Archipelago » qemu

/*

 * QEMU JAZZ RC4030 chipset

 *

 * Copyright (c) 2007-2009 Herve Poussineau

 *

 * Permission is hereby granted, free of charge, to any person obtaining a copy

 * of this software and associated documentation files (the "Software"), to deal

 * in the Software without restriction, including without limitation the rights

 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell

 * copies of the Software, and to permit persons to whom the Software is

 * furnished to do so, subject to the following conditions:

 *

 * The above copyright notice and this permission notice shall be included in

 * all copies or substantial portions of the Software.

 *

 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR

 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,

 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL

 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER

 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,

 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN

 * THE SOFTWARE.

 */

#include "hw.h"

#include "mips.h"

#include "qemu/timer.h"

/********************************************************/

/* debug rc4030 */

//#define DEBUG_RC4030

//#define DEBUG_RC4030_DMA

#ifdef DEBUG_RC4030

#define DPRINTF(fmt, ...) \

do { printf("rc4030: " fmt , ## __VA_ARGS__); } while (0)

static const char* irq_names[] = { "parallel", "floppy", "sound", "video",

            "network", "scsi", "keyboard", "mouse", "serial0", "serial1" };

#else

#define DPRINTF(fmt, ...)

#endif

#define RC4030_ERROR(fmt, ...) \

do { fprintf(stderr, "rc4030 ERROR: %s: " fmt, __func__ , ## __VA_ARGS__); } while (0)

/********************************************************/

/* rc4030 emulation                                     */

typedef struct dma_pagetable_entry {

    int32_t frame;

    int32_t owner;

} QEMU_PACKED dma_pagetable_entry;

#define DMA_PAGESIZE    4096

#define DMA_REG_ENABLE  1

#define DMA_REG_COUNT   2

#define DMA_REG_ADDRESS 3

#define DMA_FLAG_ENABLE     0x0001

#define DMA_FLAG_MEM_TO_DEV 0x0002

#define DMA_FLAG_TC_INTR    0x0100

#define DMA_FLAG_MEM_INTR   0x0200

#define DMA_FLAG_ADDR_INTR  0x0400

typedef struct rc4030State

{

    uint32_t config; /* 0x0000: RC4030 config register */

    uint32_t revision; /* 0x0008: RC4030 Revision register */

    uint32_t invalid_address_register; /* 0x0010: Invalid Address register */

    /* DMA */

    uint32_t dma_regs[8][4];

    uint32_t dma_tl_base; /* 0x0018: DMA transl. table base */

    uint32_t dma_tl_limit; /* 0x0020: DMA transl. table limit */

    /* cache */

    uint32_t cache_maint; /* 0x0030: Cache Maintenance */

    uint32_t remote_failed_address; /* 0x0038: Remote Failed Address */

    uint32_t memory_failed_address; /* 0x0040: Memory Failed Address */

    uint32_t cache_ptag; /* 0x0048: I/O Cache Physical Tag */

    uint32_t cache_ltag; /* 0x0050: I/O Cache Logical Tag */

    uint32_t cache_bmask; /* 0x0058: I/O Cache Byte Mask */

    uint32_t nmi_interrupt; /* 0x0200: interrupt source */

    uint32_t offset210;

    uint32_t nvram_protect; /* 0x0220: NV ram protect register */

    uint32_t rem_speed[16];

    uint32_t imr_jazz; /* Local bus int enable mask */

    uint32_t isr_jazz; /* Local bus int source */

    /* timer */

    QEMUTimer *periodic_timer;

    uint32_t itr; /* Interval timer reload */

    qemu_irq timer_irq;

    qemu_irq jazz_bus_irq;

    MemoryRegion iomem_chipset;

    MemoryRegion iomem_jazzio;

} rc4030State;

static void set_next_tick(rc4030State *s)

{

    qemu_irq_lower(s->timer_irq);

    uint32_t tm_hz;

    tm_hz = 1000 / (s->itr + 1);

    qemu_mod_timer(s->periodic_timer, qemu_get_clock_ns(vm_clock) +

                   get_ticks_per_sec() / tm_hz);

}

/* called for accesses to rc4030 */

static uint32_t rc4030_readl(void *opaque, hwaddr addr)

{

    rc4030State *s = opaque;

    uint32_t val;

    addr &= 0x3fff;

    switch (addr & ~0x3) {

    /* Global config register */

    case 0x0000:

        val = s->config;

        break;

