Archipelago » qemu

/*

 * OneNAND flash memories emulation.

 *

 * Copyright (C) 2008 Nokia Corporation

 * Written by Andrzej Zaborowski <andrew@openedhand.com>

 *

 * This program is free software; you can redistribute it and/or

 * modify it under the terms of the GNU General Public License as

 * published by the Free Software Foundation; either version 2 or

 * (at your option) version 3 of the License.

 *

 * This program is distributed in the hope that it will be useful,

 * but WITHOUT ANY WARRANTY; without even the implied warranty of

 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

 * GNU General Public License for more details.

 *

 * You should have received a copy of the GNU General Public License

 * along with this program; if not, write to the Free Software

 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,

 * MA 02111-1307 USA

 */

#include "qemu-common.h"

#include "flash.h"

#include "irq.h"

#include "sysemu.h"

#include "block.h"

/* 11 for 2kB-page OneNAND ("2nd generation") and 10 for 1kB-page chips */

#define PAGE_SHIFT        11

/* Fixed */

#define BLOCK_SHIFT        (PAGE_SHIFT + 6)

struct onenand_s {

    uint32_t id;

    int shift;

    target_phys_addr_t base;

    qemu_irq intr;

    qemu_irq rdy;

    BlockDriverState *bdrv;

    BlockDriverState *bdrv_cur;

    uint8_t *image;

    uint8_t *otp;

    uint8_t *current;

    ram_addr_t ram;

    uint8_t *boot[2];

    uint8_t *data[2][2];

    int iomemtype;

    int cycle;

    int otpmode;

    uint16_t addr[8];

    uint16_t unladdr[8];

    int bufaddr;

    int count;

    uint16_t command;

    uint16_t config[2];

    uint16_t status;

    uint16_t intstatus;

    uint16_t wpstatus;

    struct ecc_state_s ecc;

    int density_mask;

    int secs;

    int secs_cur;

    int blocks;

    uint8_t *blockwp;

};

enum {

    ONEN_BUF_BLOCK = 0,

    ONEN_BUF_BLOCK2 = 1,

    ONEN_BUF_DEST_BLOCK = 2,

    ONEN_BUF_DEST_PAGE = 3,

    ONEN_BUF_PAGE = 7,

};

enum {

    ONEN_ERR_CMD = 1 << 10,

    ONEN_ERR_ERASE = 1 << 11,

    ONEN_ERR_PROG = 1 << 12,

    ONEN_ERR_LOAD = 1 << 13,

};

enum {

    ONEN_INT_RESET = 1 << 4,

    ONEN_INT_ERASE = 1 << 5,

    ONEN_INT_PROG = 1 << 6,

    ONEN_INT_LOAD = 1 << 7,

    ONEN_INT = 1 << 15,

};

enum {

    ONEN_LOCK_LOCKTIGHTEN = 1 << 0,

    ONEN_LOCK_LOCKED = 1 << 1,

    ONEN_LOCK_UNLOCKED = 1 << 2,

};

void onenand_base_update(void *opaque, target_phys_addr_t new)

{

    struct onenand_s *s = (struct onenand_s *) opaque;

    s->base = new;

    /* XXX: We should use IO_MEM_ROMD but we broke it earlier...

     * Both 0x0000 ... 0x01ff and 0x8000 ... 0x800f can be used to

     * write boot commands.  Also take note of the BWPS bit.  */

    cpu_register_physical_memory(s->base + (0x0000 << s->shift),

                    0x0200 << s->shift, s->iomemtype);

    cpu_register_physical_memory(s->base + (0x0200 << s->shift),

                    0xbe00 << s->shift,

                    (s->ram +(0x0200 << s->shift)) | IO_MEM_RAM);

    if (s->iomemtype)

        cpu_register_physical_memory(s->base + (0xc000 << s->shift),

                        0x4000 << s->shift, s->iomemtype);

}

void onenand_base_unmap(void *opaque)

{

    struct onenand_s *s = (struct onenand_s *) opaque;

    cpu_register_physical_memory(s->base,

                    0x10000 << s->shift, IO_MEM_UNASSIGNED);

