Archipelago » qemu

/* Print mips instructions for GDB, the GNU debugger, or for objdump.

   Copyright 1989, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,

   2000, 2001, 2002, 2003

   Free Software Foundation, Inc.

   Contributed by Nobuyuki Hikichi(hikichi@sra.co.jp).

This file is part of GDB, GAS, and the GNU binutils.

This program is free software; you can redistribute it and/or modify

it under the terms of the GNU General Public License as published by

the Free Software Foundation; either version 2 of the License, or

(at your option) any later version.

This program is distributed in the hope that it will be useful,

but WITHOUT ANY WARRANTY; without even the implied warranty of

MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

GNU General Public License for more details.

You should have received a copy of the GNU General Public License

along with this program; if not, write to the Free Software

Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */

#include "dis-asm.h"

/* mips.h.  Mips opcode list for GDB, the GNU debugger.

   Copyright 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003

   Free Software Foundation, Inc.

   Contributed by Ralph Campbell and OSF

   Commented and modified by Ian Lance Taylor, Cygnus Support

This file is part of GDB, GAS, and the GNU binutils.

GDB, GAS, and the GNU binutils are free software; you can redistribute

them and/or modify them under the terms of the GNU General Public

License as published by the Free Software Foundation; either version

1, or (at your option) any later version.

GDB, GAS, and the GNU binutils are distributed in the hope that they

will be useful, but WITHOUT ANY WARRANTY; without even the implied

warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See

the GNU General Public License for more details.

You should have received a copy of the GNU General Public License

along with this file; see the file COPYING.  If not, write to the Free

Software Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */

/* mips.h.  Mips opcode list for GDB, the GNU debugger.

   Copyright 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003

   Free Software Foundation, Inc.

   Contributed by Ralph Campbell and OSF

   Commented and modified by Ian Lance Taylor, Cygnus Support

This file is part of GDB, GAS, and the GNU binutils.

GDB, GAS, and the GNU binutils are free software; you can redistribute

them and/or modify them under the terms of the GNU General Public

License as published by the Free Software Foundation; either version

1, or (at your option) any later version.

GDB, GAS, and the GNU binutils are distributed in the hope that they

will be useful, but WITHOUT ANY WARRANTY; without even the implied

warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See

the GNU General Public License for more details.

You should have received a copy of the GNU General Public License

along with this file; see the file COPYING.  If not, write to the Free

Software Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */

/* These are bit masks and shift counts to use to access the various

   fields of an instruction.  To retrieve the X field of an

   instruction, use the expression

        (i >> OP_SH_X) & OP_MASK_X

   To set the same field (to j), use

        i = (i &~ (OP_MASK_X << OP_SH_X)) | (j << OP_SH_X)

   Make sure you use fields that are appropriate for the instruction,

   of course.

   The 'i' format uses OP, RS, RT and IMMEDIATE.

   The 'j' format uses OP and TARGET.

   The 'r' format uses OP, RS, RT, RD, SHAMT and FUNCT.

   The 'b' format uses OP, RS, RT and DELTA.

   The floating point 'i' format uses OP, RS, RT and IMMEDIATE.

   The floating point 'r' format uses OP, FMT, FT, FS, FD and FUNCT.

   A breakpoint instruction uses OP, CODE and SPEC (10 bits of the

   breakpoint instruction are not defined; Kane says the breakpoint

   code field in BREAK is 20 bits; yet MIPS assemblers and debuggers

   only use ten bits).  An optional two-operand form of break/sdbbp

   allows the lower ten bits to be set too, and MIPS32 and later

   architectures allow 20 bits to be set with a signal operand

   (using CODE20).

   The syscall instruction uses CODE20.

   The general coprocessor instructions use COPZ.  */

#define OP_MASK_OP                0x3f

#define OP_SH_OP                26

#define OP_MASK_RS                0x1f

#define OP_SH_RS                21

#define OP_MASK_FR                0x1f

#define OP_SH_FR                21

#define OP_MASK_FMT                0x1f

#define OP_SH_FMT                21

#define OP_MASK_BCC                0x7

#define OP_SH_BCC                18

#define OP_MASK_CODE                0x3ff

#define OP_SH_CODE                16

#define OP_MASK_CODE2                0x3ff

#define OP_SH_CODE2                6

#define OP_MASK_RT                0x1f

#define OP_SH_RT                16

#define OP_MASK_FT                0x1f

#define OP_SH_FT                16

#define OP_MASK_CACHE                0x1f

#define OP_SH_CACHE                16

#define OP_MASK_RD                0x1f

#define OP_SH_RD                11

#define OP_MASK_FS                0x1f

#define OP_SH_FS                11

#define OP_MASK_PREFX                0x1f

#define OP_SH_PREFX                11

#define OP_MASK_CCC                0x7

#define OP_SH_CCC                8

#define OP_MASK_CODE20                0xfffff /* 20 bit syscall/breakpoint code.  */

#define OP_SH_CODE20                6

#define OP_MASK_SHAMT                0x1f

#define OP_SH_SHAMT                6

#define OP_MASK_FD                0x1f

#define OP_SH_FD                6

#define OP_MASK_TARGET                0x3ffffff

#define OP_SH_TARGET                0

#define OP_MASK_COPZ                0x1ffffff

#define OP_SH_COPZ                0

#define OP_MASK_IMMEDIATE        0xffff

#define OP_SH_IMMEDIATE                0

#define OP_MASK_DELTA                0xffff

#define OP_SH_DELTA                0

#define OP_MASK_FUNCT                0x3f

#define OP_SH_FUNCT                0

#define OP_MASK_SPEC                0x3f

#define OP_SH_SPEC                0

#define OP_SH_LOCC              8       /* FP condition code.  */

#define OP_SH_HICC              18      /* FP condition code.  */

#define OP_MASK_CC              0x7

#define OP_SH_COP1NORM          25      /* Normal COP1 encoding.  */

#define OP_MASK_COP1NORM        0x1     /* a single bit.  */

#define OP_SH_COP1SPEC          21      /* COP1 encodings.  */

#define OP_MASK_COP1SPEC        0xf

#define OP_MASK_COP1SCLR        0x4

#define OP_MASK_COP1CMP         0x3

#define OP_SH_COP1CMP           4

#define OP_SH_FORMAT            21      /* FP short format field.  */

#define OP_MASK_FORMAT          0x7

#define OP_SH_TRUE              16

#define OP_MASK_TRUE            0x1

#define OP_SH_GE                17

#define OP_MASK_GE              0x01

#define OP_SH_UNSIGNED          16

#define OP_MASK_UNSIGNED        0x1

#define OP_SH_HINT              16

#define OP_MASK_HINT            0x1f

#define OP_SH_MMI               0       /* Multimedia (parallel) op.  */

#define OP_MASK_MMI             0x3f

#define OP_SH_MMISUB            6

#define OP_MASK_MMISUB          0x1f

#define OP_MASK_PERFREG                0x1f        /* Performance monitoring.  */

