-------------------
``ganeti-rapi`` reads users and passwords from a file (usually
-``/var/lib/ganeti/rapi_users``) on startup. After modifying the password
-file, ``ganeti-rapi`` must be restarted.
+``/var/lib/ganeti/rapi/users``) on startup. Changes to the file will be
+read automatically.
Each line consists of two or three fields separated by whitespace. The
first two fields are for username and password. The third field is
.. [#pwhash] Using the MD5 hash of username, realm and password is
- described in RFC2617_ ("HTTP Authentication"), sections 3.2.2.2 and
+ described in :rfc:`2617` ("HTTP Authentication"), sections 3.2.2.2 and
3.3. The reason for using it over another algorithm is forward
compatibility. If ``ganeti-rapi`` were to implement HTTP Digest
authentication in the future, the same hash could be used.
--------
The protocol used is JSON_ over HTTP designed after the REST_ principle.
-HTTP Basic authentication as per RFC2617_ is supported.
+HTTP Basic authentication as per :rfc:`2617` is supported.
.. _JSON: http://www.json.org/
.. _REST: http://en.wikipedia.org/wiki/Representational_State_Transfer
-.. _RFC2617: http://tools.ietf.org/rfc/rfc2617.txt
+
+
+A note on JSON as used by RAPI
+++++++++++++++++++++++++++++++
+
+JSON_ as used by Ganeti RAPI does not conform to the specification in
+:rfc:`4627`. Section 2 defines a JSON text to be either an object
+(``{"key": "value", …}``) or an array (``[1, 2, 3, …]``). In violation
+of this RAPI uses plain strings (``"master-candidate"``, ``"1234"``) for
+some requests or responses. Changing this now would likely break
+existing clients and cause a lot of trouble.
+
+.. highlight:: ruby
+
+Unlike Python's `JSON encoder and decoder
+<http://docs.python.org/library/json.html>`_, other programming
+languages or libraries may only provide a strict implementation, not
+allowing plain values. For those, responses can usually be wrapped in an
+array whose first element is then used, e.g. the response ``"1234"``
+becomes ``["1234"]``. This works equally well for more complex values.
+Example in Ruby::
+
+ require "json"
+
+ # Insert code to get response here
+ response = "\"1234\""
+
+ decoded = JSON.parse("[#{response}]").first
+
+Short of modifying the encoder to allow encoding to a less strict
+format, requests will have to be formatted by hand. Newer RAPI requests
+already use a dictionary as their input data and shouldn't cause any
+problems.
+
+
+PUT or POST?
+------------
+
+According to :rfc:`2616` the main difference between PUT and POST is
+that POST can create new resources but PUT can only create the resource
+the URI was pointing to on the PUT request.
+
+Unfortunately, due to historic reasons, the Ganeti RAPI library is not
+consistent with this usage, so just use the methods as documented below
+for each resource.
+
+For more details have a look in the source code at
+``lib/rapi/rlib2.py``.
+
+
+Generic parameter types
+-----------------------
+
+A few generic refered parameter types and the values they allow.
+
+``bool``
+++++++++
+
+A boolean option will accept ``1`` or ``0`` as numbers but not
+i.e. ``True`` or ``False``.
Generic parameters
------------------
``dry-run``
+++++++++++
-The optional *dry-run* argument, if provided and set to a positive
-integer value (e.g. ``?dry-run=1``), signals to Ganeti that the job
-should not be executed, only the pre-execution checks will be done.
+The boolean *dry-run* argument, if provided and set, signals to Ganeti
+that the job should not be executed, only the pre-execution checks will
+be done.
This is useful in trying to determine (without guarantees though, as in
the meantime the cluster state could have changed) if the operation is
You can access the API using your favorite programming language as long
as it supports network connections.
+Ganeti RAPI client
+++++++++++++++++++
+
+Ganeti includes a standalone RAPI client, ``lib/rapi/client.py``.
+
Shell
+++++
Redistribute configuration to all nodes. The result will be a job id.
+``/2/features``
++++++++++++++++
+
+``GET``
+~~~~~~~
+
+Returns a list of features supported by the RAPI server. Available
+features:
+
+``instance-create-reqv1``
+ Instance creation request data version 1 supported.
+``instance-reinstall-reqv1``
+ Instance reinstall supports body parameters.
+
+
+``/2/groups``
++++++++++++++
+
+The groups resource.
+
+It supports the following commands: ``GET``, ``POST``.
+
+``GET``
+~~~~~~~
+
+Returns a list of all existing node groups.
