Synnefo

.. _admin-guide:

Synnefo Administrator's Guide

^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

This is the complete Synnefo Administrator's Guide.

.. _syn+archip:

General Synnefo Architecture

============================

The following figure shows a detailed view of the whole Synnefo architecture

and how it interacts with multiple Ganeti clusters. We hope that after reading

the Administrator's Guide you will be able to understand every component and

all the interactions between them.

.. image:: images/synnefo-arch2.png

   :width: 100%

   :target: _images/synnefo-arch2.png

Synnefo also supports RADOS as an alternative storage backend for

Files/Images/VM disks. You will find the :ref:`corresponding figure

<syn+archip+rados>` later in this guide.

Identity Service (Astakos)

==========================

Authentication methods

----------------------

Astakos supports multiple authentication methods:

 * local username/password

 * LDAP / Active Directory

 * SAML 2.0 (Shibboleth) federated logins

 * Google

 * Twitter

 * LinkedIn

.. _shibboleth-auth:

Shibboleth Authentication

~~~~~~~~~~~~~~~~~~~~~~~~~

Astakos can delegate user authentication to a Shibboleth federation.

To setup shibboleth, install package::

  apt-get install libapache2-mod-shib2

Change appropriately the configuration files in ``/etc/shibboleth``.

Add in ``/etc/apache2/sites-available/synnefo-ssl``::

  ShibConfig /etc/shibboleth/shibboleth2.xml

  Alias      /shibboleth-sp /usr/share/shibboleth

  <Location /ui/login/shibboleth>

    AuthType shibboleth

    ShibRequireSession On

    ShibUseHeaders On

    require valid-user

  </Location>

and before the line containing::

  ProxyPass        / http://localhost:8080/ retry=0

add::

  ProxyPass /Shibboleth.sso !

Then, enable the shibboleth module::

  a2enmod shib2

After passing through the apache module, the following tokens should be

available at the destination::

  eppn # eduPersonPrincipalName

  Shib-InetOrgPerson-givenName

  Shib-Person-surname

  Shib-Person-commonName

  Shib-InetOrgPerson-displayName

  Shib-EP-Affiliation

  Shib-Session-ID

Finally, add 'shibboleth' in ``ASTAKOS_IM_MODULES`` list. The variable resides

inside the file ``/etc/synnefo/20-snf-astakos-app-settings.conf``

Twitter Authentication

~~~~~~~~~~~~~~~~~~~~~~

To enable twitter authentication while signed in under a Twitter account,

visit dev.twitter.com/apps.

Click Create an application.

Fill the necessary information and for callback URL give::

    https://node1.example.com/ui/login/twitter/authenticated

Finally, add 'twitter' in ``ASTAKOS_IM_MODULES`` list. The variable resides

inside the file ``/etc/synnefo/20-snf-astakos-app-settings.conf``

Google Authentication

~~~~~~~~~~~~~~~~~~~~~

To enable google authentication while signed in under a Google account,

visit https://code.google.com/apis/console/.

Under API Access select Create another client ID, select Web application,

expand more options in Your site or hostname section and in Authorized

Redirect URIs add:

Fill the necessary information and for callback URL give::

    https://node1.example.com/ui/login/google/authenticated

Finally, add 'google' in ``ASTAKOS_IM_MODULES`` list. The variable resides

inside the file ``/etc/synnefo/20-snf-astakos-app-settings.conf``

Working with Astakos

--------------------

User registration

~~~~~~~~~~~~~~~~~

When a new user signs up, he/she is not directly marked as active. You can see 

his/her state by running (on the machine that runs the Astakos app):

.. code-block:: console

   $ snf-manage user-list

More detailed user status is provided in the `status` field of the `user-show` 

command:

.. code-block:: console

  $ snf-manage user-show <user-id>

  id                  : 6

  uuid                : 78661411-5eed-412f-a9ea-2de24f542c2e

  status              : Accepted/Active (accepted policy: manual)

  email               : user@synnefo.org

  ....

Based on the `astakos-app` configuration, there are several ways for a user to

get verified and activated in order to be able to login. We discuss the user

verification and activation flow in the following section.

User activation flow

````````````````````

A user can register for an account using the astakos signup form. Once the form

is submited successfully a user entry is created in astakos database. That entry

is passed through the astakos activation backend which handles whether the user

should be automatically verified and activated.

Email verification

``````````````````

The verification process takes place in order to ensure that the user owns the

email provided during the signup process. By default, after each successful

signup astakos notifies user with an verification url via email. 

At this stage:

    * subsequent registrations invalidate and delete the previous registrations 

      of the same email address.

    * in case user misses the initial notification, additional emails can be

      send either via the url which is prompted to the user if he tries to

      login, or by the administrator using the ``snf-manage user-activation-send

      <userid>`` command.

    * administrator may also enforce a user to get verified using the

      ``snf-manage user-modify --verify <userid>`` command.

Account activation

``````````````````

Once the user gets verified, it is time for Astakos to decide whether or not to

proceed through user activation process. If ``ASTAKOS_MODERATION_ENABLED``

setting is set to ``False`` (default value) user gets activated automatically. 

In case the moderation is enabled Astakos may still automatically activate the

user in the following cases:

    * User email matches any of the regular expressions defined in

      ``ASTAKOS_RE_USER_EMAIL_PATTERNS`` (defaults to ``[]``)

    * User used a signup method (e.g. ``shibboleth``) for which automatic

      activation is enabled (see 

      :ref:`authentication methods policies <auth_methods_policies>`).

If all of the above fail to trigger automatic activation, an email is sent to

the persons listed in ``HELPDESK``, ``MANAGERS`` and ``ADMINS`` settings,

notifing that there is a new user pending for moderation and that it's up to

the administrator to decide if the user should be activated. The UI also shows

a corresponding 'pending moderation' message to the user. The administrator can

activate a user using the ``snf-manage user-modify`` command:

.. code-block:: console

    # command to activate a pending user

    $ snf-manage user-modify --accept <userid>

    # command to reject a pending user

    $ snf-manage user-modify --reject --reject-reason="spammer" <userid>

Once the activation process finishes, a greeting message is sent to the user

email address and a notification for the activation to the persons listed in

``HELPDESK``, ``MANAGERS`` and ``ADMINS`` settings. Once activated the user is

able to login and access the Synnefo services.

Additional authentication methods

`````````````````````````````````

Astakos supports third party logins from external identity providers. This

can be usefull since it allows users to use their existing credentials to 

login to astakos service.

Currently astakos supports the following identity providers:

    * `Shibboleth <http://www.internet2.edu/shibboleth>`_ (module name

      ``shibboleth``)

    * `Google <https://developers.google.com/accounts/docs/OAuth2>`_ (module

      name ``google``)

    * `Twitter <https://dev.twitter.com/docs/auth>`_ (module name ``twitter``)

    * `LinkedIn <http://developer.linkedin.com/documents/authentication>`_

      (module name ``linkedin``)

To enable any of the above modules (by default only ``local`` accounts are

allowed), retrieve and set the required provider settings and append the 

module name in ``ASTAKOS_IM_MODULES``.

