^^^
| **add**
-| {-t|--disk-template {diskless | file \| plain \| drbd}}
-| {--disk=*N*: {size=*VAL* \| adopt=*LV*}[,vg=*VG*][,metavg=*VG*][,mode=*ro\|rw*]
-| \| {-s|--os-size} *SIZE*}
-| [--no-ip-check] [--no-name-check] [--no-start] [--no-install]
-| [--net=*N* [:options...] \| --no-nics]
-| [{-B|--backend-parameters} *BEPARAMS*]
-| [{-H|--hypervisor-parameters} *HYPERVISOR* [: option=*value*... ]]
-| [{-O|--os-parameters} *param*=*value*... ]
-| [--file-storage-dir *dir\_path*] [--file-driver {loop \| blktap}]
-| {{-n|--node} *node[:secondary-node]* \| {-I|--iallocator} *name*}
-| {{-o|--os-type} *os-type*}
-| [--submit]
+| {-t|\--disk-template {diskless | file \| plain \| drbd \| rbd}}
+| {\--disk=*N*: {size=*VAL* \| adopt=*LV*}[,vg=*VG*][,metavg=*VG*][,mode=*ro\|rw*]
+| \| {size=*VAL*,provider=*PROVIDER*}[,param=*value*... ][,mode=*ro\|rw*]
+| \| {-s|\--os-size} *SIZE*}
+| [\--no-ip-check] [\--no-name-check] [\--no-start] [\--no-install]
+| [\--net=*N* [:options...] \| \--no-nics]
+| [{-B|\--backend-parameters} *BEPARAMS*]
+| [{-H|\--hypervisor-parameters} *HYPERVISOR* [: option=*value*... ]]
+| [{-O|\--os-parameters} *param*=*value*... ]
+| [\--file-storage-dir *dir\_path*] [\--file-driver {loop \| blktap}]
+| {{-n|\--node} *node[:secondary-node]* \| {-I|\--iallocator} *name*}
+| {{-o|\--os-type} *os-type*}
+| [\--submit]
+| [\--ignore-ipolicy]
| {*instance*}
Creates a new instance on the specified host. The *instance* argument
instance. The numbering of disks starts at zero, and at least one disk
needs to be passed. For each disk, either the size or the adoption
source needs to be given, and optionally the access mode (read-only or
-the default of read-write) and the LVM volume group can also be
-specified (via the ``vg`` key). For DRBD devices, a different VG can
-be specified for the metadata device using the ``metavg`` key. The
-size is interpreted (when no unit is given) in mebibytes. You can also
-use one of the suffixes *m*, *g* or *t* to specify the exact the units
-used; these suffixes map to mebibytes, gibibytes and tebibytes.
+the default of read-write). The size is interpreted (when no unit is
+given) in mebibytes. You can also use one of the suffixes *m*, *g* or
+*t* to specify the exact the units used; these suffixes map to
+mebibytes, gibibytes and tebibytes. For LVM and DRBD devices, the LVM
+volume group can also be specified (via the ``vg`` key). For DRBD
+devices, a different VG can be specified for the metadata device using
+the ``metavg`` key. For ExtStorage devices, also the ``provider``
+option is mandatory, to specify which ExtStorage provider to use.
+
+When creating ExtStorage disks, also arbitrary parameters can be passed,
+to the ExtStorage provider. Those parameters are passed as additional
+comma separated options. Therefore, an ExtStorage disk provided by
+provider ``pvdr1`` with parameters ``param1``, ``param2`` would be
+passed as ``--disk 0:size=10G,provider=pvdr1,param1=val1,param2=val2``.
When using the ``adopt`` key in the disk definition, Ganeti will
reuse those volumes (instead of creating new ones) as the
instance's disks. Ganeti will rename these volumes to the standard
format, and (without installing the OS) will use them as-is for the
instance. This allows migrating instances from non-managed mode
-(e.q. plain KVM with LVM) to being managed via Ganeti. Note that
+(e.g. plain KVM with LVM) to being managed via Ganeti. Please note that
this works only for the \`plain' disk template (see below for
template details).
can be specified as ``--disk 0:size=20G --disk 1:size=4G --disk
2:size=100G``.
+The minimum information needed to specify an ExtStorage disk are the
+``size`` and the ``provider``. For example:
+``--disk 0:size=20G,provider=pvdr1``.
+
The ``--no-ip-check`` skips the checks that are done to see if the
instance's IP is not already alive (i.e. reachable from the master
node).
Since the name check is used to compute the IP address, if you pass
this option you must also pass the ``--no-ip-check`` option.
-If you don't wat the instance to automatically start after
+If you don't want the instance to automatically start after
creation, this is possible via the ``--no-start`` option. This will
leave the instance down until a subsequent **gnt-instance start**
command.
The NICs of the instances can be specified via the ``--net``
option. By default, one NIC is created for the instance, with a
-random MAC, and set up according the the cluster level nic
+random MAC, and set up according the the cluster level NIC
parameters. Each NIC can take these parameters (all optional):
mac
the node expects the instance to use)
mode
- specifies the connection mode for this nic: routed or bridged.
+ specifies the connection mode for this NIC: routed, bridged or
+ openvswitch.
link
- in bridged mode specifies the bridge to attach this NIC to, in
- routed mode it's intended to differentiate between different
- routing tables/instance groups (but the meaning is dependent on
- the network script, see gnt-cluster(8) for more details)
-
-
-Of these "mode" and "link" are nic parameters, and inherit their
+ in bridged or openvswitch mode specifies the interface to attach
+ this NIC to, in routed mode it's intended to differentiate between
+ different routing tables/instance groups (but the meaning is
+ dependent on the network script, see **gnt-cluster**\(8) for more
+ details). Note that openvswitch support is also hypervisor
+ dependent.
+
+network
+ derives the mode and the link from the settings of the network
+ which is identified by its name. If the network option is chosen,
+ link and mode must not be specified. Note that the mode and link
+ depend on the network-to-nodegroup connection, thus allowing
+ different nodegroups to be connected to the same network in
+ different ways.
+
+
+Of these "mode" and "link" are NIC parameters, and inherit their
default at cluster level. Alternatively, if no network is desired for
the instance, you can prevent the default of one NIC with the
``--no-nics`` option.
parameters for the instance. If no such parameters are specified, the
values are inherited from the cluster. Possible parameters are:
-memory
- the memory size of the instance; as usual, suffixes can be used to
- denote the unit, otherwise the value is taken in mebibites
+maxmem
+ the maximum memory size of the instance; as usual, suffixes can be
+ used to denote the unit, otherwise the value is taken in mebibytes
+
+minmem
+ the minimum memory size of the instance; as usual, suffixes can be
+ used to denote the unit, otherwise the value is taken in mebibytes
vcpus
the number of VCPUs to assign to the instance (if this value makes
whether the instance is considered in the N+1 cluster checks
(enough redundancy in the cluster to survive a node failure)
+always\_failover
+ ``True`` or ``False``, whether the instance must be failed over
+ (shut down and rebooted) always or it may be migrated (briefly
+ suspended)
+
+Note that before 2.6 Ganeti had a ``memory`` parameter, which was the
+only value of memory an instance could have. With the
+``maxmem``/``minmem`` change Ganeti guarantees that at least the minimum
+memory is always available for an instance, but allows more memory to be
+used (up to the maximum memory) should it be free.
The ``-H (--hypervisor-parameters)`` option specified the hypervisor
to use for the instance (must be one of the enabled hypervisors on the
n
network boot (PXE)
- The default is not to set an HVM boot order which is interpreted
+ The default is not to set an HVM boot order, which is interpreted
as 'dc'.
For KVM the boot order is either "floppy", "cdrom", "disk" or
- "network". Please note that older versions of KVM couldn't
- netboot from virtio interfaces. This has been fixed in more recent
- versions and is confirmed to work at least with qemu-kvm 0.11.1.
