root / hw / usb-musb.c @ 384dce1e
History | View | Annotate | Download (42.7 kB)
1 |
/*
|
---|---|
2 |
* "Inventra" High-speed Dual-Role Controller (MUSB-HDRC), Mentor Graphics,
|
3 |
* USB2.0 OTG compliant core used in various chips.
|
4 |
*
|
5 |
* Copyright (C) 2008 Nokia Corporation
|
6 |
* Written by Andrzej Zaborowski <andrew@openedhand.com>
|
7 |
*
|
8 |
* This program is free software; you can redistribute it and/or
|
9 |
* modify it under the terms of the GNU General Public License as
|
10 |
* published by the Free Software Foundation; either version 2 or
|
11 |
* (at your option) version 3 of the License.
|
12 |
*
|
13 |
* This program is distributed in the hope that it will be useful,
|
14 |
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
15 |
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
16 |
* GNU General Public License for more details.
|
17 |
*
|
18 |
* You should have received a copy of the GNU General Public License along
|
19 |
* with this program; if not, see <http://www.gnu.org/licenses/>.
|
20 |
*
|
21 |
* Only host-mode and non-DMA accesses are currently supported.
|
22 |
*/
|
23 |
#include "qemu-common.h" |
24 |
#include "qemu-timer.h" |
25 |
#include "usb.h" |
26 |
#include "irq.h" |
27 |
#include "hw.h" |
28 |
|
29 |
/* Common USB registers */
|
30 |
#define MUSB_HDRC_FADDR 0x00 /* 8-bit */ |
31 |
#define MUSB_HDRC_POWER 0x01 /* 8-bit */ |
32 |
|
33 |
#define MUSB_HDRC_INTRTX 0x02 /* 16-bit */ |
34 |
#define MUSB_HDRC_INTRRX 0x04 |
35 |
#define MUSB_HDRC_INTRTXE 0x06 |
36 |
#define MUSB_HDRC_INTRRXE 0x08 |
37 |
#define MUSB_HDRC_INTRUSB 0x0a /* 8 bit */ |
38 |
#define MUSB_HDRC_INTRUSBE 0x0b /* 8 bit */ |
39 |
#define MUSB_HDRC_FRAME 0x0c /* 16-bit */ |
40 |
#define MUSB_HDRC_INDEX 0x0e /* 8 bit */ |
41 |
#define MUSB_HDRC_TESTMODE 0x0f /* 8 bit */ |
42 |
|
43 |
/* Per-EP registers in indexed mode */
|
44 |
#define MUSB_HDRC_EP_IDX 0x10 /* 8-bit */ |
45 |
|
46 |
/* EP FIFOs */
|
47 |
#define MUSB_HDRC_FIFO 0x20 |
48 |
|
49 |
/* Additional Control Registers */
|
50 |
#define MUSB_HDRC_DEVCTL 0x60 /* 8 bit */ |
51 |
|
52 |
/* These are indexed */
|
53 |
#define MUSB_HDRC_TXFIFOSZ 0x62 /* 8 bit (see masks) */ |
54 |
#define MUSB_HDRC_RXFIFOSZ 0x63 /* 8 bit (see masks) */ |
55 |
#define MUSB_HDRC_TXFIFOADDR 0x64 /* 16 bit offset shifted right 3 */ |
56 |
#define MUSB_HDRC_RXFIFOADDR 0x66 /* 16 bit offset shifted right 3 */ |
57 |
|
58 |
/* Some more registers */
|
59 |
#define MUSB_HDRC_VCTRL 0x68 /* 8 bit */ |
60 |
#define MUSB_HDRC_HWVERS 0x6c /* 8 bit */ |
61 |
|
62 |
/* Added in HDRC 1.9(?) & MHDRC 1.4 */
|
63 |
/* ULPI pass-through */
|
64 |
#define MUSB_HDRC_ULPI_VBUSCTL 0x70 |
65 |
#define MUSB_HDRC_ULPI_REGDATA 0x74 |
66 |
#define MUSB_HDRC_ULPI_REGADDR 0x75 |
67 |
#define MUSB_HDRC_ULPI_REGCTL 0x76 |
68 |
|
69 |
/* Extended config & PHY control */
|
70 |
#define MUSB_HDRC_ENDCOUNT 0x78 /* 8 bit */ |
71 |
#define MUSB_HDRC_DMARAMCFG 0x79 /* 8 bit */ |
72 |
#define MUSB_HDRC_PHYWAIT 0x7a /* 8 bit */ |
73 |
#define MUSB_HDRC_PHYVPLEN 0x7b /* 8 bit */ |
74 |
#define MUSB_HDRC_HS_EOF1 0x7c /* 8 bit, units of 546.1 us */ |
75 |
#define MUSB_HDRC_FS_EOF1 0x7d /* 8 bit, units of 533.3 ns */ |
76 |
#define MUSB_HDRC_LS_EOF1 0x7e /* 8 bit, units of 1.067 us */ |
77 |
|
78 |
/* Per-EP BUSCTL registers */
|
79 |
#define MUSB_HDRC_BUSCTL 0x80 |
80 |
|
81 |
/* Per-EP registers in flat mode */
|
82 |
#define MUSB_HDRC_EP 0x100 |
83 |
|
84 |
/* offsets to registers in flat model */
|
85 |
#define MUSB_HDRC_TXMAXP 0x00 /* 16 bit apparently */ |
86 |
#define MUSB_HDRC_TXCSR 0x02 /* 16 bit apparently */ |
87 |
#define MUSB_HDRC_CSR0 MUSB_HDRC_TXCSR /* re-used for EP0 */ |
88 |
#define MUSB_HDRC_RXMAXP 0x04 /* 16 bit apparently */ |
89 |
#define MUSB_HDRC_RXCSR 0x06 /* 16 bit apparently */ |
90 |
#define MUSB_HDRC_RXCOUNT 0x08 /* 16 bit apparently */ |
91 |
#define MUSB_HDRC_COUNT0 MUSB_HDRC_RXCOUNT /* re-used for EP0 */ |
92 |
#define MUSB_HDRC_TXTYPE 0x0a /* 8 bit apparently */ |
93 |
#define MUSB_HDRC_TYPE0 MUSB_HDRC_TXTYPE /* re-used for EP0 */ |
94 |
#define MUSB_HDRC_TXINTERVAL 0x0b /* 8 bit apparently */ |
95 |
#define MUSB_HDRC_NAKLIMIT0 MUSB_HDRC_TXINTERVAL /* re-used for EP0 */ |
96 |
#define MUSB_HDRC_RXTYPE 0x0c /* 8 bit apparently */ |
97 |
#define MUSB_HDRC_RXINTERVAL 0x0d /* 8 bit apparently */ |
98 |
#define MUSB_HDRC_FIFOSIZE 0x0f /* 8 bit apparently */ |
99 |
#define MUSB_HDRC_CONFIGDATA MGC_O_HDRC_FIFOSIZE /* re-used for EP0 */ |
100 |
|
101 |
/* "Bus control" registers */
|
102 |
#define MUSB_HDRC_TXFUNCADDR 0x00 |
103 |
#define MUSB_HDRC_TXHUBADDR 0x02 |
104 |
#define MUSB_HDRC_TXHUBPORT 0x03 |
105 |
|
106 |
#define MUSB_HDRC_RXFUNCADDR 0x04 |
107 |
#define MUSB_HDRC_RXHUBADDR 0x06 |
108 |
#define MUSB_HDRC_RXHUBPORT 0x07 |
109 |
|
110 |
/*
|
111 |
* MUSBHDRC Register bit masks
|
112 |
*/
|
113 |
|
114 |
/* POWER */
|
115 |
#define MGC_M_POWER_ISOUPDATE 0x80 |
116 |
#define MGC_M_POWER_SOFTCONN 0x40 |
117 |
#define MGC_M_POWER_HSENAB 0x20 |
118 |
#define MGC_M_POWER_HSMODE 0x10 |
119 |
#define MGC_M_POWER_RESET 0x08 |
120 |
#define MGC_M_POWER_RESUME 0x04 |
121 |
#define MGC_M_POWER_SUSPENDM 0x02 |
122 |
#define MGC_M_POWER_ENSUSPEND 0x01 |
123 |
|
124 |
/* INTRUSB */
|
125 |
#define MGC_M_INTR_SUSPEND 0x01 |
126 |
#define MGC_M_INTR_RESUME 0x02 |
127 |
