ADD-TAGS
~~~~~~~~
-**add-tags** [--from *file*] {*tag*...}
+**add-tags** [\--from *file*] {*tag*...}
Add tags to the cluster. If any of the tags contains invalid
characters, the entire operation will abort.
COMMAND
~~~~~~~
-**command** [-n *node*] [-g *group*] {*command*}
+**command** [-n *node*] [-g *group*] [-M] {*command*}
Executes a command on all nodes. If the option ``-n`` is not given,
the command will be executed on all nodes, otherwise it will be
# gnt-cluster command -g default date
+The ``-M`` option can be used to prepend the node name to all output
+lines.
+
The command is executed serially on the selected nodes. If the
master node is present in the list, the command will be executed
last on the master. Regarding the other nodes, the execution order
COPYFILE
~~~~~~~~
-| **copyfile** [--use-replication-network] [-n *node*] [-g *group*]
+| **copyfile** [\--use-replication-network] [-n *node*] [-g *group*]
| {*file*}
Copies a file to all or to some nodes. The argument specifies the
DEACTIVATE-MASTER-IP
~~~~~~~~~~~~~~~~~~~~
-**deactivate-master-ip** [--yes]
+**deactivate-master-ip** [\--yes]
Deactivates the master IP on the master node.
DESTROY
~~~~~~~
-**destroy** {--yes-do-it}
+**destroy** {\--yes-do-it}
Remove all configuration files related to the cluster, so that a
**gnt-cluster init** can be done again afterwards.
Since this is a dangerous command, you are required to pass the
-argument *--yes-do-it.*
+argument *\--yes-do-it.*
EPO
~~~
-**epo** [--on] [--groups|--all] [--power-delay] *arguments*
+**epo** [\--on] [\--groups|\--all] [\--power-delay] *arguments*
Performs an emergency power-off on nodes given as arguments. If
``--groups`` is given, arguments are node groups. If ``--all`` is
INFO
~~~~
-**info** [--roman]
+**info** [\--roman]
Shows runtime cluster information: cluster name, architecture (32
or 64 bit), master node, node list and instance list.
~~~~
| **init**
-| [{-s|--secondary-ip} *secondary\_ip*]
-| [--vg-name *vg-name*]
-| [--master-netdev *interface-name*]
-| [--master-netmask *netmask*]
-| [--use-external-mip-script {yes \| no}]
-| [{-m|--mac-prefix} *mac-prefix*]
-| [--no-lvm-storage]
-| [--no-etc-hosts]
-| [--no-ssh-init]
-| [--file-storage-dir *dir*]
-| [--enabled-hypervisors *hypervisors*]
-| [{-H|--hypervisor-parameters} *hypervisor*:*hv-param*=*value*[,*hv-param*=*value*...]]
-| [{-B|--backend-parameters} *be-param*=*value* [,*be-param*=*value*...]]
-| [{-N|--nic-parameters} *nic-param*=*value* [,*nic-param*=*value*...]]
-| [{-D|--disk-parameters} *disk-template*:*disk-param*=*value* [,*disk-param*=*value*...]]
-| [--maintain-node-health {yes \| no}]
-| [--uid-pool *user-id pool definition*]
-| [{-I|--default-iallocator} *default instance allocator*]
-| [--primary-ip-version *version*]
-| [--prealloc-wipe-disks {yes \| no}]
-| [--node-parameters *ndparams*]
-| [{-C|--candidate-pool-size} *candidate\_pool\_size*]
+| [{-s|\--secondary-ip} *secondary\_ip*]
+| [\--vg-name *vg-name*]
+| [\--master-netdev *interface-name*]
+| [\--master-netmask *netmask*]
+| [\--use-external-mip-script {yes \| no}]
+| [{-m|\--mac-prefix} *mac-prefix*]
+| [\--no-lvm-storage]
+| [\--no-etc-hosts]
+| [\--no-ssh-init]
+| [\--file-storage-dir *dir*]
+| [\--enabled-hypervisors *hypervisors*]
+| [{-H|\--hypervisor-parameters} *hypervisor*:*hv-param*=*value*[,*hv-param*=*value*...]]
+| [{-B|\--backend-parameters} *be-param*=*value*[,*be-param*=*value*...]]
+| [{-N|\--nic-parameters} *nic-param*=*value*[,*nic-param*=*value*...]]
+| [{-D|\--disk-parameters} *disk-template*:*disk-param*=*value*[,*disk-param*=*value*...]]
