Synnefo

Upgrade to Synnefo v0.15

^^^^^^^^^^^^^^^^^^^^^^^^

Prerequisites

==============

Before upgrading to v0.15 there are two steps that must be performed, relative

with Cyclades networking service.

Add unique name to the NICs of all Ganeti instances

---------------------------------------------------

Since Ganeti 2.8, it is supported to give a name to NICs of Ganeti instances

and refer to them with their name, and not only by their index. Synnefo v0.15

assigns a unique name to each NIC and refers to them by their unique name.

Before upgrading to v0.15, Synnefo must assign names to all existing NICs.

This can easily be performed with a helper script that is shipped with Synnefo

v0.14.10:

.. code-block:: console

 cyclades.host$ /usr/lib/synnefo/tools/add_unique_name_to_nics

.. note:: If you are not upgrading from v0.14.10, you can find the migration

 script here XXX.

Extend public networks to all Ganeti backends

---------------------------------------------

Before v0.15, each public network of Cyclades existed in one of the Ganeti

backends. In order to support dynamic addition and removal of public IPv4

address across VMs, each public network must exist in all Ganeti backends.

If you are using more than one Ganeti backends, before upgrading to v0.15 you

must ensure that the network configuration to all Ganeti backends is identical

and appropriate to support all public networks of Cyclades.

Upgrade Steps

=============

The upgrade to v0.15 consists in the following steps:

1. Bring down services and backup databases.

2. Upgrade packages, migrate the databases and configure settings.

3. Create floating IP pools

4. Register services and resources.

5. Bring up all services.

.. warning::

    It is strongly suggested that you keep separate database backups

    for each service after the completion of each step.

1. Bring web services down, backup databases

============================================

1. All web services must be brought down so that the database maintains a

   predictable and consistent state during the migration process::

    $ service gunicorn stop

    $ service snf-dispatcher stop

    $ service snf-ganeti-eventd stop

2. Backup databases for recovery to a pre-migration state.

3. Keep the database servers running during the migration process.

2. Upgrade Synnefo and configure settings

=========================================

2.1 Install the new versions of packages

----------------------------------------

::

    astakos.host$ apt-get install \

                            python-objpool \

                            snf-common \

                            python-astakosclient \

                            snf-django-lib \

                            snf-webproject \

                            snf-branding \

                            snf-astakos-app

    cyclades.host$ apt-get install \

                            python-objpool \

                            snf-common \

                            python-astakosclient \

                            snf-django-lib \

                            snf-webproject \

                            snf-branding \

                            snf-pithos-backend \

                            snf-cyclades-app

    pithos.host$ apt-get install \

                            python-objpool \

                            snf-common \

                            python-astakosclient \

                            snf-django-lib \

                            snf-webproject \

                            snf-branding \

                            snf-pithos-backend \

                            snf-pithos-app \

                            snf-pithos-webclient

    ganeti.node$ apt-get install \

                            python-objpool \

                            snf-common \

                            snf-cyclades-gtools \

                            snf-pithos-backend

.. note::

   Make sure `snf-webproject' has the same version with snf-common

.. note::

    Installing the packages will cause services to start. Make sure you bring

    them down again (at least ``gunicorn``, ``snf-dispatcher``)

2.2 Sync and migrate the database

---------------------------------

.. note::

   If you are asked about stale content types during the migration process,

   answer 'no' and let the migration finish.

::

    astakos-host$ snf-manage syncdb

    astakos-host$ snf-manage migrate

    cyclades-host$ snf-manage syncdb

    cyclades-host$ snf-manage migrate

    pithos-host$ pithos-migrate upgrade head

.. _pithos_view_registration:

2.3 Register pithos view as an oauth 2.0 client in astakos

----------------------------------------------------------

Starting from synnefo version 0.15, the pithos view, in order to get access to

the data of a protect pithos resource, has to be granted authorization for the

specific resource by astakos.