#define MGC_M_INTR_RESET 0x04 |
128 |
#define MGC_M_INTR_BABBLE 0x04 |
129 |
#define MGC_M_INTR_SOF 0x08 |
130 |
#define MGC_M_INTR_CONNECT 0x10 |
131 |
#define MGC_M_INTR_DISCONNECT 0x20 |
132 |
#define MGC_M_INTR_SESSREQ 0x40 |
133 |
#define MGC_M_INTR_VBUSERROR 0x80 /* FOR SESSION END */ |
134 |
#define MGC_M_INTR_EP0 0x01 /* FOR EP0 INTERRUPT */ |
135 |
|
136 |
/* DEVCTL */
|
137 |
#define MGC_M_DEVCTL_BDEVICE 0x80 |
138 |
#define MGC_M_DEVCTL_FSDEV 0x40 |
139 |
#define MGC_M_DEVCTL_LSDEV 0x20 |
140 |
#define MGC_M_DEVCTL_VBUS 0x18 |
141 |
#define MGC_S_DEVCTL_VBUS 3 |
142 |
#define MGC_M_DEVCTL_HM 0x04 |
143 |
#define MGC_M_DEVCTL_HR 0x02 |
144 |
#define MGC_M_DEVCTL_SESSION 0x01 |
145 |
|
146 |
/* TESTMODE */
|
147 |
#define MGC_M_TEST_FORCE_HOST 0x80 |
148 |
#define MGC_M_TEST_FIFO_ACCESS 0x40 |
149 |
#define MGC_M_TEST_FORCE_FS 0x20 |
150 |
#define MGC_M_TEST_FORCE_HS 0x10 |
151 |
#define MGC_M_TEST_PACKET 0x08 |
152 |
#define MGC_M_TEST_K 0x04 |
153 |
#define MGC_M_TEST_J 0x02 |
154 |
#define MGC_M_TEST_SE0_NAK 0x01 |
155 |
|
156 |
/* CSR0 */
|
157 |
#define MGC_M_CSR0_FLUSHFIFO 0x0100 |
158 |
#define MGC_M_CSR0_TXPKTRDY 0x0002 |
159 |
#define MGC_M_CSR0_RXPKTRDY 0x0001 |
160 |
|
161 |
/* CSR0 in Peripheral mode */
|
162 |
#define MGC_M_CSR0_P_SVDSETUPEND 0x0080 |
163 |
#define MGC_M_CSR0_P_SVDRXPKTRDY 0x0040 |
164 |
#define MGC_M_CSR0_P_SENDSTALL 0x0020 |
165 |
#define MGC_M_CSR0_P_SETUPEND 0x0010 |
166 |
#define MGC_M_CSR0_P_DATAEND 0x0008 |
167 |
#define MGC_M_CSR0_P_SENTSTALL 0x0004 |
168 |
|
169 |
/* CSR0 in Host mode */
|
170 |
#define MGC_M_CSR0_H_NO_PING 0x0800 |
171 |
#define MGC_M_CSR0_H_WR_DATATOGGLE 0x0400 /* set to allow setting: */ |
172 |
#define MGC_M_CSR0_H_DATATOGGLE 0x0200 /* data toggle control */ |
173 |
#define MGC_M_CSR0_H_NAKTIMEOUT 0x0080 |
174 |
#define MGC_M_CSR0_H_STATUSPKT 0x0040 |
175 |
#define MGC_M_CSR0_H_REQPKT 0x0020 |
176 |
#define MGC_M_CSR0_H_ERROR 0x0010 |
177 |
#define MGC_M_CSR0_H_SETUPPKT 0x0008 |
178 |
#define MGC_M_CSR0_H_RXSTALL 0x0004 |
179 |
|
180 |
/* CONFIGDATA */
|
181 |
#define MGC_M_CONFIGDATA_MPRXE 0x80 /* auto bulk pkt combining */ |
182 |
#define MGC_M_CONFIGDATA_MPTXE 0x40 /* auto bulk pkt splitting */ |
183 |
#define MGC_M_CONFIGDATA_BIGENDIAN 0x20 |
184 |
#define MGC_M_CONFIGDATA_HBRXE 0x10 /* HB-ISO for RX */ |
185 |
#define MGC_M_CONFIGDATA_HBTXE 0x08 /* HB-ISO for TX */ |
186 |
#define MGC_M_CONFIGDATA_DYNFIFO 0x04 /* dynamic FIFO sizing */ |
187 |
#define MGC_M_CONFIGDATA_SOFTCONE 0x02 /* SoftConnect */ |
188 |
#define MGC_M_CONFIGDATA_UTMIDW 0x01 /* Width, 0 => 8b, 1 => 16b */ |
189 |
|
190 |
/* TXCSR in Peripheral and Host mode */
|
191 |
#define MGC_M_TXCSR_AUTOSET 0x8000 |
192 |
#define MGC_M_TXCSR_ISO 0x4000 |
193 |
#define MGC_M_TXCSR_MODE 0x2000 |
194 |
#define MGC_M_TXCSR_DMAENAB 0x1000 |
195 |
#define MGC_M_TXCSR_FRCDATATOG 0x0800 |
196 |
#define MGC_M_TXCSR_DMAMODE 0x0400 |
197 |
#define MGC_M_TXCSR_CLRDATATOG 0x0040 |
198 |
#define MGC_M_TXCSR_FLUSHFIFO 0x0008 |
199 |
#define MGC_M_TXCSR_FIFONOTEMPTY 0x0002 |
200 |
#define MGC_M_TXCSR_TXPKTRDY 0x0001 |
201 |
|
202 |
/* TXCSR in Peripheral mode */
|
203 |
#define MGC_M_TXCSR_P_INCOMPTX 0x0080 |
204 |
#define MGC_M_TXCSR_P_SENTSTALL 0x0020 |
205 |
#define MGC_M_TXCSR_P_SENDSTALL 0x0010 |
206 |
#define MGC_M_TXCSR_P_UNDERRUN 0x0004 |
207 |
|
208 |
/* TXCSR in Host mode */
|
209 |
#define MGC_M_TXCSR_H_WR_DATATOGGLE 0x0200 |
210 |
#define MGC_M_TXCSR_H_DATATOGGLE 0x0100 |
211 |
#define MGC_M_TXCSR_H_NAKTIMEOUT 0x0080 |
212 |
#define MGC_M_TXCSR_H_RXSTALL 0x0020 |
213 |
#define MGC_M_TXCSR_H_ERROR 0x0004 |
214 |
|
215 |
/* RXCSR in Peripheral and Host mode */
|
216 |
#define MGC_M_RXCSR_AUTOCLEAR 0x8000 |
217 |
#define MGC_M_RXCSR_DMAENAB 0x2000 |
218 |
#define MGC_M_RXCSR_DISNYET 0x1000 |
219 |
#define MGC_M_RXCSR_DMAMODE 0x0800 |
220 |
#define MGC_M_RXCSR_INCOMPRX 0x0100 |
221 |
#define MGC_M_RXCSR_CLRDATATOG 0x0080 |
222 |
#define MGC_M_RXCSR_FLUSHFIFO 0x0010 |
223 |
#define MGC_M_RXCSR_DATAERROR 0x0008 |
224 |
#define MGC_M_RXCSR_FIFOFULL 0x0002 |
225 |
#define MGC_M_RXCSR_RXPKTRDY 0x0001 |
226 |
|
227 |
/* RXCSR in Peripheral mode */
|
228 |
#define MGC_M_RXCSR_P_ISO 0x4000 |
229 |
#define MGC_M_RXCSR_P_SENTSTALL 0x0040 |
230 |
#define MGC_M_RXCSR_P_SENDSTALL 0x0020 |
231 |
#define MGC_M_RXCSR_P_OVERRUN 0x0004 |
232 |
|
233 |
/* RXCSR in Host mode */
|
234 |
#define MGC_M_RXCSR_H_AUTOREQ 0x4000 |
235 |
#define MGC_M_RXCSR_H_WR_DATATOGGLE 0x0400 |
236 |
#define MGC_M_RXCSR_H_DATATOGGLE 0x0200 |
237 |
#define MGC_M_RXCSR_H_RXSTALL 0x0040 |
238 |
#define MGC_M_RXCSR_H_REQPKT 0x0020 |
239 |
#define MGC_M_RXCSR_H_ERROR 0x0004 |
240 |
|
241 |
/* HUBADDR */
|
242 |
#define MGC_M_HUBADDR_MULTI_TT 0x80 |
243 |
|
244 |
/* ULPI: Added in HDRC 1.9(?) & MHDRC 1.4 */
|
245 |
#define MGC_M_ULPI_VBCTL_USEEXTVBUSIND 0x02 |
246 |
#define MGC_M_ULPI_VBCTL_USEEXTVBUS 0x01 |
247 |
#define MGC_M_ULPI_REGCTL_INT_ENABLE 0x08 |
248 |
#define MGC_M_ULPI_REGCTL_READNOTWRITE 0x04 |
249 |
#define MGC_M_ULPI_REGCTL_COMPLETE 0x02 |
250 |
#define MGC_M_ULPI_REGCTL_REG 0x01 |
251 |
|
252 |
/* #define MUSB_DEBUG */
|
253 |
|
254 |
#ifdef MUSB_DEBUG
|
255 |
#define TRACE(fmt,...) fprintf(stderr, "%s@%d: " fmt "\n", __FUNCTION__, \ |
256 |
__LINE__, ##__VA_ARGS__) |
257 |
#else
|
258 |
#define TRACE(...)
