====
-Version 2.6.0 beta1
+Version 2.7.0 beta1
-------------------
*(unreleased)*
-- Deprecated ``admin_up`` field. Instead, ``admin_state`` is introduced,
- with 3 possible values -- ``up``, ``down`` and ``offline``.
+- ``gnt-instance batch-create`` has been changed to use the bulk create
+ opcode from Ganeti. This lead to incompatible changes in the format of
+ the JSON file. It's now not a custom dict anymore but a dict
+ compatible with the ``OpInstanceCreate`` opcode.
+- Parent directories for file storage need to be listed in
+ ``$sysconfdir/ganeti/file-storage-paths`` now. ``cfgupgrade`` will
+ write the file automatically based on old configuration values, but it
+ can not distribute it across all nodes and the file contents should be
+ verified. Use ``gnt-cluster copyfile
+ $sysconfdir/ganeti/file-storage-paths`` once the cluster has been
+ upgraded. The reason for requiring this list of paths now is that
+ before it would have been possible to inject new paths via RPC,
+ allowing files to be created in arbitrary locations. The RPC protocol
+ is protected using SSL/X.509 certificates, but as a design principle
+ Ganeti does not permit arbitrary paths to be passed.
+- The parsing of the variants file for OSes (see
+ :manpage:`ganeti-os-interface(7)`) has been slightly changed: now empty
+ lines and comment lines (starting with ``#``) are ignored for better
+ readability.
+- The ``setup-ssh`` tool added in Ganeti 2.2 has been replaced and is no
+ longer available. ``gnt-node add`` now invokes a new tool on the
+ destination node, named ``prepare-node-join``, to configure the SSH
+ daemon. Paramiko is no longer necessary to configure nodes' SSH
+ daemons via ``gnt-node add``.
+- A new user option, :pyeval:`rapi.RAPI_ACCESS_READ`, has been added
+ for RAPI users. It allows granting permissions to query for
+ information to a specific user without giving
+ :pyeval:`rapi.RAPI_ACCESS_WRITE` permissions.
+- A new tool named ``node-cleanup`` has been added. It cleans remains of
+ a cluster from a machine by stopping all daemons, removing
+ certificates and ssconf files. Unless the ``--no-backup`` option is
+ given, copies of the certificates are made.
+- Draining (``gnt-cluster queue drain``) and un-draining the job queue
+ (``gnt-cluster queue undrain``) now affects all nodes in a cluster and
+ the flag is not reset after a master failover.
+- Instance creations now support the use of opportunistic locking,
+ potentially speeding up the (parallel) creation of multiple instances.
+ This feature is currently only available via the :doc:`RAPI
+ <rapi>` interface and when an instance allocator is used. If the
+ ``opportunistic_locking`` parameter is set the opcode will try to
+ acquire as many locks as possible, but will not wait for any locks
+ held by other opcodes. If the not enough resources can be found to
+ allocate the instance, the temporary error code
+ :pyeval:`errors.ECODE_TEMP_NORES` is returned. The operation can be
+ retried thereafter, with or without opportunistic locking.
+- Man pages can now be included when the documentation is built, in
+ which case the output is in ``doc/man-html``. The configure-time
+ option is ``--enable-manpages-in-doc``. Sphinx 1.0 or higher is
+ required.
+
+
+Version 2.6.2
+-------------
+*(Released Fri, 21 Dec 2012)*
+
+Important behaviour change: hbal won't rebalance anymore instances which
+have the ``auto_balance`` attribute set to false. This was the intention
+all along, but until now it only skipped those from the N+1 memory
+reservation (DRBD-specific).
+
+A significant number of bug fixes in this release:
+
+- Fixed disk adoption interaction with ipolicy checks.
+- Fixed networking issues when instances are started, stopped or
+ migrated, by forcing the tap device's MAC prefix to "fe" (issue 217).
+- Fixed the warning in cluster verify for shared storage instances not
+ being redundant.