+
+Example::
+
+ [
+ {
+ "name": "group1",
+ "uri": "\/2\/groups\/group1"
+ },
+ {
+ "name": "group2",
+ "uri": "\/2\/groups\/group2"
+ }
+ ]
+
+If the optional bool *bulk* argument is provided and set to a true value
+(i.e ``?bulk=1``), the output contains detailed information about node
+groups as a list.
+
+Example::
+
+ [
+ {
+ "name": "group1",
+ "node_cnt": 2,
+ "node_list": [
+ "node1.example.com",
+ "node2.example.com"
+ ],
+ "uuid": "0d7d407c-262e-49af-881a-6a430034bf43"
+ },
+ {
+ "name": "group2",
+ "node_cnt": 1,
+ "node_list": [
+ "node3.example.com"
+ ],
+ "uuid": "f5a277e7-68f9-44d3-a378-4b25ecb5df5c"
+ }
+ ]
+
+``POST``
+~~~~~~~~
+
+Creates a node group.
+
+If the optional bool *dry-run* argument is provided, the job will not be
+actually executed, only the pre-execution checks will be done.
+
+Returns: a job ID that can be used later for polling.
+
+Body parameters:
+
+``name`` (string, required)
+ Node group name.
+
+
+``/2/groups/[group_name]``
+++++++++++++++++++++++++++
+
+Returns information about a node group.
+
+It supports the following commands: ``GET``, ``DELETE``.
+
+``GET``
+~~~~~~~
+
+Returns information about a node group, similar to the bulk output from
+the node group list.
+
+``DELETE``
+~~~~~~~~~~
+
+Deletes a node group.
+
+It supports the ``dry-run`` argument.
+
+
+``/2/groups/[group_name]/modify``
++++++++++++++++++++++++++++++++++
+
+Modifies the parameters of a node group.
+
+Supports the following commands: ``PUT``.
+
+``PUT``
+~~~~~~~
+
+Returns a job ID.
+
+Body parameters:
+
+``alloc_policy`` (string)
+ If present, the new allocation policy for the node group.
+
+
+``/2/groups/[group_name]/rename``
++++++++++++++++++++++++++++++++++
+
+Renames a node group.
+
+Supports the following commands: ``PUT``.
+
+``PUT``
+~~~~~~~
+
+Returns a job ID.
+
+Body parameters:
+
+``new_name`` (string, required)
+ New node group name.
+
+
``/2/instances``
++++++++++++++++
}
]
-If the optional *bulk* argument is provided and set to a true value (i.e
-``?bulk=1``), the output contains detailed information about instances
-as a list.
+If the optional bool *bulk* argument is provided and set to a true value
+(i.e ``?bulk=1``), the output contains detailed information about
+instances as a list.
Example::
Creates an instance.
-If the optional *dry-run* argument is provided and set to a positive
-integer valu (e.g. ``?dry-run=1``), the job will not be actually
-executed, only the pre-execution checks will be done. Query-ing the job
-result will return, in both dry-run and normal case, the list of nodes
-selected for the instance.
+If the optional bool *dry-run* argument is provided, the job will not be
+actually executed, only the pre-execution checks will be done. Query-ing
+the job result will return, in both dry-run and normal case, the list of
+nodes selected for the instance.
Returns: a job ID that can be used later for polling.
+Body parameters:
+
+``__version__`` (int, required)
+ Must be ``1`` (older Ganeti versions used a different format for
+ instance creation requests, version ``0``, but that format is not
+ documented).
+``mode`` (string, required)
+ Instance creation mode.
+``name`` (string, required)
+ Instance name.
+``disk_template`` (string, required)
+ Disk template for instance.
+``disks`` (list, required)
+ List of disk definitions. Example: ``[{"size": 100}, {"size": 5}]``.
+ Each disk definition must contain a ``size`` value and can contain an
+ optional ``mode`` value denoting the disk access mode (``ro`` or
+ ``rw``).
+``nics`` (list, required)
+ List of NIC (network interface) definitions. Example: ``[{}, {},
+ {"ip": "198.51.100.4"}]``. Each NIC definition can contain the
+ optional values ``ip``, ``mode``, ``link`` and ``bridge``.
+``os`` (string, required)
+ Instance operating system.
+``osparams`` (dictionary)
+ Dictionary with OS parameters. If not valid for the given OS, the job
+ will fail.
+``force_variant`` (bool)
+ Whether to force an unknown variant.
+``no_install`` (bool)
+ Do not install the OS (will enable no-start)
+``pnode`` (string)
+ Primary node.