|
259 |
#endif
|
260 |
|
261 |
|
262 |
static void musb_attach(USBPort *port, USBDevice *dev); |
263 |
|
264 |
typedef struct { |
265 |
uint16_t faddr[2];
|
266 |
uint8_t haddr[2];
|
267 |
uint8_t hport[2];
|
268 |
uint16_t csr[2];
|
269 |
uint16_t maxp[2];
|
270 |
uint16_t rxcount; |
271 |
uint8_t type[2];
|
272 |
uint8_t interval[2];
|
273 |
uint8_t config; |
274 |
uint8_t fifosize; |
275 |
int timeout[2]; /* Always in microframes */ |
276 |
|
277 |
uint8_t *buf[2];
|
278 |
int fifolen[2]; |
279 |
int fifostart[2]; |
280 |
int fifoaddr[2]; |
281 |
USBPacket packey[2];
|
282 |
int status[2]; |
283 |
int ext_size[2]; |
284 |
|
285 |
/* For callbacks' use */
|
286 |
int epnum;
|
287 |
int interrupt[2]; |
288 |
MUSBState *musb; |
289 |
USBCallback *delayed_cb[2];
|
290 |
QEMUTimer *intv_timer[2];
|
291 |
} MUSBEndPoint; |
292 |
|
293 |
struct MUSBState {
|
294 |
qemu_irq *irqs; |
295 |
USBBus bus; |
296 |
USBPort port; |
297 |
|
298 |
int idx;
|
299 |
uint8_t devctl; |
300 |
uint8_t power; |
301 |
uint8_t faddr; |
302 |
|
303 |
uint8_t intr; |
304 |
uint8_t mask; |
305 |
uint16_t tx_intr; |
306 |
uint16_t tx_mask; |
307 |
uint16_t rx_intr; |
308 |
uint16_t rx_mask; |
309 |
|
310 |
int setup_len;
|
311 |
int session;
|
312 |
|
313 |
uint8_t buf[0x8000];
|
314 |
|
315 |
/* Duplicating the world since 2008!... probably we should have 32
|
316 |
* logical, single endpoints instead. */
|
317 |
MUSBEndPoint ep[16];
|
318 |
} *musb_init(qemu_irq *irqs) |
319 |
{ |
320 |
MUSBState *s = qemu_mallocz(sizeof(*s));
|
321 |
int i;
|
322 |
|
323 |
s->irqs = irqs; |
324 |
|
325 |
s->faddr = 0x00;
|
326 |
s->power = MGC_M_POWER_HSENAB; |
327 |
s->tx_intr = 0x0000;
|
328 |
s->rx_intr = 0x0000;
|
329 |
s->tx_mask = 0xffff;
|
330 |
s->rx_mask = 0xffff;
|
331 |
s->intr = 0x00;
|
332 |
s->mask = 0x06;
|
333 |
s->idx = 0;
|
334 |
|
335 |
/* TODO: _DW */
|
336 |
s->ep[0].config = MGC_M_CONFIGDATA_SOFTCONE | MGC_M_CONFIGDATA_DYNFIFO;
|
337 |
for (i = 0; i < 16; i ++) { |
338 |
s->ep[i].fifosize = 64;
|
339 |
s->ep[i].maxp[0] = 0x40; |
340 |
s->ep[i].maxp[1] = 0x40; |
341 |
s->ep[i].musb = s; |
342 |
s->ep[i].epnum = i; |
343 |
} |
344 |
|
345 |
usb_bus_new(&s->bus, NULL /* FIXME */); |
346 |
usb_register_port(&s->bus, &s->port, s, 0, musb_attach);
|
347 |
|
348 |
return s;
|
349 |
} |
350 |
|
351 |
static void musb_vbus_set(MUSBState *s, int level) |
352 |
{ |
353 |
if (level)
|
354 |
s->devctl |= 3 << MGC_S_DEVCTL_VBUS;
|
355 |
else
|
356 |
s->devctl &= ~MGC_M_DEVCTL_VBUS; |
357 |
|
358 |
qemu_set_irq(s->irqs[musb_set_vbus], level); |
359 |
} |
360 |
|
361 |
static void musb_intr_set(MUSBState *s, int line, int level) |
362 |
{ |
363 |
if (!level) {
|
364 |
s->intr &= ~(1 << line);
|
365 |
qemu_irq_lower(s->irqs[line]); |
366 |
} else if (s->mask & (1 << line)) { |
367 |
s->intr |= 1 << line;
|
368 |
qemu_irq_raise(s->irqs[line]); |
369 |
} |
370 |
} |
371 |
|
372 |
static void musb_tx_intr_set(MUSBState *s, int line, int level) |
373 |
{ |
374 |
if (!level) {
|
375 |
s->tx_intr &= ~(1 << line);
|
376 |
if (!s->tx_intr)
|
377 |
qemu_irq_lower(s->irqs[musb_irq_tx]); |
378 |
} else if (s->tx_mask & (1 << line)) { |
379 |
s->tx_intr |= 1 << line;
|
380 |
qemu_irq_raise(s->irqs[musb_irq_tx]); |
381 |
} |
382 |
} |
383 |
|
384 |
static void musb_rx_intr_set(MUSBState *s, int line, int level) |
385 |
{ |
386 |
if (line) {
|
387 |
if (!level) {
|
388 |
s->rx_intr &= ~(1 << line);
|
389 |
if (!s->rx_intr)
|
390 |
qemu_irq_lower(s->irqs[musb_irq_rx]); |
391 |
} else if (s->rx_mask & (1 << line)) { |
392 |
s->rx_intr |= 1 << line;
|
393 |
qemu_irq_raise(s->irqs[musb_irq_rx]); |
394 |
} |
395 |
} else
|
396 |
musb_tx_intr_set(s, line, level); |
397 |
} |
398 |
|
399 |
uint32_t musb_core_intr_get(MUSBState *s) |
400 |
{ |
401 |
return (s->rx_intr << 15) | s->tx_intr; |
402 |
} |
403 |
|
404 |
void musb_core_intr_clear(MUSBState *s, uint32_t mask)
|
405 |
{ |
406 |
if (s->rx_intr) {
|
407 |
s->rx_intr &= mask >> 15;
|
408 |
if (!s->rx_intr)
|
409 |
qemu_irq_lower(s->irqs[musb_irq_rx]); |
410 |
} |
411 |
|
412 |
if (s->tx_intr) {
|
413 |
s->tx_intr &= mask & 0xffff;
|
414 |
if (!s->tx_intr)
|
415 |
qemu_irq_lower(s->irqs[musb_irq_tx]); |
416 |
} |
417 |
} |
418 |
|
419 |
void musb_set_size(MUSBState *s, int epnum, int size, int is_tx) |
420 |
{ |
421 |
s->ep[epnum].ext_size[!is_tx] = size; |
422 |
s->ep[epnum].fifostart[0] = 0; |
423 |
s->ep[epnum].fifostart[1] = 0; |
424 |
s->ep[epnum].fifolen[0] = 0; |
425 |
s->ep[epnum].fifolen[1] = 0; |
426 |
} |
427 |
|
428 |
static void musb_session_update(MUSBState *s, int prev_dev, int prev_sess) |
429 |
{ |
430 |
int detect_prev = prev_dev && prev_sess;
|
431 |
int detect = !!s->port.dev && s->session;
|
432 |
|
433 |
if (detect && !detect_prev) {
|
434 |
/* Let's skip the ID pin sense and VBUS sense formalities and
|
435 |
* and signal a successful SRP directly. This should work at least
|
436 |
* for the Linux driver stack. */
|
437 |
musb_intr_set(s, musb_irq_connect, 1);
|
438 |
|
439 |
if (s->port.dev->speed == USB_SPEED_LOW) {
|
440 |
s->devctl &= ~MGC_M_DEVCTL_FSDEV; |
441 |
s->devctl |= MGC_M_DEVCTL_LSDEV; |
442 |
} else {
|
443 |
s->devctl |= MGC_M_DEVCTL_FSDEV; |
444 |
s->devctl &= ~MGC_M_DEVCTL_LSDEV; |
445 |
} |
446 |
|
447 |
/* A-mode? */
|
448 |
s->devctl &= ~MGC_M_DEVCTL_BDEVICE; |
449 |
|
450 |
/* Host-mode bit? */
|
451 |
s->devctl |= MGC_M_DEVCTL_HM; |
452 |
#if 1 |
453 |
musb_vbus_set(s, 1);
|
454 |
#endif
|
455 |
} else if (!detect && detect_prev) { |
456 |
#if 1 |
457 |
musb_vbus_set(s, 0);
|
458 |
#endif
|
459 |
} |
460 |
} |
461 |
|
462 |
/* Attach or detach a device on our only port. */
|
463 |
static void musb_attach(USBPort *port, USBDevice *dev) |
464 |
{ |
465 |
MUSBState *s = (MUSBState *) port->opaque; |
466 |
USBDevice *curr; |
467 |
|
468 |
port = &s->port; |
469 |
curr = port->dev; |
470 |
|
471 |
if (dev) {
|
472 |
if (curr) {
|
473 |
usb_attach(port, NULL);
|
474 |
/* TODO: signal some interrupts */
|
475 |
} |
476 |
|
477 |
musb_intr_set(s, musb_irq_vbus_request, 1);
|
478 |
|
479 |
/* Send the attach message to device */
|
480 |
usb_send_msg(dev, USB_MSG_ATTACH); |
481 |
} else if (curr) { |
482 |
/* Send the detach message */
|
483 |
usb_send_msg(curr, USB_MSG_DETACH); |
484 |
|
485 |