+- Fixed removal of storage directory on shared file storage (issue 262).
+- Fixed validation of LVM volume group name in OpClusterSetParams
+ (``gnt-cluster modify``) (issue 285).
+- Fixed runtime memory increases (``gnt-instance modify -m``).
+- Fixed live migration under Xen's ``xl`` mode.
+- Fixed ``gnt-instance console`` with ``xl``.
+- Fixed building with newer Haskell compiler/libraries.
+- Fixed PID file writing in Haskell daemons (confd); this prevents
+ restart issues if confd was launched manually (outside of
+ ``daemon-util``) while another copy of it was running
+- Fixed a type error when doing live migrations with KVM (issue 297) and
+ the error messages for failing migrations have been improved.
+- Fixed opcode validation for the out-of-band commands (``gnt-node
+ power``).
+- Fixed a type error when unsetting OS hypervisor parameters (issue
+ 311); now it's possible to unset all OS-specific hypervisor
+ parameters.
+- Fixed the ``dry-run`` mode for many operations: verification of
+ results was over-zealous but didn't take into account the ``dry-run``
+ operation, resulting in "wrong" failures.
+- Fixed bash completion in ``gnt-job list`` when the job queue has
+ hundreds of entries; especially with older ``bash`` versions, this
+ results in significant CPU usage.
+
+And lastly, a few other improvements have been made:
+
+- Added option to force master-failover without voting (issue 282).
+- Clarified error message on lock conflict (issue 287).
+- Logging of newly submitted jobs has been improved (issue 290).
+- Hostname checks have been made uniform between instance rename and
+ create (issue 291).
+- The ``--submit`` option is now supported by ``gnt-debug delay``.
+- Shutting down the master daemon by sending SIGTERM now stops it from
+ processing jobs waiting for locks; instead, those jobs will be started
+ once again after the master daemon is started the next time (issue
+ 296).
+- Support for Xen's ``xl`` program has been improved (besides the fixes
+ above).
+- Reduced logging noise in the Haskell confd daemon (only show one log
+ entry for each config reload, instead of two).
+- Several man page updates and typo fixes.
+
+
+Version 2.6.1
+-------------
-Version 2.5.0 rc5
+*(Released Fri, 12 Oct 2012)*
+
+A small bugfix release. Among the bugs fixed:
+
+- Fixed double use of ``PRIORITY_OPT`` in ``gnt-node migrate``, that
+ made the command unusable.
+- Commands that issue many jobs don't fail anymore just because some jobs
+ take so long that other jobs are archived.
+- Failures during ``gnt-instance reinstall`` are reflected by the exit
+ status.
+- Issue 190 fixed. Check for DRBD in cluster verify is enabled only when
+ DRBD is enabled.
+- When ``always_failover`` is set, ``--allow-failover`` is not required
+ in migrate commands anymore.
+- ``bash_completion`` works even if extglob is disabled.
+- Fixed bug with locks that made failover for RDB-based instances fail.
+- Fixed bug in non-mirrored instance allocation that made Ganeti choose
+ a random node instead of one based on the allocator metric.
+- Support for newer versions of pylint and pep8.
+- Hail doesn't fail anymore when trying to add an instance of type
+ ``file``, ``sharedfile`` or ``rbd``.
+- Added new Makefile target to rebuild the whole distribution, so that
+ all files are included.
+
+
+Version 2.6.0
+-------------
+
+*(Released Fri, 27 Jul 2012)*
+
+
+.. attention:: The ``LUXI`` protocol has been made more consistent
+ regarding its handling of command arguments. This, however, leads to
+ incompatibility issues with previous versions. Please ensure that you
+ restart Ganeti daemons soon after the upgrade, otherwise most
+ ``LUXI`` calls (job submission, setting/resetting the drain flag,
+ pausing/resuming the watcher, cancelling and archiving jobs, querying
+ the cluster configuration) will fail.
