root / hw / omap_i2c.c @ 0abaa7c1
History | View | Annotate | Download (13 kB)
1 |
/*
|
---|---|
2 |
* TI OMAP on-chip I2C controller. Only "new I2C" mode supported.
|
3 |
*
|
4 |
* Copyright (C) 2007 Andrzej Zaborowski <balrog@zabor.org>
|
5 |
*
|
6 |
* This program is free software; you can redistribute it and/or
|
7 |
* modify it under the terms of the GNU General Public License as
|
8 |
* published by the Free Software Foundation; either version 2 of
|
9 |
* the License, or (at your option) any later version.
|
10 |
*
|
11 |
* This program is distributed in the hope that it will be useful,
|
12 |
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
13 |
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
14 |
* GNU General Public License for more details.
|
15 |
*
|
16 |
* You should have received a copy of the GNU General Public License along
|
17 |
* with this program; if not, see <http://www.gnu.org/licenses/>.
|
18 |
*/
|
19 |
#include "hw.h" |
20 |
#include "i2c.h" |
21 |
#include "omap.h" |
22 |
|
23 |
struct omap_i2c_s {
|
24 |
qemu_irq irq; |
25 |
qemu_irq drq[2];
|
26 |
i2c_bus *bus; |
27 |
|
28 |
uint8_t revision; |
29 |
uint8_t mask; |
30 |
uint16_t stat; |
31 |
uint16_t dma; |
32 |
uint16_t count; |
33 |
int count_cur;
|
34 |
uint32_t fifo; |
35 |
int rxlen;
|
36 |
int txlen;
|
37 |
uint16_t control; |
38 |
uint16_t addr[2];
|
39 |
uint8_t divider; |
40 |
uint8_t times[2];
|
41 |
uint16_t test; |
42 |
}; |
43 |
|
44 |
#define OMAP2_INTR_REV 0x34 |
45 |
#define OMAP2_GC_REV 0x34 |
46 |
|
47 |
static void omap_i2c_interrupts_update(struct omap_i2c_s *s) |
48 |
{ |
49 |
qemu_set_irq(s->irq, s->stat & s->mask); |
50 |
if ((s->dma >> 15) & 1) /* RDMA_EN */ |
51 |
qemu_set_irq(s->drq[0], (s->stat >> 3) & 1); /* RRDY */ |
52 |
if ((s->dma >> 7) & 1) /* XDMA_EN */ |
53 |
qemu_set_irq(s->drq[1], (s->stat >> 4) & 1); /* XRDY */ |
54 |
} |
55 |
|
56 |
static void omap_i2c_fifo_run(struct omap_i2c_s *s) |
57 |
{ |
58 |
int ack = 1; |
59 |
|
60 |
if (!i2c_bus_busy(s->bus))
|
61 |
return;
|
62 |
|
63 |
if ((s->control >> 2) & 1) { /* RM */ |
64 |
if ((s->control >> 1) & 1) { /* STP */ |
65 |
i2c_end_transfer(s->bus); |
66 |
s->control &= ~(1 << 1); /* STP */ |
67 |
s->count_cur = s->count; |
68 |
s->txlen = 0;
|
69 |
} else if ((s->control >> 9) & 1) { /* TRX */ |
70 |
while (ack && s->txlen)
|
71 |
ack = (i2c_send(s->bus, |
72 |
(s->fifo >> ((-- s->txlen) << 3)) &
|
73 |
0xff) >= 0); |
74 |
s->stat |= 1 << 4; /* XRDY */ |
75 |
} else {
|
76 |
while (s->rxlen < 4) |
77 |
s->fifo |= i2c_recv(s->bus) << ((s->rxlen ++) << 3);
|
78 |
s->stat |= 1 << 3; /* RRDY */ |
79 |
} |
80 |
} else {
|
81 |
if ((s->control >> 9) & 1) { /* TRX */ |
82 |
while (ack && s->count_cur && s->txlen) {
