Fix Xen soft reboot via polling
This patch fixes the Xen soft reboot ("xm reboot") via polling for a specifictime for either changed domain ID or decreased CPU run-time.
This sould prevent the race-conditions discussed on the mailing list forreboots....
kvm: use the correct vnc bind address
There is a bug in kvm, when binding vnc to a specific address theconstant 'vnc_bind_address' is passed in, instead of the actualrequested address. This patch fixes it.
Reviewed-by: iustinp
Xen: Remove one hardcoded constant
s/"vnc_bind_address"/constants.HV_VNC_BIND_ADDRESS/
Reviewed-by: imsnah
Use EnsureDirs in KVM as well.
The KVM hypervisor has also code to ensure a list of directories exist.Substitute it with our new utils function.
Fix xen-hvm and KERNEL_ARGS
xen-hvm doesn't have KERNEL_ARGS, and I just changed blindly all oldextra_args to HV_KERNEL_ARGS. This makes xen-hvm work again.
Remove the extra_args parameter in instance start
This patch removes the extra_args parameter and instead switches theinstance to the HV_KERNEL_ARGS hypervisor option.
This is a big change, but it's a needed cleanup, this extra parameter onall RPC calls is not generic and we also need to have a persistent value...
Simplify a little the hypervisor routines
Instead of “instance.hvparams”, we use a shorter “hvp” name to make readabilitybetter.
Show more details for failed xen commands
This patch also logs the output of the xm commands in case of failures;some corner cases were forgotten in the last redo.
Some small improvements to the fake hypervisor
This patch modifies the fake hypervisor to substract the memory “used”by “running” instances from the free memory, so the actual nodeinformation changes based on the running instances.
Also some style changes and fixes are added....
Some small fixes
This patch removes the admin_ram LUQueryInstances field (is brokenanyway) and fixes the VNC address checks in the Xen Hypervisor.
KVM: Correct CheckParameterSyntax docstring
The comment is not really true anymore, as we have a lot of parametersnowadays.
KVM: Fix _CallMonitorCommand error message
1) Only instance_name is available2) There was a missing string parameter
KVM: Add usb mouse type parameter
In some cases 'mouse' may work better than 'tablet', so we'll handleboth by allowing the user to specify a parameter. By default no mouse isused.
KVM: allow netboot
With this patch we allow KVM instances to be booted off the network.The only issue is that this is not compatible with virtio nics, sowe disallow them, when booting from the net.
KVM: actually support different nic types
When executing the KVM runtime we load the nic type from the runtimehvparams and use it to specify the nic model type. As for the disk wetranslate the DEV_PARAVIRTUAL type to 'virtio'.
KVM: export hvparams in the runtime
They'll be used to set the nic type when we execute the runtime, sincethe nics are processed later. We need to save the hvparams because wewant to use the same one as when we saved the runtime, rather than usethe current instance ones, to avoid applying only some changed...
KVM: actually support different disk types
By passing the relevant if= value to the disk we support different disktypes. The only change is that we'll translate "paravirtual" to"virtio" to keep only one "paravirtualized" value, around ganeti. Theif= value is calculated outside the disks loop, as it's the same for all...
Xen-HVM: Improve the invalid disk/nic type error
Copy the message from the KVM one, adding a missing 'the' and a list ofpossible values, to help the user in his decision.
KVM: parameters for different disk and nic types
- Add a bunch of NICs and DISKs types- Specify which one are valid disks and nics for KVM (the new ones toghether with some of the old ones)- Add the default values (paravirtual)- Allow the disk and nic types as parameters and check their validity...
Rename the device type constants
These are not HVM specific, so have been given an HT generic name.
s/HT_HVM_VNC_BASE_PORT/VNC_BASE_PORT/g
The VNC base port has nothing to do with HVM itself, and is general toVNC itself, so we're removing the HT_HVM prefix to the constant.
Export the cpu nodes and sockets from Xen
This is a hand-picked forward patch of commit 1755 on the 1.2 branch(hand-picked since the trees diverged too much since then):
The patch changed the xen hypervisor to compute the number of cpu sockets/nodes and enables the command line and the RAPI to show this...
KVM: don't boot from a virtio cdrom
Apparently it's not supported. Also add -boot command line parametersto kvm, since they seem to help booting from the right place. Everythingwill still only work when not using a kernel, but well... :)
KVM: don't boot from cdrom with no cdrom
Support cdrom image and boot order for KVM
The cdrom image has the same meaning than in Xen HVM, and so doesboot_order, even though it has a slightly different syntax, and uses thevalue 'disk' too boot from disk and 'cdrom' to boot from cdrom.
Get rid of constants.HT_HVM_DEFAULT_BOOT_ORDER
Confusingly, as a leftober from 1.2, there was aconstants.HT_HVM_DEFAULT_BOOT_ORDER constant, with a value opposite tothe default HV_BOOT_ORDER hv param that got enabled only ifHV_BOOT_ORDER was set to None. Since setting it to None is very...