}

static void onenand_intr_update(struct onenand_s *s)

{

    qemu_set_irq(s->intr, ((s->intstatus >> 15) ^ (~s->config[0] >> 6)) & 1);

}

/* Hot reset (Reset OneNAND command) or warm reset (RP pin low) */

static void onenand_reset(struct onenand_s *s, int cold)

{

    memset(&s->addr, 0, sizeof(s->addr));

    s->command = 0;

    s->count = 1;

    s->bufaddr = 0;

    s->config[0] = 0x40c0;

    s->config[1] = 0x0000;

    onenand_intr_update(s);

    qemu_irq_raise(s->rdy);

    s->status = 0x0000;

    s->intstatus = cold ? 0x8080 : 0x8010;

    s->unladdr[0] = 0;

    s->unladdr[1] = 0;

    s->wpstatus = 0x0002;

    s->cycle = 0;

    s->otpmode = 0;

    s->bdrv_cur = s->bdrv;

    s->current = s->image;

    s->secs_cur = s->secs;

    if (cold) {

        /* Lock the whole flash */

        memset(s->blockwp, ONEN_LOCK_LOCKED, s->blocks);

        if (s->bdrv && bdrv_read(s->bdrv, 0, s->boot[0], 8) < 0)

            cpu_abort(cpu_single_env, "%s: Loading the BootRAM failed.\n",

                            __FUNCTION__);

    }

}

static inline int onenand_load_main(struct onenand_s *s, int sec, int secn,

                void *dest)

{

    if (s->bdrv_cur)

        return bdrv_read(s->bdrv_cur, sec, dest, secn) < 0;

    else if (sec + secn > s->secs_cur)

        return 1;

    memcpy(dest, s->current + (sec << 9), secn << 9);

    return 0;

}

static inline int onenand_prog_main(struct onenand_s *s, int sec, int secn,

                void *src)

{

    if (s->bdrv_cur)

        return bdrv_write(s->bdrv_cur, sec, src, secn) < 0;

    else if (sec + secn > s->secs_cur)

        return 1;

    memcpy(s->current + (sec << 9), src, secn << 9);

    return 0;

}

static inline int onenand_load_spare(struct onenand_s *s, int sec, int secn,

                void *dest)

{

    uint8_t buf[512];

    if (s->bdrv_cur) {

        if (bdrv_read(s->bdrv_cur, s->secs_cur + (sec >> 5), buf, 1) < 0)

            return 1;

        memcpy(dest, buf + ((sec & 31) << 4), secn << 4);

    } else if (sec + secn > s->secs_cur)

        return 1;

    else

        memcpy(dest, s->current + (s->secs_cur << 9) + (sec << 4), secn << 4);

    return 0;

}

static inline int onenand_prog_spare(struct onenand_s *s, int sec, int secn,

                void *src)

{

    uint8_t buf[512];

    if (s->bdrv_cur) {

        if (bdrv_read(s->bdrv_cur, s->secs_cur + (sec >> 5), buf, 1) < 0)

            return 1;

        memcpy(buf + ((sec & 31) << 4), src, secn << 4);

        return bdrv_write(s->bdrv_cur, s->secs_cur + (sec >> 5), buf, 1) < 0;

    } else if (sec + secn > s->secs_cur)

        return 1;

    memcpy(s->current + (s->secs_cur << 9) + (sec << 4), src, secn << 4);

    return 0;

}

static inline int onenand_erase(struct onenand_s *s, int sec, int num)

{

    /* TODO: optimise */

    uint8_t buf[512];

    memset(buf, 0xff, sizeof(buf));

    for (; num > 0; num --, sec ++) {

        if (onenand_prog_main(s, sec, 1, buf))

            return 1;

        if (onenand_prog_spare(s, sec, 1, buf))

            return 1;

    }

    return 0;

}

static void onenand_command(struct onenand_s *s, int cmd)

{

    int b;

    int sec;

    void *buf;

