Archipelago » qemu

/*

 * QEMU Sparc Sun4m ECC memory controller emulation

 *

 * Copyright (c) 2007 Robert Reif

 *

 * Permission is hereby granted, free of charge, to any person obtaining a copy

 * of this software and associated documentation files (the "Software"), to deal

 * in the Software without restriction, including without limitation the rights

 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell

 * copies of the Software, and to permit persons to whom the Software is

 * furnished to do so, subject to the following conditions:

 *

 * The above copyright notice and this permission notice shall be included in

 * all copies or substantial portions of the Software.

 *

 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR

 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,

 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL

 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER

 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,

 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN

 * THE SOFTWARE.

 */

#include "sun4m.h"

#include "sysbus.h"

//#define DEBUG_ECC

#ifdef DEBUG_ECC

#define DPRINTF(fmt, ...)                                       \

    do { printf("ECC: " fmt , ## __VA_ARGS__); } while (0)

#else

#define DPRINTF(fmt, ...)

#endif

/* There are 3 versions of this chip used in SMP sun4m systems:

 * MCC (version 0, implementation 0) SS-600MP

 * EMC (version 0, implementation 1) SS-10

 * SMC (version 0, implementation 2) SS-10SX and SS-20

 */

#define ECC_MCC        0x00000000

#define ECC_EMC        0x10000000

#define ECC_SMC        0x20000000

/* Register indexes */

#define ECC_MER        0               /* Memory Enable Register */

#define ECC_MDR        1               /* Memory Delay Register */

#define ECC_MFSR       2               /* Memory Fault Status Register */

#define ECC_VCR        3               /* Video Configuration Register */

#define ECC_MFAR0      4               /* Memory Fault Address Register 0 */

#define ECC_MFAR1      5               /* Memory Fault Address Register 1 */

#define ECC_DR         6               /* Diagnostic Register */

#define ECC_ECR0       7               /* Event Count Register 0 */

#define ECC_ECR1       8               /* Event Count Register 1 */

/* ECC fault control register */

#define ECC_MER_EE     0x00000001      /* Enable ECC checking */

#define ECC_MER_EI     0x00000002      /* Enable Interrupts on

                                          correctable errors */

#define ECC_MER_MRR0   0x00000004      /* SIMM 0 */

#define ECC_MER_MRR1   0x00000008      /* SIMM 1 */

#define ECC_MER_MRR2   0x00000010      /* SIMM 2 */

#define ECC_MER_MRR3   0x00000020      /* SIMM 3 */

#define ECC_MER_MRR4   0x00000040      /* SIMM 4 */

#define ECC_MER_MRR5   0x00000080      /* SIMM 5 */

#define ECC_MER_MRR6   0x00000100      /* SIMM 6 */

#define ECC_MER_MRR7   0x00000200      /* SIMM 7 */

#define ECC_MER_REU    0x00000100      /* Memory Refresh Enable (600MP) */

#define ECC_MER_MRR    0x000003fc      /* MRR mask */

#define ECC_MER_A      0x00000400      /* Memory controller addr map select */

#define ECC_MER_DCI    0x00000800      /* Disables Coherent Invalidate ACK */

#define ECC_MER_VER    0x0f000000      /* Version */

#define ECC_MER_IMPL   0xf0000000      /* Implementation */

#define ECC_MER_MASK_0 0x00000103      /* Version 0 (MCC) mask */

#define ECC_MER_MASK_1 0x00000bff      /* Version 1 (EMC) mask */

#define ECC_MER_MASK_2 0x00000bff      /* Version 2 (SMC) mask */

/* ECC memory delay register */

#define ECC_MDR_RRI    0x000003ff      /* Refresh Request Interval */

#define ECC_MDR_MI     0x00001c00      /* MIH Delay */

#define ECC_MDR_CI     0x0000e000      /* Coherent Invalidate Delay */

#define ECC_MDR_MDL    0x001f0000      /* MBus Master arbitration delay */

#define ECC_MDR_MDH    0x03e00000      /* MBus Master arbitration delay */

#define ECC_MDR_GAD    0x7c000000      /* Graphics Arbitration Delay */

#define ECC_MDR_RSC    0x80000000      /* Refresh load control */

#define ECC_MDR_MASK   0x7fffffff

