root / hw / max7310.c @ 4677d8ed
History | View | Annotate | Download (5 kB)
1 |
/*
|
---|---|
2 |
* MAX7310 8-port GPIO expansion chip.
|
3 |
*
|
4 |
* Copyright (c) 2006 Openedhand Ltd.
|
5 |
* Written by Andrzej Zaborowski <balrog@zabor.org>
|
6 |
*
|
7 |
* This file is licensed under GNU GPL.
|
8 |
*/
|
9 |
|
10 |
#include "i2c.h" |
11 |
|
12 |
typedef struct { |
13 |
i2c_slave i2c; |
14 |
int i2c_command_byte;
|
15 |
int len;
|
16 |
|
17 |
uint8_t level; |
18 |
uint8_t direction; |
19 |
uint8_t polarity; |
20 |
uint8_t status; |
21 |
uint8_t command; |
22 |
qemu_irq handler[8];
|
23 |
qemu_irq *gpio_in; |
24 |
} MAX7310State; |
25 |
|
26 |
void max7310_reset(i2c_slave *i2c)
|
27 |
{ |
28 |
MAX7310State *s = (MAX7310State *) i2c; |
29 |
s->level &= s->direction; |
30 |
s->direction = 0xff;
|
31 |
s->polarity = 0xf0;
|
32 |
s->status = 0x01;
|
33 |
s->command = 0x00;
|
34 |
} |
35 |
|
36 |
static int max7310_rx(i2c_slave *i2c) |
37 |
{ |
38 |
MAX7310State *s = (MAX7310State *) i2c; |
39 |
|
40 |
switch (s->command) {
|
41 |
case 0x00: /* Input port */ |
42 |
return s->level ^ s->polarity;
|
43 |
break;
|
44 |
|
45 |
case 0x01: /* Output port */ |
46 |
return s->level & ~s->direction;
|
47 |
break;
|
48 |
|
49 |
case 0x02: /* Polarity inversion */ |
50 |
return s->polarity;
|
51 |
|
52 |
case 0x03: /* Configuration */ |
53 |
return s->direction;
|
54 |
|
55 |
case 0x04: /* Timeout */ |
56 |
return s->status;
|
57 |
break;
|
58 |
|
59 |
case 0xff: /* Reserved */ |
60 |
return 0xff; |
61 |
|
62 |
default:
|
63 |
#ifdef VERBOSE
|
64 |
printf("%s: unknown register %02x\n", __FUNCTION__, s->command);
|
65 |
#endif
|
66 |
break;
|
67 |
} |
68 |
return 0xff; |
69 |
} |
70 |
|
71 |
static int max7310_tx(i2c_slave *i2c, uint8_t data) |
72 |
{ |
73 |
MAX7310State *s = (MAX7310State *) i2c; |
74 |
uint8_t diff; |
75 |
int line;
|
76 |
|
77 |
if (s->len ++ > 1) { |
78 |
#ifdef VERBOSE
|
79 |
printf("%s: message too long (%i bytes)\n", __FUNCTION__, s->len);
|
80 |
#endif
|
81 |
return 1; |
82 |
} |
83 |
|
84 |
if (s->i2c_command_byte) {
|
85 |
s->command = data; |
86 |
s->i2c_command_byte = 0;
|
87 |
return 0; |
88 |
} |
89 |
|
90 |
switch (s->command) {
|
91 |
case 0x01: /* Output port */ |
92 |
for (diff = (data ^ s->level) & ~s->direction; diff;
|
93 |
diff &= ~(1 << line)) {
|
94 |
line = ffs(diff) - 1;
|
95 |
if (s->handler[line])
|
96 |
qemu_set_irq(s->handler[line], (data >> line) & 1);
|
97 |
} |
98 |
s->level = (s->level & s->direction) | (data & ~s->direction); |
99 |
break;
|
100 |
|
101 |
case 0x02: /* Polarity inversion */ |
102 |
s->polarity = data; |
103 |
break;
|
104 |
|
105 |
case 0x03: /* Configuration */ |
106 |
s->level &= ~(s->direction ^ data); |
107 |
s->direction = data; |
108 |
break;
|
109 |
|
110 |
case 0x04: /* Timeout */ |
111 |
s->status = data; |
112 |
break;
|
113 |
|
114 |
case 0x00: /* Input port - ignore writes */ |
115 |
break;
|
116 |
default:
|
117 |
#ifdef VERBOSE
|
118 |
printf("%s: unknown register %02x\n", __FUNCTION__, s->command);
