Archipelago » qemu

/*

 * ARM Versatile Platform/Application Baseboard System emulation.

 *

 * Copyright (c) 2005-2007 CodeSourcery.

 * Written by Paul Brook

 *

 * This code is licensed under the GPL.

 */

#include "sysbus.h"

#include "arm-misc.h"

#include "devices.h"

#include "net.h"

#include "sysemu.h"

#include "pci.h"

#include "boards.h"

#include "blockdev.h"

#include "exec-memory.h"

/* Primary interrupt controller.  */

typedef struct vpb_sic_state

{

  SysBusDevice busdev;

  MemoryRegion iomem;

  uint32_t level;

  uint32_t mask;

  uint32_t pic_enable;

  qemu_irq parent[32];

  int irq;

} vpb_sic_state;

static const VMStateDescription vmstate_vpb_sic = {

    .name = "versatilepb_sic",

    .version_id = 1,

    .minimum_version_id = 1,

    .fields = (VMStateField[]) {

        VMSTATE_UINT32(level, vpb_sic_state),

        VMSTATE_UINT32(mask, vpb_sic_state),

        VMSTATE_UINT32(pic_enable, vpb_sic_state),

        VMSTATE_END_OF_LIST()

    }

};

static void vpb_sic_update(vpb_sic_state *s)

{

    uint32_t flags;

    flags = s->level & s->mask;

    qemu_set_irq(s->parent[s->irq], flags != 0);

}

static void vpb_sic_update_pic(vpb_sic_state *s)

{

    int i;

    uint32_t mask;

    for (i = 21; i <= 30; i++) {

        mask = 1u << i;

        if (!(s->pic_enable & mask))

            continue;

        qemu_set_irq(s->parent[i], (s->level & mask) != 0);

    }

}

static void vpb_sic_set_irq(void *opaque, int irq, int level)

{

    vpb_sic_state *s = (vpb_sic_state *)opaque;

    if (level)

        s->level |= 1u << irq;

    else

        s->level &= ~(1u << irq);

    if (s->pic_enable & (1u << irq))

        qemu_set_irq(s->parent[irq], level);

    vpb_sic_update(s);

}

static uint64_t vpb_sic_read(void *opaque, target_phys_addr_t offset,

                             unsigned size)

{

    vpb_sic_state *s = (vpb_sic_state *)opaque;

    switch (offset >> 2) {

    case 0: /* STATUS */

        return s->level & s->mask;

    case 1: /* RAWSTAT */

        return s->level;

    case 2: /* ENABLE */

        return s->mask;

    case 4: /* SOFTINT */

        return s->level & 1;

    case 8: /* PICENABLE */

        return s->pic_enable;

    default:

        printf ("vpb_sic_read: Bad register offset 0x%x\n", (int)offset);

        return 0;

    }

}

static void vpb_sic_write(void *opaque, target_phys_addr_t offset,

                          uint64_t value, unsigned size)

{

    vpb_sic_state *s = (vpb_sic_state *)opaque;

    switch (offset >> 2) {

    case 2: /* ENSET */

        s->mask |= value;

        break;

    case 3: /* ENCLR */

        s->mask &= ~value;

        break;

    case 4: /* SOFTINTSET */

        if (value)

            s->mask |= 1;

        break;

    case 5: /* SOFTINTCLR */

        if (value)

            s->mask &= ~1u;

        break;

    case 8: /* PICENSET */

        s->pic_enable |= (value & 0x7fe00000);

        vpb_sic_update_pic(s);

        break;

    case 9: /* PICENCLR */

        s->pic_enable &= ~value;

        vpb_sic_update_pic(s);

        break;

    default:

        printf ("vpb_sic_write: Bad register offset 0x%x\n", (int)offset);

        return;

    }

    vpb_sic_update(s);

}

static const MemoryRegionOps vpb_sic_ops = {

    .read = vpb_sic_read,

    .write = vpb_sic_write,

    .endianness = DEVICE_NATIVE_ENDIAN,

};

static int vpb_sic_init(SysBusDevice *dev)

{

    vpb_sic_state *s = FROM_SYSBUS(vpb_sic_state, dev);

    int i;

    qdev_init_gpio_in(&dev->qdev, vpb_sic_set_irq, 32);

    for (i = 0; i < 32; i++) {

        sysbus_init_irq(dev, &s->parent[i]);

    }

    s->irq = 31;

    memory_region_init_io(&s->iomem, &vpb_sic_ops, s, "vpb-sic", 0x1000);

    sysbus_init_mmio(dev, &s->iomem);

    return 0;

}

/* Board init.  */

/* The AB and PB boards both use the same core, just with different

   peripherans and expansion busses.  For now we emulate a subset of the

   PB peripherals and just change the board ID.  */

static struct arm_boot_info versatile_binfo;

static void versatile_init(ram_addr_t ram_size,

                     const char *boot_device,

                     const char *kernel_filename, const char *kernel_cmdline,

                     const char *initrd_filename, const char *cpu_model,

                     int board_id)

