Archipelago » qemu

/*

 * PXA270-based Intel Mainstone platforms.

 *

 * Copyright (c) 2007 by Armin Kuster <akuster@kama-aina.net> or

 *                                    <akuster@mvista.com>

 *

 * Code based on spitz platform by Andrzej Zaborowski <balrog@zabor.org>

 *

 * This code is licensed under the GNU GPL v2.

 */

#include "hw.h"

#include "pxa.h"

#include "arm-misc.h"

#include "net.h"

#include "devices.h"

#include "boards.h"

#include "mainstone.h"

#include "sysemu.h"

#include "flash.h"

static struct keymap map[0xE0] = {

    [0 ... 0xDF] = { -1, -1 },

    [0x1e] = {0,0}, /* a */

    [0x30] = {0,1}, /* b */

    [0x2e] = {0,2}, /* c */

    [0x20] = {0,3}, /* d */

    [0x12] = {0,4}, /* e */

    [0x21] = {0,5}, /* f */

    [0x22] = {1,0}, /* g */

    [0x23] = {1,1}, /* h */

    [0x17] = {1,2}, /* i */

    [0x24] = {1,3}, /* j */

    [0x25] = {1,4}, /* k */

    [0x26] = {1,5}, /* l */

    [0x32] = {2,0}, /* m */

    [0x31] = {2,1}, /* n */

    [0x18] = {2,2}, /* o */

    [0x19] = {2,3}, /* p */

    [0x10] = {2,4}, /* q */

    [0x13] = {2,5}, /* r */

    [0x1f] = {3,0}, /* s */

    [0x14] = {3,1}, /* t */

    [0x16] = {3,2}, /* u */

    [0x2f] = {3,3}, /* v */

    [0x11] = {3,4}, /* w */

    [0x2d] = {3,5}, /* x */

    [0x15] = {4,2}, /* y */

    [0x2c] = {4,3}, /* z */

    [0xc7] = {5,0}, /* Home */

    [0x2a] = {5,1}, /* shift */

    [0x39] = {5,2}, /* space */

    [0x39] = {5,3}, /* space */

    [0x1c] = {5,5}, /*  enter */

    [0xc8] = {6,0}, /* up */

    [0xd0] = {6,1}, /* down */

    [0xcb] = {6,2}, /* left */

    [0xcd] = {6,3}, /* right */

};

enum mainstone_model_e { mainstone };

#define MAINSTONE_RAM        0x04000000

#define MAINSTONE_ROM        0x00800000

#define MAINSTONE_FLASH        0x02000000

static struct arm_boot_info mainstone_binfo = {

    .loader_start = PXA2XX_SDRAM_BASE,

    .ram_size = 0x04000000,

};

static void mainstone_common_init(ram_addr_t ram_size, int vga_ram_size,

                DisplayState *ds, const char *kernel_filename,

                const char *kernel_cmdline, const char *initrd_filename,

                const char *cpu_model, enum mainstone_model_e model, int arm_id)

{

    uint32_t sector_len = 256 * 1024;

    target_phys_addr_t mainstone_flash_base[] = { MST_FLASH_0, MST_FLASH_1 };

    struct pxa2xx_state_s *cpu;

    qemu_irq *mst_irq;

    int i, index;

    if (!cpu_model)

        cpu_model = "pxa270-c5";

    /* Setup CPU & memory */

    if (ram_size < MAINSTONE_RAM + MAINSTONE_ROM + 2 * MAINSTONE_FLASH +

                    PXA2XX_INTERNAL_SIZE) {

        fprintf(stderr, "This platform requires %i bytes of memory\n",

                        MAINSTONE_RAM + MAINSTONE_ROM + 2 * MAINSTONE_FLASH +

                        PXA2XX_INTERNAL_SIZE);

        exit(1);

    }

    cpu = pxa270_init(mainstone_binfo.ram_size, ds, cpu_model);

    cpu_register_physical_memory(0, MAINSTONE_ROM,

                    qemu_ram_alloc(MAINSTONE_ROM) | IO_MEM_ROM);

    /* Setup initial (reset) machine state */

    cpu->env->regs[15] = mainstone_binfo.loader_start;

    /* There are two 32MiB flash devices on the board */

    for (i = 0; i < 2; i ++) {

        index = drive_get_index(IF_PFLASH, 0, i);

        if (index == -1) {

            fprintf(stderr, "Two flash images must be given with the "

                    "'pflash' parameter\n");

            exit(1);

        }

        if (!pflash_cfi01_register(mainstone_flash_base[i],

                                qemu_ram_alloc(MAINSTONE_FLASH),

                                drives_table[index].bdrv, sector_len,

                                MAINSTONE_FLASH / sector_len, 4, 0, 0, 0, 0)) {

            fprintf(stderr, "qemu: Error registering flash memory.\n");

            exit(1);

        }

    }

    mst_irq = mst_irq_init(cpu, MST_FPGA_PHYS, PXA2XX_PIC_GPIO_0);

    /* setup keypad */

    printf("map addr %p\n", &map);

    pxa27x_register_keypad(cpu->kp, map, 0xe0);

    /* MMC/SD host */

    pxa2xx_mmci_handlers(cpu->mmc, NULL, mst_irq[MMC_IRQ]);

    smc91c111_init(&nd_table[0], MST_ETH_PHYS, mst_irq[ETHERNET_IRQ]);

    mainstone_binfo.kernel_filename = kernel_filename;

    mainstone_binfo.kernel_cmdline = kernel_cmdline;

    mainstone_binfo.initrd_filename = initrd_filename;

    mainstone_binfo.board_id = arm_id;

    arm_load_kernel(cpu->env, &mainstone_binfo);

}

static void mainstone_init(ram_addr_t ram_size, int vga_ram_size,

                const char *boot_device, DisplayState *ds,

                const char *kernel_filename, const char *kernel_cmdline,

                const char *initrd_filename, const char *cpu_model)

{

    mainstone_common_init(ram_size, vga_ram_size, ds, kernel_filename,

                kernel_cmdline, initrd_filename, cpu_model, mainstone, 0x196);

}

QEMUMachine mainstone2_machine = {

    "mainstone",

    "Mainstone II (PXA27x)",

    mainstone_init,

    (MAINSTONE_RAM + MAINSTONE_ROM + 2 * MAINSTONE_FLASH +

     PXA2XX_INTERNAL_SIZE) | RAMSIZE_FIXED,

};