#define OP_SH_PERFREG                1

#define OP_SH_SEL                0        /* Coprocessor select field.  */

#define OP_MASK_SEL                0x7        /* The sel field of mfcZ and mtcZ.  */

#define OP_SH_CODE19                6       /* 19 bit wait code.  */

#define OP_MASK_CODE19                0x7ffff

#define OP_SH_ALN                21

#define OP_MASK_ALN                0x7

#define OP_SH_VSEL                21

#define OP_MASK_VSEL                0x1f

#define OP_MASK_VECBYTE                0x7        /* Selector field is really 4 bits,

                                           but 0x8-0xf don't select bytes.  */

#define OP_SH_VECBYTE                22

#define OP_MASK_VECALIGN        0x7        /* Vector byte-align (alni.ob) op.  */

#define OP_SH_VECALIGN                21

#define OP_MASK_INSMSB                0x1f        /* "ins" MSB.  */

#define OP_SH_INSMSB                11

#define OP_MASK_EXTMSBD                0x1f        /* "ext" MSBD.  */

#define OP_SH_EXTMSBD                11

#define        OP_OP_COP0                0x10

#define        OP_OP_COP1                0x11

#define        OP_OP_COP2                0x12

#define        OP_OP_COP3                0x13

#define        OP_OP_LWC1                0x31

#define        OP_OP_LWC2                0x32

#define        OP_OP_LWC3                0x33        /* a.k.a. pref */

#define        OP_OP_LDC1                0x35

#define        OP_OP_LDC2                0x36

#define        OP_OP_LDC3                0x37        /* a.k.a. ld */

#define        OP_OP_SWC1                0x39

#define        OP_OP_SWC2                0x3a

#define        OP_OP_SWC3                0x3b

#define        OP_OP_SDC1                0x3d

#define        OP_OP_SDC2                0x3e

#define        OP_OP_SDC3                0x3f        /* a.k.a. sd */

/* MIPS DSP ASE */

#define OP_SH_DSPACC                11

#define OP_MASK_DSPACC          0x3

#define OP_SH_DSPACC_S          21

#define OP_MASK_DSPACC_S        0x3

#define OP_SH_DSPSFT                20

#define OP_MASK_DSPSFT          0x3f

#define OP_SH_DSPSFT_7          19

#define OP_MASK_DSPSFT_7        0x7f

#define OP_SH_SA3                21

#define OP_MASK_SA3                0x7

#define OP_SH_SA4                21

#define OP_MASK_SA4                0xf

#define OP_SH_IMM8                16

#define OP_MASK_IMM8                0xff

#define OP_SH_IMM10                16

#define OP_MASK_IMM10                0x3ff

#define OP_SH_WRDSP                11

#define OP_MASK_WRDSP                0x3f

#define OP_SH_RDDSP                16

#define OP_MASK_RDDSP                0x3f

#define OP_SH_BP                11

#define OP_MASK_BP                0x3

/* MIPS MT ASE */

#define OP_SH_MT_U                5

#define OP_MASK_MT_U                0x1

#define OP_SH_MT_H                4

#define OP_MASK_MT_H                0x1

#define OP_SH_MTACC_T                18

#define OP_MASK_MTACC_T                0x3

#define OP_SH_MTACC_D                13

#define OP_MASK_MTACC_D                0x3

#define        OP_OP_COP0                0x10

#define        OP_OP_COP1                0x11

#define        OP_OP_COP2                0x12

#define        OP_OP_COP3                0x13

#define        OP_OP_LWC1                0x31

#define        OP_OP_LWC2                0x32

#define        OP_OP_LWC3                0x33        /* a.k.a. pref */

#define        OP_OP_LDC1                0x35

#define        OP_OP_LDC2                0x36

#define        OP_OP_LDC3                0x37        /* a.k.a. ld */

#define        OP_OP_SWC1                0x39

#define        OP_OP_SWC2                0x3a

#define        OP_OP_SWC3                0x3b

#define        OP_OP_SDC1                0x3d

#define        OP_OP_SDC2                0x3e

#define        OP_OP_SDC3                0x3f        /* a.k.a. sd */

/* Values in the 'VSEL' field.  */

#define MDMX_FMTSEL_IMM_QH        0x1d

#define MDMX_FMTSEL_IMM_OB        0x1e

#define MDMX_FMTSEL_VEC_QH        0x15

#define MDMX_FMTSEL_VEC_OB        0x16

/* UDI */

#define OP_SH_UDI1                6

#define OP_MASK_UDI1                0x1f

#define OP_SH_UDI2                6

#define OP_MASK_UDI2                0x3ff

#define OP_SH_UDI3                6

#define OP_MASK_UDI3                0x7fff

#define OP_SH_UDI4                6

#define OP_MASK_UDI4                0xfffff

/* This structure holds information for a particular instruction.  */

struct mips_opcode

{

  /* The name of the instruction.  */

  const char *name;

  /* A string describing the arguments for this instruction.  */

  const char *args;

  /* The basic opcode for the instruction.  When assembling, this

     opcode is modified by the arguments to produce the actual opcode

     that is used.  If pinfo is INSN_MACRO, then this is 0.  */

  unsigned long match;

  /* If pinfo is not INSN_MACRO, then this is a bit mask for the

     relevant portions of the opcode when disassembling.  If the

     actual opcode anded with the match field equals the opcode field,

     then we have found the correct instruction.  If pinfo is

     INSN_MACRO, then this field is the macro identifier.  */

  unsigned long mask;

  /* For a macro, this is INSN_MACRO.  Otherwise, it is a collection

     of bits describing the instruction, notably any relevant hazard

     information.  */

  unsigned long pinfo;

  /* A collection of additional bits describing the instruction. */

  unsigned long pinfo2;

  /* A collection of bits describing the instruction sets of which this

     instruction or macro is a member. */

  unsigned long membership;

};

/* These are the characters which may appear in the args field of an

   instruction.  They appear in the order in which the fields appear

   when the instruction is used.  Commas and parentheses in the args

   string are ignored when assembling, and written into the output

   when disassembling.

   Each of these characters corresponds to a mask field defined above.

   "<" 5 bit shift amount (OP_*_SHAMT)

   ">" shift amount between 32 and 63, stored after subtracting 32 (OP_*_SHAMT)

   "a" 26 bit target address (OP_*_TARGET)

   "b" 5 bit base register (OP_*_RS)

   "c" 10 bit breakpoint code (OP_*_CODE)

   "d" 5 bit destination register specifier (OP_*_RD)

   "h" 5 bit prefx hint (OP_*_PREFX)

   "i" 16 bit unsigned immediate (OP_*_IMMEDIATE)

   "j" 16 bit signed immediate (OP_*_DELTA)

   "k" 5 bit cache opcode in target register position (OP_*_CACHE)

       Also used for immediate operands in vr5400 vector insns.

