Archipelago » qemu

HXCOMM Use DEFHEADING() to define headings in both help text and texi

HXCOMM Text between STEXI and ETEXI are copied to texi version and

HXCOMM discarded from C version

HXCOMM DEF(command, args, callback, arg_string, help) is used to construct

HXCOMM monitor commands

HXCOMM HXCOMM can be used for comments, discarded from both texi and C

STEXI

@table @option

ETEXI

    {

        .name       = "help|?",

        .args_type  = "name:s?",

        .params     = "[cmd]",

        .help       = "show the help",

        .mhandler.cmd = do_help_cmd,

    },

STEXI

@item help or ? [@var{cmd}]

@findex help

Show the help for all commands or just for command @var{cmd}.

ETEXI

    {

        .name       = "commit",

        .args_type  = "device:B",

        .params     = "device|all",

        .help       = "commit changes to the disk images (if -snapshot is used) or backing files",

        .mhandler.cmd = do_commit,

    },

STEXI

@item commit

@findex commit

Commit changes to the disk images (if -snapshot is used) or backing files.

ETEXI

    {

        .name       = "q|quit",

        .args_type  = "",

        .params     = "",

        .help       = "quit the emulator",

        .user_print = monitor_user_noop,

        .mhandler.cmd = hmp_quit,

    },

STEXI

@item q or quit

@findex quit

Quit the emulator.

ETEXI

    {

        .name       = "block_resize",

        .args_type  = "device:B,size:o",

        .params     = "device size",

        .help       = "resize a block image",

        .mhandler.cmd = hmp_block_resize,

    },

STEXI

@item block_resize

@findex block_resize

Resize a block image while a guest is running.  Usually requires guest

action to see the updated size.  Resize to a lower size is supported,

but should be used with extreme caution.  Note that this command only

resizes image files, it can not resize block devices like LVM volumes.

ETEXI

    {

        .name       = "block_stream",

        .args_type  = "device:B,base:s?",

        .params     = "device [base]",

        .help       = "copy data from a backing file into a block device",

        .mhandler.cmd = hmp_block_stream,

    },

STEXI

@item block_stream

@findex block_stream

Copy data from a backing file into a block device.

ETEXI

    {

        .name       = "block_job_set_speed",

        .args_type  = "device:B,value:o",

        .params     = "device value",

        .help       = "set maximum speed for a background block operation",

        .mhandler.cmd = hmp_block_job_set_speed,

    },

STEXI

@item block_job_set_stream

@findex block_job_set_stream

Set maximum speed for a background block operation.

ETEXI

    {

        .name       = "block_job_cancel",

        .args_type  = "device:B",

        .params     = "device",

        .help       = "stop an active block streaming operation",

        .mhandler.cmd = hmp_block_job_cancel,

    },

STEXI

@item block_job_cancel

@findex block_job_cancel

Stop an active block streaming operation.

ETEXI

    {

        .name       = "eject",

        .args_type  = "force:-f,device:B",

        .params     = "[-f] device",

        .help       = "eject a removable medium (use -f to force it)",

        .mhandler.cmd = hmp_eject,

    },

STEXI

@item eject [-f] @var{device}

@findex eject

Eject a removable medium (use -f to force it).

ETEXI

    {

        .name       = "drive_del",

        .args_type  = "id:s",

        .params     = "device",

        .help       = "remove host block device",

        .user_print = monitor_user_noop,

        .mhandler.cmd_new = do_drive_del,

    },

STEXI

@item drive_del @var{device}

@findex drive_del

Remove host block device.  The result is that guest generated IO is no longer

submitted against the host device underlying the disk.  Once a drive has

been deleted, the QEMU Block layer returns -EIO which results in IO

errors in the guest for applications that are reading/writing to the device.

ETEXI

    {

        .name       = "change",

        .args_type  = "device:B,target:F,arg:s?",

        .params     = "device filename [format]",

        .help       = "change a removable medium, optional format",

        .mhandler.cmd = hmp_change,

    },

STEXI

@item change @var{device} @var{setting}

@findex change

Change the configuration of a device.

@table @option

@item change @var{diskdevice} @var{filename} [@var{format}]

Change the medium for a removable disk device to point to @var{filename}. eg

@example

(qemu) change ide1-cd0 /path/to/some.iso

@end example

@var{format} is optional.

@item change vnc @var{display},@var{options}

Change the configuration of the VNC server. The valid syntax for @var{display}

and @var{options} are described at @ref{sec_invocation}. eg

@example

(qemu) change vnc localhost:1

@end example

@item change vnc password [@var{password}]

Change the password associated with the VNC server. If the new password is not

supplied, the monitor will prompt for it to be entered. VNC passwords are only

significant up to 8 letters. eg

@example

(qemu) change vnc password

Password: ********

@end example

@end table

ETEXI

    {

        .name       = "screendump",

        .args_type  = "filename:F",

        .params     = "filename",

        .help       = "save screen into PPM image 'filename'",

        .user_print = monitor_user_noop,

        .mhandler.cmd_new = do_screen_dump,

    },

STEXI

@item screendump @var{filename}

@findex screendump

Save screen into PPM image @var{filename}.

