-*`` commands are just front-ends to it

  - all the commands are entered into, and executed from a job queue,

    see the ``gnt-job(8)`` manpage

  - the RAPI daemon supports read-write operations, secured by basic

    HTTP authentication on top of HTTPS

  - DRBD version 0.7 support has been removed, DRBD 8 is the only

    supported version (when migrating from Ganeti 1.2 to 2.0, you need

    to migrate to DRBD 8 first while still running Ganeti 1.2)

  - DRBD devices are using statically allocated minor numbers, which

    will be assigned to existing instances during the migration process

  - there is support for both Xen PVM and Xen HVM instances running on

    the same cluster

  - KVM virtualization is supported too

  - file-based storage has been implemented, which means that it is

    possible to run the cluster without LVM and DRBD storage, for

    example using a shared filesystem exported from shared storage (and

    still have live migration)

Version 1.2.7

-------------

*(Released Tue, 13 Jan 2009)*

- Change the default reboot type in ``gnt-instance reboot`` to "hard"

- Reuse the old instance mac address by default on instance import, if

  the instance name is the same.

- Handle situations in which the node info rpc returns incomplete

  results (issue 46)

- Add checks for tcp/udp ports collisions in ``gnt-cluster verify``

- Improved version of batcher:

  - state file support

  - instance mac address support

  - support for HVM clusters/instances

- Add an option to show the number of cpu sockets and nodes in

  ``gnt-node list``

- Support OSes that handle more than one version of the OS api (but do

  not change the current API in any other way)

- Fix ``gnt-node migrate``

- ``gnt-debug`` man page

- Fixes various more typos and small issues

- Increase disk resync maximum speed to 60MB/s (from 30MB/s)

Version 1.2.6

-------------

*(Released Wed, 24 Sep 2008)*

- new ``--hvm-nic-type`` and ``--hvm-disk-type`` flags to control the

  type of disk exported to fully virtualized instances.

- provide access to the serial console of HVM instances

- instance auto_balance flag, set by default. If turned off it will

  avoid warnings on cluster verify if there is not enough memory to fail

  over an instance. in the future it will prevent automatically failing

  it over when we will support that.

- batcher tool for instance creation, see ``tools/README.batcher``

- ``gnt-instance reinstall --select-os`` to interactively select a new

  operating system when reinstalling an instance.

- when changing the memory amount on instance modify a check has been

  added that the instance will be able to start. also warnings are

  emitted if the instance will not be able to fail over, if auto_balance

  is true.

- documentation fixes

- sync fields between ``gnt-instance list/modify/add/import``

- fix a race condition in drbd when the sync speed was set after giving

  the device a remote peer.

Version 1.2.5

-------------

*(Released Tue, 22 Jul 2008)*

- note: the allowed size and number of tags per object were reduced

- fix a bug in ``gnt-cluster verify`` with inconsistent volume groups

- fixed twisted 8.x compatibility

- fixed ``gnt-instance replace-disks`` with iallocator

- add TCP keepalives on twisted connections to detect restarted nodes

- disk increase support, see ``gnt-instance grow-disk``

- implement bulk node/instance query for RAPI

- add tags in node/instance listing (optional)

- experimental migration (and live migration) support, read the man page

  for ``gnt-instance migrate``

- the ``ganeti-watcher`` logs are now timestamped, and the watcher also

  has some small improvements in handling its state file

Version 1.2.4

-------------

*(Released Fri, 13 Jun 2008)*

- Experimental readonly, REST-based remote API implementation;

  automatically started on master node, TCP port 5080, if enabled by

  ``--enable-rapi`` parameter to configure script.

- Instance allocator support. Add and import instance accept a

  ``--iallocator`` parameter, and call that instance allocator to decide

  which node to use for the instance. The iallocator document describes

  what's expected from an allocator script.

- ``gnt-cluster verify`` N+1 memory redundancy checks: Unless passed the

  ``--no-nplus1-mem`` option ``gnt-cluster verify`` now checks that if a

  node is lost there is still enough memory to fail over the instances

  that reside on it.

- ``gnt-cluster verify`` hooks: it is now possible to add post-hooks to

  ``gnt-cluster verify``, to check for site-specific compliance. All the

  hooks will run, and their output, if any, will be displayed. Any

  failing hook will make the verification return an error value.

- ``gnt-cluster verify`` now checks that its peers are reachable on the

  primary and secondary interfaces

- ``gnt-node add`` now supports the ``--readd`` option, to readd a node

  that is still declared as part of the cluster and has failed.

- ``gnt-* list`` commands now accept a new ``-o +field`` way of

  specifying output fields, that just adds the chosen fields to the

  default ones.

- ``gnt-backup`` now has a new ``remove`` command to delete an existing

  export from the filesystem.

- New per-instance parameters hvm_acpi, hvm_pae and hvm_cdrom_image_path

  have been added. Using them you can enable/disable acpi and pae

  support, and specify a path for a cd image to be exported to the

  instance. These parameters as the name suggest only work on HVM

  clusters.

- When upgrading an HVM cluster to Ganeti 1.2.4, the values for ACPI and

  PAE support will be set to the previously hardcoded values, but the

  (previously hardcoded) path to the CDROM ISO image will be unset and

  if required, needs to be set manually with ``gnt-instance modify``

  after the upgrade.

- The address to which an instance's VNC console is bound is now

  selectable per-instance, rather than being cluster wide. Of course

  this only applies to instances controlled via VNC, so currently just

  applies to HVM clusters.

Version 1.2.3

-------------

*(Released Mon, 18 Feb 2008)*

- more tweaks to the disk activation code (especially helpful for DRBD)

- change the default ``gnt-instance list`` output format, now there is

  one combined status field (see the manpage for the exact values this

  field will have)

- some more fixes for the mac export to hooks change

- make Ganeti not break with DRBD 8.2.x (which changed the version

  format in ``/proc/drbd``) (issue 24)

- add an upgrade tool from "remote_raid1" disk template to "drbd" disk

  template, allowing migration from DRBD0.7+MD to DRBD8

Version 1.2.2