- if not match:
- continue
- minor = int(match.group(1))
- state = match.group(2)
- if state == cls._ST_UNCONFIGURED:
- continue
- used_devs[minor] = state, line
-
- return used_devs
-
- def _SetFromMinor(self, minor):
- """Set our parameters based on the given minor.
-
- This sets our minor variable and our dev_path.
-
- """
- if minor is None:
- self.minor = self.dev_path = None
- else:
- self.minor = minor
- self.dev_path = self._DevPath(minor)
-
- @staticmethod
- def _CheckMetaSize(meta_device):
- """Check if the given meta device looks like a valid one.
-
- This currently only check the size, which must be around
- 128MiB.
-
- """
- result = utils.RunCmd(["blockdev", "--getsize", meta_device])
- if result.failed:
- logger.Error("Failed to get device size: %s" % result.fail_reason)
- return False
- try:
- sectors = int(result.stdout)
- except ValueError:
- logger.Error("Invalid output from blockdev: '%s'" % result.stdout)
- return False
- bytes = sectors * 512
- if bytes < 128 * 1024 * 1024: # less than 128MiB
- logger.Error("Meta device too small (%.2fMib)" % (bytes / 1024 / 1024))
- return False
- if bytes > (128 + 32) * 1024 * 1024: # account for an extra (big) PE on LVM
- logger.Error("Meta device too big (%.2fMiB)" % (bytes / 1024 / 1024))
- return False
- return True
-
- def Rename(self, new_id):
- """Rename a device.
-
- This is not supported for drbd devices.
-
- """
- raise errors.ProgrammerError("Can't rename a drbd device")
-
-
-class DRBDev(BaseDRBD):
- """DRBD block device.
-
- This implements the local host part of the DRBD device, i.e. it
- doesn't do anything to the supposed peer. If you need a fully
- connected DRBD pair, you need to use this class on both hosts.
-
- The unique_id for the drbd device is the (local_ip, local_port,
- remote_ip, remote_port) tuple, and it must have two children: the
- data device and the meta_device. The meta device is checked for
- valid size and is zeroed on create.
-
- """
- def __init__(self, unique_id, children):
- super(DRBDev, self).__init__(unique_id, children)
- self.major = self._DRBD_MAJOR
- [kmaj, kmin, kfix, api, proto] = self._GetVersion()
- if kmaj != 0 and kmin != 7:
- raise errors.BlockDeviceError("Mismatch in DRBD kernel version and"
- " requested ganeti usage: kernel is"
- " %s.%s, ganeti wants 0.7" % (kmaj, kmin))
-
- if len(children) != 2:
- raise ValueError("Invalid configuration data %s" % str(children))
- if not isinstance(unique_id, (tuple, list)) or len(unique_id) != 4:
- raise ValueError("Invalid configuration data %s" % str(unique_id))
- self._lhost, self._lport, self._rhost, self._rport = unique_id
- self.Attach()
-
- @classmethod
- def _FindUnusedMinor(cls):
- """Find an unused DRBD device.
-
- """
- data = cls._GetProcData()
-
- valid_line = re.compile("^ *([0-9]+): cs:Unconfigured$")
- for line in data:
- match = valid_line.match(line)
- if match:
- return int(match.group(1))
- logger.Error("Error: no free drbd minors!")
- raise errors.BlockDeviceError("Can't find a free DRBD minor")
-
- @classmethod
- def _GetDevInfo(cls, minor):
- """Get details about a given DRBD minor.
-
- This return, if available, the local backing device in (major,
- minor) formant and the local and remote (ip, port) information.
-
- """
- data = {}
- result = utils.RunCmd(["drbdsetup", cls._DevPath(minor), "show"])
- if result.failed:
- logger.Error("Can't display the drbd config: %s" % result.fail_reason)
- return data
- out = result.stdout
- if out == "Not configured\n":
- return data
- for line in out.splitlines():
- if "local_dev" not in data:
- match = re.match("^Lower device: ([0-9]+):([0-9]+) .*$", line)
- if match:
- data["local_dev"] = (int(match.group(1)), int(match.group(2)))
- continue
- if "meta_dev" not in data:
- match = re.match("^Meta device: (([0-9]+):([0-9]+)|internal).*$", line)
- if match:
- if match.group(2) is not None and match.group(3) is not None:
- # matched on the major/minor
- data["meta_dev"] = (int(match.group(2)), int(match.group(3)))
- else:
- # matched on the "internal" string
- data["meta_dev"] = match.group(1)
- # in this case, no meta_index is in the output
- data["meta_index"] = -1
- continue
- if "meta_index" not in data:
- match = re.match("^Meta index: ([0-9]+).*$", line)
- if match:
- data["meta_index"] = int(match.group(1))
- continue
- if "local_addr" not in data:
- match = re.match("^Local address: ([0-9.]+):([0-9]+)$", line)
- if match:
- data["local_addr"] = (match.group(1), int(match.group(2)))
- continue
- if "remote_addr" not in data:
- match = re.match("^Remote address: ([0-9.]+):([0-9]+)$", line)
- if match:
- data["remote_addr"] = (match.group(1), int(match.group(2)))
- continue
- return data
-
-
- def _MatchesLocal(self, info):
- """Test if our local config matches with an existing device.