ETEXI

    {

        .name       = "logfile",

        .args_type  = "filename:F",

        .params     = "filename",

        .help       = "output logs to 'filename'",

        .mhandler.cmd = do_logfile,

    },

STEXI

@item logfile @var{filename}

@findex logfile

Output logs to @var{filename}.

ETEXI

    {

        .name       = "trace-event",

        .args_type  = "name:s,option:b",

        .params     = "name on|off",

        .help       = "changes status of a specific trace event",

        .mhandler.cmd = do_trace_event_set_state,

    },

STEXI

@item trace-event

@findex trace-event

changes status of a trace event

ETEXI

#if defined(CONFIG_TRACE_SIMPLE)

    {

        .name       = "trace-file",

        .args_type  = "op:s?,arg:F?",

        .params     = "on|off|flush|set [arg]",

        .help       = "open, close, or flush trace file, or set a new file name",

        .mhandler.cmd = do_trace_file,

    },

STEXI

@item trace-file on|off|flush

@findex trace-file

Open, close, or flush the trace file.  If no argument is given, the status of the trace file is displayed.

ETEXI

#endif

    {

        .name       = "log",

        .args_type  = "items:s",

        .params     = "item1[,...]",

        .help       = "activate logging of the specified items to '/tmp/qemu.log'",

        .mhandler.cmd = do_log,

    },

STEXI

@item log @var{item1}[,...]

@findex log

Activate logging of the specified items to @file{/tmp/qemu.log}.

ETEXI

    {

        .name       = "savevm",

        .args_type  = "name:s?",

        .params     = "[tag|id]",

        .help       = "save a VM snapshot. If no tag or id are provided, a new snapshot is created",

        .mhandler.cmd = do_savevm,

    },

STEXI

@item savevm [@var{tag}|@var{id}]

@findex savevm

Create a snapshot of the whole virtual machine. If @var{tag} is

provided, it is used as human readable identifier. If there is already

a snapshot with the same tag or ID, it is replaced. More info at

@ref{vm_snapshots}.

ETEXI

    {

        .name       = "loadvm",

        .args_type  = "name:s",

        .params     = "tag|id",

        .help       = "restore a VM snapshot from its tag or id",

        .mhandler.cmd = do_loadvm,

    },

STEXI

@item loadvm @var{tag}|@var{id}

@findex loadvm

Set the whole virtual machine to the snapshot identified by the tag

@var{tag} or the unique snapshot ID @var{id}.

ETEXI

    {

        .name       = "delvm",

        .args_type  = "name:s",

        .params     = "tag|id",

        .help       = "delete a VM snapshot from its tag or id",

        .mhandler.cmd = do_delvm,

    },

STEXI

@item delvm @var{tag}|@var{id}

@findex delvm

Delete the snapshot identified by @var{tag} or @var{id}.

ETEXI

    {

        .name       = "singlestep",

        .args_type  = "option:s?",

        .params     = "[on|off]",

        .help       = "run emulation in singlestep mode or switch to normal mode",

        .mhandler.cmd = do_singlestep,

    },

STEXI

@item singlestep [off]

@findex singlestep

Run the emulation in single step mode.

If called with option off, the emulation returns to normal mode.

ETEXI

    {

        .name       = "stop",

        .args_type  = "",

        .params     = "",

        .help       = "stop emulation",

        .mhandler.cmd = hmp_stop,

    },

STEXI

@item stop

@findex stop

Stop emulation.

ETEXI

    {

        .name       = "c|cont",

        .args_type  = "",

        .params     = "",

        .help       = "resume emulation",

        .mhandler.cmd = hmp_cont,

    },

STEXI

@item c or cont

@findex cont

Resume emulation.

ETEXI

    {

        .name       = "gdbserver",

        .args_type  = "device:s?",

        .params     = "[device]",

        .help       = "start gdbserver on given device (default 'tcp::1234'), stop with 'none'",

        .mhandler.cmd = do_gdbserver,

    },

STEXI

@item gdbserver [@var{port}]

@findex gdbserver

Start gdbserver session (default @var{port}=1234)

ETEXI

    {

        .name       = "x",

        .args_type  = "fmt:/,addr:l",

        .params     = "/fmt addr",

        .help       = "virtual memory dump starting at 'addr'",

        .mhandler.cmd = do_memory_dump,

    },

STEXI

@item x/fmt @var{addr}

@findex x

Virtual memory dump starting at @var{addr}.

ETEXI

    {

        .name       = "xp",

        .args_type  = "fmt:/,addr:l",

        .params     = "/fmt addr",

        .help       = "physical memory dump starting at 'addr'",

        .mhandler.cmd = do_physical_memory_dump,

    },

STEXI

@item xp /@var{fmt} @var{addr}

@findex xp

Physical memory dump starting at @var{addr}.