KVM: add VNC TLS and X509 parameters
With this parameters VNC for KVM is able to be protected by tls,optionally with an x509 certificate, and optionally verifying theclient as well. Additionally in this patch we limit the bind address tobeing a directory, rather than a file or a directory, for simplicity, as...
KVM: allow binding vnc to a file
Before we forced the VNC_BIND_ADDRESS to be an ip. Now we also accept apath, and bind the instance to it, or to a file in it if it's adirectory.
KVM: Make GetAllInstancesInfo concurrency-safe
Or actually more so. If this function gets called while instances getshut down, it might try to report information on instances which don'texits. Try to fail gracefully if that happens, by just skipping an...
KVM: advise about VNC support on GetShellCommand
KVM: enable VNC if a VNC_BIND_ADDRESS is defined
We'll also enable a tablet usb device, as suggested by the kvm man page.
KVM: Allow the HV_VNC_BIND_ADDRESS parameter
KVM: make the kernel and initrd arguments optional
Under KVM we don't strictly need a kernel and initrd. If some are passedwe'll use them, otherwise the guest OS will need to behave as fullynative, and have its own boot loader and kernel.The root_path hypervisor parameter becomes mandatory only if a kernel is...
KVM: add the HV_SERIAL_CONSOLE parameter
Up until now a KVM instance was forced to have a serial port.With this change this is no longer mandatory, by default we'll use one,but if the HV_SERIAL_CONSOLE parameter is set to False we'll do without.
GetShellCommand: get hvparams and beparams
Sometimes the hypervisor will use the instance hv and/or be parametersto determine the best shell command. This is not possible, though,currently, as the instance hv/beparams are not filled, so we have topass the filled versions separately....
Actually mark drives as read-only if so configured
This patch correctly marks the drives as read-only for Xen, and raisesand exception for KVM since it doesn't support read-only drives.
Reviewed-by: ultrotter
Xen: use utils.WriteFile for the instance configs
Also raise HypervisorError rather than OpExecError.
Xen: use utils.Readfile to read the VNC password
KVM and Xen: add the HV_ROOT_PATH parameter
This parameter allows a different path to be passed to the instancekernel. The new parameter is mandatory, and by default has the value ofthe old hardcoded value for both kvm and xen.
Beta1 clusters will need to have this parameter added for their...
KVM: implement GetShellCommandForConsole
This is a class method, because it calls _InstanceSerial, which isanother class method. The patch changes it to classmethod for all thehypervisor classes.
KVM: classify _Instance{Monitor,Serial,KVMRuntime}
Those methods need nothing from the instantiated class, and justmanipulate strings, and fetch some class global variables, so they canbe classmethods.
Xen and KVM: correct a typo when checking args
A missing 'be' was present in the error string for both xen and kvm,when the kernel or initrd path was not absolute.
KVM live migration: handle failure
If the KVM live migration ends up in a 'failed' state it has beenaborted at the kvm level, and the machine is still running locally.We support also the 'cancelled' state even though there should be no wayof reaching it, without manual intervention....
KVM: change a few IOError with EnvironmentError
KVM: instance migration
The tcp port used for migrating KVM instances is selectable at./configure time. We use a single port as nodes are locked anyway duringa migration, so no two migrations can happen at the same time to thesame node.
KVM: add the _InstancePidAlive function
Throughout the kvm code we very often look for the instance pidfilename, read it, and check if the process is alive. Abstract this into aprivate function and use that one instead.
This patch also changes RebootInstance to check whether the instance is...
KVM: fix RebootInstance
RebootInstance was broken, because it just used to call StartInstancewith wrong parameters. With this patch we still stop the instance, butuse the saved kvm runtime to start it again.
KVM: retry the instance shutdown command
When we ask the instance to shutdown sometimes the command won't work,especially if the instance isn't fully booted up. We'll wait for a bit,and give it a few chances before giving up.
Xen: implement auxiliary migration functions
These are used, for the xen hypervisor, to copy the xen config file tothe remote node. This breaks migration for instances which have beenmigrated, but not restarted, with the old code, for which the configfile was just lost....
Fix some more pylint errors
Two are real errors (invalid names) and one is style error (overridingname from outer scope).
Implement the new live migration backend functions
MigrationInfo, AcceptInstance and AbortMigration are implemented ashypervisor specific functions, and by default they do nothing (asthey're not always necessary).
This patch also converts hv_base.MigrateInstance docstring to epydoc,...
KVM: save and remove the KVM runtime
At instance startup time we save the kvm runtime, and at stop time wedelete it. This patch also includes a function to load the kvm runtime,which is unused yet.
KVM: split KVM runtime generation and startup
Before we used to generate the kvm command line and then just run it.With this patch we split the generation from the time it is run,allowing us to save it and replay it at reboot.
We must take special care about instance nics:...