.. code-block:: python

    # settings from https://code.google.com/apis/console/

    ASTAKOS_GOOGLE_CLIENT_ID = '1111111111-epi60tvimgha63qqnjo40cljkojcann3.apps.googleusercontent.com'

    ASTAKOS_GOOGLE_SECRET = 'tNDQqTDKlTf7_LaeUcWTWwZM'

    # let users signup and login using their google account

    ASTAKOS_IM_MODULES = ['local', 'google']

.. _auth_methods_policies:

Authentication method policies

``````````````````````````````

Astakos allows you to override the default policies for each enabled provider 

separately by adding the approriate settings in your ``.conf`` files in the 

following format:

**ASTAKOS_AUTH_PROVIDER_<module>_<policy>_POLICY**

Available policies are:

    * **CREATE** Users can signup using that provider (default: ``True``) 

    * **REMOVE/ADD** Users can remove/add login method from their profile 

      (default: ``True``)

    * **AUTOMODERATE** Automatically activate users that signup using that

      provider (default: ``False``)

    * **LOGIN** Whether or not users can use the provider to login (default:

      ``True``).

e.g. to enable automatic activation for your academic users, while keeping 

locally signed up users under moderation you can apply the following settings.

.. code-block:: python

    ASTAKOS_AUTH_PROVIDER_SHIBBOLETH_AUTOMODERATE_POLICY = True

    ASTAKOS_AUTH_PROVIDER_SHIBBOLETH_REMOVE_POLICY = False

User login

~~~~~~~~~~

During the logging procedure, the user is authenticated by the respective

identity provider.

If ``ASTAKOS_RECAPTCHA_ENABLED`` is set and the user fails several times

(``ASTAKOS_RATELIMIT_RETRIES_ALLOWED`` setting) to provide the correct

credentials for a local account, he/she is then prompted to solve a captcha

challenge.

Upon success, the system renews the token (if it has expired), logins the user

and sets the cookie, before redirecting the user to the ``next`` parameter

value.

Setting quota limits

~~~~~~~~~~~~~~~~~~~~

Set default quota

`````````````````

To inspect current default base quota limits, run::

   # snf-manage resource-list

You can modify the default base quota limit for all future users with::

   # snf-manage resource-modify <resource_name> --default-quota <value>

Set base quota for individual users

```````````````````````````````````

For individual users that need different quota than the default

you can set it for each resource like this::

    # use this to display quota / uuid

    # snf-manage user-show 'uuid or email' --quota

    # snf-manage user-modify <user-uuid> --base-quota 'cyclades.vm' 10

You can set base quota for all existing users, with possible exceptions, using::

    # snf-manage user-modify --all --base-quota cyclades.vm 10 --exclude uuid1,uuid2

All quota for which values different from the default have been set,

can be listed with::

    # snf-manage quota-list --with-custom=True

Enable the Projects feature

~~~~~~~~~~~~~~~~~~~~~~~~~~~

If you want to enable the projects feature so that users may apply

on their own for resources by creating and joining projects,

in ``20-snf-astakos-app-settings.conf`` set::

    # this will make the 'projects' page visible in the dashboard

    ASTAKOS_PROJECTS_VISIBLE = True

You can change the maximum allowed number of pending project applications

per user with::

    # snf-manage resource-modify astakos.pending_app --default-quota <number>

You can also set a user-specific limit with::

    # snf-manage user-modify <user-uuid> --base-quota 'astakos.pending_app' 5

When users apply for projects they are not automatically granted

the resources. They must first be approved by the administrator.

To list pending project applications in astakos::

    # snf-manage project-list --pending

Note the last column, the application id. To approve it::

    # <app id> from the last column of project-list

    # snf-manage project-control --approve <app id>

To deny an application::

    # snf-manage project-control --deny <app id>

Users designated as *project admins* can approve, deny, or modify

an application through the web interface. In

``20-snf-astakos-app-settings.conf`` set::

    # UUIDs of users that can approve or deny project applications from the web.

    ASTAKOS_PROJECT_ADMINS = [<uuid>, ...]

Astakos advanced operations

---------------------------

Adding "Terms of Use"

~~~~~~~~~~~~~~~~~~~~~

Astakos supports versioned terms-of-use. First of all you need to create an

html file that will contain your terms. For example, create the file

``/usr/share/synnefo/sample-terms.html``, which contains the following:

.. code-block:: console

   <h1>My cloud service terms</h1>

   These are the example terms for my cloud service

Then, add those terms-of-use with the snf-manage command:

.. code-block:: console

   $ snf-manage term-add /usr/share/synnefo/sample-terms.html

Your terms have been successfully added and you will see the corresponding link

appearing in the Astakos web pages' footer.

During the account registration, if there are approval terms, the user is

presented with an "I agree with the Terms" checkbox that needs to get checked

in order to proceed.

In case there are new approval terms that the user has not signed yet, the

``signed_terms_required`` view decorator redirects to the ``approval_terms``

view, so the user will be presented with the new terms the next time he/she

logins.

Enabling reCAPTCHA

~~~~~~~~~~~~~~~~~~

Astakos supports the `reCAPTCHA <http://www.google.com/recaptcha>`_ feature.

If enabled, it protects the Astakos forms from bots. To enable the feature, go

to https://www.google.com/recaptcha/admin/create and create your own reCAPTCHA

key pair. Then edit ``/etc/synnefo/20-snf-astakos-app-settings.conf`` and set

the corresponding variables to reflect your newly created key pair. Finally, set

the ``ASTAKOS_RECAPTCHA_ENABLED`` variable to ``True``:

.. code-block:: console

   ASTAKOS_RECAPTCHA_PUBLIC_KEY = 'example_recaptcha_public_key!@#$%^&*('

   ASTAKOS_RECAPTCHA_PRIVATE_KEY = 'example_recaptcha_private_key!@#$%^&*('

   ASTAKOS_RECAPTCHA_ENABLED = True

Restart the service on the Astakos node(s) and you are ready:

.. code-block:: console

   # /etc/init.d/gunicorn restart

Checkout your new Sign up page. If you see the reCAPTCHA box, you have setup

everything correctly.