#define SETADDR(block, page)                        \

    sec = (s->addr[page] & 3) +                        \

            ((((s->addr[page] >> 2) & 0x3f) +        \

              (((s->addr[block] & 0xfff) |        \

                (s->addr[block] >> 15 ?                \

                 s->density_mask : 0)) << 6)) << (PAGE_SHIFT - 9));

#define SETBUF_M()                                \

    buf = (s->bufaddr & 8) ?                        \

            s->data[(s->bufaddr >> 2) & 1][0] : s->boot[0];        \

    buf += (s->bufaddr & 3) << 9;

#define SETBUF_S()                                \

    buf = (s->bufaddr & 8) ?                        \

            s->data[(s->bufaddr >> 2) & 1][1] : s->boot[1];        \

    buf += (s->bufaddr & 3) << 4;

    switch (cmd) {

    case 0x00:        /* Load single/multiple sector data unit into buffer */

        SETADDR(ONEN_BUF_BLOCK, ONEN_BUF_PAGE)

        SETBUF_M()

        if (onenand_load_main(s, sec, s->count, buf))

            s->status |= ONEN_ERR_CMD | ONEN_ERR_LOAD;

#if 0

        SETBUF_S()

        if (onenand_load_spare(s, sec, s->count, buf))

            s->status |= ONEN_ERR_CMD | ONEN_ERR_LOAD;

#endif

        /* TODO: if (s->bufaddr & 3) + s->count was > 4 (2k-pages)

         * or    if (s->bufaddr & 1) + s->count was > 2 (1k-pages)

         * then we need two split the read/write into two chunks.

         */

        s->intstatus |= ONEN_INT | ONEN_INT_LOAD;

        break;

    case 0x13:        /* Load single/multiple spare sector into buffer */

        SETADDR(ONEN_BUF_BLOCK, ONEN_BUF_PAGE)

        SETBUF_S()

        if (onenand_load_spare(s, sec, s->count, buf))

            s->status |= ONEN_ERR_CMD | ONEN_ERR_LOAD;

        /* TODO: if (s->bufaddr & 3) + s->count was > 4 (2k-pages)

         * or    if (s->bufaddr & 1) + s->count was > 2 (1k-pages)

         * then we need two split the read/write into two chunks.

         */

        s->intstatus |= ONEN_INT | ONEN_INT_LOAD;

        break;

    case 0x80:        /* Program single/multiple sector data unit from buffer */

        SETADDR(ONEN_BUF_BLOCK, ONEN_BUF_PAGE)

        SETBUF_M()

        if (onenand_prog_main(s, sec, s->count, buf))

            s->status |= ONEN_ERR_CMD | ONEN_ERR_PROG;

#if 0

        SETBUF_S()

        if (onenand_prog_spare(s, sec, s->count, buf))

            s->status |= ONEN_ERR_CMD | ONEN_ERR_PROG;

#endif

        /* TODO: if (s->bufaddr & 3) + s->count was > 4 (2k-pages)

         * or    if (s->bufaddr & 1) + s->count was > 2 (1k-pages)

         * then we need two split the read/write into two chunks.

         */

        s->intstatus |= ONEN_INT | ONEN_INT_PROG;

        break;

    case 0x1a:        /* Program single/multiple spare area sector from buffer */

        SETADDR(ONEN_BUF_BLOCK, ONEN_BUF_PAGE)

        SETBUF_S()

        if (onenand_prog_spare(s, sec, s->count, buf))

            s->status |= ONEN_ERR_CMD | ONEN_ERR_PROG;

        /* TODO: if (s->bufaddr & 3) + s->count was > 4 (2k-pages)

         * or    if (s->bufaddr & 1) + s->count was > 2 (1k-pages)

         * then we need two split the read/write into two chunks.

