import re
import time
import errno
+import pyparsing as pyp
+import os
from ganeti import utils
from ganeti import logger
from ganeti import errors
+from ganeti import constants
class BlockDev(object):
- online (=used, or ready for use)
A device can also be online but read-only, however we are not using
- the readonly state (MD and LV have it, if needed in the future)
- and we are usually looking at this like at a stack, so it's easier
- to conceptualise the transition from not-existing to online and back
+ the readonly state (LV has it, if needed in the future) and we are
+ usually looking at this like at a stack, so it's easier to
+ conceptualise the transition from not-existing to online and back
like a linear one.
The many different states of the device are due to the fact that we
need to cover many device types:
- logical volumes are created, lvchange -a y $lv, and used
- - md arrays are created or assembled and used
- drbd devices are attached to a local disk/remote peer and made primary
- The status of the device can be examined by `GetStatus()`, which
- returns a numerical value, depending on the position in the
- transition stack of the device.
-
A block device is identified by three items:
- the /dev path of the device (dynamic)
- a unique ID of the device (static)
Not all devices implement both the first two as distinct items. LVM
logical volumes have their unique ID (the pair volume group, logical
- volume name) in a 1-to-1 relation to the dev path. For MD devices,
- the /dev path is dynamic and the unique ID is the UUID generated at
- array creation plus the slave list. For DRBD devices, the /dev path
- is again dynamic and the unique id is the pair (host1, dev1),
- (host2, dev2).
+ volume name) in a 1-to-1 relation to the dev path. For DRBD devices,
+ the /dev path is again dynamic and the unique id is the pair (host1,
+ dev1), (host2, dev2).
You can get to a device in two ways:
- creating the (real) device, which returns you
- an attached instance (lvcreate, mdadm --create)
+ an attached instance (lvcreate)
- attaching of a python instance to an existing (real) device
The second point, the attachement to a device, is different
after assembly we'll have our correct major/minor.
"""
- STATUS_UNKNOWN = 0
- STATUS_EXISTING = 1
- STATUS_STANDBY = 2
- STATUS_ONLINE = 3
-
- STATUS_MAP = {
- STATUS_UNKNOWN: "unknown",
- STATUS_EXISTING: "existing",
- STATUS_STANDBY: "ready for use",
- STATUS_ONLINE: "online",
- }
-
-
def __init__(self, unique_id, children):
self._children = children
self.dev_path = None
self.major = None
self.minor = None
-
def Assemble(self):
"""Assemble the device from its components.
status = status and child.Assemble()
if not status:
break
- status = status and child.Open()
+
+ try:
+ child.Open()
+ except errors.BlockDeviceError:
+ for child in self._children:
+ child.Shutdown()
+ raise
if not status:
for child in self._children:
child.Shutdown()
return status
-
def Attach(self):
"""Find a device which matches our config and attach to it.
"""
raise NotImplementedError
-
def Close(self):
"""Notifies that the device will no longer be used for I/O.
"""
raise NotImplementedError
-
@classmethod
def Create(cls, unique_id, children, size):
"""Create the device.
"""
raise NotImplementedError
-
def Remove(self):
"""Remove this device.
- This makes sense only for some of the device types: LV and to a
- lesser degree, md devices. Also note that if the device can't
- attach, the removal can't be completed.
+ This makes sense only for some of the device types: LV and file
+ storeage. Also note that if the device can't attach, the removal
+ can't be completed.
"""
raise NotImplementedError
+ def Rename(self, new_id):
+ """Rename this device.
- def GetStatus(self):
- """Return the status of the device.
+ This may or may not make sense for a given device type.
"""
raise NotImplementedError
-
def Open(self, force=False):
"""Make the device ready for use.
"""
raise NotImplementedError
-
def Shutdown(self):
"""Shut down the device, freeing its children.
"""
raise NotImplementedError
-
def SetSyncSpeed(self, speed):
"""Adjust the sync speed of the mirror.
result = result and child.SetSyncSpeed(speed)
return result
-
def GetSyncStatus(self):
"""Returns the sync status of the device.
status of the mirror.
Returns:
- (sync_percent, estimated_time, is_degraded)
+ (sync_percent, estimated_time, is_degraded, ldisk)
+
+ If sync_percent is None, it means the device is not syncing.
- If sync_percent is None, it means all is ok
If estimated_time is None, it means we can't estimate
- the time needed, otherwise it's the time left in seconds
+ the time needed, otherwise it's the time left in seconds.
+
If is_degraded is True, it means the device is missing
redundancy. This is usually a sign that something went wrong in
the device setup, if sync_percent is None.
+ The ldisk parameter represents the degradation of the local
+ data. This is only valid for some devices, the rest will always
+ return False (not degraded).
+
"""
- return None, None, False
+ return None, None, False, False
def CombinedSyncStatus(self):
children.
"""
- min_percent, max_time, is_degraded = self.GetSyncStatus()
+ min_percent, max_time, is_degraded, ldisk = self.GetSyncStatus()
if self._children:
for child in self._children:
- c_percent, c_time, c_degraded = child.GetSyncStatus()
+ c_percent, c_time, c_degraded, c_ldisk = child.GetSyncStatus()
if min_percent is None:
min_percent = c_percent
elif c_percent is not None:
elif c_time is not None:
max_time = max(max_time, c_time)
is_degraded = is_degraded or c_degraded
- return min_percent, max_time, is_degraded
+ ldisk = ldisk or c_ldisk
+ return min_percent, max_time, is_degraded, ldisk
def SetInfo(self, text):
for child in self._children:
child.SetInfo(text)
+ def Grow(self, amount):
+ """Grow the block device.
+
+ Arguments:
+ amount: the amount (in mebibytes) to grow with
+
+ Returns: None
+
+ """
+ raise NotImplementedError
def __repr__(self):
return ("<%s: unique_id: %s, children: %s, %s:%s, %s>" %
raise ValueError("Invalid configuration data %s" % str(unique_id))
self._vg_name, self._lv_name = unique_id
self.dev_path = "/dev/%s/%s" % (self._vg_name, self._lv_name)
+ self._degraded = True
+ self.major = self.minor = None
self.Attach()
-
@classmethod
def Create(cls, unique_id, children, size):
"""Create a new logical volume.
result = utils.RunCmd(["lvcreate", "-L%dm" % size, "-n%s" % lv_name,
vg_name] + pvlist)
if result.failed:
- raise errors.BlockDeviceError(result.fail_reason)
+ raise errors.BlockDeviceError("%s - %s" % (result.fail_reason,
+ result.output))
return LogicalVolume(unique_id, children)
@staticmethod
"--separator=:"]
result = utils.RunCmd(command)
if result.failed:
- logger.Error("Can't get the PV information: %s" % result.fail_reason)
+ logger.Error("Can't get the PV information: %s - %s" %
+ (result.fail_reason, result.output))
return None
data = []
for line in result.stdout.splitlines():
result = utils.RunCmd(["lvremove", "-f", "%s/%s" %
(self._vg_name, self._lv_name)])
if result.failed:
- logger.Error("Can't lvremove: %s" % result.fail_reason)
+ logger.Error("Can't lvremove: %s - %s" %
+ (result.fail_reason, result.output))
return not result.failed
+ def Rename(self, new_id):
+ """Rename this logical volume.
+
+ """
+ if not isinstance(new_id, (tuple, list)) or len(new_id) != 2:
+ raise errors.ProgrammerError("Invalid new logical id '%s'" % new_id)
+ new_vg, new_name = new_id
+ if new_vg != self._vg_name:
+ raise errors.ProgrammerError("Can't move a logical volume across"
+ " volume groups (from %s to to %s)" %
+ (self._vg_name, new_vg))
+ result = utils.RunCmd(["lvrename", new_vg, self._lv_name, new_name])
+ if result.failed:
+ raise errors.BlockDeviceError("Failed to rename the logical volume: %s" %
+ result.output)
+ self._lv_name = new_name
+ self.dev_path = "/dev/%s/%s" % (self._vg_name, self._lv_name)
def Attach(self):
"""Attach to an existing LV.
This method will try to see if an existing and active LV exists
- which matches the our name. If so, its major/minor will be
+ which matches our name. If so, its major/minor will be
recorded.