Astakos internals

-----------------

X-Auth-Token

~~~~~~~~~~~~

Alice requests a specific resource from a cloud service e.g.: Pithos. In the

request she supplies the `X-Auth-Token` to identify whether she is eligible to

perform the specific task. The service contacts Astakos through its

``/account/v1.0/authenticate`` api call (see :ref:`authenticate-api-label`)

providing the specific ``X-Auth-Token``. Astakos checkes whether the token

belongs to an active user and it has not expired and returns a dictionary

containing user related information. Finally the service uses the ``uniq``

field included in the dictionary as the account string to identify the user

accessible resources.

.. _authentication-label:

Django Auth methods and Backends

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Astakos incorporates Django user authentication system and extends its User model.

Since username field of django User model has a limitation of 30 characters,

AstakosUser is **uniquely** identified by the ``email`` instead. Therefore,

``astakos.im.authentication_backends.EmailBackend`` is served to authenticate a

user using email if the first argument is actually an email, otherwise tries

the username.

A new AstakosUser instance is assigned with a uui as username and also with a

``auth_token`` used by the cloud services to authenticate the user.

``astakos.im.authentication_backends.TokenBackend`` is also specified in order

to authenticate the user using the email and the token fields.

Logged on users can perform a number of actions:

 * access and edit their profile via: ``/im/profile``.

 * change their password via: ``/im/password``

 * send feedback for grnet services via: ``/im/send_feedback``

 * logout (and delete cookie) via: ``/im/logout``

Internal Astakos requests are handled using cookie-based Django user sessions.

External systems should forward to the ``/login`` URI. The server,

depending on its configuration will redirect to the appropriate login page.

When done with logging in, the service's login URI should redirect to the URI

provided with next, adding user and token parameters, which contain the email

and token fields respectively.

The login URI accepts the following parameters:

======================  =========================

Request Parameter Name  Value

======================  =========================

next                    The URI to redirect to when the process is finished

renew                   Force token renewal (no value parameter)

force                   Force logout current user (no value parameter)

======================  =========================

External systems inside the ``ASTAKOS_COOKIE_DOMAIN`` scope can acquire the

user information by the cookie identified by ``ASTAKOS_COOKIE_NAME`` setting

(set during the login procedure).

Finally, backend systems having acquired a token can use the

:ref:`authenticate-api-label` API call from a private network or through HTTPS.

Compute/Network/Image Service (Cyclades)

========================================

Working with Cyclades

---------------------

Managing Ganeti Backends

~~~~~~~~~~~~~~~~~~~~~~~~

Since v0.11, Synnefo is able to manage multiple Ganeti clusters (backends)

making it capable to scale linearly to tens of thousands of VMs. Backends

can be dynamically added or removed via `snf-manage` commands.

Each newly created VM is allocated to a Ganeti backend by the Cyclades backend

allocator. The VM is "pinned" to this backend, and can not change through its

lifetime. The backend allocator decides in which backend to spawn the VM based

on the available resources of each backend, trying to balance the load between

them.

Handling of Networks, as far as backends are concerned, is based on whether the

network is public or not. Public networks are created through the `snf-manage

network-create` command, and are only created on one backend. Private networks

are created on all backends, in order to ensure that VMs residing on different

backends can be connected to the same private network.

Listing existing backends

`````````````````````````

To list all the Ganeti backends known to Synnefo, we run:

.. code-block:: console

   $ snf-manage backend-list

Adding a new Ganeti backend

```````````````````````````

Backends are dynamically added under the control of Synnefo with `snf-manage

backend-add` command. In this section it is assumed that a Ganeti cluster,

named ``cluster.example.com`` is already up and running and configured to be

able to host Synnefo VMs.

To add this Ganeti cluster, we run:

.. code-block:: console

   $ snf-manage backend-add --clustername=cluster.example.com --user="synnefo_user" --pass="synnefo_pass"

where ``clustername`` is the Cluster hostname of the Ganeti cluster, and

``user`` and ``pass`` are the credentials for the `Ganeti RAPI user

<http://docs.ganeti.org/ganeti/2.2/html/rapi.html#users-and-passwords>`_.  All

backend attributes can be also changed dynamically using the `snf-manage

backend-modify` command.

``snf-manage backend-add`` will also create all existing private networks to

the new backend. You can verify that the backend is added, by running

`snf-manage backend-list`.

Note that no VMs will be spawned to this backend, since by default it is in a

``drained`` state after addition and also it has no public network assigned to

it.

So, first you need to create its public network, make sure everything works as

expected and finally make it active by un-setting the ``drained`` flag. You can

do this by running:

.. code-block:: console

   $ snf-manage backend-modify --drained=False <backend_id>

Removing an existing Ganeti backend

```````````````````````````````````

In order to remove an existing backend from Synnefo, we run:

.. code-block:: console

   # snf-manage backend-remove <backend_id>

This command will fail if there are active VMs on the backend. Also, the

backend is not cleaned before removal, so all the Synnefo private networks

will be left on the Ganeti nodes. You need to remove them manually.

Allocation of VMs in Ganeti backends

````````````````````````````````````

As already mentioned, the Cyclades backend allocator is responsible for

allocating new VMs to backends. This allocator does not choose the exact Ganeti

node that will host the VM but just the Ganeti backend. The exact node is

chosen by the Ganeti cluster's allocator (hail).

The decision about which backend will host a VM is based on the available

resources. The allocator computes a score for each backend, that shows its load

factor, and the one with the minimum score is chosen. The admin can exclude

backends from the allocation phase by marking them as ``drained`` by running:

.. code-block:: console

   $ snf-manage backend-modify --drained=True <backend_id>

The backend resources are periodically updated, at a period defined by

the ``BACKEND_REFRESH_MIN`` setting, or by running `snf-manage backend-update-status`

command. It is advised to have a cron job running this command at a smaller

interval than ``BACKEND_REFRESH_MIN`` in order to remove the load of refreshing

the backends stats from the VM creation phase.

Finally, the admin can decide to have a user's VMs being allocated to a

specific backend, with the ``BACKEND_PER_USER`` setting. This is a mapping

between users and backends. If the user is found in ``BACKEND_PER_USER``, then

Synnefo allocates all his/hers VMs to the specific backend in the variable,

even if is marked as drained (useful for testing).

Allocation based on disk-templates

**********************************

Besides the available resources of each Ganeti backend, the allocator takes

into consideration the disk template of the instance when trying to allocate it

to a Ganeti backend. Specifically, the allocator checks if the flavor of the

instance belongs to the available disk templates of each Ganeti backend.

A Ganeti cluster has a list of enabled disk templates

(`--enabled-disk-templates`) and a list of allowed disk templates for new

instances (`--ipolicy-disk-templates`). See the `gnt-cluster` manpage for more

details about these options.

When Synnefo allocates an instance, it checks whether the disk template of the

new instance belongs both in the enabled and ipolicy disk templates. You can

see the list of the available disk-templates by running `snf-manage

backend-list`. This list should be updated automatically after changing

these options in Ganeti and it can also be updated by running `snf-manage

backend-update-status`.