+ "network". Please note that older versions of KVM couldn't netboot
+ from virtio interfaces. This has been fixed in more recent versions
+ and is confirmed to work at least with qemu-kvm 0.11.1. Also note
+ that if you have set the ``kernel_path`` option, that will be used
+ for booting, and this setting will be silently ignored.
blockdev\_prefix
Valid for the Xen HVM and PVM hypervisors.
- Relevant to nonpvops guest kernels, in which the disk device names
- are given by the host. Allows to specify 'xvd', which helps run
+ Relevant to non-pvops guest kernels, in which the disk device names
+ are given by the host. Allows one to specify 'xvd', which helps run
Red Hat based installers, driven by anaconda.
floppy\_image\_path
This parameter determines the way the cdroms disks are presented
to the instance. The default behavior is to get the same value of
- the eariler parameter (disk_type). The possible options are:
+ the earlier parameter (disk_type). The possible options are:
- paravirtual
- ide
vnc\_x509\_verify
Valid for the KVM hypervisor.
+spice\_bind
+ Valid for the KVM hypervisor.
+
+ Specifies the address or interface on which the SPICE server will
+ listen. Valid values are:
+
+ - IPv4 addresses, including 0.0.0.0 and 127.0.0.1
+ - IPv6 addresses, including :: and ::1
+ - names of network interfaces
+
+ If a network interface is specified, the SPICE server will be bound
+ to one of the addresses of that interface.
+
+spice\_ip\_version
+ Valid for the KVM hypervisor.
+
+ Specifies which version of the IP protocol should be used by the
+ SPICE server.
+
+ It is mainly intended to be used for specifying what kind of IP
+ addresses should be used if a network interface with both IPv4 and
+ IPv6 addresses is specified via the ``spice_bind`` parameter. In
+ this case, if the ``spice_ip_version`` parameter is not used, the
+ default IP version of the cluster will be used.
+
+spice\_password\_file
+ Valid for the KVM hypervisor.
+
+ Specifies a file containing the password that must be used when
+ connecting via the SPICE protocol. If the option is not specified,
+ passwordless connections are allowed.
+
+spice\_image\_compression
+ Valid for the KVM hypervisor.
+
+ Configures the SPICE lossless image compression. Valid values are:
+
+ - auto_glz
+ - auto_lz
+ - quic
+ - glz
+ - lz
+ - off
+
+spice\_jpeg\_wan\_compression
+ Valid for the KVM hypervisor.
+
+ Configures how SPICE should use the jpeg algorithm for lossy image
+ compression on slow links. Valid values are:
+
+ - auto
+ - never
+ - always
+
+spice\_zlib\_glz\_wan\_compression
+ Valid for the KVM hypervisor.
+
+ Configures how SPICE should use the zlib-glz algorithm for lossy image
+ compression on slow links. Valid values are:
+
+ - auto
+ - never
+ - always
+
+spice\_streaming\_video
+ Valid for the KVM hypervisor.
+
+ Configures how SPICE should detect video streams. Valid values are:
+
+ - off
+ - all
+ - filter
+
+spice\_playback\_compression
+ Valid for the KVM hypervisor.
+
+ Configures whether SPICE should compress audio streams or not.
+
+spice\_use\_tls
+ Valid for the KVM hypervisor.
+
+ Specifies that the SPICE server must use TLS to encrypt all the
+ traffic with the client.
+
+spice\_tls\_ciphers
+ Valid for the KVM hypervisor.
+
+ Specifies a list of comma-separated ciphers that SPICE should use
+ for TLS connections. For the format, see man **cipher**\(1).
+
+spice\_use\_vdagent
+ Valid for the KVM hypervisor.
+
+ Enables or disables passing mouse events via SPICE vdagent.
+
+cpu\_type
+ Valid for the KVM hypervisor.
+
+ This parameter determines the emulated cpu for the instance. If this
+ parameter is empty (which is the default configuration), it will not
+ be passed to KVM.
+
+ Be aware of setting this parameter to ``"host"`` if you have nodes
+ with different CPUs from each other. Live migration may stop working
+ in this situation.
+
+ For more information please refer to the KVM manual.
+
acpi
Valid for the Xen HVM and KVM hypervisors.
Valid for the Xen PVM and KVM hypervisors.
This option specifies the path (on the node) to the kernel to boot
- the instance with. Xen PVM instances always require this, while
- for KVM if this option is empty, it will cause the machine to load
- the kernel from its disks.
+ the instance with. Xen PVM instances always require this, while for
+ KVM if this option is empty, it will cause the machine to load the
+ kernel from its disks (and the boot will be done accordingly to
+ ``boot_order``).
kernel\_args
Valid for the Xen PVM and KVM hypervisors.
This boolean option specifies whether to emulate a serial console
for the instance.
+serial\_speed
+ Valid for the KVM hypervisor.
+
+ This integer option specifies the speed of the serial console.
+ Common values are 9600, 19200, 38400, 57600 and 115200: choose the
+ one which works on your system. (The default is 38400 for historical
+ reasons, but newer versions of kvm/qemu work with 115200)
+
disk\_cache
Valid for the KVM hypervisor.
use\_chroot
Valid for the KVM hypervisor.
- This boolean option determines wether to run the KVM instance in a
+ This boolean option determines whether to run the KVM instance in a
chroot directory.
If it is set to ``true``, an empty directory is created before
versions >= 0.11.0.
cpu\_mask
- Valid for the LXC hypervisor.
+ Valid for the Xen, KVM and LXC hypervisors.
The processes belonging to the given instance are only scheduled
on the specified CPUs.
- The parameter format is a comma-separated list of CPU IDs or CPU
- ID ranges. The ranges are defined by a lower and higher boundary,
- separated by a dash. The boundaries are inclusive.
+ The format of the mask can be given in three forms. First, the word
+ "all", which signifies the common case where all VCPUs can live on
+ any CPU, based on the hypervisor's decisions.
+
+ Second, a comma-separated list of CPU IDs or CPU ID ranges. The
+ ranges are defined by a lower and higher boundary, separated by a
+ dash, and the boundaries are inclusive. In this form, all VCPUs of
+ the instance will be mapped on the selected list of CPUs. Example:
+ ``0-2,5``, mapping all VCPUs (no matter how many) onto physical CPUs
+ 0, 1, 2 and 5.
+
+ The last form is used for explicit control of VCPU-CPU pinnings. In
+ this form, the list of VCPU mappings is given as a colon (:)
+ separated list, whose elements are the possible values for the
+ second or first form above. In this form, the number of elements in
+ the colon-separated list _must_ equal the number of VCPUs of the
+ instance.
+
+ Example:
+
+ .. code-block:: bash
+
+ # Map the entire instance to CPUs 0-2
+ gnt-instance modify -H cpu_mask=0-2 my-inst
+
+ # Map vCPU 0 to physical CPU 1 and vCPU 1 to CPU 3 (assuming 2 vCPUs)
+ gnt-instance modify -H cpu_mask=1:3 my-inst
+
+ # Pin vCPU 0 to CPUs 1 or 2, and vCPU 1 to any CPU
+ gnt-instance modify -H cpu_mask=1-2:all my-inst
+
+ # Pin vCPU 0 to any CPU, vCPU 1 to CPUs 1, 3, 4 or 5, and CPU 2 to
+ # CPU 0 (backslashes for escaping the comma)
+ gnt-instance modify -H cpu_mask=all:1\\,3-5:0 my-inst
+
+ # Pin entire VM to CPU 0
+ gnt-instance modify -H cpu_mask=0 my-inst
+
+ # Turn off CPU pinning (default setting)
+ gnt-instance modify -H cpu_mask=all my-inst
+
+cpu\_cap
+ Valid for the Xen hypervisor.
+
+ Set the maximum amount of cpu usage by the VM. The value is a percentage
+ between 0 and (100 * number of VCPUs). Default cap is 0: unlimited.