@var{fmt} is a format which tells the command how to format the

data. Its syntax is: @option{/@{count@}@{format@}@{size@}}

@table @var

@item count

is the number of items to be dumped.

@item format

can be x (hex), d (signed decimal), u (unsigned decimal), o (octal),

c (char) or i (asm instruction).

@item size

can be b (8 bits), h (16 bits), w (32 bits) or g (64 bits). On x86,

@code{h} or @code{w} can be specified with the @code{i} format to

respectively select 16 or 32 bit code instruction size.

@end table

Examples:

@itemize

@item

Dump 10 instructions at the current instruction pointer:

@example

(qemu) x/10i $eip

0x90107063:  ret

0x90107064:  sti

0x90107065:  lea    0x0(%esi,1),%esi

0x90107069:  lea    0x0(%edi,1),%edi

0x90107070:  ret

0x90107071:  jmp    0x90107080

0x90107073:  nop

0x90107074:  nop

0x90107075:  nop

0x90107076:  nop

@end example

@item

Dump 80 16 bit values at the start of the video memory.

@smallexample

(qemu) xp/80hx 0xb8000

0x000b8000: 0x0b50 0x0b6c 0x0b65 0x0b78 0x0b38 0x0b36 0x0b2f 0x0b42

0x000b8010: 0x0b6f 0x0b63 0x0b68 0x0b73 0x0b20 0x0b56 0x0b47 0x0b41

0x000b8020: 0x0b42 0x0b69 0x0b6f 0x0b73 0x0b20 0x0b63 0x0b75 0x0b72

0x000b8030: 0x0b72 0x0b65 0x0b6e 0x0b74 0x0b2d 0x0b63 0x0b76 0x0b73

0x000b8040: 0x0b20 0x0b30 0x0b35 0x0b20 0x0b4e 0x0b6f 0x0b76 0x0b20

0x000b8050: 0x0b32 0x0b30 0x0b30 0x0b33 0x0720 0x0720 0x0720 0x0720

0x000b8060: 0x0720 0x0720 0x0720 0x0720 0x0720 0x0720 0x0720 0x0720

0x000b8070: 0x0720 0x0720 0x0720 0x0720 0x0720 0x0720 0x0720 0x0720

0x000b8080: 0x0720 0x0720 0x0720 0x0720 0x0720 0x0720 0x0720 0x0720

0x000b8090: 0x0720 0x0720 0x0720 0x0720 0x0720 0x0720 0x0720 0x0720

@end smallexample

@end itemize

ETEXI

    {

        .name       = "p|print",

        .args_type  = "fmt:/,val:l",

        .params     = "/fmt expr",

        .help       = "print expression value (use $reg for CPU register access)",

        .mhandler.cmd = do_print,

    },

STEXI

@item p or print/@var{fmt} @var{expr}

@findex print

Print expression value. Only the @var{format} part of @var{fmt} is

used.

ETEXI

    {

        .name       = "i",

        .args_type  = "fmt:/,addr:i,index:i.",

        .params     = "/fmt addr",

        .help       = "I/O port read",

        .mhandler.cmd = do_ioport_read,

    },

STEXI

Read I/O port.

ETEXI

    {

        .name       = "o",

        .args_type  = "fmt:/,addr:i,val:i",

        .params     = "/fmt addr value",

        .help       = "I/O port write",

        .mhandler.cmd = do_ioport_write,

    },

STEXI

Write to I/O port.

ETEXI

    {

        .name       = "sendkey",

        .args_type  = "string:s,hold_time:i?",

        .params     = "keys [hold_ms]",

        .help       = "send keys to the VM (e.g. 'sendkey ctrl-alt-f1', default hold time=100 ms)",

        .mhandler.cmd = do_sendkey,

    },

STEXI

@item sendkey @var{keys}

@findex sendkey

Send @var{keys} to the emulator. @var{keys} could be the name of the

key or @code{#} followed by the raw value in either decimal or hexadecimal

format. Use @code{-} to press several keys simultaneously. Example:

@example

sendkey ctrl-alt-f1

@end example

This command is useful to send keys that your graphical user interface

intercepts at low level, such as @code{ctrl-alt-f1} in X Window.

ETEXI

    {

        .name       = "system_reset",

        .args_type  = "",

        .params     = "",

        .help       = "reset the system",

        .mhandler.cmd = hmp_system_reset,

    },

STEXI

@item system_reset

@findex system_reset

Reset the system.

ETEXI

    {

        .name       = "system_powerdown",

        .args_type  = "",

        .params     = "",

        .help       = "send system power down event",

        .mhandler.cmd = hmp_system_powerdown,

    },

STEXI

@item system_powerdown

@findex system_powerdown

Power down the system (if supported).