    /* Revision register */

    case 0x0008:

        val = s->revision;

        break;

    /* Invalid Address register */

    case 0x0010:

        val = s->invalid_address_register;

        break;

    /* DMA transl. table base */

    case 0x0018:

        val = s->dma_tl_base;

        break;

    /* DMA transl. table limit */

    case 0x0020:

        val = s->dma_tl_limit;

        break;

    /* Remote Failed Address */

    case 0x0038:

        val = s->remote_failed_address;

        break;

    /* Memory Failed Address */

    case 0x0040:

        val = s->memory_failed_address;

        break;

    /* I/O Cache Byte Mask */

    case 0x0058:

        val = s->cache_bmask;

        /* HACK */

        if (s->cache_bmask == (uint32_t)-1)

            s->cache_bmask = 0;

        break;

    /* Remote Speed Registers */

    case 0x0070:

    case 0x0078:

    case 0x0080:

    case 0x0088:

    case 0x0090:

    case 0x0098:

    case 0x00a0:

    case 0x00a8:

    case 0x00b0:

    case 0x00b8:

    case 0x00c0:

    case 0x00c8:

    case 0x00d0:

    case 0x00d8:

    case 0x00e0:

    case 0x00e8:

        val = s->rem_speed[(addr - 0x0070) >> 3];

        break;

    /* DMA channel base address */

    case 0x0100:

    case 0x0108:

    case 0x0110:

    case 0x0118:

    case 0x0120:

    case 0x0128:

    case 0x0130:

    case 0x0138:

    case 0x0140:

    case 0x0148:

    case 0x0150:

    case 0x0158:

    case 0x0160:

    case 0x0168:

    case 0x0170:

    case 0x0178:

    case 0x0180:

    case 0x0188:

    case 0x0190:

    case 0x0198:

    case 0x01a0:

    case 0x01a8:

    case 0x01b0:

    case 0x01b8:

    case 0x01c0:

    case 0x01c8:

    case 0x01d0:

    case 0x01d8:

    case 0x01e0:

    case 0x01e8:

    case 0x01f0:

    case 0x01f8:

        {

            int entry = (addr - 0x0100) >> 5;

            int idx = (addr & 0x1f) >> 3;

            val = s->dma_regs[entry][idx];

        }

        break;

    /* Interrupt source */

    case 0x0200:

        val = s->nmi_interrupt;

        break;

    /* Error type */

    case 0x0208:

        val = 0;

        break;

    /* Offset 0x0210 */

    case 0x0210:

        val = s->offset210;

        break;

    /* NV ram protect register */

    case 0x0220:

        val = s->nvram_protect;

        break;

    /* Interval timer count */

    case 0x0230:

        val = 0;

        qemu_irq_lower(s->timer_irq);

        break;

    /* EISA interrupt */

    case 0x0238:

        val = 7; /* FIXME: should be read from EISA controller */

        break;

    default:

        RC4030_ERROR("invalid read [" TARGET_FMT_plx "]\n", addr);

        val = 0;

        break;

    }

    if ((addr & ~3) != 0x230) {

        DPRINTF("read 0x%02x at " TARGET_FMT_plx "\n", val, addr);

    }

    return val;

}

static uint32_t rc4030_readw(void *opaque, hwaddr addr)

{

    uint32_t v = rc4030_readl(opaque, addr & ~0x3);

    if (addr & 0x2)

        return v >> 16;

    else

        return v & 0xffff;

}

static uint32_t rc4030_readb(void *opaque, hwaddr addr)

{

    uint32_t v = rc4030_readl(opaque, addr & ~0x3);

    return (v >> (8 * (addr & 0x3))) & 0xff;

}

static void rc4030_writel(void *opaque, hwaddr addr, uint32_t val)

{

    rc4030State *s = opaque;

    addr &= 0x3fff;

    DPRINTF("write 0x%02x at " TARGET_FMT_plx "\n", val, addr);

    switch (addr & ~0x3) {

    /* Global config register */

    case 0x0000:

        s->config = val;

        break;

    /* DMA transl. table base */

    case 0x0018:

        s->dma_tl_base = val;

        break;

    /* DMA transl. table limit */

    case 0x0020:

        s->dma_tl_limit = val;

        break;

    /* DMA transl. table invalidated */

    case 0x0028:

        break;