-
- The parameter should be as returned from `_GetDevInfo()`. This
- method tests if our local backing device is the same as the one in
- the info parameter, in effect testing if we look like the given
- device.
-
- """
- if not ("local_dev" in info and "meta_dev" in info and
- "meta_index" in info):
- return False
-
- backend = self._children[0]
- if backend is not None:
- retval = (info["local_dev"] == (backend.major, backend.minor))
- else:
- retval = (info["local_dev"] == (0, 0))
- meta = self._children[1]
- if meta is not None:
- retval = retval and (info["meta_dev"] == (meta.major, meta.minor))
- retval = retval and (info["meta_index"] == 0)
- else:
- retval = retval and (info["meta_dev"] == "internal" and
- info["meta_index"] == -1)
- return retval
-
-
- def _MatchesNet(self, info):
- """Test if our network config matches with an existing device.
-
- The parameter should be as returned from `_GetDevInfo()`. This
- method tests if our network configuration is the same as the one
- in the info parameter, in effect testing if we look like the given
- device.
-
- """
- if (((self._lhost is None and not ("local_addr" in info)) and
- (self._rhost is None and not ("remote_addr" in info)))):
- return True
-
- if self._lhost is None:
- return False
-
- if not ("local_addr" in info and
- "remote_addr" in info):
- return False
-
- retval = (info["local_addr"] == (self._lhost, self._lport))
- retval = (retval and
- info["remote_addr"] == (self._rhost, self._rport))
- return retval
-
-
- @classmethod
- def _AssembleLocal(cls, minor, backend, meta):
- """Configure the local part of a DRBD device.
-
- This is the first thing that must be done on an unconfigured DRBD
- device. And it must be done only once.
-
- """
- if not cls._CheckMetaSize(meta):
- return False
- result = utils.RunCmd(["drbdsetup", cls._DevPath(minor), "disk",
- backend, meta, "0", "-e", "detach"])
- if result.failed:
- logger.Error("Can't attach local disk: %s" % result.output)
- return not result.failed
-
-
- @classmethod
- def _ShutdownLocal(cls, minor):
- """Detach from the local device.
-
- I/Os will continue to be served from the remote device. If we
- don't have a remote device, this operation will fail.
-
- """
- result = utils.RunCmd(["drbdsetup", cls._DevPath(minor), "detach"])
- if result.failed:
- logger.Error("Can't detach local device: %s" % result.output)
- return not result.failed
-
-
- @staticmethod
- def _ShutdownAll(minor):
- """Deactivate the device.
-
- This will, of course, fail if the device is in use.
-
- """
- result = utils.RunCmd(["drbdsetup", DRBDev._DevPath(minor), "down"])
- if result.failed:
- logger.Error("Can't shutdown drbd device: %s" % result.output)
- return not result.failed
-
-
- @classmethod
- def _AssembleNet(cls, minor, net_info, protocol):
- """Configure the network part of the device.
-
- This operation can be, in theory, done multiple times, but there
- have been cases (in lab testing) in which the network part of the
- device had become stuck and couldn't be shut down because activity
- from the new peer (also stuck) triggered a timer re-init and
- needed remote peer interface shutdown in order to clear. So please
- don't change online the net config.
-
- """
- lhost, lport, rhost, rport = net_info
- result = utils.RunCmd(["drbdsetup", cls._DevPath(minor), "net",
- "%s:%s" % (lhost, lport), "%s:%s" % (rhost, rport),
- protocol])
- if result.failed:
- logger.Error("Can't setup network for dbrd device: %s" %
- result.fail_reason)
- return False
-
- timeout = time.time() + 10
- ok = False
- while time.time() < timeout:
- info = cls._GetDevInfo(minor)
- if not "local_addr" in info or not "remote_addr" in info:
- time.sleep(1)
- continue
- if (info["local_addr"] != (lhost, lport) or
- info["remote_addr"] != (rhost, rport)):
- time.sleep(1)
- continue
- ok = True
- break
- if not ok:
- logger.Error("Timeout while configuring network")
- return False
- return True
-
-
- @classmethod
- def _ShutdownNet(cls, minor):
- """Disconnect from the remote peer.
-
- This fails if we don't have a local device.
-
- """
- result = utils.RunCmd(["drbdsetup", cls._DevPath(minor), "disconnect"])
- logger.Error("Can't shutdown network: %s" % result.output)
- return not result.failed
-
-
- def Assemble(self):
- """Assemble the drbd.
-
- Method:
- - if we have a local backing device, we bind to it by:
- - checking the list of used drbd devices
- - check if the local minor use of any of them is our own device
- - if yes, abort?
