+ self.instance = instance
+
+ def _WaitUntilSync(self):
+ """Poll with custom rpc for disk sync.
+
+ This uses our own step-based rpc call.
+
+ """
+ self.feedback_fn("* wait until resync is done")
+ all_done = False
+ while not all_done:
+ all_done = True
+ result = self.rpc.call_drbd_wait_sync(self.all_nodes,
+ self.nodes_ip,
+ self.instance.disks)
+ min_percent = 100
+ for node, nres in result.items():
+ msg = nres.RemoteFailMsg()
+ if msg:
+ raise errors.OpExecError("Cannot resync disks on node %s: %s" %
+ (node, msg))
+ node_done, node_percent = nres.payload
+ all_done = all_done and node_done
+ if node_percent is not None:
+ min_percent = min(min_percent, node_percent)
+ if not all_done:
+ if min_percent < 100:
+ self.feedback_fn(" - progress: %.1f%%" % min_percent)
+ time.sleep(2)
+
+ def _EnsureSecondary(self, node):
+ """Demote a node to secondary.
+
+ """
+ self.feedback_fn("* switching node %s to secondary mode" % node)
+
+ for dev in self.instance.disks:
+ self.cfg.SetDiskID(dev, node)
+
+ result = self.rpc.call_blockdev_close(node, self.instance.name,
+ self.instance.disks)
+ msg = result.RemoteFailMsg()
+ if msg:
+ raise errors.OpExecError("Cannot change disk to secondary on node %s,"
+ " error %s" % (node, msg))
+
+ def _GoStandalone(self):
+ """Disconnect from the network.
+
+ """
+ self.feedback_fn("* changing into standalone mode")
+ result = self.rpc.call_drbd_disconnect_net(self.all_nodes, self.nodes_ip,
+ self.instance.disks)
+ for node, nres in result.items():
+ msg = nres.RemoteFailMsg()
+ if msg:
+ raise errors.OpExecError("Cannot disconnect disks node %s,"
+ " error %s" % (node, msg))
+
+ def _GoReconnect(self, multimaster):
+ """Reconnect to the network.
+
+ """
+ if multimaster:
+ msg = "dual-master"
+ else:
+ msg = "single-master"
+ self.feedback_fn("* changing disks into %s mode" % msg)
+ result = self.rpc.call_drbd_attach_net(self.all_nodes, self.nodes_ip,
+ self.instance.disks,
+ self.instance.name, multimaster)
+ for node, nres in result.items():
+ msg = nres.RemoteFailMsg()
+ if msg:
+ raise errors.OpExecError("Cannot change disks config on node %s,"
+ " error: %s" % (node, msg))
+
+ def _ExecCleanup(self):
+ """Try to cleanup after a failed migration.
+
+ The cleanup is done by:
+ - check that the instance is running only on one node
+ (and update the config if needed)
+ - change disks on its secondary node to secondary
+ - wait until disks are fully synchronized
+ - disconnect from the network
+ - change disks into single-master mode
+ - wait again until disks are fully synchronized
+
+ """
+ instance = self.instance
+ target_node = self.target_node
+ source_node = self.source_node
+
+ # check running on only one node
+ self.feedback_fn("* checking where the instance actually runs"
+ " (if this hangs, the hypervisor might be in"
+ " a bad state)")
+ ins_l = self.rpc.call_instance_list(self.all_nodes, [instance.hypervisor])
+ for node, result in ins_l.items():
+ result.Raise()
+ if not isinstance(result.data, list):
+ raise errors.OpExecError("Can't contact node '%s'" % node)
+
+ runningon_source = instance.name in ins_l[source_node].data
+ runningon_target = instance.name in ins_l[target_node].data
+
+ if runningon_source and runningon_target:
+ raise errors.OpExecError("Instance seems to be running on two nodes,"
+ " or the hypervisor is confused. You will have"
+ " to ensure manually that it runs only on one"
+ " and restart this operation.")
+
+ if not (runningon_source or runningon_target):
+ raise errors.OpExecError("Instance does not seem to be running at all."
+ " In this case, it's safer to repair by"
+ " running 'gnt-instance stop' to ensure disk"
+ " shutdown, and then restarting it.")
+
+ if runningon_target:
+ # the migration has actually succeeded, we need to update the config
+ self.feedback_fn("* instance running on secondary node (%s),"
+ " updating config" % target_node)
+ instance.primary_node = target_node
+ self.cfg.Update(instance)
+ demoted_node = source_node
+ else:
+ self.feedback_fn("* instance confirmed to be running on its"
+ " primary node (%s)" % source_node)
+ demoted_node = target_node
+
+ self._EnsureSecondary(demoted_node)
+ try:
+ self._WaitUntilSync()
+ except errors.OpExecError:
+ # we ignore here errors, since if the device is standalone, it
+ # won't be able to sync
+ pass
+ self._GoStandalone()
+ self._GoReconnect(False)
+ self._WaitUntilSync()
+
+ self.feedback_fn("* done")
+
+ def _RevertDiskStatus(self):
+ """Try to revert the disk status after a failed migration.
