Activity
From 03/12/2013 to 04/10/2013
04/09/2013
- 04:00 pm Revision af74db72: migration: set f->is_write and flush in add_to_iovec
- Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com> - 04:00 pm Revision 7ce51f1b: migration: use a single I/O operation when writev_buffer is not defined
- The recent patches to use vectored I/O for RAM migration caused a
regression in savevm speed. To restore previous pe... - 04:00 pm Revision 4d117247: migration: simplify writev vs. non-writev logic
- Check f->iovcnt in add_to_iovec, f->buf_index in qemu_put_buffer/byte.
Signed-off-by: Paolo Bonzini <pbonzini@redhat... - 04:00 pm Revision d9658c47: migration: drop is_write complications
- The same QEMUFile is never used for both read and write. Simplify
the logic to simply look for presence or absence o... - 03:47 pm Revision 93b48c20: virtio-9p: Fix virtio-9p no longer building after hw-dirs branch merge
- Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Message-id: 1365495755-10902-1-git-send-email-hdegoede@redhat.com
...
04/08/2013
- 09:12 pm Revision 47b5264e: Merge remote-tracking branch 'bonzini/hw-dirs' into staging
- # By Paolo Bonzini
# Via Paolo Bonzini
* bonzini/hw-dirs: (35 commits)
hw: move private headers to hw/ subdirectori... - 09:12 pm Revision 1f8010f0: Merge remote-tracking branch 'stefanha/net' into staging
- # By Dmitry Fleytman
# Via Stefan Hajnoczi
* stefanha/net:
vmxnet3: const_cpu_to_le64 wrapping for feature bits dro... - 07:13 pm Revision 5193899a: hw: move GPIO interfaces to hw/gpio/, configure with default-configs/
- Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- 07:13 pm Revision 914e29d2: hw: move NVRAM interfaces to hw/nvram/, configure with default-configs/
- Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- 07:13 pm Revision 54976b75: hw: move hw/kvm/ to hw/i386/kvm
- Peter requested the KVM GIC to be in hw/intc.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> - 07:13 pm Revision 0434e30a: hw: move ARM CPU cores to hw/cpu/, configure with default-configs/
- Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- 07:13 pm Revision aacf8895: hw: move last file to hw/arm/
- Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- 07:13 pm Revision 47b43a1f: hw: move private headers to hw/ subdirectories.
- Many headers are used only in a single directory. These can be
kept in hw/.
Signed-off-by: Paolo Bonzini <pbonzini@... - 07:13 pm Revision 7702e47c: hw: move interrupt controllers to hw/intc/, configure with default-configs/
- Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- 07:13 pm Revision e28bee8e: hw: move other devices to hw/misc/, configure with default-configs/
- Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- 07:13 pm Revision 8d8b636d: MAINTAINERS: update for source code movement
- Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- 07:13 pm Revision d2c0bd84: hw: move DMA controllers to hw/dma/, configure with default-configs/
- Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- 07:13 pm Revision 3bd88451: hw: move timer devices to hw/timer/, configure with default-configs/
- Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- 07:13 pm Revision ba25df88: hw: move VFIO and ivshmem to hw/misc/
- Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- 07:13 pm Revision 47934d0a: hw: move ISA bridges and devices to hw/isa/, configure with default-configs/
- Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- 07:13 pm Revision 80b4ecc8: hw: move more files to hw/xen/
- Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- 07:13 pm Revision c0907c9e: hw: move PCI bridges to hw/pci-* or hw/ARCH
- Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- 07:13 pm Revision 9944d320: hw: move char devices to hw/char/, configure via default-configs/
- Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- 07:13 pm Revision 8ac5c651: hw: move SD/MMC devices to hw/sd/, configure with default-configs/
- Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- 07:13 pm Revision 31e17060: hw: move SSI controllers to hw/ssi/, configure via default-configs/
- Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- 07:13 pm Revision 7b247895: hw: move block devices to hw/block/, configure via default-configs/
- Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- 07:13 pm Revision 34b8f63e: hw: move audio devices to hw/audio/, configure via default-configs/
- Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- 07:13 pm Revision fc97bb5b: hw: move display devices to hw/display/, configure via default-configs/
- Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- 07:13 pm Revision 0ddfaf7f: hw: move MC146818RTC to hw/timer/, configure via default-configs/
- Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- 07:13 pm Revision a100107d: hw: move watchdogs to hw/watchdog, configure via default-configs/
- Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- 07:13 pm Revision 53ed424e: hw: move I2C controllers to hw/i2c/, configure via default-configs/
- Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- 07:13 pm Revision d7e35d4a: hw: move NICs to hw/net/, configure via default-configs/
- Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- 07:13 pm Revision 53a55002: hw: move SCSI controllers to hw/scsi/, configure via default-configs/
- Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- 07:13 pm Revision 49ab747f: hw: move target-independent files to subdirectories
- This patch tackles all files that are compiled once, moving
them to subdirectories of hw/.
Signed-off-by: Paolo Bonz... - 07:13 pm Revision ddf2bcfc: hw: make all of hw/pci/ configurable via default-configs/
- Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- 07:13 pm Revision aaa4d1df: hw: make all of hw/usb/ configurable via default-configs/
- Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- 07:13 pm Revision 6e790746: hw: move virtio devices to hw/ subdirectories
- Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- 07:13 pm Revision 9a1179dc: hw: make all of hw/ide/ configurable via default-configs/
- Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- 07:13 pm Revision 1fd6bb44: hw: make subdirectories for devices
- Prepare the new directory structure.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> - 07:13 pm Revision ce3b494c: moxie: configure with default-configs file
- Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- 07:13 pm Revision bb585a78: build: enable using $(CONFIG_FOO) on the rhs of config files
- Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- 07:13 pm Revision 0d09e41a: hw: move headers to include/
- Many of these should be cleaned up with proper qdev-/QOM-ification.
Right now there are many catch-all headers in inc... - 06:38 pm Revision 76ad07a4: configure: Provide and use convenience error reporting function
- Provide a convenience function for reporting an error and exiting,
and update various places in the configure script ... - 06:38 pm Revision 7c2acc70: configure: Don't fall back to gthread coroutine backend
- The gthread coroutine backend is broken and does not produce a working
QEMU; it is only useful for some very limited ... - 06:38 pm Revision 1e885b25: qemu-char: really fix behavior on can_read = 0
- I misread the glib manual, g_source_remove does not let you re-attach
the source later. This behavior (called "block... - 06:37 pm Revision b9a7cfee: Merge remote-tracking branch 'mdroth/qga-pull-4-2-13' into staging
- # By Laszlo Ersek (2) and others
# Via Michael Roth
* mdroth/qga-pull-4-2-13:
qemu-ga: ga_get_fd_handle(): abort if... - 06:36 pm Revision 2a7a239f: Merge remote-tracking branch 'kraxel/usb.79' into staging
- # By Gerd Hoffmann (7) and Hans de Goede (3)
# Via Gerd Hoffmann
* kraxel/usb.79:
usb-tablet: Don't claim wakeup ca... - 03:01 pm Revision 389dd807: vmxnet3: const_cpu_to_le64 wrapping for feature bits dropped
- Byte swap is redundant because shared memory reading functions
already swap bytes when required
Signed-off-by: Dmitr... - 03:01 pm Revision 3e948fd3: vmxnet3: iPXE compatibility fixes
- iPXE vmxnet3 driver makes a few assumptions regarding device operation
that were missed during testing with Linux and...
04/06/2013
- 03:53 pm Revision 9196dd41: Merge branch 'arm-devs.next' of git://git.linaro.org/people/pmaydell/qemu-arm
- * 'arm-devs.next' of git://git.linaro.org/people/pmaydell/qemu-arm:
hw/nand.c: Fix nand erase operation
cadence_u...
04/05/2013
- 09:35 pm Revision b879f308: tcg-s390: Fix merge error in tgen_brcond
- When the TCG condition codes were re-organized last year,
we failed to update all of the "old-style" tests for unsign... - 09:35 pm Revision 65a62a75: tcg-s390: Cleanup argument shuffling fixme in softmmu code
- Signed-off-by: Richard Henderson <rth@twiddle.net>
- 09:35 pm Revision 0db921e6: tcg-s390: Use load-address for addition
- Since we're always in 64-bit mode, load address performs a full
64-bit add. Use that for 3-address addition, as well... - 09:35 pm Revision 07ff7983: tcg-s390: Remove constraint letters for and
- Since we have a free temporary and can always just load the constant, we
ought to do so, rather than spending the sam... - 09:35 pm Revision f0bffc27: tcg-s390: Use risbgz for andi
- This is immediately usable by the tlb lookup code.
Signed-off-by: Richard Henderson <rth@twiddle.net> - 09:35 pm Revision 78c9f7c5: tcg-s390: Use all 20 bits of the offset in tcg_out_mem
- This can save one insn, if the constant has any bits in 32-63 set,
but no bits in 21-31 set. It never results in mor... - 09:35 pm Revision a4924e8b: tcg-s390: Properly allocate a stack frame.
- Set TCG_TARGET_CALL_STACK_OFFSET properly for the abi. Allocate the
standard TCG_STATIC_CALL_ARGS_SIZE. And while w... - 09:35 pm Revision 3790b918: tcg-s390: Implement add2/sub2 opcodes
- Signed-off-by: Richard Henderson <rth@twiddle.net>
- 09:35 pm Revision d5690ea4: tcg-s390: Implement deposit opcodes
- Signed-off-by: Richard Henderson <rth@twiddle.net>
- 09:35 pm Revision a01fc30d: tcg-s390: Remove useless preprocessor conditions
- We only support 64-bit code generation for s390x.
Don't clutter the code with ifdefs that suggest otherwise.
Signed-... - 09:35 pm Revision 36017dc6: tcg-s390: Implement mulu2_i64 opcode
- Signed-off-by: Richard Henderson <rth@twiddle.net>
- 09:35 pm Revision 96a9f093: tcg-s390: Implement movcond opcodes
- Signed-off-by: Richard Henderson <rth@twiddle.net>
- 09:35 pm Revision a22971f9: tcg-s390: Fix movi
- The code to load the high 64 bits assumed that the insn used to
load the low 64 bits zero-extended. Enforce that. - 08:53 pm Revision 893986fe: main-loop: drop the BQL if the I/O appears to be spinning
- The char-flow refactoring introduced a busy-wait that depended on
an action from the VCPU thread. However, the VCPU ... - 08:53 pm Revision d185c094: qemu-char: eliminate busy waiting on can_read returning zero
- The character backend refactoring introduced an undesirable busy wait.
The busy wait happens if can_read returns zero... - 08:52 pm Revision 91b53e44: Merge remote-tracking branch 'stefanha/trivial-patches' into staging
- # By Peter Crosthwaite (2) and others
# Via Stefan Hajnoczi
* stefanha/trivial-patches:
xilinx_zynq: Cleanup ssi_cr... - 08:52 pm Revision 54baa6f3: Merge remote-tracking branch 'sstabellini/xen-2013-04-05' into staging
- # By Alex Bligh (2) and Felipe Franciosi (2)
# Via Stefano Stabellini
* sstabellini/xen-2013-04-05:
Allow xen guest... - 08:49 pm Revision 5098699a: Merge remote-tracking branch 'kwolf/for-anthony' into staging
- # By Stefan Hajnoczi (4) and Kevin Wolf (3)
# Via Kevin Wolf
* kwolf/for-anthony:
qcow2: Fix L1 write error handlin... - 07:58 pm Revision ae29d6c6: block: keep I/O throttling slice time constant
- It is not necessary to adjust the slice time at runtime. We already
extend the current slice in order to carry over ... - 07:58 pm Revision 0775437f: block: clean up I/O throttling wait_time code
- The wait_time variable is in seconds. Reflect this in a comment and use
NANOSECONDS_PER_SECOND instead of BLOCK_IO_S... - 07:58 pm Revision c2bc78b6: qcow2: Return real error in qcow2_update_snapshot_refcount
- This fixes the error message triggered by the following script:
cat > /tmp/blkdebug.cfg <<EOF
[inject-error]... - 07:58 pm Revision e660fb8b: block: drop duplicated slice extension code
- The current slice is extended when an I/O request exceeds the limit.
There is no need to extend the slice every time ... - 07:58 pm Revision 76534da7: usb-storage: Forward serial number to scsi-disk
- usb-storage takes care to fetch the USB serial number from -drive
options, but it neglected to pass its own 'serial' ... - 07:58 pm Revision c2b6ff51: qcow2: Fix L1 write error handling in qcow2_update_snapshot_refcount
- It ignored the error code, and at least the 'goto fail' is obvious
nonsense as it creates an endless loop (if the nex... - 07:58 pm Revision 5905fbc9: block: fix I/O throttling accounting blind spot
- I/O throttling relies on bdrv_acct_done() which is called when a request
completes. This leaves a blind spot since w... - 07:08 pm Revision 32aea752: hw/nand.c: Fix nand erase operation
- Usually, nand erase operation has only 2 or 3 address cycles.
We need to mask s->addr to zero unset stale high-order ... - 07:03 pm Revision 1db8b5ef: cadence_uart: Flush queued characters on reset
- Reset can be used to empty the rx-fifo. As the fifo full condition is
used to return false from can_receive, queued r... - 06:59 pm Revision fd7f8a99: pl330: Don't inhibit ES bits on INTEN
- This if-else logic inhibits setting of the event status (ES) bits
when interrupts are enabled. This is incorrect. ES ... - 06:47 pm Revision 9246ce88: Allow xen guests to plug disks of 1 TiB or more
- The current xen backend driver implementation uses int64_t variables
to store the size of the corresponding backend d... - 06:45 pm Revision c1a88ad1: Xen PV backend: Disable use of O_DIRECT by default as it results in crashes.
- Due to what is almost certainly a kernel bug, writes with O_DIRECT may
continue to reference the page after the write... - 06:45 pm Revision 86f425db: Xen PV backend: Move call to bdrv_new from blk_init to blk_connect
- This commit delays the point at which bdrv_new (and hence blk_open
on the underlying device) is called from blk_init ... - 06:37 pm Revision 10bb3c62: Introduce 64 bit integer write interface to xenstore
- The current implementation of xen_backend only provides 32 bit integer
functions to write to xenstore. This patch add... - 06:18 pm Revision 2e19a703: hw/arm_gic_common: Use vmstate struct rather than save/load functions
- Update the GIC save/restore to use vmstate rather than hand-rolled
save/load functions.
Signed-off-by: Peter Maydell... - 06:18 pm Revision d8d24fb7: pflash_cfi01: Implement migration support
- Add a vmstate to pflash_cfi01, so that it can be live migrated.
