Synnefo » snf-image

# Copyright 2011 GRNET S.A. All rights reserved.

#

# Redistribution and use in source and binary forms, with or without

# modification, are permitted provided that the following conditions

# are met:

#

#   1. Redistributions of source code must retain the above copyright

#      notice, this list of conditions and the following disclaimer.

#

#  2. Redistributions in binary form must reproduce the above copyright

#     notice, this list of conditions and the following disclaimer in the

#     documentation and/or other materials provided with the distribution.

#

# THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND

# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE

# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE

# ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE

# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL

# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS

# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)

# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT

# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY

# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF

# SUCH DAMAGE.

#

# The views and conclusions contained in the software and documentation are

# those of the authors and should not be interpreted as representing official

# policies, either expressed or implied, of GRNET S.A.

AWK="awk"

KPARTX="kpartx"

LOSETUP="losetup"

SFDISK="sfdisk"

QEMU_IMG="qemu-img"

INSTALL_MBR="install-mbr"

TIMELIMIT="timelimit"

CURL="curl"

PROGRESS_MONITOR="snf-progress-monitor"

progress_monitor_support="@progress_monitor_support@"

CLEANUP=( )

add_cleanup() {

    local cmd=""

    for arg; do cmd+=$(printf "%q " "$arg"); done

    CLEANUP+=("$cmd")

}

log_error() {

    echo "$@" >&2

}

get_api5_arguments() {

    GETOPT_RESULT=$*

    # Note the quotes around `$TEMP': they are essential!

    eval set -- "$GETOPT_RESULT"

    while true; do

        case "$1" in

            -i|-n) instance=$2; shift 2;;

            -o) old_name=$2; shift 2;;

            -b) blockdev=$2; shift 2;;

            -s) swapdev=$2; shift 2;;

            --) shift; break;;

            *)  log_error "Internal error!" >&2; exit 1;;

        esac

    done

    if [ -z "$instance" -o -z "$blockdev" ]; then

        log_error "Missing OS API Argument (-i, -n, or -b)"

        exit 1

    fi

    if [ "$SCRIPT_NAME" != "export" -a -z "$swapdev"  ]; then

        log_error "Missing OS API Argument -s (swapdev)"

        exit 1

    fi

    if [ "$SCRIPT_NAME" = "rename" -a -z "$old_name"  ]; then

        log_error "Missing OS API Argument -o (old_name)"

        exit 1

    fi

}

get_api10_arguments() {

    if [ -z "$INSTANCE_NAME" -o -z "$HYPERVISOR" -o -z "$DISK_COUNT" ]; then

        log_error "Missing OS API Variable:"

        log_error "(INSTANCE_NAME HYPERVISOR or DISK_COUNT)"

        exit 1

    fi

    instance=$INSTANCE_NAME

    if [ $DISK_COUNT -lt 1 -o -z "$DISK_0_PATH" ]; then

        log_error "At least one disk is needed"

        exit 1

    fi

    if [ "$SCRIPT_NAME" = "export" ]; then

        if [ -z "$EXPORT_DEVICE" ]; then

        log_error "Missing OS API Variable EXPORT_DEVICE"

    fi

    blockdev=$EXPORT_DEVICE

    elif [ "$SCRIPT_NAME" = "import" ]; then

        if [ -z "$IMPORT_DEVICE" ]; then

        log_error "Missing OS API Variable IMPORT_DEVICE"

        fi

        blockdev=$IMPORT_DEVICE

    else

        blockdev=$DISK_0_PATH

    fi

    if [ "$SCRIPT_NAME" = "rename" -a -z "$OLD_INSTANCE_NAME" ]; then

        log_error "Missing OS API Variable OLD_INSTANCE_NAME"

    fi

    old_name=$OLD_INSTANCE_NAME

}

get_api20_arguments() {

    get_api10_arguments

    if [ -z "$OSP_IMG_ID" ]; then

        log_error "Missing OS API Parameter: OSP_IMG_ID"

