from ganeti import netutils
from ganeti import backend
+# ec_id for InitConfig's temporary reservation manager
+_INITCONF_ECID = "initconfig-ecid"
+
def _InitSSHSetup():
"""Setup the SSH configuration for the cluster.
nicparams=None, hvparams=None, enabled_hypervisors=None,
modify_etc_hosts=True, modify_ssh_setup=True,
maintain_node_health=False, drbd_helper=None,
- uid_pool=None, default_iallocator=None):
+ uid_pool=None, default_iallocator=None,
+ primary_ip_version=None, prealloc_wipe_disks=False):
"""Initialise the cluster.
@type candidate_pool_size: int
" entries: %s" % invalid_hvs,
errors.ECODE_INVAL)
- hostname = netutils.GetHostname()
- if netutils.IP4Address.IsLoopback(hostname.ip):
+ ipcls = None
+ if primary_ip_version == constants.IP4_VERSION:
+ ipcls = netutils.IP4Address
+ elif primary_ip_version == constants.IP6_VERSION:
+ ipcls = netutils.IP6Address
+ else:
+ raise errors.OpPrereqError("Invalid primary ip version: %d." %
+ primary_ip_version)
+
+ hostname = netutils.GetHostname(family=ipcls.family)
+ if not ipcls.IsValid(hostname.ip):
+ raise errors.OpPrereqError("This host's IP (%s) is not a valid IPv%d"
+ " address." % (hostname.ip, primary_ip_version))
+
+ if ipcls.IsLoopback(hostname.ip):
raise errors.OpPrereqError("This host's IP (%s) resolves to a loopback"
" address. Please fix DNS or %s." %
(hostname.ip, constants.ETC_HOSTS),
errors.ECODE_ENVIRON)
- if not netutils.IPAddress.Own(hostname.ip):
+ if not ipcls.Own(hostname.ip):
raise errors.OpPrereqError("Inconsistency: this host's name resolves"
" to %s,\nbut this ip address does not"
- " belong to this host. Aborting." %
+ " belong to this host" %
hostname.ip, errors.ECODE_ENVIRON)
- clustername = netutils.GetHostname(name=cluster_name)
+ clustername = netutils.GetHostname(name=cluster_name, family=ipcls.family)
- if netutils.TcpPing(clustername.ip, constants.DEFAULT_NODED_PORT,
- timeout=5):
- raise errors.OpPrereqError("Cluster IP already active. Aborting.",
+ if netutils.TcpPing(clustername.ip, constants.DEFAULT_NODED_PORT, timeout=5):
+ raise errors.OpPrereqError("Cluster IP already active",
errors.ECODE_NOTUNIQUE)
- if secondary_ip:
- if not netutils.IP4Address.IsValid(secondary_ip):
- raise errors.OpPrereqError("Invalid secondary ip given",
+ if not secondary_ip:
+ if primary_ip_version == constants.IP6_VERSION:
+ raise errors.OpPrereqError("When using a IPv6 primary address, a valid"
+ " IPv4 address must be given as secondary",
errors.ECODE_INVAL)
- if (secondary_ip != hostname.ip and
- not netutils.IPAddress.Own(secondary_ip)):
- raise errors.OpPrereqError("You gave %s as secondary IP,"
- " but it does not belong to this host." %
- secondary_ip, errors.ECODE_ENVIRON)
- else:
secondary_ip = hostname.ip
+ if not netutils.IP4Address.IsValid(secondary_ip):
+ raise errors.OpPrereqError("Secondary IP address (%s) has to be a valid"
+ " IPv4 address." % secondary_ip,
+ errors.ECODE_INVAL)
+
+ if not netutils.IP4Address.Own(secondary_ip):
+ raise errors.OpPrereqError("You gave %s as secondary IP,"
+ " but it does not belong to this host." %
+ secondary_ip, errors.ECODE_ENVIRON)
+
if vg_name is not None:
# Check if volume group is valid
vgstatus = utils.CheckVolumeGroupSize(utils.ListVolumeGroups(), vg_name,
sshkey = sshline.split(" ")[1]
if modify_etc_hosts:
- utils.AddHostToEtcHosts(hostname.name)
+ utils.AddHostToEtcHosts(hostname.name, hostname.ip)
if modify_ssh_setup:
_InitSSHSetup()
uid_pool=uid_pool,
ctime=now,
mtime=now,
- uuid=utils.NewUUID(),
maintain_node_health=maintain_node_health,
drbd_usermode_helper=drbd_helper,
default_iallocator=default_iallocator,
+ primary_ip_family=ipcls.family,
+ prealloc_wipe_disks=prealloc_wipe_disks,
)
master_node_config = objects.Node(name=hostname.name,
primary_ip=hostname.ip,
serial_no=1,
master_candidate=True,
offline=False, drained=False,
+ ctime=now, mtime=now,
)
InitConfig(constants.CONFIG_VERSION, cluster_config, master_node_config)
cfg = config.ConfigWriter(offline=True)
@param cfg_file: configuration file path
"""
+ uuid_generator = config.TemporaryReservationManager()
+ cluster_config.uuid = uuid_generator.Generate([], utils.NewUUID,
+ _INITCONF_ECID)
+ master_node_config.uuid = uuid_generator.Generate([], utils.NewUUID,
+ _INITCONF_ECID)
nodes = {
master_node_config.name: master_node_config,
}
-
+ default_nodegroup = objects.NodeGroup(
+ uuid=uuid_generator.Generate([], utils.NewUUID, _INITCONF_ECID),
+ name="default",
+ members=[master_node_config.name],
+ )
+ nodegroups = {
+ default_nodegroup.uuid: default_nodegroup,
+ }
now = time.time()
config_data = objects.ConfigData(version=version,
cluster=cluster_config,
+ nodegroups=nodegroups,
nodes=nodes,
instances={},
serial_no=1,
@param ssh_key_check: whether to do a strict key check
"""
- sshrunner = ssh.SshRunner(cluster_name)
+ family = ssconf.SimpleStore().GetPrimaryIPFamily()
+ sshrunner = ssh.SshRunner(cluster_name,
+ ipv6=family==netutils.IP6Address.family)
noded_cert = utils.ReadFile(constants.NODED_CERT_FILE)
rapi_cert = utils.ReadFile(constants.RAPI_CERT_FILE)
if not confd_hmac_key.endswith("\n"):
confd_hmac_key += "\n"
+ bind_address = constants.IP4_ADDRESS_ANY
+ if family == netutils.IP6Address.family:
+ bind_address = constants.IP6_ADDRESS_ANY
+
# set up inter-node password and certificate and restarts the node daemon
# and then connect with ssh to set password and start ganeti-noded
# note that all the below variables are sanitized at this point,
# either by being constants or by the checks above
- # TODO: Could this command exceed a shell's maximum command length?