         */

        s->intstatus |= ONEN_INT | ONEN_INT_PROG;

        break;

    case 0x1b:        /* Copy-back program */

        SETBUF_S()

        SETADDR(ONEN_BUF_BLOCK, ONEN_BUF_PAGE)

        if (onenand_load_main(s, sec, s->count, buf))

            s->status |= ONEN_ERR_CMD | ONEN_ERR_PROG;

        SETADDR(ONEN_BUF_DEST_BLOCK, ONEN_BUF_DEST_PAGE)

        if (onenand_prog_main(s, sec, s->count, buf))

            s->status |= ONEN_ERR_CMD | ONEN_ERR_PROG;

        /* TODO: spare areas */

        s->intstatus |= ONEN_INT | ONEN_INT_PROG;

        break;

    case 0x23:        /* Unlock NAND array block(s) */

        s->intstatus |= ONEN_INT;

        /* XXX the previous (?) area should be locked automatically */

        for (b = s->unladdr[0]; b <= s->unladdr[1]; b ++) {

            if (b >= s->blocks) {

                s->status |= ONEN_ERR_CMD;

                break;

            }

            if (s->blockwp[b] == ONEN_LOCK_LOCKTIGHTEN)

                break;

            s->wpstatus = s->blockwp[b] = ONEN_LOCK_UNLOCKED;

        }

        break;

    case 0x27:        /* Unlock All NAND array blocks */

        s->intstatus |= ONEN_INT;

        for (b = 0; b < s->blocks; b ++) {

            if (b >= s->blocks) {

                s->status |= ONEN_ERR_CMD;

                break;

            }

            if (s->blockwp[b] == ONEN_LOCK_LOCKTIGHTEN)

                break;

            s->wpstatus = s->blockwp[b] = ONEN_LOCK_UNLOCKED;

        }

        break;

    case 0x2a:        /* Lock NAND array block(s) */

        s->intstatus |= ONEN_INT;

        for (b = s->unladdr[0]; b <= s->unladdr[1]; b ++) {

            if (b >= s->blocks) {

                s->status |= ONEN_ERR_CMD;

                break;

            }

            if (s->blockwp[b] == ONEN_LOCK_LOCKTIGHTEN)

                break;

            s->wpstatus = s->blockwp[b] = ONEN_LOCK_LOCKED;

        }

        break;

    case 0x2c:        /* Lock-tight NAND array block(s) */

        s->intstatus |= ONEN_INT;

        for (b = s->unladdr[0]; b <= s->unladdr[1]; b ++) {

            if (b >= s->blocks) {

                s->status |= ONEN_ERR_CMD;

                break;

            }

            if (s->blockwp[b] == ONEN_LOCK_UNLOCKED)

                continue;

            s->wpstatus = s->blockwp[b] = ONEN_LOCK_LOCKTIGHTEN;

        }

        break;

    case 0x71:        /* Erase-Verify-Read */

        s->intstatus |= ONEN_INT;

        break;

    case 0x95:        /* Multi-block erase */

        qemu_irq_pulse(s->intr);

        /* Fall through.  */

    case 0x94:        /* Block erase */

        sec = ((s->addr[ONEN_BUF_BLOCK] & 0xfff) |

                        (s->addr[ONEN_BUF_BLOCK] >> 15 ? s->density_mask : 0))

                << (BLOCK_SHIFT - 9);

        if (onenand_erase(s, sec, 1 << (BLOCK_SHIFT - 9)))

            s->status |= ONEN_ERR_CMD | ONEN_ERR_ERASE;

        s->intstatus |= ONEN_INT | ONEN_INT_ERASE;

        break;

    case 0xb0:        /* Erase suspend */

        break;

    case 0x30:        /* Erase resume */

        s->intstatus |= ONEN_INT | ONEN_INT_ERASE;

        break;

    case 0xf0:        /* Reset NAND Flash core */

        onenand_reset(s, 0);

        break;

    case 0xf3:        /* Reset OneNAND */

        onenand_reset(s, 0);

        break;

    case 0x65:        /* OTP Access */

        s->intstatus |= ONEN_INT;

        s->bdrv_cur = 0;

        s->current = s->otp;

        s->secs_cur = 1 << (BLOCK_SHIFT - 9);

        s->addr[ONEN_BUF_BLOCK] = 0;

        s->otpmode = 1;

        break;

    default:

        s->status |= ONEN_ERR_CMD;

        s->intstatus |= ONEN_INT;

        fprintf(stderr, "%s: unknown OneNAND command %x\n",

                        __FUNCTION__, cmd);

    }

    onenand_intr_update(s);