So the administrator, can route instances on different backends based on their

flavor disk template, by modifying the enabled or ipolicy disk templates of

each backend.  Also, the administrator can route instances between different

nodes of the same Ganeti backend, by modifying the same options at the

nodegroup level (see `gnt-group` manpage for mor details).

Managing Virtual Machines

~~~~~~~~~~~~~~~~~~~~~~~~~

As mentioned, Cyclades uses Ganeti for management of VMs. The administrator can

handle Cyclades VMs just like any other Ganeti instance, via `gnt-instance`

commands. All Ganeti instances that belong to Synnefo, are separated from

others, by a prefix in their names. This prefix is defined in

``BACKEND_PREFIX_ID`` setting in

``/etc/synnefo/20-snf-cyclades-app-backend.conf``.

Apart from handling instances directly in the Ganeti level, a number of `snf-manage`

commands are available:

* ``snf-manage server-list``: List servers

* ``snf-manage server-show``: Show information about a server in the Cyclades DB

* ``snf-manage server-inspect``: Inspect the state of a server both in DB and Ganeti

* ``snf-manage server-modify``: Modify the state of a server in the Cycldes DB

* ``snf-manage server-create``: Create a new server

* ``snf-manage server-import``: Import an existing Ganeti instance to Cyclades

Managing Virtual Networks

~~~~~~~~~~~~~~~~~~~~~~~~~

Cyclades is able to create and manage Virtual Networks. Networking is

desployment specific and must be customized based on the specific needs of the

system administrator. For better understanding of networking please refer to

the :ref:`Network <networks>` section.

Exactly as Cyclades VMs can be handled like Ganeti instances, Cyclades Networks

can also by handled as Ganeti networks, via `gnt-network commands`. All Ganeti

networks that belong to Synnefo are named with the prefix

`${BACKEND_PREFIX_ID}-net-`.

There are also the following `snf-manage` commands for managing networks:

* ``snf-manage network-list``: List networks

* ``snf-manage network-show``: Show information about a network in the Cyclades DB

* ``snf-manage network-inspect``: Inspect the state of the network in DB and Ganeti backends

* ``snf-manage network-modify``: Modify the state of a network in the Cycldes DB

* ``snf-manage network-create``: Create a new network

* ``snf-manage network-remove``: Remove an existing network

Managing Network Resources

``````````````````````````

Proper operation of the Cyclades Network Service depends on the unique

assignment of specific resources to each type of virtual network. Specifically,

these resources are:

* IP addresses. Cyclades creates a Pool of IPs for each Network, and assigns a

  unique IP address to each VM, thus connecting it to this Network. You can see

  the IP pool of each network by running `snf-manage network-inspect

  <network_ID>`. IP pools are automatically created and managed by Cyclades,

  depending on the subnet of the Network.

* Bridges corresponding to physical VLANs, which are required for networks of

  type `PRIVATE_PHYSICAL_VLAN`.

* One Bridge corresponding to one physical VLAN which is required for networks of

  type `PRIVATE_MAC_PREFIX`.

IPv4 addresses

**************

An allocation pool of IPv4 addresses is automatically created for every network

that has the attribute `dhcp` set to True. The allocation pool contains the

range of IP addresses that are included in the subnet. The gateway and the

broadcast address of the network are excluded from the allocation pool. The

admin can externally reserve IP addresses to exclude them from automatic

allocation with the `--add-reserved-ips` option of `snf-manage network-modify`

command. For example the following command will reserve two IP addresses

from network with ID `42`:

.. code-block:: console

 snf-manage network-modify --add-reserved-ips=10.0.0.21,10.0.0.22 42

.. warning:: Externally reserving IP addresses is also available at the Ganeti.

 However, when using Cyclades with multiple Ganeti backends, the handling of

 IP pools must be performed from Cyclades!

Bridges

*******

As already mentioned Cyclades use a pool of Bridges that must correspond

to Physical VLAN at the Ganeti level. A bridge from the pool is assigned to

each network of flavor `PHYSICAL_VLAN`. Creation of this pool is done

using `snf-manage pool-create` command. For example the following command

will create a pool containing the brdiges from `prv1` to `prv21`.

.. code-block:: console

   # snf-manage pool-create --type=bridge --base=prv --size=20

You can verify the creation of the pool, and check its contents by running:

.. code-block:: console

   # snf-manage pool-list

   # snf-manage pool-show --type=bridge 1

Finally you can use the `pool-modify` management command in order to externally

reserve the values from pool, extend or shrink the pool if possible.

MAC Prefixes

************

Cyclades also use a pool of MAC prefixes to assign to networks of flavor

`MAC_FILTERED`. Handling of this pool is done exactly as with pool of bridges,

except that the type option must be set to mac-prefix:

.. code-block:: console

   # snf-manage pool-create --type=mac-prefix --base=aa:00:0 --size=65536

The above command will create a pool of MAC prefixes from ``aa:00:1`` to

``b9:ff:f``. The MAC prefix pool is responsible for providing only unicast and

locally administered MAC addresses, so many of these prefixes will be

externally reserved, to exclude from allocation.

Pool reconciliation

*******************

The management command `snf-manage reconcile-pools` can be used that all the

above mentioned pools are consistent and that all values that come from the

pool are not used more than once.

Cyclades advanced operations

----------------------------

Reconciliation mechanism

~~~~~~~~~~~~~~~~~~~~~~~~

On certain occasions, such as a Ganeti or RabbitMQ failure, the state of

Cyclades database may differ from the real state of VMs and networks in the

Ganeti backends. The reconciliation process is designed to synchronize

the state of the Cyclades DB with Ganeti. There are two management commands

for reconciling VMs and Networks

Reconciling Virtual Machines

````````````````````````````

Reconciliation of VMs detects the following conditions:

 * Stale DB servers without corresponding Ganeti instances

 * Orphan Ganeti instances, without corresponding DB entries

 * Out-of-sync state for DB entries wrt to Ganeti instances

To detect all inconsistencies you can just run:

.. code-block:: console

  $ snf-manage reconcile-servers

Adding the `--fix-all` option, will do the actual synchronization:

.. code-block:: console

  $ snf-manage reconcile-servers --fix-all

Please see ``snf-manage reconcile-servers --help`` for all the details.

Reconciling Networks

````````````````````

Reconciliation of Networks detects the following conditions:

  * Stale DB networks without corresponding Ganeti networks

  * Orphan Ganeti networks, without corresponding DB entries

  * Private networks that are not created to all Ganeti backends

  * Unsynchronized IP pools

To detect all inconsistencies you can just run:

.. code-block:: console

  $ snf-manage reconcile-networks

Adding the `--fix-all` option, will do the actual synchronization:

.. code-block:: console

  $ snf-manage reconcile-networks --fix-all

Please see ``snf-manage reconcile-networks --help`` for all the details.