|
83 |
ack = (i2c_send(s->bus, |
84 |
(s->fifo >> ((-- s->txlen) << 3)) &
|
85 |
0xff) >= 0); |
86 |
s->count_cur --; |
87 |
} |
88 |
if (ack && s->count_cur)
|
89 |
s->stat |= 1 << 4; /* XRDY */ |
90 |
else
|
91 |
s->stat &= ~(1 << 4); /* XRDY */ |
92 |
if (!s->count_cur) {
|
93 |
s->stat |= 1 << 2; /* ARDY */ |
94 |
s->control &= ~(1 << 10); /* MST */ |
95 |
} |
96 |
} else {
|
97 |
while (s->count_cur && s->rxlen < 4) { |
98 |
s->fifo |= i2c_recv(s->bus) << ((s->rxlen ++) << 3);
|
99 |
s->count_cur --; |
100 |
} |
101 |
if (s->rxlen)
|
102 |
s->stat |= 1 << 3; /* RRDY */ |
103 |
else
|
104 |
s->stat &= ~(1 << 3); /* RRDY */ |
105 |
} |
106 |
if (!s->count_cur) {
|
107 |
if ((s->control >> 1) & 1) { /* STP */ |
108 |
i2c_end_transfer(s->bus); |
109 |
s->control &= ~(1 << 1); /* STP */ |
110 |
s->count_cur = s->count; |
111 |
s->txlen = 0;
|
112 |
} else {
|
113 |
s->stat |= 1 << 2; /* ARDY */ |
114 |
s->control &= ~(1 << 10); /* MST */ |
115 |
} |
116 |
} |
117 |
} |
118 |
|
119 |
s->stat |= (!ack) << 1; /* NACK */ |
120 |
if (!ack)
|
121 |
s->control &= ~(1 << 1); /* STP */ |
122 |
} |
123 |
|
124 |
void omap_i2c_reset(struct omap_i2c_s *s) |
125 |
{ |
126 |
s->mask = 0;
|
127 |
s->stat = 0;
|
128 |
s->dma = 0;
|
129 |
s->count = 0;
|
130 |
s->count_cur = 0;
|
131 |
s->fifo = 0;
|
132 |
s->rxlen = 0;
|
133 |
s->txlen = 0;
|
134 |
s->control = 0;
|
135 |
s->addr[0] = 0; |
136 |
s->addr[1] = 0; |
137 |
s->divider = 0;
|
138 |
s->times[0] = 0; |
139 |
s->times[1] = 0; |
140 |
s->test = 0;
|
141 |
} |
142 |
|
143 |
static uint32_t omap_i2c_read(void *opaque, target_phys_addr_t addr) |
144 |
{ |
145 |
struct omap_i2c_s *s = (struct omap_i2c_s *) opaque; |
146 |
int offset = addr & OMAP_MPUI_REG_MASK;
|
147 |
uint16_t ret; |
148 |
|
149 |
switch (offset) {
|
150 |
case 0x00: /* I2C_REV */ |
151 |
return s->revision; /* REV */ |
152 |
|
153 |
case 0x04: /* I2C_IE */ |
154 |
return s->mask;
|
155 |
|
156 |
case 0x08: /* I2C_STAT */ |
157 |
return s->stat | (i2c_bus_busy(s->bus) << 12); |
158 |
|
159 |
case 0x0c: /* I2C_IV */ |
160 |
if (s->revision >= OMAP2_INTR_REV)
|
161 |
break;
|
162 |
ret = ffs(s->stat & s->mask); |
163 |
if (ret)
|
164 |
s->stat ^= 1 << (ret - 1); |
165 |
omap_i2c_interrupts_update(s); |
166 |
return ret;
|
167 |
|
168 |
case 0x10: /* I2C_SYSS */ |
169 |
return (s->control >> 15) & 1; /* I2C_EN */ |
170 |
|
171 |
case 0x14: /* I2C_BUF */ |
172 |
return s->dma;
|
173 |
|
174 |
case 0x18: /* I2C_CNT */ |
175 |
return s->count_cur; /* DCOUNT */ |
176 |
|
177 |
case 0x1c: /* I2C_DATA */ |
178 |
ret = 0;
|
179 |
if (s->control & (1 << 14)) { /* BE */ |
180 |
ret |= ((s->fifo >> 0) & 0xff) << 8; |
181 |
ret |= ((s->fifo >> 8) & 0xff) << 0; |
182 |
} else {