"""
- result = utils.RunCmd(["lvdisplay", self.dev_path])
+ result = utils.RunCmd(["lvs", "--noheadings", "--separator=,",
+ "-olv_attr,lv_kernel_major,lv_kernel_minor",
+ self.dev_path])
if result.failed:
- logger.Error("Can't find LV %s: %s" %
- (self.dev_path, result.fail_reason))
+ logger.Error("Can't find LV %s: %s, %s" %
+ (self.dev_path, result.fail_reason, result.output))
return False
- match = re.compile("^ *Block device *([0-9]+):([0-9]+).*$")
- for line in result.stdout.splitlines():
- match_result = match.match(line)
- if match_result:
- self.major = int(match_result.group(1))
- self.minor = int(match_result.group(2))
- return True
- return False
+ out = result.stdout.strip().rstrip(',')
+ out = out.split(",")
+ if len(out) != 3:
+ logger.Error("Can't parse LVS output, len(%s) != 3" % str(out))
+ return False
+
+ status, major, minor = out[:3]
+ if len(status) != 6:
+ logger.Error("lvs lv_attr is not 6 characters (%s)" % status)
+ return False
+
+ try:
+ major = int(major)
+ minor = int(minor)
+ except ValueError, err:
+ logger.Error("lvs major/minor cannot be parsed: %s" % str(err))
+ self.major = major
+ self.minor = minor
+ self._degraded = status[0] == 'v' # virtual volume, i.e. doesn't backing
+ # storage
+ return True
def Assemble(self):
"""Assemble the device.
- This is a no-op for the LV device type. Eventually, we could
- lvchange -ay here if we see that the LV is not active.
+ We alway run `lvchange -ay` on the LV to ensure it's active before
+ use, as there were cases when xenvg was not active after boot
+ (also possibly after disk issues).
"""
- return True
-
+ result = utils.RunCmd(["lvchange", "-ay", self.dev_path])
+ if result.failed:
+ logger.Error("Can't activate lv %s: %s" % (self.dev_path, result.output))
+ return not result.failed
def Shutdown(self):
"""Shutdown the device.
"""
return True
+ def GetSyncStatus(self):
+ """Returns the sync status of the device.
- def GetStatus(self):
- """Return the status of the device.
+ If this device is a mirroring device, this function returns the
+ status of the mirror.
- Logical volumes will can be in all four states, although we don't
- deactivate (lvchange -an) them when shutdown, so STATUS_EXISTING
- should not be seen for our devices.
+ Returns:
+ (sync_percent, estimated_time, is_degraded, ldisk)
- """
- result = utils.RunCmd(["lvs", "--noheadings", "-olv_attr", self.dev_path])
- if result.failed:
- logger.Error("Can't display lv: %s" % result.fail_reason)
- return self.STATUS_UNKNOWN
- out = result.stdout.strip()
- # format: type/permissions/alloc/fixed_minor/state/open
- if len(out) != 6:
- return self.STATUS_UNKNOWN
- #writable = (out[1] == "w")
- active = (out[4] == "a")
- online = (out[5] == "o")
- if online:
- retval = self.STATUS_ONLINE
- elif active:
- retval = self.STATUS_STANDBY
- else:
- retval = self.STATUS_EXISTING
+ For logical volumes, sync_percent and estimated_time are always
+ None (no recovery in progress, as we don't handle the mirrored LV
+ case). The is_degraded parameter is the inverse of the ldisk
+ parameter.
- return retval
+ For the ldisk parameter, we check if the logical volume has the
+ 'virtual' type, which means it's not backed by existing storage
+ anymore (read from it return I/O error). This happens after a
+ physical disk failure and subsequent 'vgreduce --removemissing' on
+ the volume group.
+ The status was already read in Attach, so we just return it.
+
+ """
+ return None, None, self._degraded, self._degraded
def Open(self, force=False):
"""Make the device ready for I/O.
This is a no-op for the LV device type.
"""
- return True
-
+ pass
def Close(self):
"""Notifies that the device will no longer be used for I/O.
This is a no-op for the LV device type.
"""
- return True
-
+ pass
def Snapshot(self, size):
"""Create a snapshot copy of an lvm block device.
result = utils.RunCmd(["lvcreate", "-L%dm" % size, "-s",
"-n%s" % snap_name, self.dev_path])
if result.failed:
- raise errors.BlockDeviceError("command: %s error: %s" %
- (result.cmd, result.fail_reason))
+ raise errors.BlockDeviceError("command: %s error: %s - %s" %
+ (result.cmd, result.fail_reason,
+ result.output))
return snap_name
-
def SetInfo(self, text):
"""Update metadata with info text.
result = utils.RunCmd(["lvchange", "--addtag", text,
self.dev_path])
if result.failed:
- raise errors.BlockDeviceError("Command: %s error: %s" %
- (result.cmd, result.fail_reason))
-
+ raise errors.BlockDeviceError("Command: %s error: %s - %s" %
+ (result.cmd, result.fail_reason,
+ result.output))
+ def Grow(self, amount):
+ """Grow the logical volume.
-class MDRaid1(BlockDev):
- """raid1 device implemented via md.
-
- """
- def __init__(self, unique_id, children):
- super(MDRaid1, self).__init__(unique_id, children)
- self.major = 9
- self.Attach()
+ """
+ # we try multiple algorithms since the 'best' ones might not have
+ # space available in the right place, but later ones might (since
+ # they have less constraints); also note that only recent LVM
+ # supports 'cling'
+ for alloc_policy in "contiguous", "cling", "normal":
+ result = utils.RunCmd(["lvextend", "--alloc", alloc_policy,
+ "-L", "+%dm" % amount, self.dev_path])
+ if not result.failed:
+ return
+ raise errors.BlockDeviceError("Can't grow LV %s: %s" %
+ (self.dev_path, result.output))
- def Attach(self):
- """Find an array which matches our config and attach to it.
+class DRBD8Status(object):
+ """A DRBD status representation class.
- This tries to find a MD array which has the same UUID as our own.
+ Note that this doesn't support unconfigured devices (cs:Unconfigured).
- """
- minor = self._FindMDByUUID(self.unique_id)
- if minor is not None:
- self._SetFromMinor(minor)
+ """
+ LINE_RE = re.compile(r"\s*[0-9]+:\s*cs:(\S+)\s+st:([^/]+)/(\S+)"
+ "\s+ds:([^/]+)/(\S+)\s+.*$")
+ SYNC_RE = re.compile(r"^.*\ssync'ed:\s*([0-9.]+)%.*"
+ "\sfinish: ([0-9]+):([0-9]+):([0-9]+)\s.*$")
+
+ def __init__(self, procline):
+ m = self.LINE_RE.match(procline)
+ if not m:
+ raise errors.BlockDeviceError("Can't parse input data '%s'" % procline)
+ self.cstatus = m.group(1)
+ self.lrole = m.group(2)
+ self.rrole = m.group(3)
+ self.ldisk = m.group(4)
+ self.rdisk = m.group(5)
+
+ self.is_standalone = self.cstatus == "StandAlone"
+ self.is_wfconn = self.cstatus == "WFConnection"
+ self.is_connected = self.cstatus == "Connected"
+ self.is_primary = self.lrole == "Primary"
+ self.is_secondary = self.lrole == "Secondary"
+ self.peer_primary = self.rrole == "Primary"
+ self.peer_secondary = self.rrole == "Secondary"
+ self.both_primary = self.is_primary and self.peer_primary
+ self.both_secondary = self.is_secondary and self.peer_secondary
+
+ self.is_diskless = self.ldisk == "Diskless"
+ self.is_disk_uptodate = self.ldisk == "UpToDate"
+
+ m = self.SYNC_RE.match(procline)
+ if m:
+ self.sync_percent = float(m.group(1))
+ hours = int(m.group(2))
+ minutes = int(m.group(3))
+ seconds = int(m.group(4))
+ self.est_time = hours * 3600 + minutes * 60 + seconds
else:
- self.minor = None
- self.dev_path = None
+ self.sync_percent = None
+ self.est_time = None
- return (minor is not None)
+ self.is_sync_target = self.peer_sync_source = self.cstatus == "SyncTarget"
+ self.peer_sync_target = self.is_sync_source = self.cstatus == "SyncSource"
+ self.is_resync = self.is_sync_target or self.is_sync_source
- @staticmethod
- def _GetUsedDevs():
- """Compute the list of in-use MD devices.
+class BaseDRBD(BlockDev):
+ """Base DRBD class.
- It doesn't matter if the used device have other raid level, just
- that they are in use.
+ This class contains a few bits of common functionality between the
+ 0.7 and 8.x versions of DRBD.