|
119 |
#endif
|
120 |
return 1; |
121 |
} |
122 |
|
123 |
return 0; |
124 |
} |
125 |
|
126 |
static void max7310_event(i2c_slave *i2c, enum i2c_event event) |
127 |
{ |
128 |
MAX7310State *s = (MAX7310State *) i2c; |
129 |
s->len = 0;
|
130 |
|
131 |
switch (event) {
|
132 |
case I2C_START_SEND:
|
133 |
s->i2c_command_byte = 1;
|
134 |
break;
|
135 |
case I2C_FINISH:
|
136 |
#ifdef VERBOSE
|
137 |
if (s->len == 1) |
138 |
printf("%s: message too short (%i bytes)\n", __FUNCTION__, s->len);
|
139 |
#endif
|
140 |
break;
|
141 |
default:
|
142 |
break;
|
143 |
} |
144 |
} |
145 |
|
146 |
static const VMStateDescription vmstate_max7310 = { |
147 |
.name = "max7310",
|
148 |
.version_id = 0,
|
149 |
.minimum_version_id = 0,
|
150 |
.minimum_version_id_old = 0,
|
151 |
.fields = (VMStateField []) { |
152 |
VMSTATE_INT32(i2c_command_byte, MAX7310State), |
153 |
VMSTATE_INT32(len, MAX7310State), |
154 |
VMSTATE_UINT8(level, MAX7310State), |
155 |
VMSTATE_UINT8(direction, MAX7310State), |
156 |
VMSTATE_UINT8(polarity, MAX7310State), |
157 |
VMSTATE_UINT8(status, MAX7310State), |
158 |
VMSTATE_UINT8(command, MAX7310State), |
159 |
VMSTATE_I2C_SLAVE(i2c, MAX7310State), |
160 |
VMSTATE_END_OF_LIST() |
161 |
} |
162 |
}; |
163 |
|
164 |
static void max7310_gpio_set(void *opaque, int line, int level) |
165 |
{ |
166 |
MAX7310State *s = (MAX7310State *) opaque; |
167 |
if (line >= ARRAY_SIZE(s->handler) || line < 0) |
168 |
hw_error("bad GPIO line");
|
169 |
|
170 |
if (level)
|
171 |
s->level |= s->direction & (1 << line);
|
172 |
else
|
173 |
s->level &= ~(s->direction & (1 << line));
|
174 |
} |
175 |
|
176 |
/* MAX7310 is SMBus-compatible (can be used with only SMBus protocols),
|
177 |
* but also accepts sequences that are not SMBus so return an I2C device. */
|
178 |
static int max7310_init(i2c_slave *i2c) |
179 |
{ |
180 |
MAX7310State *s = FROM_I2C_SLAVE(MAX7310State, i2c); |
181 |
|
182 |
s->gpio_in = qemu_allocate_irqs(max7310_gpio_set, s, |
183 |
ARRAY_SIZE(s->handler)); |
184 |
|
185 |
max7310_reset(&s->i2c); |
186 |
|
187 |
vmstate_register(-1, &vmstate_max7310, s);
|
188 |
return 0; |
189 |
} |
190 |
|
191 |
qemu_irq *max7310_gpio_in_get(i2c_slave *i2c) |
192 |
{ |
193 |
MAX7310State *s = (MAX7310State *) i2c; |
194 |
return s->gpio_in;
|
195 |
} |
196 |
|
197 |
void max7310_gpio_out_set(i2c_slave *i2c, int line, qemu_irq handler) |
198 |
{ |
199 |
MAX7310State *s = (MAX7310State *) i2c; |
200 |
if (line >= ARRAY_SIZE(s->handler) || line < 0) |
201 |
hw_error("bad GPIO line");
|
202 |
|
203 |
s->handler[line] = handler; |
204 |
} |
205 |
|
206 |
static I2CSlaveInfo max7310_info = {
|
207 |
.qdev.name = "max7310",
|
208 |
.qdev.size = sizeof(MAX7310State),
|
209 |
.init = max7310_init, |
210 |
.event = max7310_event, |
211 |
.recv = max7310_rx, |
212 |
.send = max7310_tx |
213 |
}; |
214 |
|
215 |
static void max7310_register_devices(void) |
216 |
{ |
217 |
i2c_register_slave(&max7310_info); |
218 |
} |
219 |
|
220 |
device_init(max7310_register_devices) |