Signed-off-by: Peter Maydell <peter.maydell@linaro.o... - 06:18 pm Revision 5d79b80b: pflash_cfi01: Drop unused 'bypass' field
- For pflash_cfi01 the 'bypass' field is set to zero and never changes,
so remove it (it is a leftover from pflash_cfi0... - 06:17 pm Revision 5f00679e: hw/sd.c: fix migration of dynamically allocated buffer "buf"
- VMSTATE_BUFFER_UNSAFE should be used for buffers inlined in device state, not
for buffers allocated dynamically. Chan... - 06:17 pm Revision b79269b7: hw/onenand.c: fix migration of dynamically allocated buffer "otp"
- VMSTATE_BUFFER_UNSAFE should be used for buffers inlined in device state, not
for buffers allocated dynamically. Chan... - 06:17 pm Revision c3037774: arm_gic: Fix sizes of state fields in preparation for vmstate support
- In preparation for switching to vmstate for migration support, fix
the sizes of various GIC state fields. In particul... - 06:17 pm Revision bd7f92e5: vmstate: Add support for two dimensional arrays
- Add support for migrating two dimensional arrays, by defining
a set of new macros VMSTATE_*_2DARRAY paralleling the e... - 06:17 pm Revision 28092a23: hw/arm_mptimer: Save the timer state
- Add a missing VMSTATE_TIMER() entry to the arm_mptimer vmstate
description; this omission meant that we would probabl... - 06:17 pm Revision 8070568b: vmstate.h: introduce VMSTATE_BUFFER_POINTER_UNSAFE macro
- Macro could be used to migrate a dynamically allocated buffer of known size.
Signed-off-by: Igor Mitsyanko <i.mitsya... - 06:17 pm Revision 591f73f6: hw/arm/nseries: don't print to stdout or stderr
- Remove various bits of printing to stdout or stderr from the
nseries code, replacing it with a qemu log message where... - 06:17 pm Revision e8945b4f: pl050: Don't send always-constant is_mouse field
- The is_mouse field of the pl050 state structure is constant (it tracks
whether this is a 'pl050_keyboard' or 'pl050_m... - 04:55 pm Revision 150a470b: Merge remote-tracking branch 'luiz/queue/qmp' into staging
- # By Luiz Capitulino
# Via Luiz Capitulino
* luiz/queue/qmp:
chardev: drop the Memory chardev driver
hmp: human-m... - 04:04 pm Revision f1922e36: xilinx_zynq: Cleanup ssi_create_slave
- With the recent m25p80 cleanup there is no need to use
ssi_create_slave_no_init() anymore. Just use ssi_create_slave(... - 04:04 pm Revision e641080f: petalogix_ml605_mmu: Cleanup ssi_create_slave()
- With the recent m25p80 cleanup there is no need to use
ssi_create_slave_no_init() anymore. Just use ssi_create_slave(... - 03:54 pm Revision 5b90a866: target-s390: Fix SRNMT
- Fallthough into abort = oops.
Cc: qemu-trivial@nongnu.org
Cc: Alexander Graf <agraf@suse.de>
Signed-off-by: Richard ... - 03:42 pm Revision 4bf0bb80: chardev: drop the Memory chardev driver
- It's not used anymore since the last commit.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Er... - 03:42 pm Revision 48c043d0: hmp: human-monitor-command: stop using the Memory chardev driver
- The Memory chardev driver was added because, as the Monitor's output
buffer was static, we needed a way to accumulate... - 03:42 pm Revision 54d49ac9: qstring: add qstring_get_length()
- Long overdue.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Ac... - 03:42 pm Revision e1f2641b: Monitor: Make output buffer dynamic
- Commit f628926bb423fa8a7e0b114511400ea9df38b76a changed monitor_flush()
to retry on qemu_chr_fe_write() errors. Howev... - 03:40 pm Revision abe20840: linux-user: Don't omit comma for strace of rt_sigaction()
- Pass the 'last' parameter of print_signal() through to
print_raw_param(); this fixes a problem where we weren't print... - 03:38 pm Revision 2bd01ac1: test-visitor-serialization: Fix some memory leaks
- This patch fixes some of the memory leaks in test-visitor-serialization but not all of them.
Signed-off-by: Stefan B... - 04:22 am Revision d05ef160: Allow clock_gettime() monotonic clock to be utilized on more OS's
- Allow the clock_gettime() code using monotonic clock to be utilized on
more POSIX compliannt OS's. This started as a ... - 03:23 am Revision 3a4a4697: Introduce IO_APIC_DEFAULT_ADDRESS for 0xfec00000
- Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id: 136382... - 03:23 am Revision c5a98cf3: pc_acpi_init(): don't bail as soon as failing to find default DSDT
- Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id: 136382... - 03:23 am Revision dab86234: extract/unify the constant 0xfee00000 as APIC_DEFAULT_ADDRESS
- A common dependency of the constant's current users:
- hw/apic_common.c
- hw/i386/kvmvapic.c
- target-i386/cpu.c
is "... - 03:23 am Revision cb88a4ea: change element type from "char" to "unsigned char" in ACPI table data
- The data is binary, not textual.
Also, acpi_table_add() abuses the "char *f" pointer -- which normally
points to fil... - 03:23 am Revision 0c764a9d: acpi_table_add(): accept QemuOpts and parse it with OptsVisitor
- As one consequence, strtok() -- which modifies its argument -- is replaced
with g_strsplit().
Signed-off-by: Laszlo ... - 03:23 am Revision e980f2bf: acpi_table_add(): extract and reimplement internals
- The new function acpi_table_install() installs any blob the caller passes
in. In the next patches this function will ... - 03:23 am Revision 445d9cae: acpi_table_add(): report fatal errors through an internal Error object
- The upcoming changes will need a cleanup section at the end of the
function, plus OptsVisitor reports errors via Erro... - 03:23 am Revision 23084327: like acpi_table_install(), acpi_table_add() should propagate Errors
- Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id: 136382... - 03:23 am Revision 4d8b3c63: strip some whitespace
- Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id: 136382... - 03:23 am Revision 8ccbad5c: qapi schema: add AcpiTableOptions
- Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id: 136382... - 03:21 am Revision b9936159: ipoctal232: Convert to use chardev properties directly
- Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by... - 03:21 am Revision 44c473de: qemu-char: Add qemu_chr_fe_claim / _release helper functions
- Add qemu_chr_fe_claim / _release helper functions for properly dealing with
avail_connections.
Signed-off-by: Hans d... - 03:21 am Revision 456d6069: qemu-char: Call fe_claim / fe_release when not using qdev chr properties
- chardev-frontends need to explictly check, increase and decrement the
avail_connections "property" of the chardev whe...
04/04/2013
- 01:55 am Revision 4dbb9ed3: xilinx_axienet: pump events as appropriate
- When the conditions blocking receiving are cleared, check for buffered rx
packets.
Signed-off-by: Peter Crosthwaite ... - 01:28 am Revision a23da659: po/Makefile: Fix dependency for %.mo
- Otherwise make will refuse to build updated .po files.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: A... - 01:28 am Revision bd4a4733: po: Update German translation
- Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
04/03/2013
- 11:09 pm Revision ec396014: help: add docs for missing 'queues' option of tap
- Cc: Markus Armbruster <armbru@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Jason Wang <jasowang@redhat.com>
... - 11:06 pm Revision 560e6396: acpi: initialize s4_val used in s4 shutdown
- While investigating why a 32 bit Windows 2003 guest wasn't able to
successfully perform a shutdown /h, it was discove... - 11:06 pm Revision a509d632: target-i386: Check for host features before filter_features_for_kvm()
- commit 5ec01c2e96910e1588d1a0de8609b9dda7618c7f broke "-cpu ..,enforce",
as it has moved kvm_check_features_against_h... - 11:06 pm Revision 8243b046: tpm: Fix several compiler warnings (redefined data types)
- Signed-off-by: Stefan Weil <sw@weilnetz.de>
Message-id: 1364933691-21197-1-git-send-email-sw@weilnetz.de
Signed-off-b... - 11:05 pm Revision eabb21aa: Merge remote-tracking branch 'sstabellini/xen-2013-04-03' into staging
- # By Hanweidong (1) and Stefano Stabellini (1)
# Via Stefano Stabellini
* sstabellini/xen-2013-04-03:
xen-mapcache:... - 02:51 pm Revision 044d4e1a: xen-mapcache: pass the right size argument to test_bits
- Compute the correct size for test_bits().
qemu_get_ram_ptr() and qemu_safe_ram_ptr() will call xen_map_cache()
with s... - 02:51 pm Revision e2deee3e: xen-mapcache: replace last_address_index with a last_entry pointer
- Replace last_address_index and last_address_vaddr with a single pointer
to the last MapCacheEntry used.
Signed-off-b... - 12:39 pm Revision a309ee6e: usb-hub: report status changes only once
- Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
- 12:39 pm Revision aa1c9e97: usb-tablet: Don't claim wakeup capability for USB-2 version
- Our ehci code does not implement wakeup support, so claiming support for
it with usb-tablet in USB-2 mode causes all ... - 12:39 pm Revision c24e4aac: usb-hub: limit chain length
- USB supports up to 5 hubs chained.
Catch attempts to chain more.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> - 12:39 pm Revision f9618633: usb: update docs for bus name change
- At some point the default usb bus name changed from 'usb.0' to
'usb-bus.0' (probably as part of the qom conversion). ... - 12:39 pm Revision 4b7b2afa: xhci: zap unused name field
- Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
- 10:55 am Revision 61803996: xhci: remove leftover debug printf
- Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
- 10:55 am Revision 0ab966cf: xhci: remove unimplemented printfs
- Replace them with a tracepoint, so they don't spam stderr by default.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> - 10:55 am Revision c94a7c69: xhci: fix numintrs sanity checks
- Make sure numintrs is a power of two, msi requires this.
https://bugzilla.redhat.com/show_bug.cgi?id=918035
Signed-... - 10:55 am Revision c874ea97: usb-redir: Add flow control support
- Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> - 10:55 am Revision 3713e148: usb-redir: Fix crash on migration with no client connected
- If no client is connected on the src side, then we won't receive a
parser during migrate, in this case usbredir_post_...
04/02/2013
- 10:07 pm Revision 162cbbd1: Merge remote-tracking branch 'luiz/queue/qmp' into staging
- # By Stefan Hajnoczi
# Via Luiz Capitulino
* luiz/queue/qmp:
chardev: clear O_NONBLOCK on SCM_RIGHTS file descripto... - 10:05 pm Revision 9d4563c4: configure: remove unset variables
- These variables have not been set for a long time. Do not
include them in config-host.mak.
Signed-off-by: Paolo Bon... - 06:47 pm Revision f9e8cacc: oslib-posix: rename socket_set_nonblock() to qemu_set_nonblock()
- The fcntl(fd, F_SETFL, O_NONBLOCK) flag is not specific to sockets.
Rename to qemu_set_nonblock() just like qemu_set_... - 06:47 pm Revision 1a751ebf: qemu-socket: set passed fd non-blocking in socket_connect()
- socket_connect() sets non-blocking on TCP or UNIX domain sockets if a
callback function is passed. Do the same for f... - 06:47 pm Revision fc13fa00: net: ensure "socket" backend uses non-blocking fds
- There are several code paths in net_init_socket() depending on how the
socket is created: file descriptor passing, UD... - 06:47 pm Revision 9b938c72: chardev: clear O_NONBLOCK on SCM_RIGHTS file descriptors
- When we receive a file descriptor over a UNIX domain socket the
O_NONBLOCK flag is preserved. Clear the O_NONBLOCK f... - 05:06 pm Revision 9481ecd7: qga schema: document generic QERR_UNSUPPORTED
- Part of the wording was shamelessly stolen from Michael Roth's email.
Suggested-by: Michael Roth <mdroth@linux.vnet.... - 05:06 pm Revision c964c9e0: qga schema: mark optional GuestLogicalProcessor.can-offline with #optional
- Suggested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Blake ... - 05:06 pm Revision 3f2a6087: qga: add windows implementation for guest-get-time
- Signed-off-by: Lei Li <lilei@linux.vnet.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Michael Rot... - 05:06 pm Revision ce7f7cc2: qemu-ga: ga_get_fd_handle(): abort if fd_counter overflows
- Today we reset fd_counter if it wraps, but it's better to abort()
instead, as fd_counter should never reach INT64_MAX... - 05:06 pm Revision b8f954fe: qga: add windows implementation for guest-set-time
- Signed-off-by: Lei Li <lilei@linux.vnet.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Michael Rot... - 04:15 pm Revision c707582b: VMXNET3: initialize rx_ridx to eliminate compile warning
- Gcc report "hw/vmxnet3.c:972: error: ‘rx_ridx’ may be used
uninitialized in this function", so fix it.
Signed-off-by... - 04:15 pm Revision b1ee5829: qdev: only send deleted event if device was realized
- Reported-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id: 136440217... - 04:15 pm Revision 8f0605cc: QOM-ify the TPM support
- QOM-ified the TPM support with much code borrowed from the rng implementation.
All other TPM related code moves will... - 04:13 pm Revision 684a096e: qemu-char: rewrite io_channel_send_all and drop the '_all' suffix
- The current code is oddly written and have equally odd semantics.
Despite the '_all' suffix, upon EAGAIN the result w... - 04:13 pm Revision d819cdcc: ui/gtk: Set QEMU window icon
- The QEMU icon which is already used for SDL
is now also loaded by GTK.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
M... - 04:13 pm Revision 77cfd14c: po: add French translation
- Cc: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Anthony L... - 04:13 pm Revision 9b6926e4: po: update existing translation files
- Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Anthony Liguori <aliguori@us.ibm.com>
S... - 04:13 pm Revision f8475655: po/Makefile: simplify
- In the hope we get more translations, we should not have to modify
po/Makefile for each of them.
Cc: Anthony Liguori... - 04:13 pm Revision 1b33b354: po/Makefile: correctly pass QEMU version
- Cc: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Anthony L... - 04:13 pm Revision d8da9ee8: gtk: make more messages translatable
- Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Anthony Liguo... - 04:13 pm Revision 4690579e: append the terminating '\0' to bootorder string
- Problem was introduced in commit c8a6ae8b. The last terminating
'\0' was lost, use the right length 5 ("HALT\0").
Re... - 04:12 pm Revision a130c6b2: Merge remote-tracking branch 'awilliam/tags/vfio-pci-for-qemu-20130401.0' into...