- """
- mdstat = open("/proc/mdstat", "r")
- data = mdstat.readlines()
- mdstat.close()
+ """
+ _VERSION_RE = re.compile(r"^version: (\d+)\.(\d+)\.(\d+)"
+ r" \(api:(\d+)/proto:(\d+)(?:-(\d+))?\)")
- used_md = {}
- valid_line = re.compile("^md([0-9]+) : .*$")
- for line in data:
- match = valid_line.match(line)
- if match:
- md_no = int(match.group(1))
- used_md[md_no] = line
+ _DRBD_MAJOR = 147
+ _ST_UNCONFIGURED = "Unconfigured"
+ _ST_WFCONNECTION = "WFConnection"
+ _ST_CONNECTED = "Connected"
- return used_md
+ _STATUS_FILE = "/proc/drbd"
+ @staticmethod
+ def _GetProcData(filename=_STATUS_FILE):
+ """Return data from /proc/drbd.
+
+ """
+ stat = open(filename, "r")
+ try:
+ data = stat.read().splitlines()
+ finally:
+ stat.close()
+ if not data:
+ raise errors.BlockDeviceError("Can't read any data from %s" % filename)
+ return data
@staticmethod
- def _GetDevInfo(minor):
- """Get info about a MD device.
+ def _MassageProcData(data):
+ """Transform the output of _GetProdData into a nicer form.
- Currently only uuid is returned.
+ Returns:
+ a dictionary of minor: joined lines from /proc/drbd for that minor
"""
- result = utils.RunCmd(["mdadm", "-D", "/dev/md%d" % minor])
- if result.failed:
- logger.Error("Can't display md: %s" % result.fail_reason)
- return None
- retval = {}
- for line in result.stdout.splitlines():
- line = line.strip()
- kv = line.split(" : ", 1)
- if kv:
- if kv[0] == "UUID":
- retval["uuid"] = kv[1].split()[0]
- elif kv[0] == "State":
- retval["state"] = kv[1].split(", ")
- return retval
+ lmatch = re.compile("^ *([0-9]+):.*$")
+ results = {}
+ old_minor = old_line = None
+ for line in data:
+ lresult = lmatch.match(line)
+ if lresult is not None:
+ if old_minor is not None:
+ results[old_minor] = old_line
+ old_minor = int(lresult.group(1))
+ old_line = line
+ else:
+ if old_minor is not None:
+ old_line += " " + line.strip()
+ # add last line
+ if old_minor is not None:
+ results[old_minor] = old_line
+ return results
+ @classmethod
+ def _GetVersion(cls):
+ """Return the DRBD version.
+
+ This will return a dict with keys:
+ k_major,
+ k_minor,
+ k_point,
+ api,
+ proto,
+ proto2 (only on drbd > 8.2.X)
+
+ """
+ proc_data = cls._GetProcData()
+ first_line = proc_data[0].strip()
+ version = cls._VERSION_RE.match(first_line)
+ if not version:
+ raise errors.BlockDeviceError("Can't parse DRBD version from '%s'" %
+ first_line)
+
+ values = version.groups()
+ retval = {'k_major': int(values[0]),
+ 'k_minor': int(values[1]),
+ 'k_point': int(values[2]),
+ 'api': int(values[3]),
+ 'proto': int(values[4]),
+ }
+ if values[5] is not None:
+ retval['proto2'] = values[5]
- @staticmethod
- def _FindUnusedMinor():
- """Compute an unused MD minor.
+ return retval
- This code assumes that there are 256 minors only.
+ @staticmethod
+ def _DevPath(minor):
+ """Return the path to a drbd device for a given minor.
"""
- used_md = MDRaid1._GetUsedDevs()
- i = 0
- while i < 256:
- if i not in used_md:
- break
- i += 1
- if i == 256:
- logger.Error("Critical: Out of md minor numbers.")
- return None
- return i
-
+ return "/dev/drbd%d" % minor
@classmethod
- def _FindMDByUUID(cls, uuid):
- """Find the minor of an MD array with a given UUID.
+ def _GetUsedDevs(cls):
+ """Compute the list of used DRBD devices.
"""
- md_list = cls._GetUsedDevs()
- for minor in md_list:
- info = cls._GetDevInfo(minor)
- if info and info["uuid"] == uuid:
- return minor
- return None
+ data = cls._GetProcData()
+ used_devs = {}
+ valid_line = re.compile("^ *([0-9]+): cs:([^ ]+).*$")
+ for line in data:
+ match = valid_line.match(line)
+ if not match:
+ continue
+ minor = int(match.group(1))
+ state = match.group(2)
+ if state == cls._ST_UNCONFIGURED:
+ continue
+ used_devs[minor] = state, line
- @staticmethod
- def _ZeroSuperblock(dev_path):
- """Zero the possible locations for an MD superblock.
+ return used_devs
- The zero-ing can't be done via ``mdadm --zero-superblock`` as that
- fails in versions 2.x with the same error code as non-writable
- device.
+ def _SetFromMinor(self, minor):
+ """Set our parameters based on the given minor.
- The superblocks are located at (negative values are relative to
- the end of the block device):
- - -128k to end for version 0.90 superblock
- - -8k to -12k for version 1.0 superblock (included in the above)
- - 0k to 4k for version 1.1 superblock
- - 4k to 8k for version 1.2 superblock
+ This sets our minor variable and our dev_path.
- To cover all situations, the zero-ing will be:
- - 0k to 128k
- - -128k to end
+ """
+ if minor is None:
+ self.minor = self.dev_path = None
+ else:
+ self.minor = minor
+ self.dev_path = self._DevPath(minor)
- As such, the minimum device size must be 128k, otherwise we'll get
- I/O errors.
+ @staticmethod
+ def _CheckMetaSize(meta_device):
+ """Check if the given meta device looks like a valid one.
- Note that this function depends on the fact that one can open,
- read and write block devices normally.
+ This currently only check the size, which must be around
+ 128MiB.
"""
- overwrite_size = 128 * 1024
- empty_buf = '\0' * overwrite_size
- fd = open(dev_path, "r+")
+ result = utils.RunCmd(["blockdev", "--getsize", meta_device])
+ if result.failed:
+ logger.Error("Failed to get device size: %s - %s" %
+ (result.fail_reason, result.output))
+ return False
try:
- fd.seek(0, 0)
- p1 = fd.tell()
- fd.write(empty_buf)
- p2 = fd.tell()
- logger.Debug("Zeroed %s from %d to %d" % (dev_path, p1, p2))
- fd.seek(-overwrite_size, 2)
- p1 = fd.tell()
- fd.write(empty_buf)
- p2 = fd.tell()
- logger.Debug("Zeroed %s from %d to %d" % (dev_path, p1, p2))
- finally:
- fd.close()
+ sectors = int(result.stdout)
+ except ValueError:
+ logger.Error("Invalid output from blockdev: '%s'" % result.stdout)
+ return False
+ bytes = sectors * 512
+ if bytes < 128 * 1024 * 1024: # less than 128MiB
+ logger.Error("Meta device too small (%.2fMib)" % (bytes / 1024 / 1024))
+ return False
+ if bytes > (128 + 32) * 1024 * 1024: # account for an extra (big) PE on LVM
+ logger.Error("Meta device too big (%.2fMiB)" % (bytes / 1024 / 1024))
+ return False
+ return True
- @classmethod
- def Create(cls, unique_id, children, size):
- """Create a new MD raid1 array.
+ def Rename(self, new_id):
+ """Rename a device.
+
+ This is not supported for drbd devices.
"""
- if not isinstance(children, (tuple, list)):
- raise ValueError("Invalid setup data for MDRaid1 dev: %s" %
- str(children))
- for i in children:
- if not isinstance(i, BlockDev):
- raise ValueError("Invalid member in MDRaid1 dev: %s" % type(i))
- for i in children:
- try:
- cls._ZeroSuperblock(i.dev_path)
- except EnvironmentError, err:
- logger.Error("Can't zero superblock for %s: %s" %
- (i.dev_path, str(err)))
- return None
- minor = cls._FindUnusedMinor()
- result = utils.RunCmd(["mdadm", "--create", "/dev/md%d" % minor,
- "--auto=yes", "--force", "-l1",
- "-n%d" % len(children)] +
- [dev.dev_path for dev in children])
+ raise errors.ProgrammerError("Can't rename a drbd device")
- if result.failed:
- logger.Error("Can't create md: %s: %s" % (result.fail_reason,
- result.output))
- return None
- info = cls._GetDevInfo(minor)
- if not info or not "uuid" in info:
- logger.Error("Wrong information returned from mdadm -D: %s" % str(info))
- return None
- return MDRaid1(info["uuid"], children)
+class DRBD8(BaseDRBD):
+ """DRBD v8.x block device.
- def Remove(self):
- """Stub remove function for MD RAID 1 arrays.
+ This implements the local host part of the DRBD device, i.e. it
+ doesn't do anything to the supposed peer. If you need a fully
+ connected DRBD pair, you need to use this class on both hosts.
- We don't remove the superblock right now. Mark a to do.