    /* Cache Maintenance */

    case 0x0030:

        s->cache_maint = val;

        break;

    /* I/O Cache Physical Tag */

    case 0x0048:

        s->cache_ptag = val;

        break;

    /* I/O Cache Logical Tag */

    case 0x0050:

        s->cache_ltag = val;

        break;

    /* I/O Cache Byte Mask */

    case 0x0058:

        s->cache_bmask |= val; /* HACK */

        break;

    /* I/O Cache Buffer Window */

    case 0x0060:

        /* HACK */

        if (s->cache_ltag == 0x80000001 && s->cache_bmask == 0xf0f0f0f) {

            hwaddr dest = s->cache_ptag & ~0x1;

            dest += (s->cache_maint & 0x3) << 3;

            cpu_physical_memory_write(dest, &val, 4);

        }

        break;

    /* Remote Speed Registers */

    case 0x0070:

    case 0x0078:

    case 0x0080:

    case 0x0088:

    case 0x0090:

    case 0x0098:

    case 0x00a0:

    case 0x00a8:

    case 0x00b0:

    case 0x00b8:

    case 0x00c0:

    case 0x00c8:

    case 0x00d0:

    case 0x00d8:

    case 0x00e0:

    case 0x00e8:

        s->rem_speed[(addr - 0x0070) >> 3] = val;

        break;

    /* DMA channel base address */

    case 0x0100:

    case 0x0108:

    case 0x0110:

    case 0x0118:

    case 0x0120:

    case 0x0128:

    case 0x0130:

    case 0x0138:

    case 0x0140:

    case 0x0148:

    case 0x0150:

    case 0x0158:

    case 0x0160:

    case 0x0168:

    case 0x0170:

    case 0x0178:

    case 0x0180:

    case 0x0188:

    case 0x0190:

    case 0x0198:

    case 0x01a0:

    case 0x01a8:

    case 0x01b0:

    case 0x01b8:

    case 0x01c0:

    case 0x01c8:

    case 0x01d0:

    case 0x01d8:

    case 0x01e0:

    case 0x01e8:

    case 0x01f0:

    case 0x01f8:

        {

            int entry = (addr - 0x0100) >> 5;

            int idx = (addr & 0x1f) >> 3;

            s->dma_regs[entry][idx] = val;

        }

        break;

    /* Offset 0x0210 */

    case 0x0210:

        s->offset210 = val;

        break;

    /* Interval timer reload */

    case 0x0228:

        s->itr = val;

        qemu_irq_lower(s->timer_irq);

        set_next_tick(s);

        break;

    /* EISA interrupt */

    case 0x0238:

        break;

    default:

        RC4030_ERROR("invalid write of 0x%02x at [" TARGET_FMT_plx "]\n", val, addr);

        break;

    }

}

static void rc4030_writew(void *opaque, hwaddr addr, uint32_t val)

{

    uint32_t old_val = rc4030_readl(opaque, addr & ~0x3);

    if (addr & 0x2)

        val = (val << 16) | (old_val & 0x0000ffff);

    else

        val = val | (old_val & 0xffff0000);

    rc4030_writel(opaque, addr & ~0x3, val);

}

static void rc4030_writeb(void *opaque, hwaddr addr, uint32_t val)

{

    uint32_t old_val = rc4030_readl(opaque, addr & ~0x3);

    switch (addr & 3) {

    case 0:

        val = val | (old_val & 0xffffff00);

        break;

    case 1:

        val = (val << 8) | (old_val & 0xffff00ff);

        break;

    case 2:

        val = (val << 16) | (old_val & 0xff00ffff);

        break;

    case 3:

        val = (val << 24) | (old_val & 0x00ffffff);

        break;

    }

    rc4030_writel(opaque, addr & ~0x3, val);

}

static const MemoryRegionOps rc4030_ops = {

    .old_mmio = {

        .read = { rc4030_readb, rc4030_readw, rc4030_readl, },

        .write = { rc4030_writeb, rc4030_writew, rc4030_writel, },

    },

    .endianness = DEVICE_NATIVE_ENDIAN,

};

static void update_jazz_irq(rc4030State *s)

{

    uint16_t pending;

    pending = s->isr_jazz & s->imr_jazz;

#ifdef DEBUG_RC4030

    if (s->isr_jazz != 0) {

        uint32_t irq = 0;