- vfio-pci pull request 20130401
# gpg: Signature made Mon 01 Apr 2013 02:40:45 PM CDT using RSA key ID 3BB08B22
# gpg... - 11:47 am Revision 5d45de97: microblaze: Add support for the sleep insn
- Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
04/01/2013
- 10:35 pm Revision 6dcfdbad: vfio: cleanup includes
- Starting to get messy, put the back in alphabetical order.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com> - 10:35 pm Revision c29029dd: vfio: Add bootindex support
- Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
- 10:35 pm Revision ba661818: vfio-pci: Move devices to D0 on reset
- Guests may leave devices in a low power state at reboot, but we expect
devices to be woken up for the next boot. Mak... - 10:34 pm Revision 82ca8912: vfio-pci: Add extra debugging
- Often when debugging it's useful to be able to disable bypass paths
so no interactions with the device are missed. A... - 10:34 pm Revision 7076eabc: qemu vfio-pci: Graphics device quirks
- Graphics cards have a number of different backdoors. Some of these
are alternative ways to get PCI BAR addresses, so... - 10:33 pm Revision f15689c7: qemu vfio-pci: Add support for VGA MMIO and I/O port access
- Most VGA cards need some kind of quirk to fully operate since they
hide backdoors to get to other registers outside o... - 08:50 pm Revision 4b5d5e87: vfio-pci: Generalize PCI config mangling
- Kernel-side vfio virtualizes all of config space, but some parts are
unique to Qemu. For instance we may or may not ... - 08:50 pm Revision 96adc5c7: vfio-pci: Add PCIe capability mangling based on bus type
- Windows seems to pay particular interest to the PCIe header type of
devices and will fail to load drivers if we attac... - 08:50 pm Revision 010ca0b3: linux-headers: Update to v3.9-rc2
- Unedited scripts/update-linux-headers.sh run against v3.9-rc2 tag
Signed-off-by: Alex Williamson <alex.williamson@re... - 07:49 pm Revision c334a388: target-i386: SSE4.2: use clz32/ctz32 instead of reinventing the wheel
- Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> - 07:49 pm Revision 174d4d21: tcg/mips: Implement muls2_i32
- Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> - 07:49 pm Revision b27a6cac: target-i386: SSE4.2: fix pcmpXstrX instructions in "Equal each" mode
- pcmpXstrX instructions in "Equal each" mode force both invalid element
pair to true. It means (upper - MAX(valids, va... - 07:49 pm Revision 75c9527e: target-i386: SSE4.2: fix pcmpXstrX instructions in "Equal ordered" mode
- The inner loop should only change the current bit of the result, instead
of the whole result.
Reviewed-by: Richard H... - 07:49 pm Revision 83f7dc28: target-i386: enable SSE4.1 and SSE4.2 in TCG mode
- Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> - 07:49 pm Revision 649ad05e: target-i386: SSE4.2: fix pcmpXstrX instructions in "Ranges" mode
- Fix the order of the of the comparisons to match the "Intel 64 and
IA-32 Architectures Software Developer's Manual".
... - 07:49 pm Revision e4eba27e: target-i386: SSE4.2: fix pcmpXstrX instructions with "Masked(-)" polarity
- valids can equals to -1 if the reg/mem string is empty. Change the
expression to have an empty xor mask in that case.... - 07:49 pm Revision 2b8d7e9d: target-i386: SSE4.2: fix pcmpXstrm instructions
- pcmpXstrm instructions returns their result in the XMM0 register and
not in the first operand.
Reviewed-by: Richard ... - 07:49 pm Revision 93e3c0ae: target-i386: SSE4.2: fix pcmpXstri instructions
- ffs1 returns the first bit set to one starting counting from the most
significant bit.
pcmpXstri returns the most si... - 07:49 pm Revision 34c6addd: target-i386: SSE4.1: fix pinsrb instruction
- gen_op_mov_TN_reg() loads the value in cpu_T[0], so this temporary should
be used instead of cpu_tmp0.
Reviewed-by: ... - 07:49 pm Revision da5156cd: target-i386: SSE4.2: fix pcmpgtq instruction
- The "Intel 64 and IA-32 Architectures Software Developer's Manual" (at
least recent versions) clearly says that the c... - 06:36 pm Revision c7b4c367: Merge remote-tracking branch 'stefanha/trivial-patches' into staging
- # By Dunrong Huang (1) and others
# Via Stefan Hajnoczi
* stefanha/trivial-patches:
hw/tcx: Remove unused 'addr' fi... - 05:08 pm Revision a86f200a: musicpal: qdevify musicpal-misc
- Make musicpal-misc into its own (trivial) qdev device, so we
can get rid of the abuse of sysbus_add_memory().
Signed... - 05:08 pm Revision c34e1205: milkymist-softusb: Don't map RAM memory regions in the device itself
- Don't map the pmem and dmem RAM memory regions in the milkymist-softusb
device itself. Instead just expose them as sy... - 05:08 pm Revision 20cf850c: milkymist-minimac2: Just expose buffers as a sysbus mmio region
- Just expose the register buffers memory as a standard sysbus mmio
region which the creator of the device can map, rat... - 05:08 pm Revision 4ce5dae8: sysbus: make SysBusDeviceClass::init optional
- Make the SysBusDeviceClass::init optional, for devices which
genuinely don't need to do anything here. In particular,... - 05:08 pm Revision c31bc98e: hw/milkymist-softusb: set buffer in softusb_read_{dmem, pmem} error path
- Make sure we set the buffer to something in the softusb_read_{dmem,pmem}
error paths, since the caller will use the b... - 05:08 pm Revision e63d28d7: sysbus: Remove sysbus_add_memory and sysbus_del_memory
- Remove the sysbus_add_memory and sysbus_del_memory functions. These
are trivial wrappers for mapping a memory region ...
03/31/2013
- 09:26 pm Revision 53574064: target-moxie: set do_interrupt to a target-specific helper function
- The value of "do_interrupt" member of CPUClass shoule be set to a
target-specific function, or it will lead to a segf...
03/30/2013
- 04:08 pm Revision 5e3a0f41: w32: Fix build with older gcc (unresolved symbol)
- The cross i586-mingw32msvc-gcc 4.4.4 from Debian Squeeze does not support
__sync_val_compare_and_swap by default.
Us... - 04:03 pm Revision e06335b9: target-moxie: Fix pointer-to-integer conversion (MinGW-w64)
- The type cast must use tcg_target_long instead of long.
This makes a difference for hosts where sizeof(long) != sizeo...
03/28/2013
- 07:59 pm Revision d93a8a43: piix_pci: Use DEVICE() and ISA_BUS()
- Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Tested-by: ... - 07:59 pm Revision c9721215: piix_pci: Fix C99 comments
- Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Tested-by: ... - 07:59 pm Revision 57a0f0c6: piix_pci: Clean up i440FX object handling
- Define and use I440FX_PCI_DEVICE() instead of using DO_UPCAST().
Signed-off-by: David Woodhouse <David.Woodhouse@int... - 07:58 pm Revision 226ecabf: qemu-bridge-helper: force usage of a very high MAC address for the bridge
- Linux uses the lowest enslaved MAC address as the MAC address of
the bridge. Set MAC address to a high value so that... - 07:57 pm Revision 1ab461b5: virtio-balloon: add the virtio-balloon device.
- Create virtio-balloon which extends virtio-device, so it can be connected on
virtio-bus.
Signed-off-by: KONRAD Frede... - 07:57 pm Revision 2900af59: virtio-balloon: cleanup: remove qdev field.
- The qdev field is no longer needed, just drop it.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Reviewe... - 07:57 pm Revision 5c7d0962: virtio-balloon: cleanup: init and exit function.
- This remove old init and exit function as they are no longer needed.
Signed-off-by: KONRAD Frederic <fred.konrad@gre... - 07:57 pm Revision 30bff6a0: virtio-balloon-ccw: switch to the new API.
- Here the virtio-balloon-ccw is modified for the new API. The device
virtio-balloon-ccw extends virtio-ccw-device as b... - 07:57 pm Revision c96caced: virtio-balloon: cleanup: QOM casts.
- As the virtio-balloon-pci is switched to the new API, we can use QOM
casts.
Signed-off-by: KONRAD Frederic <fred.kon... - 07:57 pm Revision e378e88d: virtio-balloon-pci: switch to the new API.
- Here the virtio-balloon-pci is modified for the new API. The device
virtio-balloon-pci extends virtio-pci. It creates... - 07:57 pm Revision fde245ca: Merge remote-tracking branch 'stefanha/block' into staging
- # By Kevin Wolf (22) and Peter Lieven (1)
# Via Stefan Hajnoczi
* stefanha/block: (23 commits)
block: Fix direct us... - 07:57 pm Revision 837df37e: Merge remote-tracking branch 'stefanha/tracing' into staging
- # By Lluís Vilanova (7) and others
# Via Stefan Hajnoczi
* stefanha/tracing:
vl: add runstate_set tracepoint
.git... - 03:20 pm Revision 7e866003: vl: add runstate_set tracepoint
- This patch enables us to know RunState transition. It will be userful
for investigation when the trouble occured in s... - 03:19 pm Revision c6f18b91: trace: [stderr] Port to generic event information and new control interface
- Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> - 03:19 pm Revision 60481e21: trace: [simple] Port to generic event information and new control interface
- The backend is forced to dump event numbers using 64 bits, as TraceEventID is
an enum.
Signed-off-by: Lluís Vilanova... - 03:19 pm Revision 878e63e6: .gitignore: add trace/generated-events.[ch]
- Don't display autogenerated files in git-status(1).
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> - 03:19 pm Revision 45be2f5d: trace: Provide a generic tracing event descriptor
- Uses tracetool to generate a backend-independent tracing event description
(struct TraceEvent).
The values for such ... - 03:19 pm Revision 93fba161: trace: [tracetool] Explicitly identify public backends
- Public backends are those printed by "--list-backends" and thus considered valid
by the configure script.
Signed-off... - 03:19 pm Revision a7373b1f: trace: rebuild generated-events.o when configuration changes
- Make sure to rebuild generated-events.o when ./configure options change.
This prevents linker errors when a stale gen... - 03:19 pm Revision a46b24fd: .gitignore: rename trace/generated-tracers.dtrace
- For a while the file was called trace/generated-tracers-dtrace.dtrace
but today it's called trace/generated-tracers.d... - 03:19 pm Revision ca285c3f: trace: [monitor] Use new event control interface
- Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> - 03:19 pm Revision b1bae816: trace: Provide a detailed event control interface
- This interface decouples event obtaining from interaction.
Events can be obtained through three different methods:
... - 03:19 pm Revision fd068a95: trace: [default] Port to generic event information and new control interface
- Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> - 12:58 pm Revision 5d186eb0: block: Fix direct use of protocols as driver for bdrv_open()
- bdrv_open_common() implements direct use of protocols by copying the
pre-opened BlockDriverStates to bs using bdrv_sw... - 12:52 pm Revision 710c2496: qcow2: Use byte granularity in qcow2_alloc_cluster_offset()
- This gets rid of the nb_clusters and keep_clusters and the associated
complicated calculations. Just advance the numb... - 12:52 pm Revision ecdd5333: qcow2: Gather clusters in a looping loop
- Instead of just checking once in exactly this order if there are
dependendies, non-COW clusters and new allocation, t... - 12:52 pm Revision 2c3b32d2: qcow2: Move cluster gathering to a non-looping loop
- This patch is mainly to separate the indentation change from the
semantic changes. All that really changes here is th... - 12:52 pm Revision 88c6588c: qcow2: Allow requests with multiple l2metas
- Instead of expecting a single l2meta, have a list of them. This allows
to still have a single I/O request for the gue... - 12:52 pm Revision 83baa9a4: qcow2: Clean up handle_alloc()
- Things can be simplified a bit now. No semantic changes.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by:... - 12:52 pm Revision e62daaf6: qcow2: handle_copied(): Implement non-zero host_offset
- Look only for clusters that start at a given physical offset.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-of... - 12:52 pm Revision 3b8e2e26: qcow2: handle_alloc(): Get rid of keep_clusters parameter
- handle_alloc() is now called with the offset at which the actual new
allocation starts instead of the offset at which... - 12:52 pm Revision f5bc6350: qcow2: handle_alloc(): Get rid of nb_clusters parameter
- We already communicate the same information in *bytes.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: S... - 12:52 pm Revision c37f4cd7: qcow2: Finalise interface of handle_alloc()
- The interface works completely on a byte granularity now and duplicated
parameters are removed.
Signed-off-by: Kevin... - 12:52 pm Revision 037689d8: qcow2: Decouple cluster allocation from cluster reuse code
- This moves some code that prepares the allocation of new clusters to
where the actual allocation happens. This is the... - 12:52 pm Revision c53ede9f: qcow2: handle_copied(): Get rid of keep_clusters parameter
- Now *bytes is used to return the length of the area that can be written
to without performing an allocation or COW.
... - 12:52 pm Revision d9d74f41: qcow2: Improve check for overlapping allocations
- The old code detected an overlapping allocation even when the
allocations didn't actually overlap, but were only adja... - 12:52 pm Revision 0af729ec: qcow2: Factor out handle_copied()
- Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> - 12:52 pm Revision acb0467f: qcow2: handle_copied(): Get rid of nb_clusters parameter
- handle_copied() uses its bytes parameter now to determine how many
clusters it should try to find.
Signed-off-by: Ke... - 12:52 pm Revision 65eb2e35: qcow2: Change handle_dependency to byte granularity
- This is a more precise description of what really constitutes a
dependency. The behaviour doesn't change at this poin... - 12:52 pm Revision 411d62b0: qcow2: Prepare handle_alloc/copied() for byte granularity
- This makes handle_alloc() and handle_copied() return byte-granularity
host offsets instead of returning always the cl... - 12:52 pm Revision 10f0ed8b: qcow2: Factor out handle_alloc()
- Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> - 12:52 pm Revision 6f749281: qemu-iotests: More concurrent allocation scenarios
- Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> - 12:52 pm Revision 142c6b1a: vl.c: call bdrv_init_with_whitelist() before cmdline parsing
- commit 4d454574 "qemu-option: move standard option definitions
out of qemu-config.c" broke support for commandline op... - 12:52 pm Revision 17a71e58: qcow2: Handle dependencies earlier
- Handling overlapping allocations isn't just a detail of cluster
allocation. It is rather one of three ways to get the... - 12:52 pm Revision c349ca4b: qcow2: Fix "total clusters" number in bdrv_check
- This should be based on the virtual disk size, not on the size of the
image.
Interesting observation: With some VM s... - 12:52 pm Revision 9ee6439e: qcow2: Remove bogus unlock of s->lock
- The unlock wakes up the next coroutine, but the currently running
coroutine will lock it again before it yields, so t... - 11:32 am Revision b0d62a3d: hw/tcx: Remove unused 'addr' field and the property that sets it
- Remove the 'addr' field from TCXState (since it is completely unused),
also the qdev property which sets it. This see... - 11:27 am Revision 0f9d76e5: hw/i386/pc: format load_linux function
- Signed-off-by: liguang <lig.fnst@cn.fujitsu.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> - 11:23 am Revision 9941afde: configure: show debug-info option in --help output
- "--enable-debug-info" and "--disable-debug-info" were not shown
in --help output.
Signed-off-by: Dunrong Huang <huan...