+
+
+New features
+~~~~~~~~~~~~
+
+Instance run status
++++++++++++++++++++
+
+The current ``admin_up`` field, which used to denote whether an instance
+should be running or not, has been removed. Instead, ``admin_state`` is
+introduced, with 3 possible values -- ``up``, ``down`` and ``offline``.
+
+The rational behind this is that an instance being “down” can have
+different meanings:
+
+- it could be down during a reboot
+- it could be temporarily be down for a reinstall
+- or it could be down because it is deprecated and kept just for its
+ disk
+
+The previous Boolean state was making it difficult to do capacity
+calculations: should Ganeti reserve memory for a down instance? Now, the
+tri-state field makes it clear:
+
+- in ``up`` and ``down`` state, all resources are reserved for the
+ instance, and it can be at any time brought up if it is down
+- in ``offline`` state, only disk space is reserved for it, but not
+ memory or CPUs
+
+The field can have an extra use: since the transition between ``up`` and
+``down`` and vice-versus is done via ``gnt-instance start/stop``, but
+transition between ``offline`` and ``down`` is done via ``gnt-instance
+modify``, it is possible to given different rights to users. For
+example, owners of an instance could be allowed to start/stop it, but
+not transition it out of the offline state.
+
+Instance policies and specs
++++++++++++++++++++++++++++
+
+In previous Ganeti versions, an instance creation request was not
+limited on the minimum size and on the maximum size just by the cluster
+resources. As such, any policy could be implemented only in third-party
+clients (RAPI clients, or shell wrappers over ``gnt-*``
+tools). Furthermore, calculating cluster capacity via ``hspace`` again
+required external input with regards to instance sizes.
+
+In order to improve these workflows and to allow for example better
+per-node group differentiation, we introduced instance specs, which
+allow declaring:
+
+- minimum instance disk size, disk count, memory size, cpu count
+- maximum values for the above metrics
+- and “standard” values (used in ``hspace`` to calculate the standard
+ sized instances)
+
+The minimum/maximum values can be also customised at node-group level,
+for example allowing more powerful hardware to support bigger instance
+memory sizes.
+
+Beside the instance specs, there are a few other settings belonging to
+the instance policy framework. It is possible now to customise, per
+cluster and node-group:
+
+- the list of allowed disk templates
+- the maximum ratio of VCPUs per PCPUs (to control CPU oversubscription)
+- the maximum ratio of instance to spindles (see below for more
+ information) for local storage
+
+All these together should allow all tools that talk to Ganeti to know
+what are the ranges of allowed values for instances and the
+over-subscription that is allowed.
+
+For the VCPU/PCPU ratio, we already have the VCPU configuration from the
+instance configuration, and the physical CPU configuration from the
+node. For the spindle ratios however, we didn't track before these
+values, so new parameters have been added:
+
+- a new node parameter ``spindle_count``, defaults to 1, customisable at
+ node group or node level
+- at new backend parameter (for instances), ``spindle_use`` defaults to 1
+
+Note that spindles in this context doesn't need to mean actual
+mechanical hard-drives; it's just a relative number for both the node
+I/O capacity and instance I/O consumption.
+
+Instance migration behaviour
+++++++++++++++++++++++++++++
+
+While live-migration is in general desirable over failover, it is
+possible that for some workloads it is actually worse, due to the
+variable time of the “suspend” phase during live migration.
+
+To allow the tools to work consistently over such instances (without
+having to hard-code instance names), a new backend parameter
+``always_failover`` has been added to control the migration/failover
+behaviour. When set to True, all migration requests for an instance will
+instead fall-back to failover.
