-------------------
``ganeti-rapi`` reads users and passwords from a file (usually
-``/var/lib/ganeti/rapi_users``) on startup. After modifying the password
-file, ``ganeti-rapi`` must be restarted.
+``/var/lib/ganeti/rapi/users``) on startup. Changes to the file will be
+read automatically.
Each line consists of two or three fields separated by whitespace. The
first two fields are for username and password. The third field is
.. [#pwhash] Using the MD5 hash of username, realm and password is
- described in RFC2617_ ("HTTP Authentication"), sections 3.2.2.2 and
+ described in :rfc:`2617` ("HTTP Authentication"), sections 3.2.2.2 and
3.3. The reason for using it over another algorithm is forward
compatibility. If ``ganeti-rapi`` were to implement HTTP Digest
authentication in the future, the same hash could be used.
--------
The protocol used is JSON_ over HTTP designed after the REST_ principle.
-HTTP Basic authentication as per RFC2617_ is supported.
+HTTP Basic authentication as per :rfc:`2617` is supported.
.. _JSON: http://www.json.org/
.. _REST: http://en.wikipedia.org/wiki/Representational_State_Transfer
-.. _RFC2617: http://tools.ietf.org/rfc/rfc2617.txt
+
+
+A note on JSON as used by RAPI
+++++++++++++++++++++++++++++++
+
+JSON_ as used by Ganeti RAPI does not conform to the specification in
+:rfc:`4627`. Section 2 defines a JSON text to be either an object
+(``{"key": "value", …}``) or an array (``[1, 2, 3, …]``). In violation
+of this RAPI uses plain strings (``"master-candidate"``, ``"1234"``) for
+some requests or responses. Changing this now would likely break
+existing clients and cause a lot of trouble.
+
+.. highlight:: ruby
+
+Unlike Python's `JSON encoder and decoder
+<http://docs.python.org/library/json.html>`_, other programming
+languages or libraries may only provide a strict implementation, not
+allowing plain values. For those, responses can usually be wrapped in an
+array whose first element is then used, e.g. the response ``"1234"``
+becomes ``["1234"]``. This works equally well for more complex values.
+Example in Ruby::
+
+ require "json"
+
+ # Insert code to get response here
+ response = "\"1234\""
+
+ decoded = JSON.parse("[#{response}]").first
+
+Short of modifying the encoder to allow encoding to a less strict
+format, requests will have to be formatted by hand. Newer RAPI requests
+already use a dictionary as their input data and shouldn't cause any
+problems.
PUT or POST?
------------
-According to RFC2616 the main difference between PUT and POST is that
-POST can create new resources but PUT can only create the resource the
-URI was pointing to on the PUT request.
+According to :rfc:`2616` the main difference between PUT and POST is
+that POST can create new resources but PUT can only create the resource
+the URI was pointing to on the PUT request.
Unfortunately, due to historic reasons, the Ganeti RAPI library is not
consistent with this usage, so just use the methods as documented below
``instance-create-reqv1``
Instance creation request data version 1 supported.
+``instance-reinstall-reqv1``
+ Instance reinstall supports body parameters.
+
+
+``/2/modify``
+++++++++++++++++++++++++++++++++++++++++
+
+Modifies cluster parameters.
+
+Supports the following commands: ``PUT``.
+
+``PUT``
+~~~~~~~
+
+Returns a job ID.
+
+Body parameters:
+
+.. opcode_params:: OP_CLUSTER_SET_PARAMS
+
+
+``/2/groups``
++++++++++++++
+
+The groups resource.
+
+It supports the following commands: ``GET``, ``POST``.
+
+``GET``
+~~~~~~~
+
+Returns a list of all existing node groups.
+
+Example::
+
+ [
+ {
+ "name": "group1",
+ "uri": "\/2\/groups\/group1"
+ },
+ {
+ "name": "group2",
+ "uri": "\/2\/groups\/group2"
+ }
+ ]
+
+If the optional bool *bulk* argument is provided and set to a true value
+(i.e ``?bulk=1``), the output contains detailed information about node
+groups as a list.