Cyclades internals

------------------

Asynchronous communication with Ganeti backends

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Synnefo uses Google Ganeti backends for VM cluster management. In order for

Cyclades to be able to handle thousands of user requests, Cyclades and Ganeti

communicate asynchronously. Briefly, requests are submitted to Ganeti through

Ganeti's RAPI/HTTP interface, and then asynchronous notifications about the

progress of Ganeti jobs are being created and pushed upwards to Cyclades. The

architecture and communication with a Ganeti backend is shown in the graph

below:

.. image:: images/cyclades-ganeti-communication.png

   :width: 50%

   :target: _images/cyclades-ganeti-communication.png

The Cyclades API server is responsible for handling user requests. Read-only

requests are directly served by looking up the Cyclades DB. If the request

needs an action in the Ganeti backend, Cyclades submit jobs to the Ganeti

master using the `Ganeti RAPI interface

<http://docs.ganeti.org/ganeti/2.2/html/rapi.html>`_.

While Ganeti executes the job, `snf-ganeti-eventd`, `snf-ganeti-hook` and

`snf-progress-monitor` are monitoring the progress of the job and send

corresponding messages to the RabbitMQ servers. These components are part

of `snf-cyclades-gtools` and must be installed on all Ganeti nodes. Specially:

* *snf-ganeti-eventd* sends messages about operations affecting the operating

  state of instances and networks. Works by monitoring the Ganeti job queue.

* *snf-ganeti_hook* sends messages about the NICs of instances. It includes a

  number of `Ganeti hooks <http://docs.ganeti.org/ganeti/2.2/html/hooks.html>`_

  for customisation of operations.

* *snf-progress_monitor* sends messages about the progress of the Image deployment

  phase which is done by the Ganeti OS Definition `snf-image`.

Finally, `snf-dispatcher` consumes messages from the RabbitMQ queues, processes

these messages and properly updates the state of the Cyclades DB. Subsequent

requests to the Cyclades API, will retrieve the updated state from the DB.

Synnefo management commands ("snf-manage")

==========================================

Each Synnefo service, Astakos, Pithos and Cyclades are controlled by the

administrator using the "snf-manage" admin tool. This tool is an extension of

the Django command-line management utility. It is run on the host that runs

each service and provides different types of commands depending the services

running on the host. If you are running more than one service on the same host

"snf-manage" adds all the corresponding commands for each service dynamically,

providing a unified admin environment.

To run "snf-manage" you just type:

.. code-block:: console

   # snf-manage <command> [arguments]

on the corresponding host that runs the service. For example, if you have all

services running on different physical hosts you would do:

.. code-block:: console

   root@astakos-host # snf-manage <astakos-command> [argument]

   root@pithos-host # snf-manage <pithos-command> [argument]

   root@cyclades-host # snf-manage <cyclades-command> [argument]

If you have all services running on the same host you would do:

.. code-block:: console

   root@synnefo-host # snf-manage <{astakos,pithos,cyclades}-command> [argument]

Note that you cannot execute a service's command on a host that is not running

this service. For example, the following will return an error if Astakos and

Cyclades are installed on different physical hosts:

.. code-block:: console

   root@astakos-host # snf-manage <cyclades-command> [argument]

   Unknown command: 'cyclades-command'

   Type 'snf-manage help' for usage.

This is the complete list of "snf-manage" commands for each service.

Astakos snf-manage commands

---------------------------

============================  ===========================

Name                          Description

============================  ===========================

fix-superusers                Transform superusers created by syncdb into AstakosUser instances

cleanup-full                  Cleanup sessions and session catalog

commission-list               List pending commissions

commission-show               Show details for a pending commission

component-add                 Register a component

component-list                List components

component-modify              Modify component attributes

component-show                Show component details

project-control               Manage projects and applications

project-list                  List projects

project-show                  Show project details

quota-list                    List user quota

quota-verify                  Check the integrity of user quota

reconcile-resources-astakos   Reconcile resource usage of Quotaholder with Astakos DB

resource-list                 List resources

resource-modify               Modify a resource's default base quota and boolean flags

service-export-astakos        Export Astakos services and resources in JSON format

service-import                Register services

service-list                  List services

service-show                  Show service details

term-add                      Add approval terms

user-activation-send          Send user activation

user-add                      Add user

authpolicy-add                Create a new authentication provider policy profile

authpolicy-list               List existing authentication provider policy profiles

authpolicy-remove             Remove an authentication provider policy

authpolicy-set                Assign an existing authentication provider policy profile to a user or group

authpolicy-show               Show authentication provider profile details

group-add                     Create a group with the given name

group-list                    List available groups

user-list                     List users

user-modify                   Modify user

user-show                     Show user details

============================  ===========================

Pithos snf-manage commands

--------------------------

============================  ===========================

Name                          Description

============================  ===========================

reconcile-commissions-pithos  Display unresolved commissions and trigger their recovery

service-export-pithos         Export Pithos services and resources in JSON format

reconcile-resources-pithos    Detect unsynchronized usage between Astakos and Pithos DB resources and synchronize them if specified so.

============================  ===========================

Cyclades snf-manage commands

----------------------------

============================== ===========================

Name                           Description

============================== ===========================

backend-add                    Add a new Ganeti backend

backend-list                   List backends

backend-modify                 Modify a backend

backend-update-status          Update backend statistics for instance allocation

backend-remove                 Remove a Ganeti backend

server-create                  Create a new server

server-show                    Show server details

server-list                    List servers

server-modify                  Modify a server

server-import                  Import an existing Ganeti VM into synnefo

server-inspect                 Inspect a server in DB and Ganeti

network-create                 Create a new network

network-list                   List networks

network-modify                 Modify a network

network-inspect                Inspect network state in DB and Ganeti

network-remove                 Delete a network

flavor-create                  Create a new flavor

flavor-list                    List flavors

flavor-modify                  Modify a flavor

image-list                     List images

image-show                     Show image details

pool-create                    Create a bridge or mac-prefix pool

pool-show                      Show pool details

pool-list                      List pools

pool-modify                    Modify a pool

pool-remove                    Delete a pool

port-create                    Create a port connecting a server to a network

port-inspect                   Inspect the state of a port in DB and Ganeti

port-list                      List ports

port-remove                    Delete a port

floating-ip-create             Create a new floating IP

floating-ip-attach             Attach a floating IP to a server

floating-ip-dettach            Dettach a flotaing IP from a server

floating-ip-list               List floating IPs

floating-ip-remove             Delete a floating IP

queue-inspect                  Inspect the messages of a RabbitMQ queue

queue-retry                    Resend messages from Dead Letter queues to original exchanges

service-export-cyclades        Export Cyclades services and resources in JSON format

subnet-create                  Create a subnet

subnet-inspect                 Inspect a subnet in DB

subnet-list                    List subnets

subnet-modify                  Modify a subnet

reconcile-servers              Reconcile servers of Synnefo DB with state of Ganeti backend

reconcile-networks             Reconcile networks of Synnefo DB with state of Ganeti backend

reconcile-pools                Check consistency of pool resources

reconcile-commissions-cyclades Detect and resolve pending commissions to Quotaholder

reconcile-resources-cyclades   Reconcile resource usage of Astakos with Cyclades DB.