During the authorization grant procedure, it has to authenticate itself with

astakos since the later has to prevent serving requests by unknown/unauthorized

clients.

To register the pithos view as an OAuth 2.0 client in astakos, use the

following command::

    snf-manage oauth2-client-add pithos-view --secret=<secret> --is-trusted --url https://pithos.synnefo.live/pithos/ui/view

2.4 Update configuration files

------------------------------

The ``ASTAKOS_BASE_URL`` setting has been replaced (both in Cyclades and

Pithos services) with the ``ASTAKOS_AUTH_URL`` setting.

For Cyclades service we have to change the ``20-snf-cyclades-app-api.conf``

file, remove the ``ASTAKOS_BASE_URL`` setting and replace it with

``ASTAKOS_AUTH_URL``. Typically it is sufficient to add ``/identity/v2.0``

at the end of base url to get the auth url. For example if base url had the

value of 'https://accounts.example.synnefo.org/' then the ``ASTAKOS_AUTH_URL``

setting will have the value of

'https://accounts.example.synnefo.org/identity/v2.0'.

For Pithos service we have to change the ``20-snf-pithos-app-settings.conf``

file in the same way as above. In addition to this, we have to change the

``PITHOS_OAUTH2_CLIENT_CREDENTIALS`` setting in the same configuration file

to set the credentials issued for the pithos view in `the previous step`__.

__ pithos_view_registration_

2.5 Upgrade vncauthproxy and configure snf-cyclades-app

-------------------------------------------------------

Synnefo v0.15 adds support for snf-vncauthproxy >= 1.5 and drops support for

older versions. You will have to upgrade snf-vncauthproxy to v1.5 and

configure the authentication (users) file (``/var/lib/vncauthproxy/users``).

In case you're upgrading from an older snf-vncauthproxy version or if it's the

first time you're installing snf-vncauthproxy, you will need to add a

vncauthproxy user (see below for more information on user management) and

restart vncauthproxy daemon.

To manage the authentication file, you can use the vncauthproxy-passwd tool,

to easily add, update and delete users.

To add a user:

.. code-block:: console

    # vncauthproxy-passwd /var/lib/vncauthproxy/users synnefo

You will be prompted for a password.

You should also configure the new ``CYCLADES_VNCAUTHPROXY_OPTS`` setting in

``snf-cyclades-app``, to provide the user and password configured for

``Synnefo`` in the vncauthproxy authentication file and enable SSL support if

snf-vncauthproxy is configured to run with SSL enabled for the control socket.

.. warning:: The vncauthproxy daemon requires a restart for the changes in the

 authentication file to take effect.

.. warning:: If you fail to provide snf-vncauthproxy with a valid

 authentication file, or in case the configuration of vncauthproxy and the

 vncauthproxy snf-cyclades-app settings don't match (ie not having SSL enabled

 on both), VNC console access will not be functional.

Finally, snf-vncauthproxy-1.5 adds a dedicated user and group to be used by the

vncauthproxy daemon. The Debian default file has changed accordingly (``CHUID``

option in ``/etc/default/vncauthproxy``). The Debian default file now also

includes a ``DAEMON_OPTS`` variable which is used to pass any necessary / extra

options to the vncauthproxy daemon. In case you're ugprading from an older

version of vncauthproxy, you should make sure to 'merge' the new default file

with the older one.

Check the `documentation

<http://www.synnefo.org/docs/snf-vncauthproxy/latest/index.html>`_ of

snf-vncauthproxy for more information on upgrading to version 1.5.

2.6 Stats configuration

-----------------------

snf-cyclades-gtools comes with a collectd plugin to collect CPU and network

stats for Ganeti VMs and an example collectd configuration. snf-stats-app is a

Django (snf-webproject) app that serves the VM stats graphsmm by reading the VM

stats (from RRD files) and serves graphs.

To enable / deploy VM stats collecting and snf-stats-app see the relevant

documentation in the :ref:`admin guide <admin-guide-stats>`.

