Installation
============
-This guide describes the standard installation process for kamaki, with the aspiration of covering as much cases as possible. Although kamaki was initially targeted to advanced Linux/Unix-like users, it should be quite straightforward to install and have it up and running in most popular platforms.
+This guide describes the standard installation process for kamaki, with the
+aspiration of covering as much cases as possible. Although kamaki was initially
+targeted to Linux/Unix-like users, it is quite straightforward to install and
+have it up and running in all platforms running python 2.6 or 2.7.
* Kamaki repository: `http://code.grnet.gr/git/kamaki <http://code.grnet.gr/git/kamaki>`_
-* Synnefo Linux packages: `http://apt2.dev.grnet.gr <http://apt2.dev.grnet.gr>`_
+* Kamaki at pypi: `http://pypi.python.org/pypi/kamaki <https://pypi.python.org/pypi/kamaki>`_
-Linux and Unix-like enviroments
--------------------------------
+* Synnefo Linux packages: `http://apt.dev.grnet.gr <http://apt.dev.grnet.gr>`_
+
+Linux and Unix-like environments
+--------------------------------
Debian:
^^^^^^^
* As root, append the following to */etc/apt/sources.list* ::
- deb http://apt2.dev.grnet.gr stable/
+ deb http://apt.dev.grnet.gr wheezy/
+
+.. warning:: Debian Squeeze users may replace "wheezy" with "squeeze"
-* Make sure the GPG public key for the GRNET dev team is added:
+* Make sure the GPG public key for the Synnefo development team is added:
.. code-block:: console
$ sudo apt-get install kamaki
-Install ansicolors and/or progress (Optional but recommended)
-"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
+Install ansicolors (optional but recommended)
+"""""""""""""""""""""""""""""""""""""""""""""
.. code-block:: console
$ sudo apt-get install python-ansicolors
- $ sudo apt-get install python-progress
-.. _installing-from-source-ref:
+Install mock (for developers only)
+""""""""""""""""""""""""""""""""""
+
+.. code-block:: console
+
+ $ sudo apt-get install python-mock
+
+.. warning:: kamaki.clients unit-tests need python-mock 1.X or better. e.g.::
+
+ $ sudo apt-get install python-mock=1.0.1
-Installing from source (git repos.)
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+.. hint:: To activate functional tests in kamaki. enable the preconfigured
+ *livetest* command group:
+
+ .. code-block:: console
+
+ $ kamaki config set livetest_cli livetest
+
+
+Install astakosclient (optional)
+""""""""""""""""""""""""""""""""
+
+A seperate project called
+`astakosclient <https://pypi.python.org/pypi/astakosclient>`_ can be used for
+advanced user and service management.
+
+.. code-block:: console
+
+ $ apt-get install python-astakosclient
+
+.. hint:: To activate astakosclient commands in kamaki, enable the
+ preconfigured *astakos* command group:
+
+ .. code-block:: console
+
+ $ kamaki config set astakos_cli astakos
+
+.. _installing-from-pypi-ref:
+
+Installing from pypi
+^^^^^^^^^^^^^^^^^^^^
Requirements
""""""""""""
Essential:
- * Python 2.6 or better [http://www.python.org]
+ * Python 2.6 or 2.7 [http://www.python.org]
* Python setuptools [http://pypi.python.org/pypi/setuptools]
Optional:
Setup a virtual enviroment (optional)
"""""""""""""""""""""""""""""""""""""
-With virtualenv users can setup kamaki and synnefo services in a sandbox environment.
+With virtualenv users can setup kamaki and synnefo services in a sandbox
+environment.
.. code-block:: console
$ virtualenv kamaki-env
$ source kamaki-env/bin/activate
-A more detailed example of using virtual env can be found at the `snf-image-creator setup guide <http://docs.dev.grnet.gr/snf-image-creator/latest/install.html#python-virtual-environment>`_
-
-Install objpool (was: snf-common)
-"""""""""""""""""""""""""""""""""
+A more detailed example of using virtual env can be found at the
+`snf-image-creator setup guide <http://www.synnefo.org/docs/snf-image-creator/latest/install.html#python-virtual-environment>`_
-Kamaki is based on python-objpool. The objpool package is easy to install from source, even on windows platforms:
+Install kamaki
+""""""""""""""
.. code-block:: console
- $ git clone http://code.grnet.gr/git/objpool
- $ cd objpool
- $ ./setup build install
- $ cd -
+ $ pip install kamaki
-Install kamaki
-""""""""""""""
+Install ansicolors
+""""""""""""""""""
-Kamaki can be downloaded from `this location <https://code.grnet.gr/projects/kamaki/files>`_, where users can pick the version they prefer and unzip it locally:
+The **ansicolors** package is not required for running kamaki, but it is
+recommended as a user experience improvement. In specific, ansicolors
+adds colors to kamaki responses.
.. code-block:: console
- $ tar xvfz kamaki-0.7.tar.gz
+ $ pip install ansicolors
+
+Install mock (developers only)
+""""""""""""""""""""""""""""""
-or it can be downloaded directly from the git repository:
+The **mock** package is needed for running the prepared unit-tests in the
+kamaki.clients package. This feature is useful when extending / debugging
+kamaki functionality and is aimed to kamaki developers and contributors.
+Therefore, users can enjoy the full kamaki user experience without installing
+mock.