+
+cpu\_weight
+ Valid for the Xen hypervisor.
+
+ Set the cpu time ratio to be allocated to the VM. Valid values are
+ between 1 and 65535. Default weight is 256.
usb\_mouse
Valid for the KVM hypervisor.
"mouse" or "tablet". When using VNC it's recommended to set it to
"tablet".
+keymap
+ Valid for the KVM hypervisor.
+
+ This option specifies the keyboard mapping to be used. It is only
+ needed when using the VNC console. For example: "fr" or "en-gb".
+
+reboot\_behavior
+ Valid for Xen PVM, Xen HVM and KVM hypervisors.
+
+ Normally if an instance reboots, the hypervisor will restart it. If
+ this option is set to ``exit``, the hypervisor will treat a reboot
+ as a shutdown instead.
+
+ It is set to ``reboot`` by default.
+
+cpu\_cores
+ Valid for the KVM hypervisor.
+
+ Number of emulated CPU cores.
+
+cpu\_threads
+ Valid for the KVM hypervisor.
+
+ Number of emulated CPU threads.
+
+cpu\_sockets
+ Valid for the KVM hypervisor.
+
+ Number of emulated CPU sockets.
+
+soundhw
+ Valid for the KVM hypervisor.
+
+ Comma separated list of emulated sounds cards, or "all" to enable
+ all the available ones.
+
+usb\_devices
+ Valid for the KVM hypervisor.
+
+ Comma separated list of usb devices. These can be emulated devices
+ or passthrough ones, and each one gets passed to kvm with its own
+ ``-usbdevice`` option. See the **qemu**\(1) manpage for the syntax
+ of the possible components.
+
+vga
+ Valid for the KVM hypervisor.
+
+ Emulated vga mode, passed the the kvm -vga option.
+
+kvm\_extra
+ Valid for the KVM hypervisor.
+
+ Any other option to the KVM hypervisor, useful tweaking anything
+ that Ganeti doesn't support.
+
+machine\_version
+ Valid for the KVM hypervisor.
+
+ Use in case an instance must be booted with an exact type of
+ machine version (due to e.g. outdated drivers). In case it's not set
+ the default version supported by your version of kvm is used.
+
+kvm\_path
+ Valid for the KVM hypervisor.
+
+ Path to the userspace KVM (or qemu) program.
The ``-O (--os-parameters)`` option allows customisation of the OS
parameters. The actual parameter names and values depends on the OS
gnt-instance add -O dhcp=yes ...
-The ``-I (--iallocator)`` option specifies the instance allocator
-plugin to use. If you pass in this option the allocator will select
-nodes for this instance automatically, so you don't need to pass them
-with the ``-n`` option. For more information please refer to the
-instance allocator documentation.
+The ``-I (--iallocator)`` option specifies the instance allocator plugin
+to use (``.`` means the default allocator). If you pass in this option
+the allocator will select nodes for this instance automatically, so you
+don't need to pass them with the ``-n`` option. For more information
+please refer to the instance allocator documentation.
The ``-t (--disk-template)`` options specifies the disk layout type
for the instance. The available choices are:
file
Disk devices will be regular files.
+sharedfile
+ Disk devices will be regulare files on a shared directory.
+
plain
Disk devices will be logical volumes.
drbd
Disk devices will be drbd (version 8.x) on top of lvm volumes.
+rbd
+ Disk devices will be rbd volumes residing inside a RADOS cluster.
+
+blockdev
+ Disk devices will be adopted pre-existent block devices.
+
+ext
+ Disk devices will be provided by external shared storage,
+ through the ExtStorage Interface using ExtStorage providers.
The optional second value of the ``-n (--node)`` is used for the drbd
template type and specifies the remote node.
instances. The full path of the directory where the disk files are
stored will consist of cluster-wide file storage directory + optional
subdirectory + instance name. Example:
-``@RPL_FILE_STORAGE_DIR@``*/mysubdir/instance1.example.com*. This
+``@RPL_FILE_STORAGE_DIR@/mysubdir/instance1.example.com``. This
option is only relevant for instances using the file storage backend.
The ``--file-driver`` specifies the driver to use for file-based
better performance. Especially if you use a network file system
(e.g. NFS) to store your instances this is the recommended choice.
+If ``--ignore-ipolicy`` is given any instance policy violations occuring
+during this operation are ignored.
-The ``--submit`` option is used to send the job to the master daemon
-but not wait for its completion. The job ID will be shown so that it
-can be examined via **gnt-job info**.
+See **ganeti**\(7) for a description of ``--submit`` and other common
+options.
Example::
- # gnt-instance add -t file --disk 0:size=30g -B memory=512 -o debian-etch \
+ # gnt-instance add -t file --disk 0:size=30g -B maxmem=512 -o debian-etch \
-n node1.example.com --file-storage-dir=mysubdir instance1.example.com
- # gnt-instance add -t plain --disk 0:size=30g -B memory=512 -o debian-etch \
- -n node1.example.com instance1.example.com
+ # gnt-instance add -t plain --disk 0:size=30g -B maxmem=1024,minmem=512 \
+ -o debian-etch -n node1.example.com instance1.example.com
# gnt-instance add -t plain --disk 0:size=30g --disk 1:size=100g,vg=san \
- -B memory=512 -o debian-etch -n node1.example.com instance1.example.com
- # gnt-instance add -t drbd --disk 0:size=30g -B memory=512 -o debian-etch \
+ -B maxmem=512 -o debian-etch -n node1.example.com instance1.example.com
+ # gnt-instance add -t drbd --disk 0:size=30g -B maxmem=512 -o debian-etch \
-n node1.example.com:node2.example.com instance2.example.com
+ # gnt-instance add -t rbd --disk 0:size=30g -B maxmem=512 -o debian-etch \
+ -n node1.example.com instance1.example.com
+ # gnt-instance add -t ext --disk 0:size=30g,provider=pvdr1 -B maxmem=512 \
+ -o debian-etch -n node1.example.com instance1.example.com
+ # gnt-instance add -t ext --disk 0:size=30g,provider=pvdr1,param1=val1 \
+ --disk 1:size=40g,provider=pvdr2,param2=val2,param3=val3 -B maxmem=512 \
+ -o debian-etch -n node1.example.com instance1.example.com
BATCH-CREATE
mac, ip, mode, link
Specifications for the one NIC that will be created for the
- instance. 'bridge' is also accepted as a backwards compatibile
+ instance. 'bridge' is also accepted as a backwards compatible
key.
nics
- List of nics that will be created for the instance. Each entry
+ List of NICs that will be created for the instance. Each entry
should be a dict, with mac, ip, mode and link as possible keys.
Please don't provide the "mac, ip, mode, link" parent keys if you
- use this method for specifying nics.
+ use this method for specifying NICs.
primary\_node, secondary\_node
The primary and optionally the secondary node to use for the
"iallocator": "dumb",
"hypervisor": "xen-hvm",
"hvparams": {"acpi": true},
- "backend": {"memory": 512}
+ "backend": {"maxmem": 512, "minmem": 256}
}
}
REMOVE
^^^^^^
-**remove** [--ignore-failures] [--shutdown-timeout=*N*] [--submit]
-{*instance*}
+**remove** [\--ignore-failures] [\--shutdown-timeout=*N*] [\--submit]
+[\--force] {*instance*}
Remove an instance. This will remove all data from the instance and
there is *no way back*. If you are not sure if you use an instance
kvm process for KVM, etc.). By default two minutes are given to each
instance to stop.
-The ``--submit`` option is used to send the job to the master daemon
-but not wait for its completion. The job ID will be shown so that it
-can be examined via **gnt-job info**.
+The ``--force`` option is used to skip the interactive confirmation.
+
+See **ganeti**\(7) for a description of ``--submit`` and other common
+options.