03/27/2013
- 05:26 pm Revision e280ff5e: spice-qemu-char: Drop hackish vmc_register on spice_chr_write
- Now that the core takes care of fe_open tracking we no longer need this hack.
Signed-off-by: Hans de Goede <hdegoede... - 05:26 pm Revision bc6b815d: virtio-serial: propagate guest_connected to the port on post_load
- When migrating a host with with a spice agent running the mouse becomes
non operational after the migration due to th... - 05:26 pm Revision b2c1394a: virtio-serial: Consolidate guest_open/guest_close into set_guest_connected
- Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Message-id: 1364292483-16564-10-git-send-email-hdegoede@redhat.com... - 05:26 pm Revision 574b711a: qemu-char: Consolidate guest_close/guest_open into a set_fe_open callback
- Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Message-id: 1364292483-16564-7-git-send-email-hdegoede@redhat.com
... - 05:26 pm Revision c0c4bd2c: qemu-char: Add fe_open tracking
- Add tracking of the fe_open state to struct CharDriverState.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Mess... - 05:26 pm Revision 8e25daa8: qemu-char: Cleanup: consolidate fe_open/fe_close into fe_set_open
- Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Message-id: 1364292483-16564-6-git-send-email-hdegoede@redhat.com
... - 05:26 pm Revision fee204fd: qemu-char: Rename qemu_chr_generic_open to qemu_chr_be_generic_open
- To better reflect that it is for handling a backend being opened.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>... - 05:26 pm Revision a59bcd31: qemu-char: add_handlers: Don't re-send the be_open event on unregister
- Resending the be_open event only is useful when a frontend is registering, not
when it is unregistering.
Signed-off-... - 05:26 pm Revision 19083228: qemu-char: Automatically do fe_open / fe_close on qemu_chr_add_handlers
- Most frontends can't really determine if the guest actually has the frontend
side open. So lets automatically generat... - 05:26 pm Revision 85d91e32: qemu-char: Move incrementing of avail_connections to qdev-properties-system
- The decrement of avail_connections is done in qdev-properties-system move
the increment there too for proper balancin... - 05:26 pm Revision 16665b94: qemu-char: Rename opened to be_open
- Rename the opened variable to be_open to reflect that it contains the
opened state of the backend.
Signed-off-by: Ha... - 05:10 pm Revision 99835e00: compiler: fix warning with GCC 4.8.0
- GCC 4.8.0 introduces a new warning:
block/qcow2-snapshot.c: In function 'qcow2_write_snapshots’:
block/qcow2...
03/26/2013
- 11:16 pm Revision 404e7a4f: Merge remote-tracking branch 'mst/tags/for_anthony' into staging
- virtio,pci,qom
Work by Alex to support VGA assignment,
pci and virtio fixes by Stefan, Jason and myself, and a
new q... - 09:02 pm Revision 6214e73c: pcie: Add endpoint capability initialization wrapper
- Fix the awkward API of mangling the caller specified PCIe type and
just provide an interface to initialize an endpoin... - 09:02 pm Revision a5519b42: roms: switch oldnoconfig to olddefconfig
- When a new option is added that qemu does not know
about, the prudent thing is to use the default not
force it to "no... - 09:02 pm Revision afb661eb: pci: Q35, Root Ports, and Switches create PCI Express buses
- Convert q35, ioh3420, xio3130_upstream, and xio3130_downstream to
use the new TYPE_PCIE_BUS.
Signed-off-by: Alex Wil... - 09:02 pm Revision 8c0bf9e2: pci: Create pci_bus_is_express helper
- For testing the bus type.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Michael S. Tsir... - 09:02 pm Revision 0889464a: pci: Create and use API to determine root buses
- Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com> - 09:02 pm Revision 3a861c46: pci: Create and register a new PCI Express TypeInfo
- This will allow us to differentiate Express and Legacy buses.
Signed-off-by: Alex Williamson <alex.williamson@redhat... - 09:02 pm Revision eb28cb1b: pcie: Mangle types to match topology
- Windows will fail to start drivers for devices with an Endpoint type
PCIe capability attached to a Root Complex (code... - 09:02 pm Revision 60a0e443: pci: Allow PCI bus creation interfaces to specify the type of bus
- No change to any types.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Michael S. Tsirki... - 09:02 pm Revision cf09458d: pci: Move PCI and PCIE type defines
- Move these so that we can reference them from a more common header
instead of including pci_bus.h everywhere.
Signed... - 09:02 pm Revision 600d05b9: pci_bridge: drop formatting from source
- We use the same formatting for all files, it
doesn't make sense to have formatting directives only
in pci bridge head... - 09:02 pm Revision 659fefee: pci_bridge: Use a default map_irq function
- The PCI bridge spec defines a default swizzle for translating INTx
IRQs from secondary bus to primary. Use this by d... - 09:02 pm Revision 45eb768c: pci_bridge: factor out common code
- Reuse common code in pcie_port, override the hardwired-to-0
bits per PCI Express spec.
No functional change but makes... - 09:02 pm Revision 8c7f3dd0: pci: refuse empty ROM files
- A zero size ROM file is invalid and should produce a warning.
Attempting to use a zero size file ends up hitting an a... - 09:02 pm Revision ba7d8515: pci: Teach PCI Bridges about VGA routing
- Each PCI Bridge has a set of implied VGA regions that are enabled when
the VGA bit is set in the bridge control regis... - 09:02 pm Revision ea7cfed6: pci_bridge: Remove duplicate IRQ swizzle function
- pci_bridge_dev_map_irq_fn() is identical to pci_swizzle_map_irq_fn(),
which is now the default for all PCI bridges. ... - 09:02 pm Revision 49cd9ac6: exec: assert that RAMBlock size is non-zero
- find_ram_offset() does not handle size=0 gracefully. It hands out the
same RAMBlock offset multiple times, leading t... - 09:02 pm Revision e5368f0d: pci: Fix INTx routing notifier recursion
- For some reason we recurse to fire the INTx routing notifier for each
child of a bus, for each possible device of a b... - 09:02 pm Revision e01fd687: pci: Add PCI VGA helpers
- Allow devices to register VGA memory regions for handling PCI spec
defined VGA I/O port and MMIO areas. PCI will att... - 09:02 pm Revision f8f7c533: virtio-net: remove layout assumptions for mq ctrl
- Following commit 921ac5d0f3a0df869db5ce4edf752f51d8b1596a (virtio-net:
remove layout assumptions for ctrl vq), this p... - 09:02 pm Revision a38b2c49: virtio-pci: guest notifier mask without non-irqfd
- non-irqfd setups are currently broken with vhost:
we start up masked and nothing unmasks the interrupts.
Fix by using... - 09:02 pm Revision 15054fce: qmp: add path to device_deleted event
- Add QOM path to device deleted event. It now becomes useful to report
it for devices which don't have an ID assigned... - 09:00 pm Revision e998fa8d: qom: call class destructor before unparent
- It seems more logical to have destruction flow start with the subclass
and move up to the base class. This ensures o... - 08:38 pm Revision 18501ae6: Merge remote-tracking branch 'quintela/migration.next' into staging
- # By Peter Lieven (9) and others
# Via Juan Quintela
* quintela/migration.next: (22 commits)
Use qemu_put_buffer_as... - 08:34 pm Revision fad5593c: Merge remote-tracking branch 'cohuck/virtio-ccw-upstr' into staging
- # By Cornelia Huck
# Via Cornelia Huck
* cohuck/virtio-ccw-upstr:
virtio-ccw: Queue sanity check for notify hypercall. - 07:04 pm Revision b57ed9bf: virtio-ccw: Queue sanity check for notify hypercall.
- Verify that the virtio-ccw notify hypercall passed a reasonable
value for queue.
Cc: qemu-stable@nongnu.org
Reported... - 05:08 pm Revision 0fbf01fe: qtest: use synchronous I/O for char device
- Peter reported that rtc-test would periodically hang. It turns out
this was due to an EAGAIN occurring on qemu_chr_f... - 05:08 pm Revision cd18720a: char: introduce a blocking version of qemu_chr_fe_write
- Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
- 04:27 pm Revision 54852b03: qom: Detect attempts to add a property that already exists
- Detect attempts to add a property to an object if one of
that name already exists, and report them as errors.
Signed... - 04:27 pm Revision e769bdc2: hw/qdev: Abort rather than ignoring errors adding device properties
- Instead of ignoring any errors that occur when adding properties
to a new device in device_initfn(), check for them a... - 04:26 pm Revision b000dfbd: hw/qdev-properties.c: Improve diagnostic for setting property after realize
- Now we have error_setg() we can improve the error message emitted if
you attempt to set a property of a device after ... - 04:26 pm Revision bc7b90a0: virtio-scsi-pci: switch to new API.
- Here the virtio-scsi-pci is modified for the new API. The device virtio-scsi-pci
extends virtio-pci. It creates and c... - 04:26 pm Revision c19f806e: virtio-scsi: cleanup: remove qdev field.
- The qdev field is no longer needed. Just drop it.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Reviewe... - 04:26 pm Revision 9ef13d8f: virtio-scsi-s390: switch to the new API.
- Here the virtio-scsi-s390 is modified for the new API. The device
virtio-scsi-s390 extends virtio-s390-device as befo... - 04:26 pm Revision 763684be: virtio-scsi: cleanup: init and exit functions.
- This remove old init and exit function as they are no longer needed.
Signed-off-by: KONRAD Frederic <fred.konrad@gre... - 04:26 pm Revision 0ac8e139: virtio-scsi: cleanup: use QOM casts.
- As the virtio-scsi-pci and virtio-scsi-s390 are switched to the new API,
we can use QOM casts.
Signed-off-by: KONRAD... - 04:26 pm Revision 3ab1dfdd: virtio-scsi: add the virtio-scsi device.
- Create virtio-scsi which extends virtio-device, so it can be connected on
virtio-bus.
Signed-off-by: KONRAD Frederic... - 04:26 pm Revision c908ea10: virtio-scsi-ccw: switch to new API
- Here the virtio-scsi-ccw is modified for the new API. The device
virtio-scsi-ccw extends virtio-ccw-device as before.... - 04:26 pm Revision 4bfeb18a: virtio-scsi: moving host_features from properties to transport properties.
- host_features field is part of the transport device. So move all the
host_features related properties into transport ... - 04:26 pm Revision 22219527: virtio-scsi: allocate cmd_vqs array separately.
- Allocate/Free the cmd_vqs array separately to have a fixed size device.
Signed-off-by: KONRAD Frederic <fred.konrad@... - 04:26 pm Revision 394e2e4c: virtio-scsi: don't use pointer for configuration.
- The configuration field must not be a pointer as it will be used for virtio-scsi
properties. So *conf is replaced by ... - 04:25 pm Revision 2fd1a053: Merge remote-tracking branch 'luiz/queue/qmp' into staging
- # By Corey Bryant (2) and others
# Via Luiz Capitulino
* luiz/queue/qmp:
New QMP command query-cpu-max and HMP comm... - 02:32 pm Revision cb88aa88: Use writev ops if available
- Update qemu_fflush and stdio_close to use writev ops if they are available
Use the buffers stored in the iovec.
Sign... - 02:32 pm Revision f1c72795: migration: do not sent zero pages in bulk stage
- during bulk stage of ram migration if a page is a
zero page do not send it at all.
the memory at the destination read... - 02:32 pm Revision 28085f7b: Add socket_writev_buffer function
- Signed-off-by: Orit Wasserman <owasserm@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com> - 02:32 pm Revision 5cc11c46: migration: use XBZRLE only after bulk stage
- at the beginning of migration all pages are marked dirty and
in the first round a bulk migration of all pages is perf... - 02:32 pm Revision 7d8a30bb: Update bytes_xfer in qemu_put_byte
- Signed-off-by: Orit Wasserman <owasserm@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: J... - 02:32 pm Revision 6181ec24: Add qemu_put_buffer_async
- This allows us to add a buffer to the iovec to send without copying it
into the static buffer, the buffer will be sen... - 02:32 pm Revision d913829f: Add QemuFileWritevBuffer QemuFileOps
- This will allow us to write an iovec
Signed-off-by: Orit Wasserman <owasserm@redhat.com>
Reviewed-by: Juan Quintela ... - 02:32 pm Revision 70c8652b: migration: do not search dirty pages in bulk stage
- avoid searching for dirty pages just increment the
page offset. all pages are dirty anyway.
Signed-off-by: Peter Lie... - 02:32 pm Revision 500f0061: Use qemu_put_buffer_async for guest memory pages
- This will remove an unneeded copy of guest memory pages.
For the page header and device state we still copy the data ... - 02:32 pm Revision b3ea2bdb: Store the data to send also in iovec
- All data is still copied into the static buffer.