   "o" 16 bit signed offset (OP_*_DELTA)

   "p" 16 bit PC relative branch target address (OP_*_DELTA)

   "q" 10 bit extra breakpoint code (OP_*_CODE2)

   "r" 5 bit same register used as both source and target (OP_*_RS)

   "s" 5 bit source register specifier (OP_*_RS)

   "t" 5 bit target register (OP_*_RT)

   "u" 16 bit upper 16 bits of address (OP_*_IMMEDIATE)

   "v" 5 bit same register used as both source and destination (OP_*_RS)

   "w" 5 bit same register used as both target and destination (OP_*_RT)

   "U" 5 bit same destination register in both OP_*_RD and OP_*_RT

       (used by clo and clz)

   "C" 25 bit coprocessor function code (OP_*_COPZ)

   "B" 20 bit syscall/breakpoint function code (OP_*_CODE20)

   "J" 19 bit wait function code (OP_*_CODE19)

   "x" accept and ignore register name

   "z" must be zero register

   "K" 5 bit Hardware Register (rdhwr instruction) (OP_*_RD)

   "+A" 5 bit ins/ext/dins/dext/dinsm/dextm position, which becomes

        LSB (OP_*_SHAMT).

        Enforces: 0 <= pos < 32.

   "+B" 5 bit ins/dins size, which becomes MSB (OP_*_INSMSB).

        Requires that "+A" or "+E" occur first to set position.

        Enforces: 0 < (pos+size) <= 32.

   "+C" 5 bit ext/dext size, which becomes MSBD (OP_*_EXTMSBD).

        Requires that "+A" or "+E" occur first to set position.

        Enforces: 0 < (pos+size) <= 32.

        (Also used by "dext" w/ different limits, but limits for

        that are checked by the M_DEXT macro.)

   "+E" 5 bit dinsu/dextu position, which becomes LSB-32 (OP_*_SHAMT).

        Enforces: 32 <= pos < 64.

   "+F" 5 bit "dinsm/dinsu" size, which becomes MSB-32 (OP_*_INSMSB).

        Requires that "+A" or "+E" occur first to set position.

        Enforces: 32 < (pos+size) <= 64.

   "+G" 5 bit "dextm" size, which becomes MSBD-32 (OP_*_EXTMSBD).

        Requires that "+A" or "+E" occur first to set position.

        Enforces: 32 < (pos+size) <= 64.

   "+H" 5 bit "dextu" size, which becomes MSBD (OP_*_EXTMSBD).

        Requires that "+A" or "+E" occur first to set position.

        Enforces: 32 < (pos+size) <= 64.

   Floating point instructions:

   "D" 5 bit destination register (OP_*_FD)

   "M" 3 bit compare condition code (OP_*_CCC) (only used for mips4 and up)

   "N" 3 bit branch condition code (OP_*_BCC) (only used for mips4 and up)

   "S" 5 bit fs source 1 register (OP_*_FS)

   "T" 5 bit ft source 2 register (OP_*_FT)

   "R" 5 bit fr source 3 register (OP_*_FR)

   "V" 5 bit same register used as floating source and destination (OP_*_FS)

   "W" 5 bit same register used as floating target and destination (OP_*_FT)

   Coprocessor instructions:

   "E" 5 bit target register (OP_*_RT)

   "G" 5 bit destination register (OP_*_RD)

   "H" 3 bit sel field for (d)mtc* and (d)mfc* (OP_*_SEL)

   "P" 5 bit performance-monitor register (OP_*_PERFREG)

   "e" 5 bit vector register byte specifier (OP_*_VECBYTE)

   "%" 3 bit immediate vr5400 vector alignment operand (OP_*_VECALIGN)

   see also "k" above

   "+D" Combined destination register ("G") and sel ("H") for CP0 ops,

        for pretty-printing in disassembly only.

   Macro instructions:

   "A" General 32 bit expression

   "I" 32 bit immediate (value placed in imm_expr).

   "+I" 32 bit immediate (value placed in imm2_expr).

   "F" 64 bit floating point constant in .rdata

   "L" 64 bit floating point constant in .lit8

   "f" 32 bit floating point constant

   "l" 32 bit floating point constant in .lit4

   MDMX instruction operands (note that while these use the FP register

   fields, they accept both $fN and $vN names for the registers):  

   "O"        MDMX alignment offset (OP_*_ALN)

   "Q"        MDMX vector/scalar/immediate source (OP_*_VSEL and OP_*_FT)

   "X"        MDMX destination register (OP_*_FD) 

   "Y"        MDMX source register (OP_*_FS)

   "Z"        MDMX source register (OP_*_FT)

   DSP ASE usage:

   "2" 2 bit unsigned immediate for byte align (OP_*_BP)

   "3" 3 bit unsigned immediate (OP_*_SA3)

   "4" 4 bit unsigned immediate (OP_*_SA4)

   "5" 8 bit unsigned immediate (OP_*_IMM8)

   "6" 5 bit unsigned immediate (OP_*_RS)

   "7" 2 bit dsp accumulator register (OP_*_DSPACC)

   "8" 6 bit unsigned immediate (OP_*_WRDSP)

   "9" 2 bit dsp accumulator register (OP_*_DSPACC_S)

   "0" 6 bit signed immediate (OP_*_DSPSFT)

   ":" 7 bit signed immediate (OP_*_DSPSFT_7)

   "'" 6 bit unsigned immediate (OP_*_RDDSP)

   "@" 10 bit signed immediate (OP_*_IMM10)

   MT ASE usage:

   "!" 1 bit usermode flag (OP_*_MT_U)

   "$" 1 bit load high flag (OP_*_MT_H)

   "*" 2 bit dsp/smartmips accumulator register (OP_*_MTACC_T)

   "&" 2 bit dsp/smartmips accumulator register (OP_*_MTACC_D)

   "g" 5 bit coprocessor 1 and 2 destination register (OP_*_RD)

   "+t" 5 bit coprocessor 0 destination register (OP_*_RT)

   "+T" 5 bit coprocessor 0 destination register (OP_*_RT) - disassembly only

   UDI immediates:

   "+1" UDI immediate bits 6-10

   "+2" UDI immediate bits 6-15

   "+3" UDI immediate bits 6-20

   "+4" UDI immediate bits 6-25

   Other:

   "()" parens surrounding optional value

   ","  separates operands

   "[]" brackets around index for vector-op scalar operand specifier (vr5400)

   "+"  Start of extension sequence.

