kernel parameter <literal>nosmp</literal>.
</para>
+ <para>
+ It is recommended that you disable xen's automatic save of virtual
+ machines at system shutdown and subsequent restore of them at reboot.
+ To obtain this make sure the variable
+ <literal>XENDOMAINS_SAVE</literal> in the file
+ <literal>/etc/default/xendomains</literal> is set to an empty value.
+ </para>
+
<formalpara>
<title>Debian</title>
<para>
</screen>
</para>
</formalpara>
+ <para>
+ If you want to test the HVM support
+ with Ganeti and want VNC access to the console of your
+ instances, set the following two entries in
+ <filename>/etc/xen/xend-config.sxp</filename>:
+<screen>
+(vnc-listen '0.0.0.0')
+(vncpasswd '')
+</screen>
+ You need to restart the Xen daemon for these settings to
+ take effect:
+<screen>
+/etc/init.d/xend restart
+</screen>
+ </para>
</sect3>
</para>
<para>
- Supported DRBD version: the <literal>0.7</literal>
- series. It's recommended to have at least version
- <literal>0.7.24</literal> if you use <command>udev</command>
- since older versions have a bug related to device discovery
- which can be triggered in cases of hard drive failure.
+ Supported DRBD versions: the <literal>0.7</literal> series
+ <emphasis role="strong">or</emphasis>
+ <literal>8.0.7</literal>. It's recommended to have at least
+ version <literal>0.7.24</literal> if you use
+ <command>udev</command> since older versions have a bug
+ related to device discovery which can be triggered in cases of
+ hard drive failure.
</para>
<para>
you have the DRBD utils installed and the module in your
kernel you're fine. Please check that your system is
configured to load the module at every boot, and that it
- passes the following option to the module:
+ passes the following option to the module (for
+ <literal>0.7.x</literal>:
<computeroutput>minor_count=64</computeroutput> (this will
- allow you to use up to 32 instances per node).
+ allow you to use up to 32 instances per node) or for
+ <literal>8.0.x</literal> you can use up to
+ <constant>255</constant>
+ (i.e. <computeroutput>minor_count=255</computeroutput>, but
+ for most clusters <constant>128</constant> should be enough).
</para>
<formalpara><title>Debian</title>
echo drbd minor_count=64 >> /etc/modules
modprobe drbd minor_count=64
</screen>
+ <para>
+ or for using DRBD <literal>8.x</literal> from the etch
+ backports (note: you need at least 8.0.7, older version have
+ a bug that breaks ganeti's usage of drbd):
+ </para>
+ <screen>
+apt-get install -t etch-backports drbd8-module-source drbd8-utils
+m-a update
+m-a a-i drbd8
+echo drbd minor_count=128 >> /etc/modules
+modprobe drbd minor_count=128
+ </screen>
<para>
It is also recommended that you comment out the default
<screen>
# apt-get install lvm2 ssh bridge-utils iproute iputils-arping \
python2.4 python-twisted-core python-pyopenssl openssl \
- mdadm
+ mdadm python-pyparsing python-simplejson
</screen>
</sect2>
</para>
<screen>
-tar xvzf ganeti-1.2b1.tar.gz
-cd ganeti-1.2b1
+tar xvzf ganeti-@GANETI_VERSION@.tar.gz
+cd ganeti-@GANETI_VERSION@
./configure --localstatedir=/var --sysconfdir=/etc
make
make install
provided on the project web site. Download it from <ulink
url="http://code.google.com/p/ganeti/"></ulink> and follow the
instructions in the <filename>README</filename> file. Here is
- the installation procedure:
+ the installation procedure (replace <constant>0.2</constant>
+ with the latest version that is compatible with your ganeti
+ version):
</para>
<screen>
cd /srv/ganeti/os
-tar xvf instance-debian-etch-0.1.tar
-mv instance-debian-etch-0.1 debian-etch
+tar xvf ganeti-instance-debian-etch-0.4.tar
+mv ganeti-instance-debian-etch-0.4 debian-etch
</screen>
<para>
nodes names for a multi-node cluster. In general the best
choice is to have a unique name for a cluster, even if it
consists of only one machine, as you will be able to expand it
- later without any problems.
+ later without any problems. Please note that the hostname used
+ for this must resolve to an IP address reserved exclusively
+ for this purpose.
</para>
<para>
</para>
<para>
+ To set up the cluster as an HVM cluster, use the
+ <option>--hypervisor=xen-hvm3.1</option> option to use
+ the Xen 3.1 HVM hypervisor. Note that with the
+ HVM support, you will only be able to create
+ HVM instances in a cluster set to this hypervisor type. Mixed
+ PVM/HVM clusters are not supported by the Ganeti 1.2
+ HVM support. You will also need to create the VNC
+ cluster password file
+ <filename>/etc/ganeti/vnc-cluster-password</filename>
+ which contains one line with the default VNC password for the
+ cluster.
+ </para>
+
+ <para>
You can also invoke the command with the
<option>--help</option> option in order to see all the
possibilities.
This step shows how to setup a virtual instance with either
non-mirrored disks (<computeroutput>plain</computeroutput>) or
with network mirrored disks
- (<computeroutput>remote_raid1</computeroutput>). All commands
- need to be executed on the Ganeti master node (the one on
- which <computeroutput>gnt-cluster init</computeroutput> was
- run). Verify that the OS scripts are present on all cluster
- nodes with <computeroutput>gnt-os list</computeroutput>.
+ (<computeroutput>remote_raid1</computeroutput> for drbd 0.7
+ and <computeroutput>drbd</computeroutput> for drbd 8.x). All
+ commands need to be executed on the Ganeti master node (the
+ one on which <computeroutput>gnt-cluster init</computeroutput>
+ was run). Verify that the OS scripts are present on all
+ cluster nodes with <computeroutput>gnt-os
+ list</computeroutput>.
</para>
<para>
To create a virtual instance, you need a hostname which is
<para>
To create a network mirrored instance, change the argument to
the <option>-t</option> option from <literal>plain</literal>
- to <literal>remote_raid1</literal> and specify the node on
+ to <literal>remote_raid1</literal> (drbd 0.7) or
+ <literal>drbd</literal> (drbd 8.0) and specify the node on
which the mirror should reside with the second value of the
<option>--node</option> option, like this:
</para>
<para>
To failover an instance to its secondary node (only possible
- in <literal>remote_raid1</literal> setup), use
- <computeroutput>gnt-instance failover
+ in <literal>remote_raid1</literal> or <literal>drbd</literal>
+ disk templates), use <computeroutput>gnt-instance failover
<replaceable>INSTANCENAME</replaceable></computeroutput>.
</para>
projects / ganeti-local / blobdiff