Adjacent iovecs are coalesced so we send one big buffer
instead of m... - 02:32 pm Revision 3edcd7e6: migration: search for zero instead of dup pages
- virtually all dup pages are zero pages. remove
the special is_dup_page() function and use the
optimized buffer_find_n... - 02:32 pm Revision 78d07ae7: migration: add an indicator for bulk state of ram migration
- the first round of ram transfer is special since all pages
are dirty and thus all memory pages are transferred to
the... - 02:32 pm Revision 49f676a0: bitops: unroll while loop in find_next_bit()
- this patch adopts the loop unrolling idea of bitmap_is_zero() to
speed up the skipping of large areas with zeros in f... - 02:32 pm Revision 56ded708: buffer_is_zero: use vector optimizations if possible
- performance gain on SSE2 is approx. 20-25%. altivec
is not tested. performance for unsigned long arithmetic
is unchan... - 02:32 pm Revision 41a259bd: cutils: add a function to find non-zero content in a buffer
- this adds buffer_find_nonzero_offset() which is a SSE2/Altivec
optimized function that searches for non-zero content ... - 02:30 pm Revision c61ca00a: move vector definitions to qemu-common.h
- vector optimizations will now be used at various places
not just in is_dup_page() in arch_init.c
Signed-off-by: Pete... - 02:30 pm Revision 213945e4: savevm: Add VMSTATE_FLOAT64 helpers
- The current savevm code includes VMSTATE helpers for a number of commonly
used data types, but not for the float64 ty... - 02:30 pm Revision 377e2cb9: savevm: Fix bugs in the VMSTATE_VBUFFER_MULTIPLY definition
- The VMSTATE_BUFFER_MULTIPLY macro is misnamed - it actually specifies
a variably sized buffer with VMS_VBUFFER, so sh... - 02:30 pm Revision d58f5598: savevm: Add VMSTATE_UINTTL_EQUAL helper
- This adds an _EQUAL VMSTATE helper for target_ulongs, defined in terms of
VMSTATE_UINT32_EQUAL or VMSTATE_UINT64_EQUA... - 02:30 pm Revision 8474a9dd: savevm: Add VMSTATE_STRUCT_VARRAY_POINTER_UINT32
- Currently the savevm code contains a VMSTATE_STRUCT_VARRAY_POINTER_INT32
helper (a variably sized array with the numb... - 02:30 pm Revision e344b8a1: savevm: Add VMSTATE_UINT64_EQUAL helpers
- The savevm code already includes a number of *_EQUAL helpers which act as
sanity checks verifying that the configurat... - 02:30 pm Revision 817c6045: migration: Improve QMP documentation
- Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
03/25/2013
- 10:21 pm Revision e5ecec7b: qmp: fix handling of boolean values in qmp-shell
- qmp-shell converts only integer arguments and the rest
is assumed to be strings which are faithfully sent as
quoted s... - 10:21 pm Revision 88ca7bcf: QMP: Remove duplicate TPM type from query-tpm
- Signed-off-by: Corey Bryant <coreyb@linux.vnet.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Mark... - 10:21 pm Revision 28c4fa32: QMP: TPM QMP and man page documentation updates
- Signed-off-by: Corey Bryant <coreyb@linux.vnet.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Mark... - 10:21 pm Revision 4d700430: New QMP command query-cpu-max and HMP command cpu_max
- These commands return the maximum number of CPUs supported by the
currently running emulator instance, as defined in ... - 08:14 pm Revision dcadaa9b: Merge remote-tracking branch 'stefanha/net' into staging
- # By Dmitry Fleytman (5) and others
# Via Stefan Hajnoczi
* stefanha/net:
net: increase buffer size to accommodate ... - 08:14 pm Revision 4b5805de: Merge remote-tracking branch 'stefanha/block' into staging
- # By Liu Yuan (1) and Stefan Weil (1)
# Via Stefan Hajnoczi
* stefanha/block:
block: Add options QDict to bdrv_file... - 08:13 pm Revision d2f38a0a: Merge remote-tracking branch 'kraxel/ipxe.3' into staging
- # By Gerd Hoffmann
# Via Gerd Hoffmann
* kraxel/ipxe.3:
ipxe: update binaries
ipxe: disable two second timeout - 08:10 pm Revision 6db253ca: gtk: Release modifier when graphic console loses keyboard focus
- This solves, e.g., sticky ALT when selecting a GTK menu, switching to a
different window or selecting a different vir... - 08:10 pm Revision d63c9477: glib: add a compatibility interface for g_timeout_add_seconds
- Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
- 12:14 pm Revision d32fcad3: net: increase buffer size to accommodate Jumbo frame pkts
- Socket buffer sizes were hard-coded to 4K for VDE and socket netdevs. Bump this
up to 68K (ala tap netdev) to handle... - 12:13 pm Revision e263cd49: Packet abstraction for VMWARE network devices
- Signed-off-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Yan Vugenfirer <yan@daynix.com>
Signed-off-by: Stef... - 12:13 pm Revision 786fd2b0: VMXNET3 device implementation
- Signed-off-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Yan Vugenfirer <yan@daynix.com>
Signed-off-by: Stef... - 12:13 pm Revision 75020a70: Common definitions for VMWARE devices
- Signed-off-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Yan Vugenfirer <yan@daynix.com>
Signed-off-by: Stef... - 12:13 pm Revision 84026301: net: iovec checksum calculator
- Signed-off-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Yan Vugenfirer <yan@daynix.com>
Signed-off-by: Stef... - 12:13 pm Revision 5acf5ea4: Checksum-related utility functions
- net_checksum_add_cont()
checksum calculation for scattered data with odd chunk sizes
net_raw_checksum()
checksum cal... - 12:13 pm Revision 20048d0a: net: use socket_set_nodelay() for -netdev socket
- Reduce -netdev socket latency by disabling the Nagle algorithm on
SOCK_STREAM sockets in net/socket.c. Since we are ... - 10:53 am Revision ea804cad: block: Add options QDict to bdrv_file_open() prototypes (fix MinGW build)
- The new parameter is unused yet.
This part was missing in commit 787e4a8500020695eb391e2f1cc4767ee071d441.
Cc: Kevi... - 10:51 am Revision d43731c7: rbd: fix compile error
- Commit 787e4a85 [block: Add options QDict to bdrv_file_open() prototypes] didn't
update rbd.c accordingly.
Cc: Kevin... - 10:13 am Revision 0099cd43: ipxe: update binaries
- Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
- 10:07 am Revision 95ca557d: ipxe: disable two second timeout
- Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
03/24/2013
- 12:30 pm Revision fe6344a0: Remove device_tree.o from hw/moxie/Makefile.objs.
- Here's a fix for the build problem identified by Aurelien Jarno here:
http://lists.gnu.org/archive/html/qemu-devel/20...
03/23/2013
- 04:31 pm Revision 2d497542: tcg-optimize: Fold sub r,0,x to neg r,x
- Cc: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <b... - 04:30 pm Revision 4980ef9e: target-i386: Don't modify env->eflags around cpu_dump_state
- We can compute the value in cpu_dump_state anyway, and gratuitous
modifications to eflags creates heisenbugs.
Cc: Bl... - 04:26 pm Revision c53de1a2: target-i386: Fix flags computation for ADOX
- When starting from CC_OP_DYNAMIC, and issuing adox before adcx,
a typo used the wrong value for the resulting CC_OP.
... - 04:25 pm Revision d15a9c23: Add top level changes for moxie
- Signed-off-by: Anthony Green <green@moxielogic.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com> - 04:25 pm Revision a360d965: Add sample moxie system
- Signed-off-by: Anthony Green <green@moxielogic.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com> - 04:25 pm Revision 525bd324: Add moxie target code
- Signed-off-by: Anthony Green <green@moxielogic.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com> - 04:25 pm Revision bd86a88e: Add moxie disassembler
- Signed-off-by: Anthony Green <green@moxielogic.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com> - 04:23 pm Revision f7c61bf8: Merge branch 'for-upstream' of git://github.com/mwalle/qemu
- * 'for-upstream' of git://github.com/mwalle/qemu:
configure: rename OpenGL feature to GLX
configure: proper OpenG...
03/22/2013
- 10:43 pm Revision d76bb735: Merge branch 'ppc-for-upstream' of git://github.com/agraf/qemu
- * 'ppc-for-upstream' of git://github.com/agraf/qemu: (58 commits)
target-ppc: Use NARROW_MODE macro for tlbie
tar... - 10:38 pm Revision 52ae646d: tcg: Fix occasional TCG broken problem when ldst optimization enabled
- is_tcg_gen_code() checks the upper limit of TCG generated code range wrong, so
that TCG could get broken occasionally... - 08:08 pm Revision 3f08ffb4: Merge remote-tracking branch 'kwolf/for-anthony' into staging
- # By Kevin Wolf (12) and Peter Lieven (2)
# Via Kevin Wolf
* kwolf/for-anthony:
nbd: Check against invalid option c... - 08:05 pm Revision cecd77ae: Merge remote-tracking branch 'stefanha/trivial-patches' into staging
- # By liguang (2) and others
# Via Stefan Hajnoczi
* stefanha/trivial-patches:
qdev: remove redundant abort()
giti... - 08:05 pm Revision f9308207: Merge remote-tracking branch 'cohuck/virtio-ccw-upstr' into staging
- # By Cornelia Huck
# Via Cornelia Huck
* cohuck/virtio-ccw-upstr:
virtio-ccw, s390-virtio: Use generic virtio-blk m... - 06:51 pm Revision 681e7ad0: nbd: Check against invalid option combinations
- A file name may only specified if no host or socket path is specified.
The latter two may not appear at the same time... - 06:51 pm Revision f53a1feb: nbd: Accept -drive options for the network connection
- The existing parsers for the file name now parse everything into the
bdrv_open() options QDict. Instead of using thes... - 06:51 pm Revision bebbf7fa: nbd: Use default port if only host is specified
- The URL method already takes care to apply the default port when none is
specfied. Directly specifying driver-specifi... - 06:51 pm Revision c2ad1b0c: block: Allow omitting the file name when using driver-specific options
- After this patch, using -drive with an empty file name continues to open
the file if driver-specific options are used... - 06:51 pm Revision 08b392e1: block: Rename variable to avoid shadowing
- bdrv_open() uses two different variables called options. Rename one of
them to avoid confusion and to allow the outer... - 06:51 pm Revision 6963a30d: block: Introduce .bdrv_parse_filename callback
- If a driver needs structured data and not just a string, it can provide
a .bdrv_parse_filename callback now that pars... - 06:51 pm Revision f5866fa4: block: Make find_image_format safe with NULL filename
- In order to achieve this, the .bdrv_probe callbacks of all drivers must
cope with this. The DMG driver is the only on... - 06:51 pm Revision 197a4859: nbd: Remove unused functions
- Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com> - 06:51 pm Revision 707ff828: block: Pass bdrv_file_open() options to block drivers
- Specify -drive file.option=... on the command line to pass the option to
the protocol instead of the format driver.
... - 06:51 pm Revision 92b7a08d: block: complete all IOs before resizing a device
- this patch ensures that all pending IOs are completed
before a device is resized. this is especially important
if a d... - 06:51 pm Revision f17c90be: nbd: Keep hostname and port separate
- The NBD block supports an URL syntax, for which a URL parser returns
separate hostname and port fields. It also suppo... - 06:51 pm Revision e62be888: qemu-socket: Make socket_optslist public
- Allow other users to create the QemuOpts needed for inet_connect_opts().
Signed-off-by: Kevin Wolf <kwolf@redhat.com... - 06:51 pm Revision 5c916681: Revert "block: complete all IOs before .bdrv_truncate"
- brdv_truncate() is also called from readv/writev commands on self-
growing file based storage. this will result in re... - 06:51 pm Revision 787e4a85: block: Add options QDict to bdrv_file_open() prototypes
- The new parameter is unused yet.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat... - 05:09 pm Revision 01ed1d52: qdev: remove redundant abort()
- Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: liguang <lig.fnst@cn.fujitsu.com>
Signed-off-by: Stefan... - 05:09 pm Revision 082369e6: gitignore: ignore more files
- ignore *.patch, *.gcda, *.gcno
Signed-off-by: liguang <lig.fnst@cn.fujitsu.com>
Reviewed-by: Andreas Färber <afaerbe... - 04:55 pm Revision 294e4669: Use proper term in TCG README
- In TCG, "target" means the host architecture for which TCG generates
the code. Using "guest" rather than "target" to ... - 04:28 pm Revision 9ca3f7f3: target-ppc: Use NARROW_MODE macro for tlbie
- Removing conditional compilation in the process.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: A... - 04:28 pm Revision c791fe84: target-ppc: Use NARROW_MODE macro for addresses
- Removing conditional compilation in the process.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: A... - 04:28 pm Revision e0c8f9ce: target-ppc: Use NARROW_MODE macro for branches
- Removing conditional compilation in the process.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: A... - 04:28 pm Revision 79482e5a: target-ppc: Fix add and subf carry generation in narrow mode
- The set of computations used in b5a73f8d8a57e940f9bbeb399a9e47897522ee9a
are only valid if the current word size == t... - 04:28 pm Revision 02765534: target-ppc: Use NARROW_MODE macro for comparisons
- Removing conditional compilation in the process.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: A... - 04:28 pm Revision 5883d8b2: mmu-hash*: Don't use full ppc_hash{32, 64}_translate() path for get_phys_page_...
- Currently the hash mmu versionsof get_phys_page_debug() use the same
ppc64_hash64_translate() function to do the tran... - 04:28 pm Revision 75d5ec89: mmu-hash*: Correctly mask RPN from hash PTE
- BEHAVIOUR CHANGE
At present we take the whole of word 1 of the hash PTE as the real page
number used to calculate th... - 04:28 pm Revision eb20c1c6: target-ppc: Move ppc tlb_fill implementation into mmu_helper.c
- For softmmu builds the interface from the generic code to the target
specific MMU implementation is through the tlb_f... - 04:28 pm Revision b632a148: target-ppc: Use QOM method dispatch for MMU fault handling
- After previous cleanups, the many scattered checks of env->mmu_model in
the ppc MMU implementation have, at least for... - 04:28 pm Revision cc8eae8a: target-ppc: Split user only code out of mmu_helper.c
- mmu_helper.c is, for obvious reasons, almost entirely concerned with
softmmu builds of qemu. However, it does contai... - 04:28 pm Revision caa597bd: mmu-hash*: Merge translate and fault handling functions
- ppc_hash{32,64}_handle_mmu_fault() is now the only caller of
ppc_hash{32,64{_translate(), so this patch combines them... - 04:28 pm Revision f80872e2: mmu-hash64: Implement Virtual Page Class Key Protection
- Version 2.06 of the Power architecture describes an additional page
protection mechanism. Each virtual page has a "c... - 04:28 pm Revision e1a53ba2: mmu-hash32: Remove nx from context structure
- Previous cleanups have meant the nx field of the mmu_ctx_hash32 structure
is now only used within ppc_hash32_translat... - 04:28 pm Revision 57d0a39d: mmu-hash64: Factor SLB N bit into permissions bits
- BEHAVIOUR CHANGE
Currently, for 64-bit hash mmu, the execute protection bit placed into the
qemu tlb is based only o... - 04:28 pm Revision 6d11d998: mmu-hash*: Clean up real address calculation
- More recent 64-bit hash MMUs support multiple page sizes, and PTEs for
large pages only include the offset of the who... - 04:28 pm Revision b3440746: mmu-hash*: Clean up PTE flags update
- Currently the ppc_hash{32,64}_pte_update_flags() helper functions update a
PTE's referenced and changed bits as neces... - 04:28 pm Revision 87dc3fd1: mmu-hash*: Don't update PTE flags when permission is denied
- BEHAVIOUR CHANGE
Currently if ppc_hash{32,64}_translate() finds a PTE matching the given
virtual address, it will al... - 04:28 pm Revision e01b4445: mmu-hash*: Clean up permission checking
- Currently checking of PTE permission bits is split messily amongst
ppc_hash{32,64}_pp_check(), ppc_hash{32,64}_check_... - 04:28 pm Revision 6fc76aa9: mmu-hash32: Clean up BAT matching logic
- The code to search for a matching BAT for a virtual address is somewhat
longwinded and awkward. In particular, it re... - 04:28 pm Revision e1d49515: mmu-hash32: Split BAT size logic from permissions logic
- hash32_bat_size_prot() and its 601 variant, as the name suggests, returns
both a BAT's size - needed to search for a ... - 04:28 pm Revision 145e52f3: mmu-hash32: Cleanup BAT lookup
- This patch makes a general cleanup of the ppc_hash32_get_bat() function,
renaming it to ppc_hash32_bat_lookup(). In ... - 04:28 pm Revision 6a980110: mmu-hash*: Fold pte_check*() logic into caller
- With previous cleanups made, the 32-bit and 64-bit pte_check*() functions
are pretty trivial and only have one call s... - 04:28 pm Revision 59acbe28: mmu-hash32: Don't look up page tables on BAT permission error
- BEHAVIOUR CHANGE
Currently, on any failure translating an address with BATs, we proceed to
normal segment and page t... - 04:28 pm Revision 9986ed1e: mmu-hash32: Remove odd pointer usage from BAT code
- In the code for handling BATs, the hash32_bat_size_prot() and
hash32_bat_601_size_prot() functions are passed the BAT... - 04:28 pm Revision 7f3bdc2d: mmu-hash*: Remove permission checking from find_pte{32, 64}()
- find_pte{32,64}() are poorly named, since they both find a PTE and do
permissions checking of it. This patch makes t... - 04:28 pm Revision a1ff751a: mmu-hash*: Make find_pte{32, 64} do more of the job of finding ptes
- find_pte{32,64}() are not particularly well named. They only "find" a PTE
within a given PTE group, and they also do... - 04:28 pm Revision aea390e4: mmu-hash*: Separate PTEG searching from permissions checking
- find_pte{32,64{() do several things. First they search through a PTEG
ooking for a PTE matching our virtual address.... - 04:28 pm Revision f95d7cc7: mmu-hash*: Don't keep looking for PTEs after we find a match
- BEHAVIOUR CHANGE
The ppc hash mmu hashes each virtual address to a primary and secondary
possible hash bucket (aka P... - 04:28 pm Revision 18148898: mmu-hash64: Clean up ppc_hash64_htab_lookup()
- This patch makes a general cleanup of the address mangling logic in
ppc_hash64_htab_lookup(). In particular it now a... - 04:28 pm Revision ba36ed10: mmu-hash64: Remove nx from mmu_ctx_hash64
- The nx field in mmu_ctx_hash64 is used in two different functions. But its
used for slightly different things in eac... - 04:28 pm Revision 723ed73a: mmu-hash32: Split direct store segment handling into a helper
- This further separates the unusual case handling of direct store segments
from the main translation path by moving it... - 04:28 pm Revision f078cd46: mmu-hash*: Remove eaddr field from mmu_ctx_hash{32, 64}
- The eaddr field of mmu_ctx_hash{32,64} is effectively just used to pass the
effective address from get_segment{32,64}... - 04:28 pm Revision 65d61643: mmu-hash*: Combine ppc_hash{32, 64}_get_physical_address and get_segment{32, 6...