+ The unique_id for the drbd device is the (local_ip, local_port,
+ remote_ip, remote_port) tuple, and it must have two children: the
+ data device and the meta_device. The meta device is checked for
+ valid size and is zeroed on create.
- """
- #TODO: maybe zero superblock on child devices?
- return self.Shutdown()
+ """
+ _MAX_MINORS = 255
+ _PARSE_SHOW = None
+
+ def __init__(self, unique_id, children):
+ if children and children.count(None) > 0:
+ children = []
+ super(DRBD8, self).__init__(unique_id, children)
+ self.major = self._DRBD_MAJOR
+ version = self._GetVersion()
+ if version['k_major'] != 8 :
+ raise errors.BlockDeviceError("Mismatch in DRBD kernel version and"
+ " requested ganeti usage: kernel is"
+ " %s.%s, ganeti wants 8.x" %
+ (version['k_major'], version['k_minor']))
+
+ if len(children) not in (0, 2):
+ raise ValueError("Invalid configuration data %s" % str(children))
+ if not isinstance(unique_id, (tuple, list)) or len(unique_id) != 4:
+ raise ValueError("Invalid configuration data %s" % str(unique_id))
+ self._lhost, self._lport, self._rhost, self._rport = unique_id
+ self.Attach()
+ @classmethod
+ def _InitMeta(cls, minor, dev_path):
+ """Initialize a meta device.
- def AddChild(self, device):
- """Add a new member to the md raid1.
+ This will not work if the given minor is in use.
"""
- if self.minor is None and not self.Attach():
- raise errors.BlockDeviceError("Can't attach to device")
- if device.dev_path is None:
- raise errors.BlockDeviceError("New child is not initialised")
- result = utils.RunCmd(["mdadm", "-a", self.dev_path, device.dev_path])
- if result.failed:
- raise errors.BlockDeviceError("Failed to add new device to array: %s" %
- result.output)
- new_len = len(self._children) + 1
- result = utils.RunCmd(["mdadm", "--grow", self.dev_path, "-n", new_len])
+ result = utils.RunCmd(["drbdmeta", "--force", cls._DevPath(minor),
+ "v08", dev_path, "0", "create-md"])
if result.failed:
- raise errors.BlockDeviceError("Can't grow md array: %s" %
+ raise errors.BlockDeviceError("Can't initialize meta device: %s" %
result.output)
- self._children.append(device)
+ @classmethod
+ def _FindUnusedMinor(cls):
+ """Find an unused DRBD device.
- def RemoveChild(self, dev_path):
- """Remove member from the md raid1.
+ This is specific to 8.x as the minors are allocated dynamically,
+ so non-existing numbers up to a max minor count are actually free.
"""
- if self.minor is None and not self.Attach():
- raise errors.BlockDeviceError("Can't attach to device")
- if len(self._children) == 1:
- raise errors.BlockDeviceError("Can't reduce member when only one"
- " child left")
- for device in self._children:
- if device.dev_path == dev_path:
- break
- else:
- raise errors.BlockDeviceError("Can't find child with this path")
- new_len = len(self._children) - 1
- result = utils.RunCmd(["mdadm", "-f", self.dev_path, dev_path])
- if result.failed:
- raise errors.BlockDeviceError("Failed to mark device as failed: %s" %
- result.output)
+ data = cls._GetProcData()
- # it seems here we need a short delay for MD to update its
- # superblocks
- time.sleep(0.5)
- result = utils.RunCmd(["mdadm", "-r", self.dev_path, dev_path])
- if result.failed:
- raise errors.BlockDeviceError("Failed to remove device from array:"
- " %s" % result.output)
- result = utils.RunCmd(["mdadm", "--grow", "--force", self.dev_path,
- "-n", new_len])
+ unused_line = re.compile("^ *([0-9]+): cs:Unconfigured$")
+ used_line = re.compile("^ *([0-9]+): cs:")
+ highest = None
+ for line in data:
+ match = unused_line.match(line)
+ if match:
+ return int(match.group(1))
+ match = used_line.match(line)
+ if match:
+ minor = int(match.group(1))
+ highest = max(highest, minor)
+ if highest is None: # there are no minors in use at all
+ return 0
+ if highest >= cls._MAX_MINORS:
+ logger.Error("Error: no free drbd minors!")
+ raise errors.BlockDeviceError("Can't find a free DRBD minor")
+ return highest + 1
+
+ @classmethod
+ def _IsValidMeta(cls, meta_device):
+ """Check if the given meta device looks like a valid one.
+
+ """
+ minor = cls._FindUnusedMinor()
+ minor_path = cls._DevPath(minor)
+ result = utils.RunCmd(["drbdmeta", minor_path,
+ "v08", meta_device, "0",
+ "dstate"])
if result.failed:
- raise errors.BlockDeviceError("Can't shrink md array: %s" %
- result.output)
- self._children.remove(device)
+ logger.Error("Invalid meta device %s: %s" % (meta_device, result.output))
+ return False
+ return True
+ @classmethod
+ def _GetShowParser(cls):
+ """Return a parser for `drbd show` output.
- def GetStatus(self):
- """Return the status of the device.
+ This will either create or return an already-create parser for the
+ output of the command `drbd show`.
"""
- self.Attach()
- if self.minor is None:
- retval = self.STATUS_UNKNOWN
- else:
- retval = self.STATUS_ONLINE
- return retval
+ if cls._PARSE_SHOW is not None:
+ return cls._PARSE_SHOW
+ # pyparsing setup
+ lbrace = pyp.Literal("{").suppress()
+ rbrace = pyp.Literal("}").suppress()
+ semi = pyp.Literal(";").suppress()
+ # this also converts the value to an int
+ number = pyp.Word(pyp.nums).setParseAction(lambda s, l, t: int(t[0]))
- def _SetFromMinor(self, minor):
- """Set our parameters based on the given minor.
+ comment = pyp.Literal ("#") + pyp.Optional(pyp.restOfLine)
+ defa = pyp.Literal("_is_default").suppress()
+ dbl_quote = pyp.Literal('"').suppress()
- This sets our minor variable and our dev_path.
+ keyword = pyp.Word(pyp.alphanums + '-')
- """
- self.minor = minor
- self.dev_path = "/dev/md%d" % minor
+ # value types
+ value = pyp.Word(pyp.alphanums + '_-/.:')
+ quoted = dbl_quote + pyp.CharsNotIn('"') + dbl_quote
+ addr_port = (pyp.Word(pyp.nums + '.') + pyp.Literal(':').suppress() +
+ number)
+ # meta device, extended syntax
+ meta_value = ((value ^ quoted) + pyp.Literal('[').suppress() +
+ number + pyp.Word(']').suppress())
+ # a statement
+ stmt = (~rbrace + keyword + ~lbrace +
+ pyp.Optional(addr_port ^ value ^ quoted ^ meta_value) +
+ pyp.Optional(defa) + semi +
+ pyp.Optional(pyp.restOfLine).suppress())
- def Assemble(self):
- """Assemble the MD device.
+ # an entire section
+ section_name = pyp.Word(pyp.alphas + '_')
+ section = section_name + lbrace + pyp.ZeroOrMore(pyp.Group(stmt)) + rbrace
+
+ bnf = pyp.ZeroOrMore(pyp.Group(section ^ stmt))
+ bnf.ignore(comment)
+
+ cls._PARSE_SHOW = bnf
+
+ return bnf
- At this point we should have:
- - list of children devices
- - uuid
+ @classmethod
+ def _GetShowData(cls, minor):
+ """Return the `drbdsetup show` data for a minor.
"""
- result = super(MDRaid1, self).Assemble()
- if not result:
- return result
- md_list = self._GetUsedDevs()
- for minor in md_list:
- info = self._GetDevInfo(minor)
- if info and info["uuid"] == self.unique_id:
- self._SetFromMinor(minor)
- logger.Info("MD array %s already started" % str(self))
- return True
- free_minor = self._FindUnusedMinor()
- result = utils.RunCmd(["mdadm", "-A", "--auto=yes", "--uuid",
- self.unique_id, "/dev/md%d" % free_minor] +
- [bdev.dev_path for bdev in self._children])
+ result = utils.RunCmd(["drbdsetup", cls._DevPath(minor), "show"])
if result.failed:
- logger.Error("Can't assemble MD array: %s: %s" %
+ logger.Error("Can't display the drbd config: %s - %s" %
(result.fail_reason, result.output))
- self.minor = None
- else:
- self.minor = free_minor
- return not result.failed
-
+ return None
+ return result.stdout
- def Shutdown(self):
- """Tear down the MD array.
+ @classmethod
+ def _GetDevInfo(cls, out):
+ """Parse details about a given DRBD minor.