}

static uint32_t onenand_read(void *opaque, target_phys_addr_t addr)

{

    struct onenand_s *s = (struct onenand_s *) opaque;

    int offset = (addr - s->base) >> s->shift;

    switch (offset) {

    case 0x0000 ... 0xc000:

        return lduw_le_p(s->boot[0] + (addr - s->base));

    case 0xf000:        /* Manufacturer ID */

        return (s->id >> 16) & 0xff;

    case 0xf001:        /* Device ID */

        return (s->id >>  8) & 0xff;

    /* TODO: get the following values from a real chip!  */

    case 0xf002:        /* Version ID */

        return (s->id >>  0) & 0xff;

    case 0xf003:        /* Data Buffer size */

        return 1 << PAGE_SHIFT;

    case 0xf004:        /* Boot Buffer size */

        return 0x200;

    case 0xf005:        /* Amount of buffers */

        return 1 | (2 << 8);

    case 0xf006:        /* Technology */

        return 0;

    case 0xf100 ... 0xf107:        /* Start addresses */

        return s->addr[offset - 0xf100];

    case 0xf200:        /* Start buffer */

        return (s->bufaddr << 8) | ((s->count - 1) & (1 << (PAGE_SHIFT - 10)));

    case 0xf220:        /* Command */

        return s->command;

    case 0xf221:        /* System Configuration 1 */

        return s->config[0] & 0xffe0;

    case 0xf222:        /* System Configuration 2 */

        return s->config[1];

    case 0xf240:        /* Controller Status */

        return s->status;

    case 0xf241:        /* Interrupt */

        return s->intstatus;

    case 0xf24c:        /* Unlock Start Block Address */

        return s->unladdr[0];

    case 0xf24d:        /* Unlock End Block Address */

        return s->unladdr[1];

    case 0xf24e:        /* Write Protection Status */

        return s->wpstatus;

    case 0xff00:        /* ECC Status */

        return 0x00;

    case 0xff01:        /* ECC Result of main area data */

    case 0xff02:        /* ECC Result of spare area data */

    case 0xff03:        /* ECC Result of main area data */

    case 0xff04:        /* ECC Result of spare area data */

        cpu_abort(cpu_single_env, "%s: imeplement ECC\n", __FUNCTION__);

        return 0x0000;

    }

    fprintf(stderr, "%s: unknown OneNAND register %x\n",

                    __FUNCTION__, offset);

    return 0;

}

static void onenand_write(void *opaque, target_phys_addr_t addr,

                uint32_t value)

{

    struct onenand_s *s = (struct onenand_s *) opaque;

    int offset = (addr - s->base) >> s->shift;

    int sec;

    switch (offset) {

    case 0x0000 ... 0x01ff:

    case 0x8000 ... 0x800f:

        if (s->cycle) {

            s->cycle = 0;

            if (value == 0x0000) {

                SETADDR(ONEN_BUF_BLOCK, ONEN_BUF_PAGE)

                onenand_load_main(s, sec,

                                1 << (PAGE_SHIFT - 9), s->data[0][0]);

                s->addr[ONEN_BUF_PAGE] += 4;

                s->addr[ONEN_BUF_PAGE] &= 0xff;

            }

            break;

        }

        switch (value) {

        case 0x00f0:        /* Reset OneNAND */

            onenand_reset(s, 0);

            break;

        case 0x00e0:        /* Load Data into Buffer */

            s->cycle = 1;

            break;

        case 0x0090:        /* Read Identification Data */

            memset(s->boot[0], 0, 3 << s->shift);

            s->boot[0][0 << s->shift] = (s->id >> 16) & 0xff;

            s->boot[0][1 << s->shift] = (s->id >>  8) & 0xff;

            s->boot[0][2 << s->shift] = s->wpstatus & 0xff;

            break;

        default:

            fprintf(stderr, "%s: unknown OneNAND boot command %x\n",

                            __FUNCTION__, value);

        }

        break;

    case 0xf100 ... 0xf107:        /* Start addresses */

        s->addr[offset - 0xf100] = value;