Example::
^^^^
| **list**
-| [--no-headers] [--separator=*SEPARATOR*] [--units=*UNITS*] [-v]
-| [{-o|--output} *[+]FIELD,...*] [instance...]
+| [\--no-headers] [\--separator=*SEPARATOR*] [\--units=*UNITS*] [-v]
+| [{-o|\--output} *[+]FIELD,...*] [\--filter] [instance...]
Shows the currently configured instances with memory usage, disk
usage, the node they are running on, and their run status.
a given output unit.
The ``-v`` option activates verbose mode, which changes the display of
-special field states (see **ganeti(7)**).
+special field states (see **ganeti**\(7)).
The ``-o (--output)`` option takes a comma-separated list of output
fields. The available fields and their meaning are:
-name
- the instance name
-
-os
- the OS of the instance
-
-pnode
- the primary node of the instance
-
-snodes
- comma-separated list of secondary nodes for the instance; usually
- this will be just one node
-
-admin\_state
- the desired state of the instance (either "yes" or "no" denoting
- the instance should run or not)
-
-disk\_template
- the disk template of the instance
-
-oper\_state
- the actual state of the instance; can be one of the values
- "running", "stopped", "(node down)"
-
-status
- combined form of ``admin_state`` and ``oper_stat``; this can be one of:
- ``ERROR_nodedown`` if the node of the instance is down, ``ERROR_down`` if
- the instance should run but is down, ``ERROR_up`` if the instance should be
- stopped but is actually running, ``ERROR_wrongnode`` if the instance is
- running but not on the primary, ``ADMIN_down`` if the instance has been
- stopped (and is stopped) and ``running`` if the instance is set to be
- running (and is running)
-
-oper\_ram
- the actual memory usage of the instance as seen by the hypervisor
-
-oper\_vcpus
- the actual number of VCPUs the instance is using as seen by the
- hypervisor
-
-ip
- the ip address Ganeti recognizes as associated with the first
- instance interface
-
-mac
- the first instance interface MAC address
-
-nic\_mode
- the mode of the first instance NIC (routed or bridged)
-
-nic\_link
- the link of the first instance NIC
-
-sda\_size
- the size of the instance's first disk
-
-sdb\_size
- the size of the instance's second disk, if any
-
-vcpus
- the number of VCPUs allocated to the instance
-
-tags
- comma-separated list of the instances's tags
-
-serial\_no
- the so called 'serial number' of the instance; this is a numeric
- field that is incremented each time the instance is modified, and
- it can be used to track modifications
-
-ctime
- the creation time of the instance; note that this field contains
- spaces and as such it's harder to parse
-
- if this attribute is not present (e.g. when upgrading from older
- versions), then "N/A" will be shown instead
-
-mtime
- the last modification time of the instance; note that this field
- contains spaces and as such it's harder to parse
-
- if this attribute is not present (e.g. when upgrading from older
- versions), then "N/A" will be shown instead
-
-uuid
- Show the UUID of the instance (generated automatically by Ganeti)
-
-network\_port
- If the instance has a network port assigned to it (e.g. for VNC
- connections), this will be shown, otherwise - will be displayed.
-
-beparams
- A text format of the entire beparams for the instance. It's more
- useful to select individual fields from this dictionary, see
- below.
-
-disk.count
- The number of instance disks.
-
-disk.size/N
- The size of the instance's Nth disk. This is a more generic form of
- the sda\_size and sdb\_size fields.
-
-disk.sizes
- A comma-separated list of the disk sizes for this instance.
-
-disk\_usage
- The total disk space used by this instance on each of its nodes.
- This is not the instance-visible disk size, but the actual disk
- "cost" of the instance.
-
-nic.mac/N
- The MAC of the Nth instance NIC.
-
-nic.ip/N
- The IP address of the Nth instance NIC.
-
-nic.mode/N
- The mode of the Nth instance NIC
-
-nic.link/N
- The link of the Nth instance NIC
-
-nic.macs
- A comma-separated list of all the MACs of the instance's NICs.
-
-nic.ips
- A comma-separated list of all the IP addresses of the instance's
- NICs.
-
-nic.modes
- A comma-separated list of all the modes of the instance's NICs.
-
-nic.links
- A comma-separated list of all the link parameters of the instance's
- NICs.
-
-nic.count
- The number of instance nics.
-
-hv/*NAME*
- The value of the hypervisor parameter called *NAME*. For details of
- what hypervisor parameters exist and their meaning, see the **add**
- command.
-
-be/memory
- The configured memory for the instance.
-
-be/vcpus
- The configured number of VCPUs for the instance.
-
-be/auto\_balance
- Whether the instance is considered in N+1 checks.
-
+@QUERY_FIELDS_INSTANCE@
If the value of the option starts with the character ``+``, the new
-field(s) will be added to the default list. This allows to quickly see
-the default list plus a few other fields, instead of retyping the
+field(s) will be added to the default list. This allows one to quickly
+see the default list plus a few other fields, instead of retyping the
entire list of fields.
There is a subtle grouping about the available output fields: all
you only want some data and it makes sense to specify a reduced set of
output fields.
-The default output field list is: name, os, pnode, admin\_state,
-oper\_state, oper\_ram.
+If exactly one argument is given and it appears to be a query filter
+(see **ganeti**\(7)), the query result is filtered accordingly. For
+ambiguous cases (e.g. a single field name as a filter) the ``--filter``
+(``-F``) option forces the argument to be treated as a filter (e.g.
+``gnt-instance list -F admin_state``).
+
+The default output field list is: ``name``, ``os``, ``pnode``,
+``admin_state``, ``oper_state``, ``oper_ram``.
LIST-FIELDS
-~~~~~~~~~~~
+^^^^^^^^^^^
**list-fields** [field...]
INFO
^^^^
-**info** [-s \| --static] [--roman] {--all \| *instance*}
+**info** [-s \| \--static] [\--roman] {\--all \| *instance*}
Show detailed information about the given instance(s). This is
different from **list** as it shows detailed data about the instance's
^^^^^^
| **modify**
-| [{-H|--hypervisor-parameters} *HYPERVISOR\_PARAMETERS*]
-| [{-B|--backend-parameters} *BACKEND\_PARAMETERS*]
-| [--net add*[:options]* \| --net remove \| --net *N:options*]
-| [--disk add:size=*SIZE*[,vg=*VG*][,metavg=*VG*] \| --disk remove \|
-| --disk *N*:mode=*MODE*]
-| [{-t|--disk-template} plain | {-t|--disk-template} drbd -n *new_secondary*] [--no-wait-for-sync]
-| [--os-type=*OS* [--force-variant]]
-| [{-O|--os-parameters} *param*=*value*... ]
-| [--submit]
+| [{-H|\--hypervisor-parameters} *HYPERVISOR\_PARAMETERS*]
+| [{-B|\--backend-parameters} *BACKEND\_PARAMETERS*]
+| [{-m|\--runtime-memory} *SIZE*]
+| [\--net add*[:options]* \| \--net [*N*:]remove \| \--net *N:options*]
+| [\--disk add:size=*SIZE*[,vg=*VG*][,metavg=*VG*] \|
+| \--disk add:size=*SIZE*,provider=*PROVIDER*[,param=*value*... ] \|
+| \--disk [*N*:]remove \|
+| \--disk *N*:mode=*MODE*]
+| [{-t|\--disk-template} plain | {-t|\--disk-template} drbd -n *new_secondary*] [\--no-wait-for-sync]
+| [\--os-type=*OS* [\--force-variant]]
+| [{-O|\--os-parameters} *param*=*value*... ]
+| [\--offline \| \--online]
+| [\--submit]
+| [\--ignore-ipolicy]
| {*instance*}
Modifies the memory size, number of vcpus, ip address, MAC address
-and/or nic parameters for an instance. It can also add and remove
+and/or NIC parameters for an instance. It can also add and remove
disks and NICs to/from the instance. Note that you need to give at
least one of the arguments, otherwise the command complains.
to the ``drbd`` template in order to make the instance available for
startup before DRBD has finished resyncing.