- This does a 'mdadm --stop' so after this command, the array is no
- longer available.
+ This return, if available, the local backing device (as a path)
+ and the local and remote (ip, port) information from a string
+ containing the output of the `drbdsetup show` command as returned
+ by _GetShowData.
"""
- if self.minor is None and not self.Attach():
- logger.Info("MD object not attached to a device")
- return True
-
- result = utils.RunCmd(["mdadm", "--stop", "/dev/md%d" % self.minor])
- if result.failed:
- logger.Error("Can't stop MD array: %s" % result.fail_reason)
- return False
- self.minor = None
- self.dev_path = None
- return True
+ data = {}
+ if not out:
+ return data
+ bnf = cls._GetShowParser()
+ # run pyparse
- def SetSyncSpeed(self, kbytes):
- """Set the maximum sync speed for the MD array.
-
- """
- result = super(MDRaid1, self).SetSyncSpeed(kbytes)
- if self.minor is None:
- logger.Error("MD array not attached to a device")
- return False
- f = open("/sys/block/md%d/md/sync_speed_max" % self.minor, "w")
- try:
- f.write("%d" % kbytes)
- finally:
- f.close()
- f = open("/sys/block/md%d/md/sync_speed_min" % self.minor, "w")
try:
- f.write("%d" % (kbytes/2))
- finally:
- f.close()
- return result
-
-
- def GetSyncStatus(self):
- """Returns the sync status of the device.
-
- Returns:
- (sync_percent, estimated_time)
-
- If sync_percent is None, it means all is ok
- If estimated_time is None, it means we can't esimate
- the time needed, otherwise it's the time left in seconds
-
- """
- if self.minor is None and not self.Attach():
- raise errors.BlockDeviceError("Can't attach to device in GetSyncStatus")
- dev_info = self._GetDevInfo(self.minor)
- is_clean = ("state" in dev_info and
- len(dev_info["state"]) == 1 and
- dev_info["state"][0] in ("clean", "active"))
- sys_path = "/sys/block/md%s/md/" % self.minor
- f = file(sys_path + "sync_action")
- sync_status = f.readline().strip()
- f.close()
- if sync_status == "idle":
- return None, None, not is_clean
- f = file(sys_path + "sync_completed")
- sync_completed = f.readline().strip().split(" / ")
- f.close()
- if len(sync_completed) != 2:
- return 0, None, not is_clean
- sync_done, sync_total = [float(i) for i in sync_completed]
- sync_percent = 100.0*sync_done/sync_total
- f = file(sys_path + "sync_speed")
- sync_speed_k = int(f.readline().strip())
- if sync_speed_k == 0:
- time_est = None
- else:
- time_est = (sync_total - sync_done) / 2 / sync_speed_k
- return sync_percent, time_est, not is_clean
-
-
- def Open(self, force=False):
- """Make the device ready for I/O.
-
- This is a no-op for the MDRaid1 device type, although we could use
- the 2.6.18's new array_state thing.
-
- """
- return True
-
-
- def Close(self):
- """Notifies that the device will no longer be used for I/O.
-
- This is a no-op for the MDRaid1 device type, but see comment for
- `Open()`.
-
- """
- return True
-
-
-
-class DRBDev(BlockDev):
- """DRBD block device.
-
- This implements the local host part of the DRBD device, i.e. it
- doesn't do anything to the supposed peer. If you need a fully
- connected DRBD pair, you need to use this class on both hosts.
-
- The unique_id for the drbd device is the (local_ip, local_port,
- remote_ip, remote_port) tuple, and it must have two children: the
- data device and the meta_device. The meta device is checked for
- valid size and is zeroed on create.
-
- """
- _DRBD_MAJOR = 147
- _ST_UNCONFIGURED = "Unconfigured"
- _ST_WFCONNECTION = "WFConnection"
- _ST_CONNECTED = "Connected"
-
- def __init__(self, unique_id, children):
- super(DRBDev, self).__init__(unique_id, children)
- self.major = self._DRBD_MAJOR
- if len(children) != 2:
- raise ValueError("Invalid configuration data %s" % str(children))
- if not isinstance(unique_id, (tuple, list)) or len(unique_id) != 4:
- raise ValueError("Invalid configuration data %s" % str(unique_id))
- self._lhost, self._lport, self._rhost, self._rport = unique_id
- self.Attach()
-
- @staticmethod
- def _DevPath(minor):
- """Return the path to a drbd device for a given minor.
-
- """
- return "/dev/drbd%d" % minor
-
- @staticmethod
- def _GetProcData():
- """Return data from /proc/drbd.
-
- """
- stat = open("/proc/drbd", "r")
- data = stat.read().splitlines()
- stat.close()
+ results = bnf.parseString(out)
+ except pyp.ParseException, err:
+ raise errors.BlockDeviceError("Can't parse drbdsetup show output: %s" %
+ str(err))
+
+ # and massage the results into our desired format
+ for section in results:
+ sname = section[0]
+ if sname == "_this_host":
+ for lst in section[1:]:
+ if lst[0] == "disk":
+ data["local_dev"] = lst[1]
+ elif lst[0] == "meta-disk":
+ data["meta_dev"] = lst[1]
+ data["meta_index"] = lst[2]
+ elif lst[0] == "address":
+ data["local_addr"] = tuple(lst[1:])
+ elif sname == "_remote_host":
+ for lst in section[1:]:
+ if lst[0] == "address":
+ data["remote_addr"] = tuple(lst[1:])
return data
-
- @classmethod
- def _GetUsedDevs(cls):
- """Compute the list of used DRBD devices.
-
- """
- data = cls._GetProcData()
-
- used_devs = {}
- valid_line = re.compile("^ *([0-9]+): cs:([^ ]+).*$")
- for line in data:
- match = valid_line.match(line)
- if not match:
- continue
- minor = int(match.group(1))
- state = match.group(2)
- if state == cls._ST_UNCONFIGURED:
- continue
- used_devs[minor] = state, line
-
- return used_devs
-
-
- @classmethod
- def _FindUnusedMinor(cls):
- """Find an unused DRBD device.
-
- """
- data = cls._GetProcData()
-
- valid_line = re.compile("^ *([0-9]+): cs:Unconfigured$")
- for line in data:
- match = valid_line.match(line)
- if match:
- return int(match.group(1))
- logger.Error("Error: no free drbd minors!")
- return None
-
-
- @classmethod
- def _GetDevInfo(cls, minor):
- """Get details about a given DRBD minor.
-
- This return, if available, the local backing device in (major,
- minor) formant and the local and remote (ip, port) information.
-
- """
- data = {}
- result = utils.RunCmd(["drbdsetup", cls._DevPath(minor), "show"])
- if result.failed:
- logger.Error("Can't display the drbd config: %s" % result.fail_reason)
- return data
- out = result.stdout
- if out == "Not configured\n":
- return data
- for line in out.splitlines():
- if "local_dev" not in data:
- match = re.match("^Lower device: ([0-9]+):([0-9]+) .*$", line)
- if match:
- data["local_dev"] = (int(match.group(1)), int(match.group(2)))
- continue
- if "meta_dev" not in data:
- match = re.match("^Meta device: (([0-9]+):([0-9]+)|internal).*$", line)
- if match:
- if match.group(2) is not None and match.group(3) is not None:
- # matched on the major/minor
- data["meta_dev"] = (int(match.group(2)), int(match.group(3)))
- else:
- # matched on the "internal" string
- data["meta_dev"] = match.group(1)
- # in this case, no meta_index is in the output
- data["meta_index"] = -1
- continue
- if "meta_index" not in data:
- match = re.match("^Meta index: ([0-9]+).*$", line)
- if match:
- data["meta_index"] = int(match.group(1))
- continue
- if "local_addr" not in data:
- match = re.match("^Local address: ([0-9.]+):([0-9]+)$", line)
- if match:
- data["local_addr"] = (match.group(1), int(match.group(2)))
- continue
- if "remote_addr" not in data:
- match = re.match("^Remote address: ([0-9.]+):([0-9]+)$", line)
- if match:
- data["remote_addr"] = (match.group(1), int(match.group(2)))
- continue
- return data
-
-
def _MatchesLocal(self, info):
"""Test if our local config matches with an existing device.
device.