   Characters used so far, for quick reference when adding more:

   "234567890"

   "%[]<>(),+:'@!$*&"

   "ABCDEFGHIJKLMNOPQRSTUVWXYZ"

   "abcdefghijklopqrstuvwxz"

   Extension character sequences used so far ("+" followed by the

   following), for quick reference when adding more:

   "1234"

   "ABCDEFGHIT"

   "t"

*/

/* These are the bits which may be set in the pinfo field of an

   instructions, if it is not equal to INSN_MACRO.  */

/* Modifies the general purpose register in OP_*_RD.  */

#define INSN_WRITE_GPR_D            0x00000001

/* Modifies the general purpose register in OP_*_RT.  */

#define INSN_WRITE_GPR_T            0x00000002

/* Modifies general purpose register 31.  */

#define INSN_WRITE_GPR_31           0x00000004

/* Modifies the floating point register in OP_*_FD.  */

#define INSN_WRITE_FPR_D            0x00000008

/* Modifies the floating point register in OP_*_FS.  */

#define INSN_WRITE_FPR_S            0x00000010

/* Modifies the floating point register in OP_*_FT.  */

#define INSN_WRITE_FPR_T            0x00000020

/* Reads the general purpose register in OP_*_RS.  */

#define INSN_READ_GPR_S             0x00000040

/* Reads the general purpose register in OP_*_RT.  */

#define INSN_READ_GPR_T             0x00000080

/* Reads the floating point register in OP_*_FS.  */

#define INSN_READ_FPR_S             0x00000100

/* Reads the floating point register in OP_*_FT.  */

#define INSN_READ_FPR_T             0x00000200

/* Reads the floating point register in OP_*_FR.  */

#define INSN_READ_FPR_R                    0x00000400

/* Modifies coprocessor condition code.  */

#define INSN_WRITE_COND_CODE        0x00000800

/* Reads coprocessor condition code.  */

#define INSN_READ_COND_CODE         0x00001000

/* TLB operation.  */

#define INSN_TLB                    0x00002000

/* Reads coprocessor register other than floating point register.  */

#define INSN_COP                    0x00004000

/* Instruction loads value from memory, requiring delay.  */

#define INSN_LOAD_MEMORY_DELAY      0x00008000

/* Instruction loads value from coprocessor, requiring delay.  */

#define INSN_LOAD_COPROC_DELAY            0x00010000

/* Instruction has unconditional branch delay slot.  */

#define INSN_UNCOND_BRANCH_DELAY    0x00020000

/* Instruction has conditional branch delay slot.  */

#define INSN_COND_BRANCH_DELAY      0x00040000

/* Conditional branch likely: if branch not taken, insn nullified.  */

#define INSN_COND_BRANCH_LIKELY            0x00080000

/* Moves to coprocessor register, requiring delay.  */

#define INSN_COPROC_MOVE_DELAY      0x00100000

/* Loads coprocessor register from memory, requiring delay.  */

#define INSN_COPROC_MEMORY_DELAY    0x00200000

/* Reads the HI register.  */

#define INSN_READ_HI                    0x00400000

/* Reads the LO register.  */

#define INSN_READ_LO                    0x00800000

/* Modifies the HI register.  */

#define INSN_WRITE_HI                    0x01000000

/* Modifies the LO register.  */

#define INSN_WRITE_LO                    0x02000000

/* Takes a trap (easier to keep out of delay slot).  */

#define INSN_TRAP                   0x04000000

/* Instruction stores value into memory.  */

#define INSN_STORE_MEMORY            0x08000000

/* Instruction uses single precision floating point.  */

#define FP_S                            0x10000000

/* Instruction uses double precision floating point.  */

#define FP_D                            0x20000000

/* Instruction is part of the tx39's integer multiply family.    */

#define INSN_MULT                   0x40000000

/* Instruction synchronize shared memory.  */

#define INSN_SYNC                    0x80000000

/* These are the bits which may be set in the pinfo2 field of an

   instruction. */

/* Instruction is a simple alias (I.E. "move" for daddu/addu/or) */

#define        INSN2_ALIAS                    0x00000001

/* Instruction reads MDMX accumulator. */

#define INSN2_READ_MDMX_ACC            0x00000002

/* Instruction writes MDMX accumulator. */

#define INSN2_WRITE_MDMX_ACC            0x00000004

/* Instruction is actually a macro.  It should be ignored by the

   disassembler, and requires special treatment by the assembler.  */

#define INSN_MACRO                  0xffffffff

/* Masks used to mark instructions to indicate which MIPS ISA level

   they were introduced in.  ISAs, as defined below, are logical

   ORs of these bits, indicating that they support the instructions

   defined at the given level.  */

#define INSN_ISA_MASK                  0x00000fff

#define INSN_ISA1                 0x00000001

#define INSN_ISA2                 0x00000002

#define INSN_ISA3                 0x00000004

#define INSN_ISA4                 0x00000008

#define INSN_ISA5                 0x00000010

#define INSN_ISA32                0x00000020

#define INSN_ISA64                0x00000040

#define INSN_ISA32R2              0x00000080

#define INSN_ISA64R2              0x00000100

/* Masks used for MIPS-defined ASEs.  */

#define INSN_ASE_MASK                  0x0000f000

/* DSP ASE */

#define INSN_DSP                  0x00001000

#define INSN_DSP64                0x00002000

/* MIPS 16 ASE */

#define INSN_MIPS16               0x00004000

/* MIPS-3D ASE */

#define INSN_MIPS3D               0x00008000

/* Chip specific instructions.  These are bitmasks.  */

/* MIPS R4650 instruction.  */

#define INSN_4650                 0x00010000

/* LSI R4010 instruction.  */

#define INSN_4010                 0x00020000

/* NEC VR4100 instruction.  */

#define INSN_4100                 0x00040000

/* Toshiba R3900 instruction.  */

#define INSN_3900                 0x00080000

/* MIPS R10000 instruction.  */

#define INSN_10000                0x00100000

/* Broadcom SB-1 instruction.  */

#define INSN_SB1                  0x00200000

/* NEC VR4111/VR4181 instruction.  */

#define INSN_4111                 0x00400000

/* NEC VR4120 instruction.  */

#define INSN_4120                 0x00800000

/* NEC VR5400 instruction.  */

#define INSN_5400                  0x01000000

/* NEC VR5500 instruction.  */

#define INSN_5500                  0x02000000

/* MDMX ASE */

#define INSN_MDMX                 0x04000000

/* MT ASE */

#define INSN_MT                   0x08000000

/* SmartMIPS ASE  */

#define INSN_SMARTMIPS            0x10000000

/* DSP R2 ASE  */

#define INSN_DSPR2                0x20000000

/* MIPS ISA defines, use instead of hardcoding ISA level.  */

#define       ISA_UNKNOWN     0               /* Gas internal use.  */

#define       ISA_MIPS1       (INSN_ISA1)

#define       ISA_MIPS2       (ISA_MIPS1 | INSN_ISA2)

#define       ISA_MIPS3       (ISA_MIPS2 | INSN_ISA3)

#define       ISA_MIPS4       (ISA_MIPS3 | INSN_ISA4)

#define       ISA_MIPS5       (ISA_MIPS4 | INSN_ISA5)

#define       ISA_MIPS32      (ISA_MIPS2 | INSN_ISA32)

#define       ISA_MIPS64      (ISA_MIPS5 | INSN_ISA32 | INSN_ISA64)

#define       ISA_MIPS32R2    (ISA_MIPS32 | INSN_ISA32R2)

#define       ISA_MIPS64R2    (ISA_MIPS64 | INSN_ISA32R2 | INSN_ISA64R2)