+
+Example::
+
+ [
+ {
+ "name": "group1",
+ "node_cnt": 2,
+ "node_list": [
+ "node1.example.com",
+ "node2.example.com"
+ ],
+ "uuid": "0d7d407c-262e-49af-881a-6a430034bf43"
+ },
+ {
+ "name": "group2",
+ "node_cnt": 1,
+ "node_list": [
+ "node3.example.com"
+ ],
+ "uuid": "f5a277e7-68f9-44d3-a378-4b25ecb5df5c"
+ }
+ ]
+
+``POST``
+~~~~~~~~
+
+Creates a node group.
+
+If the optional bool *dry-run* argument is provided, the job will not be
+actually executed, only the pre-execution checks will be done.
+
+Returns: a job ID that can be used later for polling.
+
+Body parameters:
+
+.. opcode_params:: OP_GROUP_ADD
+
+Earlier versions used a parameter named ``name`` which, while still
+supported, has been renamed to ``group_name``.
+
+
+``/2/groups/[group_name]``
+++++++++++++++++++++++++++
+
+Returns information about a node group.
+
+It supports the following commands: ``GET``, ``DELETE``.
+
+``GET``
+~~~~~~~
+
+Returns information about a node group, similar to the bulk output from
+the node group list.
+
+``DELETE``
+~~~~~~~~~~
+
+Deletes a node group.
+
+It supports the ``dry-run`` argument.
+
+
+``/2/groups/[group_name]/modify``
++++++++++++++++++++++++++++++++++
+
+Modifies the parameters of a node group.
+
+Supports the following commands: ``PUT``.
+
+``PUT``
+~~~~~~~
+
+Returns a job ID.
+
+Body parameters:
+
+.. opcode_params:: OP_GROUP_SET_PARAMS
+ :exclude: group_name
+
+
+``/2/groups/[group_name]/rename``
++++++++++++++++++++++++++++++++++
+
+Renames a node group.
+
+Supports the following commands: ``PUT``.
+
+``PUT``
+~~~~~~~
+
+Returns a job ID.
+
+Body parameters:
+
+.. opcode_params:: OP_GROUP_RENAME
+ :exclude: group_name
+
+
+``/2/groups/[group_name]/assign-nodes``
++++++++++++++++++++++++++++++++++++++++
+
+Assigns nodes to a group.
+
+Supports the following commands: ``PUT``.
+
+``PUT``
+~~~~~~~
+
+Returns a job ID. It supports the ``dry-run`` and ``force`` arguments.
+
+Body parameters:
+
+.. opcode_params:: OP_GROUP_ASSIGN_NODES
+ :exclude: group_name, force, dry_run
``/2/instances``
Returns: a job ID that can be used later for polling.
+Body parameters:
+
+``__version__`` (int, required)
+ Must be ``1`` (older Ganeti versions used a different format for
+ instance creation requests, version ``0``, but that format is not
+ documented and should no longer be used).
+
+.. opcode_params:: OP_INSTANCE_CREATE
+
+Earlier versions used parameters named ``name`` and ``os``. These have
+been replaced by ``instance_name`` and ``os_type`` to match the
+underlying opcode. The old names can still be used.
+
+
``/2/instances/[instance_name]``
++++++++++++++++++++++++++++++++
``POST``
~~~~~~~~
-Takes the parameters ``os`` (OS template name) and ``nostartup`` (bool).
+Returns a job ID.
+
+Body parameters:
+
+``os`` (string, required)
+ Instance operating system.
+``start`` (bool, defaults to true)
+ Whether to start instance after reinstallation.
+``osparams`` (dict)
+ Dictionary with (temporary) OS parameters.
+
+For backwards compatbility, this resource also takes the query
+parameters ``os`` (OS template name) and ``nostartup`` (bool). New
+clients should use the body parameters.
``/2/instances/[instance_name]/replace-disks``
Takes no parameters.
+``/2/instances/[instance_name]/disk/[disk_index]/grow``
++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+
+Grows one disk of an instance.
+
+Supports the following commands: ``POST``.
+
+``POST``
+~~~~~~~~
+
+Returns a job ID.
+
+Body parameters:
+
+.. opcode_params:: OP_INSTANCE_GROW_DISK
+ :exclude: instance_name, disk
+
+
+``/2/instances/[instance_name]/prepare-export``
++++++++++++++++++++++++++++++++++++++++++++++++++
+
+Prepares an export of an instance.