        break;

    case 0xf200:        /* Start buffer */

        s->bufaddr = (value >> 8) & 0xf;

        if (PAGE_SHIFT == 11)

            s->count = (value & 3) ?: 4;

        else if (PAGE_SHIFT == 10)

            s->count = (value & 1) ?: 2;

        break;

    case 0xf220:        /* Command */

        if (s->intstatus & (1 << 15))

            break;

        s->command = value;

        onenand_command(s, s->command);

        break;

    case 0xf221:        /* System Configuration 1 */

        s->config[0] = value;

        onenand_intr_update(s);

        qemu_set_irq(s->rdy, (s->config[0] >> 7) & 1);

        break;

    case 0xf222:        /* System Configuration 2 */

        s->config[1] = value;

        break;

    case 0xf241:        /* Interrupt */

        s->intstatus &= value;

        if ((1 << 15) & ~s->intstatus)

            s->status &= ~(ONEN_ERR_CMD | ONEN_ERR_ERASE |

                            ONEN_ERR_PROG | ONEN_ERR_LOAD);

        onenand_intr_update(s);

        break;

    case 0xf24c:        /* Unlock Start Block Address */

        s->unladdr[0] = value & (s->blocks - 1);

        /* For some reason we have to set the end address to by default

         * be same as start because the software forgets to write anything

         * in there.  */

        s->unladdr[1] = value & (s->blocks - 1);

        break;

    case 0xf24d:        /* Unlock End Block Address */

        s->unladdr[1] = value & (s->blocks - 1);

        break;

    default:

        fprintf(stderr, "%s: unknown OneNAND register %x\n",

                        __FUNCTION__, offset);

    }

}

static CPUReadMemoryFunc *onenand_readfn[] = {

    onenand_read,        /* TODO */

    onenand_read,

    onenand_read,

};

static CPUWriteMemoryFunc *onenand_writefn[] = {

    onenand_write,        /* TODO */

    onenand_write,

    onenand_write,

};

void *onenand_init(uint32_t id, int regshift, qemu_irq irq)

{

    struct onenand_s *s = (struct onenand_s *) qemu_mallocz(sizeof(*s));

    int bdrv_index = drive_get_index(IF_MTD, 0, 0);

    uint32_t size = 1 << (24 + ((id >> 12) & 7));

    void *ram;

    s->shift = regshift;

    s->intr = irq;

    s->rdy = 0;

    s->id = id;

    s->blocks = size >> BLOCK_SHIFT;

    s->secs = size >> 9;

    s->blockwp = qemu_malloc(s->blocks);

    s->density_mask = (id & (1 << 11)) ? (1 << (6 + ((id >> 12) & 7))) : 0;

    s->iomemtype = cpu_register_io_memory(0, onenand_readfn,

                    onenand_writefn, s);

    if (bdrv_index == -1)

        s->image = memset(qemu_malloc(size + (size >> 5)),

                        0xff, size + (size >> 5));

    else

        s->bdrv = drives_table[bdrv_index].bdrv;

    s->otp = memset(qemu_malloc((64 + 2) << PAGE_SHIFT),

                    0xff, (64 + 2) << PAGE_SHIFT);

    s->ram = qemu_ram_alloc(0xc000 << s->shift);

    ram = phys_ram_base + s->ram;

    s->boot[0] = ram + (0x0000 << s->shift);

    s->boot[1] = ram + (0x8000 << s->shift);

    s->data[0][0] = ram + ((0x0200 + (0 << (PAGE_SHIFT - 1))) << s->shift);

    s->data[0][1] = ram + ((0x8010 + (0 << (PAGE_SHIFT - 6))) << s->shift);

    s->data[1][0] = ram + ((0x0200 + (1 << (PAGE_SHIFT - 1))) << s->shift);

    s->data[1][1] = ram + ((0x8010 + (1 << (PAGE_SHIFT - 6))) << s->shift);

    onenand_reset(s, 1);

    return s;

}

void *onenand_raw_otp(void *opaque)

{

    struct onenand_s *s = (struct onenand_s *) opaque;

    return s->otp;

}