+The ``-m (--runtime-memory)`` option will change an instance's runtime
+memory to the given size (in MB if a different suffix is not specified),
+by ballooning it up or down to the new value.
+
The ``--disk add:size=``*SIZE* option adds a disk to the instance. The
-optional ``vg=``*VG* option specifies LVM volume group other than
-default vg to create the disk on. For DRBD disks, the ``metavg=``*VG*
-option specifies the volume group for the metadata device. The
-``--disk remove`` option will remove the last disk of the
-instance. The ``--disk`` *N*``:mode=``*MODE* option will change the
-mode of the Nth disk of the instance between read-only (``ro``) and
-read-write (``rw``).
-
-The ``--net add:``*options* option will add a new NIC to the
-instance. The available options are the same as in the **add** command
-(mac, ip, link, mode). The ``--net remove`` will remove the last NIC
-of the instance, while the ``--net`` *N*:*options* option will change
-the parameters of the Nth instance NIC.
+optional ``vg=``*VG* option specifies an LVM volume group other than the
+default volume group to create the disk on. For DRBD disks, the
+``metavg=``*VG* option specifies the volume group for the metadata
+device. When adding an ExtStorage disk the ``provider=``*PROVIDER*
+option is also mandatory and specifies the ExtStorage provider. Also,
+for ExtStorage disks arbitrary parameters can be passed as additional
+comma separated options, same as in the **add** command. ``--disk``
+*N*``:add,size=``**SIZE** can be used to add a disk at a specific index.
+The ``--disk remove`` option will remove the last disk of the instance.
+Use ``--disk `` *N*``:remove`` to remove a disk by its index. The
+``--disk`` *N*``:mode=``*MODE* option will change the mode of the Nth
+disk of the instance between read-only (``ro``) and read-write (``rw``).
+
+The ``--net add:``*options* and ``--net`` *N*``:add,``*options* option
+will add a new network interface to the instance. The available options
+are the same as in the **add** command (``mac``, ``ip``, ``link``,
+``mode``, ``network``). The ``--net remove`` will remove the last network
+interface of the instance (``--net`` *N*``:remove`` for a specific index),
+while the ``--net`` *N*``:``*options* option will change the parameters of
+the Nth instance network interface.
The option ``-o (--os-type)`` will change the OS name for the instance
(without reinstallation). In case an OS variant is specified that is
``--force-variant`` is passed. An invalid OS will also be refused,
unless the ``--force`` option is given.
-The ``--submit`` option is used to send the job to the master daemon
-but not wait for its completion. The job ID will be shown so that it
-can be examined via **gnt-job info**.
+The ``--online`` and ``--offline`` options are used to transition an
+instance into and out of the ``offline`` state. An instance can be
+turned offline only if it was previously down. The ``--online`` option
+fails if the instance was not in the ``offline`` state, otherwise it
+changes instance's state to ``down``. These modifications take effect
+immediately.
+
+If ``--ignore-ipolicy`` is given any instance policy violations occuring
+during this operation are ignored.
+
+See **ganeti**\(7) for a description of ``--submit`` and other common
+options.
-All the changes take effect at the next restart. If the instance is
+Most of the changes take effect at the next restart. If the instance is
running, there is no effect on the instance.
REINSTALL
^^^^^^^^^
-| **reinstall** [{-o|--os-type} *os-type*] [--select-os] [-f *force*]
-| [--force-multiple]
-| [--instance \| --node \| --primary \| --secondary \| --all]
-| [{-O|--os-parameters} *OS\_PARAMETERS*] [--submit] {*instance*...}
+| **reinstall** [{-o|\--os-type} *os-type*] [\--select-os] [-f *force*]
+| [\--force-multiple]
+| [\--instance \| \--node \| \--primary \| \--secondary \| \--all]
+| [{-O|\--os-parameters} *OS\_PARAMETERS*] [\--submit] {*instance*...}
Reinstalls the operating system on the given instance(s). The
instance(s) must be stopped when running this command. If the ``-o
or ``--all`` options), the user must pass the ``--force-multiple``
options to skip the interactive confirmation.
-The ``--submit`` option is used to send the job to the master daemon
-but not wait for its completion. The job ID will be shown so that it
-can be examined via **gnt-job info**.
+See **ganeti**\(7) for a description of ``--submit`` and other common
+options.
RENAME
^^^^^^
-| **rename** [--no-ip-check] [--no-name-check] [--submit]
+| **rename** [\--no-ip-check] [\--no-name-check] [\--submit]
| {*instance*} {*new\_name*}
Renames the given instance. The instance must be stopped when running
the next time the instance is started). The IP test can be skipped if
the ``--no-ip-check`` option is passed.
+Note that you can rename an instance to its same name, to force
+re-executing the os-specific rename script for that instance, if
+needed.
+
The ``--no-name-check`` skips the check for the new instance name via
-the resolver (e.g. in DNS or /etc/hosts, depending on your
-setup). Since the name check is used to compute the IP address, if you
-pass this option you must also pass the ``--no-ip-check`` option.
+the resolver (e.g. in DNS or /etc/hosts, depending on your setup) and
+that the resolved name matches the provided name. Since the name check
+is used to compute the IP address, if you pass this option you must also
+pass the ``--no-ip-check`` option.
-The ``--submit`` option is used to send the job to the master daemon
-but not wait for its completion. The job ID will be shown so that it
-can be examined via **gnt-job info**.
+See **ganeti**\(7) for a description of ``--submit`` and other common
+options.
Starting/stopping/connecting to console
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
^^^^^^^
| **startup**
-| [--force] [--ignore-offline]
-| [--force-multiple]
-| [--instance \| --node \| --primary \| --secondary \| --all \|
-| --tags \| --node-tags \| --pri-node-tags \| --sec-node-tags]
-| [{-H|--hypervisor-parameters} ``key=value...``]
-| [{-B|--backend-parameters} ``key=value...``]
-| [--submit]
+| [\--force] [\--ignore-offline]
+| [\--force-multiple] [\--no-remember]
+| [\--instance \| \--node \| \--primary \| \--secondary \| \--all \|
+| \--tags \| \--node-tags \| \--pri-node-tags \| \--sec-node-tags]
+| [{-H|\--hypervisor-parameters} ``key=value...``]
+| [{-B|\--backend-parameters} ``key=value...``]
+| [\--submit] [\--paused]
| {*name*...}
Starts one or more instances, depending on the following options. The
four available modes are:
---instance
+\--instance
will start the instances given as arguments (at least one argument
required); this is the default selection
---node
+\--node
will start the instances who have the given node as either primary
or secondary
---primary
+\--primary
will start all instances whose primary node is in the list of nodes
passed as arguments (at least one node required)
---secondary
+\--secondary
will start all instances whose secondary node is in the list of
nodes passed as arguments (at least one node required)
---all
+\--all
will start all instances in the cluster (no arguments accepted)
---tags
+\--tags
will start all instances in the cluster with the tags given as
arguments
---node-tags
+\--node-tags
will start all instances in the cluster on nodes with the tags
given as arguments
---pri-node-tags
+\--pri-node-tags
will start all instances in the cluster on primary nodes with the
tags given as arguments
---sec-node-tags
+\--sec-node-tags
will start all instances in the cluster on secondary nodes with the
tags given as arguments
-
Note that although you can pass more than one selection option, the
last one wins, so in order to guarantee the desired result, don't pass
more than one such option.
The ``--force-multiple`` will skip the interactive confirmation in the
case the more than one instance will be affected.
+The ``--no-remember`` option will perform the startup but not change
+the state of the instance in the configuration file (if it was stopped
+before, Ganeti will still think it needs to be stopped). This can be
+used for testing, or for a one shot-start where you don't want the
+watcher to restart the instance if it crashes.