{

    CPUARMState *env;

    MemoryRegion *sysmem = get_system_memory();

    MemoryRegion *ram = g_new(MemoryRegion, 1);

    qemu_irq *cpu_pic;

    qemu_irq pic[32];

    qemu_irq sic[32];

    DeviceState *dev, *sysctl;

    SysBusDevice *busdev;

    DeviceState *pl041;

    PCIBus *pci_bus;

    NICInfo *nd;

    int n;

    int done_smc = 0;

    if (!cpu_model)

        cpu_model = "arm926";

    env = cpu_init(cpu_model);

    if (!env) {

        fprintf(stderr, "Unable to find CPU definition\n");

        exit(1);

    }

    memory_region_init_ram(ram, "versatile.ram", ram_size);

    vmstate_register_ram_global(ram);

    /* ??? RAM should repeat to fill physical memory space.  */

    /* SDRAM at address zero.  */

    memory_region_add_subregion(sysmem, 0, ram);

    sysctl = qdev_create(NULL, "realview_sysctl");

    qdev_prop_set_uint32(sysctl, "sys_id", 0x41007004);

    qdev_prop_set_uint32(sysctl, "proc_id", 0x02000000);

    qdev_init_nofail(sysctl);

    sysbus_mmio_map(sysbus_from_qdev(sysctl), 0, 0x10000000);

    cpu_pic = arm_pic_init_cpu(env);

    dev = sysbus_create_varargs("pl190", 0x10140000,

                                cpu_pic[0], cpu_pic[1], NULL);

    for (n = 0; n < 32; n++) {

        pic[n] = qdev_get_gpio_in(dev, n);

    }

    dev = sysbus_create_simple("versatilepb_sic", 0x10003000, NULL);

    for (n = 0; n < 32; n++) {

        sysbus_connect_irq(sysbus_from_qdev(dev), n, pic[n]);

        sic[n] = qdev_get_gpio_in(dev, n);

    }

    sysbus_create_simple("pl050_keyboard", 0x10006000, sic[3]);

    sysbus_create_simple("pl050_mouse", 0x10007000, sic[4]);

    dev = qdev_create(NULL, "versatile_pci");

    busdev = sysbus_from_qdev(dev);

    qdev_init_nofail(dev);

    sysbus_mmio_map(busdev, 0, 0x41000000); /* PCI self-config */

    sysbus_mmio_map(busdev, 1, 0x42000000); /* PCI config */

    sysbus_connect_irq(busdev, 0, sic[27]);

    sysbus_connect_irq(busdev, 1, sic[28]);

    sysbus_connect_irq(busdev, 2, sic[29]);

    sysbus_connect_irq(busdev, 3, sic[30]);

    pci_bus = (PCIBus *)qdev_get_child_bus(dev, "pci");

    /* The Versatile PCI bridge does not provide access to PCI IO space,

       so many of the qemu PCI devices are not useable.  */

    for(n = 0; n < nb_nics; n++) {

        nd = &nd_table[n];

        if (!done_smc && (!nd->model || strcmp(nd->model, "smc91c111") == 0)) {

            smc91c111_init(nd, 0x10010000, sic[25]);

            done_smc = 1;

        } else {

            pci_nic_init_nofail(nd, "rtl8139", NULL);

        }

    }

    if (usb_enabled) {

        pci_create_simple(pci_bus, -1, "pci-ohci");

    }

    n = drive_get_max_bus(IF_SCSI);

    while (n >= 0) {

        pci_create_simple(pci_bus, -1, "lsi53c895a");

        n--;

    }

    sysbus_create_simple("pl011", 0x101f1000, pic[12]);

    sysbus_create_simple("pl011", 0x101f2000, pic[13]);

    sysbus_create_simple("pl011", 0x101f3000, pic[14]);

    sysbus_create_simple("pl011", 0x10009000, sic[6]);

    sysbus_create_simple("pl080", 0x10130000, pic[17]);

    sysbus_create_simple("sp804", 0x101e2000, pic[4]);

    sysbus_create_simple("sp804", 0x101e3000, pic[5]);

    /* The versatile/PB actually has a modified Color LCD controller

       that includes hardware cursor support from the PL111.  */

    dev = sysbus_create_simple("pl110_versatile", 0x10120000, pic[16]);

    /* Wire up the mux control signals from the SYS_CLCD register */

    qdev_connect_gpio_out(sysctl, 0, qdev_get_gpio_in(dev, 0));

    sysbus_create_varargs("pl181", 0x10005000, sic[22], sic[1], NULL);

    sysbus_create_varargs("pl181", 0x1000b000, sic[23], sic[2], NULL);