ETEXI

    {

        .name       = "sum",

        .args_type  = "start:i,size:i",

        .params     = "addr size",

        .help       = "compute the checksum of a memory region",

        .mhandler.cmd = do_sum,

    },

STEXI

@item sum @var{addr} @var{size}

@findex sum

Compute the checksum of a memory region.

ETEXI

    {

        .name       = "usb_add",

        .args_type  = "devname:s",

        .params     = "device",

        .help       = "add USB device (e.g. 'host:bus.addr' or 'host:vendor_id:product_id')",

        .mhandler.cmd = do_usb_add,

    },

STEXI

@item usb_add @var{devname}

@findex usb_add

Add the USB device @var{devname}.  For details of available devices see

@ref{usb_devices}

ETEXI

    {

        .name       = "usb_del",

        .args_type  = "devname:s",

        .params     = "device",

        .help       = "remove USB device 'bus.addr'",

        .mhandler.cmd = do_usb_del,

    },

STEXI

@item usb_del @var{devname}

@findex usb_del

Remove the USB device @var{devname} from the QEMU virtual USB

hub. @var{devname} has the syntax @code{bus.addr}. Use the monitor

command @code{info usb} to see the devices you can remove.

ETEXI

    {

        .name       = "device_add",

        .args_type  = "device:O",

        .params     = "driver[,prop=value][,...]",

        .help       = "add device, like -device on the command line",

        .user_print = monitor_user_noop,

        .mhandler.cmd_new = do_device_add,

    },

STEXI

@item device_add @var{config}

@findex device_add

Add device.

ETEXI

    {

        .name       = "device_del",

        .args_type  = "id:s",

        .params     = "device",

        .help       = "remove device",

        .user_print = monitor_user_noop,

        .mhandler.cmd_new = do_device_del,

    },

STEXI

@item device_del @var{id}

@findex device_del

Remove device @var{id}.

ETEXI

    {

        .name       = "cpu",

        .args_type  = "index:i",

        .params     = "index",

        .help       = "set the default CPU",

        .mhandler.cmd = hmp_cpu,

    },

STEXI

@item cpu @var{index}

@findex cpu

Set the default CPU.

ETEXI

    {

        .name       = "mouse_move",

        .args_type  = "dx_str:s,dy_str:s,dz_str:s?",

        .params     = "dx dy [dz]",

        .help       = "send mouse move events",

        .mhandler.cmd = do_mouse_move,

    },

STEXI

@item mouse_move @var{dx} @var{dy} [@var{dz}]

@findex mouse_move

Move the active mouse to the specified coordinates @var{dx} @var{dy}

with optional scroll axis @var{dz}.

ETEXI

    {

        .name       = "mouse_button",

        .args_type  = "button_state:i",

        .params     = "state",

        .help       = "change mouse button state (1=L, 2=M, 4=R)",

        .mhandler.cmd = do_mouse_button,

    },

STEXI

@item mouse_button @var{val}

@findex mouse_button

Change the active mouse button state @var{val} (1=L, 2=M, 4=R).

ETEXI

    {

        .name       = "mouse_set",

        .args_type  = "index:i",

        .params     = "index",

        .help       = "set which mouse device receives events",

        .mhandler.cmd = do_mouse_set,

    },

STEXI

@item mouse_set @var{index}

@findex mouse_set

Set which mouse device receives events at given @var{index}, index

can be obtained with

@example

info mice

@end example

ETEXI

#ifdef HAS_AUDIO

    {

        .name       = "wavcapture",

        .args_type  = "path:F,freq:i?,bits:i?,nchannels:i?",

        .params     = "path [frequency [bits [channels]]]",

        .help       = "capture audio to a wave file (default frequency=44100 bits=16 channels=2)",

        .mhandler.cmd = do_wav_capture,

    },

#endif

STEXI

@item wavcapture @var{filename} [@var{frequency} [@var{bits} [@var{channels}]]]

@findex wavcapture

Capture audio into @var{filename}. Using sample rate @var{frequency}

bits per sample @var{bits} and number of channels @var{channels}.

Defaults:

@itemize @minus

@item Sample rate = 44100 Hz - CD quality

@item Bits = 16

@item Number of channels = 2 - Stereo

@end itemize

ETEXI

#ifdef HAS_AUDIO

    {

        .name       = "stopcapture",

        .args_type  = "n:i",

        .params     = "capture index",

        .help       = "stop capture",

        .mhandler.cmd = do_stop_capture,

    },

#endif

STEXI

@item stopcapture @var{index}

@findex stopcapture

Stop capture with a given @var{index}, index can be obtained with

@example

info capture

@end example

ETEXI

    {

        .name       = "memsave",

        .args_type  = "val:l,size:i,filename:s",

        .params     = "addr size file",

        .help       = "save to disk virtual memory dump starting at 'addr' of size 'size'",

        .mhandler.cmd = hmp_memsave,

    },

STEXI

@item memsave @var{addr} @var{size} @var{file}

@findex memsave

save to disk virtual memory dump starting at @var{addr} of size @var{size}.