+
+It supports the following commands: ``PUT``.
+
+``PUT``
+~~~~~~~
+
+Takes one parameter, ``mode``, for the export mode. Returns a job ID.
+
+
+``/2/instances/[instance_name]/export``
++++++++++++++++++++++++++++++++++++++++++++++++++
+
+Exports an instance.
+
+It supports the following commands: ``PUT``.
+
+``PUT``
+~~~~~~~
+
+Returns a job ID.
+
+Body parameters:
+
+.. opcode_params:: OP_BACKUP_EXPORT
+ :exclude: instance_name
+ :alias: target_node=destination
+
+
+``/2/instances/[instance_name]/migrate``
+++++++++++++++++++++++++++++++++++++++++
+
+Migrates an instance.
+
+Supports the following commands: ``PUT``.
+
+``PUT``
+~~~~~~~
+
+Returns a job ID.
+
+Body parameters:
+
+.. opcode_params:: OP_INSTANCE_MIGRATE
+ :exclude: instance_name, live
+
+
+``/2/instances/[instance_name]/rename``
+++++++++++++++++++++++++++++++++++++++++
+
+Renames an instance.
+
+Supports the following commands: ``PUT``.
+
+``PUT``
+~~~~~~~
+
+Returns a job ID.
+
+Body parameters:
+
+.. opcode_params:: OP_INSTANCE_RENAME
+ :exclude: instance_name
+
+
+``/2/instances/[instance_name]/modify``
+++++++++++++++++++++++++++++++++++++++++
+
+Modifies an instance.
+
+Supports the following commands: ``PUT``.
+
+``PUT``
+~~~~~~~
+
+Returns a job ID.
+
+Body parameters:
+
+.. opcode_params:: OP_INSTANCE_SET_PARAMS
+ :exclude: instance_name
+
+
+``/2/instances/[instance_name]/console``
+++++++++++++++++++++++++++++++++++++++++
+
+Request information for connecting to instance's console.
+
+Supports the following commands: ``GET``.
+
+``GET``
+~~~~~~~
+
+Returns a dictionary containing information about the instance's
+console. Contained keys:
+
+``instance``
+ Instance name.
+``kind``
+ Console type, one of ``ssh``, ``vnc`` or ``msg``.
+``message``
+ Message to display (``msg`` type only).
+``host``
+ Host to connect to (``ssh`` and ``vnc`` only).
+``port``
+ TCP port to connect to (``vnc`` only).
+``user``
+ Username to use (``ssh`` only).
+``command``
+ Command to execute on machine (``ssh`` only)
+``display``
+ VNC display number (``vnc`` only).
+
+
``/2/instances/[instance_name]/tags``
+++++++++++++++++++++++++++++++++++++
effects. But whether it make sense to retry depends on the error
classification:
-``resolver_error``
+.. pyassert::
+
+ errors.ECODE_ALL == set([errors.ECODE_RESOLVER, errors.ECODE_NORES,
+ errors.ECODE_INVAL, errors.ECODE_STATE, errors.ECODE_NOENT,
+ errors.ECODE_EXISTS, errors.ECODE_NOTUNIQUE, errors.ECODE_FAULT,
+ errors.ECODE_ENVIRON])
+
+:pyeval:`errors.ECODE_RESOLVER`
Resolver errors. This usually means that a name doesn't exist in DNS,
so if it's a case of slow DNS propagation the operation can be retried
later.
-``insufficient_resources``
+:pyeval:`errors.ECODE_NORES`
Not enough resources (iallocator failure, disk space, memory,
etc.). If the resources on the cluster increase, the operation might
succeed.
-``wrong_input``
+:pyeval:`errors.ECODE_INVAL`
Wrong arguments (at syntax level). The operation will not ever be
accepted unless the arguments change.
-``wrong_state``
+:pyeval:`errors.ECODE_STATE`
Wrong entity state. For example, live migration has been requested for
a down instance, or instance creation on an offline node. The
operation can be retried once the resource has changed state.