+``snode`` (string)
+ Secondary node.
+``src_node`` (string)
+ Source node for import.
+``src_path`` (string)
+ Source directory for import.
+``start`` (bool)
+ Whether to start instance after creation.
+``ip_check`` (bool)
+ Whether to ensure instance's IP address is inactive.
+``name_check`` (bool)
+ Whether to ensure instance's name is resolvable.
+``file_storage_dir`` (string)
+ File storage directory.
+``file_driver`` (string)
+ File storage driver.
+``iallocator`` (string)
+ Instance allocator name.
+``source_handshake`` (list)
+ Signed handshake from source (remote import only).
+``source_x509_ca`` (string)
+ Source X509 CA in PEM format (remote import only).
+``source_instance_name`` (string)
+ Source instance name (remote import only).
+``hypervisor`` (string)
+ Hypervisor name.
+``hvparams`` (dict)
+ Hypervisor parameters, hypervisor-dependent.
+``beparams`` (dict)
+ Backend parameters.
+
+
``/2/instances/[instance_name]``
++++++++++++++++++++++++++++++++
Reboots the instance.
-The URI takes optional ``type=hard|soft|full`` and
-``ignore_secondaries=False|True`` parameters.
+The URI takes optional ``type=soft|hard|full`` and
+``ignore_secondaries=0|1`` parameters.
+
+``type`` defines the reboot type. ``soft`` is just a normal reboot,
+without terminating the hypervisor. ``hard`` means full shutdown
+(including terminating the hypervisor process) and startup again.
+``full`` is like ``hard`` but also recreates the configuration from
+ground up as if you would have done a ``gnt-instance shutdown`` and
+``gnt-instance start`` on it.
+
+``ignore_secondaries`` is a bool argument indicating if we start the
+instance even if secondary disks are failing.
It supports the ``dry-run`` argument.
Startup an instance.
-The URI takes an optional ``force=False|True`` parameter to start the
-instance if even if secondary disks are failing.
+The URI takes an optional ``force=1|0`` parameter to start the
+instance even if secondary disks are failing.
It supports the ``dry-run`` argument.
``POST``
~~~~~~~~
-Takes the parameters ``os`` (OS template name) and ``nostartup`` (bool).
+Returns a job ID.
+
+Body parameters:
+
+``os`` (string, required)
+ Instance operating system.
+``start`` (bool, defaults to true)
+ Whether to start instance after reinstallation.
+``osparams`` (dict)
+ Dictionary with (temporary) OS parameters.
+
+For backwards compatbility, this resource also takes the query
+parameters ``os`` (OS template name) and ``nostartup`` (bool). New
+clients should use the body parameters.
``/2/instances/[instance_name]/replace-disks``
``replace_auto``), ``disks`` (comma separated list of disk indexes),
``remote_node`` and ``iallocator``.
+Either ``remote_node`` or ``iallocator`` needs to be defined when using
+``mode=replace_new_secondary``.
+
+``mode`` is a mandatory parameter. ``replace_auto`` tries to determine
+the broken disk(s) on its own and replacing it.
+
``/2/instances/[instance_name]/activate-disks``
+++++++++++++++++++++++++++++++++++++++++++++++
``PUT``
~~~~~~~
-Takes the parameter ``ignore_size``. When set ignore the recorded
+Takes the bool parameter ``ignore_size``. When set ignore the recorded
size (useful for forcing activation when recorded size is wrong).
Takes no parameters.
+``/2/instances/[instance_name]/prepare-export``
++++++++++++++++++++++++++++++++++++++++++++++++++
+
+Prepares an export of an instance.
+
+It supports the following commands: ``PUT``.
+
+``PUT``
+~~~~~~~
+
+Takes one parameter, ``mode``, for the export mode. Returns a job ID.
+
+
+``/2/instances/[instance_name]/export``
++++++++++++++++++++++++++++++++++++++++++++++++++
+
+Exports an instance.
+
+It supports the following commands: ``PUT``.
+
+``PUT``
+~~~~~~~
+
+Returns a job ID.
+
+Body parameters:
+
+``mode`` (string)
+ Export mode.
+``destination`` (required)
+ Destination information, depends on export mode.
+``shutdown`` (bool, required)
+ Whether to shutdown instance before export.
+``remove_instance`` (bool)
+ Whether to remove instance after export.
+``x509_key_name``
+ Name of X509 key (remote export only).
+``destination_x509_ca``
+ Destination X509 CA (remote export only).