- After previous work, ppc_hash{32,64}_get_physical_address() are almost
trivial wrappers around get_segment{32,64}() w... - 04:28 pm Revision 4b9605a5: mmu-hash32: Split out handling of direct store segments
- At present a large chunk of ppc_hash32_translate() is taken up with an
ugly if selecting between direct store segment... - 04:28 pm Revision 91cda45b: mmu-hash*: Reduce use of access_type
- In ppc env->access_type is updated by e.g. integer load/stores with
ACCESS_INT floating point load/stores with ACCESS... - 04:28 pm Revision bb218042: mmu-hash*: Cleanup segment-level NX check
- On the ppc hash mmus, no-execute can be set at the segment level (on more
recent 64-bit hash mmus it can also be set ... - 04:28 pm Revision f2ad6be8: target-ppc: Disentangle hash mmu versions of cpu_get_phys_page_debug()
- cpu_get_phys_page_debug() is a trivial wrapper around
get_physical_address(). But even the signature of
get_physical... - 04:28 pm Revision 98132796: target-ppc: Disentangle BAT code for 32-bit hash MMUs
- The functions for looking up BATs (Block Address Translation - essentially
a level 0 TLB) are shared between the clas... - 04:28 pm Revision dffdaf61: mmu-hash*: Add hash pte load/store helpers
- On real hardware the ppc hash page table is stored in memory; accordingly
our mmu emulation code can read a hash page... - 04:28 pm Revision 5dc68eb0: target-ppc: mmu_ctx_t should not be a global type
- mmu_ctx_t is currently defined in cpu.h. However it is used for temporary
information relating to mmu translation, a... - 04:28 pm Revision 496272a7: target-ppc: Disentangle hash mmu helper functions
- The newly separated paths for hash mmus rely on several helper functions
which are still shared with 32-bit hash mmus... - 04:28 pm Revision d5aea6f3: mmu-hash*: Add header file for definitions
- Currently cpu.h contains a number of definitions relating to the 64-bit
hash MMU. Some are used in the MMU emulation... - 04:28 pm Revision 59191721: target-ppc: Don't share get_pteg_offset() between 32 and 64-bit
- The get_pteg_offset() helper function is currently shared between 32-bit
and 64-bit hash mmus, taking a parameter for... - 04:28 pm Revision c69b6151: target-ppc: Disentangle find_pte()
- 32-bit and 64-bit hash MMU implementations currently share a find_pte
function. This results in a whole bunch of ugl... - 04:28 pm Revision 0480884f: target-ppc: Disentangle get_segment()
- The poorly named get_segment() function handles most of the address
translation logic for hash-based MMUs. It has ma... - 04:28 pm Revision 9d7c3f4a: target-ppc: Disentangle pte_check()
- Currently support for both 32-bit and 64-bit hash MMUs share an
implementation of pte_check. But there are enough di... - 04:28 pm Revision 44bc9107: target-ppc: Rework get_physical_address()
- Currently get_physical_address() first checks to see if translation is
enabled in the MSR, then in the translation on... - 04:28 pm Revision 629bd516: target-ppc: Disentangle get_physical_address() paths
- Depending on the MSR state, for 64-bit hash MMUs, get_physical_address
can either call check_physical (which has furt... - 04:28 pm Revision 25de24ab: target-ppc: Disentangle hash mmu paths for cpu_ppc_handle_mmu_fault
- cpu_ppc_handle_mmu_fault() calls get_physical_address() (whose behaviour
depends on MMU type) then, if that fails, is... - 04:28 pm Revision 8152ceaf: target-ppc: Remove address check for logging
- One LOG_MMU statement in mmu_helper.c has an odd check on the effective
address being translated. I can see no reaso... - 04:28 pm Revision 10b46525: target-ppc: Move SLB handling into a mmu-hash64.c
- As a first step to disentangling the handling for 64-bit hash MMUs from
the rest, we move the code handling the Segme... - 04:28 pm Revision d6478bc7: PPC/GDB: handle read and write of fpscr
- Although the support of this register may be uncomplete, there are no
reason to prevent the debugger from reading or ... - 04:28 pm Revision 9baea4a3: target-ppc: Remove vestigial PowerPC 620 support
- The PowerPC 620 was the very first 64-bit PowerPC implementation, but
hardly anyone ever actually used the chips. qe... - 04:28 pm Revision 213c7180: target-ppc: Trivial cleanups in mmu_helper.c
- This removes the never-used pte64_invalidate() function, and makes
ppcmas_tlb_check() static, since it's only used wi... - 04:28 pm Revision 89dfd6e1: pseries: Remove "busname" property for PCI host bridge
- Currently the "spapr-pci-host-bridge" device has a "busname" property which
can be used to override the default assig... - 04:28 pm Revision 7b565160: pseries: Move XICS initialization before cpu initialization
- Currently, the pseries machine initializes the cpus, then the XICS
interrupt controller. However, to support the upc... - 04:28 pm Revision a4e044c3: pseries: Fix breakage in CPU QOM conversion
- Commit 259186a7d2f7184efc96ae99bc5658e6159f53ad "cpu: Move halted and
interrupt_request fields to CPUState" broke the... - 04:28 pm Revision c6304a4a: target-ppc: Remove CONFIG_PSERIES dependency in kvm.c
- target-ppc/kvm.c has an #ifdef on CONFIG_PSERIES, for the handling of
KVM exits due to a PAPR hypercall from the gues... - 02:30 pm Revision 8b4a8988: serial: Fix debug format strings
- This fixes the build of hw/serial.c with DEBUG_SERIAL enabled.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-o... - 02:25 pm Revision 085d8134: Fix typos and misspellings
- Fix various typos and misspellings. The bulk of these were found with
codespell.
Signed-off-by: Peter Maydell <peter... - 02:23 pm Revision a7b66fa7: Advertise --libdir in configure --help output
- The configure script allows you to supply a libdir via --libdir but was
not advertising this in --help.
Signed-off-b... - 02:21 pm Revision 2c7cfd65: memory: fix a bug of detection of memory region collision
- The collision reports before and after this patch are:
before:
warning: subregion collision cfc/4 (pci-conf-data) v... - 02:14 pm Revision 9957fc7f: MinGW: Replace setsockopt by qemu_setsocketopt
- Instead of adding missing type casts which are needed by MinGW for the
4th argument, the patch uses qemu_setsockopt w...
03/20/2013
- 09:27 am Revision fe42d7fb: virtio-ccw, s390-virtio: Use generic virtio-blk macro.
- Now that virtio-ccw and s390-virtio define all common properties
for virtio-blk, we can switch to using the generic
D... - 09:22 am Revision da0a58b9: s390-virtio, virtio-ccw: Add config_wce for virtio-blk.
- There's no reason why we wouldn't want to make the cache mode
configurable.
Acked-by: Alexander Graf <agraf@suse.de>... - 09:21 am Revision 131cd737: virtio-ccw: Add missing blk chs properties.
- Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
03/19/2013
- 06:34 pm Revision afed2608: microblaze: Ignore non-cpu accesses to unmapped areas
- Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
- 03:01 pm Revision f7d42093: Merge remote-tracking branch 'kraxel/ipxe.2' into staging
- # By Gerd Hoffmann
# Via Gerd Hoffmann
* kraxel/ipxe.2:
Switch to efi-enabled nic roms by default
Add efi rom bin... - 03:00 pm Revision c8a6ae8b: add a boot option to do strict boot
- Seabios already added a new device type to halt booting.
Qemu can add "HALT" at the end of bootindex string, then
sea... - 02:59 pm Revision 8510d91e: ui/cocoa.m: Fix compile failures introduced by recent console changes
- Fix various compilation failures introduced by the recent console
changes.
Signed-off-by: Peter Maydell <peter.mayde... - 02:58 pm Revision 277ba8a6: Merge remote-tracking branch 'kwolf/for-anthony' into staging
- # By Stefan Hajnoczi (2) and others
# Via Kevin Wolf
* kwolf/for-anthony:
virtio-blk: Do not segfault fault if fail... - 02:56 pm Revision 2c8a5942: char: Fix return type of qemu_chr_fe_add_watch()
- qemu_chr_fe_add_watch() can return negative errors, therefore it must
not have an unsigned return type. For consisten... - 02:52 pm Revision f628926b: fix monitor
- chardev flow control broke monitor, fix it by adding watch support.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.... - 12:48 pm Revision a8e5cc0c: virtio-blk: Do not segfault fault if failed to initialize dataplane
- $ ~/usr/bin/qemu-system-x86_64 -enable-kvm -m 1024 -drive if=none,id=drive0,cache=none,aio=native,format=raw,file=/ro...
- 12:48 pm Revision f95e26dd: qemu-iotests: add 052 BDRV_O_SNAPSHOT test
- Check that writes to an image opened with BDRV_O_SNAPSHOT do not modify
the underlying image file.
Signed-off-by: St... - 12:48 pm Revision 4d70655b: block: fix BDRV_O_SNAPSHOT protocol detection
- realpath(3) is used to get an absolute path to the image file when
creating a -drive snapshot=on temporary qcow2. Th... - 12:48 pm Revision fca23f0a: sheepdog: show error message for halt status
- Sheepdog (neither quorum nor unsafe mode) will refuse to serve IO requests when
number of alive nodes is less than th... - 12:48 pm Revision acdfb480: qcow2: Fix segfault in qcow2_invalidate_cache
- Need to pass an options QDict to qcow2_open() now. This fixes a segfault
on the migration target with qcow2.
Signed-...
03/18/2013
- 08:40 pm Revision b92e062a: target-lm32: fix debug memory access
- CPU models which have the LM32_FLAG_IGNORE_MSB flag set will shadow the
lower 2GB to the upper 2GB memory space. This... - 08:40 pm Revision 6036e9d8: tests: tcg: lm32: add more test cases
- Esp. for testing zero/sign extend in compare operations.
Signed-off-by: Michael Walle <michael@walle.cc> - 08:40 pm Revision 562f5f5d: lm32_uart: fix receive buffering
- Inform qemu-char when more input data can be received.
Signed-off-by: Michael Walle <michael@walle.cc> - 08:40 pm Revision 608a03c1: target-lm32: don't log cpu state in translation
- Don't dump the cpu state because it can also be enabled by the "-d cpu"
parameter.
Signed-off-by: Michael Walle <mic... - 08:40 pm Revision 66350755: target-lm32: use HELPER() macro
- Instead of hardcoding the function name, use the HELPER() macro for this.
Signed-off-by: Michael Walle <michael@wall... - 08:40 pm Revision d3fcbb16: configure: proper OpenGL/GLX probe
- Probe for GL and GLX symbols and X11 library. This fixes a build error
where the header files are available but the l... - 08:40 pm Revision df5eb7d2: target-lm32: fix cmpgui and cmpgeui opcodes
- For unsigned compares the immediate has to be zero extended.
Signed-off-by: Michael Walle <michael@walle.cc> - 08:40 pm Revision de55c4bd: target-lm32: remove dead code
- Signed-off-by: Michael Walle <michael@walle.cc>
- 08:40 pm Revision ab2b9f17: lm32-dis: fix NULL pointer dereference
- Signed-off-by: Michael Walle <michael@walle.cc>
- 08:40 pm Revision 44ac582d: milkymist-uart: fix receive buffering
- Inform qemu-char when more input data can be received.
Signed-off-by: Michael Walle <michael@walle.cc> - 08:40 pm Revision b1e5fff4: configure: rename OpenGL feature to GLX
- As the probe now actually checks for the availability of GLX, rename it
accordingly. The only user of this feature is... - 08:40 pm Revision a5b0f6d5: target-lm32: flush tlb after clearing env
- The tlb data is stored within the CPU env. Therefore, the initialization
has to be done after we clear the environmen... - 08:08 pm Revision 2d62a957: virtio-blk: cleanup: remove qdev field.
- The qdev field is no longer needed, just drop it.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Reviewe... - 08:08 pm Revision 1cc91b7d: virtio-blk: cleanup: QOM cast
- Use QOM casts inside virtio-blk.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Reviewed-by: Peter Mayde... - 08:08 pm Revision 3400c455: virtio-blk-ccw switch to new API.
- Here the virtio-ccw-s390 is modified for the new API. The device
virtio-ccw-s390 extends virtio-ccw-device as before.... - 08:08 pm Revision 653ced07: virtio-blk-pci: switch to new API.