============================== ===========================

Astakos helper scripts

======================

Astakos includes two scripts to facilitate the installation procedure.

Running:

.. code-block:: console

   snf-component-register [<component_name>]

automates the registration of the standard Synnefo components (astakos,

cyclades, and pithos) in astakos database. It internally uses the script:

.. code-block:: console

   snf-service-export <component_name> <base_url>

which simulates the export of service and resource definitions of the

standard Synnefo components.

Pithos managing accounts

========================

Pithos provides a utility tool for managing accounts.

To run you just type:

.. code-block:: console

   # pithos-manage-accounts <command> [arguments]

This is the list of the available commands:

============================  ===========================

Name                          Description

============================  ===========================

delete                        Remove an account from the Pithos DB

export-quota                  Export account quota in a file

list                          List existing/dublicate accounts

merge                         Move an account contents in another account

set-container-quota           Set container quota for all or a specific account

============================  ===========================

The "kamaki" API client

=======================

To upload, register or modify an image you will need the **kamaki** tool.

Before proceeding make sure that it is configured properly. Verify that

*image.url*, *file.url*, *user.url* and *token* are set as needed:

.. code-block:: console

   $ kamaki config list

To change a setting use ``kamaki config set``:

.. code-block:: console

   $ kamaki config set image.url https://cyclades.example.com/image

   $ kamaki config set file.url https://pithos.example.com/v1

   $ kamaki config set user.url https://accounts.example.com

   $ kamaki config set token ...

To test that everything works, try authenticating the current account with

kamaki:

.. code-block:: console

  $ kamaki user authenticate

This will output user information.

Upload Image

------------

By convention, images are stored in a container called ``images``. Check if the

container exists, by listing all containers in your account:

.. code-block:: console

   $ kamaki file list

If the container ``images`` does not exist, create it:

.. code-block:: console

  $ kamaki file create images

You are now ready to upload an image to container ``images``. You can upload it

with a Pithos client, or use kamaki directly:

.. code-block:: console

   $ kamaki file upload ubuntu.iso images

You can use any Pithos client to verify that the image was uploaded correctly,

or you can list the contents of the container with kamaki:

.. code-block:: console

  $ kamaki file list images

The full Pithos URL for the previous example will be

``pithos://u53r-un1qu3-1d/images/ubuntu.iso`` where ``u53r-un1qu3-1d`` is the

unique user id (uuid).

Register Image

--------------

To register an image you will need to use the full Pithos URL. To register as

a public image the one from the previous example use:

.. code-block:: console

   $ kamaki image register Ubuntu pithos://u53r-un1qu3-1d/images/ubuntu.iso --public

The ``--public`` flag is important, if missing the registered image will not

be listed by ``kamaki image list``.

Use ``kamaki image register`` with no arguments to see a list of available

options. A more complete example would be the following:

.. code-block:: console

   $ kamaki image register Ubuntu pithos://u53r-un1qu3-1d/images/ubuntu.iso \

            --public --disk-format diskdump --property kernel=3.1.2

To verify that the image was registered successfully use:

.. code-block:: console

   $ kamaki image list --name-like=ubuntu

Miscellaneous

=============

.. _branding:

Branding

--------

Since Synnefo v0.14, you are able to adapt the Astakos, Pithos and Cyclades Web

UI to your company’s visual identity. This is possible using the snf-branding

component, which is automatically installed on the nodes running the API

servers for Astakos, Pithos and Cyclades. 

Configuration

~~~~~~~~~~~~~

This can be done by modifing the settings provided by the snf-branding component

to match your service identity. The settings for the snf-branding application

can be found inside the configuration file ``/etc/synnefo/15-snf-branding.conf``

on the nodes that have Astakos, Pithos and Cyclades installed.

By default, the global service name is "Synnefo" and the company name is

"GRNET". These names and their respective logos and URLs are used throughout

the Astakos, Pithos and Cyclades UI.

**Names and URLs:**

The first group of branding customization refers to the service's and company's

information.

You can overwrite the company and the service name and URL respectively by

uncommenting and setting the following:

.. code-block:: python

  # setting used in Astakos Dashboard/Projects pages

  BRANDING_SERVICE_NAME = 'My cloud'

  BRANDING_SERVICE_URL = 'http://www.mycloud.synnefo.org/'

  # settings used in Astakos, Pithos, Cyclades footer only if 

  # BRANDING_SHOW_COPYRIGHT is set to True

  BRANDING_SHOW_COPYRIGHT = True

  BRANDING_COMPANY_NAME = 'Company LTD'

  BRANDING_COMPANY_URL = 'https://www.company-ltd.synnefo.org/'

**Copyright and footer options:**

By default, no Copyright message is shown in the UI footer. If you want to make

it visible in the footer of Astakos, Pithos and Cyclades UI, you can uncomment

and set to ``True`` the ``BRANDING_SHOW_COPYRIGHT`` setting:

.. code-block:: python

  #BRANDING_SHOW_COPYRIGHT = False

Copyright message defaults to 'Copyright (c) 2011-<current_year>

<BRANDING_COMPANY_NAME>.' but you can overwrite it to a completely custom one by

setting the following option:

.. code-block:: python

  BRANDING_COPYRIGHT_MESSAGE = 'Copyright (c) 2011-2013 GRNET'

If you want to include a custom message in the footer, you can uncomment and 

set the ``BRANDING_FOOTER_EXTRA_MESSAGE`` setting. You can use html markup. 

Your custom message will appear  above Copyright message at the Compute 

templates and the Dashboard UI.

.. code-block:: python

  #BRANDING_FOOTER_EXTRA_MESSAGE = ''

**Images:**

The Astakos, Pithos and Cyclades Web UI has some logos and images.

The branding-related images are presented in  the following table:

===============  ============================  =========

Image            Name/extension  convention    Usage

===============  ============================  =========

Favicon          favicon.ico                   Favicon for all services

Dashboard logo   dashboard_logo.png            Visible in all Astakos UI pages

Compute logo     compute_logo.png              Visible in all Cyclades UI pages

Console logo     console_logo.png              Visible in the Cyclades Console Window

Storage logo     storage_logo.png              Visible in all Pithos UI pages

===============  ============================  =========

There are two methods  available for replacing all, or individual, 

branding-related images:

1. Create a new directory inside ``/usr/share/synnefo/static/`` (e.g.

   ``mybranding``) and place there some or all of your images.

   If you want to replace all of your images, keep the name/extension

   conventions as indicated in the above table and change the

   ``BRANDING_IMAGE_MEDIA_URL`` setting accordingly:

   .. code-block:: python

      # using relative path

      BRANDING_IMAGE_MEDIA_URL= '/static/mybranding/images/' 

      # or if you already host them in a separate domain (e.g. cdn)

      BRANDING_IMAGE_MEDIA_URL= 'https://cdn.synnefo.org/branding/images/'

   If you wish to replace individual images, **do not uncomment**

   ``BRANDING_IMAGE_MEDIA_URL``, but instead provide a relative path, pointing to

   the file inside your directory for each ``BRANDING_<image>_URL`` that you wish

   to replace.

2. Upload some or all of your images to a server and replace each 

   ``BRANDING_<image>_URL`` with the absolute url of the image (i.e.

   ``BRANDING_DASHBOARD_URL = 'https://www.synnefo.com/images/my_dashboard.jpg'``).

   Note that the alternative text  for each image tag inside html documents is 

   alt=“BRANDING_SERVICE_NAME {Dashboard, Compute. Console, Storage}” respectively.

.. note:: Retina optimized images:

   Synnefo UI is optimized for Retina displays. As far as images are concerned,  

   `retina.js <http://retinajs.com/>`_ is used.

   Retina.js checks each image on a page to see if there is a high-resolution 

   version of that image on your server. If a high-resolution variant exists, 

   the script will swap in that image in-place.

   The script assumes you use  `Apple's prescribed high-resolution modifier (@2x)

   <http://developer.apple.com/library/ios/#documentation/2DDrawing/Conceptual/

   DrawingPrintingiOS/SupportingHiResScreensInViews/SupportingHiResScreensInViews

   .html#//apple_ref/doc/uid/TP40010156-CH15-SW1>`_ to denote high-resolution 

   image variants on your server.

   For each of the images that you wish the script to  replace, you must have a 

   high-resolution variant in the same folder  named correctly and it will be 

   detected automatically. For example if your image is in <my_directory> and is 

   named "my_image.jpg" the script will look in the same directory for an image 

   named "my_image@2x.jpg".

   In case that you don’t want to use a high-resolution image, the 

   normal-resolution image will be visible.

More branding