        DPRINTF("pending irqs:");

        for (irq = 0; irq < ARRAY_SIZE(irq_names); irq++) {

            if (s->isr_jazz & (1 << irq)) {

                printf(" %s", irq_names[irq]);

                if (!(s->imr_jazz & (1 << irq))) {

                    printf("(ignored)");

                }

            }

        }

        printf("\n");

    }

#endif

    if (pending != 0)

        qemu_irq_raise(s->jazz_bus_irq);

    else

        qemu_irq_lower(s->jazz_bus_irq);

}

static void rc4030_irq_jazz_request(void *opaque, int irq, int level)

{

    rc4030State *s = opaque;

    if (level) {

        s->isr_jazz |= 1 << irq;

    } else {

        s->isr_jazz &= ~(1 << irq);

    }

    update_jazz_irq(s);

}

static void rc4030_periodic_timer(void *opaque)

{

    rc4030State *s = opaque;

    set_next_tick(s);

    qemu_irq_raise(s->timer_irq);

}

static uint32_t jazzio_readw(void *opaque, hwaddr addr)

{

    rc4030State *s = opaque;

    uint32_t val;

    uint32_t irq;

    addr &= 0xfff;

    switch (addr) {

    /* Local bus int source */

    case 0x00: {

        uint32_t pending = s->isr_jazz & s->imr_jazz;

        val = 0;

        irq = 0;

        while (pending) {

            if (pending & 1) {

                DPRINTF("returning irq %s\n", irq_names[irq]);

                val = (irq + 1) << 2;

                break;

            }

            irq++;

            pending >>= 1;

        }

        break;

    }

    /* Local bus int enable mask */

    case 0x02:

        val = s->imr_jazz;

        break;

    default:

        RC4030_ERROR("(jazz io controller) invalid read [" TARGET_FMT_plx "]\n", addr);

        val = 0;

    }

    DPRINTF("(jazz io controller) read 0x%04x at " TARGET_FMT_plx "\n", val, addr);

    return val;

}

static uint32_t jazzio_readb(void *opaque, hwaddr addr)

{

    uint32_t v;

    v = jazzio_readw(opaque, addr & ~0x1);

    return (v >> (8 * (addr & 0x1))) & 0xff;

}

static uint32_t jazzio_readl(void *opaque, hwaddr addr)

{

    uint32_t v;

    v = jazzio_readw(opaque, addr);

    v |= jazzio_readw(opaque, addr + 2) << 16;

    return v;

}

static void jazzio_writew(void *opaque, hwaddr addr, uint32_t val)

{

    rc4030State *s = opaque;

    addr &= 0xfff;

    DPRINTF("(jazz io controller) write 0x%04x at " TARGET_FMT_plx "\n", val, addr);

    switch (addr) {

    /* Local bus int enable mask */

    case 0x02:

        s->imr_jazz = val;

        update_jazz_irq(s);

        break;

    default:

        RC4030_ERROR("(jazz io controller) invalid write of 0x%04x at [" TARGET_FMT_plx "]\n", val, addr);

        break;

    }

}

static void jazzio_writeb(void *opaque, hwaddr addr, uint32_t val)

{

    uint32_t old_val = jazzio_readw(opaque, addr & ~0x1);

    switch (addr & 1) {

    case 0:

        val = val | (old_val & 0xff00);

        break;

    case 1:

        val = (val << 8) | (old_val & 0x00ff);

        break;

    }

    jazzio_writew(opaque, addr & ~0x1, val);

}

static void jazzio_writel(void *opaque, hwaddr addr, uint32_t val)

{

    jazzio_writew(opaque, addr, val & 0xffff);

    jazzio_writew(opaque, addr + 2, (val >> 16) & 0xffff);

}

static const MemoryRegionOps jazzio_ops = {

    .old_mmio = {

        .read = { jazzio_readb, jazzio_readw, jazzio_readl, },

        .write = { jazzio_writeb, jazzio_writew, jazzio_writel, },

    },

    .endianness = DEVICE_NATIVE_ENDIAN,

};

static void rc4030_reset(void *opaque)