    /* Add PL031 Real Time Clock. */

    sysbus_create_simple("pl031", 0x101e8000, pic[10]);

    /* Add PL041 AACI Interface to the LM4549 codec */

    pl041 = qdev_create(NULL, "pl041");

    qdev_prop_set_uint32(pl041, "nc_fifo_depth", 512);

    qdev_init_nofail(pl041);

    sysbus_mmio_map(sysbus_from_qdev(pl041), 0, 0x10004000);

    sysbus_connect_irq(sysbus_from_qdev(pl041), 0, sic[24]);

    /* Memory map for Versatile/PB:  */

    /* 0x10000000 System registers.  */

    /* 0x10001000 PCI controller config registers.  */

    /* 0x10002000 Serial bus interface.  */

    /*  0x10003000 Secondary interrupt controller.  */

    /* 0x10004000 AACI (audio).  */

    /*  0x10005000 MMCI0.  */

    /*  0x10006000 KMI0 (keyboard).  */

    /*  0x10007000 KMI1 (mouse).  */

    /* 0x10008000 Character LCD Interface.  */

    /*  0x10009000 UART3.  */

    /* 0x1000a000 Smart card 1.  */

    /*  0x1000b000 MMCI1.  */

    /*  0x10010000 Ethernet.  */

    /* 0x10020000 USB.  */

    /* 0x10100000 SSMC.  */

    /* 0x10110000 MPMC.  */

    /*  0x10120000 CLCD Controller.  */

    /*  0x10130000 DMA Controller.  */

    /*  0x10140000 Vectored interrupt controller.  */

    /* 0x101d0000 AHB Monitor Interface.  */

    /* 0x101e0000 System Controller.  */

    /* 0x101e1000 Watchdog Interface.  */

    /* 0x101e2000 Timer 0/1.  */

    /* 0x101e3000 Timer 2/3.  */

    /* 0x101e4000 GPIO port 0.  */

    /* 0x101e5000 GPIO port 1.  */

    /* 0x101e6000 GPIO port 2.  */

    /* 0x101e7000 GPIO port 3.  */

    /* 0x101e8000 RTC.  */

    /* 0x101f0000 Smart card 0.  */

    /*  0x101f1000 UART0.  */

    /*  0x101f2000 UART1.  */

    /*  0x101f3000 UART2.  */

    /* 0x101f4000 SSPI.  */

    versatile_binfo.ram_size = ram_size;

    versatile_binfo.kernel_filename = kernel_filename;

    versatile_binfo.kernel_cmdline = kernel_cmdline;

    versatile_binfo.initrd_filename = initrd_filename;

    versatile_binfo.board_id = board_id;

    arm_load_kernel(env, &versatile_binfo);

}

static void vpb_init(ram_addr_t ram_size,

                     const char *boot_device,

                     const char *kernel_filename, const char *kernel_cmdline,

                     const char *initrd_filename, const char *cpu_model)

{

    versatile_init(ram_size,

                   boot_device,

                   kernel_filename, kernel_cmdline,

                   initrd_filename, cpu_model, 0x183);

}

static void vab_init(ram_addr_t ram_size,

                     const char *boot_device,

                     const char *kernel_filename, const char *kernel_cmdline,

                     const char *initrd_filename, const char *cpu_model)

{

    versatile_init(ram_size,

                   boot_device,

                   kernel_filename, kernel_cmdline,

                   initrd_filename, cpu_model, 0x25e);

}

static QEMUMachine versatilepb_machine = {

    .name = "versatilepb",

    .desc = "ARM Versatile/PB (ARM926EJ-S)",

    .init = vpb_init,

    .use_scsi = 1,

};

static QEMUMachine versatileab_machine = {

    .name = "versatileab",

    .desc = "ARM Versatile/AB (ARM926EJ-S)",

    .init = vab_init,

    .use_scsi = 1,

};

static void versatile_machine_init(void)

{

    qemu_register_machine(&versatilepb_machine);

    qemu_register_machine(&versatileab_machine);

}

machine_init(versatile_machine_init);

static void vpb_sic_class_init(ObjectClass *klass, void *data)

{

    DeviceClass *dc = DEVICE_CLASS(klass);

    SysBusDeviceClass *k = SYS_BUS_DEVICE_CLASS(klass);

    k->init = vpb_sic_init;

    dc->no_user = 1;

    dc->vmsd = &vmstate_vpb_sic;

}

static TypeInfo vpb_sic_info = {

    .name          = "versatilepb_sic",

    .parent        = TYPE_SYS_BUS_DEVICE,

    .instance_size = sizeof(vpb_sic_state),

    .class_init    = vpb_sic_class_init,

};

static void versatilepb_register_types(void)

{

    type_register_static(&vpb_sic_info);

}

type_init(versatilepb_register_types)