.. code-block:: console
- $ git clone http://code.grnet.gr/git/kamaki
+ $ pip install mock
-and then installed by the setup script:
+.. warning:: mock version >= 1.X
-.. code-block:: console
+.. hint:: To activate functional tests in kamaki. enable the preconfigured
+ *livetest* command group:
- $ cd kamaki
- $ ./setup build install
+ .. code-block:: console
-Install progress and/or ansicolors (optional)
-"""""""""""""""""""""""""""""""""""""""""""""
+ $ kamaki config set livetest_cli livetest
-progress: command-line progress bars (in some commands)
+Install astakosclient
+"""""""""""""""""""""
-ansicolors: color kamaki output (can switched on and off in `setup <setup.html>`_)
+A seperate project called
+`astakosclient <https://pypi.python.org/pypi/astakosclient>`_ can be used for
+advanced user and service management.
.. code-block:: console
- $ pip install progress
- $ pip install ansicolors
+ $ pip install astakosclient
+
+.. hint:: To activate astakosclient commands in kamaki, enable the
+ preconfigured *astakos* command group:
+
+ .. code-block:: console
+
+ $ kamaki config set astakos_cli astakos
Mac OS X
--------
-Kamaki can be installed on Mac OS X systems from source, by following the steps at :ref:`installing-from-source-ref`.
+Kamaki can be installed on Mac OS X systems from source, by following the steps
+at :ref:`installing-from-pypi-ref`.
Windows
-------
-Kamaki can run on Windows, either on standard Windows console, or inside an improved command line shell. The present guide presents a tested method for setting up kamaki in windows
+Kamaki can be installed on Windows by following the pypi method. Installing the
+requirements is a bit different than in other systems.
+
+The full process is detailed in the following:
Requirements
^^^^^^^^^^^^
* Python 2.7 or better (`Official versions <http://www.python.org/getit>`_)
-* Git (download `windows version <http://git-scm.com/download/win>`_)
-
* Setuptools (`Official versions and workarounds <http://pypi.python.org/pypi/setuptools>`_)
-Installation from source
-^^^^^^^^^^^^^^^^^^^^^^^^
+Users who have already set up and wokring python and setuptools (e.g. for
+another project) may skip python and / or setup tools installation.
Install python
-""""""""""""""
+^^^^^^^^^^^^^^
-Download and run the Windows installer from `here <http://www.python.org/getit>`_
+Download and run the Windows installer from
+`here <http://www.python.org/getit>`_
-Users should pick the installer that fits their windows version and architecture.
+Users should pick the installer that fits their windows version and machine
+architecture.
Add python to windows path
-""""""""""""""""""""""""""
+^^^^^^^^^^^^^^^^^^^^^^^^^^
-The following will allow users to run python and python scripts from command line.
+The following will allow users to run python and python scripts from command
+line.
-* Select **System** from the Control Panel, select the **Advanced** tab, the **Environment Variables** button and then find the **PATH** (user or system) and **edit**
+* Select **System** from the Control Panel, select the **Advanced** tab, the
+ **Environment Variables** button and then find the **PATH** (user or
+ system) and **edit**
* Without removing existing values, append the following to PATH::
- C:\Python;C:\Python\Scripts
+ ;C:\Python27;C:\Python27\Scripts
.. note:: Path values are separated by semicolons
-.. warning:: C:\\Python should be replaced with the actual python path in the system, e.g. C:\\Python27
+.. warning:: In case of a different version, C:\\Python27 should be replaced
+ with the actual python path in the system
Install setuptools
-""""""""""""""""""
+^^^^^^^^^^^^^^^^^^
-According to the corresponding `python org page <http://pypi.python.org/pypi/setuptools>`_, the setuptools installer doesn't currently work on 64bit machines.
+According to the corresponding
+`python org page <http://pypi.python.org/pypi/setuptools>`_, the setuptools
+installer doesn't currently work on 64bit machines.
-* Users with 32-bit operating systems should download and run the graphic installer
+* Users with 32-bit operating systems should download and run the graphic
+ installer
-* Users with 64-bit machines should download the `ez_setup.py <http://peak.telecommunity.com/dist/ez_setup.py>`_ script and install it from a command shell. In the following example, the script was downloaded at C:\\Downloads::
+* Users with 64-bit machines should download the
+ `ez_setup.py <http://peak.telecommunity.com/dist/ez_setup.py>`_ script and
+ install it from a command shell. In the following example, the script was
+ downloaded at C:\\Downloads::
- C:\> cd Downloads
- C:\Downloads\> python ez_setup.py
- ...
- Installation finished
- C:\Downloads\>
-
-Install GIT
-"""""""""""
-
-`Download GIT <http://git-scm.com/download/win>`_ and run the graphic installer. During the installation, users will be able to modify some installation options. The present guide is tested with the default selections.
-
-After the installation is completed, a GIT standalone shell will be installed (a desktop shortcut is created, by default). Users are advised to run kamaki through this shell.
+ C:\> cd Downloads
+ C:\Downloads\> python ez_setup.py
+ ...
+ Installation finished
+ C:\Downloads\>
Install kamaki
-""""""""""""""
-
-* Run the GIT standalone shell
-
-* Enter the location where kamaki will be installed, e.g. **C:\\**
-
- .. code-block:: console
-
- $ cd /c/
+^^^^^^^^^^^^^^
-* Download source from GRNET repository
-
- .. code-block:: console
-
- $ git clone http://code.grnet.gr/git/kamaki
- Cloning into 'kamaki'...
- Receiving objects: ...
- Resolving Deltas: ...
-
-* Enter source and install kamaki
-
- .. code-block:: console
-
- $ cd kamaki
- $ python setup.py install
- running install
- ...
- Finished processing dependencies for kamaki==0.7
+.. code-block:: console
- $ kamaki --version
+ $ easy_install kamaki