/* CPU defines, use instead of hardcoding processor number. Keep this

   in sync with bfd/archures.c in order for machine selection to work.  */

#define CPU_UNKNOWN        0               /* Gas internal use.  */

#define CPU_R3000        3000

#define CPU_R3900        3900

#define CPU_R4000        4000

#define CPU_R4010        4010

#define CPU_VR4100        4100

#define CPU_R4111        4111

#define CPU_VR4120        4120

#define CPU_R4300        4300

#define CPU_R4400        4400

#define CPU_R4600        4600

#define CPU_R4650        4650

#define CPU_R5000        5000

#define CPU_VR5400        5400

#define CPU_VR5500        5500

#define CPU_R6000        6000

#define CPU_RM7000        7000

#define CPU_R8000        8000

#define CPU_R10000        10000

#define CPU_R12000        12000

#define CPU_MIPS16        16

#define CPU_MIPS32        32

#define CPU_MIPS32R2        33

#define CPU_MIPS5       5

#define CPU_MIPS64      64

#define CPU_MIPS64R2        65

#define CPU_SB1         12310201        /* octal 'SB', 01.  */

/* Test for membership in an ISA including chip specific ISAs.  INSN

   is pointer to an element of the opcode table; ISA is the specified

   ISA/ASE bitmask to test against; and CPU is the CPU specific ISA to

   test, or zero if no CPU specific ISA test is desired.  */

#if 0

#define OPCODE_IS_MEMBER(insn, isa, cpu)                                \

    (((insn)->membership & isa) != 0                                        \

     || (cpu == CPU_R4650 && ((insn)->membership & INSN_4650) != 0)        \

     || (cpu == CPU_RM7000 && ((insn)->membership & INSN_4650) != 0)        \

     || (cpu == CPU_RM9000 && ((insn)->membership & INSN_4650) != 0)        \

     || (cpu == CPU_R4010 && ((insn)->membership & INSN_4010) != 0)        \

     || (cpu == CPU_VR4100 && ((insn)->membership & INSN_4100) != 0)        \

     || (cpu == CPU_R3900 && ((insn)->membership & INSN_3900) != 0)        \

     || ((cpu == CPU_R10000 || cpu == CPU_R12000)                        \

         && ((insn)->membership & INSN_10000) != 0)                        \

     || (cpu == CPU_SB1 && ((insn)->membership & INSN_SB1) != 0)        \

     || (cpu == CPU_R4111 && ((insn)->membership & INSN_4111) != 0)        \

     || (cpu == CPU_VR4120 && ((insn)->membership & INSN_4120) != 0)        \

     || (cpu == CPU_VR5400 && ((insn)->membership & INSN_5400) != 0)        \

     || (cpu == CPU_VR5500 && ((insn)->membership & INSN_5500) != 0)        \

     || 0)        /* Please keep this term for easier source merging.  */

#else

#define OPCODE_IS_MEMBER(insn, isa, cpu)                               \

    (1 != 0)

#endif

/* This is a list of macro expanded instructions.