KVM: add a _CONF_DIR
Currently we keep pid files and control files. In the conf dir we'llalso keep the data to start the instance anew, and the networkinterface scripts. These will then be copied to a separate area (since_CONF_DIR could be mounted 'noexec') and used to start the instance....
KVM: Remove sockets after shutdown
Abstract the monitor and serial socket naming in two functions, andreuse them to cleanup the files after shutdown.
KVM: fix class docstring
Xen: use epydoc in MigrateInstance docstring
Forward port the live migration from 1.2 branch
This is forward port via copy (and not individual patches cherry-pick)of the latest code on the 1.2 branch related to the migration.
The changes compared to 1.2 are the fact that we don't need theIdentifyDisks step anymore (the drbd rpc calls are independent now), and...
Simplify hypervisor block_devices structure
This is a partial forward-port of commit 1136 on the 1.2 branch:
The hypervisor doesn't need to be passed the whole block device structure, so we'll just give it the block device name on the local node, and the name as seen by the instance. This will make it easier to...
Fix some pylint-detected issues
Two bad indentation cases and a missing variable.
KVM: improve socat interface
Call socat with a full path specified at configure time, rather thanjust by its name, and check for the binary to exist at hypervisorverify.
cleanup: xen hypervisor
Wrong indentation and uniformize one method signature.
Reviewed-by: amishchenko
cleanup: kvm code likes to redefine names
Fix epydoc format warnings
This patch should fix all outstanding epydoc parsing errors; as such, weswitch epydoc into verbose mode so that any new errors will be visible.
KVMHypervisor add two missing 'constants.'
Some calls to the HV parameters were missing them.
KVMHypervisor fix to case misspellings
Change Xen hypervisor to not use iv_name
Currently the iv_name is very linux-specific, and will break with themulti-disk changes.
The patch changes this to generate sdX names based on the disk index inthe disks structure, instead of relying on the iv_name....
Convert hv_xen.py to use the logging module
Convert the KVM hypervisor to hvparams
I'm not sure which parameters it should use, I took all I saw in thecode. Update: ultrotter says the list is OK for now.
Change hypervisors to use the beparams
This patch changes the hypervisor functions to use the beparams dictinstead of the instance attributes.
Implement the new hypervisor API in base/xen
This patch adds the new methods CheckParameterSyntax and theValidateParameters in the base and xen hypervisors. It also changes thexen hypervisor to use the new hvparams field on instance.
Sanitize the hypervisor names
Since in 2.0 the user will possibly have more interaction with thehypervisor names, we sanitize them by removing the version numbers(the version can be a prerequisite for the ganeti installation, weshouldn't document it in variable names)....
Move the hypervisor attribute to the instances
This (big) patch moves the hypervisor type from the cluster to theinstance level; the cluster attribute remains as the default hypervisor,and will be renamed accordingly in a next patch. The cluster also gains...
Convert hypervisor
Replacing ssconf with configuration.
Merge r1607 from branches/ganeti/ganeti-1.2
Use a default vnc_bind_address if None is specified
merge r1540 from branches/ganeti/ganeti-1.2
Allow access to HVM serial console
Merge r1536 from branches/ganeti/ganeti-1.2
Add HVM device type flags 2/3
KVM Hypervisor Cleanup
- Remove a few experiemental code lines left as comments- Rework first disks' boot=on addition, which was calculated twice- Remove an empty line- Remove reference to hvm_pae which doesn't apply to kvm
Add KVM hypervisor code
ht_kvm.py contains the code for ganeti to work under kvm.This patch also modifies Makefile.am to ship that file, andlib/hypervisor/__init__.py to import it, and add kvm to thehypervisors map.
FakeHypervisor: fix a function signature
StartInstance takes 'block_devices', not 'force' as its third argument.Even if this is not used in the fake hypervisor it's better to have thecorrect argument name to avoid confusion.
Xen: remove two end-of-line semicolons
It's python, isn't it?
Fix some errors detected by pylint
Use a single Makefile.am instead of many
This change allows us to use cleaner dependencies betweendirectories. The build system is basically rewritten in large partsand may contain bugs.
hypervisor: add live migration support
This is just the hypervisor-level migration (e.g. “xm migrate”) not thewhole node coordination work.
Forward-port: patch 3/4 extended HVM features for 1.2
This patch adds hypervisor support for the extended HVM features.
Author: schreiberalReviewed-by: iustinp
Remove utils.CheckDaemonAlive and use “xm info” instead
There are a couple of reasons for doing so:- /proc is not OS independent, it's only supported by Linux (there are emulations on other systems, but those might differ from the way Linux represents data)....
Use dict instead of if/elif map for hypervisor classes
Rename hypervisor code to lowercase filenames
Add node cpu count to gnt-node list
This patch adds the backend and frontend changes needed for being ableto list the cpu count.
Split hypervisor.py into several files
Before it was a huge file with more than 700 lines. No code changes weremade except for changing imports and class names where needed. In thefuture, we could even think about only importing the hypervisors weactually need. The patch finished QA scripts and distcheck successfully....