+
The ``-H (--hypervisor-parameters)`` and ``-B (--backend-parameters)``
options specify temporary hypervisor and backend parameters that can
be used to start an instance with modified parameters. They can be
useful for quick testing without having to modify an instance back and
forth, e.g.::
- # gnt-instance start -H root_args="single" instance1
- # gnt-instance start -B memory=2048 instance2
+ # gnt-instance start -H kernel_args="single" instance1
+ # gnt-instance start -B maxmem=2048 instance2
The first form will start the instance instance1 in single-user mode,
and the instance instance2 with 2GB of RAM (this time only, unless
that is the actual instance memory size already). Note that the values
override the instance parameters (and not extend them): an instance
-with "root\_args=ro" when started with -H root\_args=single will
-result in "single", not "ro single". The ``--submit`` option is used
-to send the job to the master daemon but not wait for its
-completion. The job ID will be shown so that it can be examined via
-**gnt-job info**.
+with "kernel\_args=ro" when started with -H kernel\_args=single will
+result in "single", not "ro single".
+
+The ``--paused`` option is only valid for Xen and kvm hypervisors. This
+pauses the instance at the start of bootup, awaiting ``gnt-instance
+console`` to unpause it, allowing the entire boot process to be
+monitored for debugging.
+
+See **ganeti**\(7) for a description of ``--submit`` and other common
+options.
Example::
^^^^^^^^
| **shutdown**
-| [--timeout=*N*]
-| [--force-multiple] [--ignore-offline]
-| [--instance \| --node \| --primary \| --secondary \| --all \|
-| --tags \| --node-tags \| --pri-node-tags \| --sec-node-tags]
-| [--submit]
+| [\--timeout=*N*]
+| [\--force] [\--force-multiple] [\--ignore-offline] [\--no-remember]
+| [\--instance \| \--node \| \--primary \| \--secondary \| \--all \|
+| \--tags \| \--node-tags \| \--pri-node-tags \| \--sec-node-tags]
+| [\--submit]
| {*name*...}
Stops one or more instances. If the instance cannot be cleanly stopped
``--sec-node-tags`` options are similar as for the **startup** command
and they influence the actual instances being shutdown.
-The ``--submit`` option is used to send the job to the master daemon
-but not wait for its completion. The job ID will be shown so that it
-can be examined via **gnt-job info**.
-
``--ignore-offline`` can be used to ignore offline primary nodes and
force the instance to be marked as stopped. This option should be used
with care as it can lead to an inconsistent cluster state.
+Use ``--force`` to be able to shutdown an instance even when it's marked
+as offline. This is useful is an offline instance ends up in the
+``ERROR_up`` state, for example.
+
+The ``--no-remember`` option will perform the shutdown but not change
+the state of the instance in the configuration file (if it was running
+before, Ganeti will still thinks it needs to be running). This can be
+useful for a cluster-wide shutdown, where some instances are marked as
+up and some as down, and you don't want to change the running state:
+you just need to disable the watcher, shutdown all instances with
+``--no-remember``, and when the watcher is activated again it will
+restore the correct runtime state for all instances.
+
+See **ganeti**\(7) for a description of ``--submit`` and other common
+options.
+
Example::
# gnt-instance shutdown instance1.example.com
^^^^^^
| **reboot**
-| [{-t|--type} *REBOOT-TYPE*]
-| [--ignore-secondaries]
-| [--shutdown-timeout=*N*]
-| [--force-multiple]
-| [--instance \| --node \| --primary \| --secondary \| --all \|
-| --tags \| --node-tags \| --pri-node-tags \| --sec-node-tags]
-| [--submit]
+| [{-t|\--type} *REBOOT-TYPE*]
+| [\--ignore-secondaries]
+| [\--shutdown-timeout=*N*]
+| [\--force-multiple]
+| [\--instance \| \--node \| \--primary \| \--secondary \| \--all \|
+| \--tags \| \--node-tags \| \--pri-node-tags \| \--sec-node-tags]
+| [\--submit]
| [*name*...]
Reboots one or more instances. The type of reboot depends on the value
The ``--force-multiple`` will skip the interactive confirmation in the
case the more than one instance will be affected.
+See **ganeti**\(7) for a description of ``--submit`` and other common
+options.
+
Example::
# gnt-instance reboot instance1.example.com
CONSOLE
^^^^^^^
-**console** [--show-cmd] {*instance*}
+**console** [\--show-cmd] {*instance*}
Connects to the console of the given instance. If the instance is not
up, an error is returned. Use the ``--show-cmd`` option to display the
HVM instance, use a VNC client with the connection info from the
**info** command.
+For Xen/kvm instances, if the instance is paused, this attempts to
+unpause the instance after waiting a few seconds for the connection to
+the console to be made.
+
Example::
# gnt-instance console instance1.example.com
REPLACE-DISKS
^^^^^^^^^^^^^
-**replace-disks** [--submit] [--early-release] {-p} [--disks *idx*]
-{*instance*}
+**replace-disks** [\--submit] [\--early-release] [\--ignore-ipolicy] {-p}
+[\--disks *idx*] {*instance*}
-**replace-disks** [--submit] [--early-release] {-s} [--disks *idx*]
-{*instance*}
+**replace-disks** [\--submit] [\--early-release] [\--ignore-ipolicy] {-s}
+[\--disks *idx*] {*instance*}
-**replace-disks** [--submit] [--early-release] {--iallocator *name*
-\| --new-secondary *NODE*} {*instance*}
+**replace-disks** [\--submit] [\--early-release] [\--ignore-ipolicy]
+{{-I\|\--iallocator} *name* \| {{-n|\--new-secondary} *node* } {*instance*}
-**replace-disks** [--submit] [--early-release] {--auto}
-{*instance*}
+**replace-disks** [\--submit] [\--early-release] [\--ignore-ipolicy]
+{-a\|\--auto} {*instance*}
This command is a generalized form for replacing disks. It is
currently only valid for the mirrored (DRBD) disk template.
the first and third disks.
The third form (when passing either the ``--iallocator`` or the
-``--new-secondary`` option) is designed to change secondary node of
-the instance. Specifying ``--iallocator`` makes the new secondary be
-selected automatically by the specified allocator plugin, otherwise
-the new secondary node will be the one chosen manually via the
-``--new-secondary`` option.
+``--new-secondary`` option) is designed to change secondary node of the
+instance. Specifying ``--iallocator`` makes the new secondary be
+selected automatically by the specified allocator plugin (use ``.`` to
+indicate the default allocator), otherwise the new secondary node will
+be the one chosen manually via the ``--new-secondary`` option.
+
+Note that it is not possible to select an offline or drained node as a
+new secondary.
The fourth form (when using ``--auto``) will automatically determine
which disks of an instance are faulty and replace them within the same
faulty disks on either the primary or secondary node; it doesn't work
when both sides have faulty disks.
-The ``--submit`` option is used to send the job to the master daemon
-but not wait for its completion. The job ID will be shown so that it
-can be examined via **gnt-job info**.
-
The ``--early-release`` changes the code so that the old storage on
secondary node(s) is removed early (before the resync is completed)
and the internal Ganeti locks for the current (and new, if any)
broken) or when the storage on the primary node is known to be fine
(thus we won't need the old storage for potential recovery).
-Note that it is not possible to select an offline or drained node as a
-new secondary.
+The ``--ignore-ipolicy`` let the command ignore instance policy
+violations if replace-disks changes groups and the instance would
+violate the new groups instance policy.
+
+See **ganeti**\(7) for a description of ``--submit`` and other common
+options.