+
+ """
+ target_node = self.target_node
+ try:
+ self._EnsureSecondary(target_node)
+ self._GoStandalone()
+ self._GoReconnect(False)
+ self._WaitUntilSync()
+ except errors.OpExecError, err:
+ self.LogWarning("Migration failed and I can't reconnect the"
+ " drives: error '%s'\n"
+ "Please look and recover the instance status" %
+ str(err))
+
+ def _AbortMigration(self):
+ """Call the hypervisor code to abort a started migration.
+
+ """
+ instance = self.instance
+ target_node = self.target_node
+ migration_info = self.migration_info
+
+ abort_result = self.rpc.call_finalize_migration(target_node,
+ instance,
+ migration_info,
+ False)
+ abort_msg = abort_result.RemoteFailMsg()
+ if abort_msg:
+ logging.error("Aborting migration failed on target node %s: %s" %
+ (target_node, abort_msg))
+ # Don't raise an exception here, as we stil have to try to revert the
+ # disk status, even if this step failed.
+
+ def _ExecMigration(self):
+ """Migrate an instance.
+
+ The migrate is done by:
+ - change the disks into dual-master mode
+ - wait until disks are fully synchronized again
+ - migrate the instance
+ - change disks on the new secondary node (the old primary) to secondary
+ - wait until disks are fully synchronized
+ - change disks into single-master mode
+
+ """
+ instance = self.instance
+ target_node = self.target_node
+ source_node = self.source_node
+
+ self.feedback_fn("* checking disk consistency between source and target")
+ for dev in instance.disks:
+ if not _CheckDiskConsistency(self, dev, target_node, False):
+ raise errors.OpExecError("Disk %s is degraded or not fully"
+ " synchronized on target node,"
+ " aborting migrate." % dev.iv_name)
+
+ # First get the migration information from the remote node
+ result = self.rpc.call_migration_info(source_node, instance)
+ msg = result.RemoteFailMsg()
+ if msg:
+ log_err = ("Failed fetching source migration information from %s: %s" %
+ (source_node, msg))
+ logging.error(log_err)
+ raise errors.OpExecError(log_err)
+
+ self.migration_info = migration_info = result.payload
+
+ # Then switch the disks to master/master mode
+ self._EnsureSecondary(target_node)
+ self._GoStandalone()
+ self._GoReconnect(True)
+ self._WaitUntilSync()
+
+ self.feedback_fn("* preparing %s to accept the instance" % target_node)
+ result = self.rpc.call_accept_instance(target_node,
+ instance,
+ migration_info,
+ self.nodes_ip[target_node])
+
+ msg = result.RemoteFailMsg()
+ if msg:
+ logging.error("Instance pre-migration failed, trying to revert"
+ " disk status: %s", msg)
+ self._AbortMigration()
+ self._RevertDiskStatus()
+ raise errors.OpExecError("Could not pre-migrate instance %s: %s" %
+ (instance.name, msg))
+
+ self.feedback_fn("* migrating instance to %s" % target_node)
+ time.sleep(10)
+ result = self.rpc.call_instance_migrate(source_node, instance,
+ self.nodes_ip[target_node],
+ self.op.live)
+ msg = result.RemoteFailMsg()
+ if msg:
+ logging.error("Instance migration failed, trying to revert"
+ " disk status: %s", msg)
+ self._AbortMigration()
+ self._RevertDiskStatus()
+ raise errors.OpExecError("Could not migrate instance %s: %s" %
+ (instance.name, msg))
+ time.sleep(10)
+
+ instance.primary_node = target_node
+ # distribute new instance config to the other nodes
+ self.cfg.Update(instance)
+
+ result = self.rpc.call_finalize_migration(target_node,
+ instance,
+ migration_info,
+ True)
+ msg = result.RemoteFailMsg()
+ if msg:
+ logging.error("Instance migration succeeded, but finalization failed:"
+ " %s" % msg)
+ raise errors.OpExecError("Could not finalize instance migration: %s" %
+ msg)
+
+ self._EnsureSecondary(source_node)
+ self._WaitUntilSync()
+ self._GoStandalone()
+ self._GoReconnect(False)
+ self._WaitUntilSync()
+
+ self.feedback_fn("* done")
+
+ def Exec(self, feedback_fn):
+ """Perform the migration.
+
+ """
+ self.feedback_fn = feedback_fn
+
+ self.source_node = self.instance.primary_node
+ self.target_node = self.instance.secondary_nodes[0]
+ self.all_nodes = [self.source_node, self.target_node]
+ self.nodes_ip = {
+ self.source_node: self.cfg.GetNodeInfo(self.source_node).secondary_ip,
+ self.target_node: self.cfg.GetNodeInfo(self.target_node).secondary_ip,
+ }
+ if self.op.cleanup:
+ return self._ExecCleanup()
+ else:
+ return self._ExecMigration()
+
+
+def _CreateBlockDev(lu, node, instance, device, force_create,
+ info, force_open):
+ """Create a tree of block devices on a given node.
projects / ganeti-local / blobdiff