+| [\--maintain-node-health {yes \| no}]
+| [\--uid-pool *user-id pool definition*]
+| [{-I|\--default-iallocator} *default instance allocator*]
+| [\--primary-ip-version *version*]
+| [\--prealloc-wipe-disks {yes \| no}]
+| [\--node-parameters *ndparams*]
+| [{-C|\--candidate-pool-size} *candidate\_pool\_size*]
+| [\--specs-cpu-count *spec-param*=*value* [,*spec-param*=*value*...]]
+| [\--specs-disk-count *spec-param*=*value* [,*spec-param*=*value*...]]
+| [\--specs-disk-size *spec-param*=*value* [,*spec-param*=*value*...]]
+| [\--specs-mem-size *spec-param*=*value* [,*spec-param*=*value*...]]
+| [\--specs-nic-count *spec-param*=*value* [,*spec-param*=*value*...]]
+| [\--ipol-disk-templates *template* [,*template*...]]
+| [\--disk-state *diskstate*]
+| [\--hypervisor-state *hvstate*]
| {*clustername*}
This commands is only run once initially on the first node of the
interpreted as a CIDR netmask. The default value is 32 for an IPv4
address and 128 for an IPv6 address.
-The ``--use-external-mip-script`` options allows to specify
-whether to use an user-supplied master IP address setup script, whose
-location is ``/etc/ganeti/scripts/master-ip-setup``. If the option value
-is set to False, the default script, whose location is
-``/usr/local/lib/ganeti/tools/master-ip-setup``, will be executed.
+The ``--use-external-mip-script`` option allows to specify whether to
+use an user-supplied master IP address setup script, whose location is
+``@SYSCONFDIR@/ganeti/scripts/master-ip-setup``. If the option value is
+set to False, the default script (located at
+``@PKGLIBDIR@/tools/master-ip-setup``) will be executed.
The ``-m (--mac-prefix)`` option will let you specify a three byte
prefix under which the virtual MAC addresses of your instances will be
use for storing the instance disk files when using file storage as
backend for instance disks.
-The ``--prealloc-wipe-disks`` sets a cluster wide configuration
-value for wiping disks prior to allocation. This increases security
-on instance level as the instance can't access untouched data from
-it's underlying storage.
+The ``--prealloc-wipe-disks`` sets a cluster wide configuration value
+for wiping disks prior to allocation and size changes (``gnt-instance
+grow-disk``). This increases security on instance level as the instance
+can't access untouched data from its underlying storage.
The ``--enabled-hypervisors`` option allows you to set the list of
hypervisors that will be enabled for this cluster. Instance
list of key-value pairs. These parameters can only be specified at
cluster and node group level; the cluster-level parameter are inherited
by the node group at the moment of its creation, and can be further
-modified at node group level using the **gnt-group**(8) command.
+modified at node group level using the **gnt-group**(8) command.
-List of disk parameters available for the **drbd** template:
+The following is the list of disk parameters available for the **drbd**
+template, with measurement units specified in square brackets at the end
+of the description (when applicable):
resync-rate
- Re-synchronization rate, expressed in KiB/s
+ Static re-synchronization rate. [KiB/s]
data-stripes
- Number of stripes to use for data LVs
+ Number of stripes to use for data LVs.
meta-stripes
- Number of stripes to use for meta LVs
+ Number of stripes to use for meta LVs.
disk-barriers
What kind of barriers to **disable** for disks. It can either assume
the value "n", meaning no barrier disabled, or a non-empty string
containing a subset of the characters "bfd". "b" means disable disk
- barriers, "f" means disable disk flushes, "d" disables disk drains
+ barriers, "f" means disable disk flushes, "d" disables disk drains.
meta-barriers
Boolean value indicating whether the meta barriers should be
String containing additional parameters to be appended to the
arguments list of ``drbdsetup net``.
+dynamic-resync
+ Boolean indicating whether to use the dynamic resync speed
+ controller or not. If enabled, c-plan-ahead must be non-zero and all
+ the c-* parameters will be used by DRBD. Otherwise, the value of
+ resync-rate will be used as a static resync speed.