If you were using collectd to collect VM stats on Debian squeeze and you are

upgrading to Wheezy, you will need to upgrade your RRD files. Follow the

instructions on the collectd v4-to-v5 migration `guide

<https://collectd.org/wiki/index.php/V4_to_v5_migration_guide>`_.

You will proabably just need to run the `migration script

<https://collectd.org/wiki/index.php/V4_to_v5_migration_guide#Migration_script>`_

provided.

If you were using a previous version of snf-stats-app, you should also make

sure to set the ``STATS_BASE_URL`` setting in ``20-snf-stats-app-settings.conf``

to match your deployment and change the graph URL settings in

``20-snf-cyclades-app-api.conf`` accordingly.

v0.15 has also introduced the ``CYCLADES_STATS_SECRET_KEY`` and

``STATS_SECRET_KEY`` settings. ``CYCLADES_STATS_SECRET_KEY`` in

``20-snf-cyclades-app-api.conf`` is used by Cyclades to encrypt the instance id

/ hostname  in the URLs serving the VM stats. You should set it to a random

value / string and make sure that it's the same as the ``STATS_SECRET_KEY``

setting (used to decrypt the instance hostname) in

``20-snf-stats-settings.conf`` on your Stats host.

2.7 Shibboleth configuration updates

------------------------------------

.. note::

  Skip this step unless you have ``shibboleth`` enabled in astakos

  ``IM_MODULES`` setting.

As of v0.15 astakos uses the ``REMOTE_USER`` header provided by apache's

``mod_shib2`` service in order to resolve the unique identifier which is used to

associate a shibboleth account to a local astakos user. Prior to this version

astakos adhered to the presence of the ``MOD_SHIB_EPPN`` header which although

safe enough on most of the ``SP`` deployment scenarios, it may cause issues in

certain cases, such as global wide IdP support or inability of supported IdPs

to release the ``eduPersonPrincipalName`` attribute. The ``REMOTE_USER`` header

can be set by administrators to match any of the available shibboleth

attributes.

If ``EPPN`` matches the service provider needs and you want to continue using

it as the unique identifier, you need to ensure that the ``REMOTE_USER``

attribute is set to ``eppn`` in the ``mod_shib2`` config file located at

``/etc/shibboleth/shibboleth2.xml`` 

.. code-block:: xml

    <!-- The ApplicationDefaults element is where most of Shibboleth's SAML bits are defined. -->

    <ApplicationDefaults entityID="https://sp.example.org/shibboleth" REMOTE_USER="eppn">

Otherwise, if ``EPPN`` doesn't suit the requirements for your ``SP``

deployment, change the ``REMOTE_USER`` attribute as required e.g.:

.. code-block:: xml

    <!-- The ApplicationDefaults element is where most of Shibboleth's SAML bits are defined. -->

    <ApplicationDefaults entityID="https://sp.example.org/shibboleth" REMOTE_USER="persistent-nameid persistent-id targeted-id">

and restart the ``shibd`` service:

.. code-block:: console

  $ service shibd restart

**notice** that every time you alter the ``REMOTE_USER`` attribute, all

existing shibboleth enabled astakos users will be invalidated and no longer be

able to login to their existing account using shibboleth. Specifically for the

case of switching from *eppn* to another attribute, astakos is able to prevent

invalidation and automatically migrate existing *eppn* accounts. In order to do

that, set the ``ASTAKOS_SHIBBOLETH_MIGRATE_EPPN`` setting to ``True`` in

``20-snf-astakos-app-settings.conf`` configuration file. Now every time an

existing *eppn* user logs in using shibboleth, astakos will update the associated 

*eppn* identifier to the contents of the ``REMOTE_USER`` header.

.. warning::

  IdPs should keep releasing the ``EPPN`` attribute in order for the migration

  to work.

3. Create floating IP pools

===========================

Synnefo v0.15 introduces floating IPs, which are public IPv4 addresses that can

dynamically be added/removed to/from VMs and are quotable via the

'cyclades.floating_ip' resource. Connecting a VM to a public network is only

allowed if the user has firstly created a floating IP from this network.