|
183 |
ret |= ((s->fifo >> 8) & 0xff) << 8; |
184 |
ret |= ((s->fifo >> 0) & 0xff) << 0; |
185 |
} |
186 |
if (s->rxlen == 1) { |
187 |
s->stat |= 1 << 15; /* SBD */ |
188 |
s->rxlen = 0;
|
189 |
} else if (s->rxlen > 1) { |
190 |
if (s->rxlen > 2) |
191 |
s->fifo >>= 16;
|
192 |
s->rxlen -= 2;
|
193 |
} else
|
194 |
/* XXX: remote access (qualifier) error - what's that? */;
|
195 |
if (!s->rxlen) {
|
196 |
s->stat &= ~(1 << 3); /* RRDY */ |
197 |
if (((s->control >> 10) & 1) && /* MST */ |
198 |
((~s->control >> 9) & 1)) { /* TRX */ |
199 |
s->stat |= 1 << 2; /* ARDY */ |
200 |
s->control &= ~(1 << 10); /* MST */ |
201 |
} |
202 |
} |
203 |
s->stat &= ~(1 << 11); /* ROVR */ |
204 |
omap_i2c_fifo_run(s); |
205 |
omap_i2c_interrupts_update(s); |
206 |
return ret;
|
207 |
|
208 |
case 0x20: /* I2C_SYSC */ |
209 |
return 0; |
210 |
|
211 |
case 0x24: /* I2C_CON */ |
212 |
return s->control;
|
213 |
|
214 |
case 0x28: /* I2C_OA */ |
215 |
return s->addr[0]; |
216 |
|
217 |
case 0x2c: /* I2C_SA */ |
218 |
return s->addr[1]; |
219 |
|
220 |
case 0x30: /* I2C_PSC */ |
221 |
return s->divider;
|
222 |
|
223 |
case 0x34: /* I2C_SCLL */ |
224 |
return s->times[0]; |
225 |
|
226 |
case 0x38: /* I2C_SCLH */ |
227 |
return s->times[1]; |
228 |
|
229 |
case 0x3c: /* I2C_SYSTEST */ |
230 |
if (s->test & (1 << 15)) { /* ST_EN */ |
231 |
s->test ^= 0xa;
|
232 |
return s->test;
|
233 |
} else
|
234 |
return s->test & ~0x300f; |
235 |
} |
236 |
|
237 |
OMAP_BAD_REG(addr); |
238 |
return 0; |
239 |
} |
240 |
|
241 |
static void omap_i2c_write(void *opaque, target_phys_addr_t addr, |
242 |
uint32_t value) |
243 |
{ |
244 |
struct omap_i2c_s *s = (struct omap_i2c_s *) opaque; |
245 |
int offset = addr & OMAP_MPUI_REG_MASK;
|
246 |
int nack;
|
247 |
|
248 |
switch (offset) {
|
249 |
case 0x00: /* I2C_REV */ |
250 |
case 0x0c: /* I2C_IV */ |
251 |
case 0x10: /* I2C_SYSS */ |
252 |
OMAP_RO_REG(addr); |
253 |
return;
|
254 |
|
255 |
case 0x04: /* I2C_IE */ |
256 |
s->mask = value & (s->revision < OMAP2_GC_REV ? 0x1f : 0x3f); |
257 |
break;
|
258 |
|
259 |
case 0x08: /* I2C_STAT */ |
260 |
if (s->revision < OMAP2_INTR_REV) {
|
261 |
OMAP_RO_REG(addr); |
262 |
return;
|
263 |
} |
264 |
|
265 |
/* RRDY and XRDY are reset by hardware. (in all versions???) */
|
266 |
s->stat &= ~(value & 0x27);
|
267 |
omap_i2c_interrupts_update(s); |
268 |
break;
|
269 |
|
270 |
case 0x14: /* I2C_BUF */ |
271 |
s->dma = value & 0x8080;
|
272 |
if (value & (1 << 15)) /* RDMA_EN */ |
273 |
s->mask &= ~(1 << 3); /* RRDY_IE */ |
274 |
if (value & (1 << 7)) /* XDMA_EN */ |
275 |
s->mask &= ~(1 << 4); /* XRDY_IE */ |
276 |
break;
|
277 |
|
278 |
case 0x18: /* I2C_CNT */ |
279 |
s->count = value; /* DCOUNT */
|
280 |
break;