ETEXI

    {

        .name       = "pmemsave",

        .args_type  = "val:l,size:i,filename:s",

        .params     = "addr size file",

        .help       = "save to disk physical memory dump starting at 'addr' of size 'size'",

        .mhandler.cmd = hmp_pmemsave,

    },

STEXI

@item pmemsave @var{addr} @var{size} @var{file}

@findex pmemsave

save to disk physical memory dump starting at @var{addr} of size @var{size}.

ETEXI

    {

        .name       = "boot_set",

        .args_type  = "bootdevice:s",

        .params     = "bootdevice",

        .help       = "define new values for the boot device list",

        .mhandler.cmd = do_boot_set,

    },

STEXI

@item boot_set @var{bootdevicelist}

@findex boot_set

Define new values for the boot device list. Those values will override

the values specified on the command line through the @code{-boot} option.

The values that can be specified here depend on the machine type, but are

the same that can be specified in the @code{-boot} command line option.

ETEXI

#if defined(TARGET_I386)

    {

        .name       = "nmi",

        .args_type  = "",

        .params     = "",

        .help       = "inject an NMI on all guest's CPUs",

        .mhandler.cmd = hmp_inject_nmi,

    },

#endif

STEXI

@item nmi @var{cpu}

@findex nmi

Inject an NMI on the given CPU (x86 only).

ETEXI

    {

        .name       = "migrate",

        .args_type  = "detach:-d,blk:-b,inc:-i,uri:s",

        .params     = "[-d] [-b] [-i] uri",

        .help       = "migrate to URI (using -d to not wait for completion)"

		      "\n\t\t\t -b for migration without shared storage with"

		      " full copy of disk\n\t\t\t -i for migration without "

		      "shared storage with incremental copy of disk "

		      "(base image shared between src and destination)",

        .user_print = monitor_user_noop,	

	.mhandler.cmd_new = do_migrate,

    },

STEXI

@item migrate [-d] [-b] [-i] @var{uri}

@findex migrate

Migrate to @var{uri} (using -d to not wait for completion).

	-b for migration with full copy of disk

	-i for migration with incremental copy of disk (base image is shared)

ETEXI

    {

        .name       = "migrate_cancel",

        .args_type  = "",

        .params     = "",

        .help       = "cancel the current VM migration",

        .mhandler.cmd = hmp_migrate_cancel,

    },

STEXI

@item migrate_cancel

@findex migrate_cancel

Cancel the current VM migration.

ETEXI

    {

        .name       = "migrate_set_speed",

        .args_type  = "value:o",

        .params     = "value",

        .help       = "set maximum speed (in bytes) for migrations. "

	"Defaults to MB if no size suffix is specified, ie. B/K/M/G/T",

        .mhandler.cmd = hmp_migrate_set_speed,

    },

STEXI

@item migrate_set_speed @var{value}

@findex migrate_set_speed

Set maximum speed to @var{value} (in bytes) for migrations.

ETEXI

    {

        .name       = "migrate_set_downtime",

        .args_type  = "value:T",

        .params     = "value",

        .help       = "set maximum tolerated downtime (in seconds) for migrations",

        .mhandler.cmd = hmp_migrate_set_downtime,

    },

STEXI

@item migrate_set_downtime @var{second}

@findex migrate_set_downtime

Set maximum tolerated downtime (in seconds) for migration.

ETEXI

    {

        .name       = "client_migrate_info",

        .args_type  = "protocol:s,hostname:s,port:i?,tls-port:i?,cert-subject:s?",

        .params     = "protocol hostname port tls-port cert-subject",

        .help       = "send migration info to spice/vnc client",

        .user_print = monitor_user_noop,

        .mhandler.cmd_async = client_migrate_info,

        .flags      = MONITOR_CMD_ASYNC,

    },

STEXI

@item client_migrate_info @var{protocol} @var{hostname} @var{port} @var{tls-port} @var{cert-subject}

@findex client_migrate_info

Set the spice/vnc connection info for the migration target.  The spice/vnc

server will ask the spice/vnc client to automatically reconnect using the

new parameters (if specified) once the vm migration finished successfully.

ETEXI

    {

        .name       = "snapshot_blkdev",

        .args_type  = "device:B,snapshot-file:s?,format:s?",

        .params     = "device [new-image-file] [format]",

        .help       = "initiates a live snapshot\n\t\t\t"

                      "of device. If a new image file is specified, the\n\t\t\t"

                      "new image file will become the new root image.\n\t\t\t"

                      "If format is specified, the snapshot file will\n\t\t\t"

                      "be created in that format. Otherwise the\n\t\t\t"

                      "snapshot will be internal! (currently unsupported)",

        .mhandler.cmd = hmp_snapshot_blkdev,

    },

STEXI

@item snapshot_blkdev

@findex snapshot_blkdev

Snapshot device, using snapshot file as target if provided

ETEXI

    {

        .name       = "drive_add",

        .args_type  = "pci_addr:s,opts:s",

        .params     = "[[<domain>:]<bus>:]<slot>\n"

                      "[file=file][,if=type][,bus=n]\n"

                      "[,unit=m][,media=d][,index=i]\n"

                      "[,cyls=c,heads=h,secs=s[,trans=t]]\n"

                      "[,snapshot=on|off][,cache=on|off]\n"

                      "[,readonly=on|off][,copy-on-read=on|off]",

        .help       = "add drive to PCI storage controller",

        .mhandler.cmd = drive_hot_add,

    },

STEXI

@item drive_add

@findex drive_add

Add drive to PCI storage controller.