{

    rc4030State *s = opaque;

    int i;

    s->config = 0x410; /* some boards seem to accept 0x104 too */

    s->revision = 1;

    s->invalid_address_register = 0;

    memset(s->dma_regs, 0, sizeof(s->dma_regs));

    s->dma_tl_base = s->dma_tl_limit = 0;

    s->remote_failed_address = s->memory_failed_address = 0;

    s->cache_maint = 0;

    s->cache_ptag = s->cache_ltag = 0;

    s->cache_bmask = 0;

    s->offset210 = 0x18186;

    s->nvram_protect = 7;

    for (i = 0; i < 15; i++)

        s->rem_speed[i] = 7;

    s->imr_jazz = 0x10; /* XXX: required by firmware, but why? */

    s->isr_jazz = 0;

    s->itr = 0;

    qemu_irq_lower(s->timer_irq);

    qemu_irq_lower(s->jazz_bus_irq);

}

static int rc4030_load(QEMUFile *f, void *opaque, int version_id)

{

    rc4030State* s = opaque;

    int i, j;

    if (version_id != 2)

        return -EINVAL;

    s->config = qemu_get_be32(f);

    s->invalid_address_register = qemu_get_be32(f);

    for (i = 0; i < 8; i++)

        for (j = 0; j < 4; j++)

            s->dma_regs[i][j] = qemu_get_be32(f);

    s->dma_tl_base = qemu_get_be32(f);

    s->dma_tl_limit = qemu_get_be32(f);

    s->cache_maint = qemu_get_be32(f);

    s->remote_failed_address = qemu_get_be32(f);

    s->memory_failed_address = qemu_get_be32(f);

    s->cache_ptag = qemu_get_be32(f);

    s->cache_ltag = qemu_get_be32(f);

    s->cache_bmask = qemu_get_be32(f);

    s->offset210 = qemu_get_be32(f);

    s->nvram_protect = qemu_get_be32(f);

    for (i = 0; i < 15; i++)

        s->rem_speed[i] = qemu_get_be32(f);

    s->imr_jazz = qemu_get_be32(f);

    s->isr_jazz = qemu_get_be32(f);

    s->itr = qemu_get_be32(f);

    set_next_tick(s);

    update_jazz_irq(s);

    return 0;

}

static void rc4030_save(QEMUFile *f, void *opaque)

{

    rc4030State* s = opaque;

    int i, j;

    qemu_put_be32(f, s->config);

    qemu_put_be32(f, s->invalid_address_register);

    for (i = 0; i < 8; i++)

        for (j = 0; j < 4; j++)

            qemu_put_be32(f, s->dma_regs[i][j]);

    qemu_put_be32(f, s->dma_tl_base);

    qemu_put_be32(f, s->dma_tl_limit);

    qemu_put_be32(f, s->cache_maint);

    qemu_put_be32(f, s->remote_failed_address);

    qemu_put_be32(f, s->memory_failed_address);

    qemu_put_be32(f, s->cache_ptag);

    qemu_put_be32(f, s->cache_ltag);

    qemu_put_be32(f, s->cache_bmask);

    qemu_put_be32(f, s->offset210);

    qemu_put_be32(f, s->nvram_protect);

    for (i = 0; i < 15; i++)

        qemu_put_be32(f, s->rem_speed[i]);

    qemu_put_be32(f, s->imr_jazz);

    qemu_put_be32(f, s->isr_jazz);

    qemu_put_be32(f, s->itr);

}

void rc4030_dma_memory_rw(void *opaque, hwaddr addr, uint8_t *buf, int len, int is_write)

{

    rc4030State *s = opaque;

    hwaddr entry_addr;

    hwaddr phys_addr;

    dma_pagetable_entry entry;

    int index;

    int ncpy, i;

    i = 0;

    for (;;) {

        if (i == len) {

            break;

        }

        ncpy = DMA_PAGESIZE - (addr & (DMA_PAGESIZE - 1));

        if (ncpy > len - i)

            ncpy = len - i;

        /* Get DMA translation table entry */

        index = addr / DMA_PAGESIZE;

        if (index >= s->dma_tl_limit / sizeof(dma_pagetable_entry)) {

            break;

        }

        entry_addr = s->dma_tl_base + index * sizeof(dma_pagetable_entry);

        /* XXX: not sure. should we really use only lowest bits? */

        entry_addr &= 0x7fffffff;

        cpu_physical_memory_read(entry_addr, &entry, sizeof(entry));

        /* Read/write data at right place */

        phys_addr = entry.frame + (addr & (DMA_PAGESIZE - 1));

        cpu_physical_memory_rw(phys_addr, &buf[i], ncpy, is_write);

        i += ncpy;

        addr += ncpy;