- Here the virtio-blk-pci is modified for the new API. The device
virtio-blk-pci extends virtio-pci. It creates and con... - 08:08 pm Revision 55d11e01: virtio-blk-s390: switch to the new API.
- Here the virtio-blk-s390 is modified for the new API. The device
virtio-blk-s390 extends virtio-s390-device as before... - 08:08 pm Revision 05ff6865: virtio-blk: cleanup: init and exit functions.
- As all virtio-blk-* are switched to the new API, we can remove the separate
init/exit for the old API.
Signed-off-by... - 08:08 pm Revision 1c028ddf: virtio-blk: add the virtio-blk device.
- Create virtio-blk which extends virtio-device, so it can be connected on
virtio-bus.
Signed-off-by: KONRAD Frederic ... - 08:08 pm Revision da3dcefa: virtio-blk: don't use pointer for configuration.
- The configuration field must not be a pointer as it will be used for virtio-blk
properties. So *blk is replaced by bl... - 08:08 pm Revision f1b24e84: virtio: make virtio device's structures public.
- These structures must be made public to avoid two memory allocations for
refactored virtio devices.
Signed-off-by: K... - 08:08 pm Revision 10479a80: virtio-pci: fix hot unplug.
- Hot unplug failed because it tried to free the virtio device two times.
This fix the issue by removing the call to v... - 08:08 pm Revision cbd19063: virtio-x-bus: fix allow_hotplug assertion.
- This set allow_hotplug for each existing virtio-x-bus, allowing the
refactored devices to be hot pluggable.
Signed-o... - 02:34 pm Revision e531761d: Merge remote-tracking branch 'kraxel/pixman.v8' into staging
- # By Gerd Hoffmann (18) and others
# Via Blue Swirl (1) and Gerd Hoffmann (1)
* kraxel/pixman.v8: (37 commits)
cons... - 11:21 am Revision 1562e531: console: remove ds_get_* helper functions
- Switch the few remaining ds_get_* uses in console.c over to the new
surface_* accessors.
While doing so tripped over... - 11:21 am Revision cf6f0548: console: zap color_table
- qemu_create_surface hands out 32bpp surfaces.
So we can just use color_table_rgb directly.
Signed-off-by: Gerd Hoffm... - 11:21 am Revision bc2ed970: console: zap displaystate from dcl callbacks
- Now that nobody depends on DisplayState in DisplayChangeListener
callbacks any more we can remove the parameter from ... - 11:21 am Revision c78f7137: console: stop using DisplayState in gfx hardware emulation
- Use QemuConsole instead. Updates interfaces in console.[ch] and adapts
gfx hardware emulation code.
Signed-off-by: ... - 11:21 am Revision 8db9bae9: sdl: stop using DisplayState
- Rework DisplayStateListener callbacks to not use the DisplayState
any more.
Signed-off-by: Gerd Hoffmann <kraxel@red... - 11:21 am Revision 71874c17: spice: stop using DisplayState
- Rework DisplayStateListener callbacks to not use the DisplayState
any more.
Signed-off-by: Gerd Hoffmann <kraxel@red... - 11:21 am Revision 5e00d3ac: cocoa: stop using DisplayState
- Rework DisplayStateListener callbacks to not use the DisplayState
any more.
Signed-off-by: Gerd Hoffmann <kraxel@red... - 11:21 am Revision 9d9801cf: gtk: stop using DisplayState
- Rework DisplayStateListener callbacks to not use the DisplayState
any more. Factor out the window size handling to a... - 11:21 am Revision 7c20b4a3: console: fix displaychangelisteners interface
- Split callbacks into separate Ops struct. Pass DisplayChangeListener
pointer as first argument to all callbacks. Un... - 11:21 am Revision 9c80a315: spice: zap sdpy global
- DisplayChangeListener is passed now to all DisplayChangeListenerOps
callbacks, so we can use that to access the spice... - 11:21 am Revision 468dfd6d: sdl: drop dead code
- DisplayAllocator removal (commit
187cd1d9f30d13f0d0ef682e4d91cfa3e4cbd472) made this a nop.
Signed-off-by: Gerd Hoff... - 11:21 am Revision 21ef45d7: console: kill DisplayState->opaque
- It's broken by design. There can be multiple DisplayChangeListener
instances, so they simply can't store state in th... - 11:21 am Revision 626e3b34: console: add surface_*() getters
- Add convinence wrappers to query DisplaySurface properties.
Simliar to ds_get_*, but operating in the DisplaySurface
... - 11:21 am Revision c099e7aa: qxl: better vga init in enter_vga_mode
- Ask the vga core to update the display. Will trigger dpy_gfx_resize
if needed. More complete than just calling dpy_... - 11:21 am Revision da229ef3: console: rework DisplaySurface handling [vga emu side]
- Decouple DisplaySurface allocation & deallocation from DisplayState.
Replace dpy_gfx_resize + dpy_gfx_setdata with a ... - 11:21 am Revision d39fa6d8: vnc: stop using DisplayState
- Rework DisplayStateListener callbacks to not use the DisplayState
any more.
Signed-off-by: Gerd Hoffmann <kraxel@red... - 11:21 am Revision c6c06853: qxl: zap qxl0 global
- DisplayChangeListener is passed now to all DisplayChangeListenerOps
callbacks, so we can use that to access the qxl s... - 11:21 am Revision c12aeb86: console: rework DisplaySurface handling [dcl/ui side]
- Replace the dpy_gfx_resize and dpy_gfx_setdata DisplayChangeListener
callbacks with a dpy_gfx_switch callback which n... - 11:21 am Revision 2f3f430d: Add Makefile rules to build nic rom binaries with efi support
- "make -C roms efirom" will build rom binaries with EFI support.
They are composed from three images: legacy bios, efi... - 11:21 am Revision 8a24d3cb: Add efi rom binaries
- Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
- 11:21 am Revision c3d8dab3: Update ipxe submodule to latest master
- Needed for efi support.
ipxe is grown a bit, so *not* recompiling the (non-efi) pxe roms
because that would make som... - 11:21 am Revision c45e5b5b: Switch to efi-enabled nic roms by default
- All PCI nics are switched to EFI-enabled roms by default. They are
composed from three images (legacy, efi ia32 & ef... - 11:21 am Revision 2397edd7: Add Makefile rules to build nic rom binaries
- "make -C roms pxerom" will build the ipxe roms and update
the binaries in pc-bios/, i.e. it basically documents how
t...
03/17/2013
- 10:01 pm Revision 225dc991: s390: Fix cpu refactoring fallout.
- Commit 259186a7 "cpu: Move halted and interrupt_request fields to CPUState"
seems to have missed one instance in targ... - 07:44 pm Revision 7fb73775: Merge branch 'arm-devs.next' of git://git.linaro.org/people/pmaydell/qemu-arm
- * 'arm-devs.next' of git://git.linaro.org/people/pmaydell/qemu-arm:
xilinx_spips: QOM styling fixes
xilinx_spips:... - 01:27 pm Revision 0402a5d6: qdev: DEVICE_DELETED event
- libvirt has a long-standing bug: when removing the device,
it can request removal but does not know when the
removal ... - 02:06 am Revision 8b758d05: target-mips: fix rndrashift_short_acc and code for EXTR_ instructions
- Fix for rndrashift_short_acc to set correct value to higher 64 bits.
This change also corrects conditions when bit 23...
03/15/2013
- 06:41 pm Revision e0891bd8: xilinx_spips: Fix bus setup conditional check
- The R_LQPSI_CFG register has the LQSPI_CFG_SEP_BUS and LQSPI_CFG_TWO_MEM bits.
Signed-off-by: Nathan Rossi <nathan.r... - 06:41 pm Revision f8b9fe24: xilinx_spips: QOM styling fixes
- Few fixes for the latest QOM styling guides.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message... - 06:41 pm Revision 08a9635b: xilinx_spips: Add missing dual-bus snoop commands
- Added additional commands to the switch to check for when snooping commands in
dual bus mode setups. Cleaned up code ... - 06:41 pm Revision 6ff66f50: iov: Factor out hexdumper
- Factor out the hexdumper functionality from iov for all to use. Useful for
creating verbose debug printfery that dump... - 06:41 pm Revision 06a1cea5: pl330: Initial version
- Device model for Primecell PL330 DMA controller.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Sig... - 06:41 pm Revision 2790cd91: xilinx_spips: Set unused IRQs to NULL
- Unused CS lines should init to 0 to avoid segfaulting when accessing an
unattached QSPI controller.
Signed-off-by: P... - 06:41 pm Revision 9c7d4893: hw/vexpress: Set reset values for daughterboard oscillators
- Set the reset values for the VExpress daughterboard oscillators
via the new sysctl properties.
Signed-off-by: Peter ... - 06:41 pm Revision 7451afb6: xilinx_zynq: added pl330 to machine model
- Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>... - 06:41 pm Revision 1f81f94b: hw/arm_sysctl: Implement SYS_CFG_OSC function
- Implement the SYS_CFG_OSC function. Since the idea of
programmable clock rates doesn't make much sense for QEMU,
we s... - 06:41 pm Revision 31410948: hw/vexpress: Pass voltage sensor properties to sysctl device
- Pass voltage sensor properties to the sysctl device. Since
these are daughterboard specific, we specify them via the
... - 06:41 pm Revision 0be6bfac: qdev: Implement (variable length) array properties
- Add support for declaring array properties for qdev devices.
These work by defining an initial static property 'len-a... - 06:41 pm Revision 8bd4824a: hw/arm_sysctl: Implement SYS_CFG_VOLT
- Implement the SYS_CFG_VOLT registers which return the voltage
of various supplies on motherboard and daughterboard. S... - 06:41 pm Revision 71538323: hw/arm_sysctl: Handle SYS_CFGCTRL in a more structured way
- The SYS_CFGCTRL register consists of separate fields
for DCC, function, site, position and device, as well
as a read/... - 06:41 pm Revision cdef10bb: hw/vexpress: Pass proc_id via VEDBoardInfo
- Pass the daughterboard-specific proc_id property to the code that
creates the sysctl device via the VEDBoardInfo stru... - 06:41 pm Revision 1f56f50a: hw/arm_sysctl: Convert from qdev init to instance_init
- Convert this device from old-style qdev init to an instance_init
function. We don't need a realize function yet, thou... - 06:41 pm Revision 8ff05c98: hw/arm_sysctl: Implement SYS_CFG_MUXFPGA writes as a no-op
- SYS_CFG_MUXFPGA allows the guest to select whether the
video output should come from the motherboard's LCD
controller... - 06:41 pm Revision 291155cb: hw/arm_sysctl: Implement SYS_CFG_DVIMODE as a no-op
- SYS_CFG_DVIMODE allows the guest to select whether the
output DVI signal is VGA, SVGA, XGA, SGA or UXGA. Since
this m... - 06:36 pm Revision b1999e87: Fix TAGS creation
- Currently the Makefile creates TAGS for emacs with the command:
find "$(SRC_PATH)" -name '*.[hc]' -print0 | xargs... - 05:47 pm Revision dc0b0616: Merge remote-tracking branch 'stefanha/block' into staging
- # By Stefan Hajnoczi (14) and others
# Via Stefan Hajnoczi
* stefanha/block: (28 commits)
blockdev: Fix up copyrigh... - 05:47 pm Revision d4d76824: Merge remote-tracking branch 'cohuck/virtio-ccw-upstr' into staging
- # By Christian Borntraeger (1) and Cornelia Huck (1)
# Via Cornelia Huck
* cohuck/virtio-ccw-upstr:
virtio-ccw: Wir... - 05:07 pm Revision acbf30ec: qemu-iotests: add tests for rebasing zero clusters
- If zero clusters are erroneously treated as unallocated, "qemu-img rebase"
will copy the backing file's contents onto... - 05:07 pm Revision 28f08246: coroutine: use AioContext for CoQueue BH
- CoQueue uses a BH to awake coroutines that were made ready to run again
using qemu_co_queue_next() or qemu_co_queue_r... - 05:07 pm Revision 804dd417: qemu-iotests: use -nographic in test case 007
- A comment explains that -nographic hangs test case 007. This is no
longer the case so add -nographic. This makes th... - 05:07 pm Revision 85d126f3: block: add bdrv_get_aio_context()
- For now bdrv_get_aio_context() is just a stub that calls
qemu_aio_get_context() since the block layer is currently ti... - 05:07 pm Revision 485e3ce8: dataplane: fix hang introduced by AioContext transition
- The bug is that the EventNotifiers do have a NULL io_flush callback.
Because _none_ of the callbacks on the dataplane... - 05:07 pm Revision c4d9d196: threadpool: drop global thread pool
- Now that each AioContext has a ThreadPool and the main loop AioContext
can be fetched with bdrv_get_aio_context(), we... - 05:07 pm Revision 3618a094: blockdev: Fix up copyright and permission notice
- Screwed up in commit 666daa68. Thanks to Kevin Wolf for reminding me
to fix this.
Signed-off-by: Markus Armbruster ... - 05:07 pm Revision 0d6db300: sheepdog: use non-blocking fd in coroutine context
- Using a blocking socket in the coroutine context reduces the chance of
switching to other work. This patch makes the... - 05:07 pm Revision c1f5bafd: qcow2: set L2 cache dependency in qcow2_alloc_bytes()
- Compressed writes use qcow2_alloc_bytes() to allocate space with byte
granularity. The affected clusters' refcounts ... - 05:07 pm Revision ed9ba724: sheepdog: set io_flush handler in do_co_req
- If an io_flush handler is not set, qemu_aio_wait doesn't invoke
callbacks.
Signed-off-by: MORITA Kazutaka <morita.ka... - 05:07 pm Revision f7311ccc: threadpool: add thread_pool_new() and thread_pool_free()
- ThreadPool is tied to an AioContext through its event notifier, which
dictates in which AioContext the work item's ca... - 05:07 pm Revision f9cb2860: qcow2: drop flush in update_cluster_refcount()
- The update_cluster_refcount() function increments/decrements a cluster's
refcount and then returns the new refcount v... - 05:07 pm Revision 381b487d: qcow2: make is_allocated return true for zero clusters
- Otherwise, live migration of the top layer will miss zero clusters and
let the backing file show through. This also ... - 05:07 pm Revision 2154f24e: qcow2: flush in qcow2_update_snapshot_refcount()
- Users of qcow2_update_snapshot_refcount() do not flush consistently.
qcow2_snapshot_create() flushes but qcow2_snapsh... - 05:07 pm Revision 36479179: qcow2: drop unnecessary flush in qcow2_update_snapshot_refcount()
- We already flush when the function completes. There is no need to flush
after every compressed cluster.
