Add vif-custom script and split kvm-vif-bridge
[snf-network] / kvm-vif-bridge
index 229c0bc..fd970ad 100755 (executable)
 # This is an example of a Ganeti kvm ifup script that configures network
 # interfaces based on the initial deployment of the Okeanos project
 
-TAP_CONSTANT_MAC=cc:47:52:4e:45:54 # GRNET in hex :-)
-MAC2EUI64=/usr/bin/mac2eui64
-NFDHCPD_STATE_DIR=/var/lib/nfdhcpd
+source /etc/default/snf-network
+source /usr/lib/snf-network/common.sh
 
-function clear_routed_setup_ipv4 {
+FROM=FROM${INTERFACE^^}
+TO=TO${INTERFACE^^}
 
- arptables -D OUTPUT -o $INTERFACE --opcode request -j mangle
- while ip rule del dev $INTERFACE; do :; done
- iptables -D FORWARD -i $INTERFACE -p udp --dport 67 -j DROP
-
-}
-
-function clear_routed_setup_ipv6 {
-
- while ip -6 rule del dev $INTERFACE; do :; done
-
-}
-
-
-function clear_routed_setup_firewall {
-
-  for oldchain in protected unprotected limited; do
-    iptables  -D FORWARD -o $INTERFACE -j $oldchain
-    ip6tables -D FORWARD -o $INTERFACE -j $oldchain
-  done
-
-}
-
-function clear_ebtables {
-
-  ebtables -D FORWARD -i $TAP -j $FROM
-  ebtables -D FORWARD -o $TAP -j $TO
-  #ebtables -D OUTPUT -o $TAP -j $TO
-
-  ebtables -X $FROM
-  ebtables -X $TO
-}
-
-
-
-function routed_setup_ipv4 {
-
-       # mangle ARPs to come from the gw's IP
-       arptables -A OUTPUT -o $INTERFACE --opcode request -j mangle --mangle-ip-s    "$NETWORK_GATEWAY"
-
-       # route interface to the proper routing table
-       ip rule add dev $INTERFACE table $TABLE
-
-       # static route mapping IP -> INTERFACE
-       ip route replace $IP proto static dev $INTERFACE table $TABLE
-
-       # Enable proxy ARP
-       echo 1 > /proc/sys/net/ipv4/conf/$INTERFACE/proxy_arp
-}
-
-function routed_setup_ipv6 {
-       # Add a routing entry for the eui-64
-       prefix=$NETWORK_SUBNET6
-       uplink=$PUBLIC_VLAN
-       eui64=$($MAC2EUI64 $MAC $prefix)
-
-
-       ip -6 rule add dev $INTERFACE table $TABLE
-       ip -6 ro replace $eui64/128 dev $INTERFACE table $TABLE
-       ip -6 neigh add proxy $eui64 dev $uplink
-
-       # disable proxy NDP since we're handling this on userspace
-       # this should be the default, but better safe than sorry
-       echo 0 > /proc/sys/net/ipv6/conf/$INTERFACE/proxy_ndp
-}
-
-# pick a firewall profile per NIC, based on tags (and apply it)
-function routed_setup_firewall {
-       ifprefix="synnefo:network:$INTERFACE_INDEX:"
-       for tag in $TAGS; do
-               case ${tag#$ifprefix} in
-               protected)
-                       chain=protected
-               ;;
-               unprotected)
-                       chain=unprotected
-               ;;
-               limited)
-                       chain=limited
-               ;;
-               esac
-       done
-
-       if [ "x$chain" != "x" ]; then
-               iptables  -A FORWARD -o $INTERFACE -j $chain
-               ip6tables -A FORWARD -o $INTERFACE -j $chain
-       fi
-}
-
-function init_ebtables {
-
-  ebtables -N $FROM
-  ebtables -A FORWARD -i $TAP -j $FROM
-  ebtables -N $TO
-  ebtables -A FORWARD -o $TAP -j $TO
-
-}
-
-
-function setup_ebtables {
-
-  # do not allow changes in ip-mac pair
-  if [ -n "$IP"]; then
-    ebtables -A $FROM --ip-source \! $IP -p ipv4 -j DROP
-  fi
-  ebtables -A $FROM -s \! $MAC -j DROP
-  #accept dhcp responses from host (nfdhcpd)
-  ebtables -A $TO -p ipv4 --ip-protocol=udp  --ip-destination-port=68 -j ACCEPT
-  # allow only packets from the same mac prefix
-  ebtables -A $TO -s \! $MAC/$MAC_MASK -j DROP
-}
-
-function setup_masq {
-
-  # allow packets from/to router (for masquerading)
-  # ebtables -A $TO -s $NODE_MAC -j ACCEPT
-  # ebtables -A INPUT -i $TAP -j $FROM
-  # ebtables -A OUTPUT -o $TAP -j $TO
-  return
-
-}
-
-function setup_nfdhcpd {
-       umask 022
-  FILE=$NFDHCPD_STATE_DIR/$INTERFACE
-  #IFACE is the interface from which the packet seems to arrive
-  #needed in bridged mode where the packets seems to arrive from the
-  #bridge and not from the tap
-       cat >$FILE <<EOF
-INDEV=$INDEV
-IP=$IP
-MAC=$MAC
-HOSTNAME=$INSTANCE
-TAGS="$TAGS"
-GATEWAY=$NETWORK_GATEWAY
-SUBNET=$NETWORK_SUBNET
-GATEWAY6=$NETWORK_GATEWAY6
-SUBNET6=$NETWORK_SUBNET6
-EUI64=$($MAC2EUI64 $MAC $NETWORK_SUBNET6 2>/dev/null)
-EOF
-
-}
-
-
-DEFAULT=/etc/default/snf-network
-source $DEFAULT
-source $CONF
-
-INFRA=$STATE_DIR/infra
-
-source $INFRA
-
-log-env
-
-TAP=$INTERFACE
-FROM=FROM${TAP^^}
-TO=TO${TAP^^}
-
-clear_routed_setup_ipv4 > /dev/null 2>&1
-clear_routed_setup_ipv6 > /dev/null 2>&1
-clear_routed_setup_firewall > /dev/null 2>&1
-clear_ebtables > /dev/null 2>&1
+try clear_routed_setup_ipv4
+try clear_routed_setup_ipv6
+try clear_routed_setup_firewall
+try clear_ebtables
+try clear_nfdhcpd
 