- mycommand = ("umask 077 && "
- "cat > '%s' << '!EOF.' && \n"
- "%s!EOF.\n"
- "cat > '%s' << '!EOF.' && \n"
- "%s!EOF.\n"
- "cat > '%s' << '!EOF.' && \n"
- "%s!EOF.\n"
- "chmod 0400 %s %s %s && "
- "%s start %s" %
- (constants.NODED_CERT_FILE, noded_cert,
- constants.RAPI_CERT_FILE, rapi_cert,
- constants.CONFD_HMAC_KEY, confd_hmac_key,
- constants.NODED_CERT_FILE, constants.RAPI_CERT_FILE,
- constants.CONFD_HMAC_KEY,
- constants.DAEMON_UTIL, constants.NODED))
+ sshrunner.CopyFileToNode(node, constants.NODED_CERT_FILE)
+ sshrunner.CopyFileToNode(node, constants.RAPI_CERT_FILE)
+ sshrunner.CopyFileToNode(node, constants.CONFD_HMAC_KEY)
+ mycommand = ("%s stop-all; %s start %s -b '%s'" % (constants.DAEMON_UTIL,
+ constants.DAEMON_UTIL,
+ constants.NODED,
+ bind_address))
result = sshrunner.Run(node, 'root', mycommand, batch=False,
ask_key=ssh_key_check,
- use_cluster_key=False,
+ use_cluster_key=True,
strict_host_check=ssh_key_check)
if result.failed:
raise errors.OpExecError("Remote command on node %s, error: %s,"
logging.info("Setting master to %s, old master: %s", new_master, old_master)
+ try:
+ # instantiate a real config writer, as we now know we have the
+ # configuration data
+ cfg = config.ConfigWriter(accept_foreign=True)
+
+ cluster_info = cfg.GetClusterInfo()
+ cluster_info.master_node = new_master
+ # this will also regenerate the ssconf files, since we updated the
+ # cluster info
+ cfg.Update(cluster_info, logging.error)
+ except errors.ConfigurationError, err:
+ logging.error("Error while trying to set the new master: %s",
+ str(err))
+ return 1
+
+ # if cfg.Update worked, then it means the old master daemon won't be
+ # able now to write its own config file (we rely on locking in both
+ # backend.UploadFile() and ConfigWriter._Write(); hence the next
+ # step is to kill the old master
+
+ logging.info("Stopping the master daemon on node %s", old_master)
+
result = rpc.RpcRunner.call_node_stop_master(old_master, True)
msg = result.fail_msg
if msg:
logging.error("Could not disable the master role on the old master"
" %s, please disable manually: %s", old_master, msg)
+ logging.info("Checking master IP non-reachability...")
+
master_ip = sstore.GetMasterIP()
total_timeout = 30
# Here we have a phase where no master should be running
" continuing but activating the master on the current"
" node will probably fail", total_timeout)
- # instantiate a real config writer, as we now know we have the
- # configuration data
- cfg = config.ConfigWriter()
-
- cluster_info = cfg.GetClusterInfo()
- cluster_info.master_node = new_master
- # this will also regenerate the ssconf files, since we updated the
- # cluster info
- cfg.Update(cluster_info, logging.error)
+ logging.info("Starting the master daemons on the new master")
result = rpc.RpcRunner.call_node_start_master(new_master, True, no_voting)
msg = result.fail_msg
" %s, please check: %s", new_master, msg)
rcode = 1
+ logging.info("Master failed over from %s to %s", old_master, new_master)
return rcode
if msg:
logging.warning("Error contacting node %s: %s", node, msg)
fail = True
+ # for now we accept both length 3 and 4 (data[3] is primary ip version)
elif not isinstance(data, (tuple, list)) or len(data) < 3:
logging.warning("Invalid data received from node %s: %s", node, data)
fail = True
projects / ganeti-local / blobdiff