Signed-off-... - 05:07 pm Revision f6977f15: qcow2: flush refcount cache correctly in qcow2_write_snapshots()
- Since qcow2 metadata is cached we need to flush the caches, not just the
underlying file. Use bdrv_flush(bs) instead... - 05:07 pm Revision 5f3aa1ff: main-loop: add qemu_get_aio_context()
- It is very useful to get the main loop AioContext, which is a static
variable in main-loop.c.
I'm not sure whether q... - 05:07 pm Revision b811203c: threadpool: move globals into struct ThreadPool
- Move global variables into a struct so multiple thread pools can be
supported in the future.
This patch does not cha... - 05:07 pm Revision 9b34277d: aio: add a ThreadPool instance to AioContext
- This patch adds a ThreadPool to AioContext. It's possible that some
AioContext instances will never use the ThreadPo... - 05:07 pm Revision 9991923b: qcow2: flush refcount cache correctly in alloc_refcount_block()
- update_refcount() affects the refcount cache, it does not write to disk.
Therefore bdrv_flush(bs->file) does nothing.... - 05:07 pm Revision bb44619b: blockdev: Keep a copy of DriveInfo.serial
- Pointing to a QemuOpts element is surprising and can lead to subtle
use-after-free errors when the QemuOpts is freed ... - 05:07 pm Revision b6ad491a: block: Add options QDict to bdrv_open_common()
- The options are passed down to the block drivers, which are supposed to
remove all options they have processed. Anyth... - 05:07 pm Revision b382bc9a: Add qdict_clone_shallow()
- Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi... - 05:07 pm Revision 1a86938f: block: Add options QDict to .bdrv_open()
- Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi... - 05:07 pm Revision 0006383e: block: Support driver specific options in drive_init()
- Any non-default -drive options are now passed down to the block drivers.
Signed-off-by: Kevin Wolf <kwolf@redhat.com... - 05:07 pm Revision de9c0cec: block: Add options QDict to bdrv_open() prototype
- It doesn't do anything yet except storing the options QDict in the
BlockDriverState.
Signed-off-by: Kevin Wolf <kwol... - 05:07 pm Revision 74c4510a: qcow2: Allow lazy refcounts to be enabled on the command line
- qcow2 images now accept a boolean lazy_refcounts options. Use it like
this:
-drive file=test.qcow2,lazy_refcounts=... - 05:07 pm Revision 376609cc: qemu-option: Add qemu_opts_absorb_qdict()
- This adds a function that adds all entries of a QDict to a QemuOpts if
the keys are known, and leaves only the rest i... - 03:23 pm Revision 4f306496: qga/main.c: Don't use g_key_file_get/set_int64
- These functions don't exist until glib version 2.26. QEMU is currently only
mandating glib 2.12.
This patch replaces...
03/14/2013
- 09:54 pm Revision 139a4b63: Merge remote-tracking branch 'kraxel/chardev.5' into staging
- * kraxel/chardev.5:
spice-qemu-char: Remove dead debugging code
spice-qemu-char: Fix name parameter issues after ... - 09:50 pm Revision 3d34a411: Merge remote-tracking branch 'afaerber/qom-cpu' into staging
- # By Andreas Färber (16) and Igor Mammedov (1)
# Via Andreas Färber
* afaerber/qom-cpu:
target-lm32: Update VMState... - 09:50 pm Revision 0ec4a8e6: Merge remote-tracking branch 'mdroth/qga-pull-3-11-2013' into staging
- # By Laszlo Ersek (3) and others
# Via Michael Roth
* mdroth/qga-pull-3-11-2013:
qga: implement qmp_guest_set_vcpus... - 09:50 pm Revision 6582d3e8: Merge remote-tracking branch 'riku/linux-user-for-upstream' into staging
- # By Peter Maydell (5) and others
# Via Riku Voipio
* riku/linux-user-for-upstream:
linux-user/syscall.c: Don't war... - 10:46 am Revision 344bf1e9: spice-qemu-char: Remove dead debugging code
- Since commit d62e5f7036a018b2ad09f17ebd481bd28953d783
"chardev: add spice support to qapi"
It is impossible to set t... - 10:46 am Revision 5e9b473a: spice-qemu-char: Fix name parameter issues after qapi-ifying
- The strings passed in through the qapi calls are dynamic memory, since
we want to have them stick around longer then ...
03/13/2013
- 07:21 pm Revision c69b30e8: gtk: fix vc initialization
- commit 01f45d986fb0b7c2d4f0466efe3cde9708f325be
Author: Anthony Liguori <aliguori@us.ibm.com>
Date: Tue Mar... - 11:27 am Revision 46920825: Revert "hmp: Disable chardev-add and chardev-remove"
- This reverts commit 8a14952c9d2f5fa2b3caa6dc286b62ed5d26bca7.
- 11:27 am Revision e5545854: qemu-char.c: fix waiting for telnet connection message
- Current colon position in "waiting for telnet connection" message template
produces messages like:
QEMU waiting for c... - 11:27 am Revision e68c5958: chardev: switch pty init to qapi
- This patch switches over the pty chardev initialization
to the new qapi code path.
Bonus: Taking QemuOpts out of the... - 11:27 am Revision 3ecc059d: chardev: add udp support to qapi
- This patch adds 'udp' support to qapi.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> - 11:27 am Revision 0f1cb51d: chardev: switch serial/tty init to qapi
- This patch switches over the serial chardev initialization
to the new qapi code path.
Signed-off-by: Gerd Hoffmann <... - 11:27 am Revision 7c358031: chardev: add stdio support to qapi
- This patch adds 'stdio' support to qapi and also switches over the
stdio chardev initialization to the new qapi code ... - 11:27 am Revision d9ac374f: chardev: add console support to qapi
- This patch adds 'console' support to qapi and also switches over the
console chardev initialization to the new qapi c... - 11:27 am Revision f5a51cab: chardev: add msmouse support to qapi
- This patch adds 'msmouse' support to qapi and also switches over
the msmouse chardev initialization to the new qapi c... - 11:27 am Revision 1da48c65: chardev: add memory (ringbuf) support to qapi
- This patch adds 'memory' support to qapi and also switches over
the memory chardev initialization to the new qapi cod... - 11:27 am Revision 548cbb36: chardev: add pipe support to qapi
- This patch adds 'pipe' support to qapi and also switches over the
pipe chardev initialization to the new qapi code pa... - 11:27 am Revision 702ec69c: chardev: add vc support to qapi
- This patch adds 'vc' support to qapi and also switches over the
vc chardev initialization to the new qapi code path.
... - 11:27 am Revision 846e2e49: chardev: switch file init to qapi
- This patch switches over the 'file' chardev initialization
to the new qapi code path.
Signed-off-by: Gerd Hoffmann <... - 11:27 am Revision 2d57286d: chardev: add braille support to qapi
- This patch adds 'braille' support to qapi and also switches over
the braille chardev initialization to the new qapi c... - 11:27 am Revision cd153e2a: chardev: add spice support to qapi
- This patch adds 'spicevmc' and 'spiceport' support to qapi and also
switches over the spice chardev initialization to... - 11:27 am Revision dc375097: chardev: switch parallel init to qapi
- This patch switches over the parallel chardev initialization
to the new qapi code path.
Signed-off-by: Gerd Hoffmann... - 11:27 am Revision edb2fb3c: chardev: add mux chardev support to qapi
- This adds mux chardev support to the qapi and also makes the qapi-based
chardev creation path handle the "mux=on" opt... - 11:27 am Revision 80dca9e6: chardev: switch null init to qapi
- This patch switches over the 'null' chardev initialization
to the new qapi code path.
Signed-off-by: Gerd Hoffmann <... - 11:27 am Revision 2c5f4882: chardev: add support for qapi-based chardev initialization
- This patch add support for a new way to initialize chardev devices.
Instead of calling a initialization function with...
03/12/2013
- 08:42 pm Revision 8ca761f6: exec: make -mem-path filenames deterministic
- Adds ramblocks' names to their backing files when using -mem-path. Eases
introspection and debugging.
Signed-off-by... - 08:42 pm Revision 4524051c: Add search path support for qemu data files.
- This patch allows to specify multiple directories where qemu should look
for data files. To implement that the behav... - 08:40 pm Revision 4549a8b7: Add a TPM Passthrough backend driver implementation
- This patch is based of off version 9 of Stefan Berger's patch series
"QEMU Trusted Platform Module (TPM) integratio... - 08:40 pm Revision 92dcc234: Add support for cancelling of a TPM command
- This patch adds support for cancelling an executing TPM command.
In Linux for example a user can cancel a command thr... - 08:40 pm Revision 1272ec88: Build TPM passthrough for i386 and x86_64 targets
- Build the TPM passthrough driver only for i386 and x86_64 targets
using the default-configs files for those targets w... - 08:40 pm Revision ab214c29: Build the TPM frontend code
- Build the TPM frontend code that has been added so far.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Re... - 08:40 pm Revision 8db7c415: Add a debug register
- This patch uses the possibility to add a vendor-specific register and
adds a debug register useful for dumping the TI... - 08:40 pm Revision edff8678: Add TPM (frontend) hardware interface (TPM TIS) to QEMU
- This patch adds the main code of the TPM frontend driver, the TPM TIS
interface, to QEMU. The code is largely based o... - 08:40 pm Revision d1a0cf73: Support for TPM command line options
- This patch adds support for TPM command line options.
The command line options supported here are
./qemu-... -tpmdev... - 02:39 pm Revision 2362ecc5: virtio-ccw: Wire up virtio-rng.
- Make virtio-rng devices available for s390-ccw-virtio machines.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> - 02:39 pm Revision b8a205f2: virtio-ccw: remove qdev_unparent in unplug routing
- This patch fixes unplugging a virtio-ccw device. We no
longer need to do that in virtio-ccw since common code does no... - 11:35 am Revision 97a8ea5a: cpu: Replace do_interrupt() by CPUClass::do_interrupt method
- This removes a global per-target function and thus takes us one step
closer to compiling multiple targets into one ex... - 11:35 am Revision 259186a7: cpu: Move halted and interrupt_request fields to CPUState
- Both fields are used in VMState, thus need to be moved together.
Explicitly zero them on reset since they were locate... - 11:35 am Revision c3affe56: cpu: Pass CPUState to cpu_interrupt()
- Move it to qom/cpu.h to avoid issues with include order.
Change pc_acpi_smi_interrupt() opaque to X86CPU.
Signed-of... - 11:35 am Revision e6f010cc: target-arm: Override do_interrupt for ARMv7-M profile
- Enable ARMCPUInfo to specify a custom class_init functions.
Introduce arm_v7m_class_init() and use it for "cortex-m3"... - 11:35 am Revision d8ed887b: exec: Pass CPUState to cpu_reset_interrupt()
- Move it to qom/cpu.c to avoid build failures depending on include order
of cpu-qom.h and exec/cpu-all.h.
Change opaq... - 11:35 am Revision 0ad6773f: target-lm32: Update VMStateDescription to LM32CPU
- Add a vmstate_lm32_cpu referencing the previous VMStateDescription as a
sub-struct and hook it up to CPUClass::vmsd. ... - 11:35 am Revision f56e3a14: target-i386: Update VMStateDescription to X86CPU
- Expose vmstate_cpu as vmstate_x86_cpu and hook it up to CPUClass::vmsd.
Adapt opaques and VMState fields to X86CPU. D... - 11:35 am Revision b350ab75: target-sh4: Move PVR/PRR/CVR into SuperHCPUClass
- They are never changed once initialized, and moving them to the class
will allow to inspect them before instantiating... - 11:35 am Revision 1c8bb3cc: monitor: Use qemu_get_cpu() in monitor_set_cpu()
- No functional change, just a reduction of CPU loops.
The mon_cpu field is left untouched for now since changing that... - 11:35 am Revision ca91b15f: cpu: Introduce cpu_class_set_vmsd()
- This setter avoids redefining each VMStateDescription value to
vmstate_dummy by not referencing the value for CONFIG_... - 11:35 am Revision c71c3e99: stubs: Add a vmstate_dummy struct for CONFIG_USER_ONLY
- Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: An... - 11:35 am Revision b170fce3: cpu: Register VMStateDescription through CPUState
- In comparison to DeviceClass::vmsd, CPU VMState is split in two,
"cpu_common" and "cpu", and uses cpu_index as instan... - 11:35 am Revision d7650eab: vmstate: Make vmstate_register() static inline
- This avoids adding a duplicate stub for CONFIG_USER_ONLY.
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Review... - 11:35 am Revision c1b382e7: target-sh4: Introduce SuperHCPU subclasses
- Store legacy name in SuperHCPUClass for -cpu ? and for case-insensitive
class lookup.
List CPUs by iterating over TY... - 11:35 am Revision 21317bc2: target-cris/helper.c: Update Coding Style
- Reindent, add missing braces and drop/adjust whitespace.
Prepares for CPUArchState-to-CPUState field movements in
cp... - 11:35 am Revision 151d1322: cpus: Replace open-coded CPU loop in qmp_memsave() with qemu_get_cpu()
- No functional change, just less usages of first_cpu and next_cpu fields.
env is passed to cpu_memory_rw_debug(), whi... - 11:35 am Revision d76fddae: cpu: Fix qemu_get_cpu() to return NULL if CPU not found
- Commit 55e5c2850 breaks CPU not found return value, and returns
CPU corresponding to the last non NULL env.
Fix it by... - 01:58 am Revision cbb65fc2: qga: implement qmp_guest_set_vcpus() for Linux with sysfs
- Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Ro... - 01:58 am Revision d2baff62: qga: implement qmp_guest_get_vcpus() for Linux with sysfs
- Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Ro... - 01:57 am Revision 70e133a7: qga: introduce guest-get-vcpus / guest-set-vcpus with stubs
- Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Ro... - 01:53 am Revision 39097daf: qemu-ga: use key-value store to avoid recycling fd handles after restart
- Hosts hold on to handles provided by guest-file-open for periods that can
span beyond the life of the qemu-ga process... - 01:53 am Revision 6912e6a9: qga: add guest-get-time command
- Signed-off-by: Lei Li <lilei@linux.vnet.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Michael Rot... - 01:53 am Revision a1bca57f: qga: add guest-set-time command
- Signed-off-by: Lei Li <lilei@linux.vnet.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Michael Rot... - 01:53 am Revision 9e7c23db: qemu-ga: fix confusing GAChannelMethod comparison
- In commit 7868e26e5930f49ca942311885776b938dcf3b77
("qemu-ga: add initial win32 support") support was added for qemu-... - 01:53 am Revision c5dcb6ae: qemu-ga: make guest-sync-delimited available during fsfreeze
- We currently maintain a whitelist of commands that are safe during
fsfreeze. During fsfreeze, we disable all commands... - 01:53 am Revision ed2cbf74: qga: cast to int for DWORD type
- This patch fixes a compiler warning when cross-build:
qga/service-win32.c: In function 'printf_win_error':
qga/servi...
Also available in: Atom