+
+Instance memory ballooning
+++++++++++++++++++++++++++
+
+Initial support for memory ballooning has been added. The memory for an
+instance is no longer fixed (backend parameter ``memory``), but instead
+can vary between minimum and maximum values (backend parameters
+``minmem`` and ``maxmem``). Currently we only change an instance's
+memory when:
+
+- live migrating or failing over and instance and the target node
+ doesn't have enough memory
+- user requests changing the memory via ``gnt-instance modify
+ --runtime-memory``
+
+Instance CPU pinning
+++++++++++++++++++++
+
+In order to control the use of specific CPUs by instance, support for
+controlling CPU pinning has been added for the Xen, HVM and LXC
+hypervisors. This is controlled by a new hypervisor parameter
+``cpu_mask``; details about possible values for this are in the
+:manpage:`gnt-instance(8)`. Note that use of the most specific (precise
+VCPU-to-CPU mapping) form will work well only when all nodes in your
+cluster have the same amount of CPUs.
+
+Disk parameters
++++++++++++++++
+
+Another area in which Ganeti was not customisable were the parameters
+used for storage configuration, e.g. how many stripes to use for LVM,
+DRBD resync configuration, etc.
+
+To improve this area, we've added disks parameters, which are
+customisable at cluster and node group level, and which allow to
+specify various parameters for disks (DRBD has the most parameters
+currently), for example:
+
+- DRBD resync algorithm and parameters (e.g. speed)
+- the default VG for meta-data volumes for DRBD
+- number of stripes for LVM (plain disk template)
+- the RBD pool
+
+These parameters can be modified via ``gnt-cluster modify -D …`` and
+``gnt-group modify -D …``, and are used at either instance creation (in
+case of LVM stripes, for example) or at disk “activation” time
+(e.g. resync speed).
+
+Rados block device support
+++++++++++++++++++++++++++
+
+A Rados (http://ceph.com/wiki/Rbd) storage backend has been added,
+denoted by the ``rbd`` disk template type. This is considered
+experimental, feedback is welcome. For details on configuring it, see
+the :doc:`install` document and the :manpage:`gnt-cluster(8)` man page.
+
+Master IP setup
++++++++++++++++
+
+The existing master IP functionality works well only in simple setups (a
+single network shared by all nodes); however, if nodes belong to
+different networks, then the ``/32`` setup and lack of routing
+information is not enough.
+
+To allow the master IP to function well in more complex cases, the
+system was reworked as follows:
+
+- a master IP netmask setting has been added
+- the master IP activation/turn-down code was moved from the node daemon
+ to a separate script
+- whether to run the Ganeti-supplied master IP script or a user-supplied
+ on is a ``gnt-cluster init`` setting
+
+Details about the location of the standard and custom setup scripts are
+in the man page :manpage:`gnt-cluster(8)`; for information about the
+setup script protocol, look at the Ganeti-supplied script.
+
+SPICE support
++++++++++++++
+
+The `SPICE <http://www.linux-kvm.org/page/SPICE>`_ support has been
+improved.
+
+It is now possible to use TLS-protected connections, and when renewing
+or changing the cluster certificates (via ``gnt-cluster renew-crypto``,
+it is now possible to specify spice or spice CA certificates. Also, it
+is possible to configure a password for SPICE sessions via the
+hypervisor parameter ``spice_password_file``.
+
+There are also new parameters to control the compression and streaming
+options (e.g. ``spice_image_compression``, ``spice_streaming_video``,
+etc.). For details, see the man page :manpage:`gnt-instance(8)` and look
+for the spice parameters.
+
+Lastly, it is now possible to see the SPICE connection information via
+``gnt-instance console``.
+
+OVF converter
++++++++++++++
+
+A new tool (``tools/ovfconverter``) has been added that supports
+conversion between Ganeti and the `Open Virtualization Format
+<http://en.wikipedia.org/wiki/Open_Virtualization_Format>`_ (both to and
+from).
+
+This relies on the ``qemu-img`` tool to convert the disk formats, so the
+actual compatibility with other virtualization solutions depends on it.