"""
- if not ("local_dev" in info and "meta_dev" in info and
- "meta_index" in info):
- return False
+ if self._children:
+ backend, meta = self._children
+ else:
+ backend = meta = None
- backend = self._children[0]
if backend is not None:
- retval = (info["local_dev"] == (backend.major, backend.minor))
+ retval = ("local_dev" in info and info["local_dev"] == backend.dev_path)
else:
- retval = (info["local_dev"] == (0, 0))
- meta = self._children[1]
+ retval = ("local_dev" not in info)
+
if meta is not None:
- retval = retval and (info["meta_dev"] == (meta.major, meta.minor))
- retval = retval and (info["meta_index"] == 0)
+ retval = retval and ("meta_dev" in info and
+ info["meta_dev"] == meta.dev_path)
+ retval = retval and ("meta_index" in info and
+ info["meta_index"] == 0)
else:
- retval = retval and (info["meta_dev"] == "internal" and
- info["meta_index"] == -1)
+ retval = retval and ("meta_dev" not in info and
+ "meta_index" not in info)
return retval
-
def _MatchesNet(self, info):
"""Test if our network config matches with an existing device.
info["remote_addr"] == (self._rhost, self._rport))
return retval
-
- @staticmethod
- def _IsValidMeta(meta_device):
- """Check if the given meta device looks like a valid one.
-
- This currently only check the size, which must be around
- 128MiB.
-
- """
- result = utils.RunCmd(["blockdev", "--getsize", meta_device])
- if result.failed:
- logger.Error("Failed to get device size: %s" % result.fail_reason)
- return False
- try:
- sectors = int(result.stdout)
- except ValueError:
- logger.Error("Invalid output from blockdev: '%s'" % result.stdout)
- return False
- bytes = sectors * 512
- if bytes < 128*1024*1024: # less than 128MiB
- logger.Error("Meta device too small (%.2fMib)" % (bytes/1024/1024))
- return False
- if bytes > (128+32)*1024*1024: # account for an extra (big) PE on LVM
- logger.Error("Meta device too big (%.2fMiB)" % (bytes/1024/1024))
- return False
- return True
-
-
@classmethod
def _AssembleLocal(cls, minor, backend, meta):
"""Configure the local part of a DRBD device.
"""
if not cls._IsValidMeta(meta):
return False
- result = utils.RunCmd(["drbdsetup", cls._DevPath(minor), "disk",
- backend, meta, "0", "-e", "detach"])
+ args = ["drbdsetup", cls._DevPath(minor), "disk",
+ backend, meta, "0", "-e", "detach", "--create-device"]
+ result = utils.RunCmd(args)
if result.failed:
logger.Error("Can't attach local disk: %s" % result.output)
return not result.failed
-
- @classmethod
- def _ShutdownLocal(cls, minor):
- """Detach from the local device.
-
- I/Os will continue to be served from the remote device. If we
- don't have a remote device, this operation will fail.
-
- """
- result = utils.RunCmd(["drbdsetup", cls._DevPath(minor), "detach"])
- if result.failed:
- logger.Error("Can't detach local device: %s" % result.output)
- return not result.failed
-
-
- @staticmethod
- def _ShutdownAll(minor):
- """Deactivate the device.
-
- This will, of course, fail if the device is in use.
-
- """
- result = utils.RunCmd(["drbdsetup", DRBDev._DevPath(minor), "down"])
- if result.failed:
- logger.Error("Can't shutdown drbd device: %s" % result.output)
- return not result.failed
-
-
@classmethod
- def _AssembleNet(cls, minor, net_info, protocol):
+ def _AssembleNet(cls, minor, net_info, protocol,
+ dual_pri=False, hmac=None, secret=None):
"""Configure the network part of the device.
- This operation can be, in theory, done multiple times, but there
- have been cases (in lab testing) in which the network part of the
- device had become stuck and couldn't be shut down because activity
- from the new peer (also stuck) triggered a timer re-init and
- needed remote peer interface shutdown in order to clear. So please
- don't change online the net config.
-
"""
lhost, lport, rhost, rport = net_info
- result = utils.RunCmd(["drbdsetup", cls._DevPath(minor), "net",
- "%s:%s" % (lhost, lport), "%s:%s" % (rhost, rport),
- protocol])
+ if None in net_info:
+ # we don't want network connection and actually want to make
+ # sure its shutdown
+ return cls._ShutdownNet(minor)
+
+ args = ["drbdsetup", cls._DevPath(minor), "net",
+ "%s:%s" % (lhost, lport), "%s:%s" % (rhost, rport), protocol,
+ "-A", "discard-zero-changes",
+ "-B", "consensus",
+ "--create-device",
+ ]
+ if dual_pri:
+ args.append("-m")
+ if hmac and secret:
+ args.extend(["-a", hmac, "-x", secret])
+ result = utils.RunCmd(args)
if result.failed:
- logger.Error("Can't setup network for dbrd device: %s" %
- result.fail_reason)
+ logger.Error("Can't setup network for dbrd device: %s - %s" %
+ (result.fail_reason, result.output))
return False
timeout = time.time() + 10
ok = False
while time.time() < timeout:
- info = cls._GetDevInfo(minor)
+ info = cls._GetDevInfo(cls._GetShowData(minor))
if not "local_addr" in info or not "remote_addr" in info:
time.sleep(1)
continue
return False
return True
+ def AddChildren(self, devices):
+ """Add a disk to the DRBD device.
- @classmethod
- def _ShutdownNet(cls, minor):
- """Disconnect from the remote peer.
+ """
+ if self.minor is None:
+ raise errors.BlockDeviceError("Can't attach to dbrd8 during AddChildren")
+ if len(devices) != 2:
+ raise errors.BlockDeviceError("Need two devices for AddChildren")
+ info = self._GetDevInfo(self._GetShowData(self.minor))
+ if "local_dev" in info:
+ raise errors.BlockDeviceError("DRBD8 already attached to a local disk")
+ backend, meta = devices
+ if backend.dev_path is None or meta.dev_path is None:
+ raise errors.BlockDeviceError("Children not ready during AddChildren")
+ backend.Open()
+ meta.Open()
+ if not self._CheckMetaSize(meta.dev_path):
+ raise errors.BlockDeviceError("Invalid meta device size")
+ self._InitMeta(self._FindUnusedMinor(), meta.dev_path)
+ if not self._IsValidMeta(meta.dev_path):
+ raise errors.BlockDeviceError("Cannot initalize meta device")
+
+ if not self._AssembleLocal(self.minor, backend.dev_path, meta.dev_path):
+ raise errors.BlockDeviceError("Can't attach to local storage")
+ self._children = devices
+
+ def RemoveChildren(self, devices):
+ """Detach the drbd device from local storage.
- This fails if we don't have a local device.
+ """
+ if self.minor is None:
+ raise errors.BlockDeviceError("Can't attach to drbd8 during"
+ " RemoveChildren")
+ # early return if we don't actually have backing storage
+ info = self._GetDevInfo(self._GetShowData(self.minor))
+ if "local_dev" not in info:
+ return
+ if len(self._children) != 2:
+ raise errors.BlockDeviceError("We don't have two children: %s" %
+ self._children)
+ if self._children.count(None) == 2: # we don't actually have children :)
+ logger.Error("Requested detach while detached")
+ return
+ if len(devices) != 2:
+ raise errors.BlockDeviceError("We need two children in RemoveChildren")
+ for child, dev in zip(self._children, devices):
+ if dev != child.dev_path:
+ raise errors.BlockDeviceError("Mismatch in local storage"
+ " (%s != %s) in RemoveChildren" %
+ (dev, child.dev_path))
+
+ if not self._ShutdownLocal(self.minor):
+ raise errors.BlockDeviceError("Can't detach from local storage")
+ self._children = []
+
+ def SetSyncSpeed(self, kbytes):
+ """Set the speed of the DRBD syncer.
"""
- result = utils.RunCmd(["drbdsetup", cls._DevPath(minor), "disconnect"])
- logger.Error("Can't shutdown network: %s" % result.output)
- return not result.failed
+ children_result = super(DRBD8, self).SetSyncSpeed(kbytes)
+ if self.minor is None:
+ logger.Info("Instance not attached to a device")
+ return False
+ result = utils.RunCmd(["drbdsetup", self.dev_path, "syncer", "-r", "%d" %
+ kbytes])
+ if result.failed:
+ logger.Error("Can't change syncer rate: %s - %s" %
+ (result.fail_reason, result.output))
+ return not result.failed and children_result
+ def GetProcStatus(self):
+ """Return device data from /proc.
- def _SetFromMinor(self, minor):
- """Set our parameters based on the given minor.
+ """
+ if self.minor is None:
+ raise errors.BlockDeviceError("GetStats() called while not attached")
+ proc_info = self._MassageProcData(self._GetProcData())
+ if self.minor not in proc_info:
+ raise errors.BlockDeviceError("Can't find myself in /proc (minor %d)" %
+ self.minor)
+ return DRBD8Status(proc_info[self.minor])
- This sets our minor variable and our dev_path.