+
+c-plan-ahead
+ Agility factor of the dynamic resync speed controller. (the higher,
+ the slower the algorithm will adapt the resync speed). A value of 0
+ (that is the default) disables the controller. [ds]
+
+c-fill-target
+ Maximum amount of in-flight resync data for the dynamic resync speed
+ controller. [sectors]
+
+c-delay-target
+ Maximum estimated peer response latency for the dynamic resync speed
+ controller. [ds]
+
+c-min-rate
+ Minimum resync speed for the dynamic resync speed controller. [KiB/s]
+
+c-max-rate
+ Upper bound on resync speed for the dynamic resync speed controller.
+ [KiB/s]
+
List of parameters available for the **plain** template:
stripes
- Number of stripes to use for new LVs
+ Number of stripes to use for new LVs.
+
+List of parameters available for the **rbd** template:
+
+pool
+ The RADOS cluster pool, inside which all rbd volumes will reside.
+ When a new RADOS cluster is deployed, the default pool to put rbd
+ volumes (Images in RADOS terminology) is 'rbd'.
The option ``--maintain-node-health`` allows one to enable/disable
automatic maintenance actions on nodes. Currently these include
that the master will try to keep as master\_candidates. For more
details about this role and other node roles, see the ganeti(7).
+The ``--specs-...`` and ``--ipol-disk-templates`` options specify
+instance policy on the cluster. For the ``--specs-...`` options, each
+option can have three values: ``min``, ``max`` and ``std``, which can
+also be modified on group level (except for ``std``, which is defined
+once for the entire cluster). Please note, that ``std`` values are not
+the same as defaults set by ``--beparams``, but they are used for the
+capacity calculations. The ``--ipol-disk-templates`` option takes a
+comma-separated list of disk templates.
+
+- ``--specs-cpu-count`` limits the number of VCPUs that can be used by an
+ instance.
+- ``--specs-disk-count`` limits the number of disks
+- ``--specs-disk-size`` limits the disk size for every disk used
+- ``--specs-mem-size`` limits the amount of memory available
+- ``--specs-nic-count`` sets limits on the number of NICs used
+- ``--ipol-disk-templates`` limits the allowed disk templates
+
+For details about how to use ``--hypervisor-state`` and ``--disk-state``
+have a look at **ganeti**(7).
+
LIST-TAGS
~~~~~~~~~
MASTER-FAILOVER
~~~~~~~~~~~~~~~
-**master-failover** [--no-voting]
+**master-failover** [\--no-voting]
Failover the master role to the current node.
MODIFY
~~~~~~
-| **modify**
-| [--vg-name *vg-name*]
-| [--no-lvm-storage]
-| [--enabled-hypervisors *hypervisors*]
-| [{-H|--hypervisor-parameters} *hypervisor*:*hv-param*=*value*[,*hv-param*=*value*...]]
-| [{-B|--backend-parameters} *be-param*=*value* [,*be-param*=*value*...]]
-| [{-N|--nic-parameters} *nic-param*=*value* [,*nic-param*=*value*...]]
-| [{-D|--disk-parameters} *disk-template*:*disk-param*=*value* [,*disk-param*=*value*...]]
-| [--uid-pool *user-id pool definition*]
-| [--add-uids *user-id pool definition*]
-| [--remove-uids *user-id pool definition*]
-| [{-C|--candidate-pool-size} *candidate\_pool\_size*]
-| [--maintain-node-health {yes \| no}]
-| [--prealloc-wipe-disks {yes \| no}]
-| [{-I|--default-iallocator} *default instance allocator*]
-| [--reserved-lvs=*NAMES*]
-| [--node-parameters *ndparams*]
-| [--master-netdev *interface-name*]
-| [--master-netmask *netmask*]
-| [--use-external-mip-script {yes \| no}]
-| [--hypervisor-state *hvstate*]
-| [--disk-state *diskstate*]
+| **modify** [\--submit]
+| [\--vg-name *vg-name*]
+| [\--no-lvm-storage]
+| [\--enabled-hypervisors *hypervisors*]
+| [{-H|\--hypervisor-parameters} *hypervisor*:*hv-param*=*value*[,*hv-param*=*value*...]]
+| [{-B|\--backend-parameters} *be-param*=*value*[,*be-param*=*value*...]]
+| [{-N|\--nic-parameters} *nic-param*=*value*[,*nic-param*=*value*...]]
+| [{-D|\--disk-parameters} *disk-template*:*disk-param*=*value*[,*disk-param*=*value*...]]