ETEXI

#if defined(TARGET_I386)

    {

        .name       = "pci_add",

        .args_type  = "pci_addr:s,type:s,opts:s?",

        .params     = "auto|[[<domain>:]<bus>:]<slot> nic|storage [[vlan=n][,macaddr=addr][,model=type]] [file=file][,if=type][,bus=nr]...",

        .help       = "hot-add PCI device",

        .mhandler.cmd = pci_device_hot_add,

    },

#endif

STEXI

@item pci_add

@findex pci_add

Hot-add PCI device.

ETEXI

#if defined(TARGET_I386)

    {

        .name       = "pci_del",

        .args_type  = "pci_addr:s",

        .params     = "[[<domain>:]<bus>:]<slot>",

        .help       = "hot remove PCI device",

        .mhandler.cmd = do_pci_device_hot_remove,

    },

#endif

STEXI

@item pci_del

@findex pci_del

Hot remove PCI device.

ETEXI

    {

        .name       = "pcie_aer_inject_error",

        .args_type  = "advisory_non_fatal:-a,correctable:-c,"

	              "id:s,error_status:s,"

	              "header0:i?,header1:i?,header2:i?,header3:i?,"

	              "prefix0:i?,prefix1:i?,prefix2:i?,prefix3:i?",

        .params     = "[-a] [-c] id "

                      "<error_status> [<tlp header> [<tlp header prefix>]]",

        .help       = "inject pcie aer error\n\t\t\t"

	              " -a for advisory non fatal error\n\t\t\t"

	              " -c for correctable error\n\t\t\t"

                      "<id> = qdev device id\n\t\t\t"

                      "<error_status> = error string or 32bit\n\t\t\t"

                      "<tlb header> = 32bit x 4\n\t\t\t"

                      "<tlb header prefix> = 32bit x 4",

        .user_print  = pcie_aer_inject_error_print,

        .mhandler.cmd_new = do_pcie_aer_inject_error,

    },

STEXI

@item pcie_aer_inject_error

@findex pcie_aer_inject_error

Inject PCIe AER error

ETEXI

    {

        .name       = "host_net_add",

        .args_type  = "device:s,opts:s?",

        .params     = "tap|user|socket|vde|dump [options]",

        .help       = "add host VLAN client",

        .mhandler.cmd = net_host_device_add,

    },

STEXI

@item host_net_add

@findex host_net_add

Add host VLAN client.

ETEXI

    {

        .name       = "host_net_remove",

        .args_type  = "vlan_id:i,device:s",

        .params     = "vlan_id name",

        .help       = "remove host VLAN client",

        .mhandler.cmd = net_host_device_remove,

    },

STEXI

@item host_net_remove

@findex host_net_remove

Remove host VLAN client.

ETEXI

    {

        .name       = "netdev_add",

        .args_type  = "netdev:O",

        .params     = "[user|tap|socket],id=str[,prop=value][,...]",

        .help       = "add host network device",

        .user_print = monitor_user_noop,

        .mhandler.cmd_new = do_netdev_add,

    },

STEXI

@item netdev_add

@findex netdev_add

Add host network device.

ETEXI

    {

        .name       = "netdev_del",

        .args_type  = "id:s",

        .params     = "id",

        .help       = "remove host network device",

        .user_print = monitor_user_noop,

        .mhandler.cmd_new = do_netdev_del,

    },

STEXI

@item netdev_del

@findex netdev_del

Remove host network device.

ETEXI

#ifdef CONFIG_SLIRP

    {

        .name       = "hostfwd_add",

        .args_type  = "arg1:s,arg2:s?,arg3:s?",

        .params     = "[vlan_id name] [tcp|udp]:[hostaddr]:hostport-[guestaddr]:guestport",

        .help       = "redirect TCP or UDP connections from host to guest (requires -net user)",

        .mhandler.cmd = net_slirp_hostfwd_add,

    },

#endif

STEXI

@item hostfwd_add

@findex hostfwd_add

Redirect TCP or UDP connections from host to guest (requires -net user).

ETEXI

#ifdef CONFIG_SLIRP

    {

        .name       = "hostfwd_remove",

        .args_type  = "arg1:s,arg2:s?,arg3:s?",

        .params     = "[vlan_id name] [tcp|udp]:[hostaddr]:hostport",

        .help       = "remove host-to-guest TCP or UDP redirection",

        .mhandler.cmd = net_slirp_hostfwd_remove,

    },

#endif

STEXI

@item hostfwd_remove

@findex hostfwd_remove

Remove host-to-guest TCP or UDP redirection.