musb_intr_set(s, musb_irq_disconnect, 1);
|
486 |
} |
487 |
|
488 |
port->dev = dev; |
489 |
|
490 |
musb_session_update(s, !!curr, s->session); |
491 |
} |
492 |
|
493 |
static inline void musb_cb_tick0(void *opaque) |
494 |
{ |
495 |
MUSBEndPoint *ep = (MUSBEndPoint *) opaque; |
496 |
|
497 |
ep->delayed_cb[0](&ep->packey[0], opaque); |
498 |
} |
499 |
|
500 |
static inline void musb_cb_tick1(void *opaque) |
501 |
{ |
502 |
MUSBEndPoint *ep = (MUSBEndPoint *) opaque; |
503 |
|
504 |
ep->delayed_cb[1](&ep->packey[1], opaque); |
505 |
} |
506 |
|
507 |
#define musb_cb_tick (dir ? musb_cb_tick1 : musb_cb_tick0)
|
508 |
|
509 |
static inline void musb_schedule_cb(USBPacket *packey, void *opaque, int dir) |
510 |
{ |
511 |
MUSBEndPoint *ep = (MUSBEndPoint *) opaque; |
512 |
int timeout = 0; |
513 |
|
514 |
if (ep->status[dir] == USB_RET_NAK)
|
515 |
timeout = ep->timeout[dir]; |
516 |
else if (ep->interrupt[dir]) |
517 |
timeout = 8;
|
518 |
else
|
519 |
return musb_cb_tick(opaque);
|
520 |
|
521 |
if (!ep->intv_timer[dir])
|
522 |
ep->intv_timer[dir] = qemu_new_timer(vm_clock, musb_cb_tick, opaque); |
523 |
|
524 |
qemu_mod_timer(ep->intv_timer[dir], qemu_get_clock(vm_clock) + |
525 |
muldiv64(timeout, get_ticks_per_sec(), 8000));
|
526 |
} |
527 |
|
528 |
static void musb_schedule0_cb(USBPacket *packey, void *opaque) |
529 |
{ |
530 |
return musb_schedule_cb(packey, opaque, 0); |
531 |
} |
532 |
|
533 |
static void musb_schedule1_cb(USBPacket *packey, void *opaque) |
534 |
{ |
535 |
return musb_schedule_cb(packey, opaque, 1); |
536 |
} |
537 |
|
538 |
static int musb_timeout(int ttype, int speed, int val) |
539 |
{ |
540 |
#if 1 |
541 |
return val << 3; |
542 |
#endif
|
543 |
|
544 |
switch (ttype) {
|
545 |
case USB_ENDPOINT_XFER_CONTROL:
|
546 |
if (val < 2) |
547 |
return 0; |
548 |
else if (speed == USB_SPEED_HIGH) |
549 |
return 1 << (val - 1); |
550 |
else
|
551 |
return 8 << (val - 1); |
552 |
|
553 |
case USB_ENDPOINT_XFER_INT:
|
554 |
if (speed == USB_SPEED_HIGH)
|
555 |
if (val < 2) |
556 |
return 0; |
557 |
else
|
558 |
return 1 << (val - 1); |
559 |
else
|
560 |
return val << 3; |
561 |
|
562 |
case USB_ENDPOINT_XFER_BULK:
|
563 |
case USB_ENDPOINT_XFER_ISOC:
|
564 |
if (val < 2) |
565 |
return 0; |
566 |
else if (speed == USB_SPEED_HIGH) |
567 |
return 1 << (val - 1); |
568 |
else
|
569 |
return 8 << (val - 1); |
570 |
/* TODO: what with low-speed Bulk and Isochronous? */
|
571 |
} |
572 |
|
573 |
hw_error("bad interval\n");
|
574 |
} |
575 |
|
576 |
static inline void musb_packet(MUSBState *s, MUSBEndPoint *ep, |
577 |
int epnum, int pid, int len, USBCallback cb, int dir) |
578 |
{ |
579 |
int ret;
|
580 |
int idx = epnum && dir;
|
581 |
int ttype;
|
582 |
|
583 |
/* ep->type[0,1] contains:
|
584 |
* in bits 7:6 the speed (0 - invalid, 1 - high, 2 - full, 3 - slow)
|
585 |
* in bits 5:4 the transfer type (BULK / INT)
|
586 |
* in bits 3:0 the EP num
|
587 |
*/
|
588 |
ttype = epnum ? (ep->type[idx] >> 4) & 3 : 0; |
589 |
|
590 |
ep->timeout[dir] = musb_timeout(ttype, |
591 |
ep->type[idx] >> 6, ep->interval[idx]);
|
592 |
ep->interrupt[dir] = ttype == USB_ENDPOINT_XFER_INT; |
593 |
ep->delayed_cb[dir] = cb; |
594 |
cb = dir ? musb_schedule1_cb : musb_schedule0_cb; |
595 |
|
596 |
ep->packey[dir].pid = pid; |
597 |
/* A wild guess on the FADDR semantics... */
|
598 |
ep->packey[dir].devaddr = ep->faddr[idx]; |
599 |
ep->packey[dir].devep = ep->type[idx] & 0xf;
|
600 |
ep->packey[dir].data = (void *) ep->buf[idx];
|
601 |
ep->packey[dir].len = len; |
602 |
ep->packey[dir].complete_cb = cb; |
603 |
ep->packey[dir].complete_opaque = ep; |
604 |
|
605 |
if (s->port.dev)
|
606 |
ret = s->port.dev->info->handle_packet(s->port.dev, &ep->packey[dir]); |
607 |
else
|
608 |
ret = USB_RET_NODEV; |
609 |
|
610 |
if (ret == USB_RET_ASYNC) {
|
611 |
ep->status[dir] = len; |
612 |
return;
|
613 |
} |
614 |
|
615 |
ep->status[dir] = ret; |
616 |
usb_packet_complete(&ep->packey[dir]); |
617 |
} |
618 |
|
619 |
static void musb_tx_packet_complete(USBPacket *packey, void *opaque) |
620 |
{ |
621 |
/* Unfortunately we can't use packey->devep because that's the remote
|
622 |
* endpoint number and may be different than our local. */
|
623 |
MUSBEndPoint *ep = (MUSBEndPoint *) opaque; |
624 |
int epnum = ep->epnum;
|
625 |
MUSBState *s = ep->musb; |
626 |
|
627 |
ep->fifostart[0] = 0; |
628 |
ep->fifolen[0] = 0; |
629 |
#ifdef CLEAR_NAK
|
630 |
if (ep->status[0] != USB_RET_NAK) { |
631 |
#endif
|
632 |
if (epnum)
|
633 |
ep->csr[0] &= ~(MGC_M_TXCSR_FIFONOTEMPTY | MGC_M_TXCSR_TXPKTRDY);
|
634 |
else
|
635 |
ep->csr[0] &= ~MGC_M_CSR0_TXPKTRDY;
|
636 |
#ifdef CLEAR_NAK
|
637 |
} |
638 |
#endif
|
639 |
|
640 |
/* Clear all of the error bits first */
|
641 |
if (epnum)
|
642 |
ep->csr[0] &= ~(MGC_M_TXCSR_H_ERROR | MGC_M_TXCSR_H_RXSTALL |
|
643 |
MGC_M_TXCSR_H_NAKTIMEOUT); |
644 |
else
|
645 |
ep->csr[0] &= ~(MGC_M_CSR0_H_ERROR | MGC_M_CSR0_H_RXSTALL |
|
646 |
MGC_M_CSR0_H_NAKTIMEOUT | MGC_M_CSR0_H_NO_PING); |
647 |
|
648 |
if (ep->status[0] == USB_RET_STALL) { |
649 |
/* Command not supported by target! */
|
650 |
ep->status[0] = 0; |
651 |
|
652 |
if (epnum)
|
653 |
ep->csr[0] |= MGC_M_TXCSR_H_RXSTALL;
|
654 |
else
|
655 |
ep->csr[0] |= MGC_M_CSR0_H_RXSTALL;
|
656 |
} |
657 |
|
658 |
if (ep->status[0] == USB_RET_NAK) { |
659 |
ep->status[0] = 0; |
660 |
|
661 |
/* NAK timeouts are only generated in Bulk transfers and
|
662 |
* Data-errors in Isochronous. */
|
663 |
if (ep->interrupt[0]) { |
664 |
return;
|
665 |
} |
666 |
|
667 |
if (epnum)
|
668 |
ep->csr[0] |= MGC_M_TXCSR_H_NAKTIMEOUT;
|
669 |
else
|
670 |
ep->csr[0] |= MGC_M_CSR0_H_NAKTIMEOUT;
|
671 |
} |
672 |
|
673 |
if (ep->status[0] < 0) { |
674 |
if (ep->status[0] == USB_RET_BABBLE) |
675 |
musb_intr_set(s, musb_irq_rst_babble, 1);
|
676 |
|
677 |
/* Pretend we've tried three times already and failed (in
|
678 |
* case of USB_TOKEN_SETUP). */
|
679 |
if (epnum)
|
680 |
ep->csr[0] |= MGC_M_TXCSR_H_ERROR;
|
681 |
else
|
682 |
ep->csr[0] |= MGC_M_CSR0_H_ERROR;
|
683 |
|
684 |
musb_tx_intr_set(s, epnum, 1);
|
685 |
return;
|
686 |
} |
687 |
/* TODO: check len for over/underruns of an OUT packet? */
|
688 |
|
689 |
#ifdef SETUPLEN_HACK
|
690 |
if (!epnum && ep->packey[0].pid == USB_TOKEN_SETUP) |
691 |
