Iustin Pop [Thu, 12 Mar 2009 19:54:41 +0000 (20:54 +0100)]
Display the reserved memory too in node lists
This is useful and not easy to compute otherwise.
Iustin Pop [Thu, 12 Mar 2009 19:31:57 +0000 (20:31 +0100)]
First try to embed VCS id in binaries
This patch attempts to embed the VCS id in binaries, based on the way
other projects seem to do this.
Iustin Pop [Wed, 11 Mar 2009 08:22:45 +0000 (09:22 +0100)]
Fix the Makefile clean rule
This removes obsolete entries from the clean rule and adds the hbal
binary.
Iustin Pop [Wed, 11 Mar 2009 08:12:11 +0000 (09:12 +0100)]
Change the N1 score to percent of N1 failures
Since for a very many N+1 failures in a cluster, we could actually
degrade the N1 CV by making a node N+1 compliant, we need to make sure
this value only decreases when fixing non-compliant nodes.
The easiest way is to compute the N+1 score as a percentage of failed
nodes, with the caveat that the domain of values might not be fully
compatible with the other scores. It is still [0, 1] but does not vary
like the others.
Iustin Pop [Wed, 11 Mar 2009 08:08:31 +0000 (09:08 +0100)]
Add two new variables in the cluster score
This patch adds two new variables to the cluster score:
- variance of the failN1 attribute
- variance of the reserved memory percentage
The variance of the failN1 helps make the cluster N+1 happy, whereas the
reserved memory percentage helps balance the unused memory for
redundancy on the nodes.
Iustin Pop [Wed, 11 Mar 2009 08:07:06 +0000 (09:07 +0100)]
Add the node reserved memory percentage
This patch adds the node attribute “reserved memory percentage” that is
derived from the maximum reserved memory for a node and its total
memory.
This will be useful for enhancing the balancing algorithm.
Iustin Pop [Wed, 11 Mar 2009 07:14:56 +0000 (08:14 +0100)]
Record the running cluster CV in placements
This patch adds a score variable to the placement type, so we can record
the changes in the cluster CV for later display.
This gives visibility in the decrease of the parameters and can show
which are the most important steps to perform (out of the full move
list).
Iustin Pop [Wed, 11 Mar 2009 07:13:18 +0000 (08:13 +0100)]
Also print cluster coefficients in hn1
This patch adds printing the initial and final cluster coefficients in
hn1 too, to better understand the found solution.
Iustin Pop [Tue, 10 Mar 2009 20:20:06 +0000 (21:20 +0100)]
Beautify the cluster status list
This patch removes the primary/secondary instance lists from the node
status and also removes the tabbed formatting with explicit width
formatting.
Iustin Pop [Tue, 10 Mar 2009 19:35:01 +0000 (20:35 +0100)]
Beautify solution list
This patch makes the tabular solution list nicer, by changing from tabs
to explicit widths.
Iustin Pop [Tue, 10 Mar 2009 18:59:50 +0000 (19:59 +0100)]
Limit string literals to 80-char columns
Learned how multi-line string literals work in Haskell :)
Iustin Pop [Mon, 9 Mar 2009 20:47:48 +0000 (21:47 +0100)]
Add a news file and make the 0.0.5 release
Iustin Pop [Mon, 9 Mar 2009 20:37:39 +0000 (21:37 +0100)]
Beautify: strip common suffix from names
This patch automatically removes the longest common (domain, i.e.
starting with a dot) suffix from the node and instance names. This gives
a much clearer display, and this format is compatible with the way
Ganeti accepts shortened names.
Iustin Pop [Mon, 9 Mar 2009 19:50:08 +0000 (20:50 +0100)]
hbal: allow, but warn on, N+1 failed clusters
Based on the node changes, we remove the N+1 check and only show a
warning instead.
Iustin Pop [Mon, 9 Mar 2009 19:46:24 +0000 (20:46 +0100)]
Change the node N+1 check model
Currently, we fail a new instance placement if the new node status is
not N+1 compliant. This means that an allocation on an already N+1
failed node still fails, even though (conceptually) we're not worse than
before.
This patch changes this model to fail the allocation *only* if the node
was N+1 compliant before. This allows balancing to work on non-N+1 happy
clusters, with the caveat that they probably won't be N+1 happy at the
end.
Since we skip N+1 check in some cases, we add a new “failHealth” check
that verifies the node still has strict positive free memory and disk
space.
Iustin Pop [Mon, 9 Mar 2009 19:33:13 +0000 (20:33 +0100)]
Show which nodes are not N+1 compliant in output
This patch adds a '*' character to nodes which are not N+1 compliant to
the output, to help with understanding pre- and post-changes cluster
status.
Iustin Pop [Sun, 22 Feb 2009 12:20:00 +0000 (13:20 +0100)]
Don't build documentation for the Main modules
This fixes the doc issue which exists since the addition of hbal. Now
make doc makes sense again.