        exit 1

    fi

    if [ -z "$OSP_IMG_FORMAT" ]; then

        log_error "Missing OS API Parameter: OSP_IMG_FORMAT"

        exit 1

    fi

    if [ -z "$OSP_IMG_PASSWD" ]; then

        log_error "Missing OS API Parameter: OSP_IMG_PASSWD"

        exit 1

    fi

    if [ -z "$OSP_IMG_PROPERTIES" ]; then

        log_error "Missing OS API Parameter: OSP_IMG_PROPERTIES"

        exit 1

    fi

    IMG_ID=$OSP_IMG_ID

    IMG_FORMAT=$OSP_IMG_FORMAT

    IMG_PASSWD=$OSP_IMG_PASSWD

    IMG_PROPERTIES=$OSP_IMG_PROPERTIES

    if [ -n "$OSP_IMG_PERSONALITY" ]; then

        IMG_PERSONALITY=$OSP_IMG_PERSONALITY

    fi

}

map_disk0() {

    blockdev="$1"

    filesystem_dev_base=$($KPARTX -l -p- $blockdev | \

                            grep -m 1 -- "-1.*$blockdev" | \

                            $AWK '{print $1}')

    if [ -z "$filesystem_dev_base" ]; then

        log_error "Cannot interpret kpartx output and get partition mapping"

        exit 1

    fi

    $KPARTX -a -p- "$blockdev" > /dev/null

    filesystem_dev="/dev/mapper/${filesystem_dev_base/%-1/}"

    if [ ! -b "/dev/mapper/$filesystem_dev_base" ]; then

        log_error "Can't find kpartx mapped partition:" \

                                            "/dev/mapper/$filesystem_dev_base"

        exit 1

    fi

    echo "$filesystem_dev"

}

unmap_disk0() {

    $KPARTX -d -p- "$1"

}

format_disk0() {

    local device="$1"

    local image_type="$2"

    declare -A part_id=( ['extdump']="83" ["ntfsdump"]="7" )

    # The -f is needed, because we use an optimal alignment and sfdisk complains

    # about partitions not ending on clylinder boundary.

    local sfdisk_cmd="$SFDISK -uS -H 255 -S 63 -f --quiet --Linux --DOS $device"

    $sfdisk_cmd > /dev/null <<EOF

2048,,${part_id["$image_type"]},*

EOF

}

create_floppy() {

    local img=$1

    local target=$(mktemp -d)

    add_cleanup rmdir "$target"

    dd bs=512 count=2880 if=/dev/zero of="$img"

    mkfs.ext2 -F "$img" > /dev/null

    mount "$img" "$target" -o loop

    set | egrep ^snf_export_\\w+= | sed -e 's/^snf_export_/export SNF_IMAGE_/' \

        > "$target/rules"

    umount "$target"

}

# this one is only to be called by create

ganeti_os_main() {

    if [ -z "$OS_API_VERSION" -o "$OS_API_VERSION" = "5" ]; then

        OS_API_VERSION=5

        GETOPT_RESULT=`getopt -o o:n:i:b:s: -n '$0' -- "$@"`

        if [ $? != 0 ] ; then log_error "Terminating..."; exit 1 ; fi

        get_api5_arguments $GETOPT_RESULT

    elif [ "$OS_API_VERSION" = "10" -o "$OS_API_VERSION" = "15" ]; then

        get_api10_arguments

    elif [ "$OS_API_VERSION" = "20" ]; then

        get_api20_arguments

        IMAGE_NAME=$IMG_ID

        IMAGE_TYPE=$IMG_FORMAT

    else

        log_error "Unknown OS API VERSION $OS_API_VERSION"

        exit 1

    fi

    if [ -n "$OS_VARIANT" ]; then

        if [ ! -d "$VARIANTS_DIR" ]; then

            log_error "OS Variants directory $VARIANTS_DIR doesn't exist"

            exit 1

        fi

        VARIANT_CONFIG="$VARIANTS_DIR/$OS_VARIANT.conf"

        if [ -f "$VARIANT_CONFIG" ]; then

            . "$VARIANT_CONFIG"