s->setup_len = ep->packey[0].data[6]; |
692 |
#endif
|
693 |
|
694 |
/* In DMA mode: if no error, assert DMA request for this EP,
|
695 |
* and skip the interrupt. */
|
696 |
musb_tx_intr_set(s, epnum, 1);
|
697 |
} |
698 |
|
699 |
static void musb_rx_packet_complete(USBPacket *packey, void *opaque) |
700 |
{ |
701 |
/* Unfortunately we can't use packey->devep because that's the remote
|
702 |
* endpoint number and may be different than our local. */
|
703 |
MUSBEndPoint *ep = (MUSBEndPoint *) opaque; |
704 |
int epnum = ep->epnum;
|
705 |
MUSBState *s = ep->musb; |
706 |
|
707 |
ep->fifostart[1] = 0; |
708 |
ep->fifolen[1] = 0; |
709 |
|
710 |
#ifdef CLEAR_NAK
|
711 |
if (ep->status[1] != USB_RET_NAK) { |
712 |
#endif
|
713 |
ep->csr[1] &= ~MGC_M_RXCSR_H_REQPKT;
|
714 |
if (!epnum)
|
715 |
ep->csr[0] &= ~MGC_M_CSR0_H_REQPKT;
|
716 |
#ifdef CLEAR_NAK
|
717 |
} |
718 |
#endif
|
719 |
|
720 |
/* Clear all of the imaginable error bits first */
|
721 |
ep->csr[1] &= ~(MGC_M_RXCSR_H_ERROR | MGC_M_RXCSR_H_RXSTALL |
|
722 |
MGC_M_RXCSR_DATAERROR); |
723 |
if (!epnum)
|
724 |
ep->csr[0] &= ~(MGC_M_CSR0_H_ERROR | MGC_M_CSR0_H_RXSTALL |
|
725 |
MGC_M_CSR0_H_NAKTIMEOUT | MGC_M_CSR0_H_NO_PING); |
726 |
|
727 |
if (ep->status[1] == USB_RET_STALL) { |
728 |
ep->status[1] = 0; |
729 |
packey->len = 0;
|
730 |
|
731 |
ep->csr[1] |= MGC_M_RXCSR_H_RXSTALL;
|
732 |
if (!epnum)
|
733 |
ep->csr[0] |= MGC_M_CSR0_H_RXSTALL;
|
734 |
} |
735 |
|
736 |
if (ep->status[1] == USB_RET_NAK) { |
737 |
ep->status[1] = 0; |
738 |
|
739 |
/* NAK timeouts are only generated in Bulk transfers and
|
740 |
* Data-errors in Isochronous. */
|
741 |
if (ep->interrupt[1]) |
742 |
return musb_packet(s, ep, epnum, USB_TOKEN_IN,
|
743 |
packey->len, musb_rx_packet_complete, 1);
|
744 |
|
745 |
ep->csr[1] |= MGC_M_RXCSR_DATAERROR;
|
746 |
if (!epnum)
|
747 |
ep->csr[0] |= MGC_M_CSR0_H_NAKTIMEOUT;
|
748 |
} |
749 |
|
750 |
if (ep->status[1] < 0) { |
751 |
if (ep->status[1] == USB_RET_BABBLE) { |
752 |
musb_intr_set(s, musb_irq_rst_babble, 1);
|
753 |
return;
|
754 |
} |
755 |
|
756 |
/* Pretend we've tried three times already and failed (in
|
757 |
* case of a control transfer). */
|
758 |
ep->csr[1] |= MGC_M_RXCSR_H_ERROR;
|
759 |
if (!epnum)
|
760 |
ep->csr[0] |= MGC_M_CSR0_H_ERROR;
|
761 |
|
762 |
musb_rx_intr_set(s, epnum, 1);
|
763 |
return;
|
764 |
} |
765 |
/* TODO: check len for over/underruns of an OUT packet? */
|
766 |
/* TODO: perhaps make use of e->ext_size[1] here. */
|
767 |
|
768 |
packey->len = ep->status[1];
|
769 |
|
770 |
if (!(ep->csr[1] & (MGC_M_RXCSR_H_RXSTALL | MGC_M_RXCSR_DATAERROR))) { |
771 |
ep->csr[1] |= MGC_M_RXCSR_FIFOFULL | MGC_M_RXCSR_RXPKTRDY;
|
772 |
if (!epnum)
|
773 |
ep->csr[0] |= MGC_M_CSR0_RXPKTRDY;
|
774 |
|
775 |
ep->rxcount = packey->len; /* XXX: MIN(packey->len, ep->maxp[1]); */
|
776 |
/* In DMA mode: assert DMA request for this EP */
|
777 |
} |
778 |
|
779 |
/* Only if DMA has not been asserted */
|
780 |
musb_rx_intr_set(s, epnum, 1);
|
781 |
} |
782 |
|
783 |
static void musb_tx_rdy(MUSBState *s, int epnum) |
784 |
{ |
785 |
MUSBEndPoint *ep = s->ep + epnum; |
786 |
int pid;
|
787 |
int total, valid = 0; |
788 |
TRACE("start %d, len %d", ep->fifostart[0], ep->fifolen[0] ); |
789 |
ep->fifostart[0] += ep->fifolen[0]; |
790 |
ep->fifolen[0] = 0; |
791 |
|
792 |
/* XXX: how's the total size of the packet retrieved exactly in
|
793 |
* the generic case? */
|
794 |
total = ep->maxp[0] & 0x3ff; |
795 |
|
796 |
if (ep->ext_size[0]) { |
797 |
total = ep->ext_size[0];
|
798 |
ep->ext_size[0] = 0; |
799 |
valid = 1;
|
800 |
} |
801 |
|
802 |
/* If the packet is not fully ready yet, wait for a next segment. */
|
803 |
if (epnum && (ep->fifostart[0]) < total) |
804 |
return;
|
805 |
|
806 |
if (!valid)
|
807 |
total = ep->fifostart[0];
|
808 |
|
809 |
pid = USB_TOKEN_OUT; |
810 |
if (!epnum && (ep->csr[0] & MGC_M_CSR0_H_SETUPPKT)) { |
811 |
pid = USB_TOKEN_SETUP; |
812 |
if (total != 8) { |
813 |
TRACE("illegal SETUPPKT length of %i bytes", total);
|
814 |
} |
815 |
/* Controller should retry SETUP packets three times on errors
|
816 |
* but it doesn't make sense for us to do that. */
|
817 |
} |
818 |
|
819 |
return musb_packet(s, ep, epnum, pid,
|
820 |
total, musb_tx_packet_complete, 0);
|
821 |
} |
822 |
|
823 |
static void musb_rx_req(MUSBState *s, int epnum) |
824 |
{ |
825 |
MUSBEndPoint *ep = s->ep + epnum; |
826 |
int total;
|
827 |
|
828 |
/* If we already have a packet, which didn't fit into the
|
829 |
* 64 bytes of the FIFO, only move the FIFO start and return. (Obsolete) */
|
830 |
if (ep->packey[1].pid == USB_TOKEN_IN && ep->status[1] >= 0 && |
831 |
(ep->fifostart[1]) + ep->rxcount <
|
832 |
ep->packey[1].len) {
|
833 |
TRACE("0x%08x, %d", ep->fifostart[1], ep->rxcount ); |
834 |
ep->fifostart[1] += ep->rxcount;
|
835 |
ep->fifolen[1] = 0; |
836 |
|
837 |
ep->rxcount = MIN(ep->packey[0].len - (ep->fifostart[1]), |
838 |
ep->maxp[1]);
|
839 |
|
840 |
ep->csr[1] &= ~MGC_M_RXCSR_H_REQPKT;
|
841 |
if (!epnum)
|
842 |
ep->csr[0] &= ~MGC_M_CSR0_H_REQPKT;
|
843 |
|
844 |
/* Clear all of the error bits first */
|
845 |
ep->csr[1] &= ~(MGC_M_RXCSR_H_ERROR | MGC_M_RXCSR_H_RXSTALL |
|
846 |
MGC_M_RXCSR_DATAERROR); |
847 |
if (!epnum)
|
848 |
ep->csr[0] &= ~(MGC_M_CSR0_H_ERROR | MGC_M_CSR0_H_RXSTALL |
|
849 |
MGC_M_CSR0_H_NAKTIMEOUT | MGC_M_CSR0_H_NO_PING); |
850 |
|
851 |
ep->csr[1] |= MGC_M_RXCSR_FIFOFULL | MGC_M_RXCSR_RXPKTRDY;
|
852 |
if (!epnum)
|
853 |
ep->csr[0] |= MGC_M_CSR0_RXPKTRDY;
|
854 |
musb_rx_intr_set(s, epnum, 1);
|
855 |
return;
|
856 |
} |
857 |
|
858 |
/* The driver sets maxp[1] to 64 or less because it knows the hardware
|
859 |
* FIFO is this deep. Bigger packets get split in
|
860 |
* usb_generic_handle_packet but we can also do the splitting locally
|
861 |
* for performance. It turns out we can also have a bigger FIFO and
|
862 |
* ignore the limit set in ep->maxp[1]. The Linux MUSB driver deals
|
863 |
* OK with single packets of even 32KB and we avoid splitting, however
|
864 |
* usb_msd.c sometimes sends a packet bigger than what Linux expects
|
865 |
* (e.g. 8192 bytes instead of 4096) and we get an OVERRUN. Splitting
|
866 |
* hides this overrun from Linux. Up to 4096 everything is fine
|
867 |
* though. Currently this is disabled.