Iustin Pop [Sun, 22 Feb 2009 12:18:52 +0000 (13:18 +0100)]
Change the total disk/mem to Double
Since we only use the totals for computations, and we always convert
them via fromIntegral, let's just store them directly as Doubles.
Iustin Pop [Sun, 22 Feb 2009 12:15:12 +0000 (13:15 +0100)]
A no-code change s/disk/dsk/
This just makes indendation nicer in many expressions.
Iustin Pop [Sun, 22 Feb 2009 12:05:08 +0000 (13:05 +0100)]
Compute the p_mem / p_dsk statically
This patch changes the computation of p_mem / p_dsk from on-demand
(whenever the cluster stats are computed) to after-modify (after a node
is modified, we update its stats). This brings a god speed-up as only
one node or two are usually changed between cluster-wide stats are
computed.
Iustin Pop [Sun, 15 Feb 2009 13:53:38 +0000 (14:53 +0100)]
Documentation updates
Iustin Pop [Sun, 15 Feb 2009 13:48:39 +0000 (14:48 +0100)]
Simplify the checkInstanceMove function
This patch flattens the two folds into one, by simply building the whole
list of moves instead of the double recursion (nodes and the each
node's moves). This has no functional change, but it's much cleaner.
Iustin Pop [Sun, 15 Feb 2009 13:40:42 +0000 (14:40 +0100)]
A small optimization in node computation
Currently we always compute the available node list for moves (for an
instances) based on the nodes of the initial table. This works find,
however is a repeated calculation.
We optimize this by passing a node list (of indexes, not full objects),
which helps in two ways:
- faster to filter later
- allows restriction of target nodes by enforcing only this subset as
target for moves
Iustin Pop [Sun, 15 Feb 2009 13:40:13 +0000 (14:40 +0100)]
Container: add a 'keys' function
Iustin Pop [Sun, 15 Feb 2009 13:35:53 +0000 (14:35 +0100)]
Replace a foldl by foldl'
Iustin Pop [Sun, 15 Feb 2009 13:10:41 +0000 (14:10 +0100)]
Split checkMove into two
This cleans up and splits the individual instance move into a separate function.
Iustin Pop [Sat, 14 Feb 2009 21:22:26 +0000 (22:22 +0100)]
Change the balancing algorithm
This patch changes the balancing algorithm to not iterate linearly over
the instances (in a random, but fixed order), instead selecting at each
step the best next move. This should allow a better score (most of the
time), and usually also a shorter solution.
Iustin Pop [Sat, 14 Feb 2009 08:05:06 +0000 (09:05 +0100)]
Add RAPI support to hn1
This patch moves a function to Utils and changes hn1 to be able to take
data from RAPI.
Iustin Pop [Sat, 14 Feb 2009 08:00:56 +0000 (09:00 +0100)]
Implement oneline-output for hbal
Iustin Pop [Sat, 14 Feb 2009 07:51:15 +0000 (08:51 +0100)]
Do not try both http and https against the server
This patch changes the tryRapi function so that if the http request
succeeded, we don't try https too.
Iustin Pop [Sat, 14 Feb 2009 07:46:16 +0000 (08:46 +0100)]
Simplify some JSON transforms
... hopefully this is more clear.
Iustin Pop [Fri, 13 Feb 2009 21:26:23 +0000 (22:26 +0100)]
Add compatibility with rapi v1
The patch adds compatibility with RAPI v1, and this required some new
JSON functions as valFromObj doesn't behave nicely.
Some other unrelated changes were done too.
Iustin Pop [Fri, 13 Feb 2009 08:28:57 +0000 (09:28 +0100)]
Implement reading data from RAPI v2
Iustin Pop [Fri, 13 Feb 2009 08:27:55 +0000 (09:27 +0100)]
Some more utility functions
Iustin Pop [Fri, 13 Feb 2009 08:26:13 +0000 (09:26 +0100)]
Fix a bug in Cluster.fixNodes
We need to lookup the moving accumulator, of course.
Iustin Pop [Thu, 12 Feb 2009 20:14:17 +0000 (21:14 +0100)]
Make RAPI return the same data format as gnt-*
This patch changes the RAPI endpoint return the same data format as the
input files. This will allow using it instead of the files.
Iustin Pop [Thu, 12 Feb 2009 19:55:51 +0000 (20:55 +0100)]
Change the input file formats
This patch changes the format of the input node and instance lists. It
removes the list of primary and secondary instances from the nodes, and
adds the primary and secondary nodes to the instance list.
This is done so that we can have the same input data from commands as
from the RAPI.
Iustin Pop [Wed, 11 Feb 2009 20:37:42 +0000 (21:37 +0100)]
Initial support for reading from RAPI
Iustin Pop [Wed, 28 Jan 2009 11:09:09 +0000 (12:09 +0100)]
Initial import
This is the initial import of release 0.0.3.