 if [ "$MODE" = "routed" ]; then
   TABLE=$LINK
@@ -180,28 +24,28 @@ elif [ "$MODE" = "bridged" ]; then
   ip link set $INTERFACE up
   brctl addif $BRIDGE $INTERFACE
   INDEV=$BRIDGE
-  init_ebtables > /dev/null 2>&1
+  try init_ebtables
   DROPDHCPREQCMD="ebtables -A $FROM -p ipv4 --ip-protocol udp --ip-destination-port 67 -j DROP"
 fi
 
 
 for tag in $NETWORK_TAGS; do
   case $tag in
-  ip-less-routed)
-    routed_setup_ipv4 > /dev/null 2>&1
-    routed_setup_ipv6 > /dev/null 2>&1
-    routed_setup_firewall > /dev/null 2>&1
+  $IP_LESS_ROUTED_TAG)
+    try routed_setup_ipv4
+    try routed_setup_ipv6
+    try routed_setup_firewall
   ;;
-  nfdhcpd)
+  $NFDHCPD_TAG)
     # Drop unicast BOOTP/DHCP packets
-    $DROPDHCPREQCMD > /dev/null 2>&1
-    setup_nfdhcpd > /dev/null 2>&1
+    $DROPDHCPREQCMD
+    try setup_nfdhcpd
   ;;
-  mac-filtered)
-    setup_ebtables > /dev/null 2>&1
+  $MAC_FILTERED_TAG)
+    try setup_ebtables
   ;;
-  masq)
-    setup_masq > /dev/null 2>&1
+  $MASQ_TAG)
+    try setup_masq
   ;;
   esac
 done