ACTIVATE-DISKS
^^^^^^^^^^^^^^
-**activate-disks** [--submit] [--ignore-size] {*instance*}
+**activate-disks** [\--submit] [\--ignore-size] [\--wait-for-sync] {*instance*}
Activates the block devices of the given instance. If successful, the
command will show the location and name of the block devices::
the devices have been activated. The *disk/0* and *disk/1* are the
Ganeti-names of the instance disks; how they are visible inside the
instance is hypervisor-specific. */dev/drbd0* and */dev/drbd1* are the
-actual block devices as visible on the node. The ``--submit`` option
-is used to send the job to the master daemon but not wait for its
-completion. The job ID will be shown so that it can be examined via
-**gnt-job info**.
+actual block devices as visible on the node.
The ``--ignore-size`` option can be used to activate disks ignoring
the currently configured size in Ganeti. This can be used in cases
in LVM devices). This should not be used in normal cases, but only
when activate-disks fails without it.
+The ``--wait-for-sync`` option will ensure that the command returns only
+after the instance's disks are synchronised (mostly for DRBD); this can
+be useful to ensure consistency, as otherwise there are no commands that
+can wait until synchronisation is done. However when passing this
+option, the command will have additional output, making it harder to
+parse the disk information.
+
Note that it is safe to run this command while the instance is already
running.
+See **ganeti**\(7) for a description of ``--submit`` and other common
+options.
+
DEACTIVATE-DISKS
^^^^^^^^^^^^^^^^
-**deactivate-disks** [-f] [--submit] {*instance*}
+**deactivate-disks** [-f] [\--submit] {*instance*}
De-activates the block devices of the given instance. Note that if you
run this command for an instance with a drbd disk template, while it
the disks. This can still fail due to the instance actually running or
other issues.
-The ``--submit`` option is used to send the job to the master daemon
-but not wait for its completion. The job ID will be shown so that it
-can be examined via **gnt-job info**.
+See **ganeti**\(7) for a description of ``--submit`` and other common
+options.
GROW-DISK
^^^^^^^^^
-**grow-disk** [--no-wait-for-sync] [--submit] {*instance*} {*disk*}
-{*amount*}
+| **grow-disk** [\--no-wait-for-sync] [\--submit] [\--absolute]
+| {*instance*} {*disk*} {*amount*}
Grows an instance's disk. This is only possible for instances having a
-plain or drbd disk template.
+plain, drbd, file, sharedfile, rbd or ext disk template. For the ext
+template to work, the ExtStorage provider should also support growing.
+This means having a ``grow`` script that actually grows the volume of
+the external shared storage.
Note that this command only change the block device size; it will not
grow the actual filesystems, partitions, etc. that live on that
#. reboot the instance (later, at a convenient time)
-#. use a filesystem resizer, such as ext2online(8) or
- xfs\_growfs(8) to resize the filesystem, or use fdisk(8) to change
- the partition table on the disk
+#. use a filesystem resizer, such as **ext2online**\(8) or
+ **xfs\_growfs**\(8) to resize the filesystem, or use **fdisk**\(8) to
+ change the partition table on the disk
The *disk* argument is the index of the instance disk to grow. The
-*amount* argument is given either as a number (and it represents the
-amount to increase the disk with in mebibytes) or can be given similar
-to the arguments in the create instance operation, with a suffix
-denoting the unit.
+*amount* argument is given as a number which can have a suffix (like the
+disk size in instance create); if the suffix is missing, the value will
+be interpreted as mebibytes.
-Note that the disk grow operation might complete on one node but fail
-on the other; this will leave the instance with different-sized LVs on
-the two nodes, but this will not create problems (except for unused
-space).
+By default, the *amount* value represents the desired increase in the
+disk size (e.g. an amount of 1G will take a disk of size 3G to 4G). If
+the optional ``--absolute`` parameter is passed, then the *amount*
+argument doesn't represent the delta, but instead the desired final disk
+size (e.g. an amount of 8G will take a disk of size 4G to 8G).
+
+For instances with a drbd template, note that the disk grow operation
+might complete on one node but fail on the other; this will leave the
+instance with different-sized LVs on the two nodes, but this will not
+create problems (except for unused space).
If you do not want gnt-instance to wait for the new disk region to be
synced, use the ``--no-wait-for-sync`` option.
-The ``--submit`` option is used to send the job to the master daemon
-but not wait for its completion. The job ID will be shown so that it
-can be examined via **gnt-job info**.
+See **ganeti**\(7) for a description of ``--submit`` and other common
+options.
Example (increase the first disk for instance1 by 16GiB)::
# gnt-instance grow-disk instance1.example.com 0 16g
+Example for increasing the disk size to a certain size::
+
+ # gnt-instance grow-disk --absolute instance1.example.com 0 32g
Also note that disk shrinking is not supported; use **gnt-backup
export** and then **gnt-backup import** to reduce the disk size of an
RECREATE-DISKS
^^^^^^^^^^^^^^
-**recreate-disks** [--submit] [--disks=``indices``] [-n node1:[node2]]
- {*instance*}
+| **recreate-disks** [\--submit]
+| [{-n node1:[node2] \| {-I\|\--iallocator *name*}}]
+| [\--disk=*N*[:[size=*VAL*][,mode=*ro\|rw*]]] {*instance*}
-Recreates the disks of the given instance, or only a subset of the
-disks (if the option ``disks`` is passed, which must be a
-comma-separated list of disk indices, starting from zero).
+Recreates all or a subset of disks of the given instance.
Note that this functionality should only be used for missing disks; if
any of the given disks already exists, the operation will fail. While
this is suboptimal, recreate-disks should hopefully not be needed in
normal operation and as such the impact of this is low.
+If only a subset should be recreated, any number of ``disk`` options can
+be specified. It expects a disk index and an optional list of disk
+parameters to change. Only ``size`` and ``mode`` can be changed while
+recreating disks. To recreate all disks while changing parameters on
+a subset only, a ``--disk`` option must be given for every disk of the
+instance.
+
Optionally the instance's disks can be recreated on different
nodes. This can be useful if, for example, the original nodes of the
instance have gone down (and are marked offline), so we can't recreate
on the same nodes. To do this, pass the new node(s) via ``-n`` option,
with a syntax similar to the **add** command. The number of nodes
passed must equal the number of nodes that the instance currently
-has. Note that changing nodes is only allowed for 'all disk'
-replacement (when ``--disks`` is not passed).
+has. Note that changing nodes is only allowed when all disks are
+replaced, e.g. when no ``--disk`` option is passed.
+
+Another method of choosing which nodes to place the instance on is by
+using the specified iallocator, passing the ``--iallocator`` option.
+The primary and secondary nodes will be chosen by the specified
+iallocator plugin, or by the default allocator if ``.`` is specified.
-The ``--submit`` option is used to send the job to the master daemon
-but not wait for its completion. The job ID will be shown so that it
-can be examined via **gnt-job info**.
+See **ganeti**\(7) for a description of ``--submit`` and other common
+options.
-Recovery
-~~~~~~~~
+Recovery/moving
+~~~~~~~~~~~~~~~
FAILOVER
^^^^^^^^
-**failover** [-f] [--ignore-consistency] [--shutdown-timeout=*N*]
-[--submit] {*instance*}
+| **failover** [-f] [\--ignore-consistency] [\--ignore-ipolicy]
+| [\--shutdown-timeout=*N*]
+| [{-n|\--target-node} *node* \| {-I|\--iallocator} *name*]
+| [\--submit]
+| {*instance*}
+
+Failover will stop the instance (if running), change its primary node,
+and if it was originally running it will start it again (on the new
+primary). This works for instances with drbd template (in which case you
+can only fail to the secondary node) and for externally mirrored
+templates (sharedfile, blockdev, rbd and ext) (in which case you can
+fail to any other node).
-Failover will fail the instance over its secondary node. This works
-only for instances having a drbd disk template.
+If the instance's disk template is of type sharedfile, blockdev, rbd or
+ext, then you can explicitly specify the target node (which can be any
+node) using the ``-n`` or ``--target-node`` option, or specify an
+iallocator plugin using the ``-I`` or ``--iallocator`` option. If you
+omit both, the default iallocator will be used to specify the target
+node.