   _I appended means immediate

   _A appended means address

   _AB appended means address with base register

   _D appended means 64 bit floating point constant

   _S appended means 32 bit floating point constant.  */

enum

{

  M_ABS,

  M_ADD_I,

  M_ADDU_I,

  M_AND_I,

  M_BALIGN,

  M_BEQ,

  M_BEQ_I,

  M_BEQL_I,

  M_BGE,

  M_BGEL,

  M_BGE_I,

  M_BGEL_I,

  M_BGEU,

  M_BGEUL,

  M_BGEU_I,

  M_BGEUL_I,

  M_BGT,

  M_BGTL,

  M_BGT_I,

  M_BGTL_I,

  M_BGTU,

  M_BGTUL,

  M_BGTU_I,

  M_BGTUL_I,

  M_BLE,

  M_BLEL,

  M_BLE_I,

  M_BLEL_I,

  M_BLEU,

  M_BLEUL,

  M_BLEU_I,

  M_BLEUL_I,

  M_BLT,

  M_BLTL,

  M_BLT_I,

  M_BLTL_I,

  M_BLTU,

  M_BLTUL,

  M_BLTU_I,

  M_BLTUL_I,

  M_BNE,

  M_BNE_I,

  M_BNEL_I,

  M_CACHE_AB,

  M_DABS,

  M_DADD_I,

  M_DADDU_I,

  M_DDIV_3,

  M_DDIV_3I,

  M_DDIVU_3,

  M_DDIVU_3I,

  M_DEXT,

  M_DINS,

  M_DIV_3,

  M_DIV_3I,

  M_DIVU_3,

  M_DIVU_3I,

  M_DLA_AB,

  M_DLCA_AB,

  M_DLI,

  M_DMUL,

  M_DMUL_I,

  M_DMULO,

  M_DMULO_I,

  M_DMULOU,

  M_DMULOU_I,

  M_DREM_3,

  M_DREM_3I,

  M_DREMU_3,

  M_DREMU_3I,

  M_DSUB_I,

  M_DSUBU_I,

  M_DSUBU_I_2,

  M_J_A,

  M_JAL_1,

  M_JAL_2,

  M_JAL_A,

  M_L_DOB,

  M_L_DAB,

  M_LA_AB,

  M_LB_A,

  M_LB_AB,

  M_LBU_A,

  M_LBU_AB,

  M_LCA_AB,

  M_LD_A,

  M_LD_OB,

  M_LD_AB,

  M_LDC1_AB,

  M_LDC2_AB,

  M_LDC3_AB,

  M_LDL_AB,

  M_LDR_AB,

  M_LH_A,

  M_LH_AB,

  M_LHU_A,

  M_LHU_AB,

  M_LI,

  M_LI_D,

  M_LI_DD,

  M_LI_S,

  M_LI_SS,

  M_LL_AB,

  M_LLD_AB,

  M_LS_A,

  M_LW_A,

  M_LW_AB,

  M_LWC0_A,

  M_LWC0_AB,

  M_LWC1_A,

  M_LWC1_AB,

  M_LWC2_A,

  M_LWC2_AB,

  M_LWC3_A,

  M_LWC3_AB,

  M_LWL_A,

  M_LWL_AB,

  M_LWR_A,

  M_LWR_AB,

  M_LWU_AB,

  M_MOVE,

  M_MUL,

  M_MUL_I,

  M_MULO,

  M_MULO_I,

  M_MULOU,

  M_MULOU_I,

  M_NOR_I,

  M_OR_I,

  M_REM_3,

  M_REM_3I,

  M_REMU_3,

  M_REMU_3I,

  M_DROL,

  M_ROL,

  M_DROL_I,

  M_ROL_I,

  M_DROR,

  M_ROR,

  M_DROR_I,

  M_ROR_I,

  M_S_DA,

  M_S_DOB,

  M_S_DAB,

  M_S_S,

  M_SC_AB,

  M_SCD_AB,

  M_SD_A,

  M_SD_OB,

  M_SD_AB,

  M_SDC1_AB,

  M_SDC2_AB,

  M_SDC3_AB,

  M_SDL_AB,

  M_SDR_AB,

  M_SEQ,

  M_SEQ_I,

  M_SGE,

  M_SGE_I,

  M_SGEU,

  M_SGEU_I,

  M_SGT,

  M_SGT_I,

  M_SGTU,

  M_SGTU_I,

  M_SLE,

  M_SLE_I,

  M_SLEU,

  M_SLEU_I,

  M_SLT_I,

  M_SLTU_I,

  M_SNE,

  M_SNE_I,

  M_SB_A,

  M_SB_AB,

  M_SH_A,

  M_SH_AB,

  M_SW_A,

  M_SW_AB,

  M_SWC0_A,

  M_SWC0_AB,

  M_SWC1_A,

  M_SWC1_AB,

  M_SWC2_A,

  M_SWC2_AB,

  M_SWC3_A,

  M_SWC3_AB,

  M_SWL_A,

  M_SWL_AB,

  M_SWR_A,

  M_SWR_AB,

  M_SUB_I,

  M_SUBU_I,

  M_SUBU_I_2,

  M_TEQ_I,

  M_TGE_I,

  M_TGEU_I,

  M_TLT_I,

  M_TLTU_I,

  M_TNE_I,

  M_TRUNCWD,

  M_TRUNCWS,

  M_ULD,

  M_ULD_A,

  M_ULH,

  M_ULH_A,

  M_ULHU,

  M_ULHU_A,

  M_ULW,

  M_ULW_A,

  M_USH,

  M_USH_A,

  M_USW,

  M_USW_A,

  M_USD,

  M_USD_A,

  M_XOR_I,

  M_COP0,

  M_COP1,

  M_COP2,

  M_COP3,

  M_NUM_MACROS

};

/* The order of overloaded instructions matters.  Label arguments and

   register arguments look the same. Instructions that can have either

   for arguments must apear in the correct order in this table for the

   assembler to pick the right one. In other words, entries with

   immediate operands must apear after the same instruction with

   registers.

   Many instructions are short hand for other instructions (i.e., The

   jal <register> instruction is short for jalr <register>).  */

extern const struct mips_opcode mips_builtin_opcodes[];

extern const int bfd_mips_num_builtin_opcodes;

extern struct mips_opcode *mips_opcodes;

extern int bfd_mips_num_opcodes;

#define NUMOPCODES bfd_mips_num_opcodes

/* The rest of this file adds definitions for the mips16 TinyRISC

   processor.  */

/* These are the bitmasks and shift counts used for the different

   fields in the instruction formats.  Other than OP, no masks are

   provided for the fixed portions of an instruction, since they are

   not needed.

   The I format uses IMM11.

   The RI format uses RX and IMM8.

   The RR format uses RX, and RY.

   The RRI format uses RX, RY, and IMM5.

   The RRR format uses RX, RY, and RZ.

   The RRI_A format uses RX, RY, and IMM4.

   The SHIFT format uses RX, RY, and SHAMT.

   The I8 format uses IMM8.

   The I8_MOVR32 format uses RY and REGR32.

   The IR_MOV32R format uses REG32R and MOV32Z.

   The I64 format uses IMM8.

   The RI64 format uses RY and IMM5.

   */

#define MIPS16OP_MASK_OP        0x1f

#define MIPS16OP_SH_OP                11

#define MIPS16OP_MASK_IMM11        0x7ff

#define MIPS16OP_SH_IMM11        0

#define MIPS16OP_MASK_RX        0x7

#define MIPS16OP_SH_RX                8

#define MIPS16OP_MASK_IMM8        0xff

#define MIPS16OP_SH_IMM8        0

#define MIPS16OP_MASK_RY        0x7

#define MIPS16OP_SH_RY                5

#define MIPS16OP_MASK_IMM5        0x1f

#define MIPS16OP_SH_IMM5        0

#define MIPS16OP_MASK_RZ        0x7

#define MIPS16OP_SH_RZ                2

#define MIPS16OP_MASK_IMM4        0xf

#define MIPS16OP_SH_IMM4        0

#define MIPS16OP_MASK_REGR32        0x1f

#define MIPS16OP_SH_REGR32        0

#define MIPS16OP_MASK_REG32R        0x1f

#define MIPS16OP_SH_REG32R        3

#define MIPS16OP_EXTRACT_REG32R(i) ((((i) >> 5) & 7) | ((i) & 0x18))

#define MIPS16OP_MASK_MOVE32Z        0x7

#define MIPS16OP_SH_MOVE32Z        0

#define MIPS16OP_MASK_IMM6        0x3f

#define MIPS16OP_SH_IMM6        5

/* These are the characters which may appears in the args field of an

   instruction.  They appear in the order in which the fields appear

   when the instruction is used.  Commas and parentheses in the args

   string are ignored when assembling, and written into the output

   when disassembling.

   "y" 3 bit register (MIPS16OP_*_RY)

   "x" 3 bit register (MIPS16OP_*_RX)

   "z" 3 bit register (MIPS16OP_*_RZ)

   "Z" 3 bit register (MIPS16OP_*_MOVE32Z)

   "v" 3 bit same register as source and destination (MIPS16OP_*_RX)

   "w" 3 bit same register as source and destination (MIPS16OP_*_RY)

   "0" zero register ($0)

   "S" stack pointer ($sp or $29)

   "P" program counter

   "R" return address register ($ra or $31)

   "X" 5 bit MIPS register (MIPS16OP_*_REGR32)

   "Y" 5 bit MIPS register (MIPS16OP_*_REG32R)

   "6" 6 bit unsigned break code (MIPS16OP_*_IMM6)

   "a" 26 bit jump address

   "e" 11 bit extension value

   "l" register list for entry instruction

   "L" register list for exit instruction

   The remaining codes may be extended.  Except as otherwise noted,

   the full extended operand is a 16 bit signed value.

   "<" 3 bit unsigned shift count * 0 (MIPS16OP_*_RZ) (full 5 bit unsigned)

   ">" 3 bit unsigned shift count * 0 (MIPS16OP_*_RX) (full 5 bit unsigned)

   "[" 3 bit unsigned shift count * 0 (MIPS16OP_*_RZ) (full 6 bit unsigned)

   "]" 3 bit unsigned shift count * 0 (MIPS16OP_*_RX) (full 6 bit unsigned)

   "4" 4 bit signed immediate * 0 (MIPS16OP_*_IMM4) (full 15 bit signed)

   "5" 5 bit unsigned immediate * 0 (MIPS16OP_*_IMM5)

   "H" 5 bit unsigned immediate * 2 (MIPS16OP_*_IMM5)

   "W" 5 bit unsigned immediate * 4 (MIPS16OP_*_IMM5)

   "D" 5 bit unsigned immediate * 8 (MIPS16OP_*_IMM5)

   "j" 5 bit signed immediate * 0 (MIPS16OP_*_IMM5)

   "8" 8 bit unsigned immediate * 0 (MIPS16OP_*_IMM8)