|
281 |
|
282 |
case 0x1c: /* I2C_DATA */ |
283 |
if (s->txlen > 2) { |
284 |
/* XXX: remote access (qualifier) error - what's that? */
|
285 |
break;
|
286 |
} |
287 |
s->fifo <<= 16;
|
288 |
s->txlen += 2;
|
289 |
if (s->control & (1 << 14)) { /* BE */ |
290 |
s->fifo |= ((value >> 8) & 0xff) << 8; |
291 |
s->fifo |= ((value >> 0) & 0xff) << 0; |
292 |
} else {
|
293 |
s->fifo |= ((value >> 0) & 0xff) << 8; |
294 |
s->fifo |= ((value >> 8) & 0xff) << 0; |
295 |
} |
296 |
s->stat &= ~(1 << 10); /* XUDF */ |
297 |
if (s->txlen > 2) |
298 |
s->stat &= ~(1 << 4); /* XRDY */ |
299 |
omap_i2c_fifo_run(s); |
300 |
omap_i2c_interrupts_update(s); |
301 |
break;
|
302 |
|
303 |
case 0x20: /* I2C_SYSC */ |
304 |
if (s->revision < OMAP2_INTR_REV) {
|
305 |
OMAP_BAD_REG(addr); |
306 |
return;
|
307 |
} |
308 |
|
309 |
if (value & 2) |
310 |
omap_i2c_reset(s); |
311 |
break;
|
312 |
|
313 |
case 0x24: /* I2C_CON */ |
314 |
s->control = value & 0xcf87;
|
315 |
if (~value & (1 << 15)) { /* I2C_EN */ |
316 |
if (s->revision < OMAP2_INTR_REV)
|
317 |
omap_i2c_reset(s); |
318 |
break;
|
319 |
} |
320 |
if ((value & (1 << 15)) && !(value & (1 << 10))) { /* MST */ |
321 |
fprintf(stderr, "%s: I^2C slave mode not supported\n",
|
322 |
__FUNCTION__); |
323 |
break;
|
324 |
} |
325 |
if ((value & (1 << 15)) && value & (1 << 8)) { /* XA */ |
326 |
fprintf(stderr, "%s: 10-bit addressing mode not supported\n",
|
327 |
__FUNCTION__); |
328 |
break;
|
329 |
} |
330 |
if ((value & (1 << 15)) && value & (1 << 0)) { /* STT */ |
331 |
nack = !!i2c_start_transfer(s->bus, s->addr[1], /* SA */ |
332 |
(~value >> 9) & 1); /* TRX */ |
333 |
s->stat |= nack << 1; /* NACK */ |
334 |
s->control &= ~(1 << 0); /* STT */ |
335 |
s->fifo = 0;
|
336 |
if (nack)
|
337 |
s->control &= ~(1 << 1); /* STP */ |
338 |
else {
|
339 |
s->count_cur = s->count; |
340 |
omap_i2c_fifo_run(s); |
341 |
} |
342 |
omap_i2c_interrupts_update(s); |
343 |
} |
344 |
break;
|
345 |
|
346 |
case 0x28: /* I2C_OA */ |
347 |
s->addr[0] = value & 0x3ff; |
348 |
break;
|
349 |
|
350 |
case 0x2c: /* I2C_SA */ |
351 |
s->addr[1] = value & 0x3ff; |
352 |
break;
|
353 |
|
354 |
case 0x30: /* I2C_PSC */ |
355 |
s->divider = value; |
356 |
break;
|
357 |
|
358 |
case 0x34: /* I2C_SCLL */ |
359 |
s->times[0] = value;
|
360 |
break;
|
361 |
|
362 |
case 0x38: /* I2C_SCLH */ |
363 |
s->times[1] = value;
|
364 |
break;
|
365 |
|
366 |
case 0x3c: /* I2C_SYSTEST */ |
367 |
s->test = value & 0xf80f;
|
368 |
if (value & (1 << 11)) /* SBB */ |
369 |
if (s->revision >= OMAP2_INTR_REV) {
|
370 |
s->stat |= 0x3f;
|
371 |
omap_i2c_interrupts_update(s); |
372 |
} |
373 |
if (value & (1 << 15)) /* ST_EN */ |
374 |
fprintf(stderr, "%s: System Test not supported\n", __FUNCTION__);