|
868 |
*
|
869 |
* XXX: mind ep->fifosize. */
|
870 |
total = MIN(ep->maxp[1] & 0x3ff, sizeof(s->buf)); |
871 |
|
872 |
#ifdef SETUPLEN_HACK
|
873 |
/* Why should *we* do that instead of Linux? */
|
874 |
if (!epnum) {
|
875 |
if (ep->packey[0].devaddr == 2) |
876 |
total = MIN(s->setup_len, 8);
|
877 |
else
|
878 |
total = MIN(s->setup_len, 64);
|
879 |
s->setup_len -= total; |
880 |
} |
881 |
#endif
|
882 |
|
883 |
return musb_packet(s, ep, epnum, USB_TOKEN_IN,
|
884 |
total, musb_rx_packet_complete, 1);
|
885 |
} |
886 |
|
887 |
static uint8_t musb_read_fifo(MUSBEndPoint *ep)
|
888 |
{ |
889 |
uint8_t value; |
890 |
if (ep->fifolen[1] >= 64) { |
891 |
/* We have a FIFO underrun */
|
892 |
TRACE("EP%d FIFO is now empty, stop reading", ep->epnum);
|
893 |
return 0x00000000; |
894 |
} |
895 |
/* In DMA mode clear RXPKTRDY and set REQPKT automatically
|
896 |
* (if AUTOREQ is set) */
|
897 |
|
898 |
ep->csr[1] &= ~MGC_M_RXCSR_FIFOFULL;
|
899 |
value=ep->buf[1][ep->fifostart[1] + ep->fifolen[1] ++]; |
900 |
TRACE("EP%d 0x%02x, %d", ep->epnum, value, ep->fifolen[1] ); |
901 |
return value;
|
902 |
} |
903 |
|
904 |
static void musb_write_fifo(MUSBEndPoint *ep, uint8_t value) |
905 |
{ |
906 |
TRACE("EP%d = %02x", ep->epnum, value);
|
907 |
if (ep->fifolen[0] >= 64) { |
908 |
/* We have a FIFO overrun */
|
909 |
TRACE("EP%d FIFO exceeded 64 bytes, stop feeding data", ep->epnum);
|
910 |
return;
|
911 |
} |
912 |
|
913 |
ep->buf[0][ep->fifostart[0] + ep->fifolen[0] ++] = value; |
914 |
ep->csr[0] |= MGC_M_TXCSR_FIFONOTEMPTY;
|
915 |
} |
916 |
|
917 |
static void musb_ep_frame_cancel(MUSBEndPoint *ep, int dir) |
918 |
{ |
919 |
if (ep->intv_timer[dir])
|
920 |
qemu_del_timer(ep->intv_timer[dir]); |
921 |
} |
922 |
|
923 |
/* Bus control */
|
924 |
static uint8_t musb_busctl_readb(void *opaque, int ep, int addr) |
925 |
{ |
926 |
MUSBState *s = (MUSBState *) opaque; |
927 |
|
928 |
switch (addr) {
|
929 |
/* For USB2.0 HS hubs only */
|
930 |
case MUSB_HDRC_TXHUBADDR:
|
931 |
return s->ep[ep].haddr[0]; |
932 |
case MUSB_HDRC_TXHUBPORT:
|
933 |
return s->ep[ep].hport[0]; |
934 |
case MUSB_HDRC_RXHUBADDR:
|
935 |
return s->ep[ep].haddr[1]; |
936 |
case MUSB_HDRC_RXHUBPORT:
|
937 |
return s->ep[ep].hport[1]; |
938 |
|
939 |
default:
|
940 |
TRACE("unknown register 0x%02x", addr);
|
941 |
return 0x00; |
942 |
}; |
943 |
} |
944 |
|
945 |
static void musb_busctl_writeb(void *opaque, int ep, int addr, uint8_t value) |
946 |
{ |
947 |
MUSBState *s = (MUSBState *) opaque; |
948 |
|
949 |
switch (addr) {
|
950 |
case MUSB_HDRC_TXFUNCADDR:
|
951 |
s->ep[ep].faddr[0] = value;
|
952 |
break;
|
953 |
case MUSB_HDRC_RXFUNCADDR:
|
954 |
s->ep[ep].faddr[1] = value;
|
955 |
break;
|
956 |
case MUSB_HDRC_TXHUBADDR:
|
957 |
s->ep[ep].haddr[0] = value;
|
958 |
break;
|
959 |
case MUSB_HDRC_TXHUBPORT:
|
960 |
s->ep[ep].hport[0] = value;
|
961 |
break;
|
962 |
case MUSB_HDRC_RXHUBADDR:
|
963 |
s->ep[ep].haddr[1] = value;
|
964 |
break;
|
965 |
case MUSB_HDRC_RXHUBPORT:
|
966 |
s->ep[ep].hport[1] = value;
|
967 |
break;
|
968 |
|
969 |
default:
|
970 |
TRACE("unknown register 0x%02x", addr);
|
971 |
break;
|
972 |
}; |
973 |
} |
974 |
|
975 |
static uint16_t musb_busctl_readh(void *opaque, int ep, int addr) |
976 |
{ |
977 |
MUSBState *s = (MUSBState *) opaque; |
978 |
|
979 |
switch (addr) {
|
980 |
case MUSB_HDRC_TXFUNCADDR:
|
981 |
return s->ep[ep].faddr[0]; |
982 |
case MUSB_HDRC_RXFUNCADDR:
|
983 |
return s->ep[ep].faddr[1]; |
984 |
|
985 |
default:
|
986 |
return musb_busctl_readb(s, ep, addr) |
|
987 |
(musb_busctl_readb(s, ep, addr | 1) << 8); |
988 |
}; |
989 |
} |
990 |
|
991 |
static void musb_busctl_writeh(void *opaque, int ep, int addr, uint16_t value) |
992 |
{ |
993 |
MUSBState *s = (MUSBState *) opaque; |
994 |
|
995 |
switch (addr) {
|
996 |
case MUSB_HDRC_TXFUNCADDR:
|
997 |
s->ep[ep].faddr[0] = value;
|
998 |
break;
|
999 |
case MUSB_HDRC_RXFUNCADDR:
|
1000 |
s->ep[ep].faddr[1] = value;
|
1001 |
break;
|
1002 |
|
1003 |
default:
|
1004 |
musb_busctl_writeb(s, ep, addr, value & 0xff);
|
1005 |
musb_busctl_writeb(s, ep, addr | 1, value >> 8); |
1006 |
}; |
1007 |
} |
1008 |
|
1009 |
/* Endpoint control */
|
1010 |
static uint8_t musb_ep_readb(void *opaque, int ep, int addr) |
1011 |
{ |
1012 |
MUSBState *s = (MUSBState *) opaque; |
1013 |
|
1014 |
switch (addr) {
|
1015 |
case MUSB_HDRC_TXTYPE:
|
1016 |
return s->ep[ep].type[0]; |
1017 |
case MUSB_HDRC_TXINTERVAL:
|
1018 |
return s->ep[ep].interval[0]; |
1019 |
case MUSB_HDRC_RXTYPE:
|
1020 |
return s->ep[ep].type[1]; |
1021 |
case MUSB_HDRC_RXINTERVAL:
|
1022 |
return s->ep[ep].interval[1]; |
1023 |
case (MUSB_HDRC_FIFOSIZE & ~1): |
1024 |
return 0x00; |
1025 |
case MUSB_HDRC_FIFOSIZE:
|
1026 |
return ep ? s->ep[ep].fifosize : s->ep[ep].config;
|
1027 |
case MUSB_HDRC_RXCOUNT:
|
1028 |
return s->ep[ep].rxcount;
|
1029 |
|
1030 |
default:
|
1031 |
TRACE("unknown register 0x%02x", addr);
|
1032 |
return 0x00; |
1033 |
}; |
1034 |
} |
1035 |
|
1036 |
static void musb_ep_writeb(void *opaque, int ep, int addr, uint8_t value) |
1037 |
{ |
1038 |
MUSBState *s = (MUSBState *) opaque; |
1039 |
|
1040 |
switch (addr) {
|
1041 |
case MUSB_HDRC_TXTYPE:
|
1042 |
s->ep[ep].type[0] = value;
|
1043 |
break;
|
1044 |
case MUSB_HDRC_TXINTERVAL:
|
1045 |
s->ep[ep].interval[0] = value;
|
1046 |
musb_ep_frame_cancel(&s->ep[ep], 0);
|
1047 |
break;
|
1048 |
case MUSB_HDRC_RXTYPE:
|
1049 |
s->ep[ep].type[1] = value;
|
1050 |
break;
|
1051 |
case MUSB_HDRC_RXINTERVAL:
|
1052 |
s->ep[ep].interval[1] = value;
|
1053 |
musb_ep_frame_cancel(&s->ep[ep], 1);
|
1054 |
break;
|
1055 |
case (MUSB_HDRC_FIFOSIZE & ~1): |
1056 |
break;
|
1057 |
case MUSB_HDRC_FIFOSIZE:
|
1058 |
TRACE("somebody messes with fifosize (now %i bytes)", value);
|
1059 |
s->ep[ep].fifosize = value; |
1060 |
break;
|
1061 |
default:
|
1062 |
TRACE("unknown register 0x%02x", addr);
|
1063 |
break;
|
1064 |
}; |
1065 |
} |
1066 |
|
1067 |
static uint16_t musb_ep_readh(void *opaque, int ep, int addr) |
1068 |
{ |
1069 |
MUSBState *s = (MUSBState *) opaque; |
1070 |
uint16_t ret; |
1071 |
|
1072 |
switch (addr) {
|
1073 |
case MUSB_HDRC_TXMAXP:
|
1074 |
return s->ep[ep].maxp[0]; |
1075 |
case MUSB_HDRC_TXCSR:
|
1076 |
return s->ep[ep].csr[0]; |
1077 |
case MUSB_HDRC_RXMAXP:
|
1078 |
return s->ep[ep].maxp[1]; |
1079 |
case MUSB_HDRC_RXCSR:
|
1080 |
ret = s->ep[ep].csr[1];
|
1081 |
|
1082 |
/* TODO: This and other bits probably depend on
|
1083 |
* ep->csr[1] & MGC_M_RXCSR_AUTOCLEAR. */
|
1084 |
if (s->ep[ep].csr[1] & MGC_M_RXCSR_AUTOCLEAR) |
1085 |
s->ep[ep].csr[1] &= ~MGC_M_RXCSR_RXPKTRDY;
|
1086 |
|
1087 |