+
+Confd daemon changes
+++++++++++++++++++++
+
+The configuration query daemon (``ganeti-confd``) is now optional, and
+has been rewritten in Haskell; whether to use the daemon at all, use the
+Python (default) or the Haskell version is selectable at configure time
+via the ``--enable-confd`` parameter, which can take one of the
+``haskell``, ``python`` or ``no`` values. If not used, disabling the
+daemon will result in a smaller footprint; for larger systems, we
+welcome feedback on the Haskell version which might become the default
+in future versions.
+
+If you want to use ``gnt-node list-drbd`` you need to have the Haskell
+daemon running. The Python version doesn't implement the new call.
+
+
+User interface changes
+~~~~~~~~~~~~~~~~~~~~~~
+
+We have replaced the ``--disks`` option of ``gnt-instance
+replace-disks`` with a more flexible ``--disk`` option, which allows
+adding and removing disks at arbitrary indices (Issue 188). Furthermore,
+disk size and mode can be changed upon recreation (via ``gnt-instance
+recreate-disks``, which accepts the same ``--disk`` option).
+
+As many people are used to a ``show`` command, we have added that as an
+alias to ``info`` on all ``gnt-*`` commands.
+
+The ``gnt-instance grow-disk`` command has a new mode in which it can
+accept the target size of the disk, instead of the delta; this can be
+more safe since two runs in absolute mode will be idempotent, and
+sometimes it's also easier to specify the desired size directly.
+
+Also the handling of instances with regard to offline secondaries has
+been improved. Instance operations should not fail because one of it's
+secondary nodes is offline, even though it's safe to proceed.
+
+A new command ``list-drbd`` has been added to the ``gnt-node`` script to
+support debugging of DRBD issues on nodes. It provides a mapping of DRBD
+minors to instance name.
+
+API changes
+~~~~~~~~~~~
+
+RAPI coverage has improved, with (for example) new resources for
+recreate-disks, node power-cycle, etc.
+
+Compatibility
+~~~~~~~~~~~~~
+
+There is partial support for ``xl`` in the Xen hypervisor; feedback is
+welcome.
+
+Python 2.7 is better supported, and after Ganeti 2.6 we will investigate
+whether to still support Python 2.4 or move to Python 2.6 as minimum
+required version.
+
+Support for Fedora has been slightly improved; the provided example
+init.d script should work better on it and the INSTALL file should
+document the needed dependencies.
+
+Internal changes
+~~~~~~~~~~~~~~~~
+
+The deprecated ``QueryLocks`` LUXI request has been removed. Use
+``Query(what=QR_LOCK, ...)`` instead.
+
+The LUXI requests :pyeval:`luxi.REQ_QUERY_JOBS`,
+:pyeval:`luxi.REQ_QUERY_INSTANCES`, :pyeval:`luxi.REQ_QUERY_NODES`,
+:pyeval:`luxi.REQ_QUERY_GROUPS`, :pyeval:`luxi.REQ_QUERY_EXPORTS` and
+:pyeval:`luxi.REQ_QUERY_TAGS` are deprecated and will be removed in a
+future version. :pyeval:`luxi.REQ_QUERY` should be used instead.
+
+RAPI client: ``CertificateError`` now derives from
+``GanetiApiError``. This should make it more easy to handle Ganeti
+errors.
+
+Deprecation warnings due to PyCrypto/paramiko import in
+``tools/setup-ssh`` have been silenced, as usually they are safe; please
+make sure to run an up-to-date paramiko version, if you use this tool.
+
+The QA scripts now depend on Python 2.5 or above (the main code base
+still works with Python 2.4).
+
+The configuration file (``config.data``) is now written without
+indentation for performance reasons; if you want to edit it, it can be
+re-formatted via ``tools/fmtjson``.
+
+A number of bugs has been fixed in the cluster merge tool.
+
+``x509`` certification verification (used in import-export) has been
+changed to allow the same clock skew as permitted by the cluster
+verification. This will remove some rare but hard to diagnose errors in
+import-export.