        else

            if grep -qxF "$OS_VARIANT" variants.list; then

                log_error "ERROR: instance-image configuration error"

                log_error "  Published variant $OS_VARIANT is missing its" \

                    "config file"

                log_error "  Please create $VARIANT_CONFIG or unpublish the" \

                    "variant"

                log_error "  (by removing $OS_VARIANT from variants.list)"

            else

                log_error "Unofficial variant $OS_VARIANT is unsupported"

                log_error "Most probably this is a user error, forcing a" \

                    "wrong name"

                log_error "To support this variant please create file" \

                    "$VARIANT_CONFIG"

            fi

            exit 1

        fi

    fi

}

cleanup() {

# if something fails here, it souldn't call cleanup again...

    trap - EXIT

    if [ ${#CLEANUP[*]} -gt 0 ]; then

        LAST_ELEMENT=$((${#CLEANUP[*]}-1))

        REVERSE_INDEXES=$(seq ${LAST_ELEMENT} -1 0)

        for i in $REVERSE_INDEXES; do

            # If something fails here, it's better to retry it for a few times

            # before we give up with an error. This is needed for kpartx when

            # dealing with ntfs partitions mounted through fuse. umount is not

            # synchronous and may return while the partition is still busy. A

            # premature attempt to delete partition mappings through kpartx on a

            # device that hosts previously mounted ntfs partition may fail with

            # an  `device-mapper: remove ioctl failed: Device or resource busy'

            # error. A sensible workaround for this is to wait for a while and

            # then try again.

            local cmd=${CLEANUP[$i]}

            $cmd || for interval in 0.25 0.5 1 2 4; do

            echo "Command $cmd failed!"

            echo "I'll wait for $interval secs and will retry..."

            sleep $interval

            $cmd && break

        done

        if [ "$?" != "0" ]; then

            echo "Giving Up..."

            exit 1;

        fi

    done

  fi

}

trap cleanup EXIT

DEFAULT_FILE="@sysconfdir@/default/snf-image"

if [ -f "$DEFAULT_FILE" ]; then

    . "$DEFAULT_FILE"

fi

: ${ARCH:="x86_64"}

: ${VARIANTS_DIR:="@sysconfdir@/ganeti/snf-image/variants"}

: ${IMAGE_DIR:="@localstatedir@/lib/snf-image"}

: ${HELPER_DIR:="@HELPER_DIR@"}

: ${HELPER_IMG:="@HELPER_IMG@"}

: ${HELPER_KERNEL:="@HELPER_KERNEL@"}

: ${HELPER_INITRD:="@HELPER_INITRD@"}

: ${HELPER_PKG:="@HELPER_DIR@/snf-image-helper.deb"}

: ${HELPER_SOFT_TIMEOUT:=15}

: ${HELPER_HARD_TIMEOUT:=5}

: ${HELPER_USER:="nobody"}

: ${HELPER_CACHE_FILE:="@HELPER_DIR@/cache.tar"}

: ${HELPER_EXTRA_PKGS:="linux-image-amd64,e2fsprogs,ntfs-3g,ntfsprogs,xmlstarlet,python,parted,reglookup,chntpw"}

: ${HELPER_MIRROR:=""}

SCRIPT_NAME=$(basename $0)

if [ -f /sbin/blkid -a -x /sbin/blkid ]; then

    VOL_ID="/sbin/blkid -c /dev/null -o value -s UUID"

    VOL_TYPE="/sbin/blkid -c /dev/null -o value -s TYPE"

else

    for dir in /lib/udev /sbin; do

        if [ -f $dir/vol_id -a -x $dir/vol_id ]; then

            VOL_ID="$dir/vol_id -u"

            VOL_TYPE="$dir/vol_id -t"

        fi

    done

fi

if [ -z "$VOL_ID" ]; then

    log_error "vol_id or blkid not found, please install udev or util-linux"

    exit 1

fi

# vim: set sta sts=4 shiftwidth=4 sw=4 et ai :