   "V" 8 bit unsigned immediate * 4 (MIPS16OP_*_IMM8)

   "C" 8 bit unsigned immediate * 8 (MIPS16OP_*_IMM8)

   "U" 8 bit unsigned immediate * 0 (MIPS16OP_*_IMM8) (full 16 bit unsigned)

   "k" 8 bit signed immediate * 0 (MIPS16OP_*_IMM8)

   "K" 8 bit signed immediate * 8 (MIPS16OP_*_IMM8)

   "p" 8 bit conditional branch address (MIPS16OP_*_IMM8)

   "q" 11 bit branch address (MIPS16OP_*_IMM11)

   "A" 8 bit PC relative address * 4 (MIPS16OP_*_IMM8)

   "B" 5 bit PC relative address * 8 (MIPS16OP_*_IMM5)

   "E" 5 bit PC relative address * 4 (MIPS16OP_*_IMM5)

   */

/* Save/restore encoding for the args field when all 4 registers are

   either saved as arguments or saved/restored as statics.  */

#define MIPS16_ALL_ARGS    0xe

#define MIPS16_ALL_STATICS 0xb

/* For the mips16, we use the same opcode table format and a few of

   the same flags.  However, most of the flags are different.  */

/* Modifies the register in MIPS16OP_*_RX.  */

#define MIPS16_INSN_WRITE_X                    0x00000001

/* Modifies the register in MIPS16OP_*_RY.  */

#define MIPS16_INSN_WRITE_Y                    0x00000002

/* Modifies the register in MIPS16OP_*_RZ.  */

#define MIPS16_INSN_WRITE_Z                    0x00000004

/* Modifies the T ($24) register.  */

#define MIPS16_INSN_WRITE_T                    0x00000008

/* Modifies the SP ($29) register.  */

#define MIPS16_INSN_WRITE_SP                    0x00000010

/* Modifies the RA ($31) register.  */

#define MIPS16_INSN_WRITE_31                    0x00000020

/* Modifies the general purpose register in MIPS16OP_*_REG32R.  */

#define MIPS16_INSN_WRITE_GPR_Y                    0x00000040

/* Reads the register in MIPS16OP_*_RX.  */

#define MIPS16_INSN_READ_X                    0x00000080

/* Reads the register in MIPS16OP_*_RY.  */

#define MIPS16_INSN_READ_Y                    0x00000100

/* Reads the register in MIPS16OP_*_MOVE32Z.  */

#define MIPS16_INSN_READ_Z                    0x00000200

/* Reads the T ($24) register.  */

#define MIPS16_INSN_READ_T                    0x00000400

/* Reads the SP ($29) register.  */

#define MIPS16_INSN_READ_SP                    0x00000800

/* Reads the RA ($31) register.  */

#define MIPS16_INSN_READ_31                    0x00001000

/* Reads the program counter.  */

#define MIPS16_INSN_READ_PC                    0x00002000

/* Reads the general purpose register in MIPS16OP_*_REGR32.  */

#define MIPS16_INSN_READ_GPR_X                    0x00004000

/* Is a branch insn. */

#define MIPS16_INSN_BRANCH                  0x00010000

/* The following flags have the same value for the mips16 opcode

   table:

   INSN_UNCOND_BRANCH_DELAY

   INSN_COND_BRANCH_DELAY

   INSN_COND_BRANCH_LIKELY (never used)

   INSN_READ_HI

   INSN_READ_LO

   INSN_WRITE_HI

   INSN_WRITE_LO

   INSN_TRAP

   INSN_ISA3

   */

extern const struct mips_opcode mips16_opcodes[];

extern const int bfd_mips16_num_opcodes;

/* Short hand so the lines aren't too long.  */

#define LDD     INSN_LOAD_MEMORY_DELAY

#define LCD        INSN_LOAD_COPROC_DELAY

#define UBD     INSN_UNCOND_BRANCH_DELAY

#define CBD        INSN_COND_BRANCH_DELAY

#define COD     INSN_COPROC_MOVE_DELAY

#define CLD        INSN_COPROC_MEMORY_DELAY

#define CBL        INSN_COND_BRANCH_LIKELY

#define TRAP        INSN_TRAP

#define SM        INSN_STORE_MEMORY

#define WR_d    INSN_WRITE_GPR_D

#define WR_t    INSN_WRITE_GPR_T

#define WR_31   INSN_WRITE_GPR_31

#define WR_D    INSN_WRITE_FPR_D

#define WR_T        INSN_WRITE_FPR_T

#define WR_S        INSN_WRITE_FPR_S

#define RD_s    INSN_READ_GPR_S

#define RD_b    INSN_READ_GPR_S

#define RD_t    INSN_READ_GPR_T

#define RD_S    INSN_READ_FPR_S

#define RD_T    INSN_READ_FPR_T

#define RD_R        INSN_READ_FPR_R

#define WR_CC        INSN_WRITE_COND_CODE

#define RD_CC        INSN_READ_COND_CODE

#define RD_C0   INSN_COP

#define RD_C1        INSN_COP

#define RD_C2   INSN_COP

#define RD_C3   INSN_COP

#define WR_C0   INSN_COP

#define WR_C1        INSN_COP

#define WR_C2   INSN_COP

#define WR_C3   INSN_COP

#define WR_HI        INSN_WRITE_HI

#define RD_HI        INSN_READ_HI

#define MOD_HI  WR_HI|RD_HI

#define WR_LO        INSN_WRITE_LO

#define RD_LO        INSN_READ_LO

#define MOD_LO  WR_LO|RD_LO

#define WR_HILO WR_HI|WR_LO

#define RD_HILO RD_HI|RD_LO

#define MOD_HILO WR_HILO|RD_HILO

#define IS_M    INSN_MULT

#define WR_MACC INSN2_WRITE_MDMX_ACC

#define RD_MACC INSN2_READ_MDMX_ACC

#define I1        INSN_ISA1

#define I2        INSN_ISA2

#define I3        INSN_ISA3

#define I4        INSN_ISA4

#define I5        INSN_ISA5

#define I32        INSN_ISA32

#define I64     INSN_ISA64

#define I33        INSN_ISA32R2

#define I65        INSN_ISA64R2

/* MIPS64 MIPS-3D ASE support.  */

#define I16     INSN_MIPS16

/* MIPS32 SmartMIPS ASE support.  */

#define SMT        INSN_SMARTMIPS

/* MIPS64 MIPS-3D ASE support.  */

#define M3D     INSN_MIPS3D

/* MIPS64 MDMX ASE support.  */

#define MX      INSN_MDMX

#define P3        INSN_4650

#define L1        INSN_4010

#define V1        (INSN_4100 | INSN_4111 | INSN_4120)

#define T3      INSN_3900

#define M1        INSN_10000

#define SB1     INSN_SB1

#define N411        INSN_4111

#define N412        INSN_4120

#define N5        (INSN_5400 | INSN_5500)

#define N54        INSN_5400

#define N55        INSN_5500

#define G1      (T3             \

                 )

#define G2      (T3             \

                 )

#define G3      (I4             \

                 )

/* MIPS DSP ASE support.