return ret;
|
1088 |
case MUSB_HDRC_RXCOUNT:
|
1089 |
return s->ep[ep].rxcount;
|
1090 |
|
1091 |
default:
|
1092 |
return musb_ep_readb(s, ep, addr) |
|
1093 |
(musb_ep_readb(s, ep, addr | 1) << 8); |
1094 |
}; |
1095 |
} |
1096 |
|
1097 |
static void musb_ep_writeh(void *opaque, int ep, int addr, uint16_t value) |
1098 |
{ |
1099 |
MUSBState *s = (MUSBState *) opaque; |
1100 |
|
1101 |
switch (addr) {
|
1102 |
case MUSB_HDRC_TXMAXP:
|
1103 |
s->ep[ep].maxp[0] = value;
|
1104 |
break;
|
1105 |
case MUSB_HDRC_TXCSR:
|
1106 |
if (ep) {
|
1107 |
s->ep[ep].csr[0] &= value & 0xa6; |
1108 |
s->ep[ep].csr[0] |= value & 0xff59; |
1109 |
} else {
|
1110 |
s->ep[ep].csr[0] &= value & 0x85; |
1111 |
s->ep[ep].csr[0] |= value & 0xf7a; |
1112 |
} |
1113 |
|
1114 |
musb_ep_frame_cancel(&s->ep[ep], 0);
|
1115 |
|
1116 |
if ((ep && (value & MGC_M_TXCSR_FLUSHFIFO)) ||
|
1117 |
(!ep && (value & MGC_M_CSR0_FLUSHFIFO))) { |
1118 |
s->ep[ep].fifolen[0] = 0; |
1119 |
s->ep[ep].fifostart[0] = 0; |
1120 |
if (ep)
|
1121 |
s->ep[ep].csr[0] &=
|
1122 |
~(MGC_M_TXCSR_FIFONOTEMPTY | MGC_M_TXCSR_TXPKTRDY); |
1123 |
else
|
1124 |
s->ep[ep].csr[0] &=
|
1125 |
~(MGC_M_CSR0_TXPKTRDY | MGC_M_CSR0_RXPKTRDY); |
1126 |
} |
1127 |
if (
|
1128 |
(ep && |
1129 |
#ifdef CLEAR_NAK
|
1130 |
(value & MGC_M_TXCSR_TXPKTRDY) && |
1131 |
!(value & MGC_M_TXCSR_H_NAKTIMEOUT)) || |
1132 |
#else
|
1133 |
(value & MGC_M_TXCSR_TXPKTRDY)) || |
1134 |
#endif
|
1135 |
(!ep && |
1136 |
#ifdef CLEAR_NAK
|
1137 |
(value & MGC_M_CSR0_TXPKTRDY) && |
1138 |
!(value & MGC_M_CSR0_H_NAKTIMEOUT))) |
1139 |
#else
|
1140 |
(value & MGC_M_CSR0_TXPKTRDY))) |
1141 |
#endif
|
1142 |
musb_tx_rdy(s, ep); |
1143 |
if (!ep &&
|
1144 |
(value & MGC_M_CSR0_H_REQPKT) && |
1145 |
#ifdef CLEAR_NAK
|
1146 |
!(value & (MGC_M_CSR0_H_NAKTIMEOUT | |
1147 |
MGC_M_CSR0_RXPKTRDY))) |
1148 |
#else
|
1149 |
!(value & MGC_M_CSR0_RXPKTRDY)) |
1150 |
#endif
|
1151 |
musb_rx_req(s, ep); |
1152 |
break;
|
1153 |
|
1154 |
case MUSB_HDRC_RXMAXP:
|
1155 |
s->ep[ep].maxp[1] = value;
|
1156 |
break;
|
1157 |
case MUSB_HDRC_RXCSR:
|
1158 |
/* (DMA mode only) */
|
1159 |
if (
|
1160 |
(value & MGC_M_RXCSR_H_AUTOREQ) && |
1161 |
!(value & MGC_M_RXCSR_RXPKTRDY) && |
1162 |
(s->ep[ep].csr[1] & MGC_M_RXCSR_RXPKTRDY))
|
1163 |
value |= MGC_M_RXCSR_H_REQPKT; |
1164 |
|
1165 |
s->ep[ep].csr[1] &= 0x102 | (value & 0x4d); |
1166 |
s->ep[ep].csr[1] |= value & 0xfeb0; |
1167 |
|
1168 |
musb_ep_frame_cancel(&s->ep[ep], 1);
|
1169 |
|
1170 |
if (value & MGC_M_RXCSR_FLUSHFIFO) {
|
1171 |
s->ep[ep].fifolen[1] = 0; |
1172 |
s->ep[ep].fifostart[1] = 0; |
1173 |
s->ep[ep].csr[1] &= ~(MGC_M_RXCSR_FIFOFULL | MGC_M_RXCSR_RXPKTRDY);
|
1174 |
/* If double buffering and we have two packets ready, flush
|
1175 |
* only the first one and set up the fifo at the second packet. */
|
1176 |
} |
1177 |
#ifdef CLEAR_NAK
|
1178 |
if ((value & MGC_M_RXCSR_H_REQPKT) && !(value & MGC_M_RXCSR_DATAERROR))
|
1179 |
#else
|
1180 |
if (value & MGC_M_RXCSR_H_REQPKT)
|
1181 |
#endif
|
1182 |
musb_rx_req(s, ep); |
1183 |
break;
|
1184 |
case MUSB_HDRC_RXCOUNT:
|
1185 |
s->ep[ep].rxcount = value; |
1186 |
break;
|
1187 |
|
1188 |
default:
|
1189 |
musb_ep_writeb(s, ep, addr, value & 0xff);
|
1190 |
musb_ep_writeb(s, ep, addr | 1, value >> 8); |
1191 |
}; |
1192 |
} |
1193 |
|
1194 |
/* Generic control */
|
1195 |
static uint32_t musb_readb(void *opaque, target_phys_addr_t addr) |
1196 |
{ |
1197 |
MUSBState *s = (MUSBState *) opaque; |
1198 |
int ep, i;
|
1199 |
uint8_t ret; |
1200 |
|
1201 |
switch (addr) {
|
1202 |
case MUSB_HDRC_FADDR:
|
1203 |
return s->faddr;
|
1204 |
case MUSB_HDRC_POWER:
|
1205 |
return s->power;
|
1206 |
case MUSB_HDRC_INTRUSB:
|
1207 |
ret = s->intr; |
1208 |
for (i = 0; i < sizeof(ret) * 8; i ++) |
1209 |
if (ret & (1 << i)) |
1210 |
musb_intr_set(s, i, 0);
|
1211 |
return ret;
|
1212 |
case MUSB_HDRC_INTRUSBE:
|
1213 |
return s->mask;
|
1214 |
case MUSB_HDRC_INDEX:
|
1215 |
return s->idx;
|
1216 |
case MUSB_HDRC_TESTMODE:
|
1217 |
return 0x00; |
1218 |
|
1219 |
case MUSB_HDRC_EP_IDX ... (MUSB_HDRC_EP_IDX + 0xf): |
1220 |
return musb_ep_readb(s, s->idx, addr & 0xf); |
1221 |
|
1222 |
case MUSB_HDRC_DEVCTL:
|
1223 |
return s->devctl;
|
1224 |
|
1225 |
case MUSB_HDRC_TXFIFOSZ:
|
1226 |
case MUSB_HDRC_RXFIFOSZ:
|
1227 |
case MUSB_HDRC_VCTRL:
|
1228 |
/* TODO */
|
1229 |
return 0x00; |
1230 |
|
1231 |
case MUSB_HDRC_HWVERS:
|
1232 |
return (1 << 10) | 400; |
1233 |
|
1234 |
case (MUSB_HDRC_VCTRL | 1): |
1235 |
case (MUSB_HDRC_HWVERS | 1): |
1236 |
case (MUSB_HDRC_DEVCTL | 1): |
1237 |
return 0x00; |
1238 |
|
1239 |
case MUSB_HDRC_BUSCTL ... (MUSB_HDRC_BUSCTL + 0x7f): |
1240 |
ep = (addr >> 3) & 0xf; |
1241 |
return musb_busctl_readb(s, ep, addr & 0x7); |
1242 |
|
1243 |
case MUSB_HDRC_EP ... (MUSB_HDRC_EP + 0xff): |
1244 |
ep = (addr >> 4) & 0xf; |
1245 |
return musb_ep_readb(s, ep, addr & 0xf); |
1246 |
|
1247 |
case MUSB_HDRC_FIFO ... (MUSB_HDRC_FIFO + 0x3f): |
1248 |
ep = ((addr - MUSB_HDRC_FIFO) >> 2) & 0xf; |
1249 |
return musb_read_fifo(s->ep + ep);
|
1250 |
|
1251 |
default:
|
1252 |
TRACE("unknown register 0x%02x", (int) addr); |
1253 |
return 0x00; |
1254 |
}; |
1255 |
} |
1256 |
|
1257 |
static void musb_writeb(void *opaque, target_phys_addr_t addr, uint32_t value) |
1258 |
{ |
1259 |
MUSBState *s = (MUSBState *) opaque; |
1260 |
int ep;
|
1261 |
|
1262 |
switch (addr) {
|
1263 |
case MUSB_HDRC_FADDR:
|
1264 |
s->faddr = value & 0x7f;
|
1265 |
break;
|
1266 |
case MUSB_HDRC_POWER:
|
1267 |
s->power = (value & 0xef) | (s->power & 0x10); |
1268 |
/* MGC_M_POWER_RESET is also read-only in Peripheral Mode */
|
1269 |
if ((value & MGC_M_POWER_RESET) && s->port.dev) {
|
1270 |
usb_send_msg(s->port.dev, USB_MSG_RESET); |
1271 |
/* Negotiate high-speed operation if MGC_M_POWER_HSENAB is set. */
|
1272 |
if ((value & MGC_M_POWER_HSENAB) &&
|
1273 |
s->port.dev->speed == USB_SPEED_HIGH) |
1274 |
s->power |= MGC_M_POWER_HSMODE; /* Success */
|
1275 |
/* Restart frame counting. */
|
1276 |
} |
1277 |
if (value & MGC_M_POWER_SUSPENDM) {
|
1278 |
/* When all transfers finish, suspend and if MGC_M_POWER_ENSUSPEND
|
1279 |
* is set, also go into low power mode. Frame counting stops. */
|
1280 |
/* XXX: Cleared when the interrupt register is read */
|
1281 |
} |
1282 |
if (value & MGC_M_POWER_RESUME) {
|
1283 |
/* Wait 20ms and signal resuming on the bus. Frame counting
|
1284 |
* restarts. */
|
1285 |
} |
1286 |
break;
|
1287 |
case MUSB_HDRC_INTRUSB:
|
1288 |
break;
|
1289 |
case MUSB_HDRC_INTRUSBE:
|
1290 |
s->mask = value & 0xff;
|
1291 |
break;
|
1292 |
case MUSB_HDRC_INDEX:
|
1293 |
s->idx = value & 0xf;
|
1294 |