|
375 |
break;
|
376 |
|
377 |
default:
|
378 |
OMAP_BAD_REG(addr); |
379 |
return;
|
380 |
} |
381 |
} |
382 |
|
383 |
static void omap_i2c_writeb(void *opaque, target_phys_addr_t addr, |
384 |
uint32_t value) |
385 |
{ |
386 |
struct omap_i2c_s *s = (struct omap_i2c_s *) opaque; |
387 |
int offset = addr & OMAP_MPUI_REG_MASK;
|
388 |
|
389 |
switch (offset) {
|
390 |
case 0x1c: /* I2C_DATA */ |
391 |
if (s->txlen > 2) { |
392 |
/* XXX: remote access (qualifier) error - what's that? */
|
393 |
break;
|
394 |
} |
395 |
s->fifo <<= 8;
|
396 |
s->txlen += 1;
|
397 |
s->fifo |= value & 0xff;
|
398 |
s->stat &= ~(1 << 10); /* XUDF */ |
399 |
if (s->txlen > 2) |
400 |
s->stat &= ~(1 << 4); /* XRDY */ |
401 |
omap_i2c_fifo_run(s); |
402 |
omap_i2c_interrupts_update(s); |
403 |
break;
|
404 |
|
405 |
default:
|
406 |
OMAP_BAD_REG(addr); |
407 |
return;
|
408 |
} |
409 |
} |
410 |
|
411 |
static CPUReadMemoryFunc * const omap_i2c_readfn[] = { |
412 |
omap_badwidth_read16, |
413 |
omap_i2c_read, |
414 |
omap_badwidth_read16, |
415 |
}; |
416 |
|
417 |
static CPUWriteMemoryFunc * const omap_i2c_writefn[] = { |
418 |
omap_i2c_writeb, /* Only the last fifo write can be 8 bit. */
|
419 |
omap_i2c_write, |
420 |
omap_badwidth_write16, |
421 |
}; |
422 |
|
423 |
struct omap_i2c_s *omap_i2c_init(target_phys_addr_t base,
|
424 |
qemu_irq irq, qemu_irq *dma, omap_clk clk) |
425 |
{ |
426 |
int iomemtype;
|
427 |
struct omap_i2c_s *s = (struct omap_i2c_s *) |
428 |
qemu_mallocz(sizeof(struct omap_i2c_s)); |
429 |
|
430 |
/* TODO: set a value greater or equal to real hardware */
|
431 |
s->revision = 0x11;
|
432 |
s->irq = irq; |
433 |
s->drq[0] = dma[0]; |
434 |
s->drq[1] = dma[1]; |
435 |
s->bus = i2c_init_bus(NULL, "i2c"); |
436 |
omap_i2c_reset(s); |
437 |
|
438 |
iomemtype = cpu_register_io_memory(omap_i2c_readfn, |
439 |
omap_i2c_writefn, s); |
440 |
cpu_register_physical_memory(base, 0x800, iomemtype);
|
441 |
|
442 |
return s;
|
443 |
} |
444 |
|
445 |
struct omap_i2c_s *omap2_i2c_init(struct omap_target_agent_s *ta, |
446 |
qemu_irq irq, qemu_irq *dma, omap_clk fclk, omap_clk iclk) |
447 |
{ |
448 |
int iomemtype;
|
449 |
struct omap_i2c_s *s = (struct omap_i2c_s *) |
450 |
qemu_mallocz(sizeof(struct omap_i2c_s)); |
451 |
|
452 |
s->revision = 0x34;
|
453 |
s->irq = irq; |
454 |
s->drq[0] = dma[0]; |
455 |
s->drq[1] = dma[1]; |
456 |
s->bus = i2c_init_bus(NULL, "i2c"); |
457 |
omap_i2c_reset(s); |
458 |
|
459 |
iomemtype = l4_register_io_memory(omap_i2c_readfn, |
460 |
omap_i2c_writefn, s); |
461 |
omap_l4_attach(ta, 0, iomemtype);
|
462 |
|
463 |
return s;
|
464 |
} |
465 |
|
466 |
i2c_bus *omap_i2c_bus(struct omap_i2c_s *s)
|
467 |
{ |
468 |
return s->bus;
|
469 |
} |