Floating IPs are created from networks that are marked as Floating IP pools.

Creation of floating IP pools is done with the `snf-manage network-create`

command using the `--floating-ip-pool` option.

Existing networks can be converted to floating IPs using `network-modify`

command:

.. code-block:: console

  snf-manage network-modify --floating-ip-pool=True <network_ID>

Already allocated public IPv4 addresses are not automatically converted to

floating IPs. Existing VMs can keep their IPv4 addresses which will be

automatically be released when these VMs will be destroyed. In order to

convert existing public IPs to floating IPs run the following command:

.. code-block:: console

 cyclades.host$ /usr/lib/synnefo/tools/update_to_floating_ips

or for just one network:

.. code-block:: console

 cyclades.host$ /usr/lib/synnefo/tools/update_to_floating_ips --network-id=<network_ID>

4. Register services and resources

==================================

4.1 Re-register service and resource definitions

------------------------------------------------

You will need to register again all Synnefo components, updating the

service and resource definitions. On the astakos node, run::

    astakos-host$ snf-component-register

This will detect that the Synnefo components are already registered and ask

to re-register. Answer positively. You need to enter the base URL and the UI

URL for each component, just like during the initial registration.

.. note::

   You can run ``snf-manage component-list -o name,ui_url`` to inspect the

   current registered UI URL. In the default installation, the base URL can

   be found by stripping ``/ui`` from the UI URL.

The meaning of resources ``cyclades.cpu`` and ``cyclades.ram`` has changed:

they now denote the number of CPUs and, respectively, RAM of *active* VMs

rather than all VMs. To represent total CPUs and total RAM, as previously,

new resources ``cyclades.total_cpu`` and ``cyclades.total_ram`` are

introduced. We now also control the usage of floating IPs through resource

``cyclades.floating_ip``.

4.2 Tweek resource settings

---------------------------

New resources (``cyclades.total_cpu``, ``cyclades.total_ram``, and

``cyclades.floating_ip``) are registered with infinite default base quota.

You will probably need to restrict them, especially

``cyclades.floating_ip``. In order to change the default for all *future*

users, for instance restricting floating IPs to 2, run::

    astakos-host$ snf-manage resource-modify cyclades.floating_ip --default-quota 2

Note that this command does not affect *existing* users any more. They can

still have infinite floating IPs. You can update base quota of existing

users in bulk, possibly excluding some users, with::

    astakos-host$ snf-manage user-modify --all --base-quota cyclades.floating_ip 2 --exclude uuid1,uuid2

.. note::

   You can inspect base quota with ``snf-manage quota-list`` before applying

   any changes, for example::

     # Get users with cyclades.vm base quota that differ from the default value

     astakos-host$ snf-manage quota-list --with-custom=True --filter-by "resource=cyclades.vm"

     # Get users with cyclades.vm base quota greater than 3

     astakos-host$ snf-manage quota-list --filter-by "resource=cyclades.vm,base_quota>3"

It is now possible to control whether a resource is visible for the users

through the API or the UI. Note that the system always checks resource

quota, regardless of their visibility. By default, ``cyclades.total_cpu``,

``cyclades.total_ram`` and ``astakos.pending_app`` are not visible. You can

change this behavior with::

    astakos-host$ snf-manage resource-modify <resource> --api-visible=True (or --ui-visible=True)

4.3 Update the Quotaholder

--------------------------

To update quota for all new or modified Cyclades resources, bring up Astakos::

    astakos-host$ service gunicorn start

and run on the Cyclades node::

   cyclades-host$ snf-manage reconcile-resources-cyclades --fix --force

5. Bring all services up

========================

After the upgrade is finished, we bring up all services:

.. code-block:: console

    astakos.host  # service gunicorn start

    cyclades.host # service gunicorn start

    pithos.host   # service gunicorn start

    cyclades.host # service snf-dispatcher start