break;
|
1295 |
case MUSB_HDRC_TESTMODE:
|
1296 |
break;
|
1297 |
|
1298 |
case MUSB_HDRC_EP_IDX ... (MUSB_HDRC_EP_IDX + 0xf): |
1299 |
musb_ep_writeb(s, s->idx, addr & 0xf, value);
|
1300 |
break;
|
1301 |
|
1302 |
case MUSB_HDRC_DEVCTL:
|
1303 |
s->session = !!(value & MGC_M_DEVCTL_SESSION); |
1304 |
musb_session_update(s, |
1305 |
!!s->port.dev, |
1306 |
!!(s->devctl & MGC_M_DEVCTL_SESSION)); |
1307 |
|
1308 |
/* It seems this is the only R/W bit in this register? */
|
1309 |
s->devctl &= ~MGC_M_DEVCTL_SESSION; |
1310 |
s->devctl |= value & MGC_M_DEVCTL_SESSION; |
1311 |
break;
|
1312 |
|
1313 |
case MUSB_HDRC_TXFIFOSZ:
|
1314 |
case MUSB_HDRC_RXFIFOSZ:
|
1315 |
case MUSB_HDRC_VCTRL:
|
1316 |
/* TODO */
|
1317 |
break;
|
1318 |
|
1319 |
case (MUSB_HDRC_VCTRL | 1): |
1320 |
case (MUSB_HDRC_DEVCTL | 1): |
1321 |
break;
|
1322 |
|
1323 |
case MUSB_HDRC_BUSCTL ... (MUSB_HDRC_BUSCTL + 0x7f): |
1324 |
ep = (addr >> 3) & 0xf; |
1325 |
musb_busctl_writeb(s, ep, addr & 0x7, value);
|
1326 |
break;
|
1327 |
|
1328 |
case MUSB_HDRC_EP ... (MUSB_HDRC_EP + 0xff): |
1329 |
ep = (addr >> 4) & 0xf; |
1330 |
musb_ep_writeb(s, ep, addr & 0xf, value);
|
1331 |
break;
|
1332 |
|
1333 |
case MUSB_HDRC_FIFO ... (MUSB_HDRC_FIFO + 0x3f): |
1334 |
ep = ((addr - MUSB_HDRC_FIFO) >> 2) & 0xf; |
1335 |
musb_write_fifo(s->ep + ep, value & 0xff);
|
1336 |
break;
|
1337 |
|
1338 |
default:
|
1339 |
TRACE("unknown register 0x%02x", (int) addr); |
1340 |
break;
|
1341 |
}; |
1342 |
} |
1343 |
|
1344 |
static uint32_t musb_readh(void *opaque, target_phys_addr_t addr) |
1345 |
{ |
1346 |
MUSBState *s = (MUSBState *) opaque; |
1347 |
int ep, i;
|
1348 |
uint16_t ret; |
1349 |
|
1350 |
switch (addr) {
|
1351 |
case MUSB_HDRC_INTRTX:
|
1352 |
ret = s->tx_intr; |
1353 |
/* Auto clear */
|
1354 |
for (i = 0; i < sizeof(ret) * 8; i ++) |
1355 |
if (ret & (1 << i)) |
1356 |
musb_tx_intr_set(s, i, 0);
|
1357 |
return ret;
|
1358 |
case MUSB_HDRC_INTRRX:
|
1359 |
ret = s->rx_intr; |
1360 |
/* Auto clear */
|
1361 |
for (i = 0; i < sizeof(ret) * 8; i ++) |
1362 |
if (ret & (1 << i)) |
1363 |
musb_rx_intr_set(s, i, 0);
|
1364 |
return ret;
|
1365 |
case MUSB_HDRC_INTRTXE:
|
1366 |
return s->tx_mask;
|
1367 |
case MUSB_HDRC_INTRRXE:
|
1368 |
return s->rx_mask;
|
1369 |
|
1370 |
case MUSB_HDRC_FRAME:
|
1371 |
/* TODO */
|
1372 |
return 0x0000; |
1373 |
case MUSB_HDRC_TXFIFOADDR:
|
1374 |
return s->ep[s->idx].fifoaddr[0]; |
1375 |
case MUSB_HDRC_RXFIFOADDR:
|
1376 |
return s->ep[s->idx].fifoaddr[1]; |
1377 |
|
1378 |
case MUSB_HDRC_EP_IDX ... (MUSB_HDRC_EP_IDX + 0xf): |
1379 |
return musb_ep_readh(s, s->idx, addr & 0xf); |
1380 |
|
1381 |
case MUSB_HDRC_BUSCTL ... (MUSB_HDRC_BUSCTL + 0x7f): |
1382 |
ep = (addr >> 3) & 0xf; |
1383 |
return musb_busctl_readh(s, ep, addr & 0x7); |
1384 |
|
1385 |
case MUSB_HDRC_EP ... (MUSB_HDRC_EP + 0xff): |
1386 |
ep = (addr >> 4) & 0xf; |
1387 |
return musb_ep_readh(s, ep, addr & 0xf); |
1388 |
|
1389 |
case MUSB_HDRC_FIFO ... (MUSB_HDRC_FIFO + 0x3f): |
1390 |
ep = ((addr - MUSB_HDRC_FIFO) >> 2) & 0xf; |
1391 |
return (musb_read_fifo(s->ep + ep) | musb_read_fifo(s->ep + ep) << 8); |
1392 |
|
1393 |
default:
|
1394 |
return musb_readb(s, addr) | (musb_readb(s, addr | 1) << 8); |
1395 |
}; |
1396 |
} |
1397 |
|
1398 |
static void musb_writeh(void *opaque, target_phys_addr_t addr, uint32_t value) |
1399 |
{ |
1400 |
MUSBState *s = (MUSBState *) opaque; |
1401 |
int ep;
|
1402 |
|
1403 |
switch (addr) {
|
1404 |
case MUSB_HDRC_INTRTXE:
|
1405 |
s->tx_mask = value; |
1406 |
/* XXX: the masks seem to apply on the raising edge like with
|
1407 |
* edge-triggered interrupts, thus no need to update. I may be
|
1408 |
* wrong though. */
|
1409 |
break;
|
1410 |
case MUSB_HDRC_INTRRXE:
|
1411 |
s->rx_mask = value; |
1412 |
break;
|
1413 |
|
1414 |
case MUSB_HDRC_FRAME:
|
1415 |
/* TODO */
|
1416 |
break;
|
1417 |
case MUSB_HDRC_TXFIFOADDR:
|
1418 |
s->ep[s->idx].fifoaddr[0] = value;
|
1419 |
s->ep[s->idx].buf[0] =
|
1420 |
s->buf + ((value << 3) & 0x7ff ); |
1421 |
break;
|
1422 |
case MUSB_HDRC_RXFIFOADDR:
|
1423 |
s->ep[s->idx].fifoaddr[1] = value;
|
1424 |
s->ep[s->idx].buf[1] =
|
1425 |
s->buf + ((value << 3) & 0x7ff); |
1426 |
break;
|
1427 |
|
1428 |
case MUSB_HDRC_EP_IDX ... (MUSB_HDRC_EP_IDX + 0xf): |
1429 |
musb_ep_writeh(s, s->idx, addr & 0xf, value);
|
1430 |
break;
|
1431 |
|
1432 |
case MUSB_HDRC_BUSCTL ... (MUSB_HDRC_BUSCTL + 0x7f): |
1433 |
ep = (addr >> 3) & 0xf; |
1434 |
musb_busctl_writeh(s, ep, addr & 0x7, value);
|
1435 |
break;
|
1436 |
|
1437 |
case MUSB_HDRC_EP ... (MUSB_HDRC_EP + 0xff): |
1438 |
ep = (addr >> 4) & 0xf; |
1439 |
musb_ep_writeh(s, ep, addr & 0xf, value);
|
1440 |
break;
|
1441 |
|
1442 |
case MUSB_HDRC_FIFO ... (MUSB_HDRC_FIFO + 0x3f): |
1443 |
ep = ((addr - MUSB_HDRC_FIFO) >> 2) & 0xf; |
1444 |
musb_write_fifo(s->ep + ep, value & 0xff);
|
1445 |
musb_write_fifo(s->ep + ep, (value >> 8) & 0xff); |
1446 |
break;
|
1447 |
|
1448 |
default:
|
1449 |
musb_writeb(s, addr, value & 0xff);
|
1450 |
musb_writeb(s, addr | 1, value >> 8); |
1451 |
}; |
1452 |
} |
1453 |
|
1454 |
static uint32_t musb_readw(void *opaque, target_phys_addr_t addr) |
1455 |
{ |
1456 |
MUSBState *s = (MUSBState *) opaque; |
1457 |
int ep;
|
1458 |
|
1459 |
switch (addr) {
|
1460 |
case MUSB_HDRC_FIFO ... (MUSB_HDRC_FIFO + 0x3f): |
1461 |
ep = ((addr - MUSB_HDRC_FIFO) >> 2) & 0xf; |
1462 |
return ( musb_read_fifo(s->ep + ep) |
|
1463 |
musb_read_fifo(s->ep + ep) << 8 |
|
1464 |
musb_read_fifo(s->ep + ep) << 16 |
|
1465 |
musb_read_fifo(s->ep + ep) << 24 );
|
1466 |
default:
|
1467 |
TRACE("unknown register 0x%02x", (int) addr); |
1468 |
return 0x00000000; |
1469 |
}; |
1470 |
} |
1471 |
|
1472 |
static void musb_writew(void *opaque, target_phys_addr_t addr, uint32_t value) |
1473 |
{ |
1474 |
MUSBState *s = (MUSBState *) opaque; |
1475 |
int ep;
|
1476 |
|
1477 |
switch (addr) {
|
1478 |
case MUSB_HDRC_FIFO ... (MUSB_HDRC_FIFO + 0x3f): |
1479 |
ep = ((addr - MUSB_HDRC_FIFO) >> 2) & 0xf; |
1480 |
musb_write_fifo(s->ep + ep, value & 0xff);
|
1481 |
musb_write_fifo(s->ep + ep, (value >> 8 ) & 0xff); |
1482 |
musb_write_fifo(s->ep + ep, (value >> 16) & 0xff); |
1483 |
musb_write_fifo(s->ep + ep, (value >> 24) & 0xff); |
1484 |
break;
|
1485 |
default:
|
1486 |
TRACE("unknown register 0x%02x", (int) addr); |
1487 |
break;
|
1488 |
}; |
1489 |
} |
1490 |
|
1491 |
CPUReadMemoryFunc * const musb_read[] = {
|
1492 |
musb_readb, |
1493 |
musb_readh, |
1494 |
musb_readw, |
1495 |
}; |
1496 |
|
1497 |
CPUWriteMemoryFunc * const musb_write[] = {
|
1498 |
musb_writeb, |
1499 |
musb_writeh, |
1500 |
musb_writew, |
1501 |
}; |