/* ECC fault status register */

#define ECC_MFSR_CE    0x00000001      /* Correctable error */

#define ECC_MFSR_BS    0x00000002      /* C2 graphics bad slot access */

#define ECC_MFSR_TO    0x00000004      /* Timeout on write */

#define ECC_MFSR_UE    0x00000008      /* Uncorrectable error */

#define ECC_MFSR_DW    0x000000f0      /* Index of double word in block */

#define ECC_MFSR_SYND  0x0000ff00      /* Syndrome for correctable error */

#define ECC_MFSR_ME    0x00010000      /* Multiple errors */

#define ECC_MFSR_C2ERR 0x00020000      /* C2 graphics error */

/* ECC fault address register 0 */

#define ECC_MFAR0_PADDR 0x0000000f     /* PA[32-35] */

#define ECC_MFAR0_TYPE  0x000000f0     /* Transaction type */

#define ECC_MFAR0_SIZE  0x00000700     /* Transaction size */

#define ECC_MFAR0_CACHE 0x00000800     /* Mapped cacheable */

#define ECC_MFAR0_LOCK  0x00001000     /* Error occurred in atomic cycle */

#define ECC_MFAR0_BMODE 0x00002000     /* Boot mode */

#define ECC_MFAR0_VADDR 0x003fc000     /* VA[12-19] (superset bits) */

#define ECC_MFAR0_S     0x08000000     /* Supervisor mode */

#define ECC_MFARO_MID   0xf0000000     /* Module ID */

/* ECC diagnostic register */

#define ECC_DR_CBX     0x00000001

#define ECC_DR_CB0     0x00000002

#define ECC_DR_CB1     0x00000004

#define ECC_DR_CB2     0x00000008

#define ECC_DR_CB4     0x00000010

#define ECC_DR_CB8     0x00000020

#define ECC_DR_CB16    0x00000040

#define ECC_DR_CB32    0x00000080

#define ECC_DR_DMODE   0x00000c00

#define ECC_NREGS      9

#define ECC_SIZE       (ECC_NREGS * sizeof(uint32_t))

#define ECC_DIAG_SIZE  4

#define ECC_DIAG_MASK  (ECC_DIAG_SIZE - 1)

typedef struct ECCState {

    SysBusDevice busdev;

    qemu_irq irq;

    uint32_t regs[ECC_NREGS];

    uint8_t diag[ECC_DIAG_SIZE];

    uint32_t version;

} ECCState;

static void ecc_mem_writel(void *opaque, target_phys_addr_t addr, uint32_t val)

{

    ECCState *s = opaque;

    switch (addr >> 2) {

    case ECC_MER:

        if (s->version == ECC_MCC)

            s->regs[ECC_MER] = (val & ECC_MER_MASK_0);

        else if (s->version == ECC_EMC)

            s->regs[ECC_MER] = s->version | (val & ECC_MER_MASK_1);

        else if (s->version == ECC_SMC)

            s->regs[ECC_MER] = s->version | (val & ECC_MER_MASK_2);

        DPRINTF("Write memory enable %08x\n", val);

        break;

    case ECC_MDR:

        s->regs[ECC_MDR] =  val & ECC_MDR_MASK;

        DPRINTF("Write memory delay %08x\n", val);

        break;

    case ECC_MFSR:

        s->regs[ECC_MFSR] =  val;

        qemu_irq_lower(s->irq);

        DPRINTF("Write memory fault status %08x\n", val);

        break;

    case ECC_VCR:

        s->regs[ECC_VCR] =  val;

        DPRINTF("Write slot configuration %08x\n", val);

        break;

    case ECC_DR:

        s->regs[ECC_DR] =  val;

        DPRINTF("Write diagnostic %08x\n", val);

        break;

    case ECC_ECR0:

        s->regs[ECC_ECR0] =  val;

        DPRINTF("Write event count 1 %08x\n", val);

        break;

    case ECC_ECR1:

        s->regs[ECC_ECR0] =  val;

        DPRINTF("Write event count 2 %08x\n", val);

        break;

    }

}

static uint32_t ecc_mem_readl(void *opaque, target_phys_addr_t addr)

{

    ECCState *s = opaque;

    uint32_t ret = 0;

    switch (addr >> 2) {

    case ECC_MER:

        ret = s->regs[ECC_MER];

        DPRINTF("Read memory enable %08x\n", ret);

        break;

    case ECC_MDR:

        ret = s->regs[ECC_MDR];

        DPRINTF("Read memory delay %08x\n", ret);

        break;

    case ECC_MFSR:

        ret = s->regs[ECC_MFSR];

        DPRINTF("Read memory fault status %08x\n", ret);

        break;

    case ECC_VCR:

        ret = s->regs[ECC_VCR];

        DPRINTF("Read slot configuration %08x\n", ret);

        break;

    case ECC_MFAR0:

        ret = s->regs[ECC_MFAR0];

        DPRINTF("Read memory fault address 0 %08x\n", ret);

        break;

    case ECC_MFAR1:

        ret = s->regs[ECC_MFAR1];

        DPRINTF("Read memory fault address 1 %08x\n", ret);

        break;

    case ECC_DR:

        ret = s->regs[ECC_DR];

