+ """
+ result = utils.RunCmd(["drbdmeta", "--force", cls._DevPath(minor),
+ "v08", dev_path, "0", "create-md"])
+ if result.failed:
+ raise errors.BlockDeviceError("Can't initialize meta device: %s" %
+ result.output)
+
+ @classmethod
+ def _FindUnusedMinor(cls):
+ """Find an unused DRBD device.
+
+ This is specific to 8.x as the minors are allocated dynamically,
+ so non-existing numbers up to a max minor count are actually free.
+
+ """
+ data = cls._GetProcData()
+
+ unused_line = re.compile("^ *([0-9]+): cs:Unconfigured$")
+ used_line = re.compile("^ *([0-9]+): cs:")
+ highest = None
+ for line in data:
+ match = unused_line.match(line)
+ if match:
+ return int(match.group(1))
+ match = used_line.match(line)
+ if match:
+ minor = int(match.group(1))
+ highest = max(highest, minor)
+ if highest is None: # there are no minors in use at all
+ return 0
+ if highest >= cls._MAX_MINORS:
+ logger.Error("Error: no free drbd minors!")
+ raise errors.BlockDeviceError("Can't find a free DRBD minor")
+ return highest + 1
+
+ @classmethod
+ def _IsValidMeta(cls, meta_device):
+ """Check if the given meta device looks like a valid one.
+
+ """
+ minor = cls._FindUnusedMinor()
+ minor_path = cls._DevPath(minor)
+ result = utils.RunCmd(["drbdmeta", minor_path,
+ "v08", meta_device, "0",
+ "dstate"])
+ if result.failed:
+ logger.Error("Invalid meta device %s: %s" % (meta_device, result.output))
+ return False
+ return True
+
+ @classmethod
+ def _GetShowParser(cls):
+ """Return a parser for `drbd show` output.
+
+ This will either create or return an already-create parser for the
+ output of the command `drbd show`.
+
+ """
+ if cls._PARSE_SHOW is not None:
+ return cls._PARSE_SHOW
+
+ # pyparsing setup
+ lbrace = pyp.Literal("{").suppress()
+ rbrace = pyp.Literal("}").suppress()
+ semi = pyp.Literal(";").suppress()
+ # this also converts the value to an int
+ number = pyp.Word(pyp.nums).setParseAction(lambda s, l, t: int(t[0]))
+
+ comment = pyp.Literal ("#") + pyp.Optional(pyp.restOfLine)
+ defa = pyp.Literal("_is_default").suppress()
+ dbl_quote = pyp.Literal('"').suppress()
+
+ keyword = pyp.Word(pyp.alphanums + '-')
+
+ # value types
+ value = pyp.Word(pyp.alphanums + '_-/.:')
+ quoted = dbl_quote + pyp.CharsNotIn('"') + dbl_quote
+ addr_port = (pyp.Word(pyp.nums + '.') + pyp.Literal(':').suppress() +
+ number)
+ # meta device, extended syntax
+ meta_value = ((value ^ quoted) + pyp.Literal('[').suppress() +
+ number + pyp.Word(']').suppress())
+
+ # a statement
+ stmt = (~rbrace + keyword + ~lbrace +
+ (addr_port ^ value ^ quoted ^ meta_value) +
+ pyp.Optional(defa) + semi +
+ pyp.Optional(pyp.restOfLine).suppress())
+
+ # an entire section
+ section_name = pyp.Word(pyp.alphas + '_')
+ section = section_name + lbrace + pyp.ZeroOrMore(pyp.Group(stmt)) + rbrace
+
+ bnf = pyp.ZeroOrMore(pyp.Group(section ^ stmt))
+ bnf.ignore(comment)
+
+ cls._PARSE_SHOW = bnf
+
+ return bnf
+
+ @classmethod
+ def _GetShowData(cls, minor):
+ """Return the `drbdsetup show` data for a minor.
+
+ """
+ result = utils.RunCmd(["drbdsetup", cls._DevPath(minor), "show"])
+ if result.failed:
+ logger.Error("Can't display the drbd config: %s" % result.fail_reason)
+ return None
+ return result.stdout
+
+ @classmethod
+ def _GetDevInfo(cls, out):
+ """Parse details about a given DRBD minor.
+
+ This return, if available, the local backing device (as a path)
+ and the local and remote (ip, port) information from a string
+ containing the output of the `drbdsetup show` command as returned
+ by _GetShowData.
+
+ """
+ data = {}
+ if not out:
+ return data
+
+ bnf = cls._GetShowParser()
+ # run pyparse
+
+ try:
+ results = bnf.parseString(out)
+ except pyp.ParseException, err:
+ raise errors.BlockDeviceError("Can't parse drbdsetup show output: %s" %
+ str(err))
+
+ # and massage the results into our desired format
+ for section in results:
+ sname = section[0]
+ if sname == "_this_host":
+ for lst in section[1:]:
+ if lst[0] == "disk":
+ data["local_dev"] = lst[1]
+ elif lst[0] == "meta-disk":
+ data["meta_dev"] = lst[1]
+ data["meta_index"] = lst[2]
+ elif lst[0] == "address":
+ data["local_addr"] = tuple(lst[1:])
+ elif sname == "_remote_host":
+ for lst in section[1:]:
+ if lst[0] == "address":
+ data["remote_addr"] = tuple(lst[1:])
+ return data
+
+ def _MatchesLocal(self, info):
+ """Test if our local config matches with an existing device.
+
+ The parameter should be as returned from `_GetDevInfo()`. This
+ method tests if our local backing device is the same as the one in
+ the info parameter, in effect testing if we look like the given
+ device.
+
+ """
+ if self._children:
+ backend, meta = self._children
+ else:
+ backend = meta = None
+
+ if backend is not None:
+ retval = ("local_dev" in info and info["local_dev"] == backend.dev_path)
+ else:
+ retval = ("local_dev" not in info)
+
+ if meta is not None:
+ retval = retval and ("meta_dev" in info and
+ info["meta_dev"] == meta.dev_path)
+ retval = retval and ("meta_index" in info and
+ info["meta_index"] == 0)
+ else:
+ retval = retval and ("meta_dev" not in info and
+ "meta_index" not in info)
+ return retval
+
+ def _MatchesNet(self, info):
+ """Test if our network config matches with an existing device.
+
+ The parameter should be as returned from `_GetDevInfo()`. This
+ method tests if our network configuration is the same as the one
+ in the info parameter, in effect testing if we look like the given
+ device.
+
+ """
+ if (((self._lhost is None and not ("local_addr" in info)) and
+ (self._rhost is None and not ("remote_addr" in info)))):
+ return True
+
+ if self._lhost is None:
+ return False
+
+ if not ("local_addr" in info and
+ "remote_addr" in info):
+ return False
+
+ retval = (info["local_addr"] == (self._lhost, self._lport))
+ retval = (retval and
+ info["remote_addr"] == (self._rhost, self._rport))
+ return retval
+
+ @classmethod
+ def _AssembleLocal(cls, minor, backend, meta):
+ """Configure the local part of a DRBD device.
+
+ This is the first thing that must be done on an unconfigured DRBD
+ device. And it must be done only once.
+
+ """
+ if not cls._IsValidMeta(meta):
+ return False
+ result = utils.RunCmd(["drbdsetup", cls._DevPath(minor), "disk",
+ backend, meta, "0", "-e", "detach",
+ "--create-device"])
+ if result.failed:
+ logger.Error("Can't attach local disk: %s" % result.output)
+ return not result.failed
+
+ @classmethod
+ def _AssembleNet(cls, minor, net_info, protocol,
+ dual_pri=False, hmac=None, secret=None):
+ """Configure the network part of the device.
+
+ """
+ lhost, lport, rhost, rport = net_info
+ if None in net_info:
+ # we don't want network connection and actually want to make
+ # sure its shutdown
+ return cls._ShutdownNet(minor)
+
+ args = ["drbdsetup", cls._DevPath(minor), "net",
+ "%s:%s" % (lhost, lport), "%s:%s" % (rhost, rport), protocol,
+ "-A", "discard-zero-changes",
+ "-B", "consensus",
+ ]
+ if dual_pri:
+ args.append("-m")
+ if hmac and secret:
+ args.extend(["-a", hmac, "-x", secret])
+ result = utils.RunCmd(args)
+ if result.failed:
+ logger.Error("Can't setup network for dbrd device: %s" %
+ result.fail_reason)
+ return False
+
+ timeout = time.time() + 10
+ ok = False
+ while time.time() < timeout:
+ info = cls._GetDevInfo(cls._GetShowData(minor))
+ if not "local_addr" in info or not "remote_addr" in info:
+ time.sleep(1)
+ continue
+ if (info["local_addr"] != (lhost, lport) or
+ info["remote_addr"] != (rhost, rport)):
+ time.sleep(1)
+ continue
+ ok = True
+ break
+ if not ok:
+ logger.Error("Timeout while configuring network")
+ return False
+ return True
+
+ def AddChildren(self, devices):
+ """Add a disk to the DRBD device.
+
+ """
+ if self.minor is None:
+ raise errors.BlockDeviceError("Can't attach to dbrd8 during AddChildren")
+ if len(devices) != 2:
+ raise errors.BlockDeviceError("Need two devices for AddChildren")
+ info = self._GetDevInfo(self._GetShowData(self.minor))
+ if "local_dev" in info:
+ raise errors.BlockDeviceError("DRBD8 already attached to a local disk")
+ backend, meta = devices
+ if backend.dev_path is None or meta.dev_path is None:
+ raise errors.BlockDeviceError("Children not ready during AddChildren")
+ backend.Open()
+ meta.Open()
+ if not self._CheckMetaSize(meta.dev_path):
+ raise errors.BlockDeviceError("Invalid meta device size")
+ self._InitMeta(self._FindUnusedMinor(), meta.dev_path)
+ if not self._IsValidMeta(meta.dev_path):
+ raise errors.BlockDeviceError("Cannot initalize meta device")
+
+ if not self._AssembleLocal(self.minor, backend.dev_path, meta.dev_path):
+ raise errors.BlockDeviceError("Can't attach to local storage")
+ self._children = devices
+
+ def RemoveChildren(self, devices):
+ """Detach the drbd device from local storage.
+
+ """
+ if self.minor is None:
+ raise errors.BlockDeviceError("Can't attach to drbd8 during"
+ " RemoveChildren")
+ # early return if we don't actually have backing storage
+ info = self._GetDevInfo(self._GetShowData(self.minor))
+ if "local_dev" not in info:
+ return
+ if len(self._children) != 2:
+ raise errors.BlockDeviceError("We don't have two children: %s" %
+ self._children)
+ if self._children.count(None) == 2: # we don't actually have children :)
+ logger.Error("Requested detach while detached")
+ return
+ if len(devices) != 2:
+ raise errors.BlockDeviceError("We need two children in RemoveChildren")
+ for child, dev in zip(self._children, devices):
+ if dev != child.dev_path:
+ raise errors.BlockDeviceError("Mismatch in local storage"
+ " (%s != %s) in RemoveChildren" %
+ (dev, child.dev_path))
+
+ if not self._ShutdownLocal(self.minor):
+ raise errors.BlockDeviceError("Can't detach from local storage")
+ self._children = []
+
+ def SetSyncSpeed(self, kbytes):
+ """Set the speed of the DRBD syncer.
+
+ """
+ children_result = super(DRBD8, self).SetSyncSpeed(kbytes)
+ if self.minor is None:
+ logger.Info("Instance not attached to a device")
+ return False
+ result = utils.RunCmd(["drbdsetup", self.dev_path, "syncer", "-r", "%d" %
+ kbytes])
+ if result.failed:
+ logger.Error("Can't change syncer rate: %s " % result.fail_reason)
+ return not result.failed and children_result
+
+ def GetSyncStatus(self):
+ """Returns the sync status of the device.
+
+ Returns:
+ (sync_percent, estimated_time, is_degraded)
+
+ If sync_percent is None, it means all is ok
+ If estimated_time is None, it means we can't esimate
+ the time needed, otherwise it's the time left in seconds.
+
+
+ We set the is_degraded parameter to True on two conditions:
+ network not connected or local disk missing.
+
+ We compute the ldisk parameter based on wheter we have a local
+ disk or not.
+
+ """
+ if self.minor is None and not self.Attach():
+ raise errors.BlockDeviceError("Can't attach to device in GetSyncStatus")
+ proc_info = self._MassageProcData(self._GetProcData())
+ if self.minor not in proc_info:
+ raise errors.BlockDeviceError("Can't find myself in /proc (minor %d)" %
+ self.minor)
+ line = proc_info[self.minor]
+ match = re.match("^.*sync'ed: *([0-9.]+)%.*"
+ " finish: ([0-9]+):([0-9]+):([0-9]+) .*$", line)
+ if match:
+ sync_percent = float(match.group(1))
+ hours = int(match.group(2))
+ minutes = int(match.group(3))
+ seconds = int(match.group(4))
+ est_time = hours * 3600 + minutes * 60 + seconds
+ else:
+ sync_percent = None
+ est_time = None
+ match = re.match("^ *\d+: cs:(\w+).*ds:(\w+)/(\w+).*$", line)
+ if not match:
+ raise errors.BlockDeviceError("Can't find my data in /proc (minor %d)" %
+ self.minor)
+ client_state = match.group(1)
+ local_disk_state = match.group(2)
+ ldisk = local_disk_state != "UpToDate"
+ is_degraded = client_state != "Connected"
+ return sync_percent, est_time, is_degraded or ldisk, ldisk
+
+ def Open(self, force=False):
+ """Make the local state primary.
+
+ If the 'force' parameter is given, the '--do-what-I-say' parameter
+ is given. Since this is a pottentialy dangerous operation, the
+ force flag should be only given after creation, when it actually
+ has to be given.
+
+ """
+ if self.minor is None and not self.Attach():
+ logger.Error("DRBD cannot attach to a device during open")
+ return False
+ cmd = ["drbdsetup", self.dev_path, "primary"]
+ if force:
+ cmd.append("-o")
+ result = utils.RunCmd(cmd)
+ if result.failed:
+ msg = ("Can't make drbd device primary: %s" % result.output)
+ logger.Error(msg)
+ raise errors.BlockDeviceError(msg)
+
+ def Close(self):
+ """Make the local state secondary.
+
+ This will, of course, fail if the device is in use.
+
+ """
+ if self.minor is None and not self.Attach():
+ logger.Info("Instance not attached to a device")
+ raise errors.BlockDeviceError("Can't find device")
+ result = utils.RunCmd(["drbdsetup", self.dev_path, "secondary"])
+ if result.failed:
+ msg = ("Can't switch drbd device to"
+ " secondary: %s" % result.output)
+ logger.Error(msg)
+ raise errors.BlockDeviceError(msg)
+
+ def Attach(self):
+ """Find a DRBD device which matches our config and attach to it.
+
+ In case of partially attached (local device matches but no network
+ setup), we perform the network attach. If successful, we re-test
+ the attach if can return success.
+
+ """
+ for minor in self._GetUsedDevs():
+ info = self._GetDevInfo(self._GetShowData(minor))
+ match_l = self._MatchesLocal(info)
+ match_r = self._MatchesNet(info)
+ if match_l and match_r:
+ break
+ if match_l and not match_r and "local_addr" not in info:
+ res_r = self._AssembleNet(minor,
+ (self._lhost, self._lport,
+ self._rhost, self._rport),
+ "C")
+ if res_r:
+ if self._MatchesNet(self._GetDevInfo(self._GetShowData(minor))):
+ break
+ # the weakest case: we find something that is only net attached
+ # even though we were passed some children at init time
+ if match_r and "local_dev" not in info:
+ break
+ if match_l and not match_r and "local_addr" in info:
+ # strange case - the device network part points to somewhere
+ # else, even though its local storage is ours; as we own the
+ # drbd space, we try to disconnect from the remote peer and
+ # reconnect to our correct one
+ if not self._ShutdownNet(minor):
+ raise errors.BlockDeviceError("Device has correct local storage,"
+ " wrong remote peer and is unable to"
+ " disconnect in order to attach to"
+ " the correct peer")
+ # note: _AssembleNet also handles the case when we don't want
+ # local storage (i.e. one or more of the _[lr](host|port) is
+ # None)
+ if (self._AssembleNet(minor, (self._lhost, self._lport,
+ self._rhost, self._rport), "C") and
+ self._MatchesNet(self._GetDevInfo(self._GetShowData(minor)))):
+ break
+
+ else:
+ minor = None
+
+ self._SetFromMinor(minor)
+ return minor is not None
+
+ def Assemble(self):
+ """Assemble the drbd.
+
+ Method:
+ - if we have a local backing device, we bind to it by:
+ - checking the list of used drbd devices
+ - check if the local minor use of any of them is our own device
+ - if yes, abort?
+ - if not, bind
+ - if we have a local/remote net info:
+ - redo the local backing device step for the remote device
+ - check if any drbd device is using the local port,
+ if yes abort
+ - check if any remote drbd device is using the remote
+ port, if yes abort (for now)
+ - bind our net port
+ - bind the remote net port
+
+ """
+ self.Attach()
+ if self.minor is not None:
+ logger.Info("Already assembled")
+ return True
+
+ result = super(DRBD8, self).Assemble()
+ if not result:
+ return result
+
+ minor = self._FindUnusedMinor()
+ need_localdev_teardown = False
+ if self._children and self._children[0] and self._children[1]:
+ result = self._AssembleLocal(minor, self._children[0].dev_path,
+ self._children[1].dev_path)
+ if not result:
+ return False
+ need_localdev_teardown = True
+ if self._lhost and self._lport and self._rhost and self._rport:
+ result = self._AssembleNet(minor,
+ (self._lhost, self._lport,
+ self._rhost, self._rport),
+ "C")
+ if not result:
+ if need_localdev_teardown:
+ # we will ignore failures from this
+ logger.Error("net setup failed, tearing down local device")
+ self._ShutdownAll(minor)
+ return False
+ self._SetFromMinor(minor)
+ return True
+
+ @classmethod
+ def _ShutdownLocal(cls, minor):
+ """Detach from the local device.
+
+ I/Os will continue to be served from the remote device. If we
+ don't have a remote device, this operation will fail.
+
+ """
+ result = utils.RunCmd(["drbdsetup", cls._DevPath(minor), "detach"])
+ if result.failed:
+ logger.Error("Can't detach local device: %s" % result.output)
+ return not result.failed
+
+ @classmethod
+ def _ShutdownNet(cls, minor):
+ """Disconnect from the remote peer.
+
+ This fails if we don't have a local device.
+
+ """
+ result = utils.RunCmd(["drbdsetup", cls._DevPath(minor), "disconnect"])
+ if result.failed:
+ logger.Error("Can't shutdown network: %s" % result.output)
+ return not result.failed
+
+ @classmethod
+ def _ShutdownAll(cls, minor):
+ """Deactivate the device.
+
+ This will, of course, fail if the device is in use.
+
+ """
+ result = utils.RunCmd(["drbdsetup", cls._DevPath(minor), "down"])
+ if result.failed:
+ logger.Error("Can't shutdown drbd device: %s" % result.output)
+ return not result.failed
+
+ def Shutdown(self):
+ """Shutdown the DRBD device.
+
+ """
+ if self.minor is None and not self.Attach():
+ logger.Info("DRBD device not attached to a device during Shutdown")
+ return True
+ if not self._ShutdownAll(self.minor):
+ return False
+ self.minor = None
+ self.dev_path = None
+ return True
+
+ def Remove(self):
+ """Stub remove for DRBD devices.
+
+ """
+ return self.Shutdown()
+
+ @classmethod
+ def Create(cls, unique_id, children, size):
+ """Create a new DRBD8 device.
+
+ Since DRBD devices are not created per se, just assembled, this
+ function only initializes the metadata.
+
+ """
+ if len(children) != 2:
+ raise errors.ProgrammerError("Invalid setup for the drbd device")
+ meta = children[1]
+ meta.Assemble()
+ if not meta.Attach():
+ raise errors.BlockDeviceError("Can't attach to meta device")
+ if not cls._CheckMetaSize(meta.dev_path):
+ raise errors.BlockDeviceError("Invalid meta device size")
+ cls._InitMeta(cls._FindUnusedMinor(), meta.dev_path)
+ if not cls._IsValidMeta(meta.dev_path):
+ raise errors.BlockDeviceError("Cannot initalize meta device")
+ return cls(unique_id, children)
+
+
+class FileStorage(BlockDev):
+ """File device.
+
+ This class represents the a file storage backend device.
+
+ The unique_id for the file device is a (file_driver, file_path) tuple.
+
+ """
+ def __init__(self, unique_id, children):
+ """Initalizes a file device backend.
+
+ """
+ if children:
+ raise errors.BlockDeviceError("Invalid setup for file device")
+ super(FileStorage, self).__init__(unique_id, children)
+ if not isinstance(unique_id, (tuple, list)) or len(unique_id) != 2:
+ raise ValueError("Invalid configuration data %s" % str(unique_id))
+ self.driver = unique_id[0]
+ self.dev_path = unique_id[1]
+
+ def Assemble(self):
+ """Assemble the device.
+
+ Checks whether the file device exists, raises BlockDeviceError otherwise.
+
+ """
+ if not os.path.exists(self.dev_path):
+ raise errors.BlockDeviceError("File device '%s' does not exist." %
+ self.dev_path)
+ return True
+
+ def Shutdown(self):
+ """Shutdown the device.
+
+ This is a no-op for the file type, as we don't deacivate
+ the file on shutdown.
+
+ """
+ return True
+
+ def Open(self, force=False):
+ """Make the device ready for I/O.
+
+ This is a no-op for the file type.
+
+ """
+ pass
+
+ def Close(self):
+ """Notifies that the device will no longer be used for I/O.
+
+ This is a no-op for the file type.
+
+ """
+ pass
+
+ def Remove(self):
+ """Remove the file backing the block device.
+
+ Returns:
+ boolean indicating wheter removal of file was successful or not.
+
+ """
+ if not os.path.exists(self.dev_path):
+ return True
+ try:
+ os.remove(self.dev_path)
+ return True
+ except OSError, err:
+ logger.Error("Can't remove file '%s': %s"
+ % (self.dev_path, err))
+ return False
+
+ def Attach(self):
+ """Attach to an existing file.
+
+ Check if this file already exists.
+
+ Returns:
+ boolean indicating if file exists or not.
+
+ """
+ if os.path.exists(self.dev_path):
+ return True
+ return False
+
+ @classmethod
+ def Create(cls, unique_id, children, size):
+ """Create a new file.
+
+ Args:
+ children:
+ size: integer size of file in MiB
+
+ Returns:
+ A ganeti.bdev.FileStorage object.
+
+ """
+ if not isinstance(unique_id, (tuple, list)) or len(unique_id) != 2:
+ raise ValueError("Invalid configuration data %s" % str(unique_id))
+ dev_path = unique_id[1]
+ try:
+ f = open(dev_path, 'w')
+ except IOError, err:
+ raise BlockDeviceError("Could not create '%'" % err)
+ else:
+ f.truncate(size * 1024 * 1024)
+ f.close()
+
+ return FileStorage(unique_id, children)
+
+
+DEV_MAP = {
+ constants.LD_LV: LogicalVolume,
+ constants.LD_MD_R1: MDRaid1,
+ constants.LD_DRBD7: DRBDev,
+ constants.LD_DRBD8: DRBD8,
+ constants.LD_FILE: FileStorage,
+ }
+
+
+def FindDevice(dev_type, unique_id, children):
+ """Search for an existing, assembled device.
+
+ This will succeed only if the device exists and is assembled, but it
+ does not do any actions in order to activate the device.
+
+ """
+ if dev_type not in DEV_MAP:
+ raise errors.ProgrammerError("Invalid block device type '%s'" % dev_type)
+ device = DEV_MAP[dev_type](unique_id, children)
+ if not device.Attach():
+ return None
+ return device
+
+
+def AttachOrAssemble(dev_type, unique_id, children):
+ """Try to attach or assemble an existing device.
+
+ This will attach to an existing assembled device or will assemble
+ the device, as needed, to bring it fully up.
+
+ """
+ if dev_type not in DEV_MAP:
+ raise errors.ProgrammerError("Invalid block device type '%s'" % dev_type)
+ device = DEV_MAP[dev_type](unique_id, children)
+ if not device.Attach():
+ device.Assemble()
+ if not device.Attach():
+ raise errors.BlockDeviceError("Can't find a valid block device for"
+ " %s/%s/%s" %
+ (dev_type, unique_id, children))