-``unknown_entity``
+:pyeval:`errors.ECODE_NOENT`
Entity not found. For example, information has been requested for an
unknown instance.
-``already_exists``
+:pyeval:`errors.ECODE_EXISTS`
Entity already exists. For example, instance creation has been
requested for an already-existing instance.
-``resource_not_unique``
+:pyeval:`errors.ECODE_NOTUNIQUE`
Resource not unique (e.g. MAC or IP duplication).
-``internal_error``
+:pyeval:`errors.ECODE_FAULT`
Internal cluster error. For example, a node is unreachable but not set
offline, or the ganeti node daemons are not working, etc. A
``gnt-cluster verify`` should be run.
-``environment_error``
+:pyeval:`errors.ECODE_ENVIRON`
Environment error (e.g. node disk error). A ``gnt-cluster verify``
should be run.
evacuate?iallocator=[iallocator]
evacuate?remote_node=[nodeX.example.com]
+The result value will be a list, each element being a triple of the job
+id (for this specific evacuation), the instance which is being evacuated
+by this job, and the node to which it is being relocated. In case the
+node is already empty, the result will be an empty list (without any
+jobs being submitted).
+
+And additional parameter ``early_release`` signifies whether to try to
+parallelize the evacuations, at the risk of increasing I/O contention
+and increasing the chances of data loss, if the primary node of any of
+the instances being evacuated is not fully healthy.
+
+If the dry-run parameter was specified, then the evacuation jobs were
+not actually submitted, and the job IDs will be null.
+
+
``/2/nodes/[node_name]/migrate``
+++++++++++++++++++++++++++++++++
``POST``
~~~~~~~~
-No parameters are required, but the bool parameter ``live`` can be set
-to use live migration (if available).
+If no mode is explicitly specified, each instances' hypervisor default
+migration mode will be used. Query parameters:
+
+``live`` (bool)
+ If set, use live migration if available.
+``mode`` (string)
+ Sets migration mode, ``live`` for live migration and ``non-live`` for
+ non-live migration. Supported by Ganeti 2.2 and above.
- migrate?live=[0|1]
``/2/nodes/[node_name]/role``
+++++++++++++++++++++++++++++
``GET``
~~~~~~~
+.. pyassert::
+
+ constants.VALID_STORAGE_TYPES == set([constants.ST_FILE,
+ constants.ST_LVM_PV,
+ constants.ST_LVM_VG])
+
Requests a list of storage units on a node. Requires the parameters
-``storage_type`` (one of ``file``, ``lvm-pv`` or ``lvm-vg``) and
+``storage_type`` (one of :pyeval:`constants.ST_FILE`,
+:pyeval:`constants.ST_LVM_PV` or :pyeval:`constants.ST_LVM_VG`) and
``output_fields``. The result will be a job id, using which the result
can be retrieved.
~~~~~~~
Modifies parameters of storage units on the node. Requires the
-parameters ``storage_type`` (one of ``file``, ``lvm-pv`` or ``lvm-vg``)
+parameters ``storage_type`` (one of :pyeval:`constants.ST_FILE`,
+:pyeval:`constants.ST_LVM_PV` or :pyeval:`constants.ST_LVM_VG`)
and ``name`` (name of the storage unit). Parameters can be passed
-additionally. Currently only ``allocatable`` (bool) is supported. The
-result will be a job id.
+additionally. Currently only :pyeval:`constants.SF_ALLOCATABLE` (bool)
+is supported. The result will be a job id.
``/2/nodes/[node_name]/storage/repair``
+++++++++++++++++++++++++++++++++++++++
``PUT``
~~~~~~~
+.. pyassert::
+
+ constants.VALID_STORAGE_OPERATIONS == {
+ constants.ST_LVM_VG: set([constants.SO_FIX_CONSISTENCY]),
+ }
+
Repairs a storage unit on the node. Requires the parameters
-``storage_type`` (currently only ``lvm-vg`` can be repaired) and
-``name`` (name of the storage unit). The result will be a job id.
+``storage_type`` (currently only :pyeval:`constants.ST_LVM_VG` can be
+repaired) and ``name`` (name of the storage unit). The result will be a
+job id.
``/2/nodes/[node_name]/tags``
+++++++++++++++++++++++++++++