+ def GetSyncStatus(self):
+ """Returns the sync status of the device.
+
+ Returns:
+ (sync_percent, estimated_time, is_degraded)
+
+ If sync_percent is None, it means all is ok
+ If estimated_time is None, it means we can't esimate
+ the time needed, otherwise it's the time left in seconds.
+
+
+ We set the is_degraded parameter to True on two conditions:
+ network not connected or local disk missing.
+
+ We compute the ldisk parameter based on wheter we have a local
+ disk or not.
"""
- if minor is None:
- self.minor = self.dev_path = None
+ if self.minor is None and not self.Attach():
+ raise errors.BlockDeviceError("Can't attach to device in GetSyncStatus")
+ stats = self.GetProcStatus()
+ ldisk = not stats.is_disk_uptodate
+ is_degraded = not stats.is_connected
+ return stats.sync_percent, stats.est_time, is_degraded or ldisk, ldisk
+
+ def Open(self, force=False):
+ """Make the local state primary.
+
+ If the 'force' parameter is given, the '-o' option is passed to
+ drbdsetup. Since this is a potentially dangerous operation, the
+ force flag should be only given after creation, when it actually
+ is mandatory.
+
+ """
+ if self.minor is None and not self.Attach():
+ logger.Error("DRBD cannot attach to a device during open")
+ return False
+ cmd = ["drbdsetup", self.dev_path, "primary"]
+ if force:
+ cmd.append("-o")
+ result = utils.RunCmd(cmd)
+ if result.failed:
+ msg = ("Can't make drbd device primary: %s" % result.output)
+ logger.Error(msg)
+ raise errors.BlockDeviceError(msg)
+
+ def Close(self):
+ """Make the local state secondary.
+
+ This will, of course, fail if the device is in use.
+
+ """
+ if self.minor is None and not self.Attach():
+ logger.Info("Instance not attached to a device")
+ raise errors.BlockDeviceError("Can't find device")
+ result = utils.RunCmd(["drbdsetup", self.dev_path, "secondary"])
+ if result.failed:
+ msg = ("Can't switch drbd device to"
+ " secondary: %s" % result.output)
+ logger.Error(msg)
+ raise errors.BlockDeviceError(msg)
+
+ def Attach(self):
+ """Find a DRBD device which matches our config and attach to it.
+
+ In case of partially attached (local device matches but no network
+ setup), we perform the network attach. If successful, we re-test
+ the attach if can return success.
+
+ """
+ for minor in self._GetUsedDevs():
+ info = self._GetDevInfo(self._GetShowData(minor))
+ match_l = self._MatchesLocal(info)
+ match_r = self._MatchesNet(info)
+ if match_l and match_r:
+ break
+ if match_l and not match_r and "local_addr" not in info:
+ res_r = self._AssembleNet(minor,
+ (self._lhost, self._lport,
+ self._rhost, self._rport),
+ "C")
+ if res_r:
+ if self._MatchesNet(self._GetDevInfo(self._GetShowData(minor))):
+ break
+ # the weakest case: we find something that is only net attached
+ # even though we were passed some children at init time
+ if match_r and "local_dev" not in info:
+ break
+
+ # this case must be considered only if we actually have local
+ # storage, i.e. not in diskless mode, because all diskless
+ # devices are equal from the point of view of local
+ # configuration
+ if (match_l and "local_dev" in info and
+ not match_r and "local_addr" in info):
+ # strange case - the device network part points to somewhere
+ # else, even though its local storage is ours; as we own the
+ # drbd space, we try to disconnect from the remote peer and
+ # reconnect to our correct one
+ if not self._ShutdownNet(minor):
+ raise errors.BlockDeviceError("Device has correct local storage,"
+ " wrong remote peer and is unable to"
+ " disconnect in order to attach to"
+ " the correct peer")
+ # note: _AssembleNet also handles the case when we don't want
+ # local storage (i.e. one or more of the _[lr](host|port) is
+ # None)
+ if (self._AssembleNet(minor, (self._lhost, self._lport,
+ self._rhost, self._rport), "C") and
+ self._MatchesNet(self._GetDevInfo(self._GetShowData(minor)))):
+ break
+
else:
- self.minor = minor
- self.dev_path = self._DevPath(minor)
+ minor = None
+ self._SetFromMinor(minor)
+ return minor is not None
def Assemble(self):
"""Assemble the drbd.
logger.Info("Already assembled")
return True
- result = super(DRBDev, self).Assemble()
+ result = super(DRBD8, self).Assemble()
if not result:
return result
minor = self._FindUnusedMinor()
- if minor is None:
- raise errors.BlockDeviceError("Not enough free minors for DRBD!")
need_localdev_teardown = False
- if self._children[0]:
+ if self._children and self._children[0] and self._children[1]:
result = self._AssembleLocal(minor, self._children[0].dev_path,
self._children[1].dev_path)
if not result:
self._SetFromMinor(minor)
return True
+ @classmethod
+ def _ShutdownLocal(cls, minor):
+ """Detach from the local device.
+
+ I/Os will continue to be served from the remote device. If we
+ don't have a remote device, this operation will fail.
+
+ """
+ result = utils.RunCmd(["drbdsetup", cls._DevPath(minor), "detach"])
+ if result.failed:
+ logger.Error("Can't detach local device: %s" % result.output)
+ return not result.failed
+
+ @classmethod
+ def _ShutdownNet(cls, minor):
+ """Disconnect from the remote peer.
+
+ This fails if we don't have a local device.
+
+ """
+ result = utils.RunCmd(["drbdsetup", cls._DevPath(minor), "disconnect"])
+ if result.failed:
+ logger.Error("Can't shutdown network: %s" % result.output)
+ return not result.failed
+
+ @classmethod
+ def _ShutdownAll(cls, minor):
+ """Deactivate the device.
+
+ This will, of course, fail if the device is in use.
+
+ """
+ result = utils.RunCmd(["drbdsetup", cls._DevPath(minor), "down"])
+ if result.failed:
+ logger.Error("Can't shutdown drbd device: %s" % result.output)
+ return not result.failed
def Shutdown(self):
"""Shutdown the DRBD device.
self.dev_path = None
return True
-
- def Attach(self):
- """Find a DRBD device which matches our config and attach to it.
-
- In case of partially attached (local device matches but no network
- setup), we perform the network attach. If successful, we re-test
- the attach if can return success.
+ def Remove(self):
+ """Stub remove for DRBD devices.
"""
- for minor in self._GetUsedDevs():
- info = self._GetDevInfo(minor)
- match_l = self._MatchesLocal(info)
- match_r = self._MatchesNet(info)
- if match_l and match_r:
- break
- if match_l and not match_r and "local_addr" not in info:
- res_r = self._AssembleNet(minor,
- (self._lhost, self._lport,
- self._rhost, self._rport),
- "C")
- if res_r and self._MatchesNet(self._GetDevInfo(minor)):
- break
- else:
- minor = None
+ return self.Shutdown()
- self._SetFromMinor(minor)
- return minor is not None
+ @classmethod
+ def Create(cls, unique_id, children, size):
+ """Create a new DRBD8 device.
+ Since DRBD devices are not created per se, just assembled, this
+ function only initializes the metadata.
- def Open(self, force=False):
- """Make the local state primary.
+ """
+ if len(children) != 2:
+ raise errors.ProgrammerError("Invalid setup for the drbd device")
+ meta = children[1]
+ meta.Assemble()
+ if not meta.Attach():
+ raise errors.BlockDeviceError("Can't attach to meta device")
+ if not cls._CheckMetaSize(meta.dev_path):
+ raise errors.BlockDeviceError("Invalid meta device size")
+ cls._InitMeta(cls._FindUnusedMinor(), meta.dev_path)
+ if not cls._IsValidMeta(meta.dev_path):
+ raise errors.BlockDeviceError("Cannot initalize meta device")
+ return cls(unique_id, children)
- If the 'force' parameter is given, the '--do-what-I-say' parameter
- is given. Since this is a pottentialy dangerous operation, the
- force flag should be only given after creation, when it actually
- has to be given.
+ def Grow(self, amount):
+ """Resize the DRBD device and its backing storage.