~~~~~~~~~~~~~

Although, it is not 100% branding-related, further verbal customization is

feasible. 

**EMAILS**

The output of all email `*`.txt files will be already customized to contain your

company and service names but you can further alter their content if you feel it

best fits your needs as simple as creasynnefo template.    

In order to overwrite one or more email-templates you need to place your 

modified <email-file>.txt files respecting the following structure:

  **/etc/synnefo/templates/**

      **im/**

          | activation_email.txt

          | email.txt

          | invitation.txt

          | switch_accounts_email.txt

          | welcome_email.txt

          **projects/**

              | project_approval_notification.txt

              | project_denial_notification.txt    

              | project_membership_change_notification.txt

              | project_membership_enroll_notification.txt

              | project_membership_leave_request_notification.txt

              | project_membership_request_notification.txt

              | project_suspension_notification.txt

              | project_termination_notification.txt

      **registration/**

          | email_change_email.txt

          | password_email.txt

Feel free to omit any of the above files you do not wish to overwrite.

Below is a list of all emails sent by Synnefo to users along with a short 

description and a link to their content:

* ``snf-astakos-app/astakos/im/templates/im/email.txt``

  Base email template. Contains a contact email and a “thank you” message.

  (`Link <https://code.grnet.gr/projects/synnefo/repository/revisions/master/changes/snf-astakos-app/astakos/im/templates/im/email.txt>`_)

* ``snf-astakos-app/astakos/im/templates/im/activation_email.txt`` Email sent to

  user that prompts  him/her to click on a link provided to activate the account.

  Extends “email.txt” (`Link <https://code.grnet.gr/projects/synnefo/repository/revisions/master/changes/snf-astakos-app/astakos/im/templates/im/activation_email.txt>`_)

* ``snf-astakos-app/astakos/im/templates/im/invitation.txt`` Email sent to an

  invited user. He/she has to click on a link provided to activate the account.

  Extends “email.txt” (`Link <https://code.grnet.gr/projects/synnefo/repository/revisions/master/changes/snf-astakos-app/astakos/im/templates/im/invitation.txt>`_)

* ``snf-astakos-app/astakos/im/templates/im/switch_accounts_email.txt`` Email

  sent to user upon his/her request to associate this email address with a

  shibboleth account. He/she has to click on a link provided to activate the

  association. Extends “email.txt” (`Link <https://code.grnet.gr/projects/synnefo/repository/revisions/master/changes/snf-astakos-app/astakos/im/templates/im/switch_accounts_email.txt>`_)

* ``snf-astakos-app/astakos/im/templates/im/welcome_email.txt`` Email sent to

  inform the user that his/ her account has been activated. Extends “email.txt”

  (`Link <https://code.grnet.gr/projects/synnefo/repository/revisions/master/changes/snf-astakos-app/astakos/im/templates/im/welcome_email.txt>`_)

* ``snf-astakos-app/astakos/im/templates/registration/email_change_email.txt``

  Email sent to user when he/she has requested new email address assignment. The

  user has to click on a link provided to validate this action. Extends

  “email.txt” (`Link <https://code.grnet.gr/projects/synnefo/repository/revisions/master/changes/snf-astakos-app/astakos/im/templates/registration/email_change_email.txt>`_)

* ``snf-astakos-app/astakos/im/templates/registration/password_email.txt`` Email

  sent for resetting password purpose. The user has to click on a link provided

  to validate this action. Extends “email.txt” (`Link <https://code.grnet.gr/projects/synnefo/repository/revisions/master/changes/snf-astakos-app/astakos/im/templates/registration/password_email.txt>`_)

* ``snf-astakos-app/astakos/im/templates/im/projects/project_approval_notification.txt``

  Informs  the project owner that his/her project has been approved. Extends

  “email.txt” (`Link <https://code.grnet.gr/projects/synnefo/repository/revisions/master/changes/snf-astakos-app/astakos/im/templates/im/projects/project_approval_notification.txt>`_)

* ``snf-astakos-app/astakos/im/templates/im/projects/project_denial_notification.txt``

  Informs the project owner that his/her  project application has been denied

  explaining the reasons. Extends “email.txt” (`Link <https://code.grnet.gr/projects/synnefo/repository/revisions/master/changes/snf-astakos-app/astakos/im/templates/im/projects/project_denial_notification.txt>`_)

* ``snf-astakos-app/astakos/im/templates/im/projects/project_membership_change_notification.txt``

  An email is sent to a user containing information about his project membership

  (whether he has been accepted, rejected or removed). Extends “email.txt” (`Link

  <https://code.grnet.gr/projects/synnefo/repository/revisions/master/changes/snf-astakos-app/astakos/im/templates/im/projects/project_membership_change_notification.txt>`_)