+
+
+``/2/instances/[instance_name]/migrate``
+++++++++++++++++++++++++++++++++++++++++
+
+Migrates an instance.
+
+Supports the following commands: ``PUT``.
+
+``PUT``
+~~~~~~~
+
+Returns a job ID.
+
+Body parameters:
+
+``mode`` (string)
+ Migration mode.
+``cleanup`` (bool)
+ Whether a previously failed migration should be cleaned up.
+
+
+``/2/instances/[instance_name]/rename``
+++++++++++++++++++++++++++++++++++++++++
+
+Renames an instance.
+
+Supports the following commands: ``PUT``.
+
+``PUT``
+~~~~~~~
+
+Returns a job ID.
+
+Body parameters:
+
+``new_name`` (string, required)
+ New instance name.
+``ip_check`` (bool)
+ Whether to ensure instance's IP address is inactive.
+``name_check`` (bool)
+ Whether to ensure instance's name is resolvable.
+
+
+``/2/instances/[instance_name]/modify``
+++++++++++++++++++++++++++++++++++++++++
+
+Modifies an instance.
+
+Supports the following commands: ``PUT``.
+
+``PUT``
+~~~~~~~
+
+Returns a job ID.
+
+Body parameters:
+
+``osparams`` (dict)
+ Dictionary with OS parameters.
+``hvparams`` (dict)
+ Hypervisor parameters, hypervisor-dependent.
+``beparams`` (dict)
+ Backend parameters.
+``force`` (bool)
+ Whether to force the operation.
+``nics`` (list)
+ List of NIC changes. Each item is of the form ``(op, settings)``.
+ ``op`` can be ``add`` to add a new NIC with the specified settings,
+ ``remove`` to remove the last NIC or a number to modify the settings
+ of the NIC with that index.
+``disks`` (list)
+ List of disk changes. See ``nics``.
+``disk_template`` (string)
+ Disk template for instance.
+``remote_node`` (string)
+ Secondary node (used when changing disk template).
+``os_name`` (string)
+ Change instance's OS name. Does not reinstall the instance.
+``force_variant`` (bool)
+ Whether to force an unknown variant.
+
+
``/2/instances/[instance_name]/tags``
+++++++++++++++++++++++++++++++++++++
Cancel a not-yet-started job.
+
+``/2/jobs/[job_id]/wait``
++++++++++++++++++++++++++
+
+``GET``
+~~~~~~~
+
+Waits for changes on a job. Takes the following body parameters in a
+dict:
+
+``fields``
+ The job fields on which to watch for changes.
+
+``previous_job_info``
+ Previously received field values or None if not yet available.
+
+``previous_log_serial``
+ Highest log serial number received so far or None if not yet
+ available.
+
+Returns None if no changes have been detected and a dict with two keys,
+``job_info`` and ``log_entries`` otherwise.
+
+
``/2/nodes``
++++++++++++
~~~~~~~~
To evacuate a node, either one of the ``iallocator`` or ``remote_node``
-parameters must be passed:
+parameters must be passed::
evacuate?iallocator=[iallocator]
evacuate?remote_node=[nodeX.example.com]
+The result value will be a list, each element being a triple of the job
+id (for this specific evacuation), the instance which is being evacuated
+by this job, and the node to which it is being relocated. In case the
+node is already empty, the result will be an empty list (without any
+jobs being submitted).
+
+And additional parameter ``early_release`` signifies whether to try to
+parallelize the evacuations, at the risk of increasing I/O contention
+and increasing the chances of data loss, if the primary node of any of
+the instances being evacuated is not fully healthy.
+
+If the dry-run parameter was specified, then the evacuation jobs were
+not actually submitted, and the job IDs will be null.
+
+
``/2/nodes/[node_name]/migrate``
+++++++++++++++++++++++++++++++++
``POST``
~~~~~~~~
-No parameters are required, but ``live`` can be set to a boolean value.
+If no mode is explicitly specified, each instances' hypervisor default
+migration mode will be used. Query parameters:
+
+``live`` (bool)
+ If set, use live migration if available.
+``mode`` (string)
+ Sets migration mode, ``live`` for live migration and ``non-live`` for
+ non-live migration. Supported by Ganeti 2.2 and above.
- migrate?live=[0|1]
``/2/nodes/[node_name]/role``
+++++++++++++++++++++++++++++
The request is a string which should be PUT to this URI. The result will
be a job id.
-It supports the ``force`` argument.
+It supports the bool ``force`` argument.
``/2/nodes/[node_name]/storage``
++++++++++++++++++++++++++++++++