Developer notes
===============
+.. highlight:: shell-example
+
Build dependencies
------------------
-Most dependencies from :doc:`install-quick`, plus:
+Most dependencies from :doc:`install-quick`, including ``qemu-img``
+(marked there as optional) plus (for Python):
- `GNU make <http://www.gnu.org/software/make/>`_
- `GNU tar <http://www.gnu.org/software/tar/>`_
- `Gzip <http://www.gnu.org/software/gzip/>`_
-- `Docbook tools <http://sources.redhat.com/docbook-tools/>`_
- (docbook2html and docbook2man)
+- `pandoc <http://johnmacfarlane.net/pandoc/>`_
+- `python-epydoc <http://epydoc.sourceforge.net/>`_
- `python-sphinx <http://sphinx.pocoo.org/>`_
- (tested with version 0.6.1)
+ (tested with version 1.1.3)
- `graphviz <http://www.graphviz.org/>`_
+- the `en_US.UTF-8` locale must be enabled on the system
+- `pylint <http://www.logilab.org/857>`_ and its associated
+ dependencies
+- `pep8 <https://github.com/jcrocholl/pep8/>`_
+
+For older developement (Ganeti < 2.4) ``docbook`` was used instead
+``pandoc``.
+
+Note that for pylint, at the current moment the following versions
+must be used::
+
+ $ pylint --version
+ pylint 0.21.1,
+ astng 0.20.1, common 0.50.3
+
+The same with pep8, other versions may give you errors::
+
+ $ pep8 --version
+ 1.2
To generate unittest coverage reports (``make coverage``), `coverage
<http://pypi.python.org/pypi/coverage>`_ needs to be installed.
+Installation of all dependencies listed here::
+
+ $ apt-get install python-setuptools
+ $ apt-get install pandoc python-epydoc graphviz
+ $ cd / && sudo easy_install \
+ sphinx \
+ logilab-astng==0.20.1 \
+ logilab-common==0.50.3 \
+ pylint==0.21.1 \
+ pep8==1.2 \
+ coverage
+
+For Haskell development, again all things from the quick install
+document, plus:
+
+- `haddock <http://www.haskell.org/haddock/>`_, documentation
+ generator (equivalent to epydoc for Python)
+- `HsColour <http://hackage.haskell.org/package/hscolour>`_, again
+ used for documentation (it's source-code pretty-printing)
+- `hlint <http://community.haskell.org/~ndm/hlint/>`_, a source code
+ linter (equivalent to pylint for Python), recommended version 1.8 or
+ above (tested with 1.8.15)
+- the `QuickCheck <http://hackage.haskell.org/package/QuickCheck>`_
+ library, version 2.x
+- the `HUnit <http://hunit.sourceforge.net/>`_ library (tested with
+ 1.2.x)
+- the `test-framework
+ <http://batterseapower.github.com/test-framework/>`_ libraries,
+ tested versions: ``test-framework``: 0.6, ``test-framework-hunit``:
+ 0.2.7, ``test-framework-quickcheck2``: 0.2.12
+- ``hpc``, which comes with the compiler, so you should already have
+ it
+- `shelltestrunner <http://joyful.com/shelltestrunner>`_, used for
+ running shell-based unit-tests
+
+Under Debian Wheezy or later, these can be installed (on top of the
+required ones from the quick install document) via::
+
+ $ apt-get install libghc-quickcheck2-dev libghc-hunit-dev \
+ libghc-test-framework-dev \
+ libghc-test-framework-quickcheck2-dev \
+ libghc-test-framework-hunit-dev \
+ hscolour hlint
+
+Or alternatively via ``cabal``::
+
+ $ cabal install QuickCheck HUnit \
+ test-framework test-framework-quickcheck2 test-framework-hunit \
+ hscolour hlint shelltestrunner
+
Configuring for development
---------------------------
-.. highlight:: sh
-
Run the following command (only use ``PYTHON=...`` if you need to use a
different python version)::
- ./autogen.sh && \
- ./configure PYTHON=python2.4 \
- --prefix=/usr/local --sysconfdir=/etc --localstatedir=/var
+ $ ./autogen.sh && \
+ ./configure --prefix=/usr/local --sysconfdir=/etc --localstatedir=/var
+
+Haskell development notes
+-------------------------
+
+There are a few things which can help writing or debugging the Haskell
+code.
+
+You can run the Haskell linter :command:`hlint` via::
+
+ $ make hlint
+
+This is not enabled by default (as the htools component is
+optional). The above command will generate both output on the terminal
+and, if any warnings are found, also an HTML report at
+``doc/hs-lint.html``.
+
+When writing or debugging TemplateHaskell code, it's useful to see
+what the splices are converted to. This can be done via::
+
+ $ make HEXTRA="-ddump-splices"
+
+Due to the way TemplateHaskell works, it's not straightforward to
+build profiling code. The recommended way is to run ``make hs-prof``,
+or alternatively the manual sequence is::
+
+ $ make clean
+ $ make htools/htools HEXTRA="-osuf .o"
+ $ rm htools/htools
+ $ make htools/htools HEXTRA="-osuf .prof_o -prof -auto-all"
+
+This will build the binary twice, per the TemplateHaskell
+documentation, the second one with profiling enabled.
Packaging notes
This script, in the source code as ``daemons/daemon-util.in``, is used
to start/stop Ganeti and do a few other things related to system
-daemons. Is is recommended to use ``daemon-util`` also from the system's
+daemons. It is recommended to use ``daemon-util`` also from the system's
init scripts. That way the code starting and stopping daemons is shared
and future changes have to be made in only one place.