- - if not, bind
- - if we have a local/remote net info:
- - redo the local backing device step for the remote device
- - check if any drbd device is using the local port,
- if yes abort
- - check if any remote drbd device is using the remote
- port, if yes abort (for now)
- - bind our net port
- - bind the remote net port
-
- """
- self.Attach()
- if self.minor is not None:
- logger.Info("Already assembled")
- return True
-
- result = super(DRBDev, self).Assemble()
- if not result:
- return result
-
- minor = self._FindUnusedMinor()
- need_localdev_teardown = False
- if self._children[0]:
- result = self._AssembleLocal(minor, self._children[0].dev_path,
- self._children[1].dev_path)
- if not result:
- return False
- need_localdev_teardown = True
- if self._lhost and self._lport and self._rhost and self._rport:
- result = self._AssembleNet(minor,
- (self._lhost, self._lport,
- self._rhost, self._rport),
- "C")
- if not result:
- if need_localdev_teardown:
- # we will ignore failures from this
- logger.Error("net setup failed, tearing down local device")
- self._ShutdownAll(minor)
- return False
- self._SetFromMinor(minor)
- return True
-
-
- def Shutdown(self):
- """Shutdown the DRBD device.
-
- """
- if self.minor is None and not self.Attach():
- logger.Info("DRBD device not attached to a device during Shutdown")
- return True
- if not self._ShutdownAll(self.minor):
- return False
- self.minor = None
- self.dev_path = None
- return True
-
-
- def Attach(self):
- """Find a DRBD device which matches our config and attach to it.
-
- In case of partially attached (local device matches but no network
- setup), we perform the network attach. If successful, we re-test
- the attach if can return success.
-
- """
- for minor in self._GetUsedDevs():
- info = self._GetDevInfo(minor)
- match_l = self._MatchesLocal(info)
- match_r = self._MatchesNet(info)
- if match_l and match_r:
- break
- if match_l and not match_r and "local_addr" not in info:
- res_r = self._AssembleNet(minor,
- (self._lhost, self._lport,
- self._rhost, self._rport),
- "C")
- if res_r and self._MatchesNet(self._GetDevInfo(minor)):
- break
- else:
- minor = None
-
- self._SetFromMinor(minor)
- return minor is not None
-
-
- def Open(self, force=False):
- """Make the local state primary.
-
- If the 'force' parameter is given, the '--do-what-I-say' parameter
- is given. Since this is a pottentialy dangerous operation, the
- force flag should be only given after creation, when it actually
- has to be given.
-
- """
- if self.minor is None and not self.Attach():
- logger.Error("DRBD cannot attach to a device during open")
- return False
- cmd = ["drbdsetup", self.dev_path, "primary"]
- if force:
- cmd.append("--do-what-I-say")
- result = utils.RunCmd(cmd)
- if result.failed:
- logger.Error("Can't make drbd device primary: %s" % result.output)
- return False
- return True
-
-
- def Close(self):
- """Make the local state secondary.
-
- This will, of course, fail if the device is in use.
-
- """
- if self.minor is None and not self.Attach():
- logger.Info("Instance not attached to a device")
- raise errors.BlockDeviceError("Can't find device")
- result = utils.RunCmd(["drbdsetup", self.dev_path, "secondary"])
- if result.failed:
- logger.Error("Can't switch drbd device to secondary: %s" % result.output)
- raise errors.BlockDeviceError("Can't switch drbd device to secondary")
-
-
- def SetSyncSpeed(self, kbytes):
- """Set the speed of the DRBD syncer.
-
- """
- children_result = super(DRBDev, self).SetSyncSpeed(kbytes)
- if self.minor is None:
- logger.Info("Instance not attached to a device")
- return False
- result = utils.RunCmd(["drbdsetup", self.dev_path, "syncer", "-r", "%d" %
- kbytes])
- if result.failed:
- logger.Error("Can't change syncer rate: %s " % result.fail_reason)
- return not result.failed and children_result
-
-
- def GetSyncStatus(self):
- """Returns the sync status of the device.
-
- Returns:
- (sync_percent, estimated_time)
-
- If sync_percent is None, it means all is ok
- If estimated_time is None, it means we can't esimate
- the time needed, otherwise it's the time left in seconds
-
- """
- if self.minor is None and not self.Attach():
- raise errors.BlockDeviceError("Can't attach to device in GetSyncStatus")
- proc_info = self._MassageProcData(self._GetProcData())
- if self.minor not in proc_info:
- raise errors.BlockDeviceError("Can't find myself in /proc (minor %d)" %
- self.minor)
- line = proc_info[self.minor]
- match = re.match("^.*sync'ed: *([0-9.]+)%.*"
- " finish: ([0-9]+):([0-9]+):([0-9]+) .*$", line)
- if match:
- sync_percent = float(match.group(1))
- hours = int(match.group(2))
- minutes = int(match.group(3))
- seconds = int(match.group(4))
- est_time = hours * 3600 + minutes * 60 + seconds
- else:
- sync_percent = None
- est_time = None
- match = re.match("^ *[0-9]+: cs:([^ ]+).*$", line)
- if not match:
- raise errors.BlockDeviceError("Can't find my data in /proc (minor %d)" %
- self.minor)
- client_state = match.group(1)
- is_degraded = client_state != "Connected"
- return sync_percent, est_time, is_degraded
-
-