+
+
+Version 2.6.0 rc4
-----------------
-*(Released Mon, 9 Jan 2012)*
+*(Released Thu, 19 Jul 2012)*
+
+Very few changes from rc4 to the final release, only bugfixes:
+
+- integrated fixes from release 2.5.2 (fix general boot flag for KVM
+ instance, fix CDROM booting for KVM instances)
+- fixed node group modification of node parameters
+- fixed issue in LUClusterVerifyGroup with multi-group clusters
+- fixed generation of bash completion to ensure a stable ordering
+- fixed a few typos
+
+
+Version 2.6.0 rc3
+-----------------
+
+*(Released Fri, 13 Jul 2012)*
+
+Third release candidate for 2.6. The following changes were done from
+rc3 to rc4:
+
+- Fixed ``UpgradeConfig`` w.r.t. to disk parameters on disk objects.
+- Fixed an inconsistency in the LUXI protocol with the provided
+ arguments (NOT backwards compatible)
+- Fixed a bug with node groups ipolicy where ``min`` was greater than
+ the cluster ``std`` value
+- Implemented a new ``gnt-node list-drbd`` call to list DRBD minors for
+ easier instance debugging on nodes (requires ``hconfd`` to work)
+
+
+Version 2.6.0 rc2
+-----------------
+
+*(Released Tue, 03 Jul 2012)*
+
+Second release candidate for 2.6. The following changes were done from
+rc2 to rc3:
+
+- Fixed ``gnt-cluster verify`` regarding ``master-ip-script`` on non
+ master candidates
+- Fixed a RAPI regression on missing beparams/memory
+- Fixed redistribution of files on offline nodes
+- Added possibility to run activate-disks even though secondaries are
+ offline. With this change it relaxes also the strictness on some other
+ commands which use activate disks internally:
+ * ``gnt-instance start|reboot|rename|backup|export``
+- Made it possible to remove safely an instance if its secondaries are
+ offline
+- Made it possible to reinstall even though secondaries are offline
+
+
+Version 2.6.0 rc1
+-----------------
+
+*(Released Mon, 25 Jun 2012)*
+
+First release candidate for 2.6. The following changes were done from
+rc1 to rc2:
+
+- Fixed bugs with disk parameters and ``rbd`` templates as well as
+ ``instance_os_add``
+- Made ``gnt-instance modify`` more consistent regarding new NIC/Disk
+ behaviour. It supports now the modify operation
+- ``hcheck`` implemented to analyze cluster health and possibility of
+ improving health by rebalance
+- ``hbal`` has been improved in dealing with split instances
+
+
+Version 2.6.0 beta2
+-------------------
+
+*(Released Mon, 11 Jun 2012)*
+
+Second beta release of 2.6. The following changes were done from beta2
+to rc1:
+
+- Fixed ``daemon-util`` with non-root user models
+- Fixed creation of plain instances with ``--no-wait-for-sync``
+- Fix wrong iv_names when running ``cfgupgrade``
+- Export more information in RAPI group queries
+- Fixed bug when changing instance network interfaces
+- Extended burnin to do NIC changes
+- query: Added ``<``, ``>``, ``<=``, ``>=`` comparison operators
+- Changed default for DRBD barriers
+- Fixed DRBD error reporting for syncer rate
+- Verify the options on disk parameters
+
+And of course various fixes to documentation and improved unittests and
+QA.