"""
- if self.minor is None and not self.Attach():
- logger.Error("DRBD cannot attach to a device during open")
- return False
- cmd = ["drbdsetup", self.dev_path, "primary"]
- if force:
- cmd.append("--do-what-I-say")
- result = utils.RunCmd(cmd)
+ if self.minor is None:
+ raise errors.ProgrammerError("drbd8: Grow called while not attached")
+ if len(self._children) != 2 or None in self._children:
+ raise errors.BlockDeviceError("Cannot grow diskless DRBD8 device")
+ self._children[0].Grow(amount)
+ result = utils.RunCmd(["drbdsetup", self.dev_path, "resize"])
if result.failed:
- logger.Error("Can't make drbd device primary: %s" % result.output)
- return False
- return True
-
+ raise errors.BlockDeviceError("resize failed for %s: %s" %
+ (self.dev_path, result.output))
+ return
- def Close(self):
- """Make the local state secondary.
- This will, of course, fail if the device is in use.
+class FileStorage(BlockDev):
+ """File device.
- """
- if self.minor is None and not self.Attach():
- logger.Info("Instance not attached to a device")
- raise errors.BlockDeviceError("Can't find device")
- result = utils.RunCmd(["drbdsetup", self.dev_path, "secondary"])
- if result.failed:
- logger.Error("Can't switch drbd device to secondary: %s" % result.output)
- raise errors.BlockDeviceError("Can't switch drbd device to secondary")
+ This class represents the a file storage backend device.
+ The unique_id for the file device is a (file_driver, file_path) tuple.
- def SetSyncSpeed(self, kbytes):
- """Set the speed of the DRBD syncer.
+ """
+ def __init__(self, unique_id, children):
+ """Initalizes a file device backend.
"""
- children_result = super(DRBDev, self).SetSyncSpeed(kbytes)
- if self.minor is None:
- logger.Info("Instance not attached to a device")
- return False
- result = utils.RunCmd(["drbdsetup", self.dev_path, "syncer", "-r", "%d" %
- kbytes])
- if result.failed:
- logger.Error("Can't change syncer rate: %s " % result.fail_reason)
- return not result.failed and children_result
-
-
- def GetSyncStatus(self):
- """Returns the sync status of the device.
+ if children:
+ raise errors.BlockDeviceError("Invalid setup for file device")
+ super(FileStorage, self).__init__(unique_id, children)
+ if not isinstance(unique_id, (tuple, list)) or len(unique_id) != 2:
+ raise ValueError("Invalid configuration data %s" % str(unique_id))
+ self.driver = unique_id[0]
+ self.dev_path = unique_id[1]
- Returns:
- (sync_percent, estimated_time)
+ def Assemble(self):
+ """Assemble the device.
- If sync_percent is None, it means all is ok
- If estimated_time is None, it means we can't esimate
- the time needed, otherwise it's the time left in seconds
+ Checks whether the file device exists, raises BlockDeviceError otherwise.
"""
- if self.minor is None and not self.Attach():
- raise errors.BlockDeviceError("Can't attach to device in GetSyncStatus")
- proc_info = self._MassageProcData(self._GetProcData())
- if self.minor not in proc_info:
- raise errors.BlockDeviceError("Can't find myself in /proc (minor %d)" %
- self.minor)
- line = proc_info[self.minor]
- match = re.match("^.*sync'ed: *([0-9.]+)%.*"
- " finish: ([0-9]+):([0-9]+):([0-9]+) .*$", line)
- if match:
- sync_percent = float(match.group(1))
- hours = int(match.group(2))
- minutes = int(match.group(3))
- seconds = int(match.group(4))
- est_time = hours * 3600 + minutes * 60 + seconds
- else:
- sync_percent = None
- est_time = None
- match = re.match("^ *[0-9]+: cs:([^ ]+).*$", line)
- if not match:
- raise errors.BlockDeviceError("Can't find my data in /proc (minor %d)" %
- self.minor)
- client_state = match.group(1)
- is_degraded = client_state != "Connected"
- return sync_percent, est_time, is_degraded
-
+ if not os.path.exists(self.dev_path):
+ raise errors.BlockDeviceError("File device '%s' does not exist." %
+ self.dev_path)
+ return True
- @staticmethod
- def _MassageProcData(data):
- """Transform the output of _GetProdData into a nicer form.
+ def Shutdown(self):
+ """Shutdown the device.
- Returns:
- a dictionary of minor: joined lines from /proc/drbd for that minor
+ This is a no-op for the file type, as we don't deacivate
+ the file on shutdown.
"""
- lmatch = re.compile("^ *([0-9]+):.*$")
- results = {}
- old_minor = old_line = None
- for line in data:
- lresult = lmatch.match(line)
- if lresult is not None:
- if old_minor is not None:
- results[old_minor] = old_line
- old_minor = int(lresult.group(1))
- old_line = line
- else:
- if old_minor is not None:
- old_line += " " + line.strip()
- # add last line
- if old_minor is not None:
- results[old_minor] = old_line
- return results
-
+ return True
- def GetStatus(self):
- """Compute the status of the DRBD device
+ def Open(self, force=False):
+ """Make the device ready for I/O.
- Note that DRBD devices don't have the STATUS_EXISTING state.
+ This is a no-op for the file type.
"""
- if self.minor is None and not self.Attach():
- return self.STATUS_UNKNOWN
+ pass
- data = self._GetProcData()
- match = re.compile("^ *%d: cs:[^ ]+ st:(Primary|Secondary)/.*$" %
- self.minor)
- for line in data:
- mresult = match.match(line)
- if mresult:
- break
- else:
- logger.Error("Can't find myself!")
- return self.STATUS_UNKNOWN
-
- state = mresult.group(2)
- if state == "Primary":
- result = self.STATUS_ONLINE
- else:
- result = self.STATUS_STANDBY
+ def Close(self):
+ """Notifies that the device will no longer be used for I/O.
- return result
+ This is a no-op for the file type.
+ """
+ pass
- @staticmethod
- def _ZeroDevice(device):
- """Zero a device.
+ def Remove(self):
+ """Remove the file backing the block device.
- This writes until we get ENOSPC.
+ Returns:
+ boolean indicating wheter removal of file was successful or not.
"""
- f = open(device, "w")
- buf = "\0" * 1048576
+ if not os.path.exists(self.dev_path):
+ return True
try:
- while True:
- f.write(buf)
- except IOError, err:
- if err.errno != errno.ENOSPC:
- raise
+ os.remove(self.dev_path)
+ return True
+ except OSError, err:
+ logger.Error("Can't remove file '%s': %s"
+ % (self.dev_path, err))
+ return False
+ def Attach(self):
+ """Attach to an existing file.
- @classmethod
- def Create(cls, unique_id, children, size):
- """Create a new DRBD device.
+ Check if this file already exists.
- Since DRBD devices are not created per se, just assembled, this
- function just zeroes the meta device.
+ Returns:
+ boolean indicating if file exists or not.
"""
- if len(children) != 2:
- raise errors.ProgrammerError("Invalid setup for the drbd device")
- meta = children[1]
- meta.Assemble()
- if not meta.Attach():
- raise errors.BlockDeviceError("Can't attach to meta device")
- if not cls._IsValidMeta(meta.dev_path):
- raise errors.BlockDeviceError("Invalid meta device")
- logger.Info("Started zeroing device %s" % meta.dev_path)
- cls._ZeroDevice(meta.dev_path)
- logger.Info("Done zeroing device %s" % meta.dev_path)
- return cls(unique_id, children)
+ if os.path.exists(self.dev_path):
+ return True
+ return False
+
+ @classmethod
+ def Create(cls, unique_id, children, size):
+ """Create a new file.
+ Args:
+ children:
+ size: integer size of file in MiB
- def Remove(self):
- """Stub remove for DRBD devices.
+ Returns:
+ A ganeti.bdev.FileStorage object.
"""
- return self.Shutdown()
+ if not isinstance(unique_id, (tuple, list)) or len(unique_id) != 2:
+ raise ValueError("Invalid configuration data %s" % str(unique_id))
+ dev_path = unique_id[1]
+ try:
+ f = open(dev_path, 'w')
+ except IOError, err:
+ raise errors.BlockDeviceError("Could not create '%'" % err)
+ else:
+ f.truncate(size * 1024 * 1024)
+ f.close()
+
+ return FileStorage(unique_id, children)
DEV_MAP = {
- "lvm": LogicalVolume,
- "md_raid1": MDRaid1,
- "drbd": DRBDev,
+ constants.LD_LV: LogicalVolume,
+ constants.LD_DRBD8: DRBD8,
+ constants.LD_FILE: FileStorage,
}
device = DEV_MAP[dev_type](unique_id, children)
if not device.Attach():
device.Assemble()
- if not device.Attach():
- raise errors.BlockDeviceError("Can't find a valid block device for"
- " %s/%s/%s" %
- (dev_type, unique_id, children))
+ if not device.Attach():
+ raise errors.BlockDeviceError("Can't find a valid block device for"
+ " %s/%s/%s" %
+ (dev_type, unique_id, children))
return device