ETEXI

    {

        .name       = "balloon",

        .args_type  = "value:M",

        .params     = "target",

        .help       = "request VM to change its memory allocation (in MB)",

        .mhandler.cmd = hmp_balloon,

    },

STEXI

@item balloon @var{value}

@findex balloon

Request VM to change its memory allocation to @var{value} (in MB).

ETEXI

    {

        .name       = "set_link",

        .args_type  = "name:s,up:b",

        .params     = "name on|off",

        .help       = "change the link status of a network adapter",

        .mhandler.cmd = hmp_set_link,

    },

STEXI

@item set_link @var{name} [on|off]

@findex set_link

Switch link @var{name} on (i.e. up) or off (i.e. down).

ETEXI

    {

        .name       = "watchdog_action",

        .args_type  = "action:s",

        .params     = "[reset|shutdown|poweroff|pause|debug|none]",

        .help       = "change watchdog action",

        .mhandler.cmd = do_watchdog_action,

    },

STEXI

@item watchdog_action

@findex watchdog_action

Change watchdog action.

ETEXI

    {

        .name       = "acl_show",

        .args_type  = "aclname:s",

        .params     = "aclname",

        .help       = "list rules in the access control list",

        .mhandler.cmd = do_acl_show,

    },

STEXI

@item acl_show @var{aclname}

@findex acl_show

List all the matching rules in the access control list, and the default

policy. There are currently two named access control lists,

@var{vnc.x509dname} and @var{vnc.username} matching on the x509 client

certificate distinguished name, and SASL username respectively.

ETEXI

    {

        .name       = "acl_policy",

        .args_type  = "aclname:s,policy:s",

        .params     = "aclname allow|deny",

        .help       = "set default access control list policy",

        .mhandler.cmd = do_acl_policy,

    },

STEXI

@item acl_policy @var{aclname} @code{allow|deny}

@findex acl_policy

Set the default access control list policy, used in the event that

none of the explicit rules match. The default policy at startup is

always @code{deny}.

ETEXI

    {

        .name       = "acl_add",

        .args_type  = "aclname:s,match:s,policy:s,index:i?",

        .params     = "aclname match allow|deny [index]",

        .help       = "add a match rule to the access control list",

        .mhandler.cmd = do_acl_add,

    },

STEXI

@item acl_add @var{aclname} @var{match} @code{allow|deny} [@var{index}]

@findex acl_add

Add a match rule to the access control list, allowing or denying access.

The match will normally be an exact username or x509 distinguished name,

but can optionally include wildcard globs. eg @code{*@@EXAMPLE.COM} to

allow all users in the @code{EXAMPLE.COM} kerberos realm. The match will

normally be appended to the end of the ACL, but can be inserted

earlier in the list if the optional @var{index} parameter is supplied.

ETEXI

    {

        .name       = "acl_remove",

        .args_type  = "aclname:s,match:s",

        .params     = "aclname match",

        .help       = "remove a match rule from the access control list",

        .mhandler.cmd = do_acl_remove,

    },

STEXI

@item acl_remove @var{aclname} @var{match}

@findex acl_remove

Remove the specified match rule from the access control list.

ETEXI

    {

        .name       = "acl_reset",

        .args_type  = "aclname:s",

        .params     = "aclname",

        .help       = "reset the access control list",

        .mhandler.cmd = do_acl_reset,

    },

STEXI

@item acl_reset @var{aclname}

@findex acl_reset

Remove all matches from the access control list, and set the default

policy back to @code{deny}.

ETEXI

#if defined(TARGET_I386)

    {

        .name       = "mce",

        .args_type  = "broadcast:-b,cpu_index:i,bank:i,status:l,mcg_status:l,addr:l,misc:l",

        .params     = "[-b] cpu bank status mcgstatus addr misc",

        .help       = "inject a MCE on the given CPU [and broadcast to other CPUs with -b option]",

        .mhandler.cmd = do_inject_mce,

    },

#endif

STEXI

@item mce @var{cpu} @var{bank} @var{status} @var{mcgstatus} @var{addr} @var{misc}

@findex mce (x86)

Inject an MCE on the given CPU (x86 only).

ETEXI

    {

        .name       = "getfd",

        .args_type  = "fdname:s",

        .params     = "getfd name",

        .help       = "receive a file descriptor via SCM rights and assign it a name",

        .user_print = monitor_user_noop,

        .mhandler.cmd_new = do_getfd,

    },

STEXI

@item getfd @var{fdname}

@findex getfd

If a file descriptor is passed alongside this command using the SCM_RIGHTS

mechanism on unix sockets, it is stored using the name @var{fdname} for

later use by other monitor commands.