+
+
+Version 2.6.0 beta1
+-------------------
+
+*(Released Wed, 23 May 2012)*
+
+First beta release of 2.6. The following changes were done from beta1 to
+beta2:
+
+- integrated patch for distributions without ``start-stop-daemon``
+- adapted example init.d script to work on Fedora
+- fixed log handling in Haskell daemons
+- adapted checks in the watcher for pycurl linked against libnss
+- add partial support for ``xl`` instead of ``xm`` for Xen
+- fixed a type issue in cluster verification
+- fixed ssconf handling in the Haskell code (was breaking confd in IPv6
+ clusters)
+
+Plus integrated fixes from the 2.5 branch:
+
+- fixed ``kvm-ifup`` to use ``/bin/bash``
+- fixed parallel build failures
+- KVM live migration when using a custom keymap
+
+
+Version 2.5.2
+-------------
+
+*(Released Tue, 24 Jul 2012)*
+
+A small bugfix release, with no new features:
+
+- fixed bash-isms in kvm-ifup, for compatibility with systems which use a
+ different default shell (e.g. Debian, Ubuntu)
+- fixed KVM startup and live migration with a custom keymap (fixes Issue
+ 243 and Debian bug #650664)
+- fixed compatibility with KVM versions that don't support multiple boot
+ devices (fixes Issue 230 and Debian bug #624256)
+
+Additionally, a few fixes were done to the build system (fixed parallel
+build failures) and to the unittests (fixed race condition in test for
+FileID functions, and the default enable/disable mode for QA test is now
+customisable).
+
+
+Version 2.5.1
+-------------
+
+*(Released Fri, 11 May 2012)*
+
+A small bugfix release.
+
+The main issues solved are on the topic of compatibility with newer LVM
+releases:
+
+- fixed parsing of ``lv_attr`` field
+- adapted to new ``vgreduce --removemissing`` behaviour where sometimes
+ the ``--force`` flag is needed
+
+Also on the topic of compatibility, ``tools/lvmstrap`` has been changed
+to accept kernel 3.x too (was hardcoded to 2.6.*).
+
+A regression present in 2.5.0 that broke handling (in the gnt-* scripts)
+of hook results and that also made display of other errors suboptimal
+was fixed; the code behaves now like 2.4 and earlier.
+
+Another change in 2.5, the cleanup of the OS scripts environment, is too
+aggressive: it removed even the ``PATH`` variable, which requires the OS
+scripts to *always* need to export it. Since this is a bit too strict,
+we now export a minimal PATH, the same that we export for hooks.
+
+The fix for issue 201 (Preserve bridge MTU in KVM ifup script) was
+integrated into this release.
+
+Finally, a few other miscellaneous changes were done (no new features,
+just small improvements):
+
+- Fix ``gnt-group --help`` display
+- Fix hardcoded Xen kernel path
+- Fix grow-disk handling of invalid units
+- Update synopsis for ``gnt-cluster repair-disk-sizes``
+- Accept both PUT and POST in noded (makes future upgrade to 2.6 easier)
+
+
+Version 2.5.0
+-------------
+
+*(Released Thu, 12 Apr 2012)*
Incompatible/important changes and bugfixes
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- Offline nodes are ignored when failing over an instance.
- Support for KVM version 1.0, which changed the version reporting format
from 3 to 2 digits.
+- TCP/IP ports used by DRBD disks are returned to a pool upon instance
+ removal.
+- ``Makefile`` is now compatible with Automake 1.11.2
- Includes all bugfixes made in the 2.4 series
New features
- Instance migration can fall back to failover if instance is not
running.
- Filters can be used when listing nodes, instances, groups and locks;
- see *ganeti(7)* manpage.
+ see :manpage:`ganeti(7)` manpage.
- Added post-execution status as variables to :doc:`hooks <hooks>`
environment.
- Instance tags are exported/imported together with the instance.
- A short delay when waiting for job changes reduces the number of LUXI
requests significantly.
- DRBD metadata volumes are overwritten with zeros during disk creation.
+- Out-of-band commands no longer acquire the cluster lock in exclusive
+ mode.
+- ``devel/upload`` now uses correct permissions for directories.
+
+
+Version 2.5.0 rc6
+-----------------
+
+*(Released Fri, 23 Mar 2012)*
+
+This was the sixth release candidate of the 2.5 series.
+
+
+Version 2.5.0 rc5
+-----------------
+
+*(Released Mon, 9 Jan 2012)*
+
+This was the fifth release candidate of the 2.5 series.
Version 2.5.0 rc4
projects / ganeti-local / blobdiff