        DPRINTF("Read diagnostic %08x\n", ret);

        break;

    case ECC_ECR0:

        ret = s->regs[ECC_ECR0];

        DPRINTF("Read event count 1 %08x\n", ret);

        break;

    case ECC_ECR1:

        ret = s->regs[ECC_ECR0];

        DPRINTF("Read event count 2 %08x\n", ret);

        break;

    }

    return ret;

}

static CPUReadMemoryFunc * const ecc_mem_read[3] = {

    NULL,

    NULL,

    ecc_mem_readl,

};

static CPUWriteMemoryFunc * const ecc_mem_write[3] = {

    NULL,

    NULL,

    ecc_mem_writel,

};

static void ecc_diag_mem_writeb(void *opaque, target_phys_addr_t addr,

                                uint32_t val)

{

    ECCState *s = opaque;

    DPRINTF("Write diagnostic[%d] = %02x\n", (int)addr, val);

    s->diag[addr & ECC_DIAG_MASK] = val;

}

static uint32_t ecc_diag_mem_readb(void *opaque, target_phys_addr_t addr)

{

    ECCState *s = opaque;

    uint32_t ret = s->diag[(int)addr];

    DPRINTF("Read diagnostic[%d] = %02x\n", (int)addr, ret);

    return ret;

}

static CPUReadMemoryFunc * const ecc_diag_mem_read[3] = {

    ecc_diag_mem_readb,

    NULL,

    NULL,

};

static CPUWriteMemoryFunc * const ecc_diag_mem_write[3] = {

    ecc_diag_mem_writeb,

    NULL,

    NULL,

};

static int ecc_load(QEMUFile *f, void *opaque, int version_id)

{

    ECCState *s = opaque;

    int i;

    if (version_id != 3)

        return -EINVAL;

    for (i = 0; i < ECC_NREGS; i++)

        qemu_get_be32s(f, &s->regs[i]);

    for (i = 0; i < ECC_DIAG_SIZE; i++)

        qemu_get_8s(f, &s->diag[i]);

    qemu_get_be32s(f, &s->version);

    return 0;

}

static void ecc_save(QEMUFile *f, void *opaque)

{

    ECCState *s = opaque;

    int i;

    for (i = 0; i < ECC_NREGS; i++)

        qemu_put_be32s(f, &s->regs[i]);

    for (i = 0; i < ECC_DIAG_SIZE; i++)

        qemu_put_8s(f, &s->diag[i]);

    qemu_put_be32s(f, &s->version);

}

static void ecc_reset(void *opaque)

{

    ECCState *s = opaque;

    if (s->version == ECC_MCC)

        s->regs[ECC_MER] &= ECC_MER_REU;

    else

        s->regs[ECC_MER] &= (ECC_MER_VER | ECC_MER_IMPL | ECC_MER_MRR |

                             ECC_MER_DCI);

    s->regs[ECC_MDR] = 0x20;

    s->regs[ECC_MFSR] = 0;

    s->regs[ECC_VCR] = 0;

    s->regs[ECC_MFAR0] = 0x07c00000;

    s->regs[ECC_MFAR1] = 0;

    s->regs[ECC_DR] = 0;

    s->regs[ECC_ECR0] = 0;

    s->regs[ECC_ECR1] = 0;

}

static void ecc_init1(SysBusDevice *dev)

{

    int ecc_io_memory;

    ECCState *s = FROM_SYSBUS(ECCState, dev);

    sysbus_init_irq(dev, &s->irq);

    s->regs[0] = s->version;

    ecc_io_memory = cpu_register_io_memory(ecc_mem_read, ecc_mem_write, s);

    sysbus_init_mmio(dev, ECC_SIZE, ecc_io_memory);

    if (s->version == ECC_MCC) { // SS-600MP only

        ecc_io_memory = cpu_register_io_memory(ecc_diag_mem_read,

                                               ecc_diag_mem_write, s);

        sysbus_init_mmio(dev, ECC_DIAG_SIZE, ecc_io_memory);

    }

    register_savevm("ECC", -1, 3, ecc_save, ecc_load, s);

    qemu_register_reset(ecc_reset, s);

    ecc_reset(s);

}

static SysBusDeviceInfo ecc_info = {

    .init = ecc_init1,

    .qdev.name  = "eccmemctl",

    .qdev.size  = sizeof(ECCState),

    .qdev.props = (Property[]) {

        DEFINE_PROP_HEX32("version", ECCState, version, -1),

        DEFINE_PROP_END_OF_LIST(),

    }

};

static void ecc_register_devices(void)

{

    sysbus_register_withprop(&ecc_info);

}

device_init(ecc_register_devices)