* ``snf-astakos-app/astakos/im/templates/im/projects/project_membership_enroll_notification.txt``

  Informs a user that he/she  has been enrolled to a project. Extends

  “email.txt” (`Link <https://code.grnet.gr/projects/synnefo/repository/revisions/master/changes/snf-astakos-app/astakos/im/templates/im/projects/project_membership_enroll_notification.txt>`_)

* ``snf-astakos-app/astakos/im/templates/im/projects/project_membership_leave_request_notification.txt``

  An email is sent to the project owner to make him aware of a  user having

  requested to leave his project. Extends “email.txt” (`Link <https://code.grnet.gr/projects/synnefo/repository/revisions/master/changes/snf-astakos-app/astakos/im/templates/im/projects/project_membership_leave_request_notification.txt>`_)

* ``snf-astakos-app/astakos/im/templates/im/projects/project_membership_request_notification.txt``

  An email is sent to the project owner to make him/her aware of a user having

  requested to join  his project. Extends “email.txt” (`Link <https://code.grnet.gr/projects/synnefo/repository/revisions/master/changes/snf-astakos-app/astakos/im/templates/im/projects/project_membership_request_notification.txt>`_)

* ``snf-astakos-app/astakos/im/templates/im/projects/project_suspension_notification.txt``

  An email is sent to the project owner to make him/her aware of his/her project

  having been suspended. Extends “email.txt” (`Link <https://code.grnet.gr/projects/synnefo/repository/revisions/master/changes/snf-astakos-app/astakos/im/templates/im/projects/project_suspension_notification.txt>`_)

* ``snf-astakos-app/astakos/im/templates/im/projects/project_termination_notification.txt``

  An email is sent to the project owner to make him/her aware of his/her project

  having been terminated. Extends “email.txt” (`Link <https://code.grnet.gr/projects/synnefo/repository/revisions/master/changes/snf-astakos-app/astakos/im/templates/im/projects/project_termination_notification.txt>`_)

.. warning:: Django templates language:

  If you choose to  overwrite these email templates, be mindful of the necessary 

  information contained in django template variables that must not be omitted, 

  such as the activation link for activating one’s account and many more. 

  These variables are contained into {{}} inside the templates.

.. RabbitMQ

RabbitMQ Broker

---------------

Queue nodes run the RabbitMQ sofware, which provides AMQP functionality. To

guarantee high-availability, more than one Queue nodes should be deployed, each

of them belonging to the same `RabbitMQ cluster

<http://www.rabbitmq.com/clustering.html>`_. Synnefo uses the RabbitMQ

active/active `High Available Queues <http://www.rabbitmq.com/ha.html>`_ which

are mirrored between two nodes within a RabbitMQ cluster.

The RabbitMQ nodes that form the cluster, are declared to Synnefo through the

`AMQP_HOSTS` setting. Each time a Synnefo component needs to connect to

RabbitMQ, one of these nodes is chosen in a random way. The client that Synnefo

uses to connect to RabbitMQ, handles connection failures transparently and

tries to reconnect to a different node. As long as one of these nodes are up

and running, functionality of Synnefo should not be downgraded by the RabbitMQ

node failures.

All the queues that are being used are declared as durable, meaning that

messages are persistently stored to RabbitMQ, until they get successfully

processed by a client.

Currently, RabbitMQ is used by the following components:

* `snf-ganeti-eventd`, `snf-ganeti-hook` and `snf-progress-monitor`:

  These components send messages concerning the status and progress of

  jobs in the Ganeti backend.

* `snf-dispatcher`: This daemon, consumes the messages that are sent from

  the above components, and updates the Cyclades DB accordingly.

Installation

~~~~~~~~~~~~

Please check the RabbitMQ documentation which covers extensively the

`installation of RabbitMQ server <http://www.rabbitmq.com/download.html>`_ and

the setup of a `RabbitMQ cluster <http://www.rabbitmq.com/clustering.html>`_.

Also, check out the `web management plugin

<http://www.rabbitmq.com/management.html>`_ that can be useful for managing and

monitoring RabbitMQ.

For a basic installation of RabbitMQ on two nodes (node1 and node2) you can do

the following:

On both nodes, install rabbitmq-server and create a Synnefo user:

.. code-block:: console

  $ apt-get install rabbitmq-server

  $ rabbitmqctl add_user synnefo "example_pass"

  $ rabbitmqctl set_permissions synnefo  ".*" ".*" ".*"

Also guarantee that both nodes share the same cookie, by running:

.. code-block:: console

  $ scp node1:/var/lib/rabbitmq/.erlang.cookie node2:/var/lib/rabbitmq/.erlang.cookie

and restart the nodes:

.. code-block:: console

  $ /etc/init.d/rabbitmq-server restart

To setup the RabbitMQ cluster run:

.. code-block:: console

  root@node2: rabbitmqctl stop_app

  root@node2: rabbitmqctl reset

  root@node2: rabbitmqctl cluster rabbit@node1 rabbit@node2

  root@node2: rabbitmqctl start_app

You can verify that the cluster is set up correctly by running:

.. code-block:: console

  root@node2: rabbitmqctl cluster_status

Logging

-------

Logging in Synnefo is using Python's logging module. The module is configured

using dictionary configuration, whose format is described here:

http://docs.python.org/release/2.7.1/library/logging.html#logging-config-dictschema

Note that this is a feature of Python 2.7 that we have backported for use in

Python 2.6.

The logging configuration dictionary is defined in

``/etc/synnefo/10-snf-webproject-logging.conf``

The administrator can have finer logging control by modifying the

``LOGGING_SETUP`` dictionary, and defining subloggers with different handlers

and log levels.  e.g. To enable debug messages only for the API set the level

of 'synnefo.api' to ``DEBUG``

By default, the Django webapp and snf-manage logs to syslog, while

`snf-dispatcher` logs to `/var/log/synnefo/dispatcher.log`.

.. _scale-up:

Scaling up to multiple nodes

============================

Here we will describe how should a large scale Synnefo deployment look like. Make

sure you are familiar with Synnefo and Ganeti before proceeding with this section.

This means you should at least have already set up successfully a working Synnefo

deployment as described in the :ref:`Admin's Installation Guide

<quick-install-admin-guide>` and also read the Administrator's Guide until this

section.

Graph of a scale-out Synnefo deployment

---------------------------------------

Each box in the following graph corresponds to a distinct physical node:

.. image:: images/synnefo-arch2-roles.png

   :width: 100%

   :target: _images/synnefo-arch2-roles.png

The above graph is actually the same with the one at the beginning of this

:ref:`guide <admin-guide>`, with the only difference that here we show the

Synnefo roles of each physical node. These roles are described in the

following section.

.. _physical-node-roles:

Physical Node roles

-------------------