   NOTE:

   1. MIPS DSP ASE includes 4 accumulators ($ac0 - $ac3).  $ac0 is the pair

   of original HI and LO.  $ac1, $ac2 and $ac3 are new registers, and have

   the same structure as $ac0 (HI + LO).  For DSP instructions that write or

   read accumulators (that may be $ac0), we add WR_a (WR_HILO) or RD_a

   (RD_HILO) attributes, such that HILO dependencies are maintained

   conservatively.

   2. For some mul. instructions that use integer registers as destinations

   but destroy HI+LO as side-effect, we add WR_HILO to their attributes.

   3. MIPS DSP ASE includes a new DSP control register, which has 6 fields

   (ccond, outflag, EFI, c, scount, pos).  Many DSP instructions read or write

   certain fields of the DSP control register.  For simplicity, we decide not

   to track dependencies of these fields.

   However, "bposge32" is a branch instruction that depends on the "pos"

   field.  In order to make sure that GAS does not reorder DSP instructions

   that writes the "pos" field and "bposge32", we add DSP_VOLA (INSN_TRAP)

   attribute to those instructions that write the "pos" field.  */

#define WR_a        WR_HILO        /* Write dsp accumulators (reuse WR_HILO)  */

#define RD_a        RD_HILO        /* Read dsp accumulators (reuse RD_HILO)  */

#define MOD_a        WR_a|RD_a

#define DSP_VOLA        INSN_TRAP

#define D32        INSN_DSP

#define D33        INSN_DSPR2

#define D64        INSN_DSP64

/* MIPS MT ASE support.  */

#define MT32        INSN_MT

/* The order of overloaded instructions matters.  Label arguments and

   register arguments look the same. Instructions that can have either

   for arguments must apear in the correct order in this table for the

   assembler to pick the right one. In other words, entries with

   immediate operands must apear after the same instruction with

   registers.

   Because of the lookup algorithm used, entries with the same opcode

   name must be contiguous.

   Many instructions are short hand for other instructions (i.e., The

   jal <register> instruction is short for jalr <register>).  */

const struct mips_opcode mips_builtin_opcodes[] =

{

/* These instructions appear first so that the disassembler will find

   them first.  The assemblers uses a hash table based on the

   instruction name anyhow.  */

/* name,    args,        match,            mask,        pinfo,                  membership */

{"pref",    "k,o(b)",   0xcc000000, 0xfc000000, RD_b,                   0,                I4|I32|G3        },

{"prefx",   "h,t(b)",        0x4c00000f, 0xfc0007ff, RD_b|RD_t,                0,                I4|I33        },

{"nop",     "",         0x00000000, 0xffffffff, 0,                      INSN2_ALIAS,        I1      }, /* sll */

{"ssnop",   "",         0x00000040, 0xffffffff, 0,                      INSN2_ALIAS,        I32|N55        }, /* sll */

{"ehb",     "",         0x000000c0, 0xffffffff, 0,                      INSN2_ALIAS,        I33        }, /* sll */

{"li",      "t,j",      0x24000000, 0xffe00000, WR_t,                        INSN2_ALIAS,        I1        }, /* addiu */

{"li",            "t,i",        0x34000000, 0xffe00000, WR_t,                        INSN2_ALIAS,        I1        }, /* ori */

{"li",      "t,I",        0,    (int) M_LI,        INSN_MACRO,                0,                I1        },

{"move",    "d,s",        0,    (int) M_MOVE,        INSN_MACRO,                0,                I1        },

{"move",    "d,s",        0x0000002d, 0xfc1f07ff, WR_d|RD_s,                INSN2_ALIAS,        I3        },/* daddu */

{"move",    "d,s",        0x00000021, 0xfc1f07ff, WR_d|RD_s,                INSN2_ALIAS,        I1        },/* addu */

{"move",    "d,s",        0x00000025, 0xfc1f07ff,        WR_d|RD_s,                INSN2_ALIAS,        I1        },/* or */

{"b",       "p",        0x10000000, 0xffff0000,        UBD,                        INSN2_ALIAS,        I1        },/* beq 0,0 */

{"b",       "p",        0x04010000, 0xffff0000,        UBD,                        INSN2_ALIAS,        I1        },/* bgez 0 */

{"bal",     "p",        0x04110000, 0xffff0000,        UBD|WR_31,                INSN2_ALIAS,        I1        },/* bgezal 0*/

{"abs",     "d,v",        0,    (int) M_ABS,        INSN_MACRO,                0,                I1        },

{"abs.s",   "D,V",        0x46000005, 0xffff003f,        WR_D|RD_S|FP_S,                0,                I1        },

{"abs.d",   "D,V",        0x46200005, 0xffff003f,        WR_D|RD_S|FP_D,                0,                I1        },

{"abs.ps",  "D,V",        0x46c00005, 0xffff003f,        WR_D|RD_S|FP_D,                0,                I5|I33        },

{"add",     "d,v,t",        0x00000020, 0xfc0007ff,        WR_d|RD_s|RD_t,                0,                I1        },

{"add",     "t,r,I",        0,    (int) M_ADD_I,        INSN_MACRO,                0,                I1        },

{"add.s",   "D,V,T",        0x46000000, 0xffe0003f,        WR_D|RD_S|RD_T|FP_S,        0,                I1        },

{"add.d",   "D,V,T",        0x46200000, 0xffe0003f,        WR_D|RD_S|RD_T|FP_D,        0,                I1        },

{"add.ob",  "X,Y,Q",        0x7800000b, 0xfc20003f,        WR_D|RD_S|RD_T|FP_D,        0,                MX|SB1        },

{"add.ob",  "D,S,T",        0x4ac0000b, 0xffe0003f,        WR_D|RD_S|RD_T,                0,                N54        },

{"add.ob",  "D,S,T[e]",        0x4800000b, 0xfe20003f,        WR_D|RD_S|RD_T,                0,                N54        },

{"add.ob",  "D,S,k",        0x4bc0000b, 0xffe0003f,        WR_D|RD_S|RD_T,                0,                N54        },

{"add.ps",  "D,V,T",        0x46c00000, 0xffe0003f,        WR_D|RD_S|RD_T|FP_D,        0,                I5|I33        },

{"add.qh",  "X,Y,Q",        0x7820000b, 0xfc20003f,        WR_D|RD_S|RD_T|FP_D,        0,                MX        },

{"adda.ob", "Y,Q",        0x78000037, 0xfc2007ff,        RD_S|RD_T|FP_D,                WR_MACC,        MX|SB1        },

{"adda.qh", "Y,Q",        0x78200037, 0xfc2007ff,        RD_S|RD_T|FP_D,                WR_MACC,        MX        },

{"addi",    "t,r,j",        0x20000000, 0xfc000000,        WR_t|RD_s,                0,                I1        },

{"addiu",   "t,r,j",        0x24000000, 0xfc000000,        WR_t|RD_s,                0,                I1        },