    }

}

static void rc4030_do_dma(void *opaque, int n, uint8_t *buf, int len, int is_write)

{

    rc4030State *s = opaque;

    hwaddr dma_addr;

    int dev_to_mem;

    s->dma_regs[n][DMA_REG_ENABLE] &= ~(DMA_FLAG_TC_INTR | DMA_FLAG_MEM_INTR | DMA_FLAG_ADDR_INTR);

    /* Check DMA channel consistency */

    dev_to_mem = (s->dma_regs[n][DMA_REG_ENABLE] & DMA_FLAG_MEM_TO_DEV) ? 0 : 1;

    if (!(s->dma_regs[n][DMA_REG_ENABLE] & DMA_FLAG_ENABLE) ||

        (is_write != dev_to_mem)) {

        s->dma_regs[n][DMA_REG_ENABLE] |= DMA_FLAG_MEM_INTR;

        s->nmi_interrupt |= 1 << n;

        return;

    }

    /* Get start address and len */

    if (len > s->dma_regs[n][DMA_REG_COUNT])

        len = s->dma_regs[n][DMA_REG_COUNT];

    dma_addr = s->dma_regs[n][DMA_REG_ADDRESS];

    /* Read/write data at right place */

    rc4030_dma_memory_rw(opaque, dma_addr, buf, len, is_write);

    s->dma_regs[n][DMA_REG_ENABLE] |= DMA_FLAG_TC_INTR;

    s->dma_regs[n][DMA_REG_COUNT] -= len;

#ifdef DEBUG_RC4030_DMA

    {

        int i, j;

        printf("rc4030 dma: Copying %d bytes %s host %p\n",

            len, is_write ? "from" : "to", buf);

        for (i = 0; i < len; i += 16) {

            int n = 16;

            if (n > len - i) {

                n = len - i;

            }

            for (j = 0; j < n; j++)

                printf("%02x ", buf[i + j]);

            while (j++ < 16)

                printf("   ");

            printf("| ");

            for (j = 0; j < n; j++)

                printf("%c", isprint(buf[i + j]) ? buf[i + j] : '.');

            printf("\n");

        }

    }

#endif

}

struct rc4030DMAState {

    void *opaque;

    int n;

};

void rc4030_dma_read(void *dma, uint8_t *buf, int len)

{

    rc4030_dma s = dma;

    rc4030_do_dma(s->opaque, s->n, buf, len, 0);

}

void rc4030_dma_write(void *dma, uint8_t *buf, int len)

{

    rc4030_dma s = dma;

    rc4030_do_dma(s->opaque, s->n, buf, len, 1);

}

static rc4030_dma *rc4030_allocate_dmas(void *opaque, int n)

{

    rc4030_dma *s;

    struct rc4030DMAState *p;

    int i;

    s = (rc4030_dma *)g_malloc0(sizeof(rc4030_dma) * n);

    p = (struct rc4030DMAState *)g_malloc0(sizeof(struct rc4030DMAState) * n);

    for (i = 0; i < n; i++) {

        p->opaque = opaque;

        p->n = i;

        s[i] = p;

        p++;

    }

    return s;

}

void *rc4030_init(qemu_irq timer, qemu_irq jazz_bus,

                  qemu_irq **irqs, rc4030_dma **dmas,

                  MemoryRegion *sysmem)

{

    rc4030State *s;

    s = g_malloc0(sizeof(rc4030State));

    *irqs = qemu_allocate_irqs(rc4030_irq_jazz_request, s, 16);

    *dmas = rc4030_allocate_dmas(s, 4);

    s->periodic_timer = qemu_new_timer_ns(vm_clock, rc4030_periodic_timer, s);

    s->timer_irq = timer;

    s->jazz_bus_irq = jazz_bus;

    qemu_register_reset(rc4030_reset, s);

    register_savevm(NULL, "rc4030", 0, 2, rc4030_save, rc4030_load, s);

    rc4030_reset(s);

    memory_region_init_io(&s->iomem_chipset, &rc4030_ops, s,

                          "rc4030.chipset", 0x300);

    memory_region_add_subregion(sysmem, 0x80000000, &s->iomem_chipset);

    memory_region_init_io(&s->iomem_jazzio, &jazzio_ops, s,

                          "rc4030.jazzio", 0x00001000);

    memory_region_add_subregion(sysmem, 0xf0000000, &s->iomem_jazzio);

    return s;

}