+| [\--uid-pool *user-id pool definition*]
+| [\--add-uids *user-id pool definition*]
+| [\--remove-uids *user-id pool definition*]
+| [{-C|\--candidate-pool-size} *candidate\_pool\_size*]
+| [\--maintain-node-health {yes \| no}]
+| [\--prealloc-wipe-disks {yes \| no}]
+| [{-I|\--default-iallocator} *default instance allocator*]
+| [\--reserved-lvs=*NAMES*]
+| [\--node-parameters *ndparams*]
+| [\--master-netdev *interface-name*]
+| [\--master-netmask *netmask*]
+| [\--use-external-mip-script {yes \| no}]
+| [\--hypervisor-state *hvstate*]
+| [\--disk-state *diskstate*]
+| [\--specs-cpu-count *spec-param*=*value* [,*spec-param*=*value*...]]
+| [\--specs-disk-count *spec-param*=*value* [,*spec-param*=*value*...]]
+| [\--specs-disk-size *spec-param*=*value* [,*spec-param*=*value*...]]
+| [\--specs-mem-size *spec-param*=*value* [,*spec-param*=*value*...]]
+| [\--specs-nic-count *spec-param*=*value* [,*spec-param*=*value*...]]
+| [\--ipol-disk-templates *template* [,*template*...]]
+
Modify the options for the cluster.
command.
The ``--hypervisor-state`` and ``--disk-state`` options are described in
-detail in **ganeti**(7).
+detail in **ganeti(7)**.
The ``--add-uids`` and ``--remove-uids`` options can be used to
modify the user-id pool by adding/removing a list of user-ids or
command. To clear the default iallocator, just pass an empty string
('').
+The ``--specs-...`` and ``--ipol-disk-templates`` options are described
+in the **init** command.
+
+See **ganeti(7)** for a description of ``--submit`` and other common
+options.
+
QUEUE
~~~~~
The ``info`` option shows whether the watcher is currently paused.
-redist-conf
+REDIST-CONF
~~~~~~~~~~~
-**redist-conf** [--submit]
+**redist-conf** [\--submit]
This command forces a full push of configuration files from the
master node to the other nodes in the cluster. This is normally not
needed, but can be run if the **verify** complains about
configuration mismatches.
-The ``--submit`` option is used to send the job to the master
-daemon but not wait for its completion. The job ID will be shown so
-that it can be examined via **gnt-job info**.
+See **ganeti(7)** for a description of ``--submit`` and other common
+options.
REMOVE-TAGS
~~~~~~~~~~~
-**remove-tags** [--from *file*] {*tag*...}
+**remove-tags** [\--from *file*] {*tag*...}
Remove tags from the cluster. If any of the tags are not existing
on the cluster, the entire operation will abort.
~~~~~~~~~~~~
| **renew-crypto** [-f]
-| [--new-cluster-certificate] [--new-confd-hmac-key]
-| [--new-rapi-certificate] [--rapi-certificate *rapi-cert*]
-| [--new-spice-certificate | --spice-certificate *spice-cert*
-| -- spice-ca-certificate *spice-ca-cert*]
-| [--new-cluster-domain-secret] [--cluster-domain-secret *filename*]
+| [\--new-cluster-certificate] [\--new-confd-hmac-key]
+| [\--new-rapi-certificate] [\--rapi-certificate *rapi-cert*]
+| [\--new-spice-certificate | \--spice-certificate *spice-cert*
+| \--spice-ca-certificate *spice-ca-cert*]
+| [\--new-cluster-domain-secret] [\--cluster-domain-secret *filename*]
This command will stop all Ganeti daemons in the cluster and start
them again once the new certificates and keys are replicated. The
Note that only active disks can be checked by this command; in case
a disk cannot be activated it's advised to use
-**gnt-instance activate-disks --ignore-size ...** to force
+**gnt-instance activate-disks \--ignore-size ...** to force
activation without regard to the current size.
When the all disk sizes are consistent, the command will return no
VERIFY
~~~~~~
-| **verify** [--no-nplus1-mem] [--node-group *nodegroup*]
-| [--error-codes] [{-I|--ignore-errors} *errorcode*]
-| [{-I|--ignore-errors} *errorcode*...]
+| **verify** [\--no-nplus1-mem] [\--node-group *nodegroup*]
+| [\--error-codes] [{-I|\--ignore-errors} *errorcode*]
+| [{-I|\--ignore-errors} *errorcode*...]
Verify correctness of cluster configuration. This is safe with
respect to running instances, and incurs no downtime of the