ETEXI

    {

        .name       = "closefd",

        .args_type  = "fdname:s",

        .params     = "closefd name",

        .help       = "close a file descriptor previously passed via SCM rights",

        .user_print = monitor_user_noop,

        .mhandler.cmd_new = do_closefd,

    },

STEXI

@item closefd @var{fdname}

@findex closefd

Close the file descriptor previously assigned to @var{fdname} using the

@code{getfd} command. This is only needed if the file descriptor was never

used by another monitor command.

ETEXI

    {

        .name       = "block_passwd",

        .args_type  = "device:B,password:s",

        .params     = "block_passwd device password",

        .help       = "set the password of encrypted block devices",

        .mhandler.cmd = hmp_block_passwd,

    },

STEXI

@item block_set_io_throttle @var{device} @var{bps} @var{bps_rd} @var{bps_wr} @var{iops} @var{iops_rd} @var{iops_wr}

@findex block_set_io_throttle

Change I/O throttle limits for a block drive to @var{bps} @var{bps_rd} @var{bps_wr} @var{iops} @var{iops_rd} @var{iops_wr}

ETEXI

    {

        .name       = "block_set_io_throttle",

        .args_type  = "device:B,bps:l,bps_rd:l,bps_wr:l,iops:l,iops_rd:l,iops_wr:l",

        .params     = "device bps bps_rd bps_wr iops iops_rd iops_wr",

        .help       = "change I/O throttle limits for a block drive",

        .mhandler.cmd = hmp_block_set_io_throttle,

    },

STEXI

@item block_passwd @var{device} @var{password}

@findex block_passwd

Set the encrypted device @var{device} password to @var{password}

ETEXI

    {

        .name       = "set_password",

        .args_type  = "protocol:s,password:s,connected:s?",

        .params     = "protocol password action-if-connected",

        .help       = "set spice/vnc password",

        .mhandler.cmd = hmp_set_password,

    },

STEXI

@item set_password [ vnc | spice ] password [ action-if-connected ]

@findex set_password

Change spice/vnc password.  Use zero to make the password stay valid

forever.  @var{action-if-connected} specifies what should happen in

case a connection is established: @var{fail} makes the password change

fail.  @var{disconnect} changes the password and disconnects the

client.  @var{keep} changes the password and keeps the connection up.

@var{keep} is the default.

ETEXI

    {

        .name       = "expire_password",

        .args_type  = "protocol:s,time:s",

        .params     = "protocol time",

        .help       = "set spice/vnc password expire-time",

        .mhandler.cmd = hmp_expire_password,

    },

STEXI

@item expire_password [ vnc | spice ] expire-time

@findex expire_password

Specify when a password for spice/vnc becomes

invalid. @var{expire-time} accepts:

@table @var

@item now

Invalidate password instantly.

@item never

Password stays valid forever.

@item +nsec

Password stays valid for @var{nsec} seconds starting now.

@item nsec

Password is invalidated at the given time.  @var{nsec} are the seconds

passed since 1970, i.e. unix epoch.

@end table

ETEXI

    {

        .name       = "info",

        .args_type  = "item:s?",

        .params     = "[subcommand]",

        .help       = "show various information about the system state",

        .mhandler.cmd = do_info,

    },

STEXI

@item info @var{subcommand}

@findex info

Show various information about the system state.

@table @option

@item info version

show the version of QEMU

@item info network

show the various VLANs and the associated devices

@item info chardev

show the character devices

@item info block

show the block devices

@item info blockstats

show block device statistics

@item info registers

show the cpu registers

@item info cpus

show infos for each CPU

@item info history

show the command line history

@item info irq

show the interrupts statistics (if available)

@item info pic

show i8259 (PIC) state

@item info pci

show emulated PCI device info

@item info tlb

show virtual to physical memory mappings (i386, SH4, SPARC, and PPC only)

@item info mem

show the active virtual memory mappings (i386 only)

@item info jit

show dynamic compiler info

@item info numa

show NUMA information

@item info kvm

show KVM information

@item info usb

show USB devices plugged on the virtual USB hub

@item info usbhost

show all USB host devices

@item info profile

show profiling information

@item info capture

show information about active capturing

@item info snapshots

show list of VM snapshots

@item info status

show the current VM status (running|paused)

@item info pcmcia

show guest PCMCIA status

@item info mice

show which guest mouse is receiving events

@item info vnc

show the vnc server status

@item info name

show the current VM name

@item info uuid

show the current VM UUID

@item info cpustats

show CPU statistics

@item info usernet

show user network stack connection states

@item info migrate

show migration status

@item info balloon

show balloon information

@item info qtree

show device tree

@item info qdm

show qdev device model list

@item info roms

show roms

@end table

ETEXI

#ifdef CONFIG_TRACE_SIMPLE

STEXI

@item info trace

show contents of trace buffer

ETEXI

#endif

STEXI

@item info trace-events

show available trace events and their state

ETEXI

STEXI

@end table

ETEXI