+
+If the instance's disk template is of type drbd, the target node is
+automatically selected as the drbd's secondary node. Changing the
+secondary node is possible with a replace-disks operation.
Normally the failover will check the consistency of the disks before
failing over the instance. If you are trying to migrate instances off
process, for kvm). By default two minutes are given to each instance
to stop.
-The ``--submit`` option is used to send the job to the master daemon
-but not wait for its completion. The job ID will be shown so that it
-can be examined via **gnt-job info**.
+If ``--ignore-ipolicy`` is given any instance policy violations occuring
+during this operation are ignored.
+
+See **ganeti**\(7) for a description of ``--submit`` and other common
+options.
Example::
# gnt-instance failover instance1.example.com
+For externally mirrored templates also ``-n`` is available::
+
+ # gnt-instance failover -n node3.example.com instance1.example.com
+
MIGRATE
^^^^^^^
-**migrate** [-f] {--cleanup} {*instance*}
+| **migrate** [-f] [\--allow-failover] [\--non-live]
+| [\--migration-mode=live\|non-live] [\--ignore-ipolicy]
+| [\--no-runtime-changes] [\--submit]
+| [{-n|\--target-node} *node* \| {-I|\--iallocator} *name*] {*instance*}
+
+| **migrate** [-f] \--cleanup [\--submit] {*instance*}
-**migrate** [-f] [--non-live] [--migration-mode=live\|non-live]
-{*instance*}
+Migrate will move the instance to its secondary node without shutdown.
+As with failover, it works for instances having the drbd disk template
+or an externally mirrored disk template type such as sharedfile,
+blockdev, rbd or ext.
-Migrate will move the instance to its secondary node without
-shutdown. It only works for instances having the drbd8 disk template
-type.
+If the instance's disk template is of type sharedfile, blockdev, rbd or
+ext, then you can explicitly specify the target node (which can be any
+node) using the ``-n`` or ``--target-node`` option, or specify an
+iallocator plugin using the ``-I`` or ``--iallocator`` option. If you
+omit both, the default iallocator will be used to specify the target
+node. Alternatively, the default iallocator can be requested by
+specifying ``.`` as the name of the plugin.
-The migration command needs a perfectly healthy instance, as we rely
-on the dual-master capability of drbd8 and the disks of the instance
-are not allowed to be degraded.
+If the instance's disk template is of type drbd, the target node is
+automatically selected as the drbd's secondary node. Changing the
+secondary node is possible with a replace-disks operation.
+
+The migration command needs a perfectly healthy instance for drbd
+instances, as we rely on the dual-master capability of drbd8 and the
+disks of the instance are not allowed to be degraded.
The ``--non-live`` and ``--migration-mode=non-live`` options will
switch (for the hypervisors that support it) between a "fully live"
viewed with the **gnt-cluster info** command).
If the ``--cleanup`` option is passed, the operation changes from
-migration to attempting recovery from a failed previous migration. In
+migration to attempting recovery from a failed previous migration. In
this mode, Ganeti checks if the instance runs on the correct node (and
-updates its configuration if not) and ensures the instances's disks
+updates its configuration if not) and ensures the instances' disks
are configured correctly. In this mode, the ``--non-live`` option is
ignored.
The option ``-f`` will skip the prompting for confirmation.
+If ``--allow-failover`` is specified it tries to fallback to failover if
+it already can determine that a migration won't work (e.g. if the
+instance is shut down). Please note that the fallback will not happen
+during execution. If a migration fails during execution it still fails.
+
+If ``--ignore-ipolicy`` is given any instance policy violations occuring
+during this operation are ignored.
+
+The ``--no-runtime-changes`` option forbids migrate to alter an
+instance's runtime before migrating it (eg. ballooning an instance
+down because the target node doesn't have enough available memory).
+
+If an instance has the backend parameter ``always_failover`` set to
+true, then the migration is automatically converted into a failover.
+
+See **ganeti**\(7) for a description of ``--submit`` and other common
+options.
+
Example (and expected output)::
# gnt-instance migrate instance1
- Migrate will happen to the instance instance1. Note that migration is
- **experimental** in this version. This might impact the instance if
- anything goes wrong. Continue?
+ Instance instance1 will be migrated. Note that migration
+ might impact the instance if anything goes wrong (e.g. due to bugs in
+ the hypervisor). Continue?
y/[n]/?: y
+ Migrating instance instance1.example.com
* checking disk consistency between source and target
- * ensuring the target is in secondary mode
+ * switching node node2.example.com to secondary mode
+ * changing into standalone mode
* changing disks into dual-master mode
- - INFO: Waiting for instance instance1 to sync disks.
- - INFO: Instance instance1's disks are in sync.
+ * wait until resync is done
+ * preparing node2.example.com to accept the instance
* migrating instance to node2.example.com
- * changing the instance's disks on source node to secondary
- - INFO: Waiting for instance instance1 to sync disks.
- - INFO: Instance instance1's disks are in sync.
- * changing the instance's disks to single-master
+ * switching node node1.example.com to secondary mode
+ * wait until resync is done
+ * changing into standalone mode
+ * changing disks into single-master mode
+ * wait until resync is done
+ * done
#
MOVE
^^^^
-**move** [-f] [--ignore-consistency]
-[-n *node*] [--shutdown-timeout=*N*] [--submit]
-{*instance*}
+| **move** [-f] [\--ignore-consistency]
+| [-n *node*] [\--shutdown-timeout=*N*] [\--submit] [\--ignore-ipolicy]
+| {*instance*}
-Move will move the instance to an arbitrary node in the cluster. This
+Move will move the instance to an arbitrary node in the cluster. This
works only for instances having a plain or file disk template.
Note that since this operation is done via data copy, it will take a
The ``--ignore-consistency`` option will make Ganeti ignore any errors
in trying to shutdown the instance on its node; useful if the
-hypervisor is broken and you want to recuperate the data.
+hypervisor is broken and you want to recover the data.
+
+If ``--ignore-ipolicy`` is given any instance policy violations occuring
+during this operation are ignored.
-The ``--submit`` option is used to send the job to the master daemon
-but not wait for its completion. The job ID will be shown so that it
-can be examined via **gnt-job info**.
+See **ganeti**\(7) for a description of ``--submit`` and other common
+options.
Example::
# gnt-instance move -n node3.example.com instance1.example.com
-TAGS
+CHANGE-GROUP
+^^^^^^^^^^^^
+
+| **change-group** [\--submit]
+| [\--iallocator *NAME*] [\--to *GROUP*...] {*instance*}
+
+This command moves an instance to another node group. The move is
+calculated by an iallocator, either given on the command line or as a
+cluster default.
+
+If no specific destination groups are specified using ``--to``, all
+groups except the one containing the instance are considered.
+
+See **ganeti**\(7) for a description of ``--submit`` and other common
+options.
+
+Example::
+
+ # gnt-instance change-group -I hail --to rack2 inst1.example.com
+
+
+Tags
~~~~
ADD-TAGS
^^^^^^^^
-**add-tags** [--from *file*] {*instancename*} {*tag*...}
+**add-tags** [\--from *file*] {*instancename*} {*tag*...}
Add tags to the given instance. If any of the tags contains invalid
characters, the entire operation will abort.
REMOVE-TAGS
^^^^^^^^^^^
-**remove-tags** [--from *file*] {*instancename*} {*tag*...}
+**remove-tags** [\--from *file*] {*instancename*} {*tag*...}
Remove tags from the given instance. If any of the tags are not
existing on the node, the entire operation will abort.
In this case, there is not need to pass tags on the command line (if
you do, tags from both sources will be removed). A file name of ``-``
will be interpreted as stdin.
+
+.. vim: set textwidth=72 :
+.. Local Variables:
+.. mode: rst
+.. fill-column: 72
+.. End: