HTTP_CONTENT_LENGTH = "Content-Length"
HTTP_CONNECTION = "Connection"
HTTP_KEEP_ALIVE = "Keep-Alive"
+HTTP_WWW_AUTHENTICATE = "WWW-Authenticate"
+HTTP_AUTHORIZATION = "Authorization"
+HTTP_AUTHENTICATION_INFO = "Authentication-Info"
+HTTP_ALLOW = "Allow"
_SSL_UNEXPECTED_EOF = "Unexpected EOF"
class HttpBadRequest(HttpException):
+ """400 Bad Request
+
+ RFC2616, 10.4.1: The request could not be understood by the server
+ due to malformed syntax. The client SHOULD NOT repeat the request
+ without modifications.
+
+ """
code = 400
+class HttpUnauthorized(HttpException):
+ """401 Unauthorized
+
+ RFC2616, section 10.4.2: The request requires user
+ authentication. The response MUST include a WWW-Authenticate header
+ field (section 14.47) containing a challenge applicable to the
+ requested resource.
+
+ """
+ code = 401
+
+
class HttpForbidden(HttpException):
+ """403 Forbidden
+
+ RFC2616, 10.4.4: The server understood the request, but is refusing
+ to fulfill it. Authorization will not help and the request SHOULD
+ NOT be repeated.
+
+ """
code = 403
class HttpNotFound(HttpException):
+ """404 Not Found
+
+ RFC2616, 10.4.5: The server has not found anything matching the
+ Request-URI. No indication is given of whether the condition is
+ temporary or permanent.
+
+ """
code = 404
+class HttpMethodNotAllowed(HttpException):
+ """405 Method Not Allowed
+
+ RFC2616, 10.4.6: The method specified in the Request-Line is not
+ allowed for the resource identified by the Request-URI. The response
+ MUST include an Allow header containing a list of valid methods for
+ the requested resource.
+
+ """
+ code = 405
+
+
+class HttpRequestTimeout(HttpException):
+ """408 Request Timeout
+
+ RFC2616, 10.4.9: The client did not produce a request within the
+ time that the server was prepared to wait. The client MAY repeat the
+ request without modifications at any later time.
+
+ """
+ code = 408
+
+
+class HttpConflict(HttpException):
+ """409 Conflict
+
+ RFC2616, 10.4.10: The request could not be completed due to a
+ conflict with the current state of the resource. This code is only
+ allowed in situations where it is expected that the user might be
+ able to resolve the conflict and resubmit the request.
+
+ """
+ code = 409
+
+
class HttpGone(HttpException):
+ """410 Gone
+
+ RFC2616, 10.4.11: The requested resource is no longer available at
+ the server and no forwarding address is known. This condition is
+ expected to be considered permanent.
+
+ """
code = 410
class HttpLengthRequired(HttpException):
+ """411 Length Required
+
+ RFC2616, 10.4.12: The server refuses to accept the request without a
+ defined Content-Length. The client MAY repeat the request if it adds
+ a valid Content-Length header field containing the length of the
+ message-body in the request message.
+
+ """
code = 411
-class HttpInternalError(HttpException):
+class HttpPreconditionFailed(HttpException):
+ """412 Precondition Failed
+
+ RFC2616, 10.4.13: The precondition given in one or more of the
+ request-header fields evaluated to false when it was tested on the
+ server.
+
+ """
+ code = 412
+
+
+class HttpInternalServerError(HttpException):
+ """500 Internal Server Error
+
+ RFC2616, 10.5.1: The server encountered an unexpected condition
+ which prevented it from fulfilling the request.
+
+ """
code = 500
class HttpNotImplemented(HttpException):
+ """501 Not Implemented
+
+ RFC2616, 10.5.2: The server does not support the functionality
+ required to fulfill the request.
+
+ """
code = 501
+class HttpBadGateway(HttpException):
+ """502 Bad Gateway
+
+ RFC2616, 10.5.3: The server, while acting as a gateway or proxy,
+ received an invalid response from the upstream server it accessed in
+ attempting to fulfill the request.
+
+ """
+ code = 502
+
+
class HttpServiceUnavailable(HttpException):
+ """503 Service Unavailable
+
+ RFC2616, 10.5.4: The server is currently unable to handle the
+ request due to a temporary overloading or maintenance of the server.
+
+ """
code = 503
+class HttpGatewayTimeout(HttpException):
+ """504 Gateway Timeout
+
+ RFC2616, 10.5.5: The server, while acting as a gateway or proxy, did
+ not receive a timely response from the upstream server specified by
+ the URI (e.g. HTTP, FTP, LDAP) or some other auxiliary server
+ (e.g. DNS) it needed to access in attempting to complete the
+ request.
+
+ """
+ code = 504
+
+
class HttpVersionNotSupported(HttpException):
+ """505 HTTP Version Not Supported
+
+ RFC2616, 10.5.6: The server does not support, or refuses to support,
+ the HTTP protocol version that was used in the request message.
+
+ """
code = 505
return serializer.LoadJson(data)
-def WaitForSocketCondition(poller, sock, event, timeout):
+def WaitForSocketCondition(sock, event, timeout):
"""Waits for a condition to occur on the socket.
- @type poller: select.Poller
- @param poller: Poller object as created by select.poll()
@type sock: socket
@param sock: Wait for events on this socket
@type event: int
# Poller object expects milliseconds
timeout *= 1000
+ poller = select.poll()
poller.register(sock, event)
try:
while True:
poller.unregister(sock)
-def SocketOperation(poller, sock, op, arg1, timeout):
+def SocketOperation(sock, op, arg1, timeout):
"""Wrapper around socket functions.
This function abstracts error handling for socket operations, especially
for the complicated interaction with OpenSSL.
- @type poller: select.Poller
- @param poller: Poller object as created by select.poll()
@type sock: socket
@param sock: Socket for the operation
@type op: int
else:
wait_for_event = event_poll
- event = WaitForSocketCondition(poller, sock, wait_for_event, timeout)
+ event = WaitForSocketCondition(sock, wait_for_event, timeout)
if event is None:
raise HttpSocketTimeout()
raise
-def ShutdownConnection(poller, sock, close_timeout, write_timeout, msgreader,
- force):
+def ShutdownConnection(sock, close_timeout, write_timeout, msgreader, force):
"""Closes the connection.
- @type poller: select.Poller
- @param poller: Poller object as created by select.poll()
@type sock: socket
@param sock: Socket to be shut down
@type close_timeout: float
- @param close_timeout: How long to wait for the peer to close the connection
+ @param close_timeout: How long to wait for the peer to close
+ the connection
@type write_timeout: float
@param write_timeout: Write timeout for shutdown
@type msgreader: http.HttpMessageReader
- @param msgreader: Request message reader, used to determine whether peer
- should close connection
+ @param msgreader: Request message reader, used to determine whether
+ peer should close connection
@type force: bool
- @param force: Whether to forcibly close the connection without waiting
- for peer
+ @param force: Whether to forcibly close the connection without
+ waiting for peer
"""
- poller = select.poll()
-
#print msgreader.peer_will_close, force
if msgreader and msgreader.peer_will_close and not force:
# Wait for peer to close
try:
# Check whether it's actually closed
- if not SocketOperation(poller, sock, SOCKOP_RECV, 1, close_timeout):
+ if not SocketOperation(sock, SOCKOP_RECV, 1, close_timeout):
return
except (socket.error, HttpError, HttpSocketTimeout):
# Ignore errors at this stage
# Close the connection from our side
try:
# We don't care about the return value, see NOTES in SSL_shutdown(3).
- SocketOperation(poller, sock, SOCKOP_SHUTDOWN, socket.SHUT_RDWR,
+ SocketOperation(sock, SOCKOP_SHUTDOWN, socket.SHUT_RDWR,
write_timeout)
except HttpSocketTimeout:
raise HttpError("Timeout while shutting down connection")
except socket.error, err:
- raise HttpError("Error while shutting down connection: %s" % err)
+ # Ignore ENOTCONN
+ if not (err.args and err.args[0] == errno.ENOTCONN):
+ raise HttpError("Error while shutting down connection: %s" % err)
-def Handshake(poller, sock, write_timeout):
+def Handshake(sock, write_timeout):
"""Shakes peer's hands.
- @type poller: select.Poller
- @param poller: Poller object as created by select.poll()
@type sock: socket
@param sock: Socket to be shut down
@type write_timeout: float
"""
try:
- return SocketOperation(poller, sock, SOCKOP_HANDSHAKE, None, write_timeout)
+ return SocketOperation(sock, SOCKOP_HANDSHAKE, None, write_timeout)
except HttpSocketTimeout:
raise HttpError("Timeout during SSL handshake")
except socket.error, err:
@type ssl_key_path: string
@param ssl_key_path: Path to file containing SSL key in PEM format
@type ssl_cert_path: string
- @param ssl_cert_path: Path to file containing SSL certificate in PEM format
+ @param ssl_cert_path: Path to file containing SSL certificate
+ in PEM format
"""
self.ssl_key_pem = utils.ReadFile(ssl_key_path)
@type ssl_params: HttpSslParams
@param ssl_params: SSL key and certificate
@type ssl_verify_peer: bool
- @param ssl_verify_peer: Whether to require client certificate and compare
- it with our certificate
+ @param ssl_verify_peer: Whether to require client certificate
+ and compare it with our certificate
"""
self._ssl_params = ssl_params
buf = self._FormatMessage()
- poller = select.poll()
-
pos = 0
end = len(buf)
while pos < end:
# Send only SOCK_BUF_SIZE bytes at a time
data = buf[pos:(pos + SOCK_BUF_SIZE)]
- sent = SocketOperation(poller, sock, SOCKOP_SEND, data,
- write_timeout)
+ sent = SocketOperation(sock, SOCKOP_SEND, data, write_timeout)
# Remove sent bytes
pos += sent
self.sock = sock
self.msg = msg
- self.poller = select.poll()
self.start_line_buffer = None
self.header_buffer = StringIO()
self.body_buffer = StringIO()
while self.parser_status != self.PS_COMPLETE:
# TODO: Don't read more than necessary (Content-Length), otherwise
# data might be lost and/or an error could occur
- data = SocketOperation(self.poller, sock, SOCKOP_RECV, SOCK_BUF_SIZE,
- read_timeout)
+ data = SocketOperation(sock, SOCKOP_RECV, SOCK_BUF_SIZE, read_timeout)
if data:
buf += data
This function also adjusts internal variables based on header values.
- RFC2616, section 4.3: "The presence of a message-body in a request is
+ RFC2616, section 4.3: The presence of a message-body in a request is
signaled by the inclusion of a Content-Length or Transfer-Encoding header
- field in the request's